2 * Copyright (c) 1989, 1993
3 * The Regents of the University of California. All rights reserved.
5 * This code is derived from software contributed to Berkeley by
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by the University of
19 * California, Berkeley and its contributors.
20 * 4. Neither the name of the University nor the names of its contributors
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 static const char copyright[] =
39 "@(#) Copyright (c) 1989, 1993\n\
40 The Regents of the University of California. All rights reserved.\n";
45 static char sccsid[] = "@(#)primes.c 8.5 (Berkeley) 5/10/95";
47 static const char rcsid[] =
52 * primes - generate a table of primes between two values
54 * By: Landon Curt Noll chongo@toad.com, ...!{sun,tolsoft}!hoptoad!chongo
56 * chongo <for a good prime call: 391581 * 2^216193 - 1> /\oo/\
59 * primes [-h] [start [stop]]
61 * Print primes >= start and < stop. If stop is omitted,
62 * the value 4294967295 (2^32-1) is assumed. If start is
63 * omitted, start is read from standard input.
65 * validation check: there are 664579 primes between 0 and 10^7
81 * Eratosthenes sieve table
83 * We only sieve the odd numbers. The base of our sieve windows are always
84 * odd. If the base of table is 1, table[i] represents 2*i-1. After the
85 * sieve, table[i] == 1 if and only if 2*i-1 is prime.
87 * We make TABSIZE large to reduce the overhead of inner loop setup.
89 static char table[TABSIZE]; /* Eratosthenes sieve of odd numbers */
93 static void primes(ubig, ubig);
94 static ubig read_num_buf(void);
95 static void usage(void);
98 main(int argc, char *argv[])
100 ubig start; /* where to start generating */
101 ubig stop; /* don't generate at or above this value */
105 while ((ch = getopt(argc, argv, "h")) != -1)
121 * Convert low and high args. Strtoul(3) sets errno to
122 * ERANGE if the number is too large, but, if there's
123 * a leading minus sign it returns the negation of the
124 * result of the conversion, which we'd rather disallow.
128 /* Start and stop supplied on the command line. */
129 if (argv[0][0] == '-' || argv[1][0] == '-')
130 errx(1, "negative numbers aren't permitted.");
133 start = strtoul(argv[0], &p, 0);
135 err(1, "%s", argv[0]);
137 errx(1, "%s: illegal numeric format.", argv[0]);
140 stop = strtoul(argv[1], &p, 0);
142 err(1, "%s", argv[1]);
144 errx(1, "%s: illegal numeric format.", argv[1]);
147 /* Start on the command line. */
148 if (argv[0][0] == '-')
149 errx(1, "negative numbers aren't permitted.");
152 start = strtoul(argv[0], &p, 0);
154 err(1, "%s", argv[0]);
156 errx(1, "%s: illegal numeric format.", argv[0]);
159 start = read_num_buf();
166 errx(1, "start value must be less than stop value.");
173 * This routine returns a number n, where 0 <= n && n <= BIG.
179 char *p, buf[LINE_MAX]; /* > max number of digits. */
182 if (fgets(buf, sizeof(buf), stdin) == NULL) {
187 for (p = buf; isblank(*p); ++p);
188 if (*p == '\n' || *p == '\0')
191 errx(1, "negative numbers aren't permitted.");
193 val = strtoul(buf, &p, 0);
197 errx(1, "%s: illegal numeric format.", buf);
203 * primes - sieve and print primes from start up to and but not including stop
206 primes(ubig start, ubig stop)
208 char *q; /* sieve spot */
209 ubig factor; /* index and factor */
210 char *tab_lim; /* the limit to sieve on the table */
211 const ubig *p; /* prime table pointer */
212 ubig fact_lim; /* highest prime for current block */
213 ubig mod; /* temp storage for mod */
216 * A number of systems can not convert double values into unsigned
217 * longs when the values are larger than the largest signed value.
218 * We don't have this problem, so we can go all the way to BIG.
231 * be sure that the values are odd, or 2
233 if (start != 2 && (start&0x1) == 0) {
236 if (stop != 2 && (stop&0x1) == 0) {
241 * quick list of primes <= pr_limit
243 if (start <= *pr_limit) {
244 /* skip primes up to the start value */
245 for (p = &prime[0], factor = prime[0];
246 factor < stop && p <= pr_limit; factor = *(++p)) {
247 if (factor >= start) {
248 printf(hflag ? "0x%lx\n" : "%lu\n", factor);
251 /* return early if we are done */
259 * we shall sieve a bytemap window, note primes and move the window
260 * upward until we pass the stop point
262 while (start < stop) {
264 * factor out 3, 5, 7, 11 and 13
266 /* initial pattern copy */
267 factor = (start%(2*3*5*7*11*13))/2; /* starting copy spot */
268 memcpy(table, &pattern[factor], pattern_size-factor);
269 /* main block pattern copies */
270 for (fact_lim=pattern_size-factor;
271 fact_lim+pattern_size<=TABSIZE; fact_lim+=pattern_size) {
272 memcpy(&table[fact_lim], pattern, pattern_size);
274 /* final block pattern copy */
275 memcpy(&table[fact_lim], pattern, TABSIZE-fact_lim);
278 * sieve for primes 17 and higher
280 /* note highest useful factor and sieve spot */
281 if (stop-start > TABSIZE+TABSIZE) {
282 tab_lim = &table[TABSIZE]; /* sieve it all */
283 fact_lim = sqrt(start+1.0+TABSIZE+TABSIZE);
285 tab_lim = &table[(stop-start)/2]; /* partial sieve */
286 fact_lim = sqrt(stop+1.0);
288 /* sieve for factors >= 17 */
289 factor = 17; /* 17 is first prime to use */
290 p = &prime[7]; /* 19 is next prime, pi(19)=7 */
292 /* determine the factor's initial sieve point */
295 q = &table[(factor-mod)/2];
297 q = &table[mod ? factor-(mod/2) : 0];
299 /* sive for our current factor */
300 for ( ; q < tab_lim; q += factor) {
301 *q = '\0'; /* sieve out a spot */
304 } while (factor <= fact_lim);
307 * print generated primes
309 for (q = table; q < tab_lim; ++q, start+=2) {
311 printf(hflag ? "0x%lx\n" : "%lu\n", start);
320 fprintf(stderr, "usage: primes [-h] [start [stop]]\n");