3 # Refer to devd.conf(5) and devd(8) man pages for the details on how to
4 # run and configure devd.
7 # NB: All regular expressions have an implicit ^$ around them.
8 # NB: device-name is shorthand for 'match device-name'
11 # Each "directory" directive adds a directory to the list of
12 # directories that we scan for files. Files are loaded in the order
13 # that they are returned from readdir(3). The rule-sets are combined
14 # to create a DFA that's used to match events to actions.
15 directory "/etc/devd";
16 directory "/usr/local/etc/devd";
17 pid-file "/var/run/devd.pid";
19 # Setup some shorthand for regex that we use later in the file.
20 #XXX Yes, these are gross -- imp
21 set scsi-controller-regex
22 "(aac|adv|adw|aha|ahc|ahd|aic|amr|bt|ciss|dpt|\
23 esp|ida|iir|ips|isp|mlx|mly|mpr|mps|mpt|ncr|ncv|nsp|stg|sym|\
27 "(ath|bwi|bwn|ipw|iwi|iwm|iwn|malo|mwl|ral|rsu|rtwn|rum|run|\
28 uath|upgt|ural|urtw|wi|wpi|wtap|zyd)[0-9]+";
31 # Note that the attach/detach with the highest value wins, so that one can
32 # override these general rules.
35 # Configure the interface on attach. Due to a historical accident, this
36 # script is called pccard_ether.
38 # NB: DETACH events are ignored; the kernel should handle all cleanup
39 # (routes, arp cache). Beware of races against immediate create
40 # of a device with the same name; e.g.
41 # ifconfig bridge0 destroy; ifconfig bridge0 create
44 match "system" "IFNET";
45 match "subsystem" "!usbus[0-9]+";
46 match "type" "ATTACH";
47 action "/etc/pccard_ether $subsystem start";
51 # Try to start dhclient on Ethernet-like interfaces when the link comes
52 # up. Only devices that are configured to support DHCP will actually
53 # run it. No link down rule exists because dhclient automatically exits
54 # when the link goes down.
57 match "system" "IFNET";
58 match "type" "LINK_UP";
59 media-type "ethernet";
60 action "/etc/rc.d/dhclient quietstart $subsystem";
64 # Like Ethernet devices, but separate because 802.11 require spawning
68 device-name "$wifi-driver-regex";
69 action "/etc/pccard_ether $device-name startchildren";
72 device-name "$wifi-driver-regex";
73 action "/etc/pccard_ether $device-name stopchildren";
76 match "system" "IFNET";
77 match "type" "LINK_UP";
79 action "/etc/rc.d/dhclient quietstart $subsystem";
82 # An entry like this might be in a different file, but is included here
83 # as an example of how to override things. Normally 'ed50' would match
84 # the above attach/detach stuff, but the value of 100 makes it
85 # hard wired to 1.2.3.4.
88 action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
94 # When a USB Bluetooth dongle appears, activate it
96 device-name "ubt[0-9]+";
97 action "/etc/rc.d/bluetooth quietstart $device-name";
100 device-name "ubt[0-9]+";
101 action "/etc/rc.d/bluetooth quietstop $device-name";
104 # Firmware downloader for Atheros AR3011 based USB Bluetooth devices
106 # match "vendor" "0x0cf3";
107 # match "product" "0x3000";
108 # action "sleep 2 && /usr/sbin/ath3kfw -d $device-name -f /usr/local/etc/ath3k-1.fw";
111 # When a USB keyboard arrives, attach it as the console keyboard.
114 action "/etc/rc.d/syscons setkeyboard /dev/ukbd0";
118 action "/etc/rc.d/syscons setkeyboard /dev/kbd0";
122 match "system" "DEVFS";
123 match "subsystem" "CDEV";
124 match "type" "CREATE";
125 match "cdev" "atp[0-9]+";
127 action "/etc/rc.d/moused quietstart $cdev";
131 match "system" "DEVFS";
132 match "subsystem" "CDEV";
133 match "type" "CREATE";
134 match "cdev" "ums[0-9]+";
136 action "/etc/rc.d/moused quietstart $cdev";
140 match "system" "DEVFS";
141 match "subsystem" "CDEV";
142 match "type" "CREATE";
143 match "cdev" "wsp[0-9]+";
145 action "/etc/rc.d/moused quietstart $cdev";
149 match "system" "DEVFS";
150 match "subsystem" "CDEV";
151 match "type" "DESTROY";
152 match "cdev" "ums[0-9]+";
154 action "/etc/rc.d/moused stop $cdev";
157 # Firmware download into the ActiveWire board. After the firmware download is
158 # done, the device detaches and reappears as something new and shiny
161 match "vendor" "0x0854";
162 match "product" "0x0100";
163 match "release" "0x0000";
164 action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name";
167 # Firmware download for Entrega Serial DB25 adapter.
169 match "vendor" "0x1645";
170 match "product" "0x8001";
171 match "release" "0x0101";
172 action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi; /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name";
175 # This entry starts the ColdSync tool in daemon mode. Make sure you have an up
176 # to date /usr/local/etc/palms. We override the 'listen' settings for port and
177 # type in /usr/local/etc/coldsync.conf.
179 match "system" "USB";
180 match "subsystem" "DEVICE";
181 match "type" "ATTACH";
182 match "vendor" "0x082d";
183 match "product" "0x0100";
184 match "release" "0x0100";
185 action "/usr/local/bin/coldsync -md -p /dev/$cdev -t usb";
189 # Rescan SCSI device-names on attach, but not detach. However, it is
190 # disabled by default due to reports of problems.
193 device-name "$scsi-controller-regex";
194 // action "camcontrol rescan all";
197 # Don't even try to second guess what to do about drivers that don't
198 # match here. Instead, pass it off to syslog. Commented out for the
199 # moment, as the pnpinfo variable isn't set in devd yet. Individual
200 # variables within the bus supplied pnpinfo are set.
202 # action "logger Unknown device: $pnpinfo $location $bus";
205 # Various logging of unknown devices.
207 match "bus" "uhub[0-9]+";
208 action "logger Unknown USB device: vendor $vendor product $product \
212 # Some PC-CARDs don't offer numerical manufacturer/product IDs, just
213 # show the CIS info there.
215 match "bus" "pccard[0-9]+";
216 match "manufacturer" "0xffffffff";
217 match "product" "0xffffffff";
218 action "logger Unknown PCCARD device: CISproduct $cisproduct \
219 CIS-vendor $cisvendor bus $bus";
223 match "bus" "pccard[0-9]+";
224 action "logger Unknown PCCARD device: manufacturer $manufacturer \
225 product $product CISproduct $cisproduct CIS-vendor \
226 $cisvendor bus $bus";
230 match "bus" "cardbus[0-9]+";
231 action "logger Unknown Cardbus device: device $device class $class \
232 vendor $vendor bus $bus";
235 # Switch power profiles when the AC line state changes.
237 match "system" "ACPI";
238 match "subsystem" "ACAD";
239 action "/etc/rc.d/power_profile $notify";
242 # Notify all users before beginning emergency shutdown when we get
243 # a _CRT or _HOT thermal event and we're going to power down the system
246 match "system" "ACPI";
247 match "subsystem" "Thermal";
248 match "notify" "0xcc";
249 action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
252 # User requested suspend, so perform preparation steps and then execute
253 # the actual suspend process.
255 match "system" "ACPI";
256 match "subsystem" "Suspend";
257 action "/etc/rc.suspend acpi $notify";
260 match "system" "ACPI";
261 match "subsystem" "Resume";
262 action "/etc/rc.resume acpi $notify";
265 /* EXAMPLES TO END OF FILE
267 # An example of something that a vendor might install if you were to
268 # add their device. This might reside in /usr/local/etc/devd/deqna.conf.
269 # A deqna is, in this hypothetical example, a pccard ethernet-like device.
270 # Students of history may know other devices by this name, and will get
271 # the in-jokes in this entry.
273 match "bus" "pccard[0-9]+";
274 match "manufacturer" "0x1234";
275 match "product" "0x2323";
276 action "kldload -n if_deqna";
279 device-name "deqna[0-9]+";
280 action "/etc/pccard_ether $device-name start";
283 device-name "deqna[0-9]+";
284 action "/etc/pccard_ether $device-name stop";
287 # Examples of notify hooks. A notify is a generic way for a kernel
288 # subsystem to send event notification to userland.
290 # Here are some examples of ACPI notify handlers. ACPI subsystems that
291 # generate notifies include the AC adapter, power/sleep buttons,
292 # control method batteries, lid switch, and thermal zones.
294 # Information returned is not always the same as the ACPI notify
295 # events. See the ACPI specification for more information about
296 # notifies. Here is the information returned for each subsystem:
298 # ACAD: AC line state (0 is offline, 1 is online)
299 # Button: Button pressed (0 for power, 1 for sleep)
300 # CMBAT: ACPI battery events
301 # Lid: Lid state (0 is closed, 1 is open)
302 # Suspend, Resume: Suspend and resume notification
303 # Thermal: ACPI thermal zone events
305 # This example calls a script when the AC state changes, passing the
306 # notify value as the first argument. If the state is 0x00, it might
307 # call some sysctls to implement economy mode. If 0x01, it might set
308 # the mode to performance.
310 match "system" "ACPI";
311 match "subsystem" "ACAD";
312 action "/etc/acpi_ac $notify";
315 # This example works around a memory leak in PostgreSQL, restarting
316 # it when the "user:postgres:swap:devctl=1G" rctl(8) rule gets triggered.
318 match "system" "RCTL";
319 match "rule" "user:770:swap:.*";
320 action "/usr/local/etc/rc.d/postgresql restart";
323 # Discard autofs caches, useful for the -media special map.
325 match "system" "GEOM";
326 match "subsystem" "DEV";
327 action "/usr/sbin/automount -c";
330 # Handle userland coredumps.
331 # This commented out handler makes it possible to run an
332 # automated debugging session after the core dump is generated.
333 # Replace action with a proper coredump handler, but be aware that
334 # it will run with elevated privileges.
336 match "system" "kernel";
337 match "subsystem" "signal";
338 match "type" "coredump";
339 action "logger $comm $core";