3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 # Set default value of _localbase if not previously set
25 : ${_localbase:="/usr/local"}
27 # rc_debug can't be set here without interferring with rc.subr's setting it
28 # when the kenv variable rc.debug is set.
29 #rc_debug="NO" # Set to YES to enable debugging output from rc.d
30 rc_info="NO" # Enables display of informational messages at boot.
31 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
32 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
33 early_late_divider="FILESYSTEMS" # Script that separates early/late
34 # stages of the boot process. Make sure you know
35 # the ramifications if you change this.
36 # See rc.conf(5) for more details.
37 always_force_depends="NO" # Set to check that indicated dependencies are
38 # running during boot (can increase boot time).
40 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
41 apmd_enable="NO" # Run apmd to handle APM event from userland.
42 apmd_flags="" # Flags to apmd (if enabled).
43 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
44 ddb_config="/etc/ddb.conf" # ddb(8) config file.
45 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
46 devd_flags="" # Additional flags for devd(8).
47 devmatch_enable="YES" # Demand load kernel modules based on device ids.
48 devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch.
49 #kld_list="" # Kernel modules to load after local disks are mounted
50 kldxref_enable="YES" # Build linker.hints files with kldxref(8).
51 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
52 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
53 powerd_enable="NO" # Run powerd to lower our power usage.
54 powerd_flags="" # Flags to powerd (if enabled).
55 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
56 tmpsize="20m" # Size of mfs /tmp if created
57 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
58 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
59 varsize="32m" # Size of mfs /var if created
60 varmfs_flags="-S" # Extra mount options for the mfs /var
61 mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback
62 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
63 cleanvar_enable="YES" # Clean the /var directory
64 local_startup="${_localbase}/etc/rc.d" # startup script dirs.
65 script_name_sep=" " # Change if your startup scripts' names contain spaces
66 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
69 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
70 zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys
71 zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent
72 zpool_reguid="" # Set to zpools for which the GUID should be replaced
76 zfsd_enable="NO" # Set to YES to automatically start the ZFS fault
79 gptboot_enable="YES" # GPT boot success/failure reporting.
81 # Experimental - test before enabling
82 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
83 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
84 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
85 gbde_lockdir="/etc" # Where to look for gbde lockfiles
87 # GELI disk encryption configuration.
88 geli_devices="" # List of devices to automatically attach in addition to
89 # GELI devices listed in /etc/fstab.
90 geli_groups="" # List of groups containing devices to automatically
91 # attach with the same keyfiles and passphrase
92 geli_tries="" # Number of times to attempt attaching geli device.
93 # If empty, kern.geom.eli.tries will be used.
94 geli_default_flags="" # Default flags for geli(8).
95 geli_autodetach="YES" # Automatically detach on last close.
96 # Providers are marked as such when all file systems are
99 #geli_devices="da1 mirror/home"
100 #geli_da1_flags="-p -k /etc/geli/da1.keys"
101 #geli_da1_autodetach="NO"
102 #geli_mirror_home_flags="-k /etc/geli/home.keys"
103 #geli_groups="storage backup"
104 #geli_storage_flags="-k /etc/geli/storage.keys"
105 #geli_storage_devices="ada0 ada1"
106 #geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
107 #geli_backup_devices="ada2 ada3"
109 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
110 root_hold_delay="30" # Time to wait for root mount hold release.
111 fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck
112 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
113 fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y
114 background_fsck="YES" # Attempt to run fsck in the background where possible.
115 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
116 growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot
117 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
118 extra_netfs_types="NO" # List of network extra filesystem types for delayed
119 # mount at startup (or NO).
121 ##############################################################
122 ### Network configuration sub-section ######################
123 ##############################################################
125 ### Basic network and firewall/security options: ###
126 hostname="" # Set this!
127 hostid_enable="YES" # Set host UUID.
128 hostid_file="/etc/hostid" # File with hostuuid.
129 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
130 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
131 dhclient_flags="" # Extra flags to pass to dhcp client.
132 #dhclient_flags_em0="" # Extra dhclient flags for em0 only
133 background_dhclient="NO" # Start dhcp client in the background.
134 #background_dhclient_em0="YES" # Start dhcp client on em0 in the background.
135 synchronous_dhclient="NO" # Start dhclient directly on configured
136 # interfaces during startup.
137 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
138 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
139 netif_enable="YES" # Set to YES to initialize network interfaces
140 netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
141 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
142 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
143 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
145 firewall_enable="NO" # Set to YES to enable firewall functionality
146 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
147 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
148 firewall_quiet="NO" # Set to YES to suppress rule display
149 firewall_logging="NO" # Set to YES to enable events logging
150 firewall_logif="NO" # Set to YES to create logging-pseudo interface
151 firewall_flags="" # Flags passed to ipfw when type is a file
152 firewall_coscripts="" # List of executables/scripts to run after
153 # firewall starts/stops
154 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
156 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
158 firewall_simple_iif="em1" # Inside network interface for "simple"
160 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
162 firewall_simple_oif="em0" # Outside network interface for "simple"
164 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
166 #firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple"
168 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
169 # for "simple" firewall.
170 #firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple"
172 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
173 # for "simple" firewall.
174 firewall_myservices="" # List of ports/protocols on which this host
175 # offers services for "workstation" firewall.
176 firewall_allowservices="" # List of IPs which have access to
177 # $firewall_myservices for "workstation"
179 firewall_trusted="" # List of IPs which have full access to this
180 # host for "workstation" firewall.
181 firewall_logdeny="NO" # Set to YES to log default denied incoming
182 # packets for "workstation" firewall.
183 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
184 # for which denied incoming packets are not
185 # logged for "workstation" firewall.
186 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
187 firewall_nat_interface="" # Public interface or IPaddress to use
188 firewall_nat_flags="" # Additional configuration parameters
189 firewall_nat64_enable="NO" # Enable kernel NAT64 module.
190 firewall_nptv6_enable="NO" # Enable kernel NPTv6 module.
191 firewall_pmod_enable="NO" # Enable kernel protocols modification module.
192 dummynet_enable="NO" # Load the dummynet(4) module
193 ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow
194 ip_portrange_first="NO" # Set first dynamically allocated port
195 ip_portrange_last="NO" # Set last dynamically allocated port
196 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
197 ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon
198 ike_flags="" # Additional flags for IKE daemon
199 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
200 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
201 natd_program="/sbin/natd" # path to natd, if you want a different one.
202 natd_enable="NO" # Enable natd (if firewall_enable == YES).
203 natd_interface="" # Public interface or IPaddress to use.
204 natd_flags="" # Additional flags for natd.
205 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
206 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
207 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
208 # /usr/src/contrib/ipfilter/rules for examples
209 ipfilter_flags="" # additional flags for ipfilter
210 ippool_enable="NO" # Set to YES to enable ip filter pools
211 ippool_program="/sbin/ippool" # where the ippool program lives
212 ippool_rules="/etc/ippool.tables" # rules definition file for ippool
213 ippool_flags="" # additional flags for ippool
214 ipnat_enable="NO" # Set to YES to enable ipnat functionality
215 ipnat_program="/sbin/ipnat" # where the ipnat program lives
216 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
217 ipnat_flags="" # additional flags for ipnat
218 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
219 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
220 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
221 ipfs_enable="NO" # Set to YES to enable saving and restoring
222 # of state tables at shutdown and boot
223 ipfs_program="/sbin/ipfs" # where the ipfs program lives
224 ipfs_flags="" # additional flags for ipfs
225 pf_enable="NO" # Set to YES to enable packet filter (pf)
226 pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent
228 pf_program="/sbin/pfctl" # where the pfctl program lives
229 pf_flags="" # additional flags for pfctl
230 pf_fallback_rules_enable="NO" # fallback if loading ruleset fails
231 pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure
232 #pf_fallback_rules="block drop log all
233 #pass quick on em4" # multi-rule
234 pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure
235 pflog_enable="NO" # Set to YES to enable packet filter logging
236 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
237 pflog_program="/sbin/pflogd" # where the pflogd program lives
238 pflog_flags="" # additional flags for pflogd
239 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
240 ftpproxy_flags="" # additional flags for ftp-proxy(8)
241 pfsync_enable="NO" # Expose pf state to other hosts for syncing
242 pfsync_syncdev="" # Interface for pfsync to work through
243 pfsync_syncpeer="" # IP address of pfsync peer host
244 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
245 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
246 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
247 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
248 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
249 # NOTE: this violates the TCP specification
250 icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets
251 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
252 network_interfaces="auto" # List of network interfaces (or "auto").
253 cloned_interfaces="" # List of cloned network interfaces to create.
254 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
255 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
256 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
257 #ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
258 #ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
259 #ifconfig_em0_name="net0" # Change interface name from em0 to net0.
260 #vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device
261 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
262 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
263 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8)
264 #ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
266 #autobridge_interfaces="bridge0" # List of bridges to check
267 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
269 # User ppp configuration.
270 ppp_enable="NO" # Start user-ppp (or NO).
271 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
272 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
273 # For details see man page for ppp(8). Default is auto.
274 ppp_nat="YES" # Use PPP's internal network address translation or NO.
275 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
276 ppp_user="root" # Which user to run ppp as
278 # Start multiple instances of ppp at boot time
279 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
280 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
281 #ppp_profile2_nat="NO" # Override nat mode for profile2
282 # profile3 uses default ppp_mode and ppp_nat
284 ### Network daemon (miscellaneous) ###
285 hostapd_program="/usr/sbin/hostapd"
286 hostapd_enable="NO" # Run hostap daemon.
287 syslogd_enable="YES" # Run syslog daemon (or NO).
288 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
289 syslogd_flags="-s" # Flags to syslogd (if enabled).
290 syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted.
291 altlog_proglist="" # List of chrooted applicatioins in /var
292 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
293 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
294 inetd_flags="-wW -C 60" # Optional flags to inetd
295 iscsid_enable="NO" # iSCSI initiator daemon.
296 iscsictl_enable="NO" # iSCSI initiator autostart.
297 iscsictl_flags="-Aa" # Optional flags to iscsictl.
298 hastd_enable="NO" # Run the HAST daemon (YES/NO).
299 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
300 hastd_flags="" # Optional flags to hastd.
301 ggated_enable="NO" # Run the ggate daemon (YES/NO).
302 ggated_config="/etc/gg.exports" # ggated(8) exports file.
303 ggated_flags="" # Extra parameters like which port to bind to.
304 ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
305 local_unbound_enable="NO" # Local caching resolver
306 local_unbound_tls="NO" # Use DNS over TLS
307 blacklistd_enable="NO" # Run blacklistd daemon (YES/NO).
308 blacklistd_flags="" # Optional flags for blacklistd(8).
309 resolv_enable="YES" # Enable resolv / resolvconf
312 # kerberos. Do not run the admin daemons on slave servers
314 kdc_enable="NO" # Run a kerberos 5 KDC (or NO).
315 kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC
316 kdc_flags="" # Additional flags to the kerberos 5 KDC
317 kadmind_enable="NO" # Run kadmind (or NO)
318 kadmind_program="/usr/libexec/kadmind" # path to kadmind
319 kpasswdd_enable="NO" # Run kpasswdd (or NO)
320 kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
321 kfd_enable="NO" # Run kfd (or NO)
322 kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
324 ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon
326 ipropd_master_program="/usr/libexec/ipropd-master"
327 ipropd_master_flags="" # Flags to ipropd-master.
328 ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
329 ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves.
330 ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon
332 ipropd_slave_program="/usr/libexec/ipropd-slave"
333 ipropd_slave_flags="" # Flags to ipropd-slave.
334 ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
335 ipropd_slave_master="" # master node name.
337 gssd_enable="NO" # Run the gssd daemon (or NO).
338 gssd_program="/usr/sbin/gssd" # Path to gssd.
339 gssd_flags="" # Flags for gssd.
341 rwhod_enable="NO" # Run the rwho daemon (or NO).
342 rwhod_flags="" # Flags for rwhod
343 rarpd_enable="NO" # Run rarpd (or NO).
344 rarpd_flags="-a" # Flags to rarpd.
345 bootparamd_enable="NO" # Run bootparamd (or NO).
346 bootparamd_flags="" # Flags to bootparamd
347 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
348 pppoed_provider="*" # Provider and ppp(8) config file entry.
349 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
350 pppoed_interface="em0" # The interface that pppoed runs on.
351 sshd_enable="NO" # Enable sshd
352 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
353 sshd_flags="" # Additional flags for sshd.
354 ftpd_enable="NO" # Enable stand-alone ftpd.
355 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
356 ftpd_flags="" # Additional flags to stand-alone ftpd.
358 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
359 autofs_enable="NO" # Run autofs daemons.
360 automount_flags="" # Flags to automount(8) (if autofs enabled).
361 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
362 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
363 nfs_client_enable="NO" # This host is an NFS client (or NO).
364 nfs_access_cache="60" # Client cache timeout in seconds
365 nfs_server_enable="NO" # This host is an NFS server (or NO).
366 nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
367 nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO).
368 nfs_server_maxio="131072" # Maximum I/O size for the nfsd.
369 mountd_enable="NO" # Run mountd (or NO).
370 mountd_flags="-r -S" # Flags to mountd (if NFS server enabled).
371 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
372 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
373 nfs_bufpackets="" # bufspace (in packets) for client
374 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
375 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
376 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
377 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
378 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
379 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
380 rpcbind_flags="" # Flags to rpcbind (if enabled).
381 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
382 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
383 keyserv_flags="" # Flags to keyserv (if enabled).
384 nfsv4_server_enable="NO" # Enable support for NFSv4
385 nfsv4_server_only="NO" # Set NFS server to NFSv4 only
386 nfscbd_enable="NO" # NFSv4 client side callback daemon
387 nfscbd_flags="" # Flags for nfscbd
388 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
389 nfsuserd_flags="" # Flags for nfsuserd
390 tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount
391 tlsclntd_flags="" # Flags for rpc.tlsclntd
392 tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd
393 tlsservd_flags="" # Flags for rpc.tlsservd
395 ### Network Time Services options: ###
396 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
397 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
398 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
399 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
400 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
401 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
402 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
403 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
404 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
405 ntpd_flags="" # Additional flags to ntpd
406 ntp_src_leapfile="/etc/ntp/leap-seconds"
407 # Initial source for ntpd leapfile
408 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
409 # Working copy (updated weekly) leapfile
410 ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
411 # Source from which to fetch leapfile
412 ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
413 # e.g. --no-verify-peer
414 ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to
416 ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch
418 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
419 nis_client_enable="NO" # We're an NIS client (or NO).
420 nis_client_flags="" # Flags to ypbind (if enabled).
421 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
422 nis_ypset_flags="" # Flags to ypset (if enabled).
423 nis_server_enable="NO" # We're an NIS server (or NO).
424 nis_server_flags="" # Flags to ypserv (if enabled).
425 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
426 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
427 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
428 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
429 nis_ypldap_enable="NO" # Run ypldap at boot time (or NO).
430 nis_ypldap_flags="" # Flags to ypldap (if enabled).
433 # Be sure to understand the security implications of running SNMP v1/v2
435 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
436 bsnmpd_flags="" # Flags for bsnmpd.
438 ### Network routing options: ###
439 defaultrouter="NO" # Set to default gateway (or NO).
440 #defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N
441 static_arp_pairs="" # Set to static ARP list (or leave empty).
442 static_ndp_pairs="" # Set to static NDP list (or leave empty).
443 static_routes="" # Set to static route list (or leave empty).
444 gateway_enable="NO" # Set to YES if this host will be a gateway.
445 routed_enable="NO" # Set to YES to enable a routing daemon.
446 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
447 routed_flags="-q" # Flags for routing daemon.
448 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
449 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
450 accept_sourceroute="NO" # accept source routed packets to us
453 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
454 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
456 sdpd_enable="NO" # Enable sdpd(8) (or NO)
457 sdpd_control="/var/run/sdp" # sdpd(8) control socket
458 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
459 sdpd_username="nobody" # it initializes
461 bthidd_enable="NO" # Enable bthidd(8) (or NO)
462 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
463 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
464 bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option
466 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
467 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
469 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
470 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
471 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
472 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
474 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
475 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
476 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
477 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
479 ubthidhci_enable="NO" # Switch an USB BT controller present on
480 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
481 #ubthidhci_addr="2" # Check usbconfig list to find the correct
482 # numbers for your system.
484 ### Network link/usability verification options
485 netwait_enable="NO" # Enable rc.d/netwait (or NO)
486 #netwait_ip="" # Wait for ping response from any IP in this list.
487 netwait_timeout="60" # Total number of seconds to perform pings.
488 #netwait_if="" # Wait for active link on each intf in this list.
489 netwait_if_timeout="30" # Total number of seconds to monitor link state.
491 ### Miscellaneous network options: ###
492 icmp_bmcastecho="NO" # respond to broadcast ping packets
494 ### IPv6 options: ###
495 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
496 # (or "auto" or "none").
497 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
498 # corresponding $ifconfig_IF_ipv6 is
499 # marked as IFDISABLED for security
501 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
502 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
503 #ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N
504 ipv6_static_routes="" # Set to static route list (or leave empty).
505 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
506 # route toward loopback interface.
507 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
508 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
509 ipv6_cpe_wanif="NO" # Set to the upstream interface name if this
510 # node will work as a router to forward IPv6
511 # packets not explicitly addressed to itself.
512 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
515 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
516 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
517 route6d_flags="" # Flags to IPv6 routing daemon.
518 #route6d_flags="-l" # Example for route6d with only IPv6 site local
520 #route6d_flags="-q" # If you want to run a routing daemon on an end
521 # node, you should stop advertisement.
522 #ipv6_network_interfaces="em0 em1" # Examples for router
523 # or static configuration for end node.
524 # Choose correct prefix value.
525 #ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
526 #ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
527 ipv6_default_interface="NO" # Default output interface for scoped addrs.
528 # This works only with
529 # ipv6_gateway_enable="NO".
530 rtsol_flags="-i" # Flags to IPv6 router solicitation.
531 rtsold_enable="NO" # Set to YES to enable an IPv6 router
532 # solicitation daemon.
533 rtsold_flags="-a -i" # Flags to an IPv6 router solicitation
535 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
536 # advertisement daemon. If set to YES,
537 # this router becomes a possible candidate
538 # IPv6 default router for local subnets.
539 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
540 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
541 # tunneling interface. Specify this entry
542 # to enable 6to4 interface.
543 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
544 # to limit peer addr range. Effective value
546 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
547 # If you like, you can set "AUTO" for this.
548 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
549 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
550 # communication. (like ::ffff:a.b.c.d)
551 ip6addrctl_enable="YES" # Set to YES to enable default address selection
552 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
553 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
554 # (ipv4_prefer, ipv6_prefer, or AUTO)
556 ##############################################################
557 ### System console options #################################
558 ##############################################################
560 keyboard="" # keyboard device to use (default /dev/kbd0).
561 keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
562 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
563 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
564 keychange="NO" # function keys default values (or NO).
565 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
566 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
567 font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
568 font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
569 font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
570 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
571 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
572 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
573 # specifically overriden in rc.conf(5).
574 moused_enable="NO" # Run the mouse daemon.
575 moused_type="auto" # See man page for rc.conf(5) for available settings.
576 moused_port="/dev/psm0" # Set to your mouse port.
577 moused_flags="" # Any additional flags to moused.
578 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
579 # language code table, specify alternative range
580 # start like mousechar_start=3, see vidcontrol(1)
581 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
582 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
584 ##############################################################
585 ### Mail Transfer Agent (MTA) options ######################
586 ##############################################################
588 mta_start_script="/etc/rc.sendmail"
589 # Script to start your chosen MTA, called by /etc/rc.
590 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
591 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
592 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
593 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
594 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
595 sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
596 #sendmail_cert_cn="CN" # CN of the generate certificate
597 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
598 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
599 # Flags for localhost-only MTA
600 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
601 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
602 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
603 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
604 # Flags for sendmail_msp_queue daemon.
605 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
608 ##############################################################
609 ### Miscellaneous administrative options ###################
610 ##############################################################
612 auditd_enable="NO" # Run the audit daemon.
613 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
614 auditd_flags="" # Which options to pass to the audit daemon.
615 auditdistd_enable="NO" # Run the audit daemon.
616 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
617 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
618 cron_enable="YES" # Run the periodic job daemon.
619 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
620 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
621 cron_flags="" # Which options to pass to the cron daemon.
622 cfumass_enable="NO" # Create default LUN for cfumass(4).
623 cfumass_dir="/var/cfumass" # File to LUN's contents.
624 cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path.
625 lpd_enable="NO" # Run the line printer daemon.
626 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
627 lpd_flags="" # Flags to lpd (if enabled).
628 nscd_enable="NO" # Run the nsswitch caching daemon.
629 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
630 chkprintcap_flags="-d" # Create missing directories by default.
631 dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
632 dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev.
633 dumpdir="/var/crash" # Directory where crash dumps are to be stored
634 savecore_enable="YES" # Extract core from dump devices if any
635 savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
636 # By default, only the 10 most recent kernel dumps
638 service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files.
639 crashinfo_enable="YES" # Automatically generate crash dump summary.
640 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
641 quota_enable="NO" # turn on quotas on startup (or NO).
642 check_quotas="YES" # Check quotas on startup (or NO).
643 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
644 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
645 quotacheck_flags="-a" # Check all file system quotas (if enabled)
646 accounting_enable="NO" # Turn on process accounting (or NO).
647 firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
648 # this file exists. Should be on a R/W filesystem so
649 # the file can be deleted after the boot completes.
650 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
651 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
652 linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific
653 # filesystems at startup.
654 clear_tmp_enable="NO" # Clear /tmp at startup.
655 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
656 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
657 ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg"
658 # shared library search paths
659 ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
660 # 32-bit compatibility shared library search paths
661 ldconfig_local_dirs="${_localbase}/libdata/ldconfig"
662 # Local directories with ldconfig configuration files.
663 ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32"
664 # Local directories with 32-bit compatibility ldconfig
665 # configuration files.
666 kern_securelevel_enable="NO" # kernel security level (see security(7))
667 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
668 # Note that setting securelevel to 0 will result
669 # in the system booting with securelevel set to 1, as
670 # init(8) will raise the level when rc(8) completes.
671 update_motd="YES" # update version info in /etc/motd (or NO)
672 entropy_boot_file="/boot/entropy" # Set to NO to disable very early
673 # (used at early boot time) entropy caching through reboots.
674 entropy_file="/entropy" # Set to NO to disable late (used when going multi-user)
675 # entropy through reboots.
676 # /var/db/entropy-file is preferred if / is not avail.
677 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
678 entropy_save_sz="4096" # Size of the entropy cache files.
679 entropy_save_num="8" # Number of entropy cache files to save.
680 harvest_mask="511" # Entropy device harvests all but the very invasive sources.
681 # (See 'sysctl kern.random.harvest' and random(4))
682 osrelease_enable="YES" # Update /var/run/os-release on boot (or NO).
683 osrelease_file="/var/run/os-release" # File to update for os-release.
684 osrelease_perms="444" # Default permission for os-release file.
685 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
686 watchdogd_enable="NO" # Start the software watchdog daemon
687 watchdogd_flags="" # Flags to watchdogd (if enabled)
688 watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags
689 watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped.
690 # Has effect only for system shutdown.
691 # Overrides -x in watchdogd_flags.
692 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
694 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
695 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
696 # apply (must be mounted already, i.e. fstab(5))
697 devfs_load_rulesets="YES" # Enable to always load the default rulesets
698 performance_cx_lowest="NONE" # Online CPU idle state
699 performance_cpu_freq="NONE" # Online CPU frequency
700 economy_cx_lowest="Cmax" # Offline CPU idle state
701 economy_cpu_freq="NONE" # Offline CPU frequency
702 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
703 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
704 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
706 newsyslog_enable="YES" # Run newsyslog at startup.
707 newsyslog_flags="-CN" # Newsyslog flags to create marked files
708 mixer_enable="YES" # Run the sound mixer.
709 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
711 # rctl(8) requires kernel options RACCT and RCTL
712 rctl_enable="YES" # Load rctl(8) rules on boot
713 rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
715 iovctl_files="" # Config files for iovctl(8)
717 ##############################################################
718 ### Jail Configuration (see rc.conf(5) manual page) ##########
719 ##############################################################
720 jail_enable="NO" # Set to NO to disable starting of any jails
721 jail_conf="/etc/jail.conf" # Configuration file for jail(8)
722 jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration
723 jail_parallel_start="NO" # Start jails in the background
724 jail_list="" # Space separated list of names of jails
725 jail_reverse_stop="NO" # Stop jails in reverse order
727 ##############################################################
728 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
729 ### scripts to source rc_conf_files overrides safely. ##
730 ##############################################################
732 if [ -z "${source_rc_confs_defined}" ]; then
733 source_rc_confs_defined=yes
735 local i sourced_files
736 for i in ${rc_conf_files}; do
737 case ${sourced_files} in
741 sourced_files="${sourced_files}:$i:"
748 # Re-do process to pick up [possibly] redefined $rc_conf_files
749 for i in ${rc_conf_files}; do
750 case ${sourced_files} in
754 sourced_files="${sourced_files}:$i:"
764 # Allow vendors to override FreeBSD defaults in /etc/default/rc.conf
765 # without the need to carefully manage /etc/rc.conf.
766 if [ -r /etc/defaults/vendor.conf ]; then
767 . /etc/defaults/vendor.conf