etc/network.subr

   1 #
   2 # Copyright (c) 2003 The FreeBSD Project. All rights reserved.
   3 #
   4 # Redistribution and use in source and binary forms, with or without
   5 # modification, are permitted provided that the following conditions
   6 # are met:
   7 # 1. Redistributions of source code must retain the above copyright
   8 #    notice, this list of conditions and the following disclaimer.
   9 # 2. Redistributions in binary form must reproduce the above copyright
  10 #    notice, this list of conditions and the following disclaimer in the
  11 #    documentation and/or other materials provided with the distribution.
  12 #
  13 # THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
  14 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  15 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  16 # ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
  17 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  18 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  19 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  20 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  21 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  22 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  23 # SUCH DAMAGE.
  24 #
  25 # $FreeBSD$
  26 #
  27
  28 #
  29 # Subroutines commonly used from network startup scripts.
  30 # Requires that rc.conf be loaded first.
  31 #
  32
  33 # ifconfig_up if
  34 #       Evaluate ifconfig(8) arguments for interface $if and
  35 #       run ifconfig(8) with those arguments. It returns 0 if
  36 #       arguments were found and executed or 1 if the interface
  37 #       had no arguments.  Pseudo arguments DHCP and WPA are handled
  38 #       here.
  39 #
  40 ifconfig_up()
  41 {
  42         _cfg=1
  43
  44         ifconfig_args=`ifconfig_getargs $1`
  45         if [ -n "${ifconfig_args}" ]; then
  46                 ifconfig $1 up
  47                 ifconfig $1 ${ifconfig_args}
  48                 _cfg=0
  49         fi
  50
  51         if wpaif $1; then
  52                 if [ $_cfg -ne 0 ] ; then
  53                         ifconfig $1 up
  54                 fi
  55                 /etc/rc.d/wpa_supplicant start $1
  56                 _cfg=0          # XXX: not sure this should count
  57         fi
  58
  59         if dhcpif $1; then
  60                 if [ $_cfg -ne 0 ] ; then
  61                         ifconfig $1 up
  62                 fi
  63                 if syncdhcpif $1; then
  64                         /etc/rc.d/dhclient start $1
  65                 fi
  66                 _cfg=0
  67         fi
  68
  69         return $_cfg
  70 }
  71
  72 # ifconfig_down if
  73 #       returns 1 if wpa_supplicant or dhclient was stopped or
  74 #       the interface exists.
  75 #
  76 ifconfig_down()
  77 {
  78         [ -z "$1" ] && return 1
  79         _cfg=1
  80
  81         if wpaif $1; then
  82                 /etc/rc.d/wpa_supplicant stop $1
  83                 _cfg=0
  84         fi
  85
  86         if dhcpif $1; then
  87                 /etc/rc.d/dhclient stop $1
  88                 _cfg=0
  89         fi
  90
  91         if ifexists $1; then
  92                 ifconfig $1 down
  93                 _cfg=0
  94         fi
  95
  96         return $_cfg
  97 }
  98
  99 # get_if_var if var [default]
 100 #       Return the value of the pseudo-hash corresponding to $if where
 101 #       $var is a string containg the sub-string "IF" which will be
 102 #       replaced with $if after the characters defined in _punct are
 103 #       replaced with '_'. If the variable is unset, replace it with
 104 #       $default if given.
 105 get_if_var()
 106 {
 107         if [ $# -ne 2 -a $# -ne 3 ]; then
 108                 err 3 'USAGE: get_if_var name var [default]'
 109         fi
 110
 111         _if=$1
 112         _punct=". - / +"
 113         for _punct_c in $_punct; do
 114                 _if=`ltr ${_if} ${_punct_c} '_'`
 115         done
 116         _var=$2
 117         _default=$3
 118
 119         prefix=${_var%%IF*}
 120         suffix=${_var##*IF}
 121         eval echo \${${prefix}${_if}${suffix}-${_default}}
 122 }
 123
 124 # _ifconfig_getargs if
 125 #       Echos the arguments for the supplied interface to stdout.
 126 #       returns 1 if empty.  In general, ifconfig_getargs should be used
 127 #       outside this file.
 128 _ifconfig_getargs()
 129 {
 130         _ifn=$1
 131         if [ -z "$_ifn" ]; then
 132                 return 1
 133         fi
 134
 135         get_if_var $_ifn ifconfig_IF "$ifconfig_DEFAULT"
 136 }
 137
 138 # ifconfig_getargs if
 139 #       Takes the result from _ifconfig_getargs and removes pseudo
 140 #       args such as DHCP and WPA.
 141 ifconfig_getargs()
 142 {
 143         _tmpargs=`_ifconfig_getargs $1`
 144         if [ $? -eq 1 ]; then
 145                 return 1
 146         fi
 147         _args=
 148
 149         for _arg in $_tmpargs; do
 150                 case $_arg in
 151                 [Dd][Hh][Cc][Pp]) ;;
 152                 [Nn][Oo][Aa][Uu][Tt][Oo]) ;;
 153                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;;
 154                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;;
 155                 [Ww][Pp][Aa]) ;;
 156                 *)
 157                         _args="$_args $_arg"
 158                         ;;
 159                 esac
 160         done
 161
 162         echo $_args
 163 }
 164
 165 # autoif
 166 #       Returns 0 if the interface should be automaticly configured at
 167 #       boot time and 1 otherwise.
 168 autoif()
 169 {
 170         _tmpargs=`_ifconfig_getargs $1`
 171         for _arg in $_tmpargs; do
 172                 case $_arg in
 173                 [Nn][Oo][Aa][Uu][Tt][Oo])
 174                         return 1
 175                         ;;
 176                 esac
 177         done
 178         return 0
 179 }
 180
 181 # dhcpif if
 182 #       Returns 0 if the interface is a DHCP interface and 1 otherwise.
 183 dhcpif()
 184 {
 185         _tmpargs=`_ifconfig_getargs $1`
 186         for _arg in $_tmpargs; do
 187                 case $_arg in
 188                 [Dd][Hh][Cc][Pp])
 189                         return 0
 190                         ;;
 191                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
 192                         return 0
 193                         ;;
 194                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
 195                         return 0
 196                         ;;
 197                 esac
 198         done
 199         return 1
 200 }
 201
 202 # syncdhcpif
 203 #       Returns 0 if the interface should be configured synchronously and
 204 #       1 otherwise.
 205 syncdhcpif()
 206 {
 207         _tmpargs=`_ifconfig_getargs $1`
 208         for _arg in $_tmpargs; do
 209                 case $_arg in
 210                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
 211                         return 1
 212                         ;;
 213                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
 214                         return 0
 215                         ;;
 216                 esac
 217         done
 218         if checkyesno synchronous_dhclient; then
 219                 return 0
 220         else
 221                 return 1
 222         fi
 223 }
 224
 225 # wpaif if
 226 #       Returns 0 if the interface is a WPA interface and 1 otherwise.
 227 wpaif()
 228 {
 229         _tmpargs=`_ifconfig_getargs $1`
 230         for _arg in $_tmpargs; do
 231                 case $_arg in
 232                 [Ww][Pp][Aa])
 233                         return 0
 234                         ;;
 235                 esac
 236         done
 237         return 1
 238 }
 239
 240 # ipv6if if
 241 #       Returns 0 if the interface should be configured for IPv6 and
 242 #       1 otherwise.
 243 ipv6if()
 244 {
 245         if ! checkyesno ipv6_enable; then
 246                 return 1
 247         fi
 248         case "${ipv6_network_interfaces}" in
 249         [Aa][Uu][Tt][Oo])
 250                 return 0
 251                 ;;
 252         ''|[Nn][Oo][Nn][Ee])
 253                 return 1
 254                 ;;
 255         esac
 256         for v6if in ${ipv6_network_interfaces}; do
 257                 if [ "${v6if}" = "${1}" ]; then
 258                         return 0
 259                 fi
 260         done
 261         return 1
 262 }
 263
 264 # ifexists if
 265 #       Returns 0 if the interface exists and 1 otherwise.
 266 ifexists()
 267 {
 268         ifconfig $1 > /dev/null 2>&1
 269 }
 270
 271 # ipv4_up if
 272 #  add IPv4 addresses to the interface $if
 273 ipv4_up()
 274 {
 275         _if=$1
 276         ifalias_up ${_if}
 277         ipv4_addrs_common ${_if} alias
 278 }
 279
 280 # ipv4_down if
 281 #  remove IPv4 addresses from the interface $if
 282 ipv4_down()
 283 {
 284         _if=$1
 285         _ifs="^"
 286         _ret=1
 287
 288         ifexists ${_if} || return 1
 289
 290         inetList="`ifconfig ${_if} | grep 'inet ' | tr "\n" "$_ifs"`"
 291
 292         oldifs="$IFS"
 293         IFS="$_ifs"
 294         for _inet in $inetList ; do
 295                 # get rid of extraneous line
 296                 [ -z "$_inet" ] && break
 297
 298                 _inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
 299
 300                 IFS="$oldifs"
 301                 ifconfig ${_if} ${_inet} delete
 302                 IFS="$_ifs"
 303                 _ret=0
 304         done
 305         IFS="$oldifs"
 306
 307         ifalias_down ${_if} && _ret=0
 308         ipv4_addrs_common ${_if} -alias && _ret=0
 309
 310         return $_ret
 311 }
 312
 313 # ipv4_addrs_common if action
 314 #   Evaluate the ifconfig_if_ipv4 arguments for interface $if
 315 #   and use $action to add or remove IPv4 addresses from $if.
 316 ipv4_addrs_common()
 317 {
 318         _ret=1
 319         _if=$1
 320         _action=$2
 321
 322         # get ipv4-addresses
 323         cidr_addr=`get_if_var $_if ipv4_addrs_IF`
 324
 325         for _cidr in ${cidr_addr}; do
 326                 _ipaddr=${_cidr%%/*}
 327                 _netmask="/"${_cidr##*/}
 328                 _range=${_ipaddr##*.}
 329                 _ipnet=${_ipaddr%.*}
 330                 _iplow=${_range%-*}
 331                 _iphigh=${_range#*-}
 332
 333                 # clear netmask when removing aliases
 334                 if [ "${_action}" = "-alias" ]; then
 335                         _netmask=""
 336                 fi
 337
 338                 _ipcount=${_iplow}
 339                 while [ "${_ipcount}" -le "${_iphigh}" ]; do
 340                         eval "ifconfig ${_if} ${_action} ${_ipnet}.${_ipcount}${_netmask}"
 341                         _ipcount=$((${_ipcount}+1))
 342                         _ret=0
 343
 344                         # only the first ipaddr in a subnet need the real netmask
 345                         if [ "${_action}" != "-alias" ]; then
 346                                 _netmask="/32"
 347                         fi
 348                 done
 349         done
 350         return $_ret
 351 }
 352
 353 # ifalias_up if
 354 #       Configure aliases for network interface $if.
 355 #       It returns 0 if at least one alias was configured or
 356 #       1 if there were none.
 357 #
 358 ifalias_up()
 359 {
 360         _ret=1
 361         alias=0
 362         while : ; do
 363                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
 364                 if [ -n "${ifconfig_args}" ]; then
 365                         ifconfig $1 ${ifconfig_args} alias
 366                         alias=$((${alias} + 1))
 367                         _ret=0
 368                 else
 369                         break
 370                 fi
 371         done
 372         return $_ret
 373 }
 374
 375 #ifalias_down if
 376 #       Remove aliases for network interface $if.
 377 #       It returns 0 if at least one alias was removed or
 378 #       1 if there were none.
 379 #
 380 ifalias_down()
 381 {
 382         _ret=1
 383         alias=0
 384         while : ; do
 385                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
 386                 if [ -n "${ifconfig_args}" ]; then
 387                         ifconfig $1 ${ifconfig_args} -alias
 388                         alias=$((${alias} + 1))
 389                         _ret=0
 390                 else
 391                         break
 392                 fi
 393         done
 394         return $_ret
 395 }
 396
 397 # ifscript_up if
 398 #       Evaluate a startup script for the $if interface.
 399 #       It returns 0 if a script was found and processed or
 400 #       1 if no script was found.
 401 #
 402 ifscript_up()
 403 {
 404         if [ -r /etc/start_if.$1 ]; then
 405                 . /etc/start_if.$1
 406                 return 0
 407         fi
 408         return 1
 409 }
 410
 411 # ifscript_down if
 412 #       Evaluate a shutdown script for the $if interface.
 413 #       It returns 0 if a script was found and processed or
 414 #       1 if no script was found.
 415 #
 416 ifscript_down()
 417 {
 418         if [ -r /etc/stop_if.$1 ]; then
 419                 . /etc/stop_if.$1
 420                 return 0
 421         fi
 422         return 1
 423 }
 424
 425 # Create cloneable interfaces.
 426 #
 427 clone_up()
 428 {
 429         _prefix=
 430         _list=
 431         for ifn in ${cloned_interfaces}; do
 432                 ifconfig ${ifn} create
 433                 if [ $? -eq 0 ]; then
 434                         _list="${_list}${_prefix}${ifn}"
 435                         [ -z "$_prefix" ] && _prefix=' '
 436                 fi
 437         done
 438         debug "Cloned: ${_list}"
 439 }
 440
 441 # Destroy cloned interfaces. Destroyed interfaces are echoed
 442 # to standard output.
 443 #
 444 clone_down()
 445 {
 446         _prefix=
 447         _list=
 448         for ifn in ${cloned_interfaces}; do
 449                 ifconfig ${ifn} destroy
 450                 if [ $? -eq 0 ]; then
 451                         _list="${_list}${_prefix}${ifn}"
 452                         [ -z "$_prefix" ] && _prefix=' '
 453                 fi
 454         done
 455         debug "Destroyed clones: ${_list}"
 456 }
 457
 458 # Create netgraph nodes.
 459 #
 460 ng_mkpeer() {
 461         ngctl -f - 2> /dev/null <<EOF
 462 mkpeer $*
 463 msg dummy nodeinfo
 464 EOF
 465 }
 466
 467 ng_create_one() {
 468         ng_mkpeer $* | while read line; do
 469                 t=`expr "${line}" : '.* name="\([a-z]*[0-9]*\)" .*'`
 470                 if [ -n "${t}" ]; then
 471                         echo ${t}
 472                         return
 473                 fi
 474         done
 475 }
 476
 477 gif_up() {
 478         # The following must be removed once RELENG_7 is branched.
 479         case ${gif_interfaces} in
 480         [Nn][Oo])
 481                 warn "gif_interfaces=\"NO\" is deprecated, use gif_interfaces=\"\" instead."
 482                 gif_interfaces=""
 483                 ;;
 484         esac
 485
 486         for i in ${gif_interfaces}; do
 487                 peers=`get_if_var $i gifconfig_IF`
 488                 case ${peers} in
 489                 '')
 490                         continue
 491                         ;;
 492                 *)
 493                         ifconfig $i create >/dev/null 2>&1
 494                         ifconfig $i tunnel ${peers}
 495                         ifconfig $i up
 496                         ;;
 497                 esac
 498         done
 499 }
 500
 501 # ng_fec_create ifn
 502 # Configure Fast EtherChannel for interface $ifn. Returns 0 if FEC
 503 # arguments were found and configured; returns !0 otherwise.
 504 ng_fec_create() {
 505          local req_iface iface bogus
 506          req_iface="$1"
 507
 508          ngctl shutdown ${req_iface}: > /dev/null 2>&1
 509
 510          bogus=""
 511          while true; do
 512                  iface=`ng_create_one fec dummy fec`
 513                  if [ -z "${iface}" ]; then
 514                          exit 2
 515                  fi
 516                  if [ "${iface}" = "${req_iface}" ]; then
 517                          break
 518                  fi
 519                  bogus="${bogus} ${iface}"
 520          done
 521
 522          for iface in ${bogus}; do
 523                  ngctl shutdown ${iface}:
 524          done
 525 }
 526
 527 fec_up() {
 528         for i in ${fec_interfaces}; do
 529                 ng_fec_create $i
 530                 for j in `get_if_var $i fecconfig_IF`; do
 531                         case ${j} in
 532                         '')
 533                                 continue
 534                                 ;;
 535                         *)
 536                                 ngctl msg ${i}: add_iface "\"${j}\""
 537                                 ;;
 538                         esac
 539                 done
 540         done
 541 }
 542
 543 #
 544 # ipx_up ifn
 545 # Configure any IPX addresses for interface $ifn. Returns 0 if IPX
 546 # arguments were found and configured; returns 1 otherwise.
 547 #
 548 ipx_up()
 549 {
 550         ifn="$1"
 551         ifconfig_args=`get_if_var $ifn ifconfig_IF_ipx`
 552         if [ -n "${ifconfig_args}" ]; then
 553                 ifconfig ${ifn} ${ifconfig_args}
 554                 return 0
 555         fi
 556         return 1
 557 }
 558
 559 # ipx_down ifn
 560 #       Remove IPX addresses for interface $ifn. Returns 0 if IPX
 561 #       addresses were found and unconfigured. It returns 1, otherwise.
 562 #
 563 ipx_down()
 564 {
 565         [ -z "$1" ] && return 1
 566         _ifs="^"
 567         _ret=1
 568
 569         ifexists $1 || return 1
 570
 571         ipxList="`ifconfig $1 | grep 'ipx ' | tr "\n" "$_ifs"`"
 572
 573         oldifs="$IFS"
 574         IFS="$_ifs"
 575         for _ipx in $ipxList ; do
 576                 # get rid of extraneous line
 577                 [ -z "$_ipx" ] && break
 578
 579                 _ipx=`expr "$_ipx" : '.*\(ipx [0-9a-h]\{1,8\}H*\.[0-9a-h]\{1,12\}\).*'`
 580
 581                 IFS="$oldifs"
 582                 ifconfig $1 ${_ipx} delete
 583                 IFS="$_ifs"
 584                 _ret=0
 585         done
 586         IFS="$oldifs"
 587
 588         return $_ret
 589 }
 590
 591 # ifnet_rename
 592 #       Rename all requested interfaces.
 593 #
 594 ifnet_rename()
 595 {
 596
 597         _ifn_list="`ifconfig -l`"
 598         [ -z "$_ifn_list" ] && return 0
 599         for _if in ${_ifn_list} ; do
 600                 _ifname=`get_if_var $_if ifconfig_IF_name`
 601                 if [ ! -z "$_ifname" ]; then
 602                         ifconfig $_if name $_ifname
 603                 fi
 604         done
 605         return 0
 606 }
 607
 608 #
 609 # list_net_interfaces type
 610 #       List all network interfaces. The type of interface returned
 611 #       can be controlled by the type argument. The type
 612 #       argument can be any of the following:
 613 #               nodhcp - all interfaces, excluding DHCP configured interfaces
 614 #               dhcp   - list only DHCP configured interfaces
 615 #       If no argument is specified all network interfaces are output.
 616 #       Note that the list will include cloned interfaces if applicable.
 617 #       Cloned interfaces must already exist to have a chance to appear
 618 #       in the list if ${network_interfaces} is set to `auto'.
 619 #
 620 list_net_interfaces()
 621 {
 622         type=$1
 623
 624         # Get a list of ALL the interfaces and make lo0 first if it's there.
 625         #
 626         case ${network_interfaces} in
 627         [Aa][Uu][Tt][Oo])
 628                 _prefix=''
 629                 _autolist="`ifconfig -l`"
 630                 _lo=
 631                 for _if in ${_autolist} ; do
 632                         if autoif $_if; then
 633                                 if [ "$_if" = "lo0" ]; then
 634                                         _lo="lo0 "
 635                                 else
 636                                         _tmplist="${_tmplist}${_prefix}${_if}"
 637                                         [ -z "$_prefix" ] && _prefix=' '
 638                                 fi
 639                         fi
 640                 done
 641                 _tmplist="${_lo}${_tmplist}"
 642                 ;;
 643         *)
 644                 _tmplist="${network_interfaces} ${cloned_interfaces}"
 645                 ;;
 646         esac
 647
 648         if [ -z "$type" ]; then
 649                 echo $_tmplist
 650                 return 0
 651         fi
 652
 653         # Separate out dhcp and non-dhcp interfaces
 654         #
 655         _aprefix=
 656         _bprefix=
 657         for _if in ${_tmplist} ; do
 658                 if dhcpif $_if; then
 659                         _dhcplist="${_dhcplist}${_aprefix}${_if}"
 660                         [ -z "$_aprefix" ] && _aprefix=' '
 661                 elif [ -n "`_ifconfig_getargs $_if`" ]; then
 662                         _nodhcplist="${_nodhcplist}${_bprefix}${_if}"
 663                         [ -z "$_bprefix" ] && _bprefix=' '
 664                 fi
 665         done
 666
 667         case "$type" in
 668         nodhcp)
 669                 echo $_nodhcplist
 670                 ;;
 671         dhcp)
 672                 echo $_dhcplist
 673                 ;;
 674         esac
 675         return 0
 676 }
 677
 678 hexdigit()
 679 {
 680         if [ $1 -lt 10 ]; then
 681                 echo $1
 682         else
 683                 case $1 in
 684                 10)     echo a ;;
 685                 11)     echo b ;;
 686                 12)     echo c ;;
 687                 13)     echo d ;;
 688                 14)     echo e ;;
 689                 15)     echo f ;;
 690                 esac
 691         fi
 692 }
 693
 694 hexprint()
 695 {
 696         val=$1
 697         str=''
 698
 699         dig=`hexdigit $((${val} & 15))`
 700         str=${dig}${str}
 701         val=$((${val} >> 4))
 702         while [ ${val} -gt 0 ]; do
 703                 dig=`hexdigit $((${val} & 15))`
 704                 str=${dig}${str}
 705                 val=$((${val} >> 4))
 706         done
 707
 708         echo ${str}
 709 }
 710
 711 # Setup the interfaces for IPv6
 712 network6_interface_setup()
 713 {
 714         interfaces=$*
 715         rtsol_interfaces=''
 716         case ${ipv6_gateway_enable} in
 717         [Yy][Ee][Ss])
 718                 rtsol_available=no
 719                 ;;
 720         *)
 721                 rtsol_available=yes
 722                 ;;
 723         esac
 724         for i in $interfaces; do
 725                 rtsol_interface=yes
 726                 prefix=`get_if_var $i ipv6_prefix_IF`
 727                 if [ -n "${prefix}" ]; then
 728                         rtsol_available=no
 729                         rtsol_interface=no
 730                         laddr=`network6_getladdr $i`
 731                         hostid=`expr "${laddr}" : 'fe80::\(.*\)%\(.*\)'`
 732                         for j in ${prefix}; do
 733                                 address=$j\:${hostid}
 734                                 ifconfig $i inet6 ${address} prefixlen 64 alias
 735
 736                                 case ${ipv6_gateway_enable} in
 737                                 [Yy][Ee][Ss])
 738                                         # subnet-router anycast address
 739                                         # (rfc2373)
 740                                         ifconfig $i inet6 $j:: prefixlen 64 \
 741                                                 alias anycast
 742                                         ;;
 743                                 esac
 744                         done
 745                 fi
 746                 ipv6_ifconfig=`get_if_var $i ipv6_ifconfig_IF`
 747                 if [ -n "${ipv6_ifconfig}" ]; then
 748                         rtsol_available=no
 749                         rtsol_interface=no
 750                         ifconfig $i inet6 ${ipv6_ifconfig} alias
 751                 fi
 752
 753                 if [ ${rtsol_available} = yes -a ${rtsol_interface} = yes ]
 754                 then
 755                         case ${i} in
 756                         lo0|gif[0-9]*|stf[0-9]*|faith[0-9]*|lp[0-9]*|sl[0-9]*|tun[0-9]*|pflog[0-9]*|pfsync[0-9]*)
 757                                 ;;
 758                         *)
 759                                 rtsol_interfaces="${rtsol_interfaces} ${i}"
 760                                 ;;
 761                         esac
 762                 else
 763                         ifconfig $i inet6
 764                 fi
 765         done
 766
 767         if [ ${rtsol_available} = yes -a -n "${rtsol_interfaces}" ]; then
 768                 # Act as endhost - automatically configured.
 769                 # You can configure only single interface, as
 770                 # specification assumes that autoconfigured host has
 771                 # single interface only.
 772                 sysctl net.inet6.ip6.accept_rtadv=1
 773                 set ${rtsol_interfaces}
 774                 ifconfig $1 up
 775                 rtsol ${rtsol_flags} $1
 776         fi
 777
 778         for i in $interfaces; do
 779                 alias=0
 780                 while : ; do
 781                         ipv6_ifconfig=`get_if_var $i ipv6_ifconfig_IF_alias${alias}`
 782                         if [ -z "${ipv6_ifconfig}" ]; then
 783                                 break;
 784                         fi
 785                         ifconfig $i inet6 ${ipv6_ifconfig} alias
 786                         alias=$((${alias} + 1))
 787                 done
 788         done
 789 }
 790
 791 # Setup IPv6 to IPv4 mapping
 792 network6_stf_setup()
 793 {
 794         case ${stf_interface_ipv4addr} in
 795         [Nn][Oo] | '')
 796                 ;;
 797         *)
 798                 # assign IPv6 addr and interface route for 6to4 interface
 799                 stf_prefixlen=$((16+${stf_interface_ipv4plen:-0}))
 800                 OIFS="$IFS"
 801                 IFS=".$IFS"
 802                 set ${stf_interface_ipv4addr}
 803                 IFS="$OIFS"
 804                 hexfrag1=`hexprint $(($1*256 + $2))`
 805                 hexfrag2=`hexprint $(($3*256 + $4))`
 806                 ipv4_in_hexformat="${hexfrag1}:${hexfrag2}"
 807                 case ${stf_interface_ipv6_ifid} in
 808                 [Aa][Uu][Tt][Oo] | '')
 809                         for i in ${ipv6_network_interfaces}; do
 810                                 laddr=`network6_getladdr ${i}`
 811                                 case ${laddr} in
 812                                 '')
 813                                         ;;
 814                                 *)
 815                                         break
 816                                         ;;
 817                                 esac
 818                         done
 819                         stf_interface_ipv6_ifid=`expr "${laddr}" : \
 820                                                       'fe80::\(.*\)%\(.*\)'`
 821                         case ${stf_interface_ipv6_ifid} in
 822                         '')
 823                                 stf_interface_ipv6_ifid=0:0:0:1
 824                                 ;;
 825                         esac
 826                         ;;
 827                 esac
 828                 ifconfig stf0 create >/dev/null 2>&1
 829                 ifconfig stf0 inet6 2002:${ipv4_in_hexformat}:${stf_interface_ipv6_slaid:-0}:${stf_interface_ipv6_ifid} \
 830                         prefixlen ${stf_prefixlen}
 831                 # disallow packets to malicious 6to4 prefix
 832                 route add -inet6 2002:e000:: -prefixlen 20 ::1 -reject
 833                 route add -inet6 2002:7f00:: -prefixlen 24 ::1 -reject
 834                 route add -inet6 2002:0000:: -prefixlen 24 ::1 -reject
 835                 route add -inet6 2002:ff00:: -prefixlen 24 ::1 -reject
 836                 ;;
 837         esac
 838 }
 839
 840 # Setup static routes
 841 network6_static_routes_setup()
 842 {
 843         # Set up any static routes.
 844         case ${ipv6_defaultrouter} in
 845         [Nn][Oo] | '')
 846                 ;;
 847         *)
 848                 ipv6_static_routes="default ${ipv6_static_routes}"
 849                 ipv6_route_default="default ${ipv6_defaultrouter}"
 850                 ;;
 851         esac
 852         case ${ipv6_static_routes} in
 853         [Nn][Oo] | '')
 854                 ;;
 855         *)
 856                 for i in ${ipv6_static_routes}; do
 857                         ipv6_route_args=`get_if_var $i ipv6_route_IF`
 858                         route add -inet6 ${ipv6_route_args}
 859                 done
 860                 ;;
 861         esac
 862 }
 863
 864 # Setup faith
 865 network6_faith_setup()
 866 {
 867         case ${ipv6_faith_prefix} in
 868         [Nn][Oo] | '')
 869                 ;;
 870         *)
 871                 sysctl net.inet6.ip6.keepfaith=1
 872                 ifconfig faith0 create >/dev/null 2>&1
 873                 ifconfig faith0 up
 874                 for prefix in ${ipv6_faith_prefix}; do
 875                         prefixlen=`expr "${prefix}" : ".*/\(.*\)"`
 876                         case ${prefixlen} in
 877                         '')
 878                                 prefixlen=96
 879                                 ;;
 880                         *)
 881                                 prefix=`expr "${prefix}" : \
 882                                              "\(.*\)/${prefixlen}"`
 883                                 ;;
 884                         esac
 885                         route add -inet6 ${prefix} -prefixlen ${prefixlen} ::1
 886                         route change -inet6 ${prefix} -prefixlen ${prefixlen} \
 887                                 -ifp faith0
 888                 done
 889                 ;;
 890         esac
 891 }
 892
 893 # Install the "default interface" to kernel, which will be used
 894 # as the default route when there's no router.
 895 network6_default_interface_setup()
 896 {
 897         # Choose IPv6 default interface if it is not clearly specified.
 898         case ${ipv6_default_interface} in
 899         '')
 900                 for i in ${ipv6_network_interfaces}; do
 901                         case $i in
 902                         lo0|faith[0-9]*)
 903                                 continue
 904                                 ;;
 905                         esac
 906                         laddr=`network6_getladdr $i exclude_tentative`
 907                         case ${laddr} in
 908                         '')
 909                                 ;;
 910                         *)
 911                                 ipv6_default_interface=$i
 912                                 break
 913                                 ;;
 914                         esac
 915                 done
 916                 ;;
 917         esac
 918
 919         # Disallow unicast packets without outgoing scope identifiers,
 920         # or route such packets to a "default" interface, if it is specified.
 921         route add -inet6 fe80:: -prefixlen 10 ::1 -reject
 922         case ${ipv6_default_interface} in
 923         [Nn][Oo] | '')
 924                 route add -inet6 ff02:: -prefixlen 16 ::1 -reject
 925                 ;;
 926         *)
 927                 laddr=`network6_getladdr ${ipv6_default_interface}`
 928                 route add -inet6 ff02:: ${laddr} -prefixlen 16 -interface \
 929                         -cloning
 930
 931                 # Disable installing the default interface with the
 932                 # case net.inet6.ip6.forwarding=0 and
 933                 # net.inet6.ip6.accept_rtadv=0, due to avoid conflict
 934                 # between the default router list and the manual
 935                 # configured default route.
 936                 case ${ipv6_gateway_enable} in
 937                 [Yy][Ee][Ss])
 938                         ;;
 939                 *)
 940                         if [ `sysctl -n net.inet6.ip6.accept_rtadv` -eq 1 ]
 941                         then
 942                                 ndp -I ${ipv6_default_interface}
 943                         fi
 944                         ;;
 945                 esac
 946                 ;;
 947         esac
 948 }
 949
 950 network6_getladdr()
 951 {
 952         ifconfig $1 2>/dev/null | while read proto addr rest; do
 953                 case ${proto} in
 954                 inet6)
 955                         case ${addr} in
 956                         fe80::*)
 957                                 if [ -z "$2" ]; then
 958                                         echo ${addr}
 959                                         return
 960                                 fi
 961                                 case ${rest} in
 962                                 *tentative*)
 963                                         continue
 964                                         ;;
 965                                 *)
 966                                         echo ${addr}
 967                                         return
 968                                 esac
 969                         esac
 970                 esac
 971         done
 972 }