src/arm/omap3-gta04.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
   4  *
   5  * Based on omap3-beagle-xm.dts
   6  */
   7 /dts-v1/;
   8
   9 #include "omap36xx.dtsi"
  10 #include <dt-bindings/input/input.h>
  11
  12 / {
  13         model = "OMAP3 GTA04";
  14         compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
  15
  16         cpus {
  17                 cpu@0 {
  18                         cpu0-supply = <&vcc>;
  19                 };
  20         };
  21
  22         memory@80000000 {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x20000000>; /* 512 MB */
  25         };
  26
  27         chosen {
  28                 stdout-path = &uart3;
  29         };
  30
  31         aliases {
  32                 display0 = &lcd;
  33                 display1 = &tv0;
  34                 /delete-property/ mmc2;
  35                 /delete-property/ mmc3;
  36         };
  37
  38         ldo_3v3: fixedregulator {
  39                 compatible = "regulator-fixed";
  40                 regulator-name = "ldo_3v3";
  41                 regulator-min-microvolt = <3300000>;
  42                 regulator-max-microvolt = <3300000>;
  43                 regulator-always-on;
  44         };
  45
  46         /* fixed 26MHz oscillator */
  47         hfclk_26m: oscillator {
  48                 #clock-cells = <0>;
  49                 compatible = "fixed-clock";
  50                 clock-frequency = <26000000>;
  51         };
  52
  53         gpio-keys {
  54                 compatible = "gpio-keys";
  55
  56                 aux-button {
  57                         label = "aux";
  58                         linux,code = <KEY_PHONE>;
  59                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  60                         wakeup-source;
  61                 };
  62         };
  63
  64         antenna-detect {
  65                 compatible = "gpio-keys";
  66
  67                 gps_antenna_button: gps-antenna-button {
  68                         label = "GPS_EXT_ANT";
  69                         linux,input-type = <EV_SW>;
  70                         linux,code = <SW_LINEIN_INSERT>;
  71                         gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
  72                         interrupt-parent = <&gpio5>;
  73                         interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
  74                         debounce-interval = <10>;
  75                         wakeup-source;
  76                 };
  77         };
  78
  79         sound {
  80                 compatible = "ti,omap-twl4030";
  81                 ti,model = "gta04";
  82
  83                 ti,mcbsp = <&mcbsp2>;
  84         };
  85
  86         /* GSM audio */
  87         sound_telephony {
  88                 compatible = "simple-audio-card";
  89                 simple-audio-card,name = "GTA04 voice";
  90                 simple-audio-card,bitclock-master = <&telephony_link_master>;
  91                 simple-audio-card,frame-master = <&telephony_link_master>;
  92                 simple-audio-card,format = "i2s";
  93                 simple-audio-card,bitclock-inversion;
  94                 simple-audio-card,frame-inversion;
  95                 simple-audio-card,cpu {
  96                         sound-dai = <&mcbsp4>;
  97                 };
  98
  99                 telephony_link_master: simple-audio-card,codec {
 100                         sound-dai = <&gtm601_codec>;
 101                 };
 102         };
 103
 104         gtm601_codec: gsm_codec {
 105                 compatible = "option,gtm601";
 106                 #sound-dai-cells = <0>;
 107         };
 108
 109         spi_lcd: spi {
 110                 compatible = "spi-gpio";
 111                 #address-cells = <0x1>;
 112                 #size-cells = <0x0>;
 113                 pinctrl-names = "default";
 114                 pinctrl-0 = <&spi_gpio_pins>;
 115
 116                 sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 117                 miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 118                 mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 119                 cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 120                 num-chipselects = <1>;
 121
 122                 /* lcd panel */
 123                 lcd: td028ttec1@0 {
 124                         compatible = "tpo,td028ttec1";
 125                         reg = <0>;
 126                         spi-max-frequency = <100000>;
 127                         spi-cpol;
 128                         spi-cpha;
 129
 130                         backlight = <&backlight>;
 131                         label = "lcd";
 132                         port {
 133                                 lcd_in: endpoint {
 134                                         remote-endpoint = <&dpi_out>;
 135                                 };
 136                         };
 137                 };
 138         };
 139
 140         backlight: backlight {
 141                 compatible = "pwm-backlight";
 142                 pwms = <&pwm11 0 12000000 0>;
 143                 pwm-names = "backlight";
 144                 brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
 145                 default-brightness-level = <9>; /* => 90 */
 146                 pinctrl-names = "default";
 147                 pinctrl-0 = <&backlight_pins>;
 148         };
 149
 150         pwm11: pwm-11 {
 151                 compatible = "ti,omap-dmtimer-pwm";
 152                 ti,timers = <&timer11>;
 153                 #pwm-cells = <3>;
 154                 ti,clock-source = <0x01>;
 155         };
 156
 157         hsusb2_phy: hsusb2_phy {
 158                 compatible = "usb-nop-xceiv";
 159                 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 160                 #phy-cells = <0>;
 161         };
 162
 163         tv0: connector {
 164                 compatible = "composite-video-connector";
 165                 label = "tv";
 166
 167                 port {
 168                         tv_connector_in: endpoint {
 169                                 remote-endpoint = <&opa_out>;
 170                         };
 171                 };
 172         };
 173
 174         tv_amp: opa362 {
 175                 compatible = "ti,opa362";
 176                 enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;    /* GPIO_23 to enable video out amplifier */
 177
 178                 ports {
 179                         #address-cells = <1>;
 180                         #size-cells = <0>;
 181
 182                         port@0 {
 183                                 reg = <0>;
 184                                 opa_in: endpoint {
 185                                         remote-endpoint = <&venc_out>;
 186                                 };
 187                         };
 188
 189                         port@1 {
 190                                 reg = <1>;
 191                                 opa_out: endpoint {
 192                                         remote-endpoint = <&tv_connector_in>;
 193                                 };
 194                         };
 195                 };
 196         };
 197
 198         wifi_pwrseq: wifi_pwrseq {
 199                 compatible = "mmc-pwrseq-simple";
 200                 reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;     /* W2CBW003 reset through tca6507 */
 201         };
 202
 203         /* devconf0 setup for mcbsp1 clock pins */
 204         pinmux_mcbsp1@48002274 {
 205                 compatible = "pinctrl-single";
 206                 reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
 207                 #address-cells = <1>;
 208                 #size-cells = <0>;
 209                 pinctrl-single,bit-per-mux;
 210                 pinctrl-single,register-width = <32>;
 211                 pinctrl-single,function-mask = <0x7>;   /* MCBSP1 CLK pinmux */
 212                 #pinctrl-cells = <2>;
 213                 pinctrl-names = "default";
 214                 pinctrl-0 = <&mcbsp1_devconf0_pins>;
 215                 mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
 216                         /*                   offset bits mask */
 217                         pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
 218                 };
 219         };
 220
 221         /* devconf1 setup for tvout pins */
 222         pinmux_tv_out@480022d8 {
 223                 compatible = "pinctrl-single";
 224                 reg = <0x480022d8 4>;   /* CONTROL_DEVCONF1 */
 225                 #address-cells = <1>;
 226                 #size-cells = <0>;
 227                 pinctrl-single,bit-per-mux;
 228                 pinctrl-single,register-width = <32>;
 229                 pinctrl-single,function-mask = <0x81>;  /* TV out pin control */
 230                 #pinctrl-cells = <2>;
 231                 pinctrl-names = "default";
 232                 pinctrl-0 = <&tv_acbias_devconf1_pins>;
 233                 tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
 234                         /*                      offset  bits    mask */
 235                         pinctrl-single,bits = <0x00 0x40800 0x40800>;   /* set TVOUTBYPASS and TVOUTACEN */
 236                 };
 237         };
 238 };
 239
 240 &omap3_pmx_wkup {
 241         gpio1_pins: pinmux_gpio1_pins {
 242                 pinctrl-single,pins = <
 243                         OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
 244                         OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
 245                 >;
 246         };
 247 };
 248
 249 &omap3_pmx_core {
 250         pinctrl-names = "default";
 251         pinctrl-0 = <
 252                         &hsusb2_pins
 253         >;
 254
 255         hsusb2_pins: pinmux_hsusb2_pins {
 256                 pinctrl-single,pins = <
 257                         OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
 258                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
 259                         OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
 260                         OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
 261                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
 262                         OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
 263                 >;
 264         };
 265
 266         uart1_pins: pinmux_uart1_pins {
 267                 pinctrl-single,pins = <
 268                         OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)                /* uart1_rx.uart1_rx */
 269                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)               /* uart1_tx.uart1_tx */
 270                 >;
 271         };
 272
 273         uart2_pins: pinmux_uart2_pins {
 274                 pinctrl-single,pins = <
 275                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx.uart2_rx */
 276                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx.uart2_tx */
 277                 >;
 278         };
 279
 280         uart3_pins: pinmux_uart3_pins {
 281                 pinctrl-single,pins = <
 282                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)                /* uart3_rx.uart3_rx */
 283                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx.uart3_tx */
 284                 >;
 285         };
 286
 287         mmc1_pins: pinmux_mmc1_pins {
 288                 pinctrl-single,pins = <
 289                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_clk.sdmmc1_clk */
 290                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_cmd.sdmmc1_cmd */
 291                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0.sdmmc1_dat0 */
 292                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat1.sdmmc1_dat1 */
 293                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat2.sdmmc1_dat2 */
 294                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat3.sdmmc1_dat3 */
 295                 >;
 296         };
 297
 298         backlight_pins: backlight_pins_pinmux {
 299                 pinctrl-single,pins = <
 300                         OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)            /* gpt11/gpio57 */
 301                 >;
 302         };
 303
 304         dss_dpi_pins: pinmux_dss_dpi_pins {
 305                 pinctrl-single,pins = <
 306                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 307                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
 308                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
 309                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
 310                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
 311                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
 312                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
 313                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
 314                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
 315                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
 316                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
 317                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
 318                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
 319                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
 320                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
 321                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
 322                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
 323                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
 324                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
 325                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
 326                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
 327                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
 328                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
 329                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
 330                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
 331                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
 332                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 333                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 334                 >;
 335         };
 336
 337         gps_pins: pinmux_gps_pins {
 338                 pinctrl-single,pins = <
 339                         OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
 340                 >;
 341         };
 342
 343         hdq_pins: hdq_pins {
 344                 pinctrl-single,pins = <
 345                         OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
 346                 >;
 347         };
 348
 349         bmp085_pins: pinmux_bmp085_pins {
 350                 pinctrl-single,pins = <
 351                         OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
 352                 >;
 353         };
 354
 355         bma180_pins: pinmux_bma180_pins {
 356                 pinctrl-single,pins = <
 357                         OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
 358                 >;
 359         };
 360
 361         itg3200_pins: pinmux_itg3200_pins {
 362                 pinctrl-single,pins = <
 363                         OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
 364                 >;
 365         };
 366
 367         hmc5843_pins: pinmux_hmc5843_pins {
 368                 pinctrl-single,pins = <
 369                         OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 370                 >;
 371         };
 372
 373         penirq_pins: pinmux_penirq_pins {
 374                 pinctrl-single,pins = <
 375                         /* here we could enable to wakeup the cpu from suspend by a pen touch */
 376                         OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
 377                 >;
 378         };
 379
 380         camera_pins: pinmux_camera_pins {
 381                 pinctrl-single,pins = <
 382                         /* set up parallel camera interface */
 383                         OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
 384                         OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
 385                         OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
 386                         OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
 387                         OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
 388                         OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
 389                         OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
 390                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
 391                         OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
 392                         OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
 393                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
 394                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
 395                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
 396                         OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
 397                         OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
 398                         OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
 399                         OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
 400                         OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
 401                         OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
 402                         OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
 403                 >;
 404         };
 405
 406         mcbsp1_pins: pinmux_mcbsp1_pins {
 407                 pinctrl-single,pins = <
 408                         OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)        /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
 409                         OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)       /* mcbsp1_clkr.mcbsp1_fsr */
 410                         OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)       /* mcbsp1_dx.mcbsp1_dx */
 411                         OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)        /* mcbsp1_dx.mcbsp1_dr */
 412                         /* mcbsp_clks is used as PENIRQ */
 413                         /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)        mcbsp_clks.mcbsp_clks */
 414                         OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)        /* mcbsp_clks.mcbsp1_fsx */
 415                         OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)        /* mcbsp1_clkx.mcbsp1_clkx */
 416                 >;
 417         };
 418
 419         mcbsp2_pins: pinmux_mcbsp2_pins {
 420                 pinctrl-single,pins = <
 421                         OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx.mcbsp2_fsx */
 422                         OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx.mcbsp2_clkx */
 423                         OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr.mcbsp2_dr */
 424                         OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dr.mcbsp2_dx */
 425                 >;
 426         };
 427
 428         mcbsp3_pins: pinmux_mcbsp3_pins {
 429                 pinctrl-single,pins = <
 430                         OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)       /* mcbsp3_dx.mcbsp3_dx */
 431                         OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)        /* mcbsp3_dx.mcbsp3_dr */
 432                         OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)        /* mcbsp3_clkx.mcbsp3_clkx */
 433                         OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)        /* mcbsp3_clkx.mcbsp3_fsx */
 434                 >;
 435         };
 436
 437         mcbsp4_pins: pinmux_mcbsp4_pins {
 438                 pinctrl-single,pins = <
 439                         OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcbsp4_clkx.mcbsp4_clkx */
 440                         OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcbsp4_clkx.mcbsp4_dr */
 441                         OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcbsp4_dx.mcbsp4_fsx */
 442                 >;
 443         };
 444 };
 445
 446 &omap3_pmx_core2 {
 447         pinctrl-names = "default";
 448         pinctrl-0 = <
 449                         &hsusb2_2_pins
 450         >;
 451
 452         hsusb2_2_pins: pinmux_hsusb2_2_pins {
 453                 pinctrl-single,pins = <
 454                         OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
 455                         OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
 456                         OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
 457                         OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
 458                         OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
 459                         OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
 460                 >;
 461         };
 462
 463         spi_gpio_pins: spi_gpio_pinmux {
 464                 pinctrl-single,pins = <
 465                         OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
 466                         OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
 467                         OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
 468                         OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
 469                 >;
 470         };
 471 };
 472
 473 &i2c1 {
 474         clock-frequency = <2600000>;
 475
 476         twl: twl@48 {
 477                 reg = <0x48>;
 478                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 479                 interrupt-parent = <&intc>;
 480
 481                 clocks = <&hfclk_26m>;
 482                 clock-names = "fck";
 483
 484                 twl_audio: audio {
 485                         compatible = "ti,twl4030-audio";
 486                         ti,enable-vibra = <1>;
 487                         codec {
 488                                 ti,ramp_delay_value = <3>;
 489                         };
 490                 };
 491
 492                 twl_power: power {
 493                         compatible = "ti,twl4030-power-idle";
 494                         ti,system-power-controller;
 495                 };
 496         };
 497 };
 498
 499 #include "twl4030.dtsi"
 500 #include "twl4030_omap3.dtsi"
 501
 502 &i2c2 {
 503         clock-frequency = <400000>;
 504
 505         /* pressure sensor */
 506         bmp085@77 {
 507                 compatible = "bosch,bmp085";
 508                 reg = <0x77>;
 509                 pinctrl-names = "default";
 510                 pinctrl-0 = <&bmp085_pins>;
 511                 interrupt-parent = <&gpio4>;
 512                 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 513                 vdda-supply = <&vio>;
 514                 vddd-supply = <&vio>;
 515         };
 516
 517         /* accelerometer */
 518         bma180@41 {
 519                 compatible = "bosch,bma180";
 520                 reg = <0x41>;
 521                 pinctrl-names = "default";
 522                 pinctrl-0 = <&bma180_pins>;
 523                 interrupt-parent = <&gpio4>;
 524                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 525         };
 526
 527         /* gyroscope */
 528         itg3200@68 {
 529                 compatible = "invensense,itg3200";
 530                 reg = <0x68>;
 531                 pinctrl-names = "default";
 532                 pinctrl-0 = <&itg3200_pins>;
 533                 interrupt-parent = <&gpio2>;
 534                 interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
 535         };
 536
 537         /* leds + gpios */
 538         tca6507: tca6507@45 {
 539                 compatible = "ti,tca6507";
 540                 #address-cells = <1>;
 541                 #size-cells = <0>;
 542                 reg = <0x45>;
 543
 544                 gpio-controller;
 545                 #gpio-cells = <2>;
 546
 547                 gta04_led0: led@0 {
 548                         label = "gta04:red:aux";
 549                         reg = <0x0>;
 550                 };
 551
 552                 gta04_led1: led@1 {
 553                         label = "gta04:green:aux";
 554                         reg = <0x1>;
 555                 };
 556
 557                 gta04_led3: led@3 {
 558                         label = "gta04:red:power";
 559                         reg = <0x3>;
 560                         linux,default-trigger = "default-on";
 561                 };
 562
 563                 gta04_led4: led@4 {
 564                         label = "gta04:green:power";
 565                         reg = <0x4>;
 566                 };
 567
 568                 wifi_reset: led@6 {
 569                         /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
 570                         reg = <0x6>;
 571                         compatible = "gpio";
 572                 };
 573         };
 574
 575         /* compass aka magnetometer */
 576         hmc5843@1e {
 577                 compatible = "honeywell,hmc5883l";
 578                 reg = <0x1e>;
 579                 pinctrl-names = "default";
 580                 pinctrl-0 = <&hmc5843_pins>;
 581                 interrupt-parent = <&gpio4>;
 582                 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;        /* gpio112 */
 583         };
 584
 585         /* touchscreen */
 586         tsc2007@48 {
 587                 compatible = "ti,tsc2007";
 588                 reg = <0x48>;
 589                 pinctrl-names = "default";
 590                 pinctrl-0 = <&penirq_pins>;
 591                 interrupt-parent = <&gpio6>;
 592                 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 593                 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;     /* GPIO_160 */
 594                 ti,x-plate-ohms = <600>;
 595                 touchscreen-size-x = <480>;
 596                 touchscreen-size-y = <640>;
 597                 touchscreen-max-pressure = <1000>;
 598                 touchscreen-fuzz-x = <3>;
 599                 touchscreen-fuzz-y = <8>;
 600                 touchscreen-fuzz-pressure = <10>;
 601                 touchscreen-inverted-y;
 602         };
 603
 604         /* RFID EEPROM */
 605         m24lr64@50 {
 606                 compatible = "atmel,24c64";
 607                 reg = <0x50>;
 608         };
 609 };
 610
 611 &i2c3 {
 612         clock-frequency = <100000>;
 613 };
 614
 615 &usb_otg_hs {
 616         interface-type = <0>;
 617         usb-phy = <&usb2_phy>;
 618         phys = <&usb2_phy>;
 619         phy-names = "usb2-phy";
 620         mode = <3>;
 621         power = <50>;
 622 };
 623
 624 &usbhshost {
 625         port2-mode = "ehci-phy";
 626 };
 627
 628 &usbhsehci {
 629         phys = <0 &hsusb2_phy>;
 630 };
 631
 632 &mmc1 {
 633         pinctrl-names = "default";
 634         pinctrl-0 = <&mmc1_pins>;
 635         vmmc-supply = <&vmmc1>;
 636         bus-width = <4>;
 637         ti,non-removable;
 638         broken-cd;      /* hardware has no CD */
 639 };
 640
 641 &mmc2 {
 642         vmmc-supply = <&vaux4>;
 643         bus-width = <4>;
 644         ti,non-removable;
 645         cap-power-off-card;
 646         mmc-pwrseq = <&wifi_pwrseq>;
 647 };
 648
 649 &mmc3 {
 650         status = "disabled";
 651 };
 652
 653 #define BIT(x) (1 << (x))
 654 &twl_gpio {
 655         /* pullups: BIT(2) */
 656         ti,pullups = <BIT(2)>;
 657         /*
 658          * pulldowns:
 659          * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
 660          * BIT(15), BIT(16), BIT(17)
 661          */
 662         ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
 663                          BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
 664 };
 665
 666 &twl_keypad {
 667         status = "disabled";
 668 };
 669
 670 &gpio1 {
 671         pinctrl-names = "default";
 672         pinctrl-0 = <&gpio1_pins>;
 673 };
 674
 675 &uart1 {
 676         pinctrl-names = "default";
 677         pinctrl-0 = <&uart1_pins>;
 678 };
 679
 680 &uart2 {
 681         pinctrl-names = "default";
 682         pinctrl-0 = <&uart2_pins>;
 683         gnss: gnss {
 684                 compatible = "wi2wi,w2sg0004";
 685                 pinctrl-names = "default";
 686                 pinctrl-0 = <&gps_pins>;
 687                 sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 688                 lna-supply = <&vsim>;
 689                 vcc-supply = <&ldo_3v3>;
 690         };
 691 };
 692
 693 &uart3 {
 694         pinctrl-names = "default";
 695         pinctrl-0 = <&uart3_pins>;
 696         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 697 };
 698
 699 &charger {
 700         ti,bb-uvolt = <3200000>;
 701         ti,bb-uamp = <150>;
 702 };
 703
 704 /* spare */
 705 &vaux1 {
 706         regulator-min-microvolt = <2500000>;
 707         regulator-max-microvolt = <3000000>;
 708 };
 709
 710 /* sensors */
 711 &vaux2 {
 712         regulator-min-microvolt = <2800000>;
 713         regulator-max-microvolt = <2800000>;
 714         regulator-always-on;    /* we should never switch off while vio is on! */
 715 };
 716
 717 /* camera */
 718 &vaux3 {
 719         regulator-min-microvolt = <2500000>;
 720         regulator-max-microvolt = <2500000>;
 721 };
 722
 723 /* WLAN/BT */
 724 &vaux4 {
 725         regulator-min-microvolt = <2800000>;
 726         regulator-max-microvolt = <3150000>;
 727 };
 728
 729 /* GPS LNA */
 730 &vsim {
 731         regulator-min-microvolt = <2800000>;
 732         regulator-max-microvolt = <3150000>;
 733 };
 734
 735 /* Needed to power the DPI pins */
 736
 737 &vpll2 {
 738         regulator-always-on;
 739 };
 740
 741 &dss {
 742         pinctrl-names = "default";
 743         pinctrl-0 = < &dss_dpi_pins >;
 744
 745         status = "okay";
 746         vdds_dsi-supply = <&vpll2>;
 747
 748         port {
 749                 dpi_out: endpoint {
 750                         remote-endpoint = <&lcd_in>;
 751                         data-lines = <24>;
 752                 };
 753         };
 754 };
 755
 756 &venc {
 757         status = "okay";
 758
 759         vdda-supply = <&vdac>;
 760
 761         port {
 762                 venc_out: endpoint {
 763                         remote-endpoint = <&opa_in>;
 764                         ti,channels = <1>;
 765                         ti,invert-polarity;
 766                 };
 767         };
 768 };
 769
 770 &gpmc {
 771         ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 772
 773         nand@0,0 {
 774                 compatible = "ti,omap2-nand";
 775                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 776                 interrupt-parent = <&gpmc>;
 777                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 778                              <1 IRQ_TYPE_NONE>; /* termcount */
 779                 ti,nand-ecc-opt = "ham1";
 780                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 781                 nand-bus-width = <16>;
 782                 #address-cells = <1>;
 783                 #size-cells = <1>;
 784
 785                 gpmc,device-width = <2>;
 786                 gpmc,cs-on-ns = <0>;
 787                 gpmc,cs-rd-off-ns = <44>;
 788                 gpmc,cs-wr-off-ns = <44>;
 789                 gpmc,adv-on-ns = <6>;
 790                 gpmc,adv-rd-off-ns = <34>;
 791                 gpmc,adv-wr-off-ns = <44>;
 792                 gpmc,oe-off-ns = <54>;
 793                 gpmc,we-off-ns = <40>;
 794                 gpmc,access-ns = <64>;
 795                 gpmc,rd-cycle-ns = <82>;
 796                 gpmc,wr-cycle-ns = <82>;
 797                 gpmc,wr-access-ns = <40>;
 798                 gpmc,wr-data-mux-bus-ns = <0>;
 799                 gpmc,sync-clk-ps = <0>;
 800
 801                 x-loader@0 {
 802                         label = "X-Loader";
 803                         reg = <0 0x80000>;
 804                 };
 805
 806                 bootloaders@80000 {
 807                         label = "U-Boot";
 808                         reg = <0x80000 0x1c0000>;
 809                 };
 810
 811                 bootloaders_env@240000 {
 812                         label = "U-Boot Env";
 813                         reg = <0x240000 0x40000>;
 814                 };
 815
 816                 kernel@280000 {
 817                         label = "Kernel";
 818                         reg = <0x280000 0x600000>;
 819                 };
 820
 821                 filesystem@880000 {
 822                         label = "File System";
 823                         reg = <0x880000 0>;     /* 0 = MTDPART_SIZ_FULL */
 824                 };
 825         };
 826 };
 827
 828 &mcbsp1 { /* FM Transceiver PCM */
 829         status = "okay";
 830         #sound-dai-cells = <0>;
 831         pinctrl-names = "default";
 832         pinctrl-0 = <&mcbsp1_pins>;
 833 };
 834
 835 &mcbsp2 { /* TPS65950 I2S */
 836         status = "okay";
 837         pinctrl-names = "default";
 838         pinctrl-0 = <&mcbsp2_pins>;
 839 };
 840
 841 &mcbsp3 { /* Bluetooth PCM */
 842         status = "okay";
 843         #sound-dai-cells = <0>;
 844         pinctrl-names = "default";
 845         pinctrl-0 = <&mcbsp3_pins>;
 846 };
 847
 848 &mcbsp4 { /* GSM voice PCM */
 849         status = "okay";
 850         #sound-dai-cells = <0>;
 851         pinctrl-names = "default";
 852         pinctrl-0 = <&mcbsp4_pins>;
 853 };
 854
 855 &hdqw1w {
 856         pinctrl-names = "default";
 857         pinctrl-0 = <&hdq_pins>;
 858 };
 859
 860 /* image signal processor within OMAP3 SoC */
 861 &isp {
 862         ports {
 863                 port@0 {
 864                         reg = <0>;
 865                         parallel_ep: endpoint {
 866                                 ti,isp-clock-divisor = <1>;
 867                                 ti,strobe-mode;
 868                                 bus-width = <8>;/* Used data lines */
 869                                 data-shift = <2>; /* Lines 9:2 are used */
 870                                 hsync-active = <0>; /* Active low */
 871                                 vsync-active = <1>; /* Active high */
 872                                 data-active = <1>;/* Active high */
 873                                 pclk-sample = <1>;/* Falling */
 874                         };
 875                 };
 876                 /* port@1 and port@2 are not used by GTA04 */
 877         };
 878 };