1 .\" $NetBSD: uplcom.4,v 1.9 2002/02/07 03:15:09 ross Exp $
3 .\" Copyright (c) 2001 The NetBSD Foundation, Inc.
4 .\" All rights reserved.
6 .\" This code is derived from software contributed to The NetBSD Foundation
7 .\" by Lennart Augustsson.
9 .\" Redistribution and use in source and binary forms, with or without
10 .\" modification, are permitted provided that the following conditions
12 .\" 1. Redistributions of source code must retain the above copyright
13 .\" notice, this list of conditions and the following disclaimer.
14 .\" 2. Redistributions in binary form must reproduce the above copyright
15 .\" notice, this list of conditions and the following disclaimer in the
16 .\" documentation and/or other materials provided with the distribution.
18 .\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
19 .\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
20 .\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
21 .\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
22 .\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 .\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 .\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 .\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 .\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 .\" POSSIBILITY OF SUCH DAMAGE.
37 .Nd USB support for Prolific PL-2303/2303X/2303HX serial adapters driver
39 To compile this driver into the kernel,
40 place the following lines in your
41 kernel configuration file:
42 .Bd -ragged -offset indent
48 Alternatively, to load the driver as a
49 module at boot time, place the following line in
51 .Bd -literal -offset indent
57 driver provides support for various serial adapters based on the Prolific
58 PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.
60 The device is accessed through the
62 driver which makes it behave like a
67 driver supports the following devices and adapters:
71 ADLINK ND-6530 USB-Serial Adapter
73 Alcatel One Touch 535/735 Phone
75 Alcor AU9720 USB-RS232 Serial Adapter
79 Alltronix ACM003U00 Modem
87 BAFO BF-800 and BF-810
93 Corega CG-USBRS232R Serial Adapter
95 Cressi Edy (Seiko) Diving Computer
97 ELECOM UC-SGT Serial Adapter
99 HAL Corporation Crossam2+USB IR commander
101 Hama USB RS-232 Serial Adapter
103 Hamlet exaggerate XURS232
105 HP LD220 Point-Of-Sale (POS) Display
109 I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
111 iTegno WM1080A GSM/GFPRS Modem
113 iTegno WM2080A CDMA Modem
121 Mobile Action MA-620 Infrared Adapter
129 Panasonic TY-TP50P6-S flat screen
131 PLX CA-42 Phone Cable
133 PLANEX USB-RS232 URS-03
135 Prolific Generic USB-Serial Adapters
137 Prolific Generic USB-Serial Adapters (HXN)
139 Prolific Pharos USB-Serial Adapter
141 Prolific USB-Serial Controller D
145 Radio Shack USB Serial Cable
147 Sagem USB-Serial Adapter
149 Samsung I330 Phone Cradle
151 Sandberg USB to Serial Link (model number 133-08)
153 Sanwa KB-USB2 Multimeter cable
155 Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
157 Sitecom USB-Serial Adapter
159 SMART Technologies USB-Serial Adapter
163 Sony Ericsson Datapilot
165 Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
167 SOURCENEXT KeikaiDenwa 8 (with and without charger)
169 Speed Dragon USB-Serial Cable
171 Syntech CPT-8001C Barcode Scanner
173 TDK UHA6400 and UPA9664 USB-PHS Adapters
175 TRENDnet USB to Serial Converter (TU-S9)
177 Tripp-Lite U209-000-R USB-Serial Adapter
179 UIC HCR331 Magnetic Stripe Card Reader
181 UIC MSR206 Magnetic Stripe Card Reader
183 Willcom W-SIM DD PHS terminal.(WS002IN)
185 YC-Cable USB-Serial Adapter
187 Zeagle N2iTion3 Diving Computer
190 The following variables are available as both
195 .Bl -tag -width indent
196 .It Va hw.usb.uplcom.debug
197 Debug output level, where 0 is debugging disabled and larger values increase
198 debug message verbosity.
202 .Bl -tag -width "/dev/ttyU*.init" -compact
205 .It Pa /dev/ttyU*.init
206 .It Pa /dev/ttyU*.lock
207 corresponding callin initial-state and lock-state devices
211 .It Pa /dev/cuaU*.init
212 .It Pa /dev/cuaU*.lock
213 corresponding callout initial-state and lock-state devices
225 This manual page was adopted from
228 .An Tom Rhodes Aq Mt trhodes@FreeBSD.org