1 .\" Copyright (c) 1980, 1991, 1993
2 .\" The Regents of the University of California. All rights reserved.
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\" notice, this list of conditions and the following disclaimer.
9 .\" 2. Redistributions in binary form must reproduce the above copyright
10 .\" notice, this list of conditions and the following disclaimer in the
11 .\" documentation and/or other materials provided with the distribution.
12 .\" 3. All advertising materials mentioning features or use of this software
13 .\" must display the following acknowledgement:
14 .\" This product includes software developed by the University of
15 .\" California, Berkeley and its contributors.
16 .\" 4. Neither the name of the University nor the names of its contributors
17 .\" may be used to endorse or promote products derived from this software
18 .\" without specific prior written permission.
20 .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 .\" @(#)signal.3 8.3 (Berkeley) 4/19/94
40 .Nd simplified software signal facilities
45 .\" XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX
46 .\" The prototype for signal(3) cannot be cleanly marked up in -mdoc
47 .\" without the following lower-level tweak.
48 .nr in-synopsis-section 0
53 .Fa "void \*(lp*func\*(rp\*(lpint\*(rp"
55 .Ft "\*(rp\*(lpint\*(rp" ;
57 .nr in-synopsis-section 1
58 .\" XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX
61 equivalent but easier to read typedef'd version:
62 .Ft typedef "void \*(lp*sig_t\*(rp \*(lpint\*(rp" ;
65 .Fn signal "int sig" "sig_t func"
70 is a simplified interface to the more general
74 Signals allow the manipulation of a process from outside its
75 domain as well as allowing the process to manipulate itself or
76 copies of itself (children).
77 There are two general types of signals:
78 those that cause termination of a process and those that do not.
79 Signals which cause termination of a program might result from
80 an irrecoverable error or might be the result of a user at a terminal
81 typing the `interrupt' character.
82 Signals are used when a process is stopped because it wishes to access
83 its control terminal while in the background (see
85 Signals are optionally generated
86 when a process resumes after being stopped,
87 when the status of child processes changes,
88 or when input is ready at the control terminal.
89 Most signals result in the termination of the process receiving them
91 is taken; some signals instead cause the process receiving them
92 to be stopped, or are simply discarded if the process has not
100 function allows for a signal to be caught, to be ignored, or to generate
102 These signals are defined in the file
104 .Bl -column No ".Dv SIGVTALRM" "create core image"
105 .It Sy "No Name Default Action Description"
106 .It 1 Ta Dv SIGHUP Ta "terminate process" Ta "terminal line hangup"
107 .It 2 Ta Dv SIGINT Ta "terminate process" Ta "interrupt program"
108 .It 3 Ta Dv SIGQUIT Ta "create core image" Ta "quit program"
109 .It 4 Ta Dv SIGILL Ta "create core image" Ta "illegal instruction"
110 .It 5 Ta Dv SIGTRAP Ta "create core image" Ta "trace trap"
111 .It 6 Ta Dv SIGABRT Ta "create core image" Ta "abort program"
114 .It 7 Ta Dv SIGEMT Ta "create core image" Ta "emulate instruction executed"
115 .It 8 Ta Dv SIGFPE Ta "create core image" Ta "floating-point exception"
116 .It 9 Ta Dv SIGKILL Ta "terminate process" Ta "kill program"
117 .It 10 Ta Dv SIGBUS Ta "create core image" Ta "bus error"
118 .It 11 Ta Dv SIGSEGV Ta "create core image" Ta "segmentation violation"
119 .It 12 Ta Dv SIGSYS Ta "create core image" Ta "non-existent system call invoked"
120 .It 13 Ta Dv SIGPIPE Ta "terminate process" Ta "write on a pipe with no reader"
121 .It 14 Ta Dv SIGALRM Ta "terminate process" Ta "real-time timer expired"
122 .It 15 Ta Dv SIGTERM Ta "terminate process" Ta "software termination signal"
123 .It 16 Ta Dv SIGURG Ta "discard signal" Ta "urgent condition present on socket"
124 .It 17 Ta Dv SIGSTOP Ta "stop process" Ta "stop (cannot be caught or ignored)"
125 .It 18 Ta Dv SIGTSTP Ta "stop process" Ta "stop signal generated from keyboard"
126 .It 19 Ta Dv SIGCONT Ta "discard signal" Ta "continue after stop"
127 .It 20 Ta Dv SIGCHLD Ta "discard signal" Ta "child status has changed"
128 .It 21 Ta Dv SIGTTIN Ta "stop process" Ta "background read attempted from"
130 .It 22 Ta Dv SIGTTOU Ta "stop process" Ta "background write attempted to"
132 .It 23 Ta Dv SIGIO Ta "discard signal" Ta Tn "I/O"
133 is possible on a descriptor (see
135 .It 24 Ta Dv SIGXCPU Ta "terminate process" Ta "cpu time limit exceeded (see"
137 .It 25 Ta Dv SIGXFSZ Ta "terminate process" Ta "file size limit exceeded (see"
139 .It 26 Ta Dv SIGVTALRM Ta "terminate process" Ta "virtual time alarm (see"
141 .It 27 Ta Dv SIGPROF Ta "terminate process" Ta "profiling timer alarm (see"
143 .It 28 Ta Dv SIGWINCH Ta "discard signal" Ta "Window size change"
144 .It 29 Ta Dv SIGINFO Ta "discard signal" Ta "status request from keyboard"
145 .It 30 Ta Dv SIGUSR1 Ta "terminate process" Ta "User defined signal 1"
146 .It 31 Ta Dv SIGUSR2 Ta "terminate process" Ta "User defined signal 2"
147 .It 32 Ta Dv SIGTHR Ta "terminate process" Ta "thread interrupt"
152 argument specifies which signal was received.
155 procedure allows a user to choose the action upon receipt of a signal.
156 To set the default action of the signal to occur as listed above,
162 resets the default action.
167 This will cause subsequent instances of the signal to be ignored
168 and pending instances to be discarded.
172 further occurrences of the signal are
173 automatically blocked and
177 The handled signal is unblocked when the
179 the process continues from where it left off when the signal occurred.
181 Unlike previous signal facilities, the handler
182 func() remains installed after a signal has been delivered.
185 For some system calls, if a signal is caught while the call is
186 executing and the call is prematurely terminated,
187 the call is automatically restarted.
188 (The handler is installed using the
192 The affected system calls include
200 on a communications channel or a low speed device
205 However, calls that have already committed are not restarted,
206 but instead return a partial success (for example, a short read count).
207 These semantics could be changed with
210 When a process which has installed signal handlers forks,
211 the child process inherits the signals.
212 All caught signals may be reset to their default action by a call
216 ignored signals remain ignored.
218 If a process explicitly specifies
220 as the action for the signal
222 the system will not create zombie processes when children
223 of the calling process exit.
224 As a consequence, the system will discard the exit status
225 from the child processes.
226 If the calling process subsequently issues a call to
228 or equivalent, it will block until all of the calling process's
229 children terminate, and then return a value of \-1 with
236 for a list of functions
237 that are considered safe for use in signal handlers.
239 The previous action is returned on a successful call.
240 Otherwise, SIG_ERR is returned and the global variable
242 is set to indicate the error.
247 will fail and no action will take place if one of the
254 is not a valid signal number.
256 An attempt is made to ignore or supply a handler for
279 The option to avoid the creation of child zombies through ignoring