2 .\" Copyright (c) 2000 Jeroen Ruigrok van der Werven
3 .\" All rights reserved.
5 .\" Redistribution and use in source and binary forms, with or without
6 .\" modification, are permitted provided that the following conditions
8 .\" 1. Redistributions of source code must retain the above copyright
9 .\" notice, this list of conditions and the following disclaimer.
10 .\" 2. The name of the author may not be used to endorse or promote products
11 .\" derived from this software without specific prior written permission
13 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14 .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16 .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19 .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20 .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 .Nd MegaRAID SCSI/ATA/SATA RAID driver
38 driver provides support for LSI Logic MegaRAID SCSI
39 RAID controllers and legacy American Megatrends MegaRAID
40 SCSI RAID controllers, including models relabeled
41 and sold by Dell and Hewlett-Packard.
43 Controllers supported by the
81 MegaRAID Enterprise 1200 (Series 428)
83 MegaRAID Enterprise 1300 (Series 434)
85 MegaRAID Enterprise 1400 (Series 438)
87 MegaRAID Enterprise 1500 (Series 467)
89 MegaRAID Enterprise 1600 (Series 471)
91 MegaRAID Elite 1500 (Series 467)
93 MegaRAID Elite 1600 (Series 493)
95 MegaRAID Elite 1650 (Series 4xx)
97 MegaRAID Express 100 (Series 466WS)
99 MegaRAID Express 200 (Series 466)
101 MegaRAID Express 300 (Series 490)
103 MegaRAID Express 500 (Series 475)
125 HP NetRAID-3/Si (D4943A)
129 Intel RAID Controller SRCS16
131 Intel RAID Controller SRCU42X
134 .Ss Driver initialisation/shutdown phase
136 .It amr%d: memory window not available
137 .It amr%d: I/O window not available
139 The PCI BIOS did not allocate resources necessary for the correct operation of
141 The driver cannot attach to this controller.
142 .It amr%d: busmaster bit not set, enabling
144 The PCI BIOS did not enable busmaster DMA,
145 which is required for the correct operation of the controller.
146 The driver has enabled this bit and initialisation will proceed.
147 .It amr%d: can't allocate register window
148 .It amr%d: can't allocate interrupt
149 .It amr%d: can't set up interrupt
150 .It amr%d: can't allocate parent DMA tag
151 .It amr%d: can't allocate buffer DMA tag
152 .It amr%d: can't allocate scatter/gather DMA tag
153 .It amr%d: can't allocate s/g table
154 .It amr%d: can't allocate mailbox tag
155 .It amr%d: can't allocate mailbox memory
157 A resource allocation error occurred while initialising the driver;
158 initialisation has failed and the driver will not attach to this controller.
159 .It amr%d: can't obtain configuration data from controller
160 .It amr%d: can't obtain product data from controller
162 The driver was unable to obtain vital configuration data from the controller.
163 Initialisation has failed and the driver will not attach to this controller.
164 .It amr%d: can't establish configuration hook
165 .It amr%d: can't scan controller for drives
167 The scan for logical drives managed by the controller failed.
168 No drives will be attached.
169 .It amr%d: device_add_child failed
170 .It amr%d: bus_generic_attach returned %d
172 Creation of the logical drive instances failed;
173 attachment of one or more logical drives may have been aborted.
174 .It amr%d: flushing cache...
176 The controller cache is being flushed prior to shutdown or detach.
178 .Ss Operational diagnostics
180 .It amr%d: I/O beyond end of unit (%u,%d > %u)
182 A partitioning error or disk corruption has caused an I/O request
183 beyond the end of the logical drive.
184 This may also occur if FlexRAID Virtual Sizing is enabled and
185 an I/O operation is attempted on a portion of the virtual drive
186 beyond the actual capacity available.
187 .It amr%d: polled command timeout
189 An initialisation command timed out.
190 The initialisation process may fail as a result.
191 .It amr%d: bad slot %d completed
193 The controller reported completion of a command that the driver did not issue.
194 This may result in data corruption,
195 and suggests a hardware or firmware problem with the system or controller.
196 .It amr%d: I/O error - %x
198 An I/O error has occurred.
209 driver was written by
211 .Aq msmith@FreeBSD.org .
213 This manual page was written by
215 .Aq msmith@FreeBSD.org
217 .An Jeroen Ruigrok van der Werven
218 .Aq asmodai@FreeBSD.org .