1 .\" $OpenBSD: uslcom.4,v 1.6 2007/10/08 03:10:42 jcs Exp $
3 .\" Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org>
5 .\" Permission to use, copy, modify, and distribute this software for any
6 .\" purpose with or without fee is hereby granted, provided that the above
7 .\" copyright notice and this permission notice appear in all copies.
9 .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
24 .Nd Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105 based USB serial adapter
26 To compile this driver into the kernel,
27 place the following lines in your
28 kernel configuration file:
29 .Bd -ragged -offset indent
35 Alternatively, to load the driver as a
36 module at boot time, place the following line in
38 .Bd -literal -offset indent
44 driver supports Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105
45 based USB serial adapters.
47 The following devices should work with the
53 AC-Services CAN, CIS-IBUS, IBUS and OBD interfaces
57 AKTACOM ACE-1001 cable
59 AMBER Wireless AMB2560
65 Arygon Technologies Mifare RFID Reader
67 AVIT Research USB-TTL interface
77 Burnside Telecom Desktop Mobile
79 chip45.com Crumb128 module
81 Clipsal 5000CT2, 5500PACA, 5500PCU, 560884, 5800PC, C5000CT2
82 and L51xx C-Bus Home Automation products
84 Commander 2 EDGE(GSM) Modem
86 Cygnal Fasttrax GPS and Debug adapter
88 DataApex MultiCOM USB to RS232 converter
90 Degree Controls USB adapter
92 DekTec DTA Plus VHF/UHF Booster
94 Dell DW700 GPS Receiver
96 Digianswer ZigBee/802.15.4 MAC
98 Dynastream ANT Development kits
100 Elan USBcount50, USBscope50, USBpulse100 and USBwave12
102 ELV USB-I2C interface
104 EMS C1007 HF RFID controller
106 Festo CPX-USB and CMSP interfaces
108 Gemalto Prox-PU/CU contactless card reader
110 Helicomm IP-Link 1220-DVM
112 IMS USB-RS422 adapter
114 Infinity GPS-MIC-1 Radio Monophone
118 IRZ SG-10 and MC35pu GSM/GPRS Modems
122 Kamstrup M-Bus Master MultiPort 250D
123 and Optical Eye/3 wire utility meter interfaces
127 Link Instruments MS-019 and MS-028
128 Oscilloscope/Logic Analyzer/Pattern Generators
130 Lipowsky Baby-JTAG, Baby-LIN and HARP-1
132 MEI CashFlow SC and Series 2000 cash acceptors
134 MJS USB-TOSLINK Adapter
136 MobiData GPRS USB Modems
142 Optris MSpro LT Thermometer
144 Owen AC4 USB-RS485 converter
146 Pirelli DP-L10 SIP phone
148 PLX CA-42 Phone cable
152 Procyon AVS Mind Machine
154 Renesas RX-Stick for RX610
158 Silicon Laboratories generic CP2101/CP2102/CP2103/CP2104/CP2105 chips
160 Software Bisque Paramount ME
162 SPORTident BSM7-D USB
164 Suunto Sports Instrument
166 Syntech CipherLab USB Barcode Scanner
168 T-Com TC 300 SIP phone
170 Tams Master Easy Control
178 Track Systems Traqmate
180 Vaisala USB Instrument cable
184 WAGO 750-923 USB Service Cable
186 WaveSense Jazz Blood Glucose Meter
188 WIENER Plein & Baus CML Data Logger, RCM Remote,
189 and PL512 and MPOD PSUs
191 WMR RIGblaster Plug&Play and RIGtalk RT1
196 .Bl -tag -width "/dev/ttyU?.init" -compact
199 .It Pa /dev/ttyU?.init
200 .It Pa /dev/ttyU?.lock
201 corresponding callin initial-state and lock-state devices
205 .It Pa /dev/cuaU?.init
206 .It Pa /dev/cuaU?.lock
207 corresponding callout initial-state and lock-state devices
216 device driver first appeared in
220 release to include it was
225 driver was written by
226 .An Jonathan Gray Aq Mt jsg@openbsd.org .