1 # from: @(#)gettytab 5.14 (Berkeley) 3/27/91
3 # Most of the table entries here are just copies of the old getty table,
4 # it is by no means certain, or even likely, that any of them are optimal
5 # for any purpose whatever. Nor is it likely that more than a couple are
8 # The default gettytab entry, used to set defaults for all other
9 # entries, and in cases where getty is called with no table name.
11 # cb, ce and ck are desirable on most crt's. The non-crt entries need to
12 # be changed to turn them off (:cb@:ce@:ck@:).
14 # lc should always be on; it's a remainder of some stone age when there
15 # have been terminals around not being able of handling lower-case
16 # characters. Those terminals aren't supported any longer, but getty is
17 # `smart' about them by default.
19 # Parity defaults to even, but the Pc entry and all the `std' entries
20 # specify no parity. The different parities are:
21 # (none): same as even except -inpck instead of inpck for login.
22 # ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
23 # fake parity. login will use even parity (cs7 parenb -parodd).
24 # op: same as ep except odd parity (cs7 parenb parodd) for login.
26 # ap: same as ep except -inpck instead of inpck for login.
27 # ap overrides op and ep.
28 # np: 1. don't fake parity in getty. The fake parity garbles
29 # characters on non-terminals (like pccons) that don't
30 # support parity. It would probably better for getty not to
31 # try to fake parity. It could just use cbreak mode so as
32 # not to force cs8 and let the hardware handle the parity.
33 # login has to be rely on the hardware anyway.
34 # 2. set PASS8, giving cs8 -parenb -istrip -inpck.
35 # np:ep: same as np except inpck.
36 # np:op: same as np:ep except for parodd (but parodd is overridden).
37 # np:ap: same as np except istrip.
40 :cb:ce:ck:lc:fd#1000:im=\r\nFreeBSD (%h) (%t)\r\n\r\n:sp#1200:
45 # The "std.NNN" names are known to the special case
46 # portselector code in getty, however they can
47 # be assigned to any table desired.
48 # The "NNN-baud" names are known to the special case
49 # autobaud code in getty, and likewise can
50 # be assigned to any table desired (hopefully the same speed).
53 :np:nd#1:cd#1:uc:sp#110:
54 b|std.134|134.5-baud:\
55 :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
57 :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
62 f|std.1200|1200-baud:\
64 6|std.2400|2400-baud:\
66 7|std.4800|4800-baud:\
68 2|std.9600|9600-baud:\
70 g|std.19200|19200-baud:\
72 std.38400|38400-baud:\
74 std.57600|57600-baud:\
76 std.115200|115200-baud:\
80 # Dial in rotary tables, speed selection via 'break'
83 :nx=d1200:cd#2:sp#300:
85 :nx=d150:fd#1:sp#1200:
87 :nx=d110:lm@:tc=150-baud:
92 # Fast dialup terminals, 2400/1200/300 rotary (can start either way)
94 D2400|d2400|Fast-Dial-2400:\
95 :nx=D1200:tc=2400-baud:
96 3|D1200|Fast-Dial-1200:\
97 :nx=D300:tc=1200-baud:
98 5|D300|Fast-Dial-300:\
99 :nx=D2400:tc=300-baud:
105 :nx=t2400:tc=19200-baud:
107 :nx=t1200:tc=2400-baud:
109 :nx=t19200:tc=1200-baud:
115 :nx=t2400a:tc=9600-baud:
117 :nx=t1200a:tc=2400-baud:
119 :nx=t9600:tc=1200-baud:
122 # Odd special case terminals
124 -|tty33|asr33|Pity the poor user of this beast:\
127 4|Console|Console Decwriter II:\
128 :nd@:cd@:rw:tc=300-baud:
130 e|Console-1200|Console Decwriter III:\
131 :fd@:nd@:cd@:rw:tc=1200-baud:
133 i|Interdata console:\
136 l|lsi chess terminal:\
139 X|Xwindow|X window system:\
140 :fd@:nd@:cd@:rw:sp#9600:
146 # Wierdo special case for fast crt's with hardcopy devices
148 8|T9600|CRT with hardcopy:\
149 :nx=T300:tc=9600-baud:
150 9|T300|CRT with hardcopy (300):\
151 :nx=T9600:tc=300-baud:
154 # Plugboard, and misc other terminals
156 plug-9600|Plugboard-9600:\
158 p|P9600|Plugboard-9600-rotary:\
159 :pf#1:nx=P300:tc=9600-baud:
160 q|P300|Plugboard-300:\
161 :pf#1:nx=P1200:tc=300-baud:
162 r|P1200|Plugboard-1200:\
163 :pf#1:nx=P9600:tc=1200-baud:
168 s|DSW|Port Selector:\
172 # Auto-baud speed detect entry for Micom 600.
173 # Special code in getty will switch this out
174 # to one of the NNN-baud entries.