]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - libexec/rc/network.subr
Make linux_ptrace() use linux_msg() instead of printf().
[FreeBSD/FreeBSD.git] / libexec / rc / network.subr
1 #
2 # Copyright (c) 2003 The FreeBSD Project. All rights reserved.
3 #
4 # Redistribution and use in source and binary forms, with or without
5 # modification, are permitted provided that the following conditions
6 # are met:
7 # 1. Redistributions of source code must retain the above copyright
8 #    notice, this list of conditions and the following disclaimer.
9 # 2. Redistributions in binary form must reproduce the above copyright
10 #    notice, this list of conditions and the following disclaimer in the
11 #    documentation and/or other materials provided with the distribution.
12 #
13 # THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
14 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 # ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
17 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23 # SUCH DAMAGE.
24 #
25 # $FreeBSD$
26 #
27 IFCONFIG_CMD="/sbin/ifconfig"
28 : ${netif_ipexpand_max:=2048}
29
30 #
31 # Subroutines commonly used from network startup scripts.
32 # Requires that rc.conf be loaded first.
33 #
34
35 # ifn_start ifn
36 #       Bring up and configure an interface.  If some configuration is
37 #       applied, print the interface configuration.
38 #
39 ifn_start()
40 {
41         local ifn cfg
42         ifn="$1"
43         cfg=1
44
45         [ -z "$ifn" ] && err 1 "ifn_start called without an interface"
46
47         ifscript_up ${ifn} && cfg=0
48         ifconfig_up ${ifn} && cfg=0
49         if ! noafif $ifn; then
50                 afexists inet && ipv4_up ${ifn} && cfg=0
51                 afexists inet6 && ipv6_up ${ifn} && cfg=0
52         fi
53         childif_create ${ifn} && cfg=0
54
55         return $cfg
56 }
57
58 # ifn_stop ifn
59 #       Shutdown and de-configure an interface.  If action is taken,
60 #       print the interface name.
61 #
62 ifn_stop()
63 {
64         local ifn cfg
65         ifn="$1"
66         cfg=1
67
68         [ -z "$ifn" ] && err 1 "ifn_stop called without an interface"
69
70         if ! noafif $ifn; then
71                 afexists inet6 && ipv6_down ${ifn} && cfg=0
72                 afexists inet && ipv4_down ${ifn} && cfg=0
73         fi
74         ifconfig_down ${ifn} && cfg=0
75         ifscript_down ${ifn} && cfg=0
76         childif_destroy ${ifn} && cfg=0
77
78         return $cfg
79 }
80
81 # ifn_vnetup ifn
82 #       Move ifn to the specified vnet jail.
83 #
84 ifn_vnetup()
85 {
86
87         ifn_vnet0 $1 vnet
88 }
89
90 # ifn_vnetdown ifn
91 #       Reclaim ifn from the specified vnet jail.
92 #
93 ifn_vnetdown()
94 {
95
96         ifn_vnet0 $1 -vnet
97 }
98
99 # ifn_vnet0 ifn action
100 #       Helper function for ifn_vnetup and ifn_vnetdown.
101 #
102 ifn_vnet0()
103 {
104         local _ifn _cfg _action _vnet
105         _ifn="$1"
106         _action="$2"
107         _cfg=1
108
109         if _vnet=$(vnetif $_ifn); then
110                 ${IFCONFIG_CMD} $_ifn $_action $_vnet && _cfg=0
111         fi
112
113         return $_cfg
114 }
115
116 # ifconfig_up if
117 #       Evaluate ifconfig(8) arguments for interface $if and
118 #       run ifconfig(8) with those arguments. It returns 0 if
119 #       arguments were found and executed or 1 if the interface
120 #       had no arguments.  Pseudo arguments DHCP and WPA are handled
121 #       here.
122 #
123 ifconfig_up()
124 {
125         local _cfg _ifconfig_descr _ipv6_opts ifconfig_args 
126         _cfg=1
127
128         # Make sure lo0 always comes up.
129         if [ "$1" = "lo0" ]; then
130                 _cfg=0
131         fi
132
133         # inet6 specific
134         if ! noafif $1 && afexists inet6; then
135                 if checkyesno ipv6_activate_all_interfaces; then
136                         _ipv6_opts="-ifdisabled"
137                 elif [ "$1" != "lo0" ]; then
138                         _ipv6_opts="ifdisabled"
139                 fi
140
141                 # backward compatibility: $ipv6_enable
142                 case $ipv6_enable in
143                 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
144                         case $1 in
145                         bridge[0-9]*)
146                                 # No accept_rtadv by default on if_bridge(4)
147                                 # to avoid a conflict with the member
148                                 # interfaces.
149                         ;;
150                         *)
151                                 if ! checkyesno ipv6_gateway_enable; then
152                                         _ipv6_opts="${_ipv6_opts} accept_rtadv"
153                                 fi
154                         ;;
155                         esac
156                 ;;
157                 esac
158
159                 case $ipv6_cpe_wanif in
160                 $1)
161                         _ipv6_opts="${_ipv6_opts} -no_radr accept_rtadv"
162                 ;;
163                 esac
164
165                 if [ -n "${_ipv6_opts}" ]; then
166                         ${IFCONFIG_CMD} $1 inet6 ${_ipv6_opts}
167                 fi
168         fi
169
170         # ifconfig_IF
171         ifconfig_args=`ifconfig_getargs $1`
172         if [ -n "${ifconfig_args}" ]; then
173                 eval ${IFCONFIG_CMD} $1 ${ifconfig_args}
174                 _cfg=0
175         fi
176
177         # inet6 specific
178         if ! noafif $1 && afexists inet6; then
179                 # ifconfig_IF_ipv6
180                 ifconfig_args=`ifconfig_getargs $1 ipv6`
181                 if [ -n "${ifconfig_args}" ]; then
182                         # backward compatibility: inet6 keyword
183                         case "${ifconfig_args}" in
184                         :*|[0-9a-fA-F]*:*)
185                                 warn "\$ifconfig_$1_ipv6 needs leading" \
186                                     "\"inet6\" keyword for an IPv6 address."
187                                 ifconfig_args="inet6 ${ifconfig_args}"
188                         ;;
189                         esac
190                         ${IFCONFIG_CMD} $1 inet6 -ifdisabled
191                         eval ${IFCONFIG_CMD} $1 ${ifconfig_args}
192                         _cfg=0
193                 fi
194
195                 # $ipv6_prefix_IF will be handled in
196                 # ipv6_prefix_hostid_addr_common().
197                 ifconfig_args=`get_if_var $1 ipv6_prefix_IF`
198                 if [ -n "${ifconfig_args}" ]; then
199                         ${IFCONFIG_CMD} $1 inet6 -ifdisabled
200                         _cfg=0
201                 fi
202
203                 # backward compatibility: $ipv6_ifconfig_IF
204                 ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF`
205                 if [ -n "${ifconfig_args}" ]; then
206                         warn "\$ipv6_ifconfig_$1 is obsolete." \
207                             "  Use ifconfig_$1_ipv6 instead."
208                         ${IFCONFIG_CMD} $1 inet6 -ifdisabled
209                         eval ${IFCONFIG_CMD} $1 inet6 ${ifconfig_args}
210                         _cfg=0
211                 fi
212         fi
213
214         ifalias $1 link alias
215         ifalias $1 ether alias
216
217         _ifconfig_descr=`get_if_var $1 ifconfig_IF_descr`
218         if [ -n "${_ifconfig_descr}" ]; then
219                 ${IFCONFIG_CMD} $1 description "${_ifconfig_descr}"
220         fi
221
222         if wpaif $1; then
223                 /etc/rc.d/wpa_supplicant start $1
224                 _cfg=0          # XXX: not sure this should count
225         elif hostapif $1; then
226                 /etc/rc.d/hostapd start $1
227                 _cfg=0
228         elif [ ${_cfg} -eq 0 ]; then
229                 ${IFCONFIG_CMD} $1 up
230         fi
231
232         if ! noafif $1 && afexists inet6; then
233                 ipv6_accept_rtadv_up $1 && _cfg=0
234         fi
235
236         if dhcpif $1; then
237                 if [ $_cfg -ne 0 ] ; then
238                         ${IFCONFIG_CMD} $1 up
239                 fi
240                 if syncdhcpif $1; then
241                         /etc/rc.d/dhclient start $1
242                 fi
243                 _cfg=0
244         fi
245
246         return $_cfg
247 }
248
249 # ifconfig_down if
250 #       returns 1 if wpa_supplicant or dhclient was stopped or
251 #       the interface exists.
252 #
253 ifconfig_down()
254 {
255         local _cfg
256         _cfg=1
257
258         if wpaif $1; then
259                 /etc/rc.d/wpa_supplicant stop $1
260                 _cfg=0
261         elif hostapif $1; then
262                 /etc/rc.d/hostapd stop $1
263                 _cfg=0
264         elif dhcpif $1; then
265                 /etc/rc.d/dhclient stop $1
266                 _cfg=0
267         fi
268
269         if ifexists $1; then
270                 ${IFCONFIG_CMD} $1 down
271                 _cfg=0
272         fi
273
274         return $_cfg
275 }
276
277 # get_if_var if var [default]
278 #       Return the value of the pseudo-hash corresponding to $if where
279 #       $var is a string containg the sub-string "IF" which will be
280 #       replaced with $if after the characters defined in _punct are
281 #       replaced with '_'. If the variable is unset, replace it with
282 #       $default if given.
283 get_if_var()
284 {
285         local _if _punct _punct_c _var _default prefix suffix
286
287         if [ $# -ne 2 -a $# -ne 3 ]; then
288                 err 3 'USAGE: get_if_var name var [default]'
289         fi
290
291         _if=$1
292         _punct=".-/+"
293         ltr ${_if} "${_punct}" '_' _if
294         _var=$2
295         _default=$3
296
297         prefix=${_var%%IF*}
298         suffix=${_var##*IF}
299         eval echo \${${prefix}${_if}${suffix}-${_default}}
300 }
301
302 # _ifconfig_getargs if [af]
303 #       Prints the arguments for the supplied interface to stdout.
304 #       Returns 1 if empty.  In general, ifconfig_getargs should be used
305 #       outside this file.
306 _ifconfig_getargs()
307 {
308         local _ifn _af
309         _ifn=$1
310         _af=${2+_$2}
311
312         if [ -z "$_ifn" ]; then
313                 return 1
314         fi
315
316         get_if_var $_ifn ifconfig_IF$_af "$ifconfig_DEFAULT"
317 }
318
319 # ifconfig_getargs if [af]
320 #       Takes the result from _ifconfig_getargs and removes pseudo
321 #       args such as DHCP and WPA.
322 ifconfig_getargs()
323 {
324         local _tmpargs _arg _args _vnet
325         _tmpargs=`_ifconfig_getargs $1 $2`
326         if [ $? -eq 1 ]; then
327                 return 1
328         fi
329         _args=
330         _vnet=0
331
332         for _arg in $_tmpargs; do
333                 case $_arg:$_vnet in
334                 [Dd][Hh][Cc][Pp]:0) ;;
335                 [Nn][Oo][Aa][Uu][Tt][Oo]:0) ;;
336                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]:0) ;;
337                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]:0) ;;
338                 [Ww][Pp][Aa]:0) ;;
339                 [Hh][Oo][Ss][Tt][Aa][Pp]:0) ;;
340                 vnet:0) _vnet=1 ;;
341                 *:1)    _vnet=0 ;;
342                 *:0)
343                         _args="$_args $_arg"
344                 ;;
345                 esac
346         done
347
348         echo $_args
349 }
350
351 # autoif
352 #       Returns 0 if the interface should be automatically configured at
353 #       boot time and 1 otherwise.
354 autoif()
355 {
356         local _tmpargs _arg
357         _tmpargs=`_ifconfig_getargs $1`
358
359         for _arg in $_tmpargs; do
360                 case $_arg in
361                 [Nn][Oo][Aa][Uu][Tt][Oo])
362                         return 1
363                         ;;
364                 esac
365         done
366
367         return 0
368 }
369
370 # dhcpif if
371 #       Returns 0 if the interface is a DHCP interface and 1 otherwise.
372 dhcpif()
373 {
374         local _tmpargs _arg
375         _tmpargs=`_ifconfig_getargs $1`
376
377         case $1 in
378         lo[0-9]*|\
379         stf[0-9]*|\
380         lp[0-9]*|\
381         sl[0-9]*)
382                 return 1
383                 ;;
384         esac
385         if noafif $1; then
386                 return 1
387         fi
388
389         for _arg in $_tmpargs; do
390                 case $_arg in
391                 [Dd][Hh][Cc][Pp])
392                         return 0
393                         ;;
394                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
395                         return 0
396                         ;;
397                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
398                         return 0
399                         ;;
400                 esac
401         done
402
403         return 1
404 }
405
406 # syncdhcpif
407 #       Returns 0 if the interface should be configured synchronously and
408 #       1 otherwise.
409 syncdhcpif()
410 {
411         local _tmpargs _arg
412         _tmpargs=`_ifconfig_getargs $1`
413
414         if noafif $1; then
415                 return 1
416         fi
417
418         for _arg in $_tmpargs; do
419                 case $_arg in
420                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
421                         return 1
422                         ;;
423                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
424                         return 0
425                         ;;
426                 esac
427         done
428
429         checkyesno synchronous_dhclient
430 }
431
432 # wpaif if
433 #       Returns 0 if the interface is a WPA interface and 1 otherwise.
434 wpaif()
435 {
436         local _tmpargs _arg
437         _tmpargs=`_ifconfig_getargs $1`
438
439         for _arg in $_tmpargs; do
440                 case $_arg in
441                 [Ww][Pp][Aa])
442                         return 0
443                         ;;
444                 esac
445         done
446
447         return 1
448 }
449
450 # hostapif if
451 #       Returns 0 if the interface is a HOSTAP interface and 1 otherwise.
452 hostapif()
453 {
454         local _tmpargs _arg
455         _tmpargs=`_ifconfig_getargs $1`
456
457         for _arg in $_tmpargs; do
458                 case $_arg in
459                 [Hh][Oo][Ss][Tt][Aa][Pp])
460                         return 0
461                         ;;
462                 esac
463         done
464
465         return 1
466 }
467
468 # vnetif if
469 #       Returns 0 and echo jail if "vnet" keyword is specified on the
470 #       interface, and 1 otherwise.
471 vnetif()
472 {
473         local _tmpargs _arg _vnet
474         _tmpargs=`_ifconfig_getargs $1`
475
476         _vnet=0
477         for _arg in $_tmpargs; do
478                 case $_arg:$_vnet in
479                 vnet:0) _vnet=1 ;;
480                 *:1)    echo $_arg; return 0 ;;
481                 esac
482         done
483
484         return 1
485 }
486
487 # afexists af
488 #       Returns 0 if the address family is enabled in the kernel
489 #       1 otherwise.
490 afexists()
491 {
492         local _af
493         _af=$1
494
495         case ${_af} in
496         inet|inet6)
497                 check_kern_features ${_af}
498                 ;;
499         link|ether)
500                 return 0
501                 ;;
502         *)
503                 err 1 "afexists(): Unsupported address family: $_af"
504                 ;;
505         esac
506 }
507
508 # noafif if
509 #       Returns 0 if the interface has no af configuration and 1 otherwise.
510 noafif()
511 {
512         local _if
513         _if=$1
514
515         case $_if in
516         pflog[0-9]*|\
517         pfsync[0-9]*|\
518         usbus[0-9]*|\
519         an[0-9]*|\
520         ath[0-9]*|\
521         ipw[0-9]*|\
522         ipfw[0-9]*|\
523         iwi[0-9]*|\
524         iwn[0-9]*|\
525         ral[0-9]*|\
526         wi[0-9]*|\
527         wl[0-9]*|\
528         wpi[0-9]*)
529                 return 0
530                 ;;
531         esac
532
533         return 1
534 }
535
536 # ipv6if if
537 #       Returns 0 if the interface should be configured for IPv6 and
538 #       1 otherwise.
539 ipv6if()
540 {
541         local _if _tmpargs i
542         _if=$1
543
544         if ! afexists inet6; then
545                 return 1
546         fi
547
548         # lo0 is always IPv6-enabled
549         case $_if in
550         lo0)
551                 return 0
552                 ;;
553         esac
554
555         case "${ipv6_network_interfaces}" in
556         $_if|"$_if "*|*" $_if"|*" $_if "*|[Aa][Uu][Tt][Oo])
557                 # True if $ifconfig_IF_ipv6 is defined.
558                 _tmpargs=`_ifconfig_getargs $_if ipv6`
559                 if [ -n "${_tmpargs}" ]; then
560                         return 0
561                 fi
562
563                 # True if $ipv6_prefix_IF is defined.
564                 _tmpargs=`get_if_var $_if ipv6_prefix_IF`
565                 if [ -n "${_tmpargs}" ]; then
566                         return 0
567                 fi
568
569                 # backward compatibility: True if $ipv6_ifconfig_IF is defined.
570                 _tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
571                 if [ -n "${_tmpargs}" ]; then
572                         return 0
573                 fi
574                 ;;
575         esac
576
577         return 1
578 }
579
580 # ipv6_autoconfif if
581 #       Returns 0 if the interface should be configured for IPv6 with
582 #       Stateless Address Configuration; 1 otherwise.
583 ipv6_autoconfif()
584 {
585         local _if _tmpargs _arg
586         _if=$1
587
588         case $_if in
589         lo[0-9]*|\
590         stf[0-9]*|\
591         lp[0-9]*|\
592         sl[0-9]*)
593                 return 1
594                 ;;
595         esac
596         if noafif $_if; then
597                 return 1
598         fi
599         if ! ipv6if $_if; then
600                 return 1
601         fi
602         if checkyesno ipv6_gateway_enable; then
603                 return 1
604         fi
605         _tmpargs=`get_if_var $_if ipv6_prefix_IF`
606         if [ -n "${_tmpargs}" ]; then
607                 return 1
608         fi
609         # backward compatibility: $ipv6_enable
610         case $ipv6_enable in
611         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
612                 if checkyesno ipv6_gateway_enable; then
613                         return 1
614                 fi
615                 case $1 in
616                 bridge[0-9]*)
617                         # No accept_rtadv by default on if_bridge(4)
618                         # to avoid a conflict with the member
619                         # interfaces.
620                         return 1
621                 ;;
622                 *)
623                         return 0
624                 ;;
625                 esac
626         ;;
627         esac
628
629         _tmpargs=`_ifconfig_getargs $_if ipv6`
630         for _arg in $_tmpargs; do
631                 case $_arg in
632                 accept_rtadv)
633                         return 0
634                         ;;
635                 esac
636         done
637
638         # backward compatibility: $ipv6_ifconfig_IF
639         _tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
640         for _arg in $_tmpargs; do
641                 case $_arg in
642                 accept_rtadv)
643                         return 0
644                         ;;
645                 esac
646         done
647
648         return 1
649 }
650
651 # ifexists if
652 #       Returns 0 if the interface exists and 1 otherwise.
653 ifexists()
654 {
655         [ -z "$1" ] && return 1
656         ${IFCONFIG_CMD} -n $1 > /dev/null 2>&1
657 }
658
659 # ipv4_up if
660 #       add IPv4 addresses to the interface $if
661 ipv4_up()
662 {
663         local _if _ret
664         _if=$1
665         _ret=1
666
667         # Add 127.0.0.1/8 to lo0 unless otherwise specified.
668         if [ "${_if}" = "lo0" ]; then
669                 ifconfig_args=`get_if_var ${_if} ifconfig_IF`
670                 if [ -z "${ifconfig_args}" ]; then
671                         ${IFCONFIG_CMD} ${_if} inet 127.0.0.1/8 alias
672                 fi
673         fi
674         ifalias ${_if} inet alias && _ret=0
675
676         return $_ret
677 }
678
679 # ipv6_up if
680 #       add IPv6 addresses to the interface $if
681 ipv6_up()
682 {
683         local _if _ret
684         _if=$1
685         _ret=1
686
687         if ! ipv6if $_if; then
688                 return 0
689         fi
690
691         ifalias ${_if} inet6 alias && _ret=0
692         ipv6_prefix_hostid_addr_common ${_if} alias && _ret=0
693
694         return $_ret
695 }
696
697 # ipv4_down if
698 #       remove IPv4 addresses from the interface $if
699 ipv4_down()
700 {
701         local _if _ifs _ret inetList oldifs _inet
702         _if=$1
703         _ifs="^"
704         _ret=1
705
706         ifalias ${_if} inet -alias && _ret=0
707
708         inetList="`${IFCONFIG_CMD} ${_if} | grep 'inet ' | tr "\n\t" "$_ifs"`"
709
710         oldifs="$IFS"
711         IFS="$_ifs"
712         for _inet in $inetList ; do
713                 # get rid of extraneous line
714                 case $_inet in
715                 inet\ *)        ;;
716                 *)              continue ;;
717                 esac
718
719                 _inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
720
721                 IFS="$oldifs"
722                 ${IFCONFIG_CMD} ${_if} ${_inet} delete
723                 IFS="$_ifs"
724                 _ret=0
725         done
726         IFS="$oldifs"
727
728         return $_ret
729 }
730
731 # ipv6_down if
732 #       remove IPv6 addresses from the interface $if
733 ipv6_down()
734 {
735         local _if _ifs _ret inetList oldifs _inet6
736         _if=$1
737         _ifs="^"
738         _ret=1
739
740         if ! ipv6if $_if; then
741                 return 0
742         fi
743
744         ipv6_accept_rtadv_down ${_if} && _ret=0
745         ipv6_prefix_hostid_addr_common ${_if} -alias && _ret=0
746         ifalias ${_if} inet6 -alias && _ret=0
747
748         inetList="`${IFCONFIG_CMD} ${_if} | grep 'inet6 ' | tr "\n\t" "$_ifs"`"
749
750         oldifs="$IFS"
751         IFS="$_ifs"
752         for _inet6 in $inetList ; do
753                 # get rid of extraneous line
754                 case $_inet6 in
755                 inet6\ *)       ;;
756                 *)              continue ;;
757                 esac
758
759                 _inet6=`expr "$_inet6" : '.*\(inet6 \([0-9a-f:]*\)\).*'`
760
761                 IFS="$oldifs"
762                 ${IFCONFIG_CMD} ${_if} ${_inet6} -alias
763                 IFS="$_ifs"
764                 _ret=0
765         done
766         IFS="$oldifs"
767
768         return $_ret
769 }
770
771 # ifalias if af action
772 #       Configure or remove aliases for network interface $if.
773 #       It returns 0 if at least one alias was configured or
774 #       removed, or 1 if there were none.
775 #
776 ifalias()
777 {
778         local _ret
779         _ret=1
780
781         afexists $2 || return $_ret
782
783         case "$2" in
784         inet|inet6|link|ether)
785                 ifalias_af_common $1 $2 $3 && _ret=0
786                 ;;
787         esac
788
789         return $_ret
790 }
791
792 # ifalias_expand_addr af action addr
793 #       Expand address range ("N-M") specification in addr.
794 #       "addr" must not include an address-family keyword.
795 #       The results will include an address-family keyword.
796 #
797 ifalias_expand_addr()
798 {
799         local _af _action
800
801         _af=$1
802         _action=$2
803         shift 2
804
805         afexists $_af || return
806         ifalias_expand_addr_$_af $_action $*
807 }
808
809 # ifalias_expand_addr_inet action addr
810 #       Helper function for ifalias_expand_addr().  Handles IPv4.
811 #
812 ifalias_expand_addr_inet()
813 {
814         local _action _arg _cidr _cidr_addr _exargs
815         local _ipaddr _plen _range _iphead _iptail _iplow _iphigh _ipcount
816         local _retstr _c
817         _action=$1
818         _arg=$2
819         shift 2
820         _exargs=$*
821         _retstr=
822
823         case $_action:$_arg:$_exargs in
824         *:*--*)         return ;;       # invalid
825         tmp:*[0-9]-[0-9]*:*)            # to be expanded
826                 _action="alias"
827         ;;
828         *:*[0-9]-[0-9]*:*)              # to be expanded
829         ;;
830         tmp:*:*netmask*)                # already expanded w/ netmask option
831                 echo ${_arg%/[0-9]*} $_exargs && return
832         ;;
833         tmp:*:*)                        # already expanded w/o netmask option
834                 echo $_arg $_exargs && return
835         ;;
836         *:*:*netmask*)                  # already expanded w/ netmask option
837                 echo inet ${_arg%/[0-9]*} $_exargs && return
838         ;;
839         *:*:*)                          # already expanded w/o netmask option
840                 echo inet $_arg $_exargs && return
841         ;;
842         esac
843
844         for _cidr in $_arg; do
845                 _ipaddr=${_cidr%%/*}
846                 _plen=${_cidr##*/}
847                 # When subnet prefix length is not specified, use /32.
848                 case $_plen in
849                 $_ipaddr)       _plen=32 ;;     # "/" character not found
850                 esac
851
852                 OIFS=$IFS
853                 IFS=. set -- $_ipaddr
854                 _range=
855                 _iphead=
856                 _iptail=
857                 for _c in $@; do
858                         case $_range:$_c in
859                         :[0-9]*-[0-9]*)
860                                 _range=$_c
861                         ;;
862                         :*)
863                                 _iphead="${_iphead}${_iphead:+.}${_c}"
864                         ;;
865                         *:*)
866                                 _iptail="${_iptail}${_iptail:+.}${_c}"
867                         ;;
868                         esac
869                 done
870                 IFS=$OIFS
871                 _iplow=${_range%-*}
872                 _iphigh=${_range#*-}
873
874                 # clear netmask when removing aliases
875                 if [ "$_action" = "-alias" ]; then
876                         _plen=""
877                 fi
878
879                 _ipcount=$_iplow
880                 while [ "$_ipcount" -le "$_iphigh" ]; do
881                         _retstr="${_retstr} ${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail}${_plen:+/}${_plen}"
882                         if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]; then
883                                 warn "Range specification is too large (${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_iphigh}${_iptail:+.}${_iptail}).  ${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail} was processed.  Increase \$netif_ipexpand_max in rc.conf."
884                                 break
885                         else
886                                 _ipcount=$(($_ipcount + 1))
887                         fi
888                         # Forcibly set /32 for remaining aliases.
889                         _plen=32
890                 done
891         done
892
893         for _c in $_retstr; do
894                 ifalias_expand_addr_inet $_action $_c $_exargs
895         done
896 }
897
898 # ifalias_expand_addr_inet6 action addr
899 #       Helper function for ifalias_expand_addr().  Handles IPv6.
900 #
901 ifalias_expand_addr_inet6()
902 {
903         local _action _arg _cidr _cidr_addr _exargs
904         local _ipaddr _plen _ipleft _ipright _iplow _iphigh _ipcount
905         local _ipv4part
906         local _retstr _c
907         _action=$1
908         _arg=$2
909         shift 2
910         _exargs=$*
911         _retstr=
912
913         case $_action:$_arg:$_exargs in
914         *:*--*:*)       return ;;       # invalid
915         tmp:*[0-9a-zA-Z]-[0-9a-zA-Z]*:*)# to be expanded
916                 _action="alias"
917         ;;
918         *:*[0-9a-zA-Z]-[0-9a-zA-Z]*:*)  # to be expanded
919         ;;
920         tmp:*:*prefixlen*)      # already expanded w/ prefixlen option
921                 echo ${_arg%/[0-9]*} $_exargs && return
922         ;;
923         tmp:*:*)                # already expanded w/o prefixlen option
924                 echo $_arg $_exargs && return
925         ;;
926         *:*:*prefixlen*)        # already expanded w/ prefixlen option
927                 echo inet6 ${_arg%/[0-9]*} $_exargs && return
928         ;;
929         *:*:*)                  # already expanded w/o prefixlen option
930                 echo inet6 $_arg $_exargs && return
931         ;;
932         esac
933
934         for _cidr in $_arg; do
935                 _ipaddr="${_cidr%%/*}"
936                 _plen="${_cidr##*/}"
937
938                 case $_action:$_ipaddr:$_cidr in
939                 -alias:*:*)             unset _plen ;;
940                 *:$_cidr:$_ipaddr)      unset _plen ;;
941                 esac
942
943                 if [ "${_ipaddr%:*.*.*.*}" = "$_ipaddr" ]; then
944                         # Handle !v4mapped && !v4compat addresses.
945
946                         # The default prefix length is 64.
947                         case $_ipaddr:$_cidr in
948                         $_cidr:$_ipaddr)        _plen="64" ;;
949                         esac
950                         _ipleft=${_ipaddr%-*}
951                         _ipright=${_ipaddr#*-}
952                         _iplow=${_ipleft##*:}
953                         _iphigh=${_ipright%%:*}
954                         _ipleft=${_ipleft%:*}
955                         _ipright=${_ipright#*:}
956
957                         if [ "$_iphigh" = "$_ipright" ]; then
958                                 unset _ipright
959                         else
960                                 _ipright=:$_ipright
961                         fi
962
963                         if [ -n "$_iplow" -a -n "$_iphigh" ]; then
964                                 _iplow=$((0x$_iplow))
965                                 _iphigh=$((0x$_iphigh))
966                                 _ipcount=$_iplow
967                                 while [ $_ipcount -le $_iphigh ]; do
968                                         _r=`printf "%s:%04x%s%s" \
969                                             $_ipleft $_ipcount $_ipright \
970                                             ${_plen:+/}$_plen`
971                                         _retstr="$_retstr $_r"
972                                         if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]
973                                         then
974                                                 warn "Range specification is too large $(printf '(%s:%x%s-%s:%x%s)' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_iphigh" "$_ipright"). $(printf '%s:%x%s-%s:%x%s' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_ipcount" "$_ipright") was processed.  Increase \$netif_ipexpand_max in rc.conf."
975                                                 break
976                                         else
977                                                 _ipcount=$(($_ipcount + 1))
978                                         fi
979                                 done
980                         else
981                                 _retstr="${_ipaddr}${_plen:+/}${_plen}"
982                         fi
983
984                         for _c in $_retstr; do
985                                 ifalias_expand_addr_inet6 $_action $_c $_exargs
986                         done
987                 else
988                         # v4mapped/v4compat should handle as an IPv4 alias
989                         _ipv4part=${_ipaddr##*:}
990
991                         # Adjust prefix length if any.  If not, set the
992                         # default prefix length as 32.
993                         case $_ipaddr:$_cidr in
994                         $_cidr:$_ipaddr)        _plen=32 ;;
995                         *)                      _plen=$(($_plen - 96)) ;;
996                         esac
997
998                         _retstr=`ifalias_expand_addr_inet \
999                             tmp ${_ipv4part}${_plen:+/}${_plen}`
1000                         for _c in $_retstr; do
1001                                 ifalias_expand_addr_inet $_action $_c $_exargs
1002                         done
1003                 fi
1004         done
1005 }
1006
1007 # ifalias_af_common_handler if af action args
1008 #       Helper function for ifalias_af_common().
1009 #
1010 ifalias_af_common_handler()
1011 {
1012         local _ret _if _af _action _args _c _tmpargs
1013
1014         _ret=1
1015         _if=$1
1016         _af=$2
1017         _action=$3
1018         shift 3
1019         _args=$*
1020
1021         case $_args in
1022         ${_af}\ *)      ;;
1023         *)      return  ;;
1024         esac
1025
1026         # link(ether) does not support address removal.
1027         case $_af:$_action in
1028         link:-alias|ether:-alias)       return ;;
1029         esac
1030
1031         _tmpargs=
1032         for _c in $_args; do
1033                 case $_c in
1034                 ${_af})
1035                         case $_tmpargs in
1036                         ${_af}\ *[0-9a-fA-F]-*)
1037                                 ifalias_af_common_handler $_if $_af $_action \
1038                                 `ifalias_expand_addr $_af $_action ${_tmpargs#${_af}\ }`
1039                         ;;
1040                         ${_af}\ *)
1041                                 ${IFCONFIG_CMD} $_if $_tmpargs $_action && _ret=0
1042                         ;;
1043                         esac
1044                         _tmpargs=$_af
1045                 ;;
1046                 *)
1047                         _tmpargs="$_tmpargs $_c"
1048                 ;;
1049                 esac
1050         done
1051         # Process the last component if any.
1052         if [ -n "$_tmpargs}" ]; then
1053                 case $_tmpargs in
1054                 ${_af}\ *[0-9a-fA-F]-*)
1055                         ifalias_af_common_handler $_if $_af $_action \
1056                         `ifalias_expand_addr $_af $_action ${_tmpargs#${_af}\ }`
1057                 ;;
1058                 ${_af}\ *)
1059                         ${IFCONFIG_CMD} $_if $_tmpargs $_action && _ret=0
1060                 ;;
1061                 esac
1062         fi
1063
1064         return $_ret
1065 }
1066
1067 # ifalias_af_common if af action
1068 #       Helper function for ifalias().
1069 #
1070 ifalias_af_common()
1071 {
1072         local _ret _if _af _action alias ifconfig_args _aliasn _c _tmpargs _iaf
1073         local _vif _punct=".-/+"
1074
1075         _ret=1
1076         _aliasn=
1077         _if=$1
1078         _af=$2
1079         _action=$3
1080
1081         # Normalize $_if before using it in a pattern to list_vars()
1082         ltr "$_if" "$_punct" "_" _vif
1083
1084         # ifconfig_IF_aliasN which starts with $_af
1085         for alias in `list_vars ifconfig_${_vif}_alias[0-9]\* |
1086                 sort_lite -nk1.$((9+${#_vif}+7))`
1087         do
1088                 eval ifconfig_args=\"\$$alias\"
1089                 _iaf=
1090                 case $ifconfig_args in
1091                 inet\ *)        _iaf=inet ;;
1092                 inet6\ *)       _iaf=inet6 ;;
1093                 link\ *)        _iaf=link ;;
1094                 ether\ *)       _iaf=ether ;;
1095                 esac
1096
1097                 case ${_af}:${_action}:${_iaf}:"${ifconfig_args}" in
1098                 ${_af}:*:${_af}:*)
1099                         _aliasn="$_aliasn $ifconfig_args"
1100                         ;;
1101                 ${_af}:*:"":"")
1102                         break
1103                         ;;
1104                 inet:alias:"":*)
1105                         _aliasn="$_aliasn inet $ifconfig_args"
1106                         warn "\$${alias} needs leading" \
1107                             "\"inet\" keyword for an IPv4 address."
1108                 esac
1109         done
1110
1111         # backward compatibility: ipv6_ifconfig_IF_aliasN.
1112         case $_af in
1113         inet6)
1114                 for alias in `list_vars ipv6_ifconfig_${_vif}_alias[0-9]\* |
1115                         sort_lite -nk1.$((14+${#_vif}+7))`
1116                 do
1117                         eval ifconfig_args=\"\$$alias\"
1118                         case ${_action}:"${ifconfig_args}" in
1119                         *:"")
1120                                 break
1121                         ;;
1122                         alias:*)
1123                                 _aliasn="${_aliasn} inet6 ${ifconfig_args}"
1124                                 warn "\$${alias} is obsolete. " \
1125                                     "Use ifconfig_${_vif}_aliasN instead."
1126                         ;;
1127                         esac
1128                 done
1129         esac
1130
1131         # backward compatibility: ipv4_addrs_IF.
1132         for _tmpargs in `get_if_var $_if ipv4_addrs_IF`; do
1133                 _aliasn="$_aliasn inet $_tmpargs"
1134         done
1135
1136         # Handle ifconfig_IF_aliases, ifconfig_IF_aliasN, and the others.
1137         _tmpargs=
1138         for _c in `get_if_var $_if ifconfig_IF_aliases` $_aliasn; do
1139                 case $_c in
1140                 inet|inet6|link|ether)
1141                         case $_tmpargs in
1142                         ${_af}\ *)
1143                                 eval ifalias_af_common_handler $_if $_af $_action $_tmpargs && _ret=0
1144                         ;;
1145                         esac
1146                         _tmpargs=$_c
1147                 ;;
1148                 *)
1149                         _tmpargs="$_tmpargs $_c"
1150                 esac
1151         done
1152         # Process the last component
1153         case $_tmpargs in
1154         ${_af}\ *)
1155                 ifalias_af_common_handler $_if $_af $_action $_tmpargs && _ret=0
1156         ;;
1157         esac
1158
1159         return $_ret
1160 }
1161
1162 # ipv6_prefix_hostid_addr_common if action
1163 #       Add or remove IPv6 prefix + hostid addr on the interface $if
1164 #
1165 ipv6_prefix_hostid_addr_common()
1166 {
1167         local _if _action prefix j
1168         _if=$1
1169         _action=$2
1170         prefix=`get_if_var ${_if} ipv6_prefix_IF`
1171
1172         if [ -n "${prefix}" ]; then
1173                 for j in ${prefix}; do
1174                         # The default prefixlen is 64.
1175                         plen=${j#*/}
1176                         case $j:$plen in
1177                         $plen:$j)       plen=64 ;;
1178                         *)              j=${j%/*} ;;
1179                         esac
1180
1181                         # Normalize the last part by removing ":"
1182                         j=${j%::*}
1183                         j=${j%:}
1184                         ${IFCONFIG_CMD} ${_if} inet6 $j:: \
1185                                 prefixlen $plen eui64 ${_action}
1186
1187                         # if I am a router, add subnet router
1188                         # anycast address (RFC 2373).
1189                         if checkyesno ipv6_gateway_enable; then
1190                                 ${IFCONFIG_CMD} ${_if} inet6 $j:: \
1191                                         prefixlen $plen ${_action} anycast
1192                         fi
1193                 done
1194         fi
1195 }
1196
1197 # ipv6_accept_rtadv_up if
1198 #       Enable accepting Router Advertisement and send Router
1199 #       Solicitation message
1200 ipv6_accept_rtadv_up()
1201 {
1202         if ipv6_autoconfif $1; then
1203                 ${IFCONFIG_CMD} $1 inet6 accept_rtadv up
1204                 if [ -x /sbin/rtsol ]; then
1205                         /sbin/rtsol ${rtsol_flags} $1
1206                 fi
1207                 return 0
1208         fi
1209         return 1
1210 }
1211
1212 # ipv6_accept_rtadv_down if
1213 #       Disable accepting Router Advertisement
1214 ipv6_accept_rtadv_down()
1215 {
1216         if ipv6_autoconfif $1; then
1217                 ${IFCONFIG_CMD} $1 inet6 -accept_rtadv
1218         fi
1219 }
1220
1221 # ifscript_up if
1222 #       Evaluate a startup script for the $if interface.
1223 #       It returns 0 if a script was found and processed or
1224 #       1 if no script was found.
1225 #
1226 ifscript_up()
1227 {
1228         if [ -r /etc/start_if.$1 ]; then
1229                 . /etc/start_if.$1
1230                 return 0
1231         else
1232                 return 1
1233         fi
1234 }
1235
1236 # ifscript_down if
1237 #       Evaluate a shutdown script for the $if interface.
1238 #       It returns 0 if a script was found and processed or
1239 #       1 if no script was found.
1240 #
1241 ifscript_down()
1242 {
1243         if [ -r /etc/stop_if.$1 ]; then
1244                 . /etc/stop_if.$1
1245                 return 0
1246         else
1247                 return 1
1248         fi
1249 }
1250
1251 # wlan_up
1252 #       Create IEEE802.11 interfaces.
1253 #
1254 wlan_up()
1255 {
1256         local _list _iflist parent child_wlans child create_args debug_flags
1257         _list=
1258         _iflist=$*
1259
1260         # Parse wlans_$parent="$child ..."
1261         for parent in `set | sed -nE 's/wlans_([a-z]+[0-9]+)=.*/\1/p'`; do
1262                 child_wlans=`get_if_var $parent wlans_IF`
1263                 for child in ${child_wlans}; do
1264                         create_args="wlandev $parent `get_if_var $child create_args_IF`"
1265                         debug_flags="`get_if_var $child wlandebug_IF`"
1266                         case $_iflist in
1267                         ""|$child|$child\ *|*\ $child\ *|*\ $child)     ;;
1268                         *)      continue ;;
1269                         esac
1270                         # Skip if ${child} already exists.
1271                         if ${IFCONFIG_CMD} $child > /dev/null 2>&1; then
1272                                 continue
1273                         fi
1274                         if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
1275                                 ${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1276                         else
1277                                 ${IFCONFIG_CMD} wlan create ${create_args} name $child && cfg=0
1278                         fi
1279                         if [ $? -eq 0 ]; then
1280                                 _list="$_list $child"
1281                         fi
1282                         if [ -n "${debug_flags}" ]; then
1283                                 wlandebug -i $child ${debug_flags}
1284                         fi
1285                 done
1286         done
1287         if [ -n "${_list# }" ]; then
1288                 echo "Created wlan(4) interfaces: ${_list# }."
1289         fi
1290         debug "Created wlan(4)s: ${_list# }"
1291 }
1292
1293 # wlan_down
1294 #       Destroy IEEE802.11 interfaces.
1295 #
1296 wlan_down()
1297 {
1298         local _list _iflist parent child_wlans child
1299         _list=
1300         _iflist=$*
1301
1302         # Parse wlans_$parent="$child ..."
1303         for parent in `set | sed -nE 's/wlans_([a-z]+[0-9]+)=.*/\1/p'`; do
1304                 child_wlans=`get_if_var $parent wlans_IF`
1305                 for child in ${child_wlans}; do
1306                         case $_iflist in
1307                         ""|$child|$child\ *|*\ $child\ *|*\ $child)     ;;
1308                         *)      continue ;;
1309                         esac
1310                         # Skip if ${child} doesn't exists.
1311                         if ! ${IFCONFIG_CMD} $child > /dev/null 2>&1; then
1312                                 continue
1313                         fi
1314                         ${IFCONFIG_CMD} -n ${child} destroy
1315                         if [ $? -eq 0 ]; then
1316                                 _list="$_list $child"
1317                         fi
1318                 done
1319         done
1320         if [ -n "${_list# }" ]; then
1321                 echo "Destroyed wlan(4) interfaces: ${_list# }."
1322         fi
1323         debug "Destroyed wlan(4)s: ${_list# }"
1324 }
1325
1326 # clone_up
1327 #       Create cloneable interfaces.
1328 #
1329 clone_up()
1330 {
1331         local _list ifn ifopt _iflist _inet6 _n tmpargs
1332         _list=
1333         _iflist=$*
1334
1335         # create_args_IF
1336         for ifn in ${cloned_interfaces}; do
1337                 # Parse ifn:ifopt.
1338                 OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
1339                 case $_iflist in
1340                 ""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn)     ;;
1341                 *)      continue ;;
1342                 esac
1343                 case $ifn in
1344                 epair[0-9]*)
1345                         # epair(4) uses epair[0-9] for creation and
1346                         # epair[0-9][ab] for configuration.
1347                         #
1348                         # Skip if ${ifn}a or ${ifn}b already exist.
1349                         if ${IFCONFIG_CMD} ${ifn}a > /dev/null 2>&1; then
1350                                 continue
1351                         elif ${IFCONFIG_CMD} ${ifn}b > /dev/null 2>&1; then
1352                                 continue
1353                         fi
1354                         ${IFCONFIG_CMD} ${ifn} create \
1355                             `get_if_var ${ifn} create_args_IF`
1356                         if [ $? -eq 0 ]; then
1357                                 _list="$_list ${ifn}a ${ifn}b"
1358                         fi
1359                 ;;
1360                 *)
1361                         # Skip if ${ifn} already exists.
1362                         if ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
1363                                 continue
1364                         fi
1365                         ${IFCONFIG_CMD} ${ifn} create \
1366                             `get_if_var ${ifn} create_args_IF`
1367                         if [ $? -eq 0 ]; then
1368                                 _list="$_list $ifn"
1369                         fi
1370                 esac
1371         done
1372         if [ -n "$gif_interfaces" ]; then
1373                 warn "\$gif_interfaces is obsolete.  Use \$cloned_interfaces instead."
1374         fi
1375         for ifn in ${gif_interfaces}; do
1376                 # Parse ifn:ifopt.
1377                 OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
1378                 case $_iflist in
1379                 ""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn)     ;;
1380                 *)      continue ;;
1381                 esac
1382                 # Skip if ifn already exists.
1383                 if ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
1384                         continue
1385                 fi
1386                 case $ifn in
1387                 gif[0-9]*)
1388                         ${IFCONFIG_CMD} $ifn create
1389                 ;;
1390                 *)
1391                         _n=$(${IFCONFIG_CMD} gif create)
1392                         ${IFCONFIG_CMD} $_n name $ifn
1393                 ;;
1394                 esac
1395                 if [ $? -eq 0 ]; then
1396                         _list="$_list $ifn"
1397                         tmpargs=$(get_if_var $ifn gifconfig_IF)
1398                         _inet6=''
1399                         case "$tmpargs" in
1400                         '')
1401                         ;;
1402                         inet6[[:space:]]*)
1403                                 tmpargs=${tmpargs#inet6}
1404                                 _inet6=inet6
1405                                 # FALLTHROUGH
1406                         ;&
1407                         *)
1408                                 ${IFCONFIG_CMD} $ifn $_inet6 tunnel $tmpargs
1409                         ;;
1410                         esac
1411                 fi
1412         done
1413         if [ -n "${_list# }" ]; then
1414                 echo "Created clone interfaces: ${_list# }."
1415         fi
1416         debug "Cloned: ${_list# }"
1417 }
1418
1419 # clone_down
1420 #       Destroy cloned interfaces. Destroyed interfaces are echoed to
1421 #       standard output.
1422 #
1423 clone_down()
1424 {
1425         local _list ifn _difn ifopt _iflist _sticky
1426         _list=
1427         _iflist=$*
1428
1429         : ${cloned_interfaces_sticky:=NO}
1430         if checkyesno cloned_interfaces_sticky; then
1431                 _sticky=1
1432         else
1433                 _sticky=0
1434         fi
1435         for ifn in ${cloned_interfaces} ${gif_interfaces}; do
1436                 # Parse ifn:ifopt.
1437                 OIFS=$IFS; IFS=:; set -- $ifn; ifn=$1; ifopt=$2; IFS=$OIFS
1438                 case $ifopt:$_sticky in
1439                 sticky:*)       continue ;;     # :sticky => not destroy
1440                 nosticky:*)     ;;              # :nosticky => destroy
1441                 *:1)            continue ;;     # global sticky knob == 1
1442                 esac
1443                 case $_iflist in
1444                 ""|$ifn|$ifn\ *|*\ $ifn\ *|*\ $ifn)     ;;
1445                 *)      continue ;;
1446                 esac
1447                 case $ifn in
1448                 epair[0-9]*)
1449                         # Note: epair(4) uses epair[0-9] for removal and
1450                         # epair[0-9][ab] for configuration.
1451                         #
1452                         # Skip if both of ${ifn}a and ${ifn}b do not exist.
1453                         if ${IFCONFIG_CMD} ${ifn}a > /dev/null 2>&1; then
1454                                 _difn=${ifn}a
1455                         elif ${IFCONFIG_CMD} ${ifn}b > /dev/null 2>&1; then
1456                                 _difn=${ifn}b
1457                         else
1458                                 continue
1459                         fi
1460                         ${IFCONFIG_CMD} -n $_difn destroy
1461                         if [ $? -eq 0 ]; then
1462                                 _list="$_list ${ifn}a ${ifn}b"
1463                         fi
1464                 ;;
1465                 *)
1466                         # Skip if ifn does not exist.
1467                         if ! ${IFCONFIG_CMD} $ifn > /dev/null 2>&1; then
1468                                 continue
1469                         fi
1470                         ${IFCONFIG_CMD} -n ${ifn} destroy
1471                         if [ $? -eq 0 ]; then
1472                                 _list="$_list $ifn"
1473                         fi
1474                 ;;
1475                 esac
1476         done
1477         if [ -n "${_list# }" ]; then
1478                 echo "Destroyed clone interfaces: ${_list# }."
1479         fi
1480         debug "Destroyed clones: ${_list# }"
1481 }
1482
1483 # childif_create
1484 #       Create and configure child interfaces.  Return 0 if child
1485 #       interfaces are created.
1486 #
1487 childif_create()
1488 {
1489         local cfg child child_vlans create_args debug_flags ifn i
1490         cfg=1
1491         ifn=$1
1492
1493         # Create vlan interfaces
1494         child_vlans=`get_if_var $ifn vlans_IF`
1495
1496         if [ -n "${child_vlans}" ]; then
1497                 load_kld if_vlan
1498         fi
1499
1500         for child in ${child_vlans}; do
1501                 if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
1502                         child="${ifn}.${child}"
1503                         create_args=`get_if_var $child create_args_IF`
1504                         ${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1505                 else
1506                         create_args="vlandev $ifn `get_if_var $child create_args_IF`"
1507                         if expr $child : 'vlan[0-9][0-9]*$' >/dev/null 2>&1; then
1508                                 ${IFCONFIG_CMD} $child create ${create_args} && cfg=0
1509                         else
1510                                 i=`${IFCONFIG_CMD} vlan create ${create_args}`
1511                                 ${IFCONFIG_CMD} $i name $child && cfg=0
1512                         fi
1513                 fi
1514                 if autoif $child; then
1515                         ifn_start $child
1516                 fi
1517         done
1518
1519         return ${cfg}
1520 }
1521
1522 # childif_destroy
1523 #       Destroy child interfaces.
1524 #
1525 childif_destroy()
1526 {
1527         local cfg child child_vlans ifn
1528         cfg=1
1529
1530         child_vlans=`get_if_var $ifn vlans_IF`
1531         for child in ${child_vlans}; do
1532                 if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
1533                         child="${ifn}.${child}"
1534                 fi
1535                 if ! ifexists $child; then
1536                         continue
1537                 fi
1538                 ${IFCONFIG_CMD} -n $child destroy && cfg=0
1539         done
1540
1541         return ${cfg}
1542 }
1543
1544 # ng_mkpeer
1545 #       Create netgraph nodes.
1546 #
1547 ng_mkpeer()
1548 {
1549         ngctl -f - 2> /dev/null <<EOF
1550 mkpeer $*
1551 msg dummy nodeinfo
1552 EOF
1553 }
1554
1555 # ng_create_one
1556 #       Create netgraph nodes.
1557 #
1558 ng_create_one()
1559 {
1560         local t
1561
1562         ng_mkpeer $* | while read line; do
1563                 t=`expr "${line}" : '.* name="\([a-z]*[0-9]*\)" .*'`
1564                 if [ -n "${t}" ]; then
1565                         echo ${t}
1566                         return
1567                 fi
1568         done
1569 }
1570
1571 # ifnet_rename [ifname]
1572 #       Rename interfaces if ifconfig_IF_name is defined.
1573 #
1574 ifnet_rename()
1575 {
1576         local _if _ifname
1577
1578         # ifconfig_IF_name
1579         for _if in ${*:-$(${IFCONFIG_CMD} -l)}; do
1580                 _ifname=`get_if_var $_if ifconfig_IF_name`
1581                 if [ ! -z "$_ifname" ]; then
1582                         ${IFCONFIG_CMD} $_if name $_ifname
1583                 fi
1584         done
1585
1586         return 0
1587 }
1588
1589 # list_net_interfaces type
1590 #       List all network interfaces. The type of interface returned
1591 #       can be controlled by the type argument. The type
1592 #       argument can be any of the following:
1593 #               nodhcp  - all interfaces, excluding DHCP configured interfaces
1594 #               dhcp    - list only DHCP configured interfaces
1595 #               noautoconf      - all interfaces, excluding IPv6 Stateless
1596 #                                 Address Autoconf configured interfaces
1597 #               autoconf        - list only IPv6 Stateless Address Autoconf
1598 #                                 configured interfaces
1599 #       If no argument is specified all network interfaces are output.
1600 #       Note that the list will include cloned interfaces if applicable.
1601 #       Cloned interfaces must already exist to have a chance to appear
1602 #       in the list if ${network_interfaces} is set to `auto'.
1603 #
1604 list_net_interfaces()
1605 {
1606         local type _tmplist _list _autolist _lo _if
1607         type=$1
1608
1609         # Get a list of ALL the interfaces and make lo0 first if it's there.
1610         #
1611         _tmplist=
1612         case ${network_interfaces} in
1613         [Aa][Uu][Tt][Oo])
1614                 _autolist="`${IFCONFIG_CMD} -l`"
1615                 _lo=
1616                 for _if in ${_autolist} ; do
1617                         if autoif $_if; then
1618                                 if [ "$_if" = "lo0" ]; then
1619                                         _lo="lo0 "
1620                                 else
1621                                         _tmplist="${_tmplist} ${_if}"
1622                                 fi
1623                         fi
1624                 done
1625                 _tmplist="${_lo}${_tmplist# }"
1626         ;;
1627         *)
1628                 for _if in ${network_interfaces} ${cloned_interfaces}; do
1629                         # epair(4) uses epair[0-9] for creation and
1630                         # epair[0-9][ab] for configuration.
1631                         case $_if in
1632                         epair[0-9]*)
1633                                 _tmplist="$_tmplist ${_if}a ${_if}b"
1634                         ;;
1635                         *)
1636                                 _tmplist="$_tmplist $_if"
1637                         ;;
1638                         esac
1639                 done
1640                 #
1641                 # lo0 is effectively mandatory, so help prevent foot-shooting
1642                 #
1643                 case "$_tmplist" in
1644                 lo0|'lo0 '*|*' lo0'|*' lo0 '*)
1645                         # This is fine, do nothing
1646                         _tmplist="${_tmplist# }"
1647                 ;;
1648                 *)
1649                         _tmplist="lo0 ${_tmplist# }"
1650                 ;;
1651                 esac
1652         ;;
1653         esac
1654
1655         _list=
1656         case "$type" in
1657         nodhcp)
1658                 for _if in ${_tmplist} ; do
1659                         if ! dhcpif $_if && \
1660                            [ -n "`_ifconfig_getargs $_if`" ]; then
1661                                 _list="${_list# } ${_if}"
1662                         fi
1663                 done
1664         ;;
1665         dhcp)
1666                 for _if in ${_tmplist} ; do
1667                         if dhcpif $_if; then
1668                                 _list="${_list# } ${_if}"
1669                         fi
1670                 done
1671         ;;
1672         noautoconf)
1673                 for _if in ${_tmplist} ; do
1674                         if ! ipv6_autoconfif $_if && \
1675                            [ -n "`_ifconfig_getargs $_if ipv6`" ]; then
1676                                 _list="${_list# } ${_if}"
1677                         fi
1678                 done
1679         ;;
1680         autoconf)
1681                 for _if in ${_tmplist} ; do
1682                         if ipv6_autoconfif $_if; then
1683                                 _list="${_list# } ${_if}"
1684                         fi
1685                 done
1686         ;;
1687         *)
1688                 _list=${_tmplist}
1689         ;;
1690         esac
1691
1692         echo $_list
1693
1694         return 0
1695 }
1696
1697 # get_default_if -address_family
1698 #       Get the interface of the default route for the given address family.
1699 #       The -address_family argument must be suitable passing to route(8).
1700 #
1701 get_default_if()
1702 {
1703         local routeget oldifs defif line
1704         defif=
1705         oldifs="$IFS"
1706         IFS="
1707 "
1708         for line in `route -n get $1 default 2>/dev/null`; do
1709                 case $line in
1710                 *interface:*)
1711                         defif=${line##*: }
1712                         ;;
1713                 esac
1714         done
1715         IFS=${oldifs}
1716
1717         echo $defif
1718 }
1719
1720 # hexdigit arg
1721 #       Echo decimal number $arg (single digit) in hexadecimal format.
1722 hexdigit()
1723 {
1724         printf '%x\n' "$1"
1725 }
1726
1727 # hexprint arg
1728 #       Echo decimal number $arg (multiple digits) in hexadecimal format.
1729 hexprint()
1730 {
1731         printf '%x\n' "$1"
1732 }
1733
1734 is_wired_interface()
1735 {
1736         local media
1737
1738         case `${IFCONFIG_CMD} $1 2>/dev/null` in
1739         *media:?Ethernet*) media=Ethernet ;;
1740         esac
1741
1742         test "$media" = "Ethernet"
1743 }
1744
1745 # network6_getladdr if [flag]
1746 #       Echo link-local address from $if if any.
1747 #       If flag is defined, tentative ones will be excluded.
1748 network6_getladdr()
1749 {
1750         local _if _flag proto addr rest
1751         _if=$1
1752         _flag=$2
1753
1754         ${IFCONFIG_CMD} $_if 2>/dev/null | while read proto addr rest; do
1755                 case "${proto}/${addr}/${_flag}/${rest}" in
1756                 inet6/fe80::*//*)
1757                         echo ${addr}
1758                 ;;
1759                 inet6/fe80:://*tentative*)      # w/o flag
1760                         sleep `${SYSCTL_N} net.inet6.ip6.dad_count`
1761                         network6_getladdr $_if $_flags
1762                 ;;
1763                 inet6/fe80::/*/*tentative*)     # w/ flag
1764                         echo ${addr}
1765                 ;;
1766                 *)
1767                         continue
1768                 ;;
1769                 esac
1770
1771                 return
1772         done
1773 }