3 # @(#)ttys 5.1 (Berkeley) 4/17/89
5 # This file specifies various information about terminals on the system.
6 # It is used by several different programs. Common entries for the
7 # various columns include:
9 # name The name of the terminal device.
11 # getty The program to start running on the terminal. Typically a
12 # getty program, as the name implies. Other common entries
13 # include none, when no getty is needed, and xdm, to start the
16 # type The initial terminal type for this port. For hardwired
17 # terminal lines, this will contain the type of terminal used.
18 # For virtual consoles, the correct type is typically xterm.
19 # Other common values include dialup for incoming modem ports, and
20 # unknown when the terminal type cannot be predetermined.
22 # status Must be on or off. If on, init will run the getty program on
23 # the specified port. If the word "secure" appears, this tty
26 # name getty type status comments
28 # If console is marked "insecure", then init will ask for the root password
29 # when going to single-user mode.
30 console none unknown off secure
32 # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
33 ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure
34 ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure
35 ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure
36 ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure