]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - src/arm/exynos3250-monk.dts
Import DTS from Linux 5.8
[FreeBSD/FreeBSD.git] / src / arm / exynos3250-monk.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Samsung's Exynos3250 based Monk board device tree source
4  *
5  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6  *              http://www.samsung.com
7  *
8  * Device tree source file for Samsung's Monk board which is based on
9  * Samsung Exynos3250 SoC.
10  */
11
12 /dts-v1/;
13 #include "exynos3250.dtsi"
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/clock/samsung,s2mps11.h>
18
19 / {
20         model = "Samsung Monk board";
21         compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
22
23         aliases {
24                 i2c7 = &i2c_max77836;
25         };
26
27         memory@40000000 {
28                 device_type = "memory";
29                 reg =  <0x40000000 0x1ff00000>;
30         };
31
32         firmware@205f000 {
33                 compatible = "samsung,secure-firmware";
34                 reg = <0x0205F000 0x1000>;
35         };
36
37         gpio_keys {
38                 compatible = "gpio-keys";
39
40                 power_key {
41                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
42                         linux,code = <KEY_POWER>;
43                         label = "power key";
44                         debounce-interval = <10>;
45                         wakeup-source;
46                 };
47         };
48
49         vemmc_reg: voltage-regulator-0 {
50                 compatible = "regulator-fixed";
51                 regulator-name = "V_EMMC_2.8V-fixed";
52                 regulator-min-microvolt = <2800000>;
53                 regulator-max-microvolt = <2800000>;
54                 gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
55                 enable-active-high;
56         };
57
58         i2c_max77836: i2c-gpio-0 {
59                 compatible = "i2c-gpio";
60                 sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
61                 scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
62                 #address-cells = <1>;
63                 #size-cells = <0>;
64
65                 max77836: subpmic@25 {
66                         compatible = "maxim,max77836";
67                         interrupt-parent = <&gpx1>;
68                         interrupts = <5 IRQ_TYPE_NONE>;
69                         reg = <0x25>;
70                         wakeup-source;
71
72                         muic: max77836-muic {
73                                 compatible = "maxim,max77836-muic";
74                         };
75
76                         regulators {
77                                 compatible = "maxim,max77836-regulator";
78                                 safeout_reg: SAFEOUT {
79                                         regulator-name = "SAFEOUT";
80                                 };
81
82                                 charger_reg: CHARGER {
83                                         regulator-name = "CHARGER";
84                                         regulator-min-microamp = <45000>;
85                                         regulator-max-microamp = <475000>;
86                                         regulator-boot-on;
87                                 };
88
89                                 motor_reg: LDO1 {
90                                         regulator-name = "MOT_2.7V";
91                                         regulator-min-microvolt = <1100000>;
92                                         regulator-max-microvolt = <2700000>;
93                                 };
94
95                                 LDO2 {
96                                         regulator-name = "UNUSED_LDO2";
97                                         regulator-min-microvolt = <800000>;
98                                         regulator-max-microvolt = <3950000>;
99                                 };
100                         };
101
102                         charger {
103                                 compatible = "maxim,max77836-charger";
104
105                                 maxim,constant-uvolt = <4350000>;
106                                 maxim,fast-charge-uamp = <225000>;
107                                 maxim,eoc-uamp = <7500>;
108                                 maxim,ovp-uvolt = <6500000>;
109                         };
110                 };
111         };
112
113         haptics {
114                 compatible = "regulator-haptic";
115                 haptic-supply = <&motor_reg>;
116                 min-microvolt = <1100000>;
117                 max-microvolt = <2700000>;
118         };
119
120         thermal-zones {
121                 cpu_thermal: cpu-thermal {
122                         cooling-maps {
123                                 map0 {
124                                         /* Correspond to 500MHz at freq_table */
125                                         cooling-device = <&cpu0 5 5>,
126                                                          <&cpu1 5 5>;
127                                 };
128                                 map1 {
129                                         /* Correspond to 200MHz at freq_table */
130                                         cooling-device = <&cpu0 8 8>,
131                                                          <&cpu1 8 8>;
132                                 };
133                         };
134                 };
135         };
136 };
137
138 &adc {
139         vdd-supply = <&ldo3_reg>;
140         status = "okay";
141         assigned-clocks = <&cmu CLK_SCLK_TSADC>;
142         assigned-clock-rates = <6000000>;
143
144         thermistor-ap {
145                 compatible = "ntc,ncp15wb473";
146                 pullup-uv = <1800000>;
147                 pullup-ohm = <100000>;
148                 pulldown-ohm = <100000>;
149                 io-channels = <&adc 0>;
150         };
151
152         thermistor-battery {
153                 compatible = "ntc,ncp15wb473";
154                 pullup-uv = <1800000>;
155                 pullup-ohm = <100000>;
156                 pulldown-ohm = <100000>;
157                 io-channels = <&adc 1>;
158         };
159 };
160
161 &bus_dmc {
162         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
163         vdd-supply = <&buck1_reg>;
164         status = "okay";
165 };
166
167 &cpu0 {
168         cpu0-supply = <&buck2_reg>;
169 };
170
171 &exynos_usbphy {
172         vbus-supply = <&safeout_reg>;
173         status = "okay";
174 };
175
176 &gpu {
177         mali-supply = <&buck3_reg>;
178         status = "okay";
179 };
180
181 &hsotg {
182         vusb_d-supply = <&ldo15_reg>;
183         vusb_a-supply = <&ldo12_reg>;
184         dr_mode = "peripheral";
185         status = "okay";
186 };
187
188 &i2c_0 {
189         #address-cells = <1>;
190         #size-cells = <0>;
191         samsung,i2c-sda-delay = <100>;
192         samsung,i2c-slave-addr = <0x10>;
193         samsung,i2c-max-bus-freq = <100000>;
194         status = "okay";
195
196         s2mps14_pmic@66 {
197                 compatible = "samsung,s2mps14-pmic";
198                 interrupt-parent = <&gpx0>;
199                 interrupts = <7 IRQ_TYPE_NONE>;
200                 reg = <0x66>;
201                 wakeup-source;
202
203                 s2mps14_osc: clocks {
204                         compatible = "samsung,s2mps14-clk";
205                         #clock-cells = <1>;
206                         clock-output-names = "s2mps14_ap", "unused",
207                                 "s2mps14_bt";
208                 };
209
210                 regulators {
211                         ldo1_reg: LDO1 {
212                                 regulator-name = "VAP_ALIVE_1.0V";
213                                 regulator-min-microvolt = <1000000>;
214                                 regulator-max-microvolt = <1000000>;
215                                 regulator-always-on;
216                         };
217
218                         ldo2_reg: LDO2 {
219                                 regulator-name = "VAP_M1_1.2V";
220                                 regulator-min-microvolt = <1200000>;
221                                 regulator-max-microvolt = <1200000>;
222                                 regulator-always-on;
223                         };
224
225                         ldo3_reg: LDO3 {
226                                 regulator-name = "VCC_AP_1.8V";
227                                 regulator-min-microvolt = <1800000>;
228                                 regulator-max-microvolt = <1800000>;
229                                 regulator-always-on;
230                         };
231
232                         ldo4_reg: LDO4 {
233                                 regulator-name = "VAP_AVDD_PLL1";
234                                 regulator-min-microvolt = <1800000>;
235                                 regulator-max-microvolt = <1800000>;
236                                 regulator-always-on;
237                         };
238
239                         ldo5_reg: LDO5 {
240                                 regulator-name = "VAP_PLL_ISO_1.0V";
241                                 regulator-min-microvolt = <1000000>;
242                                 regulator-max-microvolt = <1000000>;
243                                 regulator-always-on;
244                         };
245
246                         ldo6_reg: LDO6 {
247                                 regulator-name = "VAP_MIPI_1.0V";
248                                 regulator-min-microvolt = <1000000>;
249                                 regulator-max-microvolt = <1000000>;
250                         };
251
252                         ldo7_reg: LDO7 {
253                                 regulator-name = "VAP_AVDD_1.8V";
254                                 regulator-min-microvolt = <1800000>;
255                                 regulator-max-microvolt = <1800000>;
256                                 regulator-always-on;
257                         };
258
259                         ldo8_reg: LDO8 {
260                                 regulator-name = "VAP_USB_3.0V";
261                                 regulator-min-microvolt = <3000000>;
262                                 regulator-max-microvolt = <3000000>;
263                                 regulator-always-on;
264                         };
265
266                         ldo9_reg: LDO9 {
267                                 regulator-name = "V_LPDDR_1.2V";
268                                 regulator-min-microvolt = <1200000>;
269                                 regulator-max-microvolt = <1200000>;
270                                 regulator-always-on;
271                         };
272
273                         ldo10_reg: LDO10 {
274                                 regulator-name = "UNUSED_LDO10";
275                                 regulator-min-microvolt = <1000000>;
276                                 regulator-max-microvolt = <1000000>;
277                         };
278
279                         ldo11_reg: LDO11 {
280                                 regulator-name = "V_EMMC_1.8V";
281                                 regulator-min-microvolt = <1800000>;
282                                 regulator-max-microvolt = <1800000>;
283                                 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
284                         };
285
286                         ldo12_reg: LDO12 {
287                                 regulator-name = "V_EMMC_2.8V";
288                                 regulator-min-microvolt = <2800000>;
289                                 regulator-max-microvolt = <2800000>;
290                                 samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
291                         };
292
293                         ldo13_reg: LDO13 {
294                                 regulator-name = "VSENSOR_2.85V";
295                                 regulator-min-microvolt = <2850000>;
296                                 regulator-max-microvolt = <2850000>;
297                                 regulator-always-on;
298                         };
299
300                         ldo14_reg: LDO14 {
301                                 regulator-name = "UNUSED_LDO14";
302                                 regulator-min-microvolt = <1800000>;
303                                 regulator-max-microvolt = <1800000>;
304                         };
305
306                         ldo15_reg: LDO15 {
307                                 regulator-name = "TSP_AVDD_3.3V";
308                                 regulator-min-microvolt = <3300000>;
309                                 regulator-max-microvolt = <3300000>;
310                         };
311
312                         ldo16_reg: LDO16 {
313                                 regulator-name = "LCD_VDD_3.3V";
314                                 regulator-min-microvolt = <3300000>;
315                                 regulator-max-microvolt = <3300000>;
316                         };
317
318                         ldo17_reg: LDO17 {
319                                 regulator-name = "UNUSED_LDO17";
320                                 regulator-min-microvolt = <1800000>;
321                                 regulator-max-microvolt = <1800000>;
322                         };
323
324                         ldo18_reg: LDO18 {
325                                 regulator-name = "UNUSED_LDO18";
326                                 regulator-min-microvolt = <1800000>;
327                                 regulator-max-microvolt = <1800000>;
328                         };
329
330                         ldo19_reg: LDO19 {
331                                 regulator-name = "TSP_VDD_1.8V";
332                                 regulator-min-microvolt = <1800000>;
333                                 regulator-max-microvolt = <1800000>;
334                         };
335
336                         ldo20_reg: LDO20 {
337                                 regulator-name = "LCD_VDD_1.8V";
338                                 regulator-min-microvolt = <1800000>;
339                                 regulator-max-microvolt = <1800000>;
340                         };
341
342                         ldo21_reg: LDO21 {
343                                 regulator-name = "UNUSED_LDO21";
344                                 regulator-min-microvolt = <1000000>;
345                                 regulator-max-microvolt = <1000000>;
346                         };
347
348                         ldo22_reg: LDO22 {
349                                 regulator-name = "UNUSED_LDO22";
350                                 regulator-min-microvolt = <1000000>;
351                                 regulator-max-microvolt = <1000000>;
352                         };
353
354                         ldo23_reg: LDO23 {
355                                 regulator-name = "UNUSED_LDO23";
356                                 regulator-min-microvolt = <1000000>;
357                                 regulator-max-microvolt = <1000000>;
358                                 regulator-always-on;
359                         };
360
361                         ldo24_reg: LDO24 {
362                                 regulator-name = "UNUSED_LDO24";
363                                 regulator-min-microvolt = <1800000>;
364                                 regulator-max-microvolt = <1800000>;
365                         };
366
367                         ldo25_reg: LDO25 {
368                                 regulator-name = "UNUSED_LDO25";
369                                 regulator-min-microvolt = <1800000>;
370                                 regulator-max-microvolt = <1800000>;
371                         };
372
373                         buck1_reg: BUCK1 {
374                                 regulator-name = "VAP_MIF_1.0V";
375                                 regulator-min-microvolt = <800000>;
376                                 regulator-max-microvolt = <900000>;
377                                 regulator-always-on;
378                         };
379
380                         buck2_reg: BUCK2 {
381                                 regulator-name = "VAP_ARM_1.0V";
382                                 regulator-min-microvolt = <850000>;
383                                 regulator-max-microvolt = <1150000>;
384                                 regulator-always-on;
385                         };
386
387                         buck3_reg: BUCK3 {
388                                 regulator-name = "VAP_INT3D_1.0V";
389                                 regulator-min-microvolt = <850000>;
390                                 regulator-max-microvolt = <1000000>;
391                                 regulator-always-on;
392                         };
393
394                         buck4_reg: BUCK4 {
395                                 regulator-name = "VCC_SUB_1.95V";
396                                 regulator-min-microvolt = <1950000>;
397                                 regulator-max-microvolt = <1950000>;
398                                 regulator-always-on;
399                         };
400
401                         buck5_reg: BUCK5 {
402                                 regulator-name = "VCC_SUB_1.35V";
403                                 regulator-min-microvolt = <1350000>;
404                                 regulator-max-microvolt = <1350000>;
405                                 regulator-always-on;
406                         };
407                 };
408         };
409 };
410
411 &i2c_1 {
412         #address-cells = <1>;
413         #size-cells = <0>;
414         samsung,i2c-sda-delay = <100>;
415         samsung,i2c-slave-addr = <0x10>;
416         samsung,i2c-max-bus-freq = <400000>;
417         status = "okay";
418
419         fuelgauge@36 {
420                 compatible = "maxim,max77836-battery";
421                 interrupt-parent = <&gpx1>;
422                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
423                 reg = <0x36>;
424         };
425 };
426
427 &i2s2 {
428         status = "okay";
429 };
430
431 &mshc_0 {
432         #address-cells = <1>;
433         #size-cells = <0>;
434         broken-cd;
435         non-removable;
436         cap-mmc-highspeed;
437         desc-num = <4>;
438         mmc-hs200-1_8v;
439         card-detect-delay = <200>;
440         vmmc-supply = <&vemmc_reg>;
441         clock-frequency = <100000000>;
442         max-frequency = <100000000>;
443         samsung,dw-mshc-ciu-div = <1>;
444         samsung,dw-mshc-sdr-timing = <0 1>;
445         samsung,dw-mshc-ddr-timing = <1 2>;
446         pinctrl-names = "default";
447         pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
448         bus-width = <8>;
449         status = "okay";
450 };
451
452 &serial_0 {
453         assigned-clocks = <&cmu CLK_SCLK_UART0>;
454         assigned-clock-rates = <100000000>;
455         status = "okay";
456 };
457
458 &serial_1 {
459         status = "okay";
460 };
461
462 &tmu {
463         vtmu-supply = <&ldo7_reg>;
464         status = "okay";
465 };
466
467 &rtc {
468         clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
469         clock-names = "rtc", "rtc_src";
470         status = "okay";
471 };
472
473 &xusbxti {
474         clock-frequency = <24000000>;
475 };
476
477 &pinctrl_0 {
478         pinctrl-names = "default";
479         pinctrl-0 = <&sleep0>;
480
481         sleep0: sleep-state {
482                 PIN_SLP(gpa0-0, INPUT, DOWN);
483                 PIN_SLP(gpa0-1, INPUT, DOWN);
484                 PIN_SLP(gpa0-2, INPUT, DOWN);
485                 PIN_SLP(gpa0-3, INPUT, DOWN);
486                 PIN_SLP(gpa0-4, INPUT, DOWN);
487                 PIN_SLP(gpa0-5, INPUT, DOWN);
488                 PIN_SLP(gpa0-6, INPUT, DOWN);
489                 PIN_SLP(gpa0-7, INPUT, DOWN);
490
491                 PIN_SLP(gpa1-0, INPUT, DOWN);
492                 PIN_SLP(gpa1-1, INPUT, DOWN);
493                 PIN_SLP(gpa1-2, INPUT, DOWN);
494                 PIN_SLP(gpa1-3, INPUT, DOWN);
495                 PIN_SLP(gpa1-4, INPUT, DOWN);
496                 PIN_SLP(gpa1-5, INPUT, DOWN);
497
498                 PIN_SLP(gpb-0, PREV, NONE);
499                 PIN_SLP(gpb-1, PREV, NONE);
500                 PIN_SLP(gpb-2, PREV, NONE);
501                 PIN_SLP(gpb-3, PREV, NONE);
502                 PIN_SLP(gpb-4, INPUT, DOWN);
503                 PIN_SLP(gpb-5, INPUT, DOWN);
504                 PIN_SLP(gpb-6, INPUT, DOWN);
505                 PIN_SLP(gpb-7, INPUT, DOWN);
506
507                 PIN_SLP(gpc0-0, INPUT, DOWN);
508                 PIN_SLP(gpc0-1, INPUT, DOWN);
509                 PIN_SLP(gpc0-2, INPUT, DOWN);
510                 PIN_SLP(gpc0-3, INPUT, DOWN);
511                 PIN_SLP(gpc0-4, INPUT, DOWN);
512
513                 PIN_SLP(gpc1-0, INPUT, DOWN);
514                 PIN_SLP(gpc1-1, INPUT, DOWN);
515                 PIN_SLP(gpc1-2, INPUT, DOWN);
516                 PIN_SLP(gpc1-3, INPUT, DOWN);
517                 PIN_SLP(gpc1-4, INPUT, DOWN);
518
519                 PIN_SLP(gpd0-0, INPUT, DOWN);
520                 PIN_SLP(gpd0-1, INPUT, DOWN);
521                 PIN_SLP(gpd0-2, INPUT, NONE);
522                 PIN_SLP(gpd0-3, INPUT, NONE);
523
524                 PIN_SLP(gpd1-0, INPUT, NONE);
525                 PIN_SLP(gpd1-1, INPUT, NONE);
526                 PIN_SLP(gpd1-2, INPUT, NONE);
527                 PIN_SLP(gpd1-3, INPUT, NONE);
528         };
529 };
530
531 &pinctrl_1 {
532         pinctrl-names = "default";
533         pinctrl-0 = <&initial1 &sleep1>;
534
535         initial1: initial-state {
536                 PIN_IN(gpk2-0, DOWN, LV1);
537                 PIN_IN(gpk2-1, DOWN, LV1);
538                 PIN_IN(gpk2-2, DOWN, LV1);
539                 PIN_IN(gpk2-3, DOWN, LV1);
540                 PIN_IN(gpk2-4, DOWN, LV1);
541                 PIN_IN(gpk2-5, DOWN, LV1);
542                 PIN_IN(gpk2-6, DOWN, LV1);
543         };
544
545         sleep1: sleep-state {
546                 PIN_SLP(gpe0-0, PREV, NONE);
547                 PIN_SLP(gpe0-1, PREV, NONE);
548                 PIN_SLP(gpe0-2, INPUT, DOWN);
549                 PIN_SLP(gpe0-3, INPUT, DOWN);
550                 PIN_SLP(gpe0-4, PREV, NONE);
551                 PIN_SLP(gpe0-5, INPUT, DOWN);
552                 PIN_SLP(gpe0-6, INPUT, DOWN);
553                 PIN_SLP(gpe0-7, INPUT, DOWN);
554
555                 PIN_SLP(gpe1-0, INPUT, DOWN);
556                 PIN_SLP(gpe1-1, PREV, NONE);
557                 PIN_SLP(gpe1-2, INPUT, DOWN);
558                 PIN_SLP(gpe1-3, INPUT, DOWN);
559                 PIN_SLP(gpe1-4, INPUT, DOWN);
560                 PIN_SLP(gpe1-5, INPUT, DOWN);
561                 PIN_SLP(gpe1-6, INPUT, DOWN);
562                 PIN_SLP(gpe1-7, INPUT, NONE);
563
564                 PIN_SLP(gpe2-0, INPUT, NONE);
565                 PIN_SLP(gpe2-1, INPUT, NONE);
566                 PIN_SLP(gpe2-2, INPUT, NONE);
567
568                 PIN_SLP(gpk0-0, INPUT, DOWN);
569                 PIN_SLP(gpk0-1, INPUT, DOWN);
570                 PIN_SLP(gpk0-2, OUT0, NONE);
571                 PIN_SLP(gpk0-3, INPUT, DOWN);
572                 PIN_SLP(gpk0-4, INPUT, DOWN);
573                 PIN_SLP(gpk0-5, INPUT, DOWN);
574                 PIN_SLP(gpk0-6, INPUT, DOWN);
575                 PIN_SLP(gpk0-7, INPUT, DOWN);
576
577                 PIN_SLP(gpk1-0, PREV, NONE);
578                 PIN_SLP(gpk1-1, PREV, NONE);
579                 PIN_SLP(gpk1-2, INPUT, DOWN);
580                 PIN_SLP(gpk1-3, PREV, NONE);
581                 PIN_SLP(gpk1-4, PREV, NONE);
582                 PIN_SLP(gpk1-5, PREV, NONE);
583                 PIN_SLP(gpk1-6, PREV, NONE);
584
585                 PIN_SLP(gpk2-0, INPUT, DOWN);
586                 PIN_SLP(gpk2-1, INPUT, DOWN);
587                 PIN_SLP(gpk2-2, INPUT, DOWN);
588                 PIN_SLP(gpk2-3, INPUT, DOWN);
589                 PIN_SLP(gpk2-4, INPUT, DOWN);
590                 PIN_SLP(gpk2-5, INPUT, DOWN);
591                 PIN_SLP(gpk2-6, INPUT, DOWN);
592
593                 PIN_SLP(gpl0-0, INPUT, DOWN);
594                 PIN_SLP(gpl0-1, INPUT, DOWN);
595                 PIN_SLP(gpl0-2, INPUT, DOWN);
596                 PIN_SLP(gpl0-3, INPUT, DOWN);
597
598                 PIN_SLP(gpm0-0, INPUT, DOWN);
599                 PIN_SLP(gpm0-1, INPUT, DOWN);
600                 PIN_SLP(gpm0-2, INPUT, DOWN);
601                 PIN_SLP(gpm0-3, INPUT, DOWN);
602                 PIN_SLP(gpm0-4, INPUT, DOWN);
603                 PIN_SLP(gpm0-5, INPUT, DOWN);
604                 PIN_SLP(gpm0-6, INPUT, DOWN);
605                 PIN_SLP(gpm0-7, INPUT, DOWN);
606
607                 PIN_SLP(gpm1-0, INPUT, DOWN);
608                 PIN_SLP(gpm1-1, INPUT, DOWN);
609                 PIN_SLP(gpm1-2, INPUT, DOWN);
610                 PIN_SLP(gpm1-3, INPUT, DOWN);
611                 PIN_SLP(gpm1-4, INPUT, DOWN);
612                 PIN_SLP(gpm1-5, INPUT, DOWN);
613                 PIN_SLP(gpm1-6, INPUT, DOWN);
614
615                 PIN_SLP(gpm2-0, INPUT, DOWN);
616                 PIN_SLP(gpm2-1, INPUT, DOWN);
617                 PIN_SLP(gpm2-2, INPUT, DOWN);
618                 PIN_SLP(gpm2-3, INPUT, DOWN);
619                 PIN_SLP(gpm2-4, INPUT, DOWN);
620
621                 PIN_SLP(gpm3-0, INPUT, DOWN);
622                 PIN_SLP(gpm3-1, INPUT, DOWN);
623                 PIN_SLP(gpm3-2, INPUT, DOWN);
624                 PIN_SLP(gpm3-3, INPUT, DOWN);
625                 PIN_SLP(gpm3-4, INPUT, DOWN);
626                 PIN_SLP(gpm3-5, INPUT, DOWN);
627                 PIN_SLP(gpm3-6, INPUT, DOWN);
628                 PIN_SLP(gpm3-7, INPUT, DOWN);
629
630                 PIN_SLP(gpm4-0, INPUT, DOWN);
631                 PIN_SLP(gpm4-1, INPUT, DOWN);
632                 PIN_SLP(gpm4-2, INPUT, DOWN);
633                 PIN_SLP(gpm4-3, INPUT, DOWN);
634                 PIN_SLP(gpm4-4, INPUT, DOWN);
635                 PIN_SLP(gpm4-5, INPUT, DOWN);
636                 PIN_SLP(gpm4-6, INPUT, DOWN);
637                 PIN_SLP(gpm4-7, INPUT, DOWN);
638         };
639 };