3 # Configure routing and miscellaneous network tunables
9 # REQUIRE: netif ppp stf
17 start_cmd="routing_start doall"
18 stop_cmd="routing_stop"
19 extra_commands="options static"
20 static_cmd="routing_start static"
21 options_cmd="routing_start options"
23 ROUTE_CMD="/sbin/route"
27 local _cmd _af _if _a _ret
34 ""|[Aa][Ll][Ll]|[Aa][Nn][Yy]) _if="" ;;
38 ""|[Aa][Ll][Ll]|[Aa][Nn][Yy])
39 for _a in inet inet6 atm; do
40 afexists $_a || continue
41 setroutes $_cmd $_a $_if || _ret=1
45 if afexists $_af; then
46 setroutes $_cmd $_af $_if || _ret=1
48 err 1 "Unsupported address family: $_af."
63 ""|[Aa][Ll][Ll]|[Aa][Nn][Yy]) _if="" ;;
67 ""|[Aa][Ll][Ll]|[Aa][Nn][Yy])
68 for _a in inet inet6 atm; do
69 afexists $_a || continue
70 eval static_${_a} delete $_if
71 # When $_if is specified, do not flush routes.
72 if ! [ -n "$_if" ]; then
73 eval routing_stop_${_a}
78 if afexists $_af; then
79 eval static_${_af} delete $_if
80 # When $_if is specified, do not flush routes.
81 if ! [ -n "$_if" ]; then
82 eval routing_stop_${_af}
85 err 1 "Unsupported address family: $_af."
114 ${ROUTE_CMD} -n flush -inet
121 ${ROUTE_CMD} -n flush -inet6
122 for i in `list_net_interfaces`; do
124 ifconfig $i inet6 -defaultif
138 _fibs=$((`${SYSCTL_N} net.fibs` - 1))
139 if [ ${_fibs} -gt 0 ]; then
140 echo "-fib 0-${_fibs}"
148 local _action _if _skip _fibmod
154 # Provide loopback route in all routing tables. This has to come
155 # first so that any following routes can be added.
156 static_routes="_loopback ${static_routes}"
157 route__loopback="-inet 127.0.0.1 -iface lo0 ${_fibmod}"
160 case ${defaultrouter} in
164 static_routes="${static_routes} _default"
165 route__default="default ${defaultrouter}"
169 # Install configured routes.
170 if [ -n "${static_routes}" ]; then
171 for i in ${static_routes}; do
173 if [ -n "$_if" ]; then
179 if [ $_skip = 0 ]; then
180 route_args=`get_if_var ${i%:*} route_IF`
181 if [ -n "$route_args" ]; then
182 ${ROUTE_CMD} ${_action} ${route_args}
184 warn "route_${i%:*} not found."
193 local _action _if _skip fibmod allfibs
199 # Add pre-defined static routes first.
200 ipv6_static_routes="_v4mapped _v4compat ${ipv6_static_routes}"
201 ipv6_static_routes="_lla _llma ${ipv6_static_routes}"
202 ipv6_static_routes="_loopback ${ipv6_static_routes}"
204 # disallow "internal" addresses to appear on the wire
205 ipv6_route__v4mapped="::ffff:0.0.0.0 -prefixlen 96 ::1 -reject ${fibmod}"
206 ipv6_route__v4compat="::0.0.0.0 -prefixlen 96 ::1 -reject ${fibmod}"
208 # Create a loopback route in every fib
209 ipv6_route__loopback="::1 -prefixlen 128 -iface lo0 ${fibmod}"
211 # Disallow link-local unicast packets without outgoing scope
212 # identifiers. However, if you set "ipv6_default_interface",
213 # for the host case, you will allow to omit the identifiers.
214 # Under this configuration, the packets will go to the default
216 ipv6_route__lla="fe80:: -prefixlen 10 ::1 -reject ${fibmod}"
217 ipv6_route__llma="ff02:: -prefixlen 16 ::1 -reject ${fibmod}"
220 case ${ipv6_defaultrouter} in
224 ipv6_static_routes="${ipv6_static_routes} _default"
225 ipv6_route__default="default ${ipv6_defaultrouter}"
229 # Install configured routes.
230 if [ -n "${ipv6_static_routes}" ]; then
231 for i in ${ipv6_static_routes}; do
233 if [ -n "$_if" ]; then
239 if [ $_skip = 0 ]; then
240 ipv6_route_args=`get_if_var ${i%:*} ipv6_route_IF`
241 if [ -n "$ipv6_route_args" ]; then
242 ${ROUTE_CMD} ${_action} \
243 -inet6 ${ipv6_route_args}
245 warn "route_${i%:*} not found"
251 # Install the "default interface" to kernel, which will be used
252 # as the default route when there's no router.
254 # Disable installing the default interface when we act
255 # as router to avoid conflict between the default
256 # router list and the manual configured default route.
257 if checkyesno ipv6_gateway_enable; then
261 case "${ipv6_default_interface}" in
262 [Nn][Oo] | [Nn][Oo][Nn][Ee])
265 [Aa][Uu][Tt][Oo] | "")
266 for i in ${ipv6_network_interfaces}; do
275 laddr=`network6_getladdr $i exclude_tentative`
280 ipv6_default_interface=$i
288 ifconfig ${ipv6_default_interface} inet6 defaultif
289 sysctl net.inet6.ip6.use_defaultzone=1
294 local _action i route_args
297 if [ -n "${natm_static_routes}" ]; then
298 for i in ${natm_static_routes}; do
299 route_args=`get_if_var $i route_IF`
300 if [ -n "$route_args" ]; then
301 atmconfig natm ${_action} ${route_args}
303 warn "route_${i} not found."
311 if [ -z "${_ropts_initdone}" ]; then
312 echo -n "Additional $1 routing options:"
320 if checkyesno icmp_bmcastecho; then
322 echo -n ' broadcast ping responses=YES'
323 ${SYSCTL} net.inet.icmp.bmcastecho=1 > /dev/null
325 ${SYSCTL} net.inet.icmp.bmcastecho=0 > /dev/null
328 if checkyesno icmp_drop_redirect; then
330 echo -n ' ignore ICMP redirect=YES'
331 ${SYSCTL} net.inet.icmp.drop_redirect=1 > /dev/null
333 ${SYSCTL} net.inet.icmp.drop_redirect=0 > /dev/null
336 if checkyesno icmp_log_redirect; then
338 echo -n ' log ICMP redirect=YES'
339 ${SYSCTL} net.inet.icmp.log_redirect=1 > /dev/null
341 ${SYSCTL} net.inet.icmp.log_redirect=0 > /dev/null
344 if checkyesno gateway_enable; then
346 echo -n ' gateway=YES'
347 ${SYSCTL} net.inet.ip.forwarding=1 > /dev/null
349 ${SYSCTL} net.inet.ip.forwarding=0 > /dev/null
352 if checkyesno forward_sourceroute; then
354 echo -n ' do source routing=YES'
355 ${SYSCTL} net.inet.ip.sourceroute=1 > /dev/null
357 ${SYSCTL} net.inet.ip.sourceroute=0 > /dev/null
360 if checkyesno accept_sourceroute; then
362 echo -n ' accept source routing=YES'
363 ${SYSCTL} net.inet.ip.accept_sourceroute=1 > /dev/null
365 ${SYSCTL} net.inet.ip.accept_sourceroute=0 > /dev/null
368 if checkyesno arpproxy_all; then
370 echo -n ' ARP proxyall=YES'
371 ${SYSCTL} net.link.ether.inet.proxyall=1 > /dev/null
373 ${SYSCTL} net.link.ether.inet.proxyall=0 > /dev/null
376 [ -n "${_ropts_initdone}" ] && echo '.'
383 if checkyesno ipv6_gateway_enable; then
385 echo -n ' gateway=YES'
386 ${SYSCTL} net.inet6.ip6.forwarding=1 > /dev/null
388 ${SYSCTL} net.inet6.ip6.forwarding=0 > /dev/null
391 [ -n "${_ropts_initdone}" ] && echo '.'
398 [ -n "${_ropts_initdone}" ] && echo '.'