3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 # rc_debug can't be set here without interferring with rc.subr's setting it
25 # when the kenv variable rc.debug is set.
26 #rc_debug="NO" # Set to YES to enable debugging output from rc.d
27 rc_info="NO" # Enables display of informational messages at boot.
28 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
29 rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
30 early_late_divider="FILESYSTEMS" # Script that separates early/late
31 # stages of the boot process. Make sure you know
32 # the ramifications if you change this.
33 # See rc.conf(5) for more details.
34 always_force_depends="NO" # Set to check that indicated dependencies are
35 # running during boot (can increase boot time).
37 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
38 apmd_enable="NO" # Run apmd to handle APM event from userland.
39 apmd_flags="" # Flags to apmd (if enabled).
40 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
41 ddb_config="/etc/ddb.conf" # ddb(8) config file.
42 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
43 devd_flags="" # Additional flags for devd(8).
44 devmatch_enable="YES" # Demand load kernel modules based on device ids.
45 devmatch_blacklist="" # List of modules (w/o .ko) to exclude from devmatch.
46 #kld_list="" # Kernel modules to load after local disks are mounted
47 kldxref_enable="YES" # Build linker.hints files with kldxref(8).
48 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
49 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
50 powerd_enable="NO" # Run powerd to lower our power usage.
51 powerd_flags="" # Flags to powerd (if enabled).
52 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
53 tmpsize="20m" # Size of mfs /tmp if created
54 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
55 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
56 varsize="32m" # Size of mfs /var if created
57 varmfs_flags="-S" # Extra mount options for the mfs /var
58 mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback
59 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
60 cleanvar_enable="YES" # Clean the /var directory
61 local_startup="/usr/local/etc/rc.d" # startup script dirs.
62 script_name_sep=" " # Change if your startup scripts' names contain spaces
63 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
66 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
69 zfsd_enable="NO" # Set to YES to automatically start the ZFS fault
72 gptboot_enable="YES" # GPT boot success/failure reporting.
74 # Experimental - test before enabling
75 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
76 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
77 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
78 gbde_lockdir="/etc" # Where to look for gbde lockfiles
80 # GELI disk encryption configuration.
81 geli_devices="" # List of devices to automatically attach in addition to
82 # GELI devices listed in /etc/fstab.
83 geli_groups="" # List of groups containing devices to automatically
84 # attach with the same keyfiles and passphrase
85 geli_tries="" # Number of times to attempt attaching geli device.
86 # If empty, kern.geom.eli.tries will be used.
87 geli_default_flags="" # Default flags for geli(8).
88 geli_autodetach="YES" # Automatically detach on last close.
89 # Providers are marked as such when all file systems are
92 #geli_devices="da1 mirror/home"
93 #geli_da1_flags="-p -k /etc/geli/da1.keys"
94 #geli_da1_autodetach="NO"
95 #geli_mirror_home_flags="-k /etc/geli/home.keys"
96 #geli_groups="storage backup"
97 #geli_storage_flags="-k /etc/geli/storage.keys"
98 #geli_storage_devices="ada0 ada1"
99 #geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
100 #geli_backup_devices="ada2 ada3"
102 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
103 root_hold_delay="30" # Time to wait for root mount hold release.
104 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
105 fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y
106 background_fsck="YES" # Attempt to run fsck in the background where possible.
107 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
108 growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot
109 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
110 extra_netfs_types="NO" # List of network extra filesystem types for delayed
111 # mount at startup (or NO).
113 ##############################################################
114 ### Network configuration sub-section ######################
115 ##############################################################
117 ### Basic network and firewall/security options: ###
118 hostname="" # Set this!
119 hostid_enable="YES" # Set host UUID.
120 hostid_file="/etc/hostid" # File with hostuuid.
121 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
122 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
123 dhclient_flags="" # Extra flags to pass to dhcp client.
124 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
125 background_dhclient="NO" # Start dhcp client in the background.
126 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
127 synchronous_dhclient="NO" # Start dhclient directly on configured
128 # interfaces during startup.
129 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
130 defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
131 netif_enable="YES" # Set to YES to initialize network interfaces
132 netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
133 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
134 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
135 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
137 firewall_enable="NO" # Set to YES to enable firewall functionality
138 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
139 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
140 firewall_quiet="NO" # Set to YES to suppress rule display
141 firewall_logging="NO" # Set to YES to enable events logging
142 firewall_logif="NO" # Set to YES to create logging-pseudo interface
143 firewall_flags="" # Flags passed to ipfw when type is a file
144 firewall_coscripts="" # List of executables/scripts to run after
145 # firewall starts/stops
146 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
148 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
150 firewall_simple_iif="ed1" # Inside network interface for "simple"
152 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
154 firewall_simple_oif="ed0" # Outside network interface for "simple"
156 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
158 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
160 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
161 # for "simple" firewall.
162 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
164 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
165 # for "simple" firewall.
166 firewall_myservices="" # List of ports/protocols on which this host
167 # offers services for "workstation" firewall.
168 firewall_allowservices="" # List of IPs which have access to
169 # $firewall_myservices for "workstation"
171 firewall_trusted="" # List of IPs which have full access to this
172 # host for "workstation" firewall.
173 firewall_logdeny="NO" # Set to YES to log default denied incoming
174 # packets for "workstation" firewall.
175 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
176 # for which denied incoming packets are not
177 # logged for "workstation" firewall.
178 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
179 firewall_nat_interface="" # Public interface or IPaddress to use
180 firewall_nat_flags="" # Additional configuration parameters
181 dummynet_enable="NO" # Load the dummynet(4) module
182 ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow
183 ip_portrange_first="NO" # Set first dynamically allocated port
184 ip_portrange_last="NO" # Set last dynamically allocated port
185 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
186 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
187 ike_flags="" # Additional flags for IKE daemon
188 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
189 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
190 natd_program="/sbin/natd" # path to natd, if you want a different one.
191 natd_enable="NO" # Enable natd (if firewall_enable == YES).
192 natd_interface="" # Public interface or IPaddress to use.
193 natd_flags="" # Additional flags for natd.
194 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
195 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
196 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
197 # /usr/src/contrib/ipfilter/rules for examples
198 ipfilter_flags="" # additional flags for ipfilter
199 ipnat_enable="NO" # Set to YES to enable ipnat functionality
200 ipnat_program="/sbin/ipnat" # where the ipnat program lives
201 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
202 ipnat_flags="" # additional flags for ipnat
203 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
204 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
205 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
206 ipfs_enable="NO" # Set to YES to enable saving and restoring
207 # of state tables at shutdown and boot
208 ipfs_program="/sbin/ipfs" # where the ipfs program lives
209 ipfs_flags="" # additional flags for ipfs
210 pf_enable="NO" # Set to YES to enable packet filter (pf)
211 pf_rules="/etc/pf.conf" # rules definition file for pf
212 pf_program="/sbin/pfctl" # where the pfctl program lives
213 pf_flags="" # additional flags for pfctl
214 pflog_enable="NO" # Set to YES to enable packet filter logging
215 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
216 pflog_program="/sbin/pflogd" # where the pflogd program lives
217 pflog_flags="" # additional flags for pflogd
218 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
219 ftpproxy_flags="" # additional flags for ftp-proxy(8)
220 pfsync_enable="NO" # Expose pf state to other hosts for syncing
221 pfsync_syncdev="" # Interface for pfsync to work through
222 pfsync_syncpeer="" # IP address of pfsync peer host
223 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
224 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
225 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
226 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
227 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
228 # NOTE: this violates the TCP specification
229 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
230 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
231 network_interfaces="auto" # List of network interfaces (or "auto").
232 cloned_interfaces="" # List of cloned network interfaces to create.
233 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
234 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
235 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
236 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
237 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
238 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
239 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
240 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
241 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
242 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8)
243 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
245 #autobridge_interfaces="bridge0" # List of bridges to check
246 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
248 # If you have any sppp(4) interfaces above, you might also want to set
249 # the following parameters. Refer to spppcontrol(8) for their meaning.
250 sppp_interfaces="" # List of sppp interfaces.
251 #sppp_interfaces="...0" # example: sppp over ...
252 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
254 # User ppp configuration.
255 ppp_enable="NO" # Start user-ppp (or NO).
256 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
257 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
258 # For details see man page for ppp(8). Default is auto.
259 ppp_nat="YES" # Use PPP's internal network address translation or NO.
260 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
261 ppp_user="root" # Which user to run ppp as
263 # Start multiple instances of ppp at boot time
264 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
265 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
266 #ppp_profile2_nat="NO" # Override nat mode for profile2
267 # profile3 uses default ppp_mode and ppp_nat
269 ### Network daemon (miscellaneous) ###
270 hostapd_enable="NO" # Run hostap daemon.
271 syslogd_enable="YES" # Run syslog daemon (or NO).
272 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
273 syslogd_flags="-s" # Flags to syslogd (if enabled).
274 syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted.
275 altlog_proglist="" # List of chrooted applicatioins in /var
276 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
277 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
278 inetd_flags="-wW -C 60" # Optional flags to inetd
279 iscsid_enable="NO" # iSCSI initiator daemon.
280 iscsictl_enable="NO" # iSCSI initiator autostart.
281 iscsictl_flags="-Aa" # Optional flags to iscsictl.
282 hastd_enable="NO" # Run the HAST daemon (YES/NO).
283 hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
284 hastd_flags="" # Optional flags to hastd.
285 ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
286 local_unbound_enable="NO" # Local caching resolver
287 local_unbound_tls="NO" # Use DNS over TLS
288 blacklistd_enable="NO" # Run blacklistd daemon (YES/NO).
289 blacklistd_flags="" # Optional flags for blacklistd(8).
290 resolv_enable="YES" # Enable resolv / resolvconf
293 # kerberos. Do not run the admin daemons on slave servers
295 kdc_enable="NO" # Run a kerberos 5 KDC (or NO).
296 kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC
297 kdc_flags="" # Additional flags to the kerberos 5 KDC
298 kadmind_enable="NO" # Run kadmind (or NO)
299 kadmind_program="/usr/libexec/kadmind" # path to kadmind
300 kpasswdd_enable="NO" # Run kpasswdd (or NO)
301 kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
302 kfd_enable="NO" # Run kfd (or NO)
303 kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
305 ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon
307 ipropd_master_program="/usr/libexec/ipropd-master"
308 ipropd_master_flags="" # Flags to ipropd-master.
309 ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
310 ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves.
311 ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon
313 ipropd_slave_program="/usr/libexec/ipropd-slave"
314 ipropd_slave_flags="" # Flags to ipropd-slave.
315 ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
316 ipropd_slave_master="" # master node name.
318 gssd_enable="NO" # Run the gssd daemon (or NO).
319 gssd_program="/usr/sbin/gssd" # Path to gssd.
320 gssd_flags="" # Flags for gssd.
322 rwhod_enable="NO" # Run the rwho daemon (or NO).
323 rwhod_flags="" # Flags for rwhod
324 rarpd_enable="NO" # Run rarpd (or NO).
325 rarpd_flags="-a" # Flags to rarpd.
326 bootparamd_enable="NO" # Run bootparamd (or NO).
327 bootparamd_flags="" # Flags to bootparamd
328 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
329 pppoed_provider="*" # Provider and ppp(8) config file entry.
330 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
331 pppoed_interface="fxp0" # The interface that pppoed runs on.
332 sshd_enable="NO" # Enable sshd
333 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
334 sshd_flags="" # Additional flags for sshd.
335 ftpd_enable="NO" # Enable stand-alone ftpd.
336 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
337 ftpd_flags="" # Additional flags to stand-alone ftpd.
339 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
340 amd_enable="NO" # Run amd service with $amd_flags (or NO).
341 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
342 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
343 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
344 autofs_enable="NO" # Run autofs daemons.
345 automount_flags="" # Flags to automount(8) (if autofs enabled).
346 automountd_flags="" # Flags to automountd(8) (if autofs enabled).
347 autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
348 nfs_client_enable="NO" # This host is an NFS client (or NO).
349 nfs_access_cache="60" # Client cache timeout in seconds
350 nfs_server_enable="NO" # This host is an NFS server (or NO).
351 nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
352 nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO).
353 mountd_enable="NO" # Run mountd (or NO).
354 mountd_flags="-r -S" # Flags to mountd (if NFS server enabled).
355 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
356 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
357 nfs_bufpackets="" # bufspace (in packets) for client
358 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
359 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
360 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
361 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
362 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
363 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
364 rpcbind_flags="" # Flags to rpcbind (if enabled).
365 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
366 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
367 keyserv_flags="" # Flags to keyserv (if enabled).
368 nfsv4_server_enable="NO" # Enable support for NFSv4
369 nfscbd_enable="NO" # NFSv4 client side callback daemon
370 nfscbd_flags="" # Flags for nfscbd
371 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
372 nfsuserd_flags="" # Flags for nfsuserd
374 ### Network Time Services options: ###
375 timed_enable="NO" # Run the time daemon (or NO).
376 timed_flags="" # Flags to timed (if enabled).
377 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
378 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
379 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
380 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
381 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
382 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
383 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
384 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
385 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
386 ntpd_flags="" # Additional flags to ntpd
387 ntp_src_leapfile="/etc/ntp/leap-seconds"
388 # Initial source for ntpd leapfile
389 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
390 # Working copy (updated weekly) leapfile
391 ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
392 # Source from which to fetch leapfile
393 ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
394 # e.g. --no-verify-peer
395 ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to
397 ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch
399 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
400 nis_client_enable="NO" # We're an NIS client (or NO).
401 nis_client_flags="" # Flags to ypbind (if enabled).
402 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
403 nis_ypset_flags="" # Flags to ypset (if enabled).
404 nis_server_enable="NO" # We're an NIS server (or NO).
405 nis_server_flags="" # Flags to ypserv (if enabled).
406 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
407 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
408 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
409 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
410 nis_ypldap_enable="NO" # Run ypldap at boot time (or NO).
411 nis_ypldap_flags="" # Flags to ypldap (if enabled).
414 # Be sure to understand the security implications of running SNMP v1/v2
416 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
417 bsnmpd_flags="" # Flags for bsnmpd.
419 ### Network routing options: ###
420 defaultrouter="NO" # Set to default gateway (or NO).
421 static_arp_pairs="" # Set to static ARP list (or leave empty).
422 static_ndp_pairs="" # Set to static NDP list (or leave empty).
423 static_routes="" # Set to static route list (or leave empty).
424 gateway_enable="NO" # Set to YES if this host will be a gateway.
425 routed_enable="NO" # Set to YES to enable a routing daemon.
426 routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
427 routed_flags="-q" # Flags for routing daemon.
428 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
429 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
430 accept_sourceroute="NO" # accept source routed packets to us
433 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
434 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
436 sdpd_enable="NO" # Enable sdpd(8) (or NO)
437 sdpd_control="/var/run/sdp" # sdpd(8) control socket
438 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
439 sdpd_username="nobody" # it initializes
441 bthidd_enable="NO" # Enable bthidd(8) (or NO)
442 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
443 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
444 bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option
446 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
447 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
449 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
450 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
451 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
452 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
454 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
455 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
456 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
457 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
459 ubthidhci_enable="NO" # Switch an USB BT controller present on
460 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
461 #ubthidhci_addr="2" # Check usbconfig list to find the correct
462 # numbers for your system.
464 ### Network link/usability verification options
465 netwait_enable="NO" # Enable rc.d/netwait (or NO)
466 #netwait_ip="" # Wait for ping response from any IP in this list.
467 netwait_timeout="60" # Total number of seconds to perform pings.
468 #netwait_if="" # Wait for active link on each intf in this list.
469 netwait_if_timeout="30" # Total number of seconds to monitor link state.
471 ### Miscellaneous network options: ###
472 icmp_bmcastecho="NO" # respond to broadcast ping packets
474 ### IPv6 options: ###
475 ipv6_network_interfaces="auto" # List of IPv6 network interfaces
476 # (or "auto" or "none").
477 ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
478 # corresponding $ifconfig_IF_ipv6 is
479 # marked as IFDISABLED for security
481 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
482 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
483 ipv6_static_routes="" # Set to static route list (or leave empty).
484 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
485 # route toward loopback interface.
486 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
487 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
488 ipv6_cpe_wanif="NO" # Set to the upstream interface name if this
489 # node will work as a router to forward IPv6
490 # packets not explicitly addressed to itself.
491 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
494 route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
495 route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
496 route6d_flags="" # Flags to IPv6 routing daemon.
497 #route6d_flags="-l" # Example for route6d with only IPv6 site local
499 #route6d_flags="-q" # If you want to run a routing daemon on an end
500 # node, you should stop advertisement.
501 #ipv6_network_interfaces="ed0 ep0" # Examples for router
502 # or static configuration for end node.
503 # Choose correct prefix value.
504 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
505 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
506 ipv6_default_interface="NO" # Default output interface for scoped addrs.
507 # This works only with
508 # ipv6_gateway_enable="NO".
509 rtsol_flags="" # Flags to IPv6 router solicitation.
510 rtsold_enable="NO" # Set to YES to enable an IPv6 router
511 # solicitation daemon.
512 rtsold_flags="-a" # Flags to an IPv6 router solicitation
514 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
515 # advertisement daemon. If set to YES,
516 # this router becomes a possible candidate
517 # IPv6 default router for local subnets.
518 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
519 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
520 # tunneling interface. Specify this entry
521 # to enable 6to4 interface.
522 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
523 # to limit peer addr range. Effective value
525 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
526 # If you like, you can set "AUTO" for this.
527 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
528 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
529 # communication. (like ::ffff:a.b.c.d)
530 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
531 # see /usr/src/contrib/ipfilter/rules
533 ip6addrctl_enable="YES" # Set to YES to enable default address selection
534 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
535 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
536 # (ipv4_prefer, ipv6_prefer, or AUTO)
538 ##############################################################
539 ### System console options #################################
540 ##############################################################
542 keyboard="" # keyboard device to use (default /dev/kbd0).
543 keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
544 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
545 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
546 keychange="NO" # function keys default values (or NO).
547 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
548 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
549 font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
550 font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
551 font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
552 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
553 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
554 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
555 # specifically overriden in rc.conf(5).
556 moused_enable="NO" # Run the mouse daemon.
557 moused_type="auto" # See man page for rc.conf(5) for available settings.
558 moused_port="/dev/psm0" # Set to your mouse port.
559 moused_flags="" # Any additional flags to moused.
560 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
561 # language code table, specify alternative range
562 # start like mousechar_start=3, see vidcontrol(1)
563 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
564 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
566 ##############################################################
567 ### Mail Transfer Agent (MTA) options ######################
568 ##############################################################
570 mta_start_script="/etc/rc.sendmail"
571 # Script to start your chosen MTA, called by /etc/rc.
572 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
573 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
574 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
575 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
576 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
577 sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
578 #sendmail_cert_cn="CN" # CN of the generate certificate
579 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
580 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
581 # Flags for localhost-only MTA
582 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
583 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
584 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
585 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
586 # Flags for sendmail_msp_queue daemon.
587 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
590 ##############################################################
591 ### Miscellaneous administrative options ###################
592 ##############################################################
594 auditd_enable="NO" # Run the audit daemon.
595 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
596 auditd_flags="" # Which options to pass to the audit daemon.
597 auditdistd_enable="NO" # Run the audit daemon.
598 auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
599 auditdistd_flags="" # Which options to pass to the auditdistd daemon.
600 cron_enable="YES" # Run the periodic job daemon.
601 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
602 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
603 cron_flags="" # Which options to pass to the cron daemon.
604 cfumass_enable="NO" # Create default LUN for cfumass(4).
605 cfumass_dir="/var/cfumass" # File to LUN's contents.
606 cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path.
607 lpd_enable="NO" # Run the line printer daemon.
608 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
609 lpd_flags="" # Flags to lpd (if enabled).
610 nscd_enable="NO" # Run the nsswitch caching daemon.
611 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
612 chkprintcap_flags="-d" # Create missing directories by default.
613 dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
614 dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev.
615 dumpdir="/var/crash" # Directory where crash dumps are to be stored
616 savecore_enable="YES" # Extract core from dump devices if any
617 savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
618 # By default, only the 10 most recent kernel dumps
620 service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files.
621 crashinfo_enable="YES" # Automatically generate crash dump summary.
622 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
623 quota_enable="NO" # turn on quotas on startup (or NO).
624 check_quotas="YES" # Check quotas on startup (or NO).
625 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
626 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
627 quotacheck_flags="-a" # Check all file system quotas (if enabled)
628 accounting_enable="NO" # Turn on process accounting (or NO).
629 firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
630 # this file exists. Should be on a R/W filesystem so
631 # the file can be deleted after the boot completes.
633 # Emulation/compatibility services provided by /etc/rc.d/abi
634 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
635 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
636 clear_tmp_enable="NO" # Clear /tmp at startup.
637 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
638 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
639 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
640 # shared library search paths
641 ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
642 # 32-bit compatibility shared library search paths
643 ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat /usr/local/libsoft"
644 # soft float compatibility shared library search paths
645 # Note: temporarily with extra stuff for transition
646 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
647 # a.out shared library search paths
648 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
649 # Local directories with ldconfig configuration files.
650 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
651 # Local directories with 32-bit compatibility ldconfig
652 # configuration files.
653 ldconfig_localsoft_dirs="/usr/local/libdata/ldconfigsoft"
654 # Local directories with soft float compatibility ldconfig
655 # configuration files.
656 kern_securelevel_enable="NO" # kernel security level (see security(7))
657 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
658 # Note that setting securelevel to 0 will result
659 # in the system booting with securelevel set to 1, as
660 # init(8) will raise the level when rc(8) completes.
661 update_motd="YES" # update version info in /etc/motd (or NO)
662 entropy_boot_file="/boot/entropy" # Set to NO to disable very early
663 # (used at early boot time) entropy caching through reboots.
664 entropy_file="/entropy" # Set to NO to disable late (used when going multi-user)
665 # entropy through reboots.
666 # /var/db/entropy-file is preferred if / is not avail.
667 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
668 entropy_save_sz="4096" # Size of the entropy cache files.
669 entropy_save_num="8" # Number of entropy cache files to save.
670 harvest_mask="511" # Entropy device harvests all but the very invasive sources.
671 # (See 'sysctl kern.random.harvest' and random(4))
672 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
673 watchdogd_enable="NO" # Start the software watchdog daemon
674 watchdogd_flags="" # Flags to watchdogd (if enabled)
675 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
677 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
678 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
679 # apply (must be mounted already, i.e. fstab(5))
680 devfs_load_rulesets="YES" # Enable to always load the default rulesets
681 performance_cx_lowest="NONE" # Online CPU idle state
682 performance_cpu_freq="NONE" # Online CPU frequency
683 economy_cx_lowest="Cmax" # Offline CPU idle state
684 economy_cpu_freq="NONE" # Offline CPU frequency
685 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
686 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
687 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
689 newsyslog_enable="YES" # Run newsyslog at startup.
690 newsyslog_flags="-CN" # Newsyslog flags to create marked files
691 mixer_enable="YES" # Run the sound mixer.
692 opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
694 # rctl(8) requires kernel options RACCT and RCTL
695 rctl_enable="YES" # Load rctl(8) rules on boot
696 rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
698 iovctl_files="" # Config files for iovctl(8)
700 ##############################################################
701 ### Jail Configuration (see rc.conf(5) manual page) ##########
702 ##############################################################
703 jail_enable="NO" # Set to NO to disable starting of any jails
704 jail_conf="/etc/jail.conf" # Configuration file for jail(8)
705 jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration
706 jail_parallel_start="NO" # Start jails in the background
707 jail_list="" # Space separated list of names of jails
708 jail_reverse_stop="NO" # Stop jails in reverse order
710 ##############################################################
711 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
712 ### scripts to source rc_conf_files overrides safely. ##
713 ##############################################################
715 if [ -z "${source_rc_confs_defined}" ]; then
716 source_rc_confs_defined=yes
718 local i sourced_files
719 for i in ${rc_conf_files}; do
720 case ${sourced_files} in
724 sourced_files="${sourced_files}:$i:"
731 # Re-do process to pick up [possibly] redefined $rc_conf_files
732 for i in ${rc_conf_files}; do
733 case ${sourced_files} in
737 sourced_files="${sourced_files}:$i:"
747 # Allow vendors to override FreeBSD defaults in /etc/default/rc.conf
748 # without the need to carefully manage /etc/rc.conf.
749 if [ -r /etc/defaults/vendor.conf ]; then
750 . /etc/defaults/vendor.conf