3 # NOTE: Please would any committer updating this file also update the
4 # make.conf(5) manual page, if necessary, which is located in
5 # src/share/man/man5/make.conf.5.
7 # /etc/make.conf, if present, will be read by make (see
8 # /usr/share/mk/sys.mk). It allows you to override macro definitions
9 # to make without changing your source tree, or anything the source
12 # This file must be in valid Makefile syntax.
14 # There are additional things you can put into /etc/make.conf.
15 # You have to find those in the Makefiles and documentation of
19 # The CPUTYPE variable controls which processor should be targetted for
20 # generated code. This controls processor-specific optimizations in
21 # certain code (currently only OpenSSL) as well as modifying the value
22 # of CFLAGS to contain the appropriate optimization directive to gcc.
23 # The automatic setting of CFLAGS may be overridden using the
24 # NO_CPU_CFLAGS variable below.
25 # Currently the following CPU types are recognised:
26 # Intel x86 architecture:
27 # (AMD CPUs) k7 k6-2 k6 k5
28 # (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
29 # Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4
30 # Intel ia64 architecture: itanium
33 #NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
34 #NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
36 # CFLAGS controls the compiler settings used when compiling C code.
37 # Note that optimization settings above -O (-O2, ...) are not recommended
38 # or supported for compiling the world or the kernel - please revert any
39 # nonstandard optimization settings to "-O" before submitting bug reports
41 # Note also that at this time the -O2 setting is known to produce BROKEN
42 # CODE on the Alpha platform.
46 # CXXFLAGS controls the compiler settings used when compiling C++ code.
47 # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
48 # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
49 # alone will remove the often needed contents of CFLAGS from CXXFLAGS.
51 #CXXFLAGS+= -fmemoize-lookups -fsave-memoized
53 # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
54 # for use in developing FreeBSD and testing changes. They can be used by
55 # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
56 # included here due to compiler bugs, eg: mkdir()'s mode_t argument.
58 #BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
59 # -Wcast-qual -Wchar-subscripts -Winline \
60 # -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
61 # -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
63 # To compile just the kernel with special optimizations, you should use
64 # this instead of CFLAGS (which is not applicable to kernel builds anyway).
65 # There is very little to gain by using higher optimization levels, and doing
66 # so can cause problems.
70 # To build the system compiler such that it forces high optimization levels to
71 # a lower one. GCC -O2+ is known to trigger known optimizer bugs at various
72 # times -- this is worse on the Alpha platform. The value assigned here will
73 # be the highest optimization value used.
74 #WANT_FORCE_OPTIMIZATION_DOWNGRADE=1
76 # Compare before install
79 # Mtree will follow symlinks
80 #MTREE_FOLLOWS_SYMLINKS= -L
82 # To build ppp with normal permissions
85 # To enable installing ssh(1) with the setuid bit turned on
86 #ENABLE_SUID_SSH= true
88 # To avoid building various parts of the base system:
89 #NO_CVS= true # do not build CVS
90 #NO_CXX= true # do not build C++ and friends
91 #NO_BIND= true # do not build BIND
92 #NO_FORTRAN= true # do not build g77 and related libraries
93 #NO_GDB= true # do not build GDB
94 #NO_I4B= true # do not build isdn4bsd package
95 #NO_IPFILTER= true # do not build IP Filter package
96 #NO_LPR= true # do not build lpr and related programs
97 #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
98 #NO_MODULES= true # do not build modules with the kernel
99 #NO_OBJC= true # do not build Objective C support
100 #NO_OPENSSH= true # do not build OpenSSH
101 #NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
102 #NO_SENDMAIL= true # do not build sendmail and related programs
103 #NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
104 #NO_TCSH= true # do not build and install /bin/csh (which is tcsh)
105 #NO_X= true # do not compile in XWindows support (e.g. doscmd)
106 #NOCRYPT= true # do not build any crypto code
107 #NOGAMES= true # do not build games (games/ subdir)
108 #NOINFO= true # do not make or install info files
109 #NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
110 #NOPROFILE= true # Avoid compiling profiled libraries
111 #NOSECURE= true # do not build crypto code in secure/ subdir
112 #NOSHARE= true # do not go into the share subdir
113 #NOUUCP= true # do not build uucp related programs
115 # To build the OpenSSL manpages, uncomment the following. These are not
116 # built by default because they clobber a number of system manpages with
117 # manpages describing parts of the OpenSSL toolkit, including passwd(1),
118 # err(3), md5(3), and others.
120 #WANT_OPENSSL_MANPAGES= true
122 # To build sys/modules when building the world (our old way of doing things)
123 #MODULES_WITH_WORLD=true # do not build modules when building kernel
125 # The list of modules to build instead of all of them.
126 #MODULES_OVERRIDE= linux ipfw
128 # The following controls building optional IDEA code in libcrypto and
129 # certain ports. Patents are involved - you must not use this unless
130 # you either have a license or fall within patent 'fair use'
133 # *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
135 # IDEA is patented in the USA and many european countries - thought to
136 # be OK to use for any non-commercial use. This is optional.
137 #MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
139 # To avoid running MAKEDEV all on /dev during install set NO_MAKEDEV_RUN.
140 # If you don't want to install MAKEDEV set NO_MAKEDEV_INSTALL, this implies
142 #NO_MAKEDEV_INSTALL= true
143 #NO_MAKEDEV_RUN= true
145 # If you do not want unformatted manual pages to be compressed
146 # when they are installed:
151 # If you want the "compat" shared libraries installed as part of your normal
152 # builds, uncomment these:
162 # Default format for system documentation, depends on your printer.
163 # Set this to "ascii" for simple printers or screen
168 # How long to wait for a console keypress before booting the default kernel.
169 # This value is approximately in milliseconds. Keypresses are accepted by the
170 # BIOS before booting from disk, making it possible to give custom boot
171 # parameters even when this is set to 0.
176 # By default, the system will always use the keyboard/video card as system
177 # console. However, the boot blocks may be dynamically configured to use a
178 # serial port in addition to or instead of the keyboard/video console.
180 # By default we use COM1 as our serial console port *if* we're going to use
181 # a serial port as our console at all. Alter as necessary.
183 # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
185 #BOOT_COMCONSOLE_PORT= 0x3F8
187 # The default serial console speed is 9600. Set the speed to a larger value
188 # for better interactive response.
190 #BOOT_COMCONSOLE_SPEED= 115200
192 # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
193 # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
194 # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
195 # still mount the server's '/' (i.e. rather then load the server's kernel).
197 #LOADER_TFTP_SUPPORT= YES
201 # If you want KerberosIV (KTH eBones), define this:
207 # If you want Kerberos 5 (KTH Heimdal), define this:
211 # Kerberos 5 su (k5su)
212 # If you want to use the k5su utility, define this to have it installed
214 #ENABLE_SUID_K5SU= yes
218 # If you want to install MIT Kerberos5 port somewhere other than /usr/local,
219 # define this (this is also used to tell ssh1 that kerberos is needed):
221 #KRB5_HOME= /usr/local
224 # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
225 # file(s) you use on your site (see /usr/share/examples/cvsup/README for more
226 # information on CVSup and these files). To use, do "make update" in /usr/src.
230 #SUP= /usr/local/bin/cvsup
232 #SUPHOST= cvsup.uk.FreeBSD.org
233 #SUPFILE= /usr/share/examples/cvsup/standard-supfile
234 #PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
235 #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
237 # top(1) uses a hash table for the user names. The size of this hash
238 # can be tuned to match the number of local users. The table size should
239 # be a prime number approximately twice as large as the number of lines in
240 # /etc/passwd. The default number is 20011.
246 # The list of languages and encodings to build and install
248 #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
253 # The following sets the default m4 configuration file to use at
254 # install time. Use with caution as a make install will overwrite
255 # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
256 # deprecated. The value should be a fully qualified path name.
258 #SENDMAIL_MC=/etc/mail/myconfig.mc
260 # The following sets the default m4 configuration file for mail
261 # submission to use at install time. Use with caution as a make
262 # install will overwrite any existing /etc/mail/submit.cf. The
263 # value should be a fully qualified path name.
265 #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
267 # If you need to build additional .cf files during a make buildworld,
268 # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
270 #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
272 # Setting the following variable modifies the flags passed to m4 when
273 # building a .cf file from a .mc file. It can be used to enable
274 # features disabled by default.
278 # Setting the following variables modifies the build environment for
279 # sendmail and its related utilities. For example, SASL support can be
280 # added with settings such as:
282 # SENDMAIL_CFLAGS=-I/usr/local/include/sasl -DSASL
283 # SENDMAIL_LDFLAGS=-L/usr/local/lib
284 # SENDMAIL_LDADD=-lsasl
286 # Note: If you are using Cyrus SASL with other applications which require
287 # access to the sasldb file, you should add the following to your
290 # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
297 # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
298 # set-user-ID root binary instead of a set-group-ID smmsp binary and will
299 # prevent the installation of /etc/mail/submit.cf.
300 # This is a deprecated mode of operation. See etc/mail/README for more
303 #SENDMAIL_SET_USER_ID=