1 .\" Copyright (c) 2004-2006
2 .\" Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\" notice unmodified, this list of conditions, and the following
10 .\" 2. Redistributions in binary form must reproduce the above copyright
11 .\" notice, this list of conditions and the following disclaimer in the
12 .\" documentation and/or other materials provided with the distribution.
14 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 .Nd "Intel PRO/Wireless 2100 IEEE 802.11 driver"
35 To compile this driver into the kernel,
36 place the following lines in your
37 kernel configuration file:
38 .Bd -ragged -offset indent
45 Alternatively, to load the driver as a
46 module at boot time, place the following lines in
48 .Bd -literal -offset indent
56 driver provides support for the
58 PRO/Wireless 2100 MiniPCI network adapter.
62 driver configures the adapter for BSS operation (aka infrastructure mode).
63 This mode requires the use of an access point.
65 For more information on configuring this device, see
68 This driver requires firmware to be loaded before it will work.
69 You need to install the
70 .Pa ports/net/ipw-firmware-kmod
75 Join an existing BSS network (i.e., connect to an access point):
77 .Dl "ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00"
79 Join a specific BSS network with network name
82 .Dl "ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net"
84 Join a specific BSS network with 40-bit WEP encryption:
85 .Bd -literal -offset indent
86 ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
87 wepmode on wepkey 0x1234567890 weptxkey 1
90 Join a specific BSS network with 104-bit WEP encryption:
91 .Bd -literal -offset indent
92 ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
93 wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
97 .It "ipw%d: device timeout"
98 The driver will reset the hardware.
99 This should not happen.
100 .It "ipw%d: firmware error"
101 The onboard microcontroller crashes for some reason.
102 The driver will reset the hardware.
103 This should not happen.
104 .It "ipw%d: timeout waiting for firmware initialization to complete"
105 The onboard microcontroller failed to initialize in time.
106 This should not happen.
107 .It "ipw%d: could not load firmware image '%s'"
108 The driver failed to load the firmware image using the
112 .Pa ports/net/ipw-firmware-kmod
113 port is installed correctly.
114 .It "ipw%d: could not load microcode"
115 An attempt to upload the microcode image to the onboard microcontroller failed.
116 This should not happen.
117 .It "ipw%d: could not load firmware"
118 An attempt to upload the firmware image to the onboard microcontroller failed.
119 This should not happen.
131 .%O http://damien.bergamini.free.fr/ipw/
136 driver was written by
137 .An Damien Bergamini Aq damien@FreeBSD.org .