libexec/rc/rc.subr

   1 # $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $
   2 # $FreeBSD$
   3 #
   4 # Copyright (c) 1997-2004 The NetBSD Foundation, Inc.
   5 # All rights reserved.
   6 #
   7 # This code is derived from software contributed to The NetBSD Foundation
   8 # by Luke Mewburn.
   9 #
  10 # Redistribution and use in source and binary forms, with or without
  11 # modification, are permitted provided that the following conditions
  12 # are met:
  13 # 1. Redistributions of source code must retain the above copyright
  14 #    notice, this list of conditions and the following disclaimer.
  15 # 2. Redistributions in binary form must reproduce the above copyright
  16 #    notice, this list of conditions and the following disclaimer in the
  17 #    documentation and/or other materials provided with the distribution.
  18 #
  19 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  20 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  21 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  22 # PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  23 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 # POSSIBILITY OF SUCH DAMAGE.
  30 #
  31 # rc.subr
  32 #       functions used by various rc scripts
  33 #
  34
  35 : ${RC_PID:=$$}; export RC_PID
  36
  37 #
  38 #       Operating System dependent/independent variables
  39 #
  40
  41 if [ -n "${_rc_subr_loaded}" ]; then
  42         return
  43 fi
  44
  45 _rc_subr_loaded="YES"
  46
  47 SYSCTL="/sbin/sysctl"
  48 SYSCTL_N="${SYSCTL} -n"
  49 SYSCTL_W="${SYSCTL}"
  50 PROTECT="/usr/bin/protect"
  51 ID="/usr/bin/id"
  52 IDCMD="if [ -x $ID ]; then $ID -un; fi"
  53 PS="/bin/ps -ww"
  54 JID=0
  55 # rc_service provides the path to the service script that we are executing.
  56 # This is not being set here in an execution context, necessarily, so it's
  57 # really just a reasonable guess, and it will get overwritten later if
  58 # we are executing from some other means than direct execution by service(8)
  59 # or manual invocation of the service script.  The prime example of this is
  60 # during system startup, all rc scripts will be invoked via /etc/rc, so
  61 # run_rc_script will overwrite rc_service with the file being sourced.
  62 rc_service="$0"
  63
  64 #
  65 #       functions
  66 #       ---------
  67
  68 # list_vars pattern
  69 #       List variables matching glob pattern.
  70 #
  71 list_vars()
  72 {
  73         # Localize 'set' option below.
  74         local -
  75         local IFS=$'\n' line varname
  76
  77         # Disable path expansion in unquoted 'for' parameters below.
  78         set -o noglob
  79
  80         for line in $(set); do
  81                 varname="${line%%=*}"
  82
  83                 case "$varname" in
  84                 "$line"|*[!a-zA-Z0-9_]*)
  85                         continue
  86                         ;;
  87                 $1)
  88                         echo $varname
  89                         ;;
  90                 esac
  91         done
  92 }
  93
  94 # set_rcvar [var] [defval] [desc]
  95 #
  96 #       Echo or define a rc.conf(5) variable name.  Global variable
  97 #       $rcvars is used.
  98 #
  99 #       If no argument is specified, echo "${name}_enable".
 100 #
 101 #       If only a var is specified, echo "${var}_enable".
 102 #
 103 #       If var and defval are specified, the ${var} is defined as
 104 #       rc.conf(5) variable and the default value is ${defvar}.  An
 105 #       optional argument $desc can also be specified to add a
 106 #       description for that.
 107 #
 108 set_rcvar()
 109 {
 110         local _var
 111
 112         case $# in
 113         0)      echo ${name}_enable ;;
 114         1)      echo ${1}_enable ;;
 115         *)
 116                 debug "set_rcvar: \$$1=$2 is added" \
 117                     " as a rc.conf(5) variable."
 118                 _var=$1
 119                 rcvars="${rcvars# } $_var"
 120                 eval ${_var}_defval=\"$2\"
 121                 shift 2
 122                 eval ${_var}_desc=\"$*\"
 123         ;;
 124         esac
 125 }
 126
 127 # set_rcvar_obsolete oldvar [newvar] [msg]
 128 #       Define obsolete variable.
 129 #       Global variable $rcvars_obsolete is used.
 130 #
 131 set_rcvar_obsolete()
 132 {
 133         local _var
 134         _var=$1
 135         debug "set_rcvar_obsolete: \$$1(old) -> \$$2(new) is defined"
 136
 137         rcvars_obsolete="${rcvars_obsolete# } $1"
 138         eval ${1}_newvar=\"$2\"
 139         shift 2
 140         eval ${_var}_obsolete_msg=\"$*\"
 141 }
 142
 143 #
 144 # force_depend script [rcvar]
 145 #       Force a service to start. Intended for use by services
 146 #       to resolve dependency issues.
 147 #       $1 - filename of script, in /etc/rc.d, to run
 148 #       $2 - name of the script's rcvar (minus the _enable)
 149 #
 150 force_depend()
 151 {
 152         local _depend _dep_rcvar
 153
 154         _depend="$1"
 155         _dep_rcvar="${2:-$1}_enable"
 156
 157         [ -n "$rc_fast" ] && ! checkyesno always_force_depends &&
 158             checkyesno $_dep_rcvar && return 0
 159
 160         /etc/rc.d/${_depend} forcestatus >/dev/null 2>&1 && return 0
 161
 162         info "${name} depends on ${_depend}, which will be forced to start."
 163         if ! /etc/rc.d/${_depend} forcestart; then
 164                 warn "Unable to force ${_depend}. It may already be running."
 165                 return 1
 166         fi
 167 }
 168
 169 #
 170 # checkyesno var
 171 #       Test $1 variable, and warn if not set to YES or NO.
 172 #       Return 0 if it's "yes" (et al), nonzero otherwise.
 173 #
 174 checkyesno()
 175 {
 176         eval _value=\$${1}
 177         debug "checkyesno: $1 is set to $_value."
 178         case $_value in
 179
 180                 #       "yes", "true", "on", or "1"
 181         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 182                 return 0
 183                 ;;
 184
 185                 #       "no", "false", "off", or "0"
 186         [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
 187                 return 1
 188                 ;;
 189         *)
 190                 warn "\$${1} is not set properly - see rc.conf(5)."
 191                 return 1
 192                 ;;
 193         esac
 194 }
 195
 196 #
 197 # reverse_list list
 198 #       print the list in reverse order
 199 #
 200 reverse_list()
 201 {
 202         _revlist=
 203         for _revfile; do
 204                 _revlist="$_revfile $_revlist"
 205         done
 206         echo $_revlist
 207 }
 208
 209 # stop_boot always
 210 #       If booting directly to multiuser or $always is enabled,
 211 #       send SIGTERM to the parent (/etc/rc) to abort the boot.
 212 #       Otherwise just exit.
 213 #
 214 stop_boot()
 215 {
 216         local always
 217
 218         case $1 in
 219                 #       "yes", "true", "on", or "1"
 220         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 221                 always=true
 222                 ;;
 223         *)
 224                 always=false
 225                 ;;
 226         esac
 227         if [ "$autoboot" = yes -o "$always" = true ]; then
 228                 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!"
 229                 kill -TERM ${RC_PID}
 230         fi
 231         exit 1
 232 }
 233
 234 #
 235 # mount_critical_filesystems type
 236 #       Go through the list of critical filesystems as provided in
 237 #       the rc.conf(5) variable $critical_filesystems_${type}, checking
 238 #       each one to see if it is mounted, and if it is not, mounting it.
 239 #
 240 mount_critical_filesystems()
 241 {
 242         eval _fslist=\$critical_filesystems_${1}
 243         for _fs in $_fslist; do
 244                 mount | (
 245                         _ismounted=false
 246                         while read what _on on _type type; do
 247                                 if [ $on = $_fs ]; then
 248                                         _ismounted=true
 249                                 fi
 250                         done
 251                         if $_ismounted; then
 252                                 :
 253                         else
 254                                 mount $_fs >/dev/null 2>&1
 255                         fi
 256                 )
 257         done
 258 }
 259
 260 #
 261 # check_pidfile pidfile procname [interpreter]
 262 #       Parses the first line of pidfile for a PID, and ensures
 263 #       that the process is running and matches procname.
 264 #       Prints the matching PID upon success, nothing otherwise.
 265 #       interpreter is optional; see _find_processes() for details.
 266 #
 267 check_pidfile()
 268 {
 269         _pidfile=$1
 270         _procname=$2
 271         _interpreter=$3
 272         if [ -z "$_pidfile" -o -z "$_procname" ]; then
 273                 err 3 'USAGE: check_pidfile pidfile procname [interpreter]'
 274         fi
 275         if [ ! -f $_pidfile ]; then
 276                 debug "pid file ($_pidfile): not readable."
 277                 return
 278         fi
 279         read _pid _junk < $_pidfile
 280         if [ -z "$_pid" ]; then
 281                 debug "pid file ($_pidfile): no pid in file."
 282                 return
 283         fi
 284         _find_processes $_procname ${_interpreter:-.} '-p '"$_pid"
 285 }
 286
 287 #
 288 # check_process procname [interpreter]
 289 #       Ensures that a process (or processes) named procname is running.
 290 #       Prints a list of matching PIDs.
 291 #       interpreter is optional; see _find_processes() for details.
 292 #
 293 check_process()
 294 {
 295         _procname=$1
 296         _interpreter=$2
 297         if [ -z "$_procname" ]; then
 298                 err 3 'USAGE: check_process procname [interpreter]'
 299         fi
 300         _find_processes $_procname ${_interpreter:-.} '-ax'
 301 }
 302
 303 #
 304 # _find_processes procname interpreter psargs
 305 #       Search for procname in the output of ps generated by psargs.
 306 #       Prints the PIDs of any matching processes, space separated.
 307 #
 308 #       If interpreter == ".", check the following variations of procname
 309 #       against the first word of each command:
 310 #               procname
 311 #               `basename procname`
 312 #               `basename procname` + ":"
 313 #               "(" + `basename procname` + ")"
 314 #               "[" + `basename procname` + "]"
 315 #
 316 #       If interpreter != ".", read the first line of procname, remove the
 317 #       leading #!, normalise whitespace, append procname, and attempt to
 318 #       match that against each command, either as is, or with extra words
 319 #       at the end.  As an alternative, to deal with interpreted daemons
 320 #       using perl, the basename of the interpreter plus a colon is also
 321 #       tried as the prefix to procname.
 322 #
 323 _find_processes()
 324 {
 325         if [ $# -ne 3 ]; then
 326                 err 3 'USAGE: _find_processes procname interpreter psargs'
 327         fi
 328         _procname=$1
 329         _interpreter=$2
 330         _psargs=$3
 331
 332         _pref=
 333         if [ $_interpreter != "." ]; then       # an interpreted script
 334                 _script="${_chroot}${_chroot:+/}$_procname"
 335                 if [ -r "$_script" ]; then
 336                         read _interp < $_script # read interpreter name
 337                         case "$_interp" in
 338                         \#!*)
 339                                 _interp=${_interp#\#!}  # strip #!
 340                                 set -- $_interp
 341                                 case $1 in
 342                                 */bin/env)
 343                                         shift   # drop env to get real name
 344                                         ;;
 345                                 esac
 346                                 if [ $_interpreter != $1 ]; then
 347                                         warn "\$command_interpreter $_interpreter != $1"
 348                                 fi
 349                                 ;;
 350                         *)
 351                                 warn "no shebang line in $_script"
 352                                 set -- $_interpreter
 353                                 ;;
 354                         esac
 355                 else
 356                         warn "cannot read shebang line from $_script"
 357                         set -- $_interpreter
 358                 fi
 359                 _interp="$* $_procname"         # cleanup spaces, add _procname
 360                 _interpbn=${1##*/}
 361                 _fp_args='_argv'
 362                 _fp_match='case "$_argv" in
 363                     ${_interp}|"${_interp} "*|"[${_interpbn}]"|"${_interpbn}: ${_procname}"*)'
 364         else                                    # a normal daemon
 365                 _procnamebn=${_procname##*/}
 366                 _fp_args='_arg0 _argv'
 367                 _fp_match='case "$_arg0" in
 368                     $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")'
 369         fi
 370
 371         _proccheck="\
 372                 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' |
 373                 while read _npid _jid '"$_fp_args"'; do
 374                         '"$_fp_match"'
 375                                 if [ "$JID" -eq "$_jid" ];
 376                                 then echo -n "$_pref$_npid";
 377                                 _pref=" ";
 378                                 fi
 379                                 ;;
 380                         esac
 381                 done'
 382
 383 #       debug "in _find_processes: proccheck is ($_proccheck)."
 384         eval $_proccheck
 385 }
 386
 387 # sort_lite [-b] [-n] [-k POS] [-t SEP]
 388 #       A lite version of sort(1) (supporting a few options) that can be used
 389 #       before the real sort(1) is available (e.g., in scripts that run prior
 390 #       to mountcritremote). Requires only shell built-in functionality.
 391 #
 392 sort_lite()
 393 {
 394         local funcname=sort_lite
 395         local sort_sep="$IFS" sort_ignore_leading_space=
 396         local sort_field=0 sort_strict_fields= sort_numeric=
 397         local nitems=0 skip_leading=0 trim=
 398
 399         local OPTIND flag
 400         while getopts bnk:t: flag; do
 401                 case "$flag" in
 402                 b) sort_ignore_leading_space=1 ;;
 403                 n) sort_numeric=1 sort_ignore_leading_space=1 ;;
 404                 k) sort_field="${OPTARG%%,*}" ;; # only up to first comma
 405                         # NB: Unlike sort(1) only one POS allowed
 406                 t) sort_sep="$OPTARG"
 407                    if [ ${#sort_sep} -gt 1 ]; then
 408                         echo "$funcname: multi-character tab \`$sort_sep'" >&2
 409                         return 1
 410                    fi
 411                    sort_strict_fields=1
 412                    ;;
 413                 \?) return 1 ;;
 414                 esac
 415         done
 416         shift $(( $OPTIND - 1 ))
 417
 418         # Create transformation pattern to trim leading text if desired
 419         case "$sort_field" in
 420         ""|[!0-9]*|*[!0-9.]*)
 421                 echo "$funcname: invalid sort field \`$sort_field'" >&2
 422                 return 1
 423                 ;;
 424         *.*)
 425                 skip_leading=${sort_field#*.} sort_field=${sort_field%%.*}
 426                 while [ ${skip_leading:-0} -gt 1 ] 2> /dev/null; do
 427                         trim="$trim?" skip_leading=$(( $skip_leading - 1 ))
 428                 done
 429         esac
 430
 431         # Copy input to series of local numbered variables
 432         # NB: IFS of NULL preserves leading whitespace
 433         local LINE
 434         while IFS= read -r LINE || [ "$LINE" ]; do
 435                 nitems=$(( $nitems + 1 ))
 436                 local src_$nitems="$LINE"
 437         done
 438
 439         #
 440         # Sort numbered locals using insertion sort
 441         #
 442         local curitem curitem_orig curitem_mod curitem_haskey
 443         local dest dest_orig dest_mod dest_haskey
 444         local d gt n
 445         local i=1
 446         while [ $i -le $nitems ]; do
 447                 curitem_haskey=1 # Assume sort field (-k POS) exists
 448                 eval curitem=\"\$src_$i\"
 449                 curitem_mod="$curitem" # for modified comparison
 450                 curitem_orig="$curitem" # for original comparison
 451
 452                 # Trim leading whitespace if desired
 453                 if [ "$sort_ignore_leading_space" ]; then
 454                         while case "$curitem_orig" in
 455                                 [$IFS]*) : ;; *) false; esac
 456                         do
 457                                 curitem_orig="${curitem_orig#?}"
 458                         done
 459                         curitem_mod="$curitem_orig"
 460                 fi
 461
 462                 # Shift modified comparison value if sort field (-k POS) is > 1
 463                 n=$sort_field
 464                 while [ $n -gt 1 ]; do
 465                         case "$curitem_mod" in
 466                         *[$sort_sep]*)
 467                                 # Cut text up-to (and incl.) first separator
 468                                 curitem_mod="${curitem_mod#*[$sort_sep]}"
 469
 470                                 # Skip NULLs unless strict field splitting
 471                                 [ "$sort_strict_fields" ] ||
 472                                         [ "${curitem_mod%%[$sort_sep]*}" ] ||
 473                                         [ $n -eq 2 ] ||
 474                                         continue
 475                                 ;;
 476                         *)
 477                                 # Asked for a field that doesn't exist
 478                                 curitem_haskey= break
 479                         esac
 480                         n=$(( $n - 1 ))
 481                 done
 482
 483                 # Trim trailing words if sort field >= 1
 484                 [ $sort_field -ge 1 -a "$sort_numeric" ] &&
 485                         curitem_mod="${curitem_mod%%[$sort_sep]*}"
 486
 487                 # Apply optional trim (-k POS.TRIM) to cut leading characters
 488                 curitem_mod="${curitem_mod#$trim}"
 489
 490                 # Determine the type of modified comparison to use initially
 491                 # NB: Prefer numerical if requested but fallback to standard
 492                 case "$curitem_mod" in
 493                 ""|[!0-9]*) # NULL or begins with non-number
 494                         gt=">"
 495                         [ "$sort_numeric" ] && curitem_mod=0
 496                         ;;
 497                 *)
 498                         if [ "$sort_numeric" ]; then
 499                                 gt="-gt"
 500                                 curitem_mod="${curitem_mod%%[!0-9]*}"
 501                                         # NB: trailing non-digits removed
 502                                         # otherwise numeric comparison fails
 503                         else
 504                                 gt=">"
 505                         fi
 506                 esac
 507
 508                 # If first time through, short-circuit below position-search
 509                 if [ $i -le 1 ]; then
 510                         d=0
 511                 else
 512                         d=1
 513                 fi
 514
 515                 #
 516                 # Find appropriate element position
 517                 #
 518                 while [ $d -gt 0 ]
 519                 do
 520                         dest_haskey=$curitem_haskey
 521                         eval dest=\"\$dest_$d\"
 522                         dest_mod="$dest" # for modified comparison
 523                         dest_orig="$dest" # for original comparison
 524
 525                         # Trim leading whitespace if desired
 526                         if [ "$sort_ignore_leading_space" ]; then
 527                                 while case "$dest_orig" in
 528                                         [$IFS]*) : ;; *) false; esac
 529                                 do
 530                                         dest_orig="${dest_orig#?}"
 531                                 done
 532                                 dest_mod="$dest_orig"
 533                         fi
 534
 535                         # Shift modified value if sort field (-k POS) is > 1
 536                         n=$sort_field
 537                         while [ $n -gt 1 ]; do
 538                                 case "$dest_mod" in
 539                                 *[$sort_sep]*)
 540                                         # Cut text up-to (and incl.) 1st sep
 541                                         dest_mod="${dest_mod#*[$sort_sep]}"
 542
 543                                         # Skip NULLs unless strict fields
 544                                         [ "$sort_strict_fields" ] ||
 545                                             [ "${dest_mod%%[$sort_sep]*}" ] ||
 546                                             [ $n -eq 2 ] ||
 547                                             continue
 548                                         ;;
 549                                 *)
 550                                         # Asked for a field that doesn't exist
 551                                         dest_haskey= break
 552                                 esac
 553                                 n=$(( $n - 1 ))
 554                         done
 555
 556                         # Trim trailing words if sort field >= 1
 557                         [ $sort_field -ge 1 -a "$sort_numeric" ] &&
 558                                 dest_mod="${dest_mod%%[$sort_sep]*}"
 559
 560                         # Apply optional trim (-k POS.TRIM), cut leading chars
 561                         dest_mod="${dest_mod#$trim}"
 562
 563                         # Determine type of modified comparison to use
 564                         # NB: Prefer numerical if requested, fallback to std
 565                         case "$dest_mod" in
 566                         ""|[!0-9]*) # NULL or begins with non-number
 567                                 gt=">"
 568                                 [ "$sort_numeric" ] && dest_mod=0
 569                                 ;;
 570                         *)
 571                                 if [ "$sort_numeric" ]; then
 572                                         gt="-gt"
 573                                         dest_mod="${dest_mod%%[!0-9]*}"
 574                                                 # NB: kill trailing non-digits
 575                                                 # for numeric comparison safety
 576                                 else
 577                                         gt=">"
 578                                 fi
 579                         esac
 580
 581                         # Break if we've found the proper element position
 582                         if [ "$curitem_haskey" -a "$dest_haskey" ]; then
 583                                 if [ "$dest_mod" = "$curitem_mod" ]; then
 584                                         [ "$dest_orig" ">" "$curitem_orig" ] &&
 585                                                 break
 586                                 elif [ "$dest_mod" $gt "$curitem_mod" ] \
 587                                         2> /dev/null
 588                                 then
 589                                         break
 590                                 fi
 591                         else
 592                                 [ "$dest_orig" ">" "$curitem_orig" ] && break
 593                         fi
 594
 595                         # Break if we've hit the end
 596                         [ $d -ge $i ] && break
 597
 598                         d=$(( $d + 1 ))
 599                 done
 600
 601                 # Shift remaining positions forward, making room for new item
 602                 n=$i
 603                 while [ $n -ge $d ]; do
 604                         # Shift destination item forward one placement
 605                         eval dest_$(( $n + 1 ))=\"\$dest_$n\"
 606                         n=$(( $n - 1 ))
 607                 done
 608
 609                 # Place the element
 610                 if [ $i -eq 1 ]; then
 611                         local dest_1="$curitem"
 612                 else
 613                         local dest_$d="$curitem"
 614                 fi
 615
 616                 i=$(( $i + 1 ))
 617         done
 618
 619         # Print sorted results
 620         d=1
 621         while [ $d -le $nitems ]; do
 622                 eval echo \"\$dest_$d\"
 623                 d=$(( $d + 1 ))
 624         done
 625 }
 626
 627 #
 628 # wait_for_pids pid [pid ...]
 629 #       spins until none of the pids exist
 630 #
 631 wait_for_pids()
 632 {
 633         local _list _prefix _nlist _j
 634
 635         _list="$@"
 636         if [ -z "$_list" ]; then
 637                 return
 638         fi
 639         _prefix=
 640         while true; do
 641                 _nlist="";
 642                 for _j in $_list; do
 643                         if kill -0 $_j 2>/dev/null; then
 644                                 _nlist="${_nlist}${_nlist:+ }$_j"
 645                                 [ -n "$_prefix" ] && sleep 1
 646                         fi
 647                 done
 648                 if [ -z "$_nlist" ]; then
 649                         break
 650                 fi
 651                 _list=$_nlist
 652                 echo -n ${_prefix:-"Waiting for PIDS: "}$_list
 653                 _prefix=", "
 654                 pwait $_list 2>/dev/null
 655         done
 656         if [ -n "$_prefix" ]; then
 657                 echo "."
 658         fi
 659 }
 660
 661 #
 662 # get_pidfile_from_conf string file
 663 #
 664 #       Takes a string to search for in the specified file.
 665 #       Ignores lines with traditional comment characters.
 666 #
 667 # Example:
 668 #
 669 # if get_pidfile_from_conf string file; then
 670 #       pidfile="$_pidfile_from_conf"
 671 # else
 672 #       pidfile='appropriate default'
 673 # fi
 674 #
 675 get_pidfile_from_conf()
 676 {
 677         if [ -z "$1" -o -z "$2" ]; then
 678                 err 3 "USAGE: get_pidfile_from_conf string file ($name)"
 679         fi
 680
 681         local string file line
 682
 683         string="$1" ; file="$2"
 684
 685         if [ ! -s "$file" ]; then
 686                 err 3 "get_pidfile_from_conf: $file does not exist ($name)"
 687         fi
 688
 689         while read line; do
 690                 case "$line" in
 691                 *[#\;]*${string}*)      continue ;;
 692                 *${string}*)            break ;;
 693                 esac
 694         done < $file
 695
 696         if [ -n "$line" ]; then
 697                 line=${line#*/}
 698                 _pidfile_from_conf="/${line%%[\"\;]*}"
 699         else
 700                 return 1
 701         fi
 702 }
 703
 704 #
 705 # check_startmsgs
 706 #       If rc_quiet is set (usually as a result of using faststart at
 707 #       boot time) check if rc_startmsgs is enabled.
 708 #
 709 check_startmsgs()
 710 {
 711         if [ -n "$rc_quiet" ]; then
 712                 checkyesno rc_startmsgs
 713         else
 714                 return 0
 715         fi
 716 }
 717
 718 #
 719 # run_rc_command argument
 720 #       Search for argument in the list of supported commands, which is:
 721 #               "start stop restart rcvar status poll ${extra_commands}"
 722 #       If there's a match, run ${argument}_cmd or the default method
 723 #       (see below).
 724 #
 725 #       If argument has a given prefix, then change the operation as follows:
 726 #               Prefix  Operation
 727 #               ------  ---------
 728 #               fast    Skip the pid check, and set rc_fast=yes, rc_quiet=yes
 729 #               force   Set ${rcvar} to YES, and set rc_force=yes
 730 #               one     Set ${rcvar} to YES
 731 #               quiet   Don't output some diagnostics, and set rc_quiet=yes
 732 #
 733 #       The following globals are used:
 734 #
 735 #       Name            Needed  Purpose
 736 #       ----            ------  -------
 737 #       name            y       Name of script.
 738 #
 739 #       command         n       Full path to command.
 740 #                               Not needed if ${rc_arg}_cmd is set for
 741 #                               each keyword.
 742 #
 743 #       command_args    n       Optional args/shell directives for command.
 744 #
 745 #       command_interpreter n   If not empty, command is interpreted, so
 746 #                               call check_{pidfile,process}() appropriately.
 747 #
 748 #       desc            n       Description of script.
 749 #
 750 #       extra_commands  n       List of extra commands supported.
 751 #
 752 #       pidfile         n       If set, use check_pidfile $pidfile $command,
 753 #                               otherwise use check_process $command.
 754 #                               In either case, only check if $command is set.
 755 #
 756 #       procname        n       Process name to check for instead of $command.
 757 #
 758 #       rcvar           n       This is checked with checkyesno to determine
 759 #                               if the action should be run.
 760 #
 761 #       ${name}_program n       Full path to command.
 762 #                               Meant to be used in /etc/rc.conf to override
 763 #                               ${command}.
 764 #
 765 #       ${name}_chroot  n       Directory to chroot to before running ${command}
 766 #                               Requires /usr to be mounted.
 767 #
 768 #       ${name}_chdir   n       Directory to cd to before running ${command}
 769 #                               (if not using ${name}_chroot).
 770 #
 771 #       ${name}_flags   n       Arguments to call ${command} with.
 772 #                               NOTE:   $flags from the parent environment
 773 #                                       can be used to override this.
 774 #
 775 #       ${name}_env     n       Environment variables to run ${command} with.
 776 #
 777 #       ${name}_env_file n      File to source variables to run ${command} with.
 778 #
 779 #       ${name}_fib     n       Routing table number to run ${command} with.
 780 #
 781 #       ${name}_nice    n       Nice level to run ${command} at.
 782 #
 783 #       ${name}_oomprotect n    Don't kill ${command} when swap space is exhausted.
 784 #
 785 #       ${name}_user    n       User to run ${command} as, using su(1) if not
 786 #                               using ${name}_chroot.
 787 #                               Requires /usr to be mounted.
 788 #
 789 #       ${name}_group   n       Group to run chrooted ${command} as.
 790 #                               Requires /usr to be mounted.
 791 #
 792 #       ${name}_groups  n       Comma separated list of supplementary groups
 793 #                               to run the chrooted ${command} with.
 794 #                               Requires /usr to be mounted.
 795 #
 796 #       ${name}_prepend n       Command added before ${command}.
 797 #
 798 #       ${name}_login_class n   Login class to use, else "daemon".
 799 #
 800 #       ${name}_limits  n       limits(1) to apply to ${command}.
 801 #
 802 #       ${rc_arg}_cmd   n       If set, use this as the method when invoked;
 803 #                               Otherwise, use default command (see below)
 804 #
 805 #       ${rc_arg}_precmd n      If set, run just before performing the
 806 #                               ${rc_arg}_cmd method in the default
 807 #                               operation (i.e, after checking for required
 808 #                               bits and process (non)existence).
 809 #                               If this completes with a non-zero exit code,
 810 #                               don't run ${rc_arg}_cmd.
 811 #
 812 #       ${rc_arg}_postcmd n     If set, run just after performing the
 813 #                               ${rc_arg}_cmd method, if that method
 814 #                               returned a zero exit code.
 815 #
 816 #       required_dirs   n       If set, check for the existence of the given
 817 #                               directories before running a (re)start command.
 818 #
 819 #       required_files  n       If set, check for the readability of the given
 820 #                               files before running a (re)start command.
 821 #
 822 #       required_modules n      If set, ensure the given kernel modules are
 823 #                               loaded before running a (re)start command.
 824 #                               The check and possible loads are actually
 825 #                               done after start_precmd so that the modules
 826 #                               aren't loaded in vain, should the precmd
 827 #                               return a non-zero status to indicate a error.
 828 #                               If a word in the list looks like "foo:bar",
 829 #                               "foo" is the KLD file name and "bar" is the
 830 #                               module name.  If a word looks like "foo~bar",
 831 #                               "foo" is the KLD file name and "bar" is a
 832 #                               egrep(1) pattern matching the module name.
 833 #                               Otherwise the module name is assumed to be
 834 #                               the same as the KLD file name, which is most
 835 #                               common.  See load_kld().
 836 #
 837 #       required_vars   n       If set, perform checkyesno on each of the
 838 #                               listed variables before running the default
 839 #                               (re)start command.
 840 #
 841 #       Default behaviour for a given argument, if no override method is
 842 #       provided:
 843 #
 844 #       Argument        Default behaviour
 845 #       --------        -----------------
 846 #       start           if !running && checkyesno ${rcvar}
 847 #                               ${command}
 848 #
 849 #       stop            if ${pidfile}
 850 #                               rc_pid=$(check_pidfile $pidfile $command)
 851 #                       else
 852 #                               rc_pid=$(check_process $command)
 853 #                       kill $sig_stop $rc_pid
 854 #                       wait_for_pids $rc_pid
 855 #                       ($sig_stop defaults to TERM.)
 856 #
 857 #       reload          Similar to stop, except use $sig_reload instead,
 858 #                       and doesn't wait_for_pids.
 859 #                       $sig_reload defaults to HUP.
 860 #                       Note that `reload' isn't provided by default,
 861 #                       it should be enabled via $extra_commands.
 862 #
 863 #       restart         Run `stop' then `start'.
 864 #
 865 #       status          Show if ${command} is running, etc.
 866 #
 867 #       poll            Wait for ${command} to exit.
 868 #
 869 #       rcvar           Display what rc.conf variable is used (if any).
 870 #
 871 #       enabled         Return true if the service is enabled.
 872 #
 873 #       describe        Show the service's description
 874 #
 875 #       extracommands   Show the service's extra commands
 876 #
 877 #       Variables available to methods, and after run_rc_command() has
 878 #       completed:
 879 #
 880 #       Variable        Purpose
 881 #       --------        -------
 882 #       rc_arg          Argument to command, after fast/force/one processing
 883 #                       performed
 884 #
 885 #       rc_flags        Flags to start the default command with.
 886 #                       Defaults to ${name}_flags, unless overridden
 887 #                       by $flags from the environment.
 888 #                       This variable may be changed by the precmd method.
 889 #
 890 #       rc_service      Path to the service being executed, in case the service
 891 #                       needs to re-invoke itself.
 892 #
 893 #       rc_pid          PID of command (if appropriate)
 894 #
 895 #       rc_fast         Not empty if "fast" was provided (q.v.)
 896 #
 897 #       rc_force        Not empty if "force" was provided (q.v.)
 898 #
 899 #       rc_quiet        Not empty if "quiet" was provided
 900 #
 901 #
 902 run_rc_command()
 903 {
 904         _return=0
 905         rc_arg=$1
 906         if [ -z "$name" ]; then
 907                 err 3 'run_rc_command: $name is not set.'
 908         fi
 909
 910         # Don't repeat the first argument when passing additional command-
 911         # line arguments to the command subroutines.
 912         #
 913         shift 1
 914         rc_extra_args="$*"
 915
 916         _rc_prefix=
 917         case "$rc_arg" in
 918         fast*)                          # "fast" prefix; don't check pid
 919                 rc_arg=${rc_arg#fast}
 920                 rc_fast=yes
 921                 rc_quiet=yes
 922                 ;;
 923         force*)                         # "force" prefix; always run
 924                 rc_force=yes
 925                 _rc_prefix=force
 926                 rc_arg=${rc_arg#${_rc_prefix}}
 927                 if [ -n "${rcvar}" ]; then
 928                         eval ${rcvar}=YES
 929                 fi
 930                 ;;
 931         one*)                           # "one" prefix; set ${rcvar}=yes
 932                 _rc_prefix=one
 933                 rc_arg=${rc_arg#${_rc_prefix}}
 934                 if [ -n "${rcvar}" ]; then
 935                         eval ${rcvar}=YES
 936                 fi
 937                 ;;
 938         quiet*)                         # "quiet" prefix; omit some messages
 939                 _rc_prefix=quiet
 940                 rc_arg=${rc_arg#${_rc_prefix}}
 941                 rc_quiet=yes
 942                 ;;
 943         esac
 944
 945         eval _override_command=\$${name}_program
 946         command=${_override_command:-$command}
 947
 948         _keywords="start stop restart rcvar enable disable delete enabled describe extracommands $extra_commands"
 949         rc_pid=
 950         _pidcmd=
 951         _procname=${procname:-${command}}
 952
 953                                         # setup pid check command
 954         if [ -n "$_procname" ]; then
 955                 if [ -n "$pidfile" ]; then
 956                         _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')'
 957                 else
 958                         _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')'
 959                 fi
 960                 _keywords="${_keywords} status poll"
 961         fi
 962
 963         if [ -z "$rc_arg" ]; then
 964                 rc_usage $_keywords
 965         fi
 966
 967         if [ "$rc_arg" = "enabled" ] ; then
 968                 checkyesno ${rcvar}
 969                 return $?
 970         fi
 971
 972         if [ -n "$flags" ]; then        # allow override from environment
 973                 rc_flags=$flags
 974         else
 975                 eval rc_flags=\$${name}_flags
 976         fi
 977         eval _chdir=\$${name}_chdir     _chroot=\$${name}_chroot \
 978             _nice=\$${name}_nice        _user=\$${name}_user \
 979             _group=\$${name}_group      _groups=\$${name}_groups \
 980             _fib=\$${name}_fib          _env=\$${name}_env \
 981             _prepend=\$${name}_prepend  _login_class=\${${name}_login_class:-daemon} \
 982             _limits=\$${name}_limits    _oomprotect=\$${name}_oomprotect \
 983             _env_file=\$${name}_env_file
 984
 985         if [ -n "$_env_file" ] && [ -r "${_env_file}" ]; then   # load env from file
 986                 set -a
 987                 . $_env_file
 988                 set +a
 989         fi
 990
 991         if [ -n "$_user" ]; then        # unset $_user if running as that user
 992                 if [ "$_user" = "$(eval $IDCMD)" ]; then
 993                         unset _user
 994                 fi
 995         fi
 996
 997         [ -z "$autoboot" ] && eval $_pidcmd     # determine the pid if necessary
 998
 999         for _elem in $_keywords; do
1000                 if [ "$_elem" != "$rc_arg" ]; then
1001                         continue
1002                 fi
1003                                         # if ${rcvar} is set, $1 is not "rcvar", "describe",
1004                                         # "enable" or "delete", and ${rc_pid} is not set, run:
1005                                         #       checkyesno ${rcvar}
1006                                         # and return if that failed
1007                                         #
1008                 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" -a "$rc_arg" != "stop" \
1009                     -a "$rc_arg" != "delete" -a "$rc_arg" != "enable" \
1010                     -a "$rc_arg" != "describe" ] ||
1011                     [ -n "${rcvar}" -a "$rc_arg" = "stop" -a -z "${rc_pid}" ]; then
1012                         if ! checkyesno ${rcvar}; then
1013                                 if [ -n "${rc_quiet}" ]; then
1014                                         return 0
1015                                 fi
1016                                 echo -n "Cannot '${rc_arg}' $name. Set ${rcvar} to "
1017                                 echo -n "YES in /etc/rc.conf or use 'one${rc_arg}' "
1018                                 echo "instead of '${rc_arg}'."
1019                                 return 0
1020                         fi
1021                 fi
1022
1023                 if [ $rc_arg = "start" -a -z "$rc_fast" -a -n "$rc_pid" ]; then
1024                         if [ -z "$rc_quiet" ]; then
1025                                 echo 1>&2 "${name} already running? " \
1026                                     "(pid=$rc_pid)."
1027                         fi
1028                         return 1
1029                 fi
1030
1031                                         # if there's a custom ${XXX_cmd},
1032                                         # run that instead of the default
1033                                         #
1034                 eval _cmd=\$${rc_arg}_cmd \
1035                      _precmd=\$${rc_arg}_precmd \
1036                      _postcmd=\$${rc_arg}_postcmd
1037
1038                 if [ -n "$_cmd" ]; then
1039                         if [ -n "$_env" ]; then
1040                                 eval "export -- $_env"
1041                         fi
1042                         _run_rc_precmd || return 1
1043                         _run_rc_doit "$_cmd $rc_extra_args" || return 1
1044                         _run_rc_postcmd
1045                         return $_return
1046                 fi
1047
1048                 case "$rc_arg" in       # default operations...
1049
1050                 describe)
1051                         if [ -n "$desc" ]; then
1052                                 echo "$desc"
1053                         fi
1054                         ;;
1055
1056                 extracommands)
1057                         echo "$extra_commands"
1058                         ;;
1059
1060                 enable)
1061                         _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=YES") &&
1062                                 echo "$name enabled in ${_out%%:*}"
1063                         ;;
1064
1065                 disable)
1066                         _out=$(/usr/sbin/sysrc -vs "$name" "$rcvar=NO") &&
1067                                 echo "$name disabled in ${_out%%:*}"
1068                         ;;
1069
1070                 delete)
1071                         _files=
1072                         for _file in $(sysrc -lEs "$name"); do
1073                                 _out=$(sysrc -Fif $_file "$rcvar") && _files="$_files $_file"
1074                         done
1075                         /usr/sbin/sysrc -x "$rcvar" && echo "$rcvar deleted in ${_files# }"
1076                                 # delete file in rc.conf.d if desired and empty.
1077                         checkyesno service_delete_empty || _files=
1078                         for _file in $_files; do
1079                                 [ "$_file" = "${_file#*/rc.conf.d/}" ] && continue
1080                                 [ $(/usr/bin/stat -f%z $_file) -gt 0 ] && continue
1081                                 /bin/rm "$_file" && echo "Empty file $_file removed"
1082                         done
1083                         ;;
1084
1085                 status)
1086                         _run_rc_precmd || return 1
1087                         if [ -n "$rc_pid" ]; then
1088                                 echo "${name} is running as pid $rc_pid."
1089                         else
1090                                 echo "${name} is not running."
1091                                 return 1
1092                         fi
1093                         _run_rc_postcmd
1094                         ;;
1095
1096                 start)
1097                         if [ ! -x "${_chroot}${_chroot:+/}${command}" ]; then
1098                                 warn "run_rc_command: cannot run $command"
1099                                 return 1
1100                         fi
1101
1102                         if ! _run_rc_precmd; then
1103                                 warn "failed precmd routine for ${name}"
1104                                 return 1
1105                         fi
1106
1107                                         # setup the full command to run
1108                                         #
1109                         check_startmsgs && echo "Starting ${name}."
1110                         if [ -n "$_chroot" ]; then
1111                                 _cd=
1112                                 _doit="\
1113 ${_nice:+nice -n $_nice }\
1114 ${_fib:+setfib -F $_fib }\
1115 ${_env:+env $_env }\
1116 chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\
1117 $_chroot $command $rc_flags $command_args"
1118                         else
1119                                 _cd="${_chdir:+cd $_chdir && }"
1120                                 _doit="\
1121 ${_fib:+setfib -F $_fib }\
1122 ${_env:+env $_env }\
1123 $command $rc_flags $command_args"
1124                                 if [ -n "$_user" ]; then
1125                                     _doit="su -m $_user -c 'sh -c \"$_doit\"'"
1126                                 fi
1127                                 if [ -n "$_nice" ]; then
1128                                         if [ -z "$_user" ]; then
1129                                                 _doit="sh -c \"$_doit\""
1130                                         fi
1131                                         _doit="nice -n $_nice $_doit"
1132                                 fi
1133                                 if [ -n "$_prepend" ]; then
1134                                         _doit="$_prepend $_doit"
1135                                 fi
1136                         fi
1137
1138                                         # Prepend default limits
1139                         _doit="$_cd limits -C $_login_class $_limits $_doit"
1140
1141                                         # run the full command
1142                                         #
1143                         if ! _run_rc_doit "$_doit"; then
1144                                 warn "failed to start ${name}"
1145                                 return 1
1146                         fi
1147
1148                                         # finally, run postcmd
1149                                         #
1150                         _run_rc_postcmd
1151                         ;;
1152
1153                 stop)
1154                         if [ -z "$rc_pid" ]; then
1155                                 [ -n "$rc_fast" ] && return 0
1156                                 _run_rc_notrunning
1157                                 return 1
1158                         fi
1159
1160                         _run_rc_precmd || return 1
1161
1162                                         # send the signal to stop
1163                                         #
1164                         echo "Stopping ${name}."
1165                         _doit=$(_run_rc_killcmd "${sig_stop:-TERM}")
1166                         _run_rc_doit "$_doit" || return 1
1167
1168                                         # wait for the command to exit,
1169                                         # and run postcmd.
1170                         wait_for_pids $rc_pid
1171
1172                         _run_rc_postcmd
1173                         ;;
1174
1175                 reload)
1176                         if [ -z "$rc_pid" ]; then
1177                                 _run_rc_notrunning
1178                                 return 1
1179                         fi
1180
1181                         _run_rc_precmd || return 1
1182
1183                         _doit=$(_run_rc_killcmd "${sig_reload:-HUP}")
1184                         _run_rc_doit "$_doit" || return 1
1185
1186                         _run_rc_postcmd
1187                         ;;
1188
1189                 restart)
1190                                         # prevent restart being called more
1191                                         # than once by any given script
1192                                         #
1193                         if ${_rc_restart_done:-false}; then
1194                                 return 0
1195                         fi
1196                         _rc_restart_done=true
1197
1198                         _run_rc_precmd || return 1
1199
1200                         # run those in a subshell to keep global variables
1201                         ( run_rc_command ${_rc_prefix}stop $rc_extra_args )
1202                         ( run_rc_command ${_rc_prefix}start $rc_extra_args )
1203                         _return=$?
1204                         [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1
1205
1206                         _run_rc_postcmd
1207                         ;;
1208
1209                 poll)
1210                         _run_rc_precmd || return 1
1211                         if [ -n "$rc_pid" ]; then
1212                                 wait_for_pids $rc_pid
1213                         fi
1214                         _run_rc_postcmd
1215                         ;;
1216
1217                 rcvar)
1218                         echo -n "# $name"
1219                         if [ -n "$desc" ]; then
1220                                 echo " : $desc"
1221                         else
1222                                 echo ""
1223                         fi
1224                         echo "#"
1225                         # Get unique vars in $rcvar $rcvars
1226                         for _v in $rcvar $rcvars; do
1227                                 case $v in
1228                                 $_v\ *|\ *$_v|*\ $_v\ *) ;;
1229                                 *)      v="${v# } $_v" ;;
1230                                 esac
1231                         done
1232
1233                         # Display variables.
1234                         for _v in $v; do
1235                                 if [ -z "$_v" ]; then
1236                                         continue
1237                                 fi
1238
1239                                 eval _desc=\$${_v}_desc
1240                                 eval _defval=\$${_v}_defval
1241                                 _h="-"
1242
1243                                 eval echo \"$_v=\\\"\$$_v\\\"\"
1244                                 # decode multiple lines of _desc
1245                                 while [ -n "$_desc" ]; do
1246                                         case $_desc in
1247                                         *^^*)
1248                                                 echo "# $_h ${_desc%%^^*}"
1249                                                 _desc=${_desc#*^^}
1250                                                 _h=" "
1251                                                 ;;
1252                                         *)
1253                                                 echo "# $_h ${_desc}"
1254                                                 break
1255                                                 ;;
1256                                         esac
1257                                 done
1258                                 echo "#   (default: \"$_defval\")"
1259                         done
1260                         echo ""
1261                         ;;
1262
1263                 *)
1264                         rc_usage $_keywords
1265                         ;;
1266
1267                 esac
1268
1269                 # Apply protect(1) to the PID if ${name}_oomprotect is set.
1270                 case "$rc_arg" in
1271                 start)
1272                         # We cannot use protect(1) inside jails.
1273                         if [ -n "$_oomprotect" ] && [ -f "${PROTECT}" ] &&
1274                             [ "$(sysctl -n security.jail.jailed)" -eq 0 ]; then
1275                                 pid=$(check_process $command)
1276                                 case $_oomprotect in
1277                                 [Aa][Ll][Ll])
1278                                         ${PROTECT} -i -p ${pid}
1279                                         ;;
1280                                 [Yy][Ee][Ss])
1281                                         ${PROTECT} -p ${pid}
1282                                         ;;
1283                                 esac
1284                         fi
1285                 ;;
1286                 esac
1287
1288                 return $_return
1289         done
1290
1291         echo 1>&2 "$0: unknown directive '$rc_arg'."
1292         rc_usage $_keywords
1293         # not reached
1294 }
1295
1296 #
1297 # Helper functions for run_rc_command: common code.
1298 # They use such global variables besides the exported rc_* ones:
1299 #
1300 #       name           R/W
1301 #       ------------------
1302 #       _precmd         R
1303 #       _postcmd        R
1304 #       _return         W
1305 #
1306 _run_rc_precmd()
1307 {
1308         check_required_before "$rc_arg" || return 1
1309
1310         if [ -n "$_precmd" ]; then
1311                 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args"
1312                 eval "$_precmd $rc_extra_args"
1313                 _return=$?
1314
1315                 # If precmd failed and force isn't set, request exit.
1316                 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then
1317                         return 1
1318                 fi
1319         fi
1320
1321         check_required_after "$rc_arg" || return 1
1322
1323         return 0
1324 }
1325
1326 _run_rc_postcmd()
1327 {
1328         if [ -n "$_postcmd" ]; then
1329                 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args"
1330                 eval "$_postcmd $rc_extra_args"
1331                 _return=$?
1332         fi
1333         return 0
1334 }
1335
1336 _run_rc_doit()
1337 {
1338         debug "run_rc_command: doit: $*"
1339         eval "$@"
1340         _return=$?
1341
1342         # If command failed and force isn't set, request exit.
1343         if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then
1344                 return 1
1345         fi
1346
1347         return 0
1348 }
1349
1350 _run_rc_notrunning()
1351 {
1352         local _pidmsg
1353
1354         if [ -n "$pidfile" ]; then
1355                 _pidmsg=" (check $pidfile)."
1356         else
1357                 _pidmsg=
1358         fi
1359         echo 1>&2 "${name} not running?${_pidmsg}"
1360 }
1361
1362 _run_rc_killcmd()
1363 {
1364         local _cmd
1365
1366         _cmd="kill -$1 $rc_pid"
1367         if [ -n "$_user" ]; then
1368                 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'"
1369         fi
1370         echo "$_cmd"
1371 }
1372
1373 #
1374 # run_rc_script file arg
1375 #       Start the script `file' with `arg', and correctly handle the
1376 #       return value from the script.
1377 #       If `file' ends with `.sh' and lives in /etc/rc.d, ignore it as it's
1378 #       an old-style startup file.
1379 #       If `file' ends with `.sh' and does not live in /etc/rc.d, it's sourced
1380 #       into the current environment if $rc_fast_and_loose is set; otherwise
1381 #       it is run as a child process.
1382 #       If `file' appears to be a backup or scratch file, ignore it.
1383 #       Otherwise if it is executable run as a child process.
1384 #
1385 run_rc_script()
1386 {
1387         _file=$1
1388         _arg=$2
1389         if [ -z "$_file" -o -z "$_arg" ]; then
1390                 err 3 'USAGE: run_rc_script file arg'
1391         fi
1392
1393         unset   name command command_args command_interpreter \
1394                 extra_commands pidfile procname \
1395                 rcvar rcvars rcvars_obsolete required_dirs required_files \
1396                 required_vars
1397         eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd
1398
1399         rc_service="$_file"
1400         case "$_file" in
1401         /etc/rc.d/*.sh)                 # no longer allowed in the base
1402                 warn "Ignoring old-style startup script $_file"
1403                 ;;
1404         *[~#]|*.OLD|*.bak|*.orig|*,v)   # scratch file; skip
1405                 warn "Ignoring scratch file $_file"
1406                 ;;
1407         *)                              # run in subshell
1408                 if [ -x $_file ]; then
1409                         if [ -n "$rc_fast_and_loose" ]; then
1410                                 set $_arg; . $_file
1411                         else
1412                                 ( trap "echo Script $_file interrupted >&2 ; kill -QUIT $$" 3
1413                                   trap "echo Script $_file interrupted >&2 ; exit 1" 2
1414                                   trap "echo Script $_file running >&2" 29
1415                                   set $_arg; . $_file )
1416                         fi
1417                 fi
1418                 ;;
1419         esac
1420 }
1421
1422 #
1423 # load_rc_config [service]
1424 #       Source in the configuration file(s) for a given service.
1425 #       If no service is specified, only the global configuration
1426 #       file(s) will be loaded.
1427 #
1428 load_rc_config()
1429 {
1430         local _name _rcvar_val _var _defval _v _msg _new _d
1431         _name=$1
1432
1433         if ${_rc_conf_loaded:-false}; then
1434                 :
1435         else
1436                 if [ -r /etc/defaults/rc.conf ]; then
1437                         debug "Sourcing /etc/defaults/rc.conf"
1438                         . /etc/defaults/rc.conf
1439                         source_rc_confs
1440                 elif [ -r /etc/rc.conf ]; then
1441                         debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)."
1442                         . /etc/rc.conf
1443                 fi
1444                 _rc_conf_loaded=true
1445         fi
1446
1447         # If a service name was specified, attempt to load
1448         # service-specific configuration
1449         if [ -n "$_name" ] ; then
1450                 for _d in /etc ${local_startup}; do
1451                         _d=${_d%/rc.d}
1452                         if [ -f ${_d}/rc.conf.d/"$_name" ]; then
1453                                 debug "Sourcing ${_d}/rc.conf.d/$_name"
1454                                 . ${_d}/rc.conf.d/"$_name"
1455                         elif [ -d ${_d}/rc.conf.d/"$_name" ] ; then
1456                                 local _rc
1457                                 for _rc in ${_d}/rc.conf.d/"$_name"/* ; do
1458                                         if [ -f "$_rc" ] ; then
1459                                                 debug "Sourcing $_rc"
1460                                                 . "$_rc"
1461                                         fi
1462                                 done
1463                         fi
1464                 done
1465         fi
1466
1467         # Set defaults if defined.
1468         for _var in $rcvar $rcvars; do
1469                 eval _defval=\$${_var}_defval
1470                 if [ -n "$_defval" ]; then
1471                         eval : \${$_var:=\$${_var}_defval}
1472                 fi
1473         done
1474
1475         # check obsolete rc.conf variables
1476         for _var in $rcvars_obsolete; do
1477                 eval _v=\$$_var
1478                 eval _msg=\$${_var}_obsolete_msg
1479                 eval _new=\$${_var}_newvar
1480                 case $_v in
1481                 "")
1482                         ;;
1483                 *)
1484                         if [ -z "$_new" ]; then
1485                                 _msg="Ignored."
1486                         else
1487                                 eval $_new=\"\$$_var\"
1488                                 if [ -z "$_msg" ]; then
1489                                         _msg="Use \$$_new instead."
1490                                 fi
1491                         fi
1492                         warn "\$$_var is obsolete.  $_msg"
1493                         ;;
1494                 esac
1495         done
1496 }
1497
1498 #
1499 # load_rc_config_var name var
1500 #       Read the rc.conf(5) var for name and set in the
1501 #       current shell, using load_rc_config in a subshell to prevent
1502 #       unwanted side effects from other variable assignments.
1503 #
1504 load_rc_config_var()
1505 {
1506         if [ $# -ne 2 ]; then
1507                 err 3 'USAGE: load_rc_config_var name var'
1508         fi
1509         eval $(eval '(
1510                 load_rc_config '$1' >/dev/null;
1511                 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then
1512                         echo '$2'=\'\''${'$2'}\'\'';
1513                 fi
1514         )' )
1515 }
1516
1517 #
1518 # rc_usage commands
1519 #       Print a usage string for $0, with `commands' being a list of
1520 #       valid commands.
1521 #
1522 rc_usage()
1523 {
1524         echo -n 1>&2 "Usage: $0 [fast|force|one|quiet]("
1525
1526         _sep=
1527         for _elem; do
1528                 echo -n 1>&2 "$_sep$_elem"
1529                 _sep="|"
1530         done
1531         echo 1>&2 ")"
1532         exit 1
1533 }
1534
1535 #
1536 # err exitval message
1537 #       Display message to stderr and log to the syslog, and exit with exitval.
1538 #
1539 err()
1540 {
1541         exitval=$1
1542         shift
1543
1544         if [ -x /usr/bin/logger ]; then
1545                 logger "$0: ERROR: $*"
1546         fi
1547         echo 1>&2 "$0: ERROR: $*"
1548         exit $exitval
1549 }
1550
1551 #
1552 # warn message
1553 #       Display message to stderr and log to the syslog.
1554 #
1555 warn()
1556 {
1557         if [ -x /usr/bin/logger ]; then
1558                 logger "$0: WARNING: $*"
1559         fi
1560         echo 1>&2 "$0: WARNING: $*"
1561 }
1562
1563 #
1564 # info message
1565 #       Display informational message to stdout and log to syslog.
1566 #
1567 info()
1568 {
1569         case ${rc_info} in
1570         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1571                 if [ -x /usr/bin/logger ]; then
1572                         logger "$0: INFO: $*"
1573                 fi
1574                 echo "$0: INFO: $*"
1575                 ;;
1576         esac
1577 }
1578
1579 #
1580 # debug message
1581 #       If debugging is enabled in rc.conf output message to stderr.
1582 #       BEWARE that you don't call any subroutine that itself calls this
1583 #       function.
1584 #
1585 debug()
1586 {
1587         case ${rc_debug} in
1588         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1589                 if [ -x /usr/bin/logger ]; then
1590                         logger "$0: DEBUG: $*"
1591                 fi
1592                 echo 1>&2 "$0: DEBUG: $*"
1593                 ;;
1594         esac
1595 }
1596
1597 #
1598 # backup_file action file cur backup
1599 #       Make a backup copy of `file' into `cur', and save the previous
1600 #       version of `cur' as `backup'.
1601 #
1602 #       The `action' keyword can be one of the following:
1603 #
1604 #       add             `file' is now being backed up (and is possibly
1605 #                       being reentered into the backups system).  `cur'
1606 #                       is created.
1607 #
1608 #       update          `file' has changed and needs to be backed up.
1609 #                       If `cur' exists, it is copied to `back'
1610 #                       and then `file' is copied to `cur'.
1611 #
1612 #       remove          `file' is no longer being tracked by the backups
1613 #                       system.  `cur' is moved `back'.
1614 #
1615 #
1616 backup_file()
1617 {
1618         _action=$1
1619         _file=$2
1620         _cur=$3
1621         _back=$4
1622
1623         case $_action in
1624         add|update)
1625                 if [ -f $_cur ]; then
1626                         cp -p $_cur $_back
1627                 fi
1628                 cp -p $_file $_cur
1629                 chown root:wheel $_cur
1630                 ;;
1631         remove)
1632                 mv -f $_cur $_back
1633                 ;;
1634         esac
1635 }
1636
1637 # make_symlink src link
1638 #       Make a symbolic link 'link' to src from basedir. If the
1639 #       directory in which link is to be created does not exist
1640 #       a warning will be displayed and an error will be returned.
1641 #       Returns 0 on success, 1 otherwise.
1642 #
1643 make_symlink()
1644 {
1645         local src link linkdir _me
1646         src="$1"
1647         link="$2"
1648         linkdir="`dirname $link`"
1649         _me="make_symlink()"
1650
1651         if [ -z "$src" -o -z "$link" ]; then
1652                 warn "$_me: requires two arguments."
1653                 return 1
1654         fi
1655         if [ ! -d "$linkdir" ]; then
1656                 warn "$_me: the directory $linkdir does not exist."
1657                 return 1
1658         fi
1659         if ! ln -sf $src $link; then
1660                 warn "$_me: unable to make a symbolic link from $link to $src"
1661                 return 1
1662         fi
1663         return 0
1664 }
1665
1666 # devfs_rulesets_from_file file
1667 #       Reads a set of devfs commands from file, and creates
1668 #       the specified rulesets with their rules. Returns non-zero
1669 #       if there was an error.
1670 #
1671 devfs_rulesets_from_file()
1672 {
1673         local file _err _me _opts
1674         file="$1"
1675         _me="devfs_rulesets_from_file"
1676         _err=0
1677
1678         if [ -z "$file" ]; then
1679                 warn "$_me: you must specify a file"
1680                 return 1
1681         fi
1682         if [ ! -e "$file" ]; then
1683                 debug "$_me: no such file ($file)"
1684                 return 0
1685         fi
1686
1687         # Disable globbing so that the rule patterns are not expanded
1688         # by accident with matching filesystem entries.
1689         _opts=$-; set -f
1690
1691         debug "reading rulesets from file ($file)"
1692         { while read line
1693         do
1694                 case $line in
1695                 \#*)
1696                         continue
1697                         ;;
1698                 \[*\]*)
1699                         rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"`
1700                         if [ -z "$rulenum" ]; then
1701                                 warn "$_me: cannot extract rule number ($line)"
1702                                 _err=1
1703                                 break
1704                         fi
1705                         rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"`
1706                         if [ -z "$rulename" ]; then
1707                                 warn "$_me: cannot extract rule name ($line)"
1708                                 _err=1
1709                                 break;
1710                         fi
1711                         eval $rulename=\$rulenum
1712                         debug "found ruleset: $rulename=$rulenum"
1713                         if ! /sbin/devfs rule -s $rulenum delset; then
1714                                 _err=1
1715                                 break
1716                         fi
1717                         ;;
1718                 *)
1719                         rulecmd="${line%%"\#*"}"
1720                         # evaluate the command incase it includes
1721                         # other rules
1722                         if [ -n "$rulecmd" ]; then
1723                                 debug "adding rule ($rulecmd)"
1724                                 if ! eval /sbin/devfs rule -s $rulenum $rulecmd
1725                                 then
1726                                         _err=1
1727                                         break
1728                                 fi
1729                         fi
1730                         ;;
1731                 esac
1732                 if [ $_err -ne 0 ]; then
1733                         debug "error in $_me"
1734                         break
1735                 fi
1736         done } < $file
1737         case $_opts in *f*) ;; *) set +f ;; esac
1738         return $_err
1739 }
1740
1741 # devfs_init_rulesets
1742 #       Initializes rulesets from configuration files. Returns
1743 #       non-zero if there was an error.
1744 #
1745 devfs_init_rulesets()
1746 {
1747         local file _me
1748         _me="devfs_init_rulesets"
1749
1750         # Go through this only once
1751         if [ -n "$devfs_rulesets_init" ]; then
1752                 debug "$_me: devfs rulesets already initialized"
1753                 return
1754         fi
1755         for file in $devfs_rulesets; do
1756                 if ! devfs_rulesets_from_file $file; then
1757                         warn "$_me: could not read rules from $file"
1758                         return 1
1759                 fi
1760         done
1761         devfs_rulesets_init=1
1762         debug "$_me: devfs rulesets initialized"
1763         return 0
1764 }
1765
1766 # devfs_set_ruleset ruleset [dir]
1767 #       Sets the default ruleset of dir to ruleset. The ruleset argument
1768 #       must be a ruleset name as specified in devfs.rules(5) file.
1769 #       Returns non-zero if it could not set it successfully.
1770 #
1771 devfs_set_ruleset()
1772 {
1773         local devdir rs _me
1774         [ -n "$1" ] && eval rs=\$$1 || rs=
1775         [ -n "$2" ] && devdir="-m "$2"" || devdir=
1776         _me="devfs_set_ruleset"
1777
1778         if [ -z "$rs" ]; then
1779                 warn "$_me: you must specify a ruleset number"
1780                 return 1
1781         fi
1782         debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })"
1783         if ! /sbin/devfs $devdir ruleset $rs; then
1784                 warn "$_me: unable to set ruleset $rs to ${devdir#-m }"
1785                 return 1
1786         fi
1787         return 0
1788 }
1789
1790 # devfs_apply_ruleset ruleset [dir]
1791 #       Apply ruleset number $ruleset to the devfs mountpoint $dir.
1792 #       The ruleset argument must be a ruleset name as specified
1793 #       in a devfs.rules(5) file.  Returns 0 on success or non-zero
1794 #       if it could not apply the ruleset.
1795 #
1796 devfs_apply_ruleset()
1797 {
1798         local devdir rs _me
1799         [ -n "$1" ] && eval rs=\$$1 || rs=
1800         [ -n "$2" ] && devdir="-m "$2"" || devdir=
1801         _me="devfs_apply_ruleset"
1802
1803         if [ -z "$rs" ]; then
1804                 warn "$_me: you must specify a ruleset"
1805                 return 1
1806         fi
1807         debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })"
1808         if ! /sbin/devfs $devdir rule -s $rs applyset; then
1809                 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }"
1810                 return 1
1811         fi
1812         return 0
1813 }
1814
1815 # devfs_domount dir [ruleset]
1816 #       Mount devfs on dir. If ruleset is specified it is set
1817 #       on the mount-point. It must also be a ruleset name as specified
1818 #       in a devfs.rules(5) file. Returns 0 on success.
1819 #
1820 devfs_domount()
1821 {
1822         local devdir rs _me
1823         devdir="$1"
1824         [ -n "$2" ] && rs=$2 || rs=
1825         _me="devfs_domount()"
1826
1827         if [ -z "$devdir" ]; then
1828                 warn "$_me: you must specify a mount-point"
1829                 return 1
1830         fi
1831         debug "$_me: mount-point is ($devdir), ruleset is ($rs)"
1832         if ! mount -t devfs dev "$devdir"; then
1833                 warn "$_me: Unable to mount devfs on $devdir"
1834                 return 1
1835         fi
1836         if [ -n "$rs" ]; then
1837                 devfs_init_rulesets
1838                 devfs_set_ruleset $rs $devdir
1839                 devfs -m $devdir rule applyset
1840         fi
1841         return 0
1842 }
1843
1844 # Provide a function for normalizing the mounting of memory
1845 # filesystems.  This should allow the rest of the code here to remain
1846 # as close as possible between 5-current and 4-stable.
1847 #   $1 = size
1848 #   $2 = mount point
1849 #   $3 = (optional) extra mdmfs flags
1850 mount_md()
1851 {
1852         if [ -n "$3" ]; then
1853                 flags="$3"
1854         fi
1855         /sbin/mdmfs $flags -s $1 ${mfs_type} $2
1856 }
1857
1858 # Code common to scripts that need to load a kernel module
1859 # if it isn't in the kernel yet. Syntax:
1860 #   load_kld [-e regex] [-m module] file
1861 # where -e or -m chooses the way to check if the module
1862 # is already loaded:
1863 #   regex is egrep'd in the output from `kldstat -v',
1864 #   module is passed to `kldstat -m'.
1865 # The default way is as though `-m file' were specified.
1866 load_kld()
1867 {
1868         local _loaded _mod _opt _re
1869
1870         while getopts "e:m:" _opt; do
1871                 case "$_opt" in
1872                 e) _re="$OPTARG" ;;
1873                 m) _mod="$OPTARG" ;;
1874                 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;;
1875                 esac
1876         done
1877         shift $(($OPTIND - 1))
1878         if [ $# -ne 1 ]; then
1879                 err 3 'USAGE: load_kld [-e regex] [-m module] file'
1880         fi
1881         _mod=${_mod:-$1}
1882         _loaded=false
1883         if [ -n "$_re" ]; then
1884                 if kldstat -v | egrep -q -e "$_re"; then
1885                         _loaded=true
1886                 fi
1887         else
1888                 if kldstat -q -m "$_mod"; then
1889                         _loaded=true
1890                 fi
1891         fi
1892         if ! $_loaded; then
1893                 if ! kldload "$1"; then
1894                         warn "Unable to load kernel module $1"
1895                         return 1
1896                 else
1897                         info "$1 kernel module loaded."
1898                 fi
1899         else
1900                 debug "load_kld: $1 kernel module already loaded."
1901         fi
1902         return 0
1903 }
1904
1905 # ltr str src dst [var]
1906 #       Change every $src in $str to $dst.
1907 #       Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor
1908 #       awk(1). If var is non-NULL, set it to the result.
1909 ltr()
1910 {
1911         local _str _src _dst _out _com _var
1912         _str="$1"
1913         _src="$2"
1914         _dst="$3"
1915         _var="$4"
1916         _out=""
1917
1918         local IFS="${_src}"
1919         for _com in ${_str}; do
1920                 if [ -z "${_out}" ]; then
1921                         _out="${_com}"
1922                 else
1923                         _out="${_out}${_dst}${_com}"
1924                 fi
1925         done
1926         if [ -n "${_var}" ]; then
1927                 setvar "${_var}" "${_out}"
1928         else
1929                 echo "${_out}"
1930         fi
1931 }
1932
1933 # Creates a list of providers for GELI encryption.
1934 geli_make_list()
1935 {
1936         local devices devices2
1937         local provider mountpoint type options rest
1938
1939         # Create list of GELI providers from fstab.
1940         while read provider mountpoint type options rest ; do
1941                 case ":${options}" in
1942                 :*noauto*)
1943                         noauto=yes
1944                         ;;
1945                 *)
1946                         noauto=no
1947                         ;;
1948                 esac
1949
1950                 case ":${provider}" in
1951                 :#*)
1952                         continue
1953                         ;;
1954                 *.eli)
1955                         # Skip swap devices.
1956                         if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then
1957                                 continue
1958                         fi
1959                         devices="${devices} ${provider}"
1960                         ;;
1961                 esac
1962         done < /etc/fstab
1963
1964         # Append providers from geli_devices.
1965         devices="${devices} ${geli_devices}"
1966
1967         for provider in ${devices}; do
1968                 provider=${provider%.eli}
1969                 provider=${provider#/dev/}
1970                 devices2="${devices2} ${provider}"
1971         done
1972
1973         echo ${devices2}
1974 }
1975
1976 # Originally, root mount hold had to be released before mounting
1977 # the root filesystem.  This delayed the boot, so it was changed
1978 # to only wait if the root device isn't readily available.  This
1979 # can result in rc scripts executing before all the devices - such
1980 # as graid(8), or USB disks - can be accessed.  This function can
1981 # be used to explicitly wait for root mount holds to be released.
1982 root_hold_wait()
1983 {
1984         local wait waited holders
1985
1986         waited=0
1987         while true; do
1988                 holders="$(sysctl -n vfs.root_mount_hold)"
1989                 if [ -z "${holders}" ]; then
1990                         break;
1991                 fi
1992                 if [ ${waited} -eq 0 ]; then
1993                         echo -n "Waiting ${root_hold_delay}s" \
1994                         "for the root mount holders: ${holders}"
1995                 else
1996                         echo -n .
1997                 fi
1998                 if [ ${waited} -ge ${root_hold_delay} ]; then
1999                         echo
2000                         break
2001                 fi
2002                 sleep 1
2003                 waited=$(($waited + 1))
2004         done
2005 }
2006
2007 # Find scripts in local_startup directories that use the old syntax
2008 #
2009 find_local_scripts_old() {
2010         zlist=''
2011         slist=''
2012         for dir in ${local_startup}; do
2013                 if [ -d "${dir}" ]; then
2014                         for file in ${dir}/[0-9]*.sh; do
2015                                 grep '^# PROVIDE:' $file >/dev/null 2>&1 &&
2016                                     continue
2017                                 zlist="$zlist $file"
2018                         done
2019                         for file in ${dir}/[!0-9]*.sh; do
2020                                 grep '^# PROVIDE:' $file >/dev/null 2>&1 &&
2021                                     continue
2022                                 slist="$slist $file"
2023                         done
2024                 fi
2025         done
2026 }
2027
2028 find_local_scripts_new() {
2029         local_rc=''
2030         for dir in ${local_startup}; do
2031                 if [ -d "${dir}" ]; then
2032                         for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do
2033                                 case "$file" in
2034                                 *.sample) ;;
2035                                 *)      if [ -x "$file" ]; then
2036                                                 local_rc="${local_rc} ${file}"
2037                                         fi
2038                                         ;;
2039                                 esac
2040                         done
2041                 fi
2042         done
2043 }
2044
2045 # check_required_{before|after} command
2046 #       Check for things required by the command before and after its precmd,
2047 #       respectively.  The two separate functions are needed because some
2048 #       conditions should prevent precmd from being run while other things
2049 #       depend on precmd having already been run.
2050 #
2051 check_required_before()
2052 {
2053         local _f
2054
2055         case "$1" in
2056         start)
2057                 for _f in $required_vars; do
2058                         if ! checkyesno $_f; then
2059                                 warn "\$${_f} is not enabled."
2060                                 if [ -z "$rc_force" ]; then
2061                                         return 1
2062                                 fi
2063                         fi
2064                 done
2065
2066                 for _f in $required_dirs; do
2067                         if [ ! -d "${_f}/." ]; then
2068                                 warn "${_f} is not a directory."
2069                                 if [ -z "$rc_force" ]; then
2070                                         return 1
2071                                 fi
2072                         fi
2073                 done
2074
2075                 for _f in $required_files; do
2076                         if [ ! -r "${_f}" ]; then
2077                                 warn "${_f} is not readable."
2078                                 if [ -z "$rc_force" ]; then
2079                                         return 1
2080                                 fi
2081                         fi
2082                 done
2083                 ;;
2084         esac
2085
2086         return 0
2087 }
2088
2089 check_required_after()
2090 {
2091         local _f _args
2092
2093         case "$1" in
2094         start)
2095                 for _f in $required_modules; do
2096                         case "${_f}" in
2097                                 *~*)    _args="-e ${_f#*~} ${_f%%~*}" ;;
2098                                 *:*)    _args="-m ${_f#*:} ${_f%%:*}" ;;
2099                                 *)      _args="${_f}" ;;
2100                         esac
2101                         if ! load_kld ${_args}; then
2102                                 if [ -z "$rc_force" ]; then
2103                                         return 1
2104                                 fi
2105                         fi
2106                 done
2107                 ;;
2108         esac
2109
2110         return 0
2111 }
2112
2113 # check_jail mib
2114 #       Return true if security.jail.$mib exists and set to 1.
2115
2116 check_jail()
2117 {
2118         local _mib _v
2119
2120         _mib=$1
2121         if _v=$(${SYSCTL_N} "security.jail.$_mib" 2> /dev/null); then
2122                 case $_v in
2123                 1)      return 0;;
2124                 esac
2125         fi
2126         return 1
2127 }
2128
2129 # check_kern_features mib
2130 #       Return existence of kern.features.* sysctl MIB as true or
2131 #       false.  The result will be cached in $_rc_cache_kern_features_
2132 #       namespace.  "0" means the kern.features.X exists.
2133
2134 check_kern_features()
2135 {
2136         local _v
2137
2138         [ -n "$1" ] || return 1;
2139         eval _v=\$_rc_cache_kern_features_$1
2140         [ -n "$_v" ] && return "$_v";
2141
2142         if ${SYSCTL_N} kern.features.$1 > /dev/null 2>&1; then
2143                 eval _rc_cache_kern_features_$1=0
2144                 return 0
2145         else
2146                 eval _rc_cache_kern_features_$1=1
2147                 return 1
2148         fi
2149 }
2150
2151 # check_namevarlist var
2152 #       Return "0" if ${name}_var is reserved in rc.subr.
2153
2154 _rc_namevarlist="program chroot chdir env flags fib nice user group groups prepend"
2155 check_namevarlist()
2156 {
2157         local _v
2158
2159         for _v in $_rc_namevarlist; do
2160         case $1 in
2161         $_v)    return 0 ;;
2162         esac
2163         done
2164
2165         return 1
2166 }
2167
2168 # _echoonce var msg mode
2169 #       mode=0: Echo $msg if ${$var} is empty.
2170 #               After doing echo, a string is set to ${$var}.
2171 #
2172 #       mode=1: Echo $msg if ${$var} is a string with non-zero length.
2173 #
2174 _echoonce()
2175 {
2176         local _var _msg _mode
2177         eval _var=\$$1
2178         _msg=$2
2179         _mode=$3
2180
2181         case $_mode in
2182         1)      [ -n "$_var" ] && echo "$_msg" ;;
2183         *)      [ -z "$_var" ] && echo -n "$_msg" && eval "$1=finished" ;;
2184         esac
2185 }
2186
2187 # If the loader env variable rc.debug is set, turn on debugging. rc.conf will
2188 # still override this, but /etc/defaults/rc.conf can't unconditionally set this
2189 # since it would undo what we've done here.
2190 if kenv -q rc.debug > /dev/null ; then
2191         rc_debug=YES
2192 fi