1 /* $NetBSD: job.c,v 1.459 2023/02/15 06:52:58 rillig Exp $ */
4 * Copyright (c) 1988, 1989, 1990 The Regents of the University of California.
7 * This code is derived from software contributed to Berkeley by
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. Neither the name of the University nor the names of its contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * Copyright (c) 1988, 1989 by Adam de Boor
37 * Copyright (c) 1989 by Berkeley Softworks
38 * All rights reserved.
40 * This code is derived from software contributed to Berkeley by
43 * Redistribution and use in source and binary forms, with or without
44 * modification, are permitted provided that the following conditions
46 * 1. Redistributions of source code must retain the above copyright
47 * notice, this list of conditions and the following disclaimer.
48 * 2. Redistributions in binary form must reproduce the above copyright
49 * notice, this list of conditions and the following disclaimer in the
50 * documentation and/or other materials provided with the distribution.
51 * 3. All advertising materials mentioning features or use of this software
52 * must display the following acknowledgement:
53 * This product includes software developed by the University of
54 * California, Berkeley and its contributors.
55 * 4. Neither the name of the University nor the names of its contributors
56 * may be used to endorse or promote products derived from this software
57 * without specific prior written permission.
59 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
60 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
61 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
62 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
63 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
64 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
65 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
66 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
67 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
68 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
74 * handle the creation etc. of our child processes.
77 * Job_Init Called to initialize this module. In addition,
78 * the .BEGIN target is made including all of its
79 * dependencies before this function returns.
80 * Hence, the makefiles must have been parsed
81 * before this function is called.
83 * Job_End Clean up any memory used.
85 * Job_Make Start the creation of the given target.
88 * Check for and handle the termination of any
89 * children. This must be called reasonably
90 * frequently to keep the whole make going at
91 * a decent clip, since job table entries aren't
92 * removed until their process is caught this way.
95 * Print any output our children have produced.
96 * Should also be called fairly frequently to
97 * keep the user informed of what's going on.
98 * If no output is waiting, it will block for
99 * a time given by the SEL_* constants, below,
100 * or until output is ready.
102 * Job_ParseShell Given a special dependency line with target '.SHELL',
103 * define the shell that is used for the creation
104 * commands in jobs mode.
106 * Job_Finish Perform any final processing which needs doing.
107 * This includes the execution of any commands
108 * which have been/were attached to the .END
109 * target. It should only be called when the
110 * job table is empty.
112 * Job_AbortAll Abort all currently running jobs. Do not handle
113 * output or do anything for the jobs, just kill them.
114 * Should only be called in an emergency.
117 * Verify that the commands for a target are
118 * ok. Provide them if necessary and possible.
120 * Job_Touch Update a target without really updating it.
122 * Job_Wait Wait for all currently-running jobs to finish.
128 #include <sys/types.h>
129 #include <sys/stat.h>
130 #include <sys/file.h>
131 #include <sys/time.h>
135 #if !defined(USE_SELECT) && defined(HAVE_POLL_H)
138 #ifndef USE_SELECT /* no poll.h */
141 #if defined(HAVE_SYS_SELECT_H)
142 # include <sys/select.h>
147 #if defined(HAVE_SYS_SOCKET_H)
148 # include <sys/socket.h>
154 #include "pathnames.h"
157 /* "@(#)job.c 8.2 (Berkeley) 3/19/94" */
158 MAKE_RCSID("$NetBSD: job.c,v 1.459 2023/02/15 06:52:58 rillig Exp $");
161 * A shell defines how the commands are run. All commands for a target are
162 * written into a single file, which is then given to the shell to execute
163 * the commands from it. The commands are written to the file using a few
164 * templates for echo control and error control.
166 * The name of the shell is the basename for the predefined shells, such as
167 * "sh", "csh", "bash". For custom shells, it is the full pathname, and its
168 * basename is used to select the type of shell; the longest match wins.
169 * So /usr/pkg/bin/bash has type sh, /usr/local/bin/tcsh has type csh.
171 * The echoing of command lines is controlled using hasEchoCtl, echoOff,
172 * echoOn, noPrint and noPrintLen. When echoOff is executed by the shell, it
173 * still outputs something, but this something is not interesting, therefore
174 * it is filtered out using noPrint and noPrintLen.
176 * The error checking for individual commands is controlled using hasErrCtl,
177 * errOn, errOff and runChkTmpl.
179 * In case a shell doesn't have error control, echoTmpl is a printf template
180 * for echoing the command, should echoing be on; runIgnTmpl is another
181 * printf template for executing the command while ignoring the return
182 * status. Finally runChkTmpl is a printf template for running the command and
183 * causing the shell to exit on error. If any of these strings are empty when
184 * hasErrCtl is false, the command will be executed anyway as is, and if it
185 * causes an error, so be it. Any templates set up to echo the command will
186 * escape any '$ ` \ "' characters in the command string to avoid unwanted
187 * shell code injection, the escaped command is safe to use in double quotes.
189 * The command-line flags "echo" and "exit" also control the behavior. The
190 * "echo" flag causes the shell to start echoing commands right away. The
191 * "exit" flag causes the shell to exit when an error is detected in one of
194 typedef struct Shell {
197 * The name of the shell. For Bourne and C shells, this is used only
198 * to find the shell description when used as the single source of a
199 * .SHELL target. For user-defined shells, this is the full path of
204 bool hasEchoCtl; /* whether both echoOff and echoOn are there */
205 const char *echoOff; /* command to turn echoing off */
206 const char *echoOn; /* command to turn echoing back on */
207 const char *noPrint; /* text to skip when printing output from the
208 * shell. This is usually the same as echoOff */
209 size_t noPrintLen; /* length of noPrint command */
211 bool hasErrCtl; /* whether error checking can be controlled
212 * for individual commands */
213 const char *errOn; /* command to turn on error checking */
214 const char *errOff; /* command to turn off error checking */
216 const char *echoTmpl; /* template to echo a command */
217 const char *runIgnTmpl; /* template to run a command without error
219 const char *runChkTmpl; /* template to run a command with error
223 * A string literal that results in a newline character when it
224 * occurs outside of any 'quote' or "quote" characters.
227 char commentChar; /* character used by shell for comment lines */
229 const char *echoFlag; /* shell flag to echo commands */
230 const char *errFlag; /* shell flag to exit on error */
233 typedef struct CommandFlags {
234 /* Whether to echo the command before or instead of running it. */
237 /* Run the command even in -n or -N mode. */
241 * true if we turned error checking off before writing the command to
242 * the commands file and need to turn it back on
248 * Write shell commands to a file.
250 * TODO: keep track of whether commands are echoed.
251 * TODO: keep track of whether error checking is active.
253 typedef struct ShellWriter {
256 /* we've sent 'set -x' */
262 * error handling variables
264 static int job_errors = 0; /* number of errors reported */
265 static enum { /* Why is the make aborting? */
267 ABORT_ERROR, /* Aborted because of an error */
268 ABORT_INTERRUPT, /* Aborted because it was interrupted */
269 ABORT_WAIT /* Waiting for jobs to finish */
270 } aborting = ABORT_NONE;
271 #define JOB_TOKENS "+EI+" /* Token to requeue for each abort state */
274 * this tracks the number of tokens currently "out" to build jobs.
276 int jobTokensRunning = 0;
278 typedef enum JobStartResult {
279 JOB_RUNNING, /* Job is running */
280 JOB_ERROR, /* Error in starting the job */
281 JOB_FINISHED /* The job is already finished */
285 * Descriptions for various shells.
287 * The build environment may set DEFSHELL_INDEX to one of
288 * DEFSHELL_INDEX_SH, DEFSHELL_INDEX_KSH, or DEFSHELL_INDEX_CSH, to
289 * select one of the predefined shells as the default shell.
291 * Alternatively, the build environment may set DEFSHELL_CUSTOM to the
292 * name or the full path of a sh-compatible shell, which will be used as
295 * ".SHELL" lines in Makefiles can choose the default shell from the
296 * set defined here, or add additional shells.
299 #ifdef DEFSHELL_CUSTOM
300 #define DEFSHELL_INDEX_CUSTOM 0
301 #define DEFSHELL_INDEX_SH 1
302 #define DEFSHELL_INDEX_KSH 2
303 #define DEFSHELL_INDEX_CSH 3
304 #else /* !DEFSHELL_CUSTOM */
305 #define DEFSHELL_INDEX_SH 0
306 #define DEFSHELL_INDEX_KSH 1
307 #define DEFSHELL_INDEX_CSH 2
308 #endif /* !DEFSHELL_CUSTOM */
310 #ifndef DEFSHELL_INDEX
311 #define DEFSHELL_INDEX 0 /* DEFSHELL_INDEX_CUSTOM or DEFSHELL_INDEX_SH */
312 #endif /* !DEFSHELL_INDEX */
314 static Shell shells[] = {
315 #ifdef DEFSHELL_CUSTOM
317 * An sh-compatible shell with a non-standard name.
319 * Keep this in sync with the "sh" description below, but avoid
320 * non-portable features that might not be supplied by all
321 * sh-compatible shells.
324 DEFSHELL_CUSTOM, /* .name */
325 false, /* .hasEchoCtl */
330 false, /* .hasErrCtl */
333 "echo \"%s\"\n", /* .echoTmpl */
334 "%s\n", /* .runIgnTmpl */
335 "{ %s \n} || exit $?\n", /* .runChkTmpl */
336 "'\n'", /* .newline */
337 '#', /* .commentChar */
341 #endif /* DEFSHELL_CUSTOM */
343 * SH description. Echo control is also possible and, under
344 * sun UNIX anyway, one can even control error checking.
348 false, /* .hasEchoCtl */
353 false, /* .hasErrCtl */
356 "echo \"%s\"\n", /* .echoTmpl */
357 "%s\n", /* .runIgnTmpl */
358 "{ %s \n} || exit $?\n", /* .runChkTmpl */
359 "'\n'", /* .newline */
360 '#', /* .commentChar*/
361 #if defined(MAKE_NATIVE) && defined(__NetBSD__)
362 /* XXX: -q is not really echoFlag, it's more like noEchoInSysFlag. */
374 true, /* .hasEchoCtl */
375 "set +v", /* .echoOff */
376 "set -v", /* .echoOn */
377 "set +v", /* .noPrint */
379 false, /* .hasErrCtl */
382 "echo \"%s\"\n", /* .echoTmpl */
383 "%s\n", /* .runIgnTmpl */
384 "{ %s \n} || exit $?\n", /* .runChkTmpl */
385 "'\n'", /* .newline */
386 '#', /* .commentChar */
391 * CSH description. The csh can do echo control by playing
392 * with the setting of the 'echo' shell variable. Sadly,
393 * however, it is unable to do error control nicely.
397 true, /* .hasEchoCtl */
398 "unset verbose", /* .echoOff */
399 "set verbose", /* .echoOn */
400 "unset verbose", /* .noPrint */
401 13, /* .noPrintLen */
402 false, /* .hasErrCtl */
405 "echo \"%s\"\n", /* .echoTmpl */
406 "csh -c \"%s || exit 0\"\n", /* .runIgnTmpl */
407 "", /* .runChkTmpl */
408 "'\\\n'", /* .newline */
409 '#', /* .commentChar */
416 * This is the shell to which we pass all commands in the Makefile.
417 * It is set by the Job_ParseShell function.
419 static Shell *shell = &shells[DEFSHELL_INDEX];
420 const char *shellPath = NULL; /* full pathname of executable image */
421 const char *shellName = NULL; /* last component of shellPath */
422 char *shellErrFlag = NULL;
423 static char *shell_freeIt = NULL; /* Allocated memory for custom .SHELL */
426 static Job *job_table; /* The structures that describe them */
427 static Job *job_table_end; /* job_table + maxJobs */
428 static unsigned int wantToken; /* we want a token */
429 static bool lurking_children = false;
430 static bool make_suspended = false; /* Whether we've seen a SIGTSTP (etc) */
433 * Set of descriptors of pipes connected to
434 * the output channels of children
436 static struct pollfd *fds = NULL;
437 static Job **jobByFdIndex = NULL;
438 static nfds_t fdsLen = 0;
439 static void watchfd(Job *);
440 static void clearfd(Job *);
441 static bool readyfd(Job *);
443 static char *targPrefix = NULL; /* To identify a job change in the output. */
444 static Job tokenWaitJob; /* token wait pseudo-job */
446 static Job childExitJob; /* child exit pseudo-job */
447 #define CHILD_EXIT "."
448 #define DO_JOB_RESUME "R"
451 npseudojobs = 2 /* number of pseudo-jobs */
454 static sigset_t caught_signals; /* Set of signals we handle */
455 static volatile sig_atomic_t caught_sigchld;
457 static void CollectOutput(Job *, bool);
458 static void JobInterrupt(bool, int) MAKE_ATTR_DEAD;
459 static void JobRestartJobs(void);
460 static void JobSigReset(void);
463 SwitchOutputTo(GNode *gn)
465 /* The node for which output was most recently produced. */
466 static GNode *lastNode = NULL;
472 if (opts.maxJobs != 1 && targPrefix != NULL && targPrefix[0] != '\0')
473 (void)fprintf(stdout, "%s %s ---\n", targPrefix, gn->name);
479 #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV)
487 Job_FlagsToString(const Job *job, char *buf, size_t bufsize)
489 snprintf(buf, bufsize, "%c%c%c",
490 job->ignerr ? 'i' : '-',
491 !job->echo ? 's' : '-',
492 job->special ? 'S' : '-');
496 DumpJobs(const char *where)
501 debug_printf("job table @ %s\n", where);
502 for (job = job_table; job < job_table_end; job++) {
503 Job_FlagsToString(job, flags, sizeof flags);
504 debug_printf("job %d, status %d, flags %s, pid %d\n",
505 (int)(job - job_table), job->status, flags, job->pid);
510 * Delete the target of a failed, interrupted, or otherwise
511 * unsuccessful job unless inhibited by .PRECIOUS.
514 JobDeleteTarget(GNode *gn)
518 if (gn->type & OP_JOIN)
520 if (gn->type & OP_PHONY)
522 if (GNode_IsPrecious(gn))
527 file = GNode_Path(gn);
528 if (unlink_file(file) == 0)
529 Error("*** %s removed", file);
533 * JobSigLock/JobSigUnlock
535 * Signal lock routines to get exclusive access. Currently used to
536 * protect `jobs' and `stoppedJobs' list manipulations.
539 JobSigLock(sigset_t *omaskp)
541 if (sigprocmask(SIG_BLOCK, &caught_signals, omaskp) != 0) {
542 Punt("JobSigLock: sigprocmask: %s", strerror(errno));
548 JobSigUnlock(sigset_t *omaskp)
550 (void)sigprocmask(SIG_SETMASK, omaskp, NULL);
554 JobCreatePipe(Job *job, int minfd)
559 if (pipe(pipe_fds) == -1)
560 Punt("Cannot create pipe: %s", strerror(errno));
562 for (i = 0; i < 2; i++) {
563 /* Avoid using low numbered fds */
564 fd = fcntl(pipe_fds[i], F_DUPFD, minfd);
571 job->inPipe = pipe_fds[0];
572 job->outPipe = pipe_fds[1];
574 /* Set close-on-exec flag for both */
575 if (fcntl(job->inPipe, F_SETFD, FD_CLOEXEC) == -1)
576 Punt("Cannot set close-on-exec: %s", strerror(errno));
577 if (fcntl(job->outPipe, F_SETFD, FD_CLOEXEC) == -1)
578 Punt("Cannot set close-on-exec: %s", strerror(errno));
581 * We mark the input side of the pipe non-blocking; we poll(2) the
582 * pipe when we're waiting for a job token, but we might lose the
583 * race for the token when a new one becomes available, so the read
584 * from the pipe should not block.
586 flags = fcntl(job->inPipe, F_GETFL, 0);
588 Punt("Cannot get flags: %s", strerror(errno));
590 if (fcntl(job->inPipe, F_SETFL, flags) == -1)
591 Punt("Cannot set flags: %s", strerror(errno));
594 /* Pass the signal to each running job. */
596 JobCondPassSig(int signo)
600 DEBUG1(JOB, "JobCondPassSig(%d) called.\n", signo);
602 for (job = job_table; job < job_table_end; job++) {
603 if (job->status != JOB_ST_RUNNING)
605 DEBUG2(JOB, "JobCondPassSig passing signal %d to child %d.\n",
607 KILLPG(job->pid, signo);
614 * Sends a token on the child exit pipe to wake us up from select()/poll().
618 JobChildSig(int signo MAKE_ATTR_UNUSED)
621 while (write(childExitJob.outPipe, CHILD_EXIT, 1) == -1 &&
627 /* Resume all stopped jobs. */
630 JobContinueSig(int signo MAKE_ATTR_UNUSED)
633 * Defer sending SIGCONT to our stopped children until we return
634 * from the signal handler.
636 while (write(childExitJob.outPipe, DO_JOB_RESUME, 1) == -1 &&
642 * Pass a signal on to all jobs, then resend to ourselves.
643 * We die by the same signal.
645 MAKE_ATTR_DEAD static void
646 JobPassSig_int(int signo)
648 /* Run .INTERRUPT target then exit */
649 JobInterrupt(true, signo);
653 * Pass a signal on to all jobs, then resend to ourselves.
654 * We die by the same signal.
656 MAKE_ATTR_DEAD static void
657 JobPassSig_term(int signo)
659 /* Dont run .INTERRUPT target then exit */
660 JobInterrupt(false, signo);
664 JobPassSig_suspend(int signo)
666 sigset_t nmask, omask;
667 struct sigaction act;
669 /* Suppress job started/continued messages */
670 make_suspended = true;
672 /* Pass the signal onto every job */
673 JobCondPassSig(signo);
676 * Send ourselves the signal now we've given the message to everyone
677 * else. Note we block everything else possible while we're getting
678 * the signal. This ensures that all our jobs get continued when we
679 * wake up before we take any other signal.
682 sigdelset(&nmask, signo);
683 (void)sigprocmask(SIG_SETMASK, &nmask, &omask);
685 act.sa_handler = SIG_DFL;
686 sigemptyset(&act.sa_mask);
688 (void)sigaction(signo, &act, NULL);
690 DEBUG1(JOB, "JobPassSig passing signal %d to self.\n", signo);
692 (void)kill(getpid(), signo);
695 * We've been continued.
697 * A whole host of signals continue to happen!
698 * SIGCHLD for any processes that actually suspended themselves.
699 * SIGCHLD for any processes that exited while we were alseep.
700 * The SIGCONT that actually caused us to wakeup.
702 * Since we defer passing the SIGCONT on to our children until
703 * the main processing loop, we can be sure that all the SIGCHLD
704 * events will have happened by then - and that the waitpid() will
705 * collect the child 'suspended' events.
706 * For correct sequencing we just need to ensure we process the
707 * waitpid() before passing on the SIGCONT.
709 * In any case nothing else is needed here.
712 /* Restore handler and signal mask */
713 act.sa_handler = JobPassSig_suspend;
714 (void)sigaction(signo, &act, NULL);
715 (void)sigprocmask(SIG_SETMASK, &omask, NULL);
719 JobFindPid(int pid, JobStatus status, bool isJobs)
723 for (job = job_table; job < job_table_end; job++) {
724 if (job->status == status && job->pid == pid)
727 if (DEBUG(JOB) && isJobs)
732 /* Parse leading '@', '-' and '+', which control the exact execution mode. */
734 ParseCommandFlags(char **pp, CommandFlags *out_cmdFlags)
737 out_cmdFlags->echo = true;
738 out_cmdFlags->ignerr = false;
739 out_cmdFlags->always = false;
743 out_cmdFlags->echo = DEBUG(LOUD);
745 out_cmdFlags->ignerr = true;
747 out_cmdFlags->always = true;
748 else if (!ch_isspace(*p))
749 /* Ignore whitespace for compatibility with gnu make */
754 pp_skip_whitespace(&p);
759 /* Escape a string for a double-quoted string literal in sh, csh and ksh. */
761 EscapeShellDblQuot(const char *cmd)
765 /* Worst that could happen is every char needs escaping. */
766 char *esc = bmake_malloc(strlen(cmd) * 2 + 1);
767 for (i = 0, j = 0; cmd[i] != '\0'; i++, j++) {
768 if (cmd[i] == '$' || cmd[i] == '`' || cmd[i] == '\\' ||
779 ShellWriter_WriteFmt(ShellWriter *wr, const char *fmt, const char *arg)
781 DEBUG1(JOB, fmt, arg);
783 (void)fprintf(wr->f, fmt, arg);
789 ShellWriter_WriteLine(ShellWriter *wr, const char *line)
791 ShellWriter_WriteFmt(wr, "%s\n", line);
795 ShellWriter_EchoOff(ShellWriter *wr)
797 if (shell->hasEchoCtl)
798 ShellWriter_WriteLine(wr, shell->echoOff);
802 ShellWriter_EchoCmd(ShellWriter *wr, const char *escCmd)
804 ShellWriter_WriteFmt(wr, shell->echoTmpl, escCmd);
808 ShellWriter_EchoOn(ShellWriter *wr)
810 if (shell->hasEchoCtl)
811 ShellWriter_WriteLine(wr, shell->echoOn);
815 ShellWriter_TraceOn(ShellWriter *wr)
818 ShellWriter_WriteLine(wr, "set -x");
824 ShellWriter_ErrOff(ShellWriter *wr, bool echo)
827 ShellWriter_EchoOff(wr);
828 ShellWriter_WriteLine(wr, shell->errOff);
830 ShellWriter_EchoOn(wr);
834 ShellWriter_ErrOn(ShellWriter *wr, bool echo)
837 ShellWriter_EchoOff(wr);
838 ShellWriter_WriteLine(wr, shell->errOn);
840 ShellWriter_EchoOn(wr);
844 * The shell has no built-in error control, so emulate error control by
845 * enclosing each shell command in a template like "{ %s \n } || exit $?"
846 * (configurable per shell).
849 JobWriteSpecialsEchoCtl(Job *job, ShellWriter *wr, CommandFlags *inout_cmdFlags,
850 const char *escCmd, const char **inout_cmdTemplate)
852 /* XXX: Why is the whole job modified at this point? */
855 if (job->echo && inout_cmdFlags->echo) {
856 ShellWriter_EchoOff(wr);
857 ShellWriter_EchoCmd(wr, escCmd);
860 * Leave echoing off so the user doesn't see the commands
861 * for toggling the error checking.
863 inout_cmdFlags->echo = false;
865 *inout_cmdTemplate = shell->runIgnTmpl;
868 * The template runIgnTmpl already takes care of ignoring errors,
869 * so pretend error checking is still on.
870 * XXX: What effects does this have, and why is it necessary?
872 inout_cmdFlags->ignerr = false;
876 JobWriteSpecials(Job *job, ShellWriter *wr, const char *escCmd, bool run,
877 CommandFlags *inout_cmdFlags, const char **inout_cmdTemplate)
881 * If there is no command to run, there is no need to switch
882 * error checking off and on again for nothing.
884 inout_cmdFlags->ignerr = false;
885 } else if (shell->hasErrCtl)
886 ShellWriter_ErrOff(wr, job->echo && inout_cmdFlags->echo);
887 else if (shell->runIgnTmpl != NULL && shell->runIgnTmpl[0] != '\0') {
888 JobWriteSpecialsEchoCtl(job, wr, inout_cmdFlags, escCmd,
891 inout_cmdFlags->ignerr = false;
895 * Write a shell command to the job's commands file, to be run later.
897 * If the command starts with '@' and neither the -s nor the -n flag was
898 * given to make, stick a shell-specific echoOff command in the script.
900 * If the command starts with '-' and the shell has no error control (none
901 * of the predefined shells has that), ignore errors for the entire job.
903 * XXX: Why ignore errors for the entire job? This is even documented in the
904 * manual page, but without any rationale since there is no known rationale.
906 * XXX: The manual page says the '-' "affects the entire job", but that's not
907 * accurate. The '-' does not affect the commands before the '-'.
909 * If the command is just "...", skip all further commands of this job. These
910 * commands are attached to the .END node instead and will be run by
911 * Job_Finish after all other targets have been made.
914 JobWriteCommand(Job *job, ShellWriter *wr, StringListNode *ln, const char *ucmd)
918 CommandFlags cmdFlags;
919 /* Template for writing a command to the shell file */
920 const char *cmdTemplate;
921 char *xcmd; /* The expanded command */
923 char *escCmd; /* xcmd escaped to be used in double quotes */
925 run = GNode_ShouldExecute(job->node);
927 xcmd = Var_Subst(ucmd, job->node, VARE_WANTRES);
928 /* TODO: handle errors */
931 cmdTemplate = "%s\n";
933 ParseCommandFlags(&xcmd, &cmdFlags);
935 /* The '+' command flag overrides the -n or -N options. */
936 if (cmdFlags.always && !run) {
938 * We're not actually executing anything...
939 * but this one needs to be - use compat mode just for it.
941 (void)Compat_RunCommand(ucmd, job->node, ln);
947 * If the shell doesn't have error control, the alternate echoing
948 * will be done (to avoid showing additional error checking code)
949 * and this needs some characters escaped.
951 escCmd = shell->hasErrCtl ? NULL : EscapeShellDblQuot(xcmd);
953 if (!cmdFlags.echo) {
954 if (job->echo && run && shell->hasEchoCtl) {
955 ShellWriter_EchoOff(wr);
957 if (shell->hasErrCtl)
958 cmdFlags.echo = true;
962 if (cmdFlags.ignerr) {
963 JobWriteSpecials(job, wr, escCmd, run, &cmdFlags, &cmdTemplate);
967 * If errors are being checked and the shell doesn't have
968 * error control but does supply an runChkTmpl template, then
969 * set up commands to run through it.
972 if (!shell->hasErrCtl && shell->runChkTmpl != NULL &&
973 shell->runChkTmpl[0] != '\0') {
974 if (job->echo && cmdFlags.echo) {
975 ShellWriter_EchoOff(wr);
976 ShellWriter_EchoCmd(wr, escCmd);
977 cmdFlags.echo = false;
980 * If it's a comment line or blank, avoid the possible
981 * syntax error generated by "{\n} || exit $?".
983 cmdTemplate = escCmd[0] == shell->commentChar ||
987 cmdFlags.ignerr = false;
991 if (DEBUG(SHELL) && strcmp(shellName, "sh") == 0)
992 ShellWriter_TraceOn(wr);
994 ShellWriter_WriteFmt(wr, cmdTemplate, xcmd);
999 ShellWriter_ErrOn(wr, cmdFlags.echo && job->echo);
1002 ShellWriter_EchoOn(wr);
1006 * Write all commands to the shell file that is later executed.
1008 * The special command "..." stops writing and saves the remaining commands
1009 * to be executed later, when the target '.END' is made.
1011 * Return whether at least one command was written to the shell file.
1014 JobWriteCommands(Job *job)
1020 wr.f = job->cmdFILE;
1023 for (ln = job->node->commands.first; ln != NULL; ln = ln->next) {
1024 const char *cmd = ln->datum;
1026 if (strcmp(cmd, "...") == 0) {
1027 job->node->type |= OP_SAVE_CMDS;
1028 job->tailCmds = ln->next;
1032 JobWriteCommand(job, &wr, ln, ln->datum);
1040 * Save the delayed commands (those after '...'), to be executed later in
1041 * the '.END' node, when everything else is done.
1044 JobSaveCommands(Job *job)
1048 for (ln = job->tailCmds; ln != NULL; ln = ln->next) {
1049 const char *cmd = ln->datum;
1052 * XXX: This Var_Subst is only intended to expand the dynamic
1053 * variables such as .TARGET, .IMPSRC. It is not intended to
1054 * expand the other variables as well; see deptgt-end.mk.
1056 expanded_cmd = Var_Subst(cmd, job->node, VARE_WANTRES);
1057 /* TODO: handle errors */
1058 Lst_Append(&Targ_GetEndNode()->commands, expanded_cmd);
1063 /* Called to close both input and output pipes when a job is finished. */
1065 JobClosePipes(Job *job)
1068 (void)close(job->outPipe);
1071 CollectOutput(job, true);
1072 (void)close(job->inPipe);
1077 DebugFailedJob(const Job *job)
1079 const StringListNode *ln;
1085 debug_printf("*** Failed target: %s\n", job->node->name);
1086 debug_printf("*** Failed commands:\n");
1087 for (ln = job->node->commands.first; ln != NULL; ln = ln->next) {
1088 const char *cmd = ln->datum;
1089 debug_printf("\t%s\n", cmd);
1091 if (strchr(cmd, '$') != NULL) {
1092 char *xcmd = Var_Subst(cmd, job->node, VARE_WANTRES);
1093 debug_printf("\t=> %s\n", xcmd);
1100 JobFinishDoneExitedError(Job *job, WAIT_T *inout_status)
1102 SwitchOutputTo(job->node);
1105 meta_job_error(job, job->node,
1106 job->ignerr, WEXITSTATUS(*inout_status));
1109 if (!shouldDieQuietly(job->node, -1)) {
1110 DebugFailedJob(job);
1111 (void)printf("*** [%s] Error code %d%s\n",
1112 job->node->name, WEXITSTATUS(*inout_status),
1113 job->ignerr ? " (ignored)" : "");
1117 WAIT_STATUS(*inout_status) = 0;
1120 JobDeleteTarget(job->node);
1121 PrintOnError(job->node, "\n");
1126 JobFinishDoneExited(Job *job, WAIT_T *inout_status)
1128 DEBUG2(JOB, "Process %d [%s] exited.\n", job->pid, job->node->name);
1130 if (WEXITSTATUS(*inout_status) != 0)
1131 JobFinishDoneExitedError(job, inout_status);
1132 else if (DEBUG(JOB)) {
1133 SwitchOutputTo(job->node);
1134 (void)printf("*** [%s] Completed successfully\n",
1140 JobFinishDoneSignaled(Job *job, WAIT_T status)
1142 SwitchOutputTo(job->node);
1143 DebugFailedJob(job);
1144 (void)printf("*** [%s] Signal %d\n", job->node->name, WTERMSIG(status));
1146 JobDeleteTarget(job->node);
1150 JobFinishDone(Job *job, WAIT_T *inout_status)
1152 if (WIFEXITED(*inout_status))
1153 JobFinishDoneExited(job, inout_status);
1155 JobFinishDoneSignaled(job, *inout_status);
1157 (void)fflush(stdout);
1161 * Do final processing for the given job including updating parent nodes and
1162 * starting new jobs as available/necessary.
1164 * Deferred commands for the job are placed on the .END node.
1166 * If there was a serious error (job_errors != 0; not an ignored one), no more
1167 * jobs will be started.
1171 * status sub-why job went away
1174 JobFinish (Job *job, WAIT_T status)
1176 bool done, return_job_token;
1178 DEBUG3(JOB, "JobFinish: %d [%s], status %d\n",
1179 job->pid, job->node->name, status);
1181 if ((WIFEXITED(status) &&
1182 ((WEXITSTATUS(status) != 0 && !job->ignerr))) ||
1183 WIFSIGNALED(status)) {
1184 /* Finished because of an error. */
1187 if (job->cmdFILE != NULL && job->cmdFILE != stdout) {
1188 if (fclose(job->cmdFILE) != 0)
1189 Punt("Cannot write shell script for '%s': %s",
1190 job->node->name, strerror(errno));
1191 job->cmdFILE = NULL;
1195 } else if (WIFEXITED(status)) {
1197 * Deal with ignored errors in -B mode. We need to print a
1198 * message telling of the ignored error as well as to run
1201 done = WEXITSTATUS(status) != 0;
1206 /* No need to close things down or anything. */
1211 JobFinishDone(job, &status);
1215 int meta_status = meta_job_finish(job);
1216 if (meta_status != 0 && status == 0)
1217 status = meta_status;
1221 return_job_token = false;
1223 Trace_Log(JOBEND, job);
1224 if (!job->special) {
1225 if (WAIT_STATUS(status) != 0 ||
1226 (aborting == ABORT_ERROR) || aborting == ABORT_INTERRUPT)
1227 return_job_token = true;
1230 if (aborting != ABORT_ERROR && aborting != ABORT_INTERRUPT &&
1231 (WAIT_STATUS(status) == 0)) {
1233 * As long as we aren't aborting and the job didn't return a
1234 * non-zero status that we shouldn't ignore, we call
1235 * Make_Update to update the parents.
1237 JobSaveCommands(job);
1238 job->node->made = MADE;
1240 return_job_token = true;
1241 Make_Update(job->node);
1242 job->status = JOB_ST_FREE;
1243 } else if (status != 0) {
1245 job->status = JOB_ST_FREE;
1248 if (job_errors > 0 && !opts.keepgoing && aborting != ABORT_INTERRUPT) {
1249 /* Prevent more jobs from getting started. */
1250 aborting = ABORT_ERROR;
1253 if (return_job_token)
1256 if (aborting == ABORT_ERROR && jobTokensRunning == 0)
1261 TouchRegular(GNode *gn)
1263 const char *file = GNode_Path(gn);
1264 struct utimbuf times;
1269 times.modtime = now;
1270 if (utime(file, ×) >= 0)
1273 fd = open(file, O_RDWR | O_CREAT, 0666);
1275 (void)fprintf(stderr, "*** couldn't touch %s: %s\n",
1276 file, strerror(errno));
1277 (void)fflush(stderr);
1278 return; /* XXX: What about propagating the error? */
1282 * Last resort: update the file's time stamps in the traditional way.
1283 * XXX: This doesn't work for empty files, which are sometimes used
1286 if (read(fd, &c, 1) == 1) {
1287 (void)lseek(fd, 0, SEEK_SET);
1288 while (write(fd, &c, 1) == -1 && errno == EAGAIN)
1291 (void)close(fd); /* XXX: What about propagating the error? */
1295 * Touch the given target. Called by JobStart when the -t flag was given.
1297 * The modification date of the file is changed.
1298 * If the file did not exist, it is created.
1301 Job_Touch(GNode *gn, bool echo)
1304 (OP_JOIN | OP_USE | OP_USEBEFORE | OP_EXEC | OP_OPTIONAL |
1305 OP_SPECIAL | OP_PHONY)) {
1307 * These are "virtual" targets and should not really be
1313 if (echo || !GNode_ShouldExecute(gn)) {
1314 (void)fprintf(stdout, "touch %s\n", gn->name);
1315 (void)fflush(stdout);
1318 if (!GNode_ShouldExecute(gn))
1321 if (gn->type & OP_ARCHV)
1323 else if (gn->type & OP_LIB)
1330 * Make sure the given node has all the commands it needs.
1332 * The node will have commands from the .DEFAULT rule added to it if it
1336 * gn The target whose commands need verifying
1337 * abortProc Function to abort with message
1340 * true if the commands list is/was ok.
1343 Job_CheckCommands(GNode *gn, void (*abortProc)(const char *, ...))
1345 if (GNode_IsTarget(gn))
1347 if (!Lst_IsEmpty(&gn->commands))
1349 if ((gn->type & OP_LIB) && !Lst_IsEmpty(&gn->children))
1353 * No commands. Look for .DEFAULT rule from which we might infer
1356 if (defaultNode != NULL && !Lst_IsEmpty(&defaultNode->commands) &&
1357 !(gn->type & OP_SPECIAL)) {
1359 * The traditional Make only looks for a .DEFAULT if the node
1360 * was never the target of an operator, so that's what we do
1363 * The .DEFAULT node acts like a transformation rule, in that
1364 * gn also inherits any attributes or sources attached to
1367 Make_HandleUse(defaultNode, gn);
1368 Var_Set(gn, IMPSRC, GNode_VarTarget(gn));
1372 Dir_UpdateMTime(gn, false);
1373 if (gn->mtime != 0 || (gn->type & OP_SPECIAL))
1377 * The node wasn't the target of an operator. We have no .DEFAULT
1378 * rule to go on and the target doesn't already exist. There's
1379 * nothing more we can do for this branch. If the -k flag wasn't
1380 * given, we stop in our tracks, otherwise we just don't update
1381 * this node's parents so they never get examined.
1384 if (gn->flags.fromDepend) {
1385 if (!Job_RunTarget(".STALE", gn->fname))
1387 "%s: %s, %u: ignoring stale %s for %s\n",
1388 progname, gn->fname, gn->lineno, makeDependfile,
1393 if (gn->type & OP_OPTIONAL) {
1394 (void)fprintf(stdout, "%s: don't know how to make %s (%s)\n",
1395 progname, gn->name, "ignored");
1396 (void)fflush(stdout);
1400 if (opts.keepgoing) {
1401 (void)fprintf(stdout, "%s: don't know how to make %s (%s)\n",
1402 progname, gn->name, "continuing");
1403 (void)fflush(stdout);
1407 abortProc("%s: don't know how to make %s. Stop", progname, gn->name);
1412 * Execute the shell for the given job.
1414 * See Job_CatchOutput for handling the output of the shell.
1417 JobExec(Job *job, char **argv)
1419 int cpid; /* ID of new child */
1425 debug_printf("Running %s\n", job->node->name);
1426 debug_printf("\tCommand: ");
1427 for (i = 0; argv[i] != NULL; i++) {
1428 debug_printf("%s ", argv[i]);
1434 * Some jobs produce no output and it's disconcerting to have
1435 * no feedback of their running (since they produce no output, the
1436 * banner with their name in it never appears). This is an attempt to
1437 * provide that feedback, even if nothing follows it.
1440 SwitchOutputTo(job->node);
1442 /* No interruptions until this job is on the `jobs' list */
1445 /* Pre-emptively mark job running, pid still zero though */
1446 job->status = JOB_ST_RUNNING;
1452 Punt("Cannot vfork: %s", strerror(errno));
1460 meta_job_child(job);
1463 * Reset all signal handlers; this is necessary because we
1464 * also need to unblock signals before we exec(2).
1468 /* Now unblock signals */
1469 sigemptyset(&tmask);
1470 JobSigUnlock(&tmask);
1473 * Must duplicate the input stream down to the child's input
1474 * and reset it to the beginning (again). Since the stream
1475 * was marked close-on-exec, we must clear that bit in the
1478 if (dup2(fileno(job->cmdFILE), 0) == -1)
1479 execDie("dup2", "job->cmdFILE");
1480 if (fcntl(0, F_SETFD, 0) == -1)
1481 execDie("fcntl clear close-on-exec", "stdin");
1482 if (lseek(0, 0, SEEK_SET) == -1)
1483 execDie("lseek to 0", "stdin");
1485 if (job->node->type & (OP_MAKE | OP_SUBMAKE)) {
1487 * Pass job token pipe to submakes.
1489 if (fcntl(tokenWaitJob.inPipe, F_SETFD, 0) == -1)
1490 execDie("clear close-on-exec",
1491 "tokenWaitJob.inPipe");
1492 if (fcntl(tokenWaitJob.outPipe, F_SETFD, 0) == -1)
1493 execDie("clear close-on-exec",
1494 "tokenWaitJob.outPipe");
1498 * Set up the child's output to be routed through the pipe
1499 * we've created for it.
1501 if (dup2(job->outPipe, 1) == -1)
1502 execDie("dup2", "job->outPipe");
1505 * The output channels are marked close on exec. This bit
1506 * was duplicated by the dup2(on some systems), so we have
1507 * to clear it before routing the shell's error output to
1508 * the same place as its standard output.
1510 if (fcntl(1, F_SETFD, 0) == -1)
1511 execDie("clear close-on-exec", "stdout");
1512 if (dup2(1, 2) == -1)
1513 execDie("dup2", "1, 2");
1516 * We want to switch the child into a different process
1517 * family so we can kill it and all its descendants in
1518 * one fell swoop, by killing its process family, but not
1521 #if defined(HAVE_SETPGID)
1522 (void)setpgid(0, getpid());
1524 # if defined(HAVE_SETSID)
1525 /* XXX: dsl - I'm sure this should be setpgrp()... */
1528 (void)setpgrp(0, getpid());
1532 (void)execv(shellPath, argv);
1533 execDie("exec", shellPath);
1536 /* Parent, continuing after the child exec */
1539 Trace_Log(JOBSTART, job);
1543 meta_job_parent(job, cpid);
1547 * Set the current position in the buffer to the beginning
1548 * and mark another stream to watch in the outputs mask
1554 if (job->cmdFILE != NULL && job->cmdFILE != stdout) {
1555 if (fclose(job->cmdFILE) != 0)
1556 Punt("Cannot write shell script for '%s': %s",
1557 job->node->name, strerror(errno));
1558 job->cmdFILE = NULL;
1561 /* Now that the job is actually running, add it to the table. */
1563 debug_printf("JobExec(%s): pid %d added to jobs table\n",
1564 job->node->name, job->pid);
1565 DumpJobs("job started");
1567 JobSigUnlock(&mask);
1570 /* Create the argv needed to execute the shell for a given job. */
1572 JobMakeArgv(Job *job, char **argv)
1575 static char args[10]; /* For merged arguments */
1577 argv[0] = UNCONST(shellName);
1580 if ((shell->errFlag != NULL && shell->errFlag[0] != '-') ||
1581 (shell->echoFlag != NULL && shell->echoFlag[0] != '-')) {
1583 * At least one of the flags doesn't have a minus before it,
1584 * so merge them together. Have to do this because the Bourne
1585 * shell thinks its second argument is a file to source.
1586 * Grrrr. Note the ten-character limitation on the combined
1589 * TODO: Research until when the above comments were
1590 * practically relevant.
1592 (void)snprintf(args, sizeof args, "-%s%s",
1594 (shell->errFlag != NULL ? shell->errFlag : "")),
1596 (shell->echoFlag != NULL ? shell->echoFlag : "")));
1598 if (args[1] != '\0') {
1603 if (!job->ignerr && shell->errFlag != NULL) {
1604 argv[argc] = UNCONST(shell->errFlag);
1607 if (job->echo && shell->echoFlag != NULL) {
1608 argv[argc] = UNCONST(shell->echoFlag);
1616 JobWriteShellCommands(Job *job, GNode *gn, bool *out_run)
1619 * tfile is the name of a file into which all shell commands
1620 * are put. It is removed before the child shell is executed,
1621 * unless DEBUG(SCRIPT) is set.
1623 char tfile[MAXPATHLEN];
1624 int tfd; /* File descriptor to the temp file */
1626 tfd = Job_TempFile(TMPPAT, tfile, sizeof tfile);
1628 job->cmdFILE = fdopen(tfd, "w+");
1629 if (job->cmdFILE == NULL)
1630 Punt("Could not fdopen %s", tfile);
1632 (void)fcntl(fileno(job->cmdFILE), F_SETFD, FD_CLOEXEC);
1636 meta_job_start(job, gn);
1637 if (gn->type & OP_SILENT) /* might have changed */
1642 *out_run = JobWriteCommands(job);
1646 * Start a target-creation process going for the target described by gn.
1649 * JOB_ERROR if there was an error in the commands, JOB_FINISHED
1650 * if there isn't actually anything left to do for the job and
1651 * JOB_RUNNING if the job has been started.
1654 * A new Job node is created and added to the list of running
1655 * jobs. PMake is forked and a child shell created.
1657 * NB: The return value is ignored by everyone.
1659 static JobStartResult
1660 JobStart(GNode *gn, bool special)
1662 Job *job; /* new job descriptor */
1663 char *argv[10]; /* Argument vector to shell */
1664 bool cmdsOK; /* true if the nodes commands were all right */
1667 for (job = job_table; job < job_table_end; job++) {
1668 if (job->status == JOB_ST_FREE)
1671 if (job >= job_table_end)
1672 Punt("JobStart no job slots vacant");
1674 memset(job, 0, sizeof *job);
1676 job->tailCmds = NULL;
1677 job->status = JOB_ST_SET_UP;
1679 job->special = special || gn->type & OP_SPECIAL;
1680 job->ignerr = opts.ignoreErrors || gn->type & OP_IGNORE;
1681 job->echo = !(opts.silent || gn->type & OP_SILENT);
1684 * Check the commands now so any attributes from .DEFAULT have a
1685 * chance to migrate to the node.
1687 cmdsOK = Job_CheckCommands(gn, Error);
1689 job->inPollfd = NULL;
1691 if (Lst_IsEmpty(&gn->commands)) {
1692 job->cmdFILE = stdout;
1696 * We're serious here, but if the commands were bogus, we're
1700 PrintOnError(gn, "\n"); /* provide some clue */
1703 } else if (((gn->type & OP_MAKE) && !opts.noRecursiveExecute) ||
1704 (!opts.noExecute && !opts.touch)) {
1706 * The above condition looks very similar to
1707 * GNode_ShouldExecute but is subtly different. It prevents
1708 * that .MAKE targets are touched since these are usually
1713 * We're serious here, but if the commands were bogus, we're
1717 PrintOnError(gn, "\n"); /* provide some clue */
1721 JobWriteShellCommands(job, gn, &run);
1722 (void)fflush(job->cmdFILE);
1723 } else if (!GNode_ShouldExecute(gn)) {
1725 * Just write all the commands to stdout in one fell swoop.
1726 * This still sets up job->tailCmds correctly.
1729 job->cmdFILE = stdout;
1731 JobWriteCommands(job);
1733 (void)fflush(job->cmdFILE);
1735 Job_Touch(gn, job->echo);
1739 /* If we're not supposed to execute a shell, don't. */
1743 /* Unlink and close the command file if we opened one */
1744 if (job->cmdFILE != NULL && job->cmdFILE != stdout) {
1745 (void)fclose(job->cmdFILE);
1746 job->cmdFILE = NULL;
1750 * We only want to work our way up the graph if we aren't
1751 * here because the commands for the job were no good.
1753 if (cmdsOK && aborting == ABORT_NONE) {
1754 JobSaveCommands(job);
1755 job->node->made = MADE;
1756 Make_Update(job->node);
1758 job->status = JOB_ST_FREE;
1759 return cmdsOK ? JOB_FINISHED : JOB_ERROR;
1763 * Set up the control arguments to the shell. This is based on the
1764 * flags set earlier for this job.
1766 JobMakeArgv(job, argv);
1768 /* Create the pipe by which we'll get the shell's output. */
1769 JobCreatePipe(job, 3);
1776 * If the shell has an output filter (which only csh and ksh have by default),
1777 * print the output of the child process, skipping the noPrint text of the
1780 * Return the part of the output that the calling function needs to output by
1784 PrintFilteredOutput(char *cp, char *endp) /* XXX: should all be const */
1786 char *ecp; /* XXX: should be const */
1788 if (shell->noPrint == NULL || shell->noPrint[0] == '\0')
1792 * XXX: What happens if shell->noPrint occurs on the boundary of
1793 * the buffer? To work correctly in all cases, this should rather
1794 * be a proper stream filter instead of doing string matching on
1795 * selected chunks of the output.
1797 while ((ecp = strstr(cp, shell->noPrint)) != NULL) {
1799 *ecp = '\0'; /* XXX: avoid writing to the buffer */
1801 * The only way there wouldn't be a newline after
1802 * this line is if it were the last in the buffer.
1803 * however, since the noPrint output comes after it,
1804 * there must be a newline, so we don't print one.
1806 /* XXX: What about null bytes in the output? */
1807 (void)fprintf(stdout, "%s", cp);
1808 (void)fflush(stdout);
1810 cp = ecp + shell->noPrintLen;
1813 cp++; /* skip over the (XXX: assumed) newline */
1814 pp_skip_whitespace(&cp);
1820 * This function is called whenever there is something to read on the pipe.
1821 * We collect more output from the given job and store it in the job's
1822 * outBuf. If this makes up a line, we print it tagged by the job's
1823 * identifier, as necessary.
1825 * In the output of the shell, the 'noPrint' lines are removed. If the
1826 * command is not alone on the line (the character after it is not \0 or
1827 * \n), we do print whatever follows it.
1830 * job the job whose output needs printing
1831 * finish true if this is the last time we'll be called
1835 CollectOutput(Job *job, bool finish)
1837 bool gotNL; /* true if got a newline */
1838 bool fbuf; /* true if our buffer filled up */
1839 size_t nr; /* number of bytes read */
1840 size_t i; /* auxiliary index into outBuf */
1841 size_t max; /* limit for i (end of current data) */
1842 ssize_t nRead; /* (Temporary) number of bytes read */
1844 /* Read as many bytes as will fit in the buffer. */
1849 nRead = read(job->inPipe, &job->outBuf[job->curPos],
1850 JOB_BUFSIZE - job->curPos);
1852 if (errno == EAGAIN)
1855 perror("CollectOutput(piperead)");
1861 finish = false; /* stop looping */
1864 * If we hit the end-of-file (the job is dead), we must flush its
1865 * remaining output, so pretend we read a newline if there's any
1866 * output remaining in the buffer.
1868 if (nr == 0 && job->curPos != 0) {
1869 job->outBuf[job->curPos] = '\n';
1873 max = job->curPos + nr;
1874 for (i = job->curPos; i < max; i++)
1875 if (job->outBuf[i] == '\0')
1876 job->outBuf[i] = ' ';
1878 /* Look for the last newline in the bytes we just got. */
1879 for (i = job->curPos + nr - 1;
1880 i >= job->curPos && i != (size_t)-1; i--) {
1881 if (job->outBuf[i] == '\n') {
1889 if (job->curPos == JOB_BUFSIZE) {
1891 * If we've run out of buffer space, we have no choice
1892 * but to print the stuff. sigh.
1898 if (gotNL || fbuf) {
1900 * Need to send the output to the screen. Null terminate it
1901 * first, overwriting the newline character if there was one.
1902 * So long as the line isn't one we should filter (according
1903 * to the shell description), we print the line, preceded
1904 * by a target banner if this target isn't the same as the
1905 * one for which we last printed something.
1906 * The rest of the data in the buffer are then shifted down
1907 * to the start of the buffer and curPos is set accordingly.
1909 job->outBuf[i] = '\0';
1910 if (i >= job->curPos) {
1914 * FIXME: SwitchOutputTo should be here, according to
1915 * the comment above. But since PrintOutput does not
1916 * do anything in the default shell, this bug has gone
1917 * unnoticed until now.
1919 cp = PrintFilteredOutput(job->outBuf, &job->outBuf[i]);
1922 * There's still more in the output buffer. This time,
1923 * though, we know there's no newline at the end, so
1924 * we add one of our own free will.
1928 SwitchOutputTo(job->node);
1931 meta_job_output(job, cp,
1935 (void)fprintf(stdout, "%s%s", cp,
1937 (void)fflush(stdout);
1941 * max is the last offset still in the buffer. Move any
1942 * remaining characters to the start of the buffer and
1943 * update the end marker curPos.
1946 (void)memmove(job->outBuf, &job->outBuf[i + 1],
1948 job->curPos = max - (i + 1);
1956 * If the finish flag is true, we must loop until we hit
1957 * end-of-file on the pipe. This is guaranteed to happen
1958 * eventually since the other end of the pipe is now closed
1959 * (we closed it explicitly and the child has exited). When
1960 * we do get an EOF, finish will be set false and we'll fall
1972 * Unfortunately it is too complicated to run .BEGIN, .END, and
1973 * .INTERRUPT job in the parallel job module. As of 2020-09-25,
1974 * unit-tests/deptgt-end-jobs.mk hangs in an endless loop.
1976 * Running these jobs in compat mode also guarantees that these
1977 * jobs do not overlap with other unrelated jobs.
1979 GNodeList lst = LST_INIT;
1980 Lst_Append(&lst, targ);
1981 (void)Make_Run(&lst);
1983 JobStart(targ, true);
1984 while (jobTokensRunning != 0) {
1988 Compat_Make(targ, targ);
1989 /* XXX: Replace with GNode_IsError(gn) */
1990 if (targ->made == ERROR) {
1991 PrintOnError(targ, "\n\nStop.\n");
1998 * Handle the exit of a child. Called from Make_Make.
2000 * The job descriptor is removed from the list of children.
2003 * We do waits, blocking or not, according to the wisdom of our
2004 * caller, until there are no more children to report. For each
2005 * job, call JobFinish to finish things off.
2008 Job_CatchChildren(void)
2010 int pid; /* pid of dead child */
2011 WAIT_T status; /* Exit/termination status */
2013 /* Don't even bother if we know there's no one around. */
2014 if (jobTokensRunning == 0)
2017 /* Have we received SIGCHLD since last call? */
2018 if (caught_sigchld == 0)
2022 while ((pid = waitpid((pid_t)-1, &status, WNOHANG | WUNTRACED)) > 0) {
2023 DEBUG2(JOB, "Process %d exited/stopped status %x.\n",
2024 pid, WAIT_STATUS(status));
2025 JobReapChild(pid, status, true);
2030 * It is possible that wait[pid]() was called from elsewhere,
2031 * this lets us reap jobs regardless.
2034 JobReapChild(pid_t pid, WAIT_T status, bool isJobs)
2036 Job *job; /* job descriptor for dead child */
2038 /* Don't even bother if we know there's no one around. */
2039 if (jobTokensRunning == 0)
2042 job = JobFindPid(pid, JOB_ST_RUNNING, isJobs);
2045 if (!lurking_children)
2046 Error("Child (%d) status %x not in table?",
2049 return; /* not ours */
2051 if (WIFSTOPPED(status)) {
2052 DEBUG2(JOB, "Process %d (%s) stopped.\n",
2053 job->pid, job->node->name);
2054 if (!make_suspended) {
2055 switch (WSTOPSIG(status)) {
2057 (void)printf("*** [%s] Suspended\n",
2061 (void)printf("*** [%s] Stopped\n",
2065 (void)printf("*** [%s] Stopped -- signal %d\n",
2066 job->node->name, WSTOPSIG(status));
2068 job->suspended = true;
2070 (void)fflush(stdout);
2074 job->status = JOB_ST_FINISHED;
2075 job->exit_status = WAIT_STATUS(status);
2077 JobFinish(job, status);
2081 * Catch the output from our children, if we're using pipes do so. Otherwise
2082 * just block time until we get a signal(most likely a SIGCHLD) since there's
2083 * no point in just spinning when there's nothing to do and the reaping of a
2084 * child can wait for a while.
2087 Job_CatchOutput(void)
2093 (void)fflush(stdout);
2095 /* The first fd in the list is the job token pipe */
2097 nready = poll(fds + 1 - wantToken, fdsLen - 1 + wantToken,
2099 } while (nready < 0 && errno == EINTR);
2102 Punt("poll: %s", strerror(errno));
2104 if (nready > 0 && readyfd(&childExitJob)) {
2107 count = read(childExitJob.inPipe, &token, 1);
2109 if (token == DO_JOB_RESUME[0])
2111 * Complete relay requested from our SIGCONT
2115 } else if (count == 0)
2116 Punt("unexpected eof on token pipe");
2117 else if (errno != EAGAIN)
2118 Punt("token pipe read: %s", strerror(errno));
2122 Job_CatchChildren();
2126 for (i = npseudojobs * nfds_per_job(); i < fdsLen; i++) {
2127 if (fds[i].revents == 0)
2129 job = jobByFdIndex[i];
2130 if (job->status == JOB_ST_RUNNING)
2131 CollectOutput(job, false);
2132 #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV)
2134 * With meta mode, we may have activity on the job's filemon
2135 * descriptor too, which at the moment is any pollfd other
2136 * than job->inPollfd.
2138 if (useMeta && job->inPollfd != &fds[i]) {
2139 if (meta_job_event(job) <= 0)
2140 fds[i].events = 0; /* never mind */
2149 * Start the creation of a target. Basically a front-end for JobStart used by
2155 (void)JobStart(gn, false);
2159 InitShellNameAndPath(void)
2161 shellName = shell->name;
2163 #ifdef DEFSHELL_CUSTOM
2164 if (shellName[0] == '/') {
2165 shellPath = shellName;
2166 shellName = str_basename(shellPath);
2170 #ifdef DEFSHELL_PATH
2171 shellPath = DEFSHELL_PATH;
2173 shellPath = str_concat3(_PATH_DEFSHELLDIR, "/", shellName);
2180 if (shellPath == NULL)
2181 InitShellNameAndPath();
2183 Var_SetWithFlags(SCOPE_CMDLINE, ".SHELL", shellPath, VAR_SET_READONLY);
2184 if (shell->errFlag == NULL)
2185 shell->errFlag = "";
2186 if (shell->echoFlag == NULL)
2187 shell->echoFlag = "";
2188 if (shell->hasErrCtl && shell->errFlag[0] != '\0') {
2189 if (shellErrFlag != NULL &&
2190 strcmp(shell->errFlag, &shellErrFlag[1]) != 0) {
2192 shellErrFlag = NULL;
2194 if (shellErrFlag == NULL)
2195 shellErrFlag = str_concat2("-", shell->errFlag);
2196 } else if (shellErrFlag != NULL) {
2198 shellErrFlag = NULL;
2203 * Return the string literal that is used in the current command shell
2204 * to produce a newline character.
2207 Shell_GetNewline(void)
2209 return shell->newline;
2215 if (targPrefix != NULL) {
2217 } else if (!Var_Exists(SCOPE_GLOBAL, ".MAKE.JOB.PREFIX")) {
2218 Global_Set(".MAKE.JOB.PREFIX", "---");
2221 targPrefix = Var_Subst("${.MAKE.JOB.PREFIX}",
2222 SCOPE_GLOBAL, VARE_WANTRES);
2223 /* TODO: handle errors */
2227 AddSig(int sig, SignalProc handler)
2229 if (bmake_signal(sig, SIG_IGN) != SIG_IGN) {
2230 sigaddset(&caught_signals, sig);
2231 (void)bmake_signal(sig, handler);
2235 /* Initialize the process module. */
2240 /* Allocate space for all the job info */
2241 job_table = bmake_malloc((size_t)opts.maxJobs * sizeof *job_table);
2242 memset(job_table, 0, (size_t)opts.maxJobs * sizeof *job_table);
2243 job_table_end = job_table + opts.maxJobs;
2247 aborting = ABORT_NONE;
2251 * There is a non-zero chance that we already have children.
2252 * eg after 'make -f- <<EOF'
2253 * Since their termination causes a 'Child (pid) not in table'
2254 * message, Collect the status of any that are already dead, and
2255 * suppress the error message if there are any undead ones.
2261 rval = waitpid((pid_t)-1, &status, WNOHANG);
2265 lurking_children = true;
2271 JobCreatePipe(&childExitJob, 3);
2274 /* Preallocate enough for the maximum number of jobs. */
2275 size_t nfds = (npseudojobs + (size_t)opts.maxJobs) *
2277 fds = bmake_malloc(sizeof *fds * nfds);
2278 jobByFdIndex = bmake_malloc(sizeof *jobByFdIndex * nfds);
2281 /* These are permanent entries and take slots 0 and 1 */
2282 watchfd(&tokenWaitJob);
2283 watchfd(&childExitJob);
2285 sigemptyset(&caught_signals);
2287 * Install a SIGCHLD handler.
2289 (void)bmake_signal(SIGCHLD, JobChildSig);
2290 sigaddset(&caught_signals, SIGCHLD);
2293 * Catch the four signals that POSIX specifies if they aren't ignored.
2294 * JobPassSig will take care of calling JobInterrupt if appropriate.
2296 AddSig(SIGINT, JobPassSig_int);
2297 AddSig(SIGHUP, JobPassSig_term);
2298 AddSig(SIGTERM, JobPassSig_term);
2299 AddSig(SIGQUIT, JobPassSig_term);
2302 * There are additional signals that need to be caught and passed if
2303 * either the export system wants to be told directly of signals or if
2304 * we're giving each job its own process group (since then it won't get
2305 * signals from the terminal driver as we own the terminal)
2307 AddSig(SIGTSTP, JobPassSig_suspend);
2308 AddSig(SIGTTOU, JobPassSig_suspend);
2309 AddSig(SIGTTIN, JobPassSig_suspend);
2310 AddSig(SIGWINCH, JobCondPassSig);
2311 AddSig(SIGCONT, JobContinueSig);
2313 (void)Job_RunTarget(".BEGIN", NULL);
2315 * Create the .END node now, even though no code in the unit tests
2316 * depends on it. See also Targ_GetEndNode in Compat_MakeAll.
2318 (void)Targ_GetEndNode();
2324 if (sigismember(&caught_signals, sig) != 0)
2325 (void)bmake_signal(sig, SIG_DFL);
2340 (void)bmake_signal(SIGCHLD, SIG_DFL);
2343 /* Find a shell in 'shells' given its name, or return NULL. */
2345 FindShellByName(const char *name)
2348 const Shell *shellsEnd = sh + sizeof shells / sizeof shells[0];
2350 for (sh = shells; sh < shellsEnd; sh++) {
2351 if (strcmp(name, sh->name) == 0)
2358 * Parse a shell specification and set up 'shell', shellPath and
2359 * shellName appropriately.
2362 * line The shell spec
2365 * false if the specification was incorrect.
2368 * 'shell' points to a Shell structure (either predefined or
2369 * created from the shell spec), shellPath is the full path of the
2370 * shell described by 'shell', while shellName is just the
2371 * final component of shellPath.
2374 * A shell specification consists of a .SHELL target, with dependency
2375 * operator, followed by a series of blank-separated words. Double
2376 * quotes can be used to use blanks in words. A backslash escapes
2377 * anything (most notably a double-quote and a space) and
2378 * provides the functionality it does in C. Each word consists of
2379 * keyword and value separated by an equal sign. There should be no
2380 * unnecessary spaces in the word. The keywords are as follows:
2381 * name Name of shell.
2382 * path Location of shell.
2383 * quiet Command to turn off echoing.
2384 * echo Command to turn echoing on
2385 * filter Result of turning off echoing that shouldn't be
2387 * echoFlag Flag to turn echoing on at the start
2388 * errFlag Flag to turn error checking on at the start
2389 * hasErrCtl True if shell has error checking control
2390 * newline String literal to represent a newline char
2391 * check Command to turn on error checking if hasErrCtl
2392 * is true or template of command to echo a command
2393 * for which error checking is off if hasErrCtl is
2395 * ignore Command to turn off error checking if hasErrCtl
2396 * is true or template of command to execute a
2397 * command so as to ignore any errors it returns if
2398 * hasErrCtl is false.
2401 Job_ParseShell(char *line)
2409 bool fullSpec = false;
2412 /* XXX: don't use line as an iterator variable */
2413 pp_skip_whitespace(&line);
2417 memset(&newShell, 0, sizeof newShell);
2420 * Parse the specification by keyword
2422 wordsList = Str_Words(line, true);
2423 words = wordsList.words;
2424 argc = wordsList.len;
2425 path = wordsList.freeIt;
2426 if (words == NULL) {
2427 Error("Unterminated quoted string [%s]", line);
2430 shell_freeIt = path;
2432 for (path = NULL, argv = words; argc != 0; argc--, argv++) {
2434 if (strncmp(arg, "path=", 5) == 0) {
2436 } else if (strncmp(arg, "name=", 5) == 0) {
2437 newShell.name = arg + 5;
2439 if (strncmp(arg, "quiet=", 6) == 0) {
2440 newShell.echoOff = arg + 6;
2441 } else if (strncmp(arg, "echo=", 5) == 0) {
2442 newShell.echoOn = arg + 5;
2443 } else if (strncmp(arg, "filter=", 7) == 0) {
2444 newShell.noPrint = arg + 7;
2445 newShell.noPrintLen = strlen(newShell.noPrint);
2446 } else if (strncmp(arg, "echoFlag=", 9) == 0) {
2447 newShell.echoFlag = arg + 9;
2448 } else if (strncmp(arg, "errFlag=", 8) == 0) {
2449 newShell.errFlag = arg + 8;
2450 } else if (strncmp(arg, "hasErrCtl=", 10) == 0) {
2452 newShell.hasErrCtl = c == 'Y' || c == 'y' ||
2453 c == 'T' || c == 't';
2454 } else if (strncmp(arg, "newline=", 8) == 0) {
2455 newShell.newline = arg + 8;
2456 } else if (strncmp(arg, "check=", 6) == 0) {
2458 * Before 2020-12-10, these two variables had
2459 * been a single variable.
2461 newShell.errOn = arg + 6;
2462 newShell.echoTmpl = arg + 6;
2463 } else if (strncmp(arg, "ignore=", 7) == 0) {
2465 * Before 2020-12-10, these two variables had
2466 * been a single variable.
2468 newShell.errOff = arg + 7;
2469 newShell.runIgnTmpl = arg + 7;
2470 } else if (strncmp(arg, "errout=", 7) == 0) {
2471 newShell.runChkTmpl = arg + 7;
2472 } else if (strncmp(arg, "comment=", 8) == 0) {
2473 newShell.commentChar = arg[8];
2475 Parse_Error(PARSE_FATAL,
2476 "Unknown keyword \"%s\"", arg);
2486 * If no path was given, the user wants one of the
2487 * pre-defined shells, yes? So we find the one s/he wants
2488 * with the help of FindShellByName and set things up the
2489 * right way. shellPath will be set up by Shell_Init.
2491 if (newShell.name == NULL) {
2492 Parse_Error(PARSE_FATAL,
2493 "Neither path nor name specified");
2497 if ((sh = FindShellByName(newShell.name)) == NULL) {
2498 Parse_Error(PARSE_WARNING,
2499 "%s: No matching shell", newShell.name);
2504 shellName = newShell.name;
2505 if (shellPath != NULL) {
2507 * Shell_Init has already been called!
2510 free(UNCONST(shellPath));
2517 * The user provided a path. If s/he gave nothing else
2518 * (fullSpec is false), try and find a matching shell in the
2519 * ones we know of. Else we just take the specification at
2520 * its word and copy it to a new location. In either case,
2521 * we need to record the path the user gave for the shell.
2524 path = strrchr(path, '/');
2526 path = UNCONST(shellPath);
2530 if (newShell.name != NULL) {
2531 shellName = newShell.name;
2536 if ((sh = FindShellByName(shellName)) == NULL) {
2537 Parse_Error(PARSE_WARNING,
2538 "%s: No matching shell", shellName);
2544 shell = bmake_malloc(sizeof *shell);
2547 /* this will take care of shellErrFlag */
2551 if (shell->echoOn != NULL && shell->echoOff != NULL)
2552 shell->hasEchoCtl = true;
2554 if (!shell->hasErrCtl) {
2555 if (shell->echoTmpl == NULL)
2556 shell->echoTmpl = "";
2557 if (shell->runIgnTmpl == NULL)
2558 shell->runIgnTmpl = "%s\n";
2562 * Do not free up the words themselves, since they might be in use
2563 * by the shell specification.
2570 * Handle the receipt of an interrupt.
2572 * All children are killed. Another job will be started if the .INTERRUPT
2573 * target is defined.
2576 * runINTERRUPT Non-zero if commands for the .INTERRUPT target
2577 * should be executed
2578 * signo signal received
2581 JobInterrupt(bool runINTERRUPT, int signo)
2583 Job *job; /* job descriptor in that element */
2584 GNode *interrupt; /* the node describing the .INTERRUPT target */
2588 aborting = ABORT_INTERRUPT;
2592 for (job = job_table; job < job_table_end; job++) {
2593 if (job->status != JOB_ST_RUNNING)
2598 JobDeleteTarget(gn);
2599 if (job->pid != 0) {
2601 "JobInterrupt passing signal %d to child %d.\n",
2603 KILLPG(job->pid, signo);
2607 JobSigUnlock(&mask);
2609 if (runINTERRUPT && !opts.touch) {
2610 interrupt = Targ_FindNode(".INTERRUPT");
2611 if (interrupt != NULL) {
2612 opts.ignoreErrors = false;
2616 Trace_Log(MAKEINTR, NULL);
2617 exit(signo); /* XXX: why signo? */
2621 * Do the final processing, i.e. run the commands attached to the .END target.
2623 * Return the number of errors reported.
2628 GNode *endNode = Targ_GetEndNode();
2629 if (!Lst_IsEmpty(&endNode->commands) ||
2630 !Lst_IsEmpty(&endNode->children)) {
2631 if (job_errors != 0) {
2632 Error("Errors reported so .END ignored");
2640 /* Clean up any memory used by the jobs module. */
2650 * Waits for all running jobs to finish and returns.
2651 * Sets 'aborting' to ABORT_WAIT to prevent other jobs from starting.
2656 aborting = ABORT_WAIT;
2657 while (jobTokensRunning != 0) {
2660 aborting = ABORT_NONE;
2664 * Abort all currently running jobs without handling output or anything.
2665 * This function is to be called only in the event of a major error.
2666 * Most definitely NOT to be called from JobInterrupt.
2668 * All children are killed, not just the firstborn.
2673 Job *job; /* the job descriptor in that element */
2676 aborting = ABORT_ERROR;
2678 if (jobTokensRunning != 0) {
2679 for (job = job_table; job < job_table_end; job++) {
2680 if (job->status != JOB_ST_RUNNING)
2683 * kill the child process with increasingly drastic
2684 * signals to make darn sure it's dead.
2686 KILLPG(job->pid, SIGINT);
2687 KILLPG(job->pid, SIGKILL);
2692 * Catch as many children as want to report in at first, then give up
2694 while (waitpid((pid_t)-1, &foo, WNOHANG) > 0)
2699 * Tries to restart stopped jobs if there are slots available.
2700 * Called in process context in response to a SIGCONT.
2703 JobRestartJobs(void)
2707 for (job = job_table; job < job_table_end; job++) {
2708 if (job->status == JOB_ST_RUNNING &&
2709 (make_suspended || job->suspended)) {
2710 DEBUG1(JOB, "Restarting stopped job pid %d.\n",
2712 if (job->suspended) {
2713 (void)printf("*** [%s] Continued\n",
2715 (void)fflush(stdout);
2717 job->suspended = false;
2718 if (KILLPG(job->pid, SIGCONT) != 0 && DEBUG(JOB)) {
2719 debug_printf("Failed to send SIGCONT to %d\n",
2723 if (job->status == JOB_ST_FINISHED) {
2725 * Job exit deferred after calling waitpid() in a
2728 JobFinish(job, job->exit_status);
2731 make_suspended = false;
2737 if (job->inPollfd != NULL)
2738 Punt("Watching watched job");
2740 fds[fdsLen].fd = job->inPipe;
2741 fds[fdsLen].events = POLLIN;
2742 jobByFdIndex[fdsLen] = job;
2743 job->inPollfd = &fds[fdsLen];
2745 #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV)
2747 fds[fdsLen].fd = meta_job_fd(job);
2748 fds[fdsLen].events = fds[fdsLen].fd == -1 ? 0 : POLLIN;
2749 jobByFdIndex[fdsLen] = job;
2759 if (job->inPollfd == NULL)
2760 Punt("Unwatching unwatched job");
2761 i = (size_t)(job->inPollfd - fds);
2763 #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV)
2766 * Sanity check: there should be two fds per job, so the job's
2767 * pollfd number should be even.
2769 assert(nfds_per_job() == 2);
2771 Punt("odd-numbered fd with meta");
2776 * Move last job in table into hole made by dead job.
2779 fds[i] = fds[fdsLen];
2780 jobByFdIndex[i] = jobByFdIndex[fdsLen];
2781 jobByFdIndex[i]->inPollfd = &fds[i];
2782 #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV)
2784 fds[i + 1] = fds[fdsLen + 1];
2785 jobByFdIndex[i + 1] = jobByFdIndex[fdsLen + 1];
2789 job->inPollfd = NULL;
2795 if (job->inPollfd == NULL)
2796 Punt("Polling unwatched job");
2797 return (job->inPollfd->revents & POLLIN) != 0;
2801 * Put a token (back) into the job pipe.
2802 * This allows a make process to start a build job.
2807 char tok = JOB_TOKENS[aborting], tok1;
2809 /* If we are depositing an error token flush everything else */
2810 while (tok != '+' && read(tokenWaitJob.inPipe, &tok1, 1) == 1)
2813 DEBUG3(JOB, "(%d) aborting %d, deposit token %c\n",
2814 getpid(), aborting, tok);
2815 while (write(tokenWaitJob.outPipe, &tok, 1) == -1 && errno == EAGAIN)
2819 /* Get a temp file */
2821 Job_TempFile(const char *pattern, char *tfile, size_t tfile_sz)
2827 fd = mkTempFile(pattern, tfile, tfile_sz);
2828 if (tfile != NULL && !DEBUG(SCRIPT))
2830 JobSigUnlock(&mask);
2835 /* Prep the job token pipe in the root make process. */
2837 Job_ServerStart(int max_tokens, int jp_0, int jp_1)
2842 if (jp_0 >= 0 && jp_1 >= 0) {
2843 /* Pipe passed in from parent */
2844 tokenWaitJob.inPipe = jp_0;
2845 tokenWaitJob.outPipe = jp_1;
2846 (void)fcntl(jp_0, F_SETFD, FD_CLOEXEC);
2847 (void)fcntl(jp_1, F_SETFD, FD_CLOEXEC);
2851 JobCreatePipe(&tokenWaitJob, 15);
2853 snprintf(jobarg, sizeof jobarg, "%d,%d",
2854 tokenWaitJob.inPipe, tokenWaitJob.outPipe);
2856 Global_Append(MAKEFLAGS, "-J");
2857 Global_Append(MAKEFLAGS, jobarg);
2860 * Preload the job pipe with one token per job, save the one
2861 * "extra" token for the primary job.
2863 * XXX should clip maxJobs against PIPE_BUF -- if max_tokens is
2864 * larger than the write buffer size of the pipe, we will
2867 for (i = 1; i < max_tokens; i++)
2871 /* Return a withdrawn token to the pool. */
2873 Job_TokenReturn(void)
2876 if (jobTokensRunning < 0)
2877 Punt("token botch");
2878 if (jobTokensRunning != 0 || JOB_TOKENS[aborting] != '+')
2883 * Attempt to withdraw a token from the pool.
2885 * If pool is empty, set wantToken so that we wake up when a token is
2888 * Returns true if a token was withdrawn, and false if the pool is currently
2892 Job_TokenWithdraw(void)
2898 DEBUG3(JOB, "Job_TokenWithdraw(%d): aborting %d, running %d\n",
2899 getpid(), aborting, jobTokensRunning);
2901 if (aborting != ABORT_NONE || (jobTokensRunning >= opts.maxJobs))
2904 count = read(tokenWaitJob.inPipe, &tok, 1);
2906 Fatal("eof on job pipe!");
2907 if (count < 0 && jobTokensRunning != 0) {
2908 if (errno != EAGAIN) {
2909 Fatal("job pipe read: %s", strerror(errno));
2911 DEBUG1(JOB, "(%d) blocked for token\n", getpid());
2916 if (count == 1 && tok != '+') {
2917 /* make being aborted - remove any other job tokens */
2918 DEBUG2(JOB, "(%d) aborted by token %c\n", getpid(), tok);
2919 while (read(tokenWaitJob.inPipe, &tok1, 1) == 1)
2921 /* And put the stopper back */
2922 while (write(tokenWaitJob.outPipe, &tok, 1) == -1 &&
2925 if (shouldDieQuietly(NULL, 1))
2926 exit(6); /* we aborted */
2927 Fatal("A failure has been detected "
2928 "in another branch of the parallel make");
2931 if (count == 1 && jobTokensRunning == 0)
2932 /* We didn't want the token really */
2933 while (write(tokenWaitJob.outPipe, &tok, 1) == -1 &&
2938 DEBUG1(JOB, "(%d) withdrew token\n", getpid());
2943 * Run the named target if found. If a filename is specified, then set that
2946 * Exits if the target fails.
2949 Job_RunTarget(const char *target, const char *fname)
2951 GNode *gn = Targ_FindNode(target);
2956 Var_Set(gn, ALLSRC, fname);
2959 /* XXX: Replace with GNode_IsError(gn) */
2960 if (gn->made == ERROR) {
2961 PrintOnError(gn, "\n\nStop.\n");
2969 emul_poll(struct pollfd *fd, int nfd, int timeout)
2972 int i, maxfd, nselect, npoll;
2973 struct timeval tv, *tvp;
2980 for (i = 0; i < nfd; i++) {
2983 if (fd[i].events & POLLIN)
2984 FD_SET(fd[i].fd, &rfds);
2986 if (fd[i].events & POLLOUT)
2987 FD_SET(fd[i].fd, &wfds);
2989 if (fd[i].fd > maxfd)
2993 if (maxfd >= FD_SETSIZE) {
2994 Punt("Ran out of fd_set slots; "
2995 "recompile with a larger FD_SETSIZE.");
3001 usecs = timeout * 1000;
3002 tv.tv_sec = usecs / 1000000;
3003 tv.tv_usec = usecs % 1000000;
3007 nselect = select(maxfd + 1, &rfds, &wfds, NULL, tvp);
3013 for (i = 0; i < nfd; i++) {
3014 if (FD_ISSET(fd[i].fd, &rfds))
3015 fd[i].revents |= POLLIN;
3017 if (FD_ISSET(fd[i].fd, &wfds))
3018 fd[i].revents |= POLLOUT;
3026 #endif /* USE_SELECT */