1 # $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $
4 # Copyright (c) 1997-2004 The NetBSD Foundation, Inc.
7 # This code is derived from software contributed to The NetBSD Foundation
10 # Redistribution and use in source and binary forms, with or without
11 # modification, are permitted provided that the following conditions
13 # 1. Redistributions of source code must retain the above copyright
14 # notice, this list of conditions and the following disclaimer.
15 # 2. Redistributions in binary form must reproduce the above copyright
16 # notice, this list of conditions and the following disclaimer in the
17 # documentation and/or other materials provided with the distribution.
18 # 3. All advertising materials mentioning features or use of this software
19 # must display the following acknowledgement:
20 # This product includes software developed by the NetBSD
21 # Foundation, Inc. and its contributors.
22 # 4. Neither the name of The NetBSD Foundation nor the names of its
23 # contributors may be used to endorse or promote products derived
24 # from this software without specific prior written permission.
26 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 # POSSIBILITY OF SUCH DAMAGE.
39 # functions used by various rc scripts
42 : ${rcvar_manpage:='rc.conf(5)'}
43 : ${RC_PID:=$$}; export RC_PID
46 # Operating System dependent/independent variables
49 if [ -z "${_rc_subr_loaded}" ]; then
54 SYSCTL_N="${SYSCTL} -n"
55 CMD_OSTYPE="${SYSCTL_N} kern.ostype"
56 OSTYPE=`${CMD_OSTYPE}`
58 IDCMD="if [ -x $ID ]; then $ID -un; fi"
60 JID=`$PS -p $$ -o jid=`
67 SYSCTL_W="${SYSCTL} -w"
77 # Set the variable name enabling a specific service.
78 # FreeBSD uses ${service}_enable, while NetBSD uses
79 # just the name of the service. For example:
80 # FreeBSD: sendmail_enable="YES"
81 # NetBSD : sendmail="YES"
82 # $1 - if $name is not the base to work of off, specify
95 echo ${base_var}_enable
107 # force_depend script
108 # Force a service to start. Intended for use by services
109 # to resolve dependency issues. It is assumed the caller
110 # has check to make sure this call is necessary
111 # $1 - filename of script, in /etc/rc.d, to run
117 info "${name} depends on ${_depend}, which will be forced to start."
118 if ! /etc/rc.d/${_depend} forcestart; then
119 warn "Unable to force ${_depend}. It may already be running."
127 # Test $1 variable, and warn if not set to YES or NO.
128 # Return 0 if it's "yes" (et al), nonzero otherwise.
133 debug "checkyesno: $1 is set to $_value."
136 # "yes", "true", "on", or "1"
137 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
141 # "no", "false", "off", or "0"
142 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
146 warn "\$${1} is not set properly - see ${rcvar_manpage}."
154 # print the list in reverse order
160 _revlist="$_revfile $_revlist"
166 # If booting directly to multiuser or $always is enabled,
167 # send SIGTERM to the parent (/etc/rc) to abort the boot.
168 # Otherwise just exit.
174 if [ -n "$1" ] && checkyesno $1; then
179 if [ "$autoboot" = yes -o "$always" = true ]; then
180 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!"
187 # mount_critical_filesystems type
188 # Go through the list of critical filesystems as provided in
189 # the rc.conf(5) variable $critical_filesystems_${type}, checking
190 # each one to see if it is mounted, and if it is not, mounting it.
192 mount_critical_filesystems()
194 eval _fslist=\$critical_filesystems_${1}
195 for _fs in $_fslist; do
198 while read what _on on _type type; do
199 if [ $on = $_fs ]; then
206 mount $_fs >/dev/null 2>&1
213 # check_pidfile pidfile procname [interpreter]
214 # Parses the first line of pidfile for a PID, and ensures
215 # that the process is running and matches procname.
216 # Prints the matching PID upon success, nothing otherwise.
217 # interpreter is optional; see _find_processes() for details.
224 if [ -z "$_pidfile" -o -z "$_procname" ]; then
225 err 3 'USAGE: check_pidfile pidfile procname [interpreter]'
227 if [ ! -f $_pidfile ]; then
228 debug "pid file ($_pidfile): not readable."
231 read _pid _junk < $_pidfile
232 if [ -z "$_pid" ]; then
233 debug "pid file ($_pidfile): no pid in file."
236 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid"
240 # check_process procname [interpreter]
241 # Ensures that a process (or processes) named procname is running.
242 # Prints a list of matching PIDs.
243 # interpreter is optional; see _find_processes() for details.
249 if [ -z "$_procname" ]; then
250 err 3 'USAGE: check_process procname [interpreter]'
252 _find_processes $_procname ${_interpreter:-.} '-ax'
256 # _find_processes procname interpreter psargs
257 # Search for procname in the output of ps generated by psargs.
258 # Prints the PIDs of any matching processes, space separated.
260 # If interpreter == ".", check the following variations of procname
261 # against the first word of each command:
263 # `basename procname`
264 # `basename procname` + ":"
265 # "(" + `basename procname` + ")"
266 # "[" + `basename procname` + "]"
268 # If interpreter != ".", read the first line of procname, remove the
269 # leading #!, normalise whitespace, append procname, and attempt to
270 # match that against each command, either as is, or with extra words
271 # at the end. As an alternative, to deal with interpreted daemons
272 # using perl, the basename of the interpreter plus a colon is also
273 # tried as the prefix to procname.
277 if [ $# -ne 3 ]; then
278 err 3 'USAGE: _find_processes procname interpreter psargs'
285 if [ $_interpreter != "." ]; then # an interpreted script
286 _script=${_chroot}${_chroot:+"/"}$_procname
287 if [ -r $_script ]; then
288 read _interp < $_script # read interpreter name
291 _interp=${_interp#\#!} # strip #!
295 shift # drop env to get real name
298 if [ $_interpreter != $1 ]; then
299 warn "\$command_interpreter $_interpreter != $1"
303 warn "no shebang line in $_script"
308 warn "cannot read shebang line from $_script"
311 _interp="$* $_procname" # cleanup spaces, add _procname
314 _fp_match='case "$_argv" in
315 ${_interp}|"${_interp} "*|"${_interpbn}: ${_procname}"*)'
316 else # a normal daemon
317 _procnamebn=${_procname##*/}
318 _fp_args='_arg0 _argv'
319 _fp_match='case "$_arg0" in
320 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")'
324 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' |
325 while read _npid _jid '"$_fp_args"'; do
327 if [ "$JID" -eq "$_jid" ];
328 then echo -n "$_pref$_npid";
335 # debug "in _find_processes: proccheck is ($_proccheck)."
340 # wait_for_pids pid [pid ...]
341 # spins until none of the pids exist
346 if [ -z "$_list" ]; then
353 if kill -0 $_j 2>/dev/null; then
354 _nlist="${_nlist}${_nlist:+ }$_j"
357 if [ -z "$_nlist" ]; then
361 echo -n ${_prefix:-"Waiting for PIDS: "}$_list
365 if [ -n "$_prefix" ]; then
371 # run_rc_command argument
372 # Search for argument in the list of supported commands, which is:
373 # "start stop restart rcvar status poll ${extra_commands}"
374 # If there's a match, run ${argument}_cmd or the default method
377 # If argument has a given prefix, then change the operation as follows:
380 # fast Skip the pid check, and set rc_fast=yes
381 # force Set ${rcvar} to YES, and set rc_force=yes
382 # one Set ${rcvar} to YES
384 # The following globals are used:
386 # Name Needed Purpose
387 # ---- ------ -------
388 # name y Name of script.
390 # command n Full path to command.
391 # Not needed if ${rc_arg}_cmd is set for
394 # command_args n Optional args/shell directives for command.
396 # command_interpreter n If not empty, command is interpreted, so
397 # call check_{pidfile,process}() appropriately.
399 # extra_commands n List of extra commands supported.
401 # pidfile n If set, use check_pidfile $pidfile $command,
402 # otherwise use check_process $command.
403 # In either case, only check if $command is set.
405 # procname n Process name to check for instead of $command.
407 # rcvar n This is checked with checkyesno to determine
408 # if the action should be run.
410 # ${name}_program n Full path to command.
411 # Meant to be used in /etc/rc.conf to override
414 # ${name}_chroot n Directory to chroot to before running ${command}
415 # Requires /usr to be mounted.
417 # ${name}_chdir n Directory to cd to before running ${command}
418 # (if not using ${name}_chroot).
420 # ${name}_flags n Arguments to call ${command} with.
421 # NOTE: $flags from the parent environment
422 # can be used to override this.
424 # ${name}_nice n Nice level to run ${command} at.
426 # ${name}_user n User to run ${command} as, using su(1) if not
427 # using ${name}_chroot.
428 # Requires /usr to be mounted.
430 # ${name}_group n Group to run chrooted ${command} as.
431 # Requires /usr to be mounted.
433 # ${name}_groups n Comma separated list of supplementary groups
434 # to run the chrooted ${command} with.
435 # Requires /usr to be mounted.
437 # ${rc_arg}_cmd n If set, use this as the method when invoked;
438 # Otherwise, use default command (see below)
440 # ${rc_arg}_precmd n If set, run just before performing the
441 # ${rc_arg}_cmd method in the default
442 # operation (i.e, after checking for required
443 # bits and process (non)existence).
444 # If this completes with a non-zero exit code,
445 # don't run ${rc_arg}_cmd.
447 # ${rc_arg}_postcmd n If set, run just after performing the
448 # ${rc_arg}_cmd method, if that method
449 # returned a zero exit code.
451 # required_dirs n If set, check for the existence of the given
452 # directories before running a (re)start command.
454 # required_files n If set, check for the readability of the given
455 # files before running a (re)start command.
457 # required_modules n If set, ensure the given kernel modules are
458 # loaded before running a (re)start command.
459 # The check and possible loads are actually
460 # done after start_precmd so that the modules
461 # aren't loaded in vain, should the precmd
462 # return a non-zero status to indicate a error.
463 # If a word in the list looks like "foo:bar",
464 # "foo" is the KLD file name and "bar" is the
465 # module name. If a word looks like "foo~bar",
466 # "foo" is the KLD file name and "bar" is a
467 # egrep(1) pattern matching the module name.
468 # Otherwise the module name is assumed to be
469 # the same as the KLD file name, which is most
470 # common. See load_kld().
472 # required_vars n If set, perform checkyesno on each of the
473 # listed variables before running the default
476 # Default behaviour for a given argument, if no override method is
479 # Argument Default behaviour
480 # -------- -----------------
481 # start if !running && checkyesno ${rcvar}
485 # rc_pid=$(check_pidfile $pidfile $command)
487 # rc_pid=$(check_process $command)
488 # kill $sig_stop $rc_pid
489 # wait_for_pids $rc_pid
490 # ($sig_stop defaults to TERM.)
492 # reload Similar to stop, except use $sig_reload instead,
493 # and doesn't wait_for_pids.
494 # $sig_reload defaults to HUP.
495 # Note that `reload' isn't provided by default,
496 # it should be enabled via $extra_commands.
498 # restart Run `stop' then `start'.
500 # status Show if ${command} is running, etc.
502 # poll Wait for ${command} to exit.
504 # rcvar Display what rc.conf variable is used (if any).
506 # Variables available to methods, and after run_rc_command() has
511 # rc_arg Argument to command, after fast/force/one processing
514 # rc_flags Flags to start the default command with.
515 # Defaults to ${name}_flags, unless overridden
516 # by $flags from the environment.
517 # This variable may be changed by the precmd method.
519 # rc_pid PID of command (if appropriate)
521 # rc_fast Not empty if "fast" was provided (q.v.)
523 # rc_force Not empty if "force" was provided (q.v.)
530 if [ -z "$name" ]; then
531 err 3 'run_rc_command: $name is not set.'
534 # Don't repeat the first argument when passing additional command-
535 # line arguments to the command subroutines.
542 fast*) # "fast" prefix; don't check pid
543 rc_arg=${rc_arg#fast}
546 force*) # "force prefix; always run
549 rc_arg=${rc_arg#${_rc_prefix}}
550 if [ -n "${rcvar}" ]; then
554 one*) # "one" prefix; set ${rcvar}=yes
556 rc_arg=${rc_arg#${_rc_prefix}}
557 if [ -n "${rcvar}" ]; then
563 eval _override_command=\$${name}_program
564 command=${command:+${_override_command:-$command}}
566 _keywords="start stop restart rcvar $extra_commands"
569 _procname=${procname:-${command}}
571 # setup pid check command
572 if [ -n "$_procname" ]; then
573 if [ -n "$pidfile" ]; then
574 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')'
576 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')'
578 if [ -n "$_pidcmd" ]; then
579 _keywords="${_keywords} status poll"
583 if [ -z "$rc_arg" ]; then
587 if [ -n "$flags" ]; then # allow override from environment
590 eval rc_flags=\$${name}_flags
592 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \
593 _nice=\$${name}_nice _user=\$${name}_user \
594 _group=\$${name}_group _groups=\$${name}_groups
596 if [ -n "$_user" ]; then # unset $_user if running as that user
597 if [ "$_user" = "$(eval $IDCMD)" ]; then
602 # if ${rcvar} is set, and $1 is not
604 # checkyesno ${rcvar}
605 # and return if that failed
607 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then
608 if ! checkyesno ${rcvar}; then
613 eval $_pidcmd # determine the pid if necessary
615 for _elem in $_keywords; do
616 if [ "$_elem" != "$rc_arg" ]; then
619 # if there's a custom ${XXX_cmd},
620 # run that instead of the default
622 eval _cmd=\$${rc_arg}_cmd \
623 _precmd=\$${rc_arg}_precmd \
624 _postcmd=\$${rc_arg}_postcmd
626 if [ -n "$_cmd" ]; then
627 _run_rc_precmd || return 1
628 _run_rc_doit "$_cmd $rc_extra_args" || return 1
633 case "$rc_arg" in # default operations...
636 _run_rc_precmd || return 1
637 if [ -n "$rc_pid" ]; then
638 echo "${name} is running as pid $rc_pid."
640 echo "${name} is not running."
647 if [ -z "$rc_fast" -a -n "$rc_pid" ]; then
648 echo 1>&2 "${name} already running? (pid=$rc_pid)."
652 if [ ! -x ${_chroot}${_chroot:+"/"}${command} ]; then
653 warn "run_rc_command: cannot run $command"
657 _run_rc_precmd || return 1
659 # setup the full command to run
661 echo "Starting ${name}."
662 if [ -n "$_chroot" ]; then
664 ${_nice:+nice -n $_nice }\
665 chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\
666 $_chroot $command $rc_flags $command_args"
669 ${_chdir:+cd $_chdir && }\
670 $command $rc_flags $command_args"
671 if [ -n "$_user" ]; then
672 _doit="su -m $_user -c 'sh -c \"$_doit\"'"
674 if [ -n "$_nice" ]; then
675 if [ -z "$_user" ]; then
676 _doit="sh -c \"$_doit\""
678 _doit="nice -n $_nice $_doit"
682 # run the full command
684 _run_rc_doit "$_doit" || return 1
686 # finally, run postcmd
692 if [ -z "$rc_pid" ]; then
693 [ -n "$rc_fast" ] && return 0
698 _run_rc_precmd || return 1
700 # send the signal to stop
702 echo "Stopping ${name}."
703 _doit=$(_run_rc_killcmd "${sig_stop:-TERM}")
704 _run_rc_doit "$_doit" || return 1
706 # wait for the command to exit,
708 wait_for_pids $rc_pid
714 if [ -z "$rc_pid" ]; then
719 _run_rc_precmd || return 1
721 _doit=$(_run_rc_killcmd "${sig_reload:-HUP}")
722 _run_rc_doit "$_doit" || return 1
728 # prevent restart being called more
729 # than once by any given script
731 if ${_rc_restart_done:-false}; then
734 _rc_restart_done=true
736 _run_rc_precmd || return 1
738 # run those in a subshell to keep global variables
739 ( run_rc_command ${_rc_prefix}stop $rc_extra_args )
740 ( run_rc_command ${_rc_prefix}start $rc_extra_args )
742 [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1
748 _run_rc_precmd || return 1
749 if [ -n "$rc_pid" ]; then
750 wait_for_pids $rc_pid
757 if [ -n "$rcvar" ]; then
758 if checkyesno ${rcvar}; then
774 echo 1>&2 "$0: unknown directive '$rc_arg'."
780 # Helper functions for run_rc_command: common code.
781 # They use such global variables besides the exported rc_* ones:
791 check_required_before "$rc_arg" || return 1
793 if [ -n "$_precmd" ]; then
794 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args"
795 eval "$_precmd $rc_extra_args"
798 # If precmd failed and force isn't set, request exit.
799 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then
804 check_required_after "$rc_arg" || return 1
811 if [ -n "$_postcmd" ]; then
812 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args"
813 eval "$_postcmd $rc_extra_args"
821 debug "run_rc_command: doit: $*"
825 # If command failed and force isn't set, request exit.
826 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then
837 if [ -n "$pidfile" ]; then
838 _pidmsg=" (check $pidfile)."
842 echo 1>&2 "${name} not running?${_pidmsg}"
849 _cmd="kill -$1 $rc_pid"
850 if [ -n "$_user" ]; then
851 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'"
857 # run_rc_script file arg
858 # Start the script `file' with `arg', and correctly handle the
859 # return value from the script. If `file' ends with `.sh', it's
860 # sourced into the current environment. If `file' appears to be
861 # a backup or scratch file, ignore it. Otherwise if it's
862 # executable run as a child process.
868 if [ -z "$_file" -o -z "$_arg" ]; then
869 err 3 'USAGE: run_rc_script file arg'
872 unset name command command_args command_interpreter \
873 extra_commands pidfile procname \
874 rcvar required_dirs required_files required_vars
875 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd
878 /etc/rc.d/*.sh) # run in current shell
881 *[~#]|*.OLD|*.bak|*.orig|*,v) # scratch file; skip
882 warn "Ignoring scratch file $_file"
885 if [ -x $_file ]; then
886 if [ -n "$rc_fast_and_loose" ]; then
889 ( trap "echo Script $_file interrupted; kill -QUIT $$" 3
890 trap "echo Script $_file interrupted; exit 1" 2
891 set $_arg; . $_file )
899 # load_rc_config name
900 # Source in the configuration file for a given name.
905 if [ -z "$_name" ]; then
906 err 3 'USAGE: load_rc_config name'
909 if ${_rc_conf_loaded:-false}; then
912 if [ -r /etc/defaults/rc.conf ]; then
913 debug "Sourcing /etc/defaults/rc.conf"
914 . /etc/defaults/rc.conf
916 elif [ -r /etc/rc.conf ]; then
917 debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)."
922 if [ -f /etc/rc.conf.d/"$_name" ]; then
923 debug "Sourcing /etc/rc.conf.d/${_name}"
924 . /etc/rc.conf.d/"$_name"
927 # XXX - Deprecated variable name support
931 [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable"
932 [ -n "$portmap_program" ] && rpcbind_program="$portmap_program"
933 [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags"
934 [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable"
935 [ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable"
936 [ -n "$xntpd_program" ] && ntpd_program="$xntpd_program"
937 [ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags"
938 [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program"
939 [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags"
945 # load_rc_config_var name var
946 # Read the rc.conf(5) var for name and set in the
947 # current shell, using load_rc_config in a subshell to prevent
948 # unwanted side effects from other variable assignments.
952 if [ $# -ne 2 ]; then
953 err 3 'USAGE: load_rc_config_var name var'
956 load_rc_config '$1' >/dev/null;
957 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then
958 echo '$2'=\'\''${'$2'}\'\'';
965 # Print a usage string for $0, with `commands' being a list of
970 echo -n 1>&2 "Usage: $0 [fast|force|one]("
974 echo -n 1>&2 "$_sep$_elem"
982 # err exitval message
983 # Display message to stderr and log to the syslog, and exit with exitval.
990 if [ -x /usr/bin/logger ]; then
991 logger "$0: ERROR: $*"
993 echo 1>&2 "$0: ERROR: $*"
999 # Display message to stderr and log to the syslog.
1003 if [ -x /usr/bin/logger ]; then
1004 logger "$0: WARNING: $*"
1006 echo 1>&2 "$0: WARNING: $*"
1011 # Display informational message to stdout and log to syslog.
1016 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1017 if [ -x /usr/bin/logger ]; then
1018 logger "$0: INFO: $*"
1027 # If debugging is enabled in rc.conf output message to stderr.
1028 # BEWARE that you don't call any subroutine that itself calls this
1034 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1035 if [ -x /usr/bin/logger ]; then
1036 logger "$0: DEBUG: $*"
1038 echo 1>&2 "$0: DEBUG: $*"
1044 # backup_file action file cur backup
1045 # Make a backup copy of `file' into `cur', and save the previous
1046 # version of `cur' as `backup' or use rcs for archiving.
1048 # This routine checks the value of the backup_uses_rcs variable,
1049 # which can be either YES or NO.
1051 # The `action' keyword can be one of the following:
1053 # add `file' is now being backed up (and is possibly
1054 # being reentered into the backups system). `cur'
1055 # is created and RCS files, if necessary, are
1058 # update `file' has changed and needs to be backed up.
1059 # If `cur' exists, it is copied to to `back' or
1060 # checked into RCS (if the repository file is old),
1061 # and then `file' is copied to `cur'. Another RCS
1062 # check in done here if RCS is being used.
1064 # remove `file' is no longer being tracked by the backups
1065 # system. If RCS is not being used, `cur' is moved
1066 # to `back', otherwise an empty file is checked in,
1067 # and then `cur' is removed.
1077 if checkyesno backup_uses_rcs; then
1078 _msg0="backup archive"
1081 # ensure that history file is not locked
1082 if [ -f $_cur,v ]; then
1083 rcs -q -u -U -M $_cur
1086 # ensure after switching to rcs that the
1087 # current backup is not lost
1088 if [ -f $_cur ]; then
1089 # no archive, or current newer than archive
1090 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then
1091 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1100 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1103 chown root:wheel $_cur $_cur,v
1107 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1109 chown root:wheel $_cur $_cur,v
1116 if [ -f $_cur ]; then
1120 chown root:wheel $_cur
1129 # make_symlink src link
1130 # Make a symbolic link 'link' to src from basedir. If the
1131 # directory in which link is to be created does not exist
1132 # a warning will be displayed and an error will be returned.
1133 # Returns 0 on sucess, 1 otherwise.
1137 local src link linkdir _me
1140 linkdir="`dirname $link`"
1141 _me="make_symlink()"
1143 if [ -z "$src" -o -z "$link" ]; then
1144 warn "$_me: requires two arguments."
1147 if [ ! -d "$linkdir" ]; then
1148 warn "$_me: the directory $linkdir does not exist."
1151 if ! ln -sf $src $link; then
1152 warn "$_me: unable to make a symbolic link from $link to $src"
1158 # devfs_rulesets_from_file file
1159 # Reads a set of devfs commands from file, and creates
1160 # the specified rulesets with their rules. Returns non-zero
1161 # if there was an error.
1163 devfs_rulesets_from_file()
1167 _me="devfs_rulesets_from_file"
1170 if [ -z "$file" ]; then
1171 warn "$_me: you must specify a file"
1174 if [ ! -e "$file" ]; then
1175 debug "$_me: no such file ($file)"
1178 debug "reading rulesets from file ($file)"
1186 rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"`
1187 if [ -z "$rulenum" ]; then
1188 warn "$_me: cannot extract rule number ($line)"
1192 rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"`
1193 if [ -z "$rulename" ]; then
1194 warn "$_me: cannot extract rule name ($line)"
1198 eval $rulename=\$rulenum
1199 debug "found ruleset: $rulename=$rulenum"
1200 if ! /sbin/devfs rule -s $rulenum delset; then
1206 rulecmd="${line%%"\#*"}"
1207 # evaluate the command incase it includes
1209 if [ -n "$rulecmd" ]; then
1210 debug "adding rule ($rulecmd)"
1211 if ! eval /sbin/devfs rule -s $rulenum $rulecmd
1219 if [ $_err -ne 0 ]; then
1220 debug "error in $_me"
1227 # devfs_init_rulesets
1228 # Initializes rulesets from configuration files. Returns
1229 # non-zero if there was an error.
1231 devfs_init_rulesets()
1234 _me="devfs_init_rulesets"
1236 # Go through this only once
1237 if [ -n "$devfs_rulesets_init" ]; then
1238 debug "$_me: devfs rulesets already initialized"
1241 for file in $devfs_rulesets; do
1242 devfs_rulesets_from_file $file || return 1
1244 devfs_rulesets_init=1
1245 debug "$_me: devfs rulesets initialized"
1249 # devfs_set_ruleset ruleset [dir]
1250 # Sets the default ruleset of dir to ruleset. The ruleset argument
1251 # must be a ruleset name as specified in devfs.rules(5) file.
1252 # Returns non-zero if it could not set it successfully.
1257 [ -n "$1" ] && eval rs=\$$1 || rs=
1258 [ -n "$2" ] && devdir="-m "$2"" || devdir=
1259 _me="devfs_set_ruleset"
1261 if [ -z "$rs" ]; then
1262 warn "$_me: you must specify a ruleset number"
1265 debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })"
1266 if ! /sbin/devfs $devdir ruleset $rs; then
1267 warn "$_me: unable to set ruleset $rs to ${devdir#-m }"
1273 # devfs_apply_ruleset ruleset [dir]
1274 # Apply ruleset number $ruleset to the devfs mountpoint $dir.
1275 # The ruleset argument must be a ruleset name as specified
1276 # in a devfs.rules(5) file. Returns 0 on success or non-zero
1277 # if it could not apply the ruleset.
1279 devfs_apply_ruleset()
1282 [ -n "$1" ] && eval rs=\$$1 || rs=
1283 [ -n "$2" ] && devdir="-m "$2"" || devdir=
1284 _me="devfs_apply_ruleset"
1286 if [ -z "$rs" ]; then
1287 warn "$_me: you must specify a ruleset"
1290 debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })"
1291 if ! /sbin/devfs $devdir rule -s $rs applyset; then
1292 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }"
1298 # devfs_domount dir [ruleset]
1299 # Mount devfs on dir. If ruleset is specified it is set
1300 # on the mount-point. It must also be a ruleset name as specified
1301 # in a devfs.rules(5) file. Returns 0 on success.
1307 [ -n "$2" ] && rs=$2 || rs=
1308 _me="devfs_domount()"
1310 if [ -z "$devdir" ]; then
1311 warn "$_me: you must specify a mount-point"
1314 debug "$_me: mount-point is ($devdir), ruleset is ($rs)"
1315 if ! mount -t devfs dev "$devdir"; then
1316 warn "$_me: Unable to mount devfs on $devdir"
1319 if [ -n "$rs" ]; then
1321 devfs_set_ruleset $rs $devdir
1322 devfs -m $devdir rule applyset
1327 # devfs_mount_jail dir [ruleset]
1328 # Mounts a devfs file system appropriate for jails
1329 # on the directory dir. If ruleset is specified, the ruleset
1330 # it names will be used instead. If present, ruleset must
1331 # be the name of a ruleset as defined in a devfs.rules(5) file.
1332 # This function returns non-zero if an error occurs.
1338 [ -n "$2" ] && rs=$2 || rs="devfsrules_jail"
1339 _me="devfs_mount_jail"
1342 if ! devfs_domount "$jdev" $rs; then
1343 warn "$_me: devfs was not mounted on $jdev"
1349 # Provide a function for normalizing the mounting of memory
1350 # filesystems. This should allow the rest of the code here to remain
1351 # as close as possible between 5-current and 4-stable.
1354 # $3 = (optional) extra mdmfs flags
1357 if [ -n "$3" ]; then
1360 /sbin/mdmfs $flags -s $1 md $2
1363 # Code common to scripts that need to load a kernel module
1364 # if it isn't in the kernel yet. Syntax:
1365 # load_kld [-e regex] [-m module] file
1366 # where -e or -m chooses the way to check if the module
1367 # is already loaded:
1368 # regex is egrep'd in the output from `kldstat -v',
1369 # module is passed to `kldstat -m'.
1370 # The default way is as though `-m file' were specified.
1373 local _loaded _mod _opt _re
1375 while getopts "e:m:" _opt; do
1378 m) _mod="$OPTARG" ;;
1379 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;;
1382 shift $(($OPTIND - 1))
1383 if [ $# -ne 1 ]; then
1384 err 3 'USAGE: load_kld [-e regex] [-m module] file'
1388 if [ -n "$_re" ]; then
1389 if kldstat -v | egrep -q -e "$_re"; then
1393 if kldstat -q -m "$_mod"; then
1398 if ! kldload "$1"; then
1399 warn "Unable to load kernel module $1"
1402 info "$1 kernel module loaded."
1405 debug "load_kld: $1 kernel module already loaded."
1411 # Change every $src in $str to $dst.
1412 # Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor
1416 local _str _src _dst _out _com
1423 for _com in ${_str}; do
1424 if [ -z "${_out}" ]; then
1427 _out="${_out}${_dst}${_com}"
1433 # Creates a list of providers for GELI encryption.
1436 local devices devices2
1437 local provider mountpoint type options rest
1439 # Create list of GELI providers from fstab.
1440 while read provider mountpoint type options rest ; do
1441 case ":${options}" in
1450 case ":${provider}" in
1455 # Skip swap devices.
1456 if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then
1459 devices="${devices} ${provider}"
1464 # Append providers from geli_devices.
1465 devices="${devices} ${geli_devices}"
1467 for provider in ${devices}; do
1468 provider=${provider%.eli}
1469 provider=${provider#/dev/}
1470 devices2="${devices2} ${provider}"
1476 # Find scripts in local_startup directories that use the old syntax
1478 find_local_scripts_old () {
1481 for dir in ${local_startup}; do
1482 if [ -d "${dir}" ]; then
1483 for file in ${dir}/[0-9]*.sh; do
1484 grep '^# PROVIDE:' $file >/dev/null 2>&1 &&
1486 zlist="$zlist $file"
1488 for file in ${dir}/[^0-9]*.sh; do
1489 grep '^# PROVIDE:' $file >/dev/null 2>&1 &&
1491 slist="$slist $file"
1497 find_local_scripts_new () {
1499 for dir in ${local_startup}; do
1500 if [ -d "${dir}" ]; then
1501 for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do
1504 *) if [ -x "$file" ]; then
1505 local_rc="${local_rc} ${file}"
1514 # check_required_{before|after} command
1515 # Check for things required by the command before and after its precmd,
1516 # respectively. The two separate functions are needed because some
1517 # conditions should prevent precmd from being run while other things
1518 # depend on precmd having already been run.
1520 check_required_before()
1526 for _f in $required_vars; do
1527 if ! checkyesno $_f; then
1528 warn "\$${_f} is not enabled."
1529 if [ -z "$rc_force" ]; then
1535 for _f in $required_dirs; do
1536 if [ ! -d "${_f}/." ]; then
1537 warn "${_f} is not a directory."
1538 if [ -z "$rc_force" ]; then
1544 for _f in $required_files; do
1545 if [ ! -r "${_f}" ]; then
1546 warn "${_f} is not readable."
1547 if [ -z "$rc_force" ]; then
1558 check_required_after()
1564 for _f in $required_modules; do
1566 *~*) _args="-e ${_f#*~} ${_f%%~*}" ;;
1567 *:*) _args="-m ${_f#*:} ${_f%%:*}" ;;
1570 if ! load_kld ${_args}; then
1571 if [ -z "$rc_force" ]; then