regress/Makefile

   1 #       $OpenBSD: Makefile,v 1.78 2015/01/26 06:12:18 djm Exp $
   2
   3 REGRESS_TARGETS=        unit t1 t2 t3 t4 t5 t6 t7 t8 t9 t10 t11 t12 t-exec
   4 tests:          prep $(REGRESS_TARGETS)
   5
   6 # Interop tests are not run by default
   7 interop interop-tests: t-exec-interop
   8
   9 prep:
  10         test "x${USE_VALGRIND}" = "x" || mkdir -p $(OBJ)/valgrind-out
  11
  12 clean:
  13         for F in $(CLEANFILES); do rm -f $(OBJ)$$F; done
  14         test -z "${SUDO}" || ${SUDO} rm -f ${SUDO_CLEAN}
  15         rm -rf $(OBJ).putty
  16
  17 distclean:      clean
  18
  19 LTESTS=         connect \
  20                 proxy-connect \
  21                 connect-privsep \
  22                 proto-version \
  23                 proto-mismatch \
  24                 exit-status \
  25                 envpass \
  26                 transfer \
  27                 banner \
  28                 rekey \
  29                 stderr-data \
  30                 stderr-after-eof \
  31                 broken-pipe \
  32                 try-ciphers \
  33                 yes-head \
  34                 login-timeout \
  35                 agent \
  36                 agent-getpeereid \
  37                 agent-timeout \
  38                 agent-ptrace \
  39                 keyscan \
  40                 keygen-change \
  41                 keygen-convert \
  42                 key-options \
  43                 scp \
  44                 sftp \
  45                 sftp-chroot \
  46                 sftp-cmds \
  47                 sftp-badcmds \
  48                 sftp-batch \
  49                 sftp-glob \
  50                 sftp-perm \
  51                 reconfigure \
  52                 dynamic-forward \
  53                 forwarding \
  54                 multiplex \
  55                 reexec \
  56                 brokenkeys \
  57                 cfgmatch \
  58                 addrmatch \
  59                 localcommand \
  60                 forcecommand \
  61                 portnum \
  62                 keytype \
  63                 kextype \
  64                 cert-hostkey \
  65                 cert-userkey \
  66                 host-expand \
  67                 keys-command \
  68                 forward-control \
  69                 integrity \
  70                 krl \
  71                 multipubkey \
  72                 limit-keytype \
  73                 hostkey-agent \
  74                 keygen-knownhosts \
  75                 hostkey-rotate
  76
  77
  78 #               dhgex \
  79
  80 INTEROP_TESTS=  putty-transfer putty-ciphers putty-kex conch-ciphers
  81 #INTEROP_TESTS+=ssh-com ssh-com-client ssh-com-keygen ssh-com-sftp
  82
  83 #LTESTS=        cipher-speed
  84
  85 USER!=          id -un
  86 CLEANFILES=     t2.out t3.out t6.out1 t6.out2 t7.out t7.out.pub copy.1 copy.2 \
  87                 t8.out t8.out.pub t9.out t9.out.pub t10.out t10.out.pub \
  88                 t12.out t12.out.pub \
  89                 authorized_keys_${USER} known_hosts pidfile testdata \
  90                 ssh_config sshd_config.orig ssh_proxy sshd_config sshd_proxy \
  91                 rsa.pub rsa rsa1.pub rsa1 host.rsa host.rsa1 \
  92                 rsa-agent rsa-agent.pub rsa1-agent rsa1-agent.pub \
  93                 ls.copy banner.in banner.out empty.in \
  94                 scp-ssh-wrapper.scp ssh_proxy_envpass remote_pid \
  95                 sshd_proxy_bak rsa_ssh2_cr.prv rsa_ssh2_crnl.prv \
  96                 known_hosts-cert host_ca_key* cert_host_key* cert_user_key* \
  97                 putty.rsa2 sshd_proxy_orig ssh_proxy_bak \
  98                 key.rsa-* key.dsa-* key.ecdsa-* \
  99                 authorized_principals_${USER} expect actual ready \
 100                 sshd_proxy.* authorized_keys_${USER}.* modpipe revoked-* krl-* \
 101                 ssh.log failed-ssh.log sshd.log failed-sshd.log \
 102                 regress.log failed-regress.log ssh-log-wrapper.sh \
 103                 sftp-server.sh sftp-server.log sftp.log setuid-allowed \
 104                 data ed25519-agent ed25519-agent.pub key.ed25519-512 \
 105                 key.ed25519-512.pub netcat host_krl_* host_revoked_* \
 106                 kh.* user_*key* agent-key.* known_hosts.* hkr.*
 107
 108 SUDO_CLEAN+=    /var/run/testdata_${USER} /var/run/keycommand_${USER}
 109
 110 # Enable all malloc(3) randomisations and checks
 111 TEST_ENV=      "MALLOC_OPTIONS=AFGJPRX"
 112
 113 TEST_SSH_SSHKEYGEN?=ssh-keygen
 114
 115 CPPFLAGS=-I..
 116
 117 t1:
 118         ${TEST_SSH_SSHKEYGEN} -if ${.CURDIR}/rsa_ssh2.prv | diff - ${.CURDIR}/rsa_openssh.prv
 119         tr '\n' '\r' <${.CURDIR}/rsa_ssh2.prv > ${.OBJDIR}/rsa_ssh2_cr.prv
 120         ${TEST_SSH_SSHKEYGEN} -if ${.OBJDIR}/rsa_ssh2_cr.prv | diff - ${.CURDIR}/rsa_openssh.prv
 121         awk '{print $$0 "\r"}' ${.CURDIR}/rsa_ssh2.prv > ${.OBJDIR}/rsa_ssh2_crnl.prv
 122         ${TEST_SSH_SSHKEYGEN} -if ${.OBJDIR}/rsa_ssh2_crnl.prv | diff - ${.CURDIR}/rsa_openssh.prv
 123
 124 t2:
 125         cat ${.CURDIR}/rsa_openssh.prv > $(OBJ)/t2.out
 126         chmod 600 $(OBJ)/t2.out
 127         ${TEST_SSH_SSHKEYGEN} -yf $(OBJ)/t2.out | diff - ${.CURDIR}/rsa_openssh.pub
 128
 129 t3:
 130         ${TEST_SSH_SSHKEYGEN} -ef ${.CURDIR}/rsa_openssh.pub >$(OBJ)/t3.out
 131         ${TEST_SSH_SSHKEYGEN} -if $(OBJ)/t3.out | diff - ${.CURDIR}/rsa_openssh.pub
 132
 133 t4:
 134         ${TEST_SSH_SSHKEYGEN} -E md5 -lf ${.CURDIR}/rsa_openssh.pub |\
 135                 awk '{print $$2}' | diff - ${.CURDIR}/t4.ok
 136
 137 t5:
 138         ${TEST_SSH_SSHKEYGEN} -Bf ${.CURDIR}/rsa_openssh.pub |\
 139                 awk '{print $$2}' | diff - ${.CURDIR}/t5.ok
 140
 141 t6:
 142         ${TEST_SSH_SSHKEYGEN} -if ${.CURDIR}/dsa_ssh2.prv > $(OBJ)/t6.out1
 143         ${TEST_SSH_SSHKEYGEN} -if ${.CURDIR}/dsa_ssh2.pub > $(OBJ)/t6.out2
 144         chmod 600 $(OBJ)/t6.out1
 145         ${TEST_SSH_SSHKEYGEN} -yf $(OBJ)/t6.out1 | diff - $(OBJ)/t6.out2
 146
 147 $(OBJ)/t7.out:
 148         ${TEST_SSH_SSHKEYGEN} -q -t rsa -N '' -f $@
 149
 150 t7: $(OBJ)/t7.out
 151         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t7.out > /dev/null
 152         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t7.out > /dev/null
 153
 154 $(OBJ)/t8.out:
 155         ${TEST_SSH_SSHKEYGEN} -q -t dsa -N '' -f $@
 156
 157 t8: $(OBJ)/t8.out
 158         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t8.out > /dev/null
 159         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t8.out > /dev/null
 160
 161 $(OBJ)/t9.out:
 162         test "${TEST_SSH_ECC}" != yes || \
 163         ${TEST_SSH_SSHKEYGEN} -q -t ecdsa -N '' -f $@
 164
 165 t9: $(OBJ)/t9.out
 166         test "${TEST_SSH_ECC}" != yes || \
 167         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t9.out > /dev/null
 168         test "${TEST_SSH_ECC}" != yes || \
 169         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t9.out > /dev/null
 170
 171
 172 $(OBJ)/t10.out:
 173         ${TEST_SSH_SSHKEYGEN} -q -t ed25519 -N '' -f $@
 174
 175 t10: $(OBJ)/t10.out
 176         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t10.out > /dev/null
 177         ${TEST_SSH_SSHKEYGEN} -Bf $(OBJ)/t10.out > /dev/null
 178
 179 t11:
 180         ${TEST_SSH_SSHKEYGEN} -E sha256 -lf ${.CURDIR}/rsa_openssh.pub |\
 181                 awk '{print $$2}' | diff - ${.CURDIR}/t11.ok
 182
 183 t12.out:
 184         ${TEST_SSH_SSHKEYGEN} -q -t ed25519 -N '' -C 'test-comment-1234' -f $(OBJ)/$@
 185
 186 t12: t12.out
 187         ${TEST_SSH_SSHKEYGEN} -lf $(OBJ)/t12.out.pub | grep test-comment-1234 >/dev/null
 188
 189 t-exec: ${LTESTS:=.sh}
 190         @if [ "x$?" = "x" ]; then exit 0; fi; \
 191         for TEST in ""$?; do \
 192                 echo "run test $${TEST}" ... 1>&2; \
 193                 (env SUDO="${SUDO}" TEST_ENV=${TEST_ENV} ${TEST_SHELL} ${.CURDIR}/test-exec.sh ${.OBJDIR} ${.CURDIR}/$${TEST}) || exit $$?; \
 194         done
 195
 196 t-exec-interop: ${INTEROP_TESTS:=.sh}
 197         @if [ "x$?" = "x" ]; then exit 0; fi; \
 198         for TEST in ""$?; do \
 199                 echo "run test $${TEST}" ... 1>&2; \
 200                 (env SUDO="${SUDO}" TEST_ENV=${TEST_ENV} ${TEST_SHELL} ${.CURDIR}/test-exec.sh ${.OBJDIR} ${.CURDIR}/$${TEST}) || exit $$?; \
 201         done
 202
 203 # Not run by default
 204 interop: ${INTEROP_TARGETS}
 205
 206 # Unit tests, built by top-level Makefile
 207 unit:
 208         set -e ; if test -z "${SKIP_UNIT}" ; then \
 209                 V="" ; \
 210                 test "x${USE_VALGRIND}" = "x" || \
 211                     V=${.CURDIR}/valgrind-unit.sh ; \
 212                 $$V ${.OBJDIR}/unittests/sshbuf/test_sshbuf ; \
 213                 $$V ${.OBJDIR}/unittests/sshkey/test_sshkey \
 214                         -d ${.CURDIR}/unittests/sshkey/testdata ; \
 215                 $$V ${.OBJDIR}/unittests/bitmap/test_bitmap ; \
 216                 $$V ${.OBJDIR}/unittests/kex/test_kex ; \
 217                 $$V ${.OBJDIR}/unittests/hostkeys/test_hostkeys \
 218                         -d ${.CURDIR}/unittests/hostkeys/testdata ; \
 219         fi