2 .\" Copyright (c) 2000 Jeroen Ruigrok van der Werven
3 .\" All rights reserved.
5 .\" Redistribution and use in source and binary forms, with or without
6 .\" modification, are permitted provided that the following conditions
8 .\" 1. Redistributions of source code must retain the above copyright
9 .\" notice, this list of conditions and the following disclaimer.
10 .\" 2. The name of the author may not be used to endorse or promote products
11 .\" derived from this software without specific prior written permission
13 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14 .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16 .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19 .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20 .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 .Nd MegaRAID SCSI/ATA/SATA RAID driver
38 driver provides support for LSI Logic MegaRAID SCSI
39 RAID controllers and legacy American Megatrends MegaRAID
40 SCSI RAID controllers, including models relabeled
41 and sold by Dell and Hewlett-Packard.
43 Controllers supported by the
81 MegaRAID Enterprise 1200 (Series 428)
83 MegaRAID Enterprise 1300 (Series 434)
85 MegaRAID Enterprise 1400 (Series 438)
87 MegaRAID Enterprise 1500 (Series 467)
89 MegaRAID Enterprise 1600 (Series 471)
91 MegaRAID Elite 1500 (Series 467)
93 MegaRAID Elite 1600 (Series 493)
95 MegaRAID Elite 1650 (Series 4xx)
97 MegaRAID Express 100 (Series 466WS)
99 MegaRAID Express 200 (Series 466)
101 MegaRAID Express 300 (Series 490)
103 MegaRAID Express 500 (Series 475)
133 HP NetRAID-3/Si (D4943A)
137 Intel RAID Controller SRCS16
139 Intel RAID Controller SRCU42X
142 .Ss Driver initialisation/shutdown phase
144 .It amr%d: memory window not available
145 .It amr%d: I/O window not available
147 The PCI BIOS did not allocate resources necessary for the correct operation of
149 The driver cannot attach to this controller.
150 .It amr%d: busmaster bit not set, enabling
152 The PCI BIOS did not enable busmaster DMA,
153 which is required for the correct operation of the controller.
154 The driver has enabled this bit and initialisation will proceed.
155 .It amr%d: can't allocate register window
156 .It amr%d: can't allocate interrupt
157 .It amr%d: can't set up interrupt
158 .It amr%d: can't allocate parent DMA tag
159 .It amr%d: can't allocate buffer DMA tag
160 .It amr%d: can't allocate scatter/gather DMA tag
161 .It amr%d: can't allocate s/g table
162 .It amr%d: can't allocate mailbox tag
163 .It amr%d: can't allocate mailbox memory
165 A resource allocation error occurred while initialising the driver;
166 initialisation has failed and the driver will not attach to this controller.
167 .It amr%d: can't obtain configuration data from controller
168 .It amr%d: can't obtain product data from controller
170 The driver was unable to obtain vital configuration data from the controller.
171 Initialisation has failed and the driver will not attach to this controller.
172 .It amr%d: can't establish configuration hook
173 .It amr%d: can't scan controller for drives
175 The scan for logical drives managed by the controller failed.
176 No drives will be attached.
177 .It amr%d: device_add_child failed
178 .It amr%d: bus_generic_attach returned %d
180 Creation of the logical drive instances failed;
181 attachment of one or more logical drives may have been aborted.
182 .It amr%d: flushing cache...
184 The controller cache is being flushed prior to shutdown or detach.
186 .Ss Operational diagnostics
188 .It amr%d: I/O beyond end of unit (%u,%d > %u)
190 A partitioning error or disk corruption has caused an I/O request
191 beyond the end of the logical drive.
192 This may also occur if FlexRAID Virtual Sizing is enabled and
193 an I/O operation is attempted on a portion of the virtual drive
194 beyond the actual capacity available.
195 .It amr%d: polled command timeout
197 An initialisation command timed out.
198 The initialisation process may fail as a result.
199 .It amr%d: bad slot %d completed
201 The controller reported completion of a command that the driver did not issue.
202 This may result in data corruption,
203 and suggests a hardware or firmware problem with the system or controller.
204 .It amr%d: I/O error - %x
206 An I/O error has occurred.
217 driver was written by
219 .Aq msmith@FreeBSD.org .
221 This manual page was written by
223 .Aq msmith@FreeBSD.org
225 .An Jeroen Ruigrok van der Werven
226 .Aq asmodai@FreeBSD.org .