3 # Refer to devd.conf(5) and devd(8) man pages for the details on how to
4 # run and configure devd.
7 # NB: All regular expressions have an implicit ^$ around them.
8 # NB: device-name is shorthand for 'match device-name'
11 # Each directory directive adds a directory the list of directories
12 # that we scan for files. Files are read-in in the order that they
13 # are returned from readdir(3). The rule-sets are combined to
14 # create a DFA that's used to match events to actions.
15 directory "/etc/devd";
16 directory "/usr/local/etc/devd";
17 pid-file "/var/run/devd.pid";
19 # Setup some shorthand for regex that we use later in the file.
20 set ethernet-nic-regex
21 "(an|ar|ath|aue|awi|axe|bfe|bge|cm|cnw|cs|cue|dc|de|ed|el|em|\
22 ep|ex|fe|fxp|gem|hme|ie|kue|lge|lnc|my|nge|pcn|ray|re|rl|rue|\
23 sf|sis|sk|sn|snc|ste|ti|tl|tx|txp|udav|vge|vr|vx|wb|wi|xe|xl)\
25 set scsi-controller-regex
26 "(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
27 ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
31 # Note that the attach/detach with the highest value wins, so that one can
32 # override these general rules.
35 # For ethernet like devices, the default is to run dhclient. Due to
36 # a historical accident, this script is called pccard_ether.
39 device-name "$ethernet-nic-regex";
40 action "/etc/pccard_ether $device-name start";
44 device-name "$ethernet-nic-regex";
45 action "/etc/pccard_ether $device-name stop";
48 # An entry like this might be in a different file, but is included here
49 # as an example of how to override things. Normally 'ed50' would match
50 # the above attach/detach stuff, but the value of 100 makes it
51 # hard wired to 1.2.3.4.
54 action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
60 # When a USB keyboard arrives, attach it as the console keyboard.
63 action "kbdcontrol -k /dev/ukbd0 < /dev/console";
67 action "kbdcontrol -k /dev/kbd0 < /dev/console";
70 # The entry below starts moused when a mouse is plugged in. Moused
71 # stops automatically (actually it bombs :) when the device disappears.
73 device-name "ums[0-9]+";
74 action "/etc/rc.d/moused start $device-name";
78 # Rescan scsi device-names on attach, but not detach.
81 device-name "$scsi-controller-regex";
82 // action "camcontrol rescan all";
85 # Don't even try to second guess what to do about drivers that don't
86 # match here. Instead, pass it off to syslog. Commented out for the
87 # moment, as pnpinfo isn't set in devd yet.
89 # action "logger Unknown device: $pnpinfo $location $bus";
92 # Switch power profiles when the AC line state changes.
94 match "system" "ACPI";
95 match "subsystem" "ACAD";
96 action "/etc/rc.d/power_profile $notify";
99 # Notify all users before beginning emergency shutdown when we get
100 # a _CRT or _HOT thermal event and we're going to power down the system
103 match "system" "ACPI";
104 match "subsystem" "Thermal";
105 match "notify" "0xcc";
106 action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
109 /* EXAMPLES TO END OF FILE
111 # The following might be an example of something that a vendor might
112 # install if you were to add their device. This might reside in
113 # /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical
114 # example, a pccard ethernet-like device. Students of history may
115 # know other devices by this name, and will get the in-jokes in this
118 match "bus" "pccard[0-9]+";
119 match "manufacturer" "0x1234";
120 match "product" "0x2323";
121 action "kldload if_deqna";
124 device-name "deqna[0-9]+";
125 action "/etc/pccard_ether $device-name start";
128 device-name "deqna[0-9]+";
129 action "/etc/pccard_ether $device-name stop";
132 # Examples of notify hooks. A notify is a generic way for a kernel
133 # subsystem to send event notification to userland.
135 # Here are some examples of ACPI notify handlers. ACPI subsystems that
136 # generate notifies include the AC adapter, power/sleep buttons,
137 # control method batteries, lid switch, and thermal zones.
139 # Information returned is not always the same as the ACPI notify
140 # events. See the ACPI specification for more information about
141 # notifies. Here is the information returned for each subsystem:
143 # ACAD: AC line state (0 is offline, 1 is online)
144 # Button: Button pressed (0 for power, 1 for sleep)
145 # CMBAT: ACPI battery events
146 # Lid: Lid state (0 is closed, 1 is open)
147 # Thermal: ACPI thermal zone events
149 # This example calls a script when the AC state changes, passing the
150 # notify value as the first argument. If the state is 0x00, it might
151 # call some sysctls to implement economy mode. If 0x01, it might set
152 # the mode to performance.
154 match "system" "ACPI";
155 match "subsystem" "ACAD";
156 action "/etc/acpi_ac $notify";