]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - share/man/man4/iwm.4
Merge OpenSSL 1.0.2f.
[FreeBSD/FreeBSD.git] / share / man / man4 / iwm.4
1 .\" Copyright (c) 2004-2006
2 .\"     Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
3 .\"
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
6 .\" are met:
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\"    notice unmodified, this list of conditions, and the following
9 .\"    disclaimer.
10 .\" 2. Redistributions in binary form must reproduce the above copyright
11 .\"    notice, this list of conditions and the following disclaimer in the
12 .\"    documentation and/or other materials provided with the distribution.
13 .\"
14 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 .\" SUCH DAMAGE.
25 .\"
26 .\" $FreeBSD$
27 .\"
28 .Dd July 1, 2015
29 .Dt IWM 4
30 .Os
31 .Sh NAME
32 .Nm iwm
33 .Nd Intel IEEE 802.11ac wireless network driver
34 .Sh SYNOPSIS
35 To compile this driver into the kernel,
36 include the following lines in your
37 kernel configuration file:
38 .Bd -ragged -offset indent
39 .Cd "device iwm"
40 .Cd "device pci"
41 .Cd "device wlan"
42 .Cd "device firmware"
43 .Ed
44 .Pp
45 You also need to select a firmware for your device.
46 Choose one from:
47 .Bd -ragged -offset indent
48 .Cd "device iwm3160fw"
49 .Cd "device iwm7260fw"
50 .Cd "device iwm7265fw"
51 .Ed
52 .Pp
53 Or you can use
54 .Bd -ragged -offset indent
55 .Cd "device iwmfw"
56 .Ed
57 .Pp
58 to include them all.
59 .Pp
60 Alternatively, to load the driver as a
61 module at boot time, place the following lines in
62 .Xr loader.conf 5 :
63 .Bd -literal -offset indent
64 if_iwm_load="YES"
65 iwm3160fw_load="YES"
66 iwm7260fw_load="YES"
67 iwm7265fw_load="YES"
68 .Ed
69 .Sh DESCRIPTION
70 The
71 .Nm
72 driver provides support for:
73 .Pp
74 .Bl -tag -width Ds -offset indent -compact
75 .It Intel Dual Band Wireless AC 3160
76 .It Intel Dual Band Wireless AC 7260
77 .It Intel Dual Band Wireless AC 7265
78 .El
79 .Pp
80 .Nm
81 supports
82 .Cm station
83 mode operation.
84 Only one virtual interface may be configured at any time.
85 For more information on configuring this device, see
86 .Xr ifconfig 8 .
87 .Pp
88 This driver requires the firmware built with the
89 .Nm iwmfw
90 module to work.
91 .Sh EXAMPLES
92 Join an existing BSS network (i.e., connect to an access point):
93 .Bd -literal -offset indent
94 ifconfig wlan create wlandev iwm0 inet 192.168.0.20 \e
95     netmask 0xffffff00
96 .Ed
97 .Pp
98 Join a specific BSS network with network name
99 .Dq Li my_net :
100 .Pp
101 .Dl "ifconfig wlan create wlandev iwm0 ssid my_net up"
102 .Pp
103 Join a specific BSS network with 64-bit WEP encryption:
104 .Bd -literal -offset indent
105 ifconfig wlan create wlandev iwm0 ssid my_net \e
106         wepmode on wepkey 0x1234567890 weptxkey 1 up
107 .Ed
108 .Pp
109 Join a specific BSS network with 128-bit WEP encryption:
110 .Bd -literal -offset indent
111 ifconfig wlan create wlandev iwm0 wlanmode adhoc ssid my_net \e
112     wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
113 .Ed
114 .Sh DIAGNOSTICS
115 .Bl -diag
116 .It "iwm%d: device timeout"
117 The driver will reset the hardware.
118 This should not happen.
119 .It "iwm%d: firmware error"
120 The onboard microcontroller crashed for some reason.
121 The driver will reset the hardware.
122 This should not happen.
123 .It "iwm%d: timeout waiting for firmware initialization to complete"
124 The onboard microcontroller failed to initialize in time.
125 This should not happen.
126 .It "iwm%d: could not load firmware image '%s'"
127 The driver failed to load the firmware image using the
128 .Xr firmware 9
129 subsystem.
130 Verify the
131 .Xr iwmfw 4
132 firmware module is present.
133 .It "iwm%d: could not load boot firmware"
134 An attempt to upload the boot firmware image to the onboard microcontroller
135 failed.
136 This should not happen.
137 .It "iwm%d: could not load microcode"
138 An attempt to upload the microcode image to the onboard microcontroller failed.
139 This should not happen.
140 .It "iwm%d: could not load main firmware"
141 An attempt to upload the main firmware image to the onboard microcontroller
142 failed.
143 This should not happen.
144 .El
145 .Sh SEE ALSO
146 .Xr iwmfw 4 ,
147 .Xr pci 4 ,
148 .Xr wlan 4 ,
149 .Xr wlan_ccmp 4 ,
150 .Xr wlan_tkip 4 ,
151 .Xr wlan_wep 4 ,
152 .Xr ifconfig 8 ,
153 .Xr wpa_supplicant 8