src/arm/omap34xx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Device Tree Source for OMAP34xx/OMAP35xx SoC
   4  *
   5  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
   6  */
   7
   8 #include <dt-bindings/bus/ti-sysc.h>
   9 #include <dt-bindings/media/omap3-isp.h>
  10
  11 #include "omap3.dtsi"
  12
  13 / {
  14         cpus {
  15                 cpu: cpu@0 {
  16                         /* OMAP343x/OMAP35xx variants OPP1-6 */
  17                         operating-points-v2 = <&cpu0_opp_table>;
  18
  19                         clock-latency = <300000>; /* From legacy driver */
  20                         #cooling-cells = <2>;
  21                 };
  22         };
  23
  24         cpu0_opp_table: opp-table {
  25                 compatible = "operating-points-v2-ti-cpu";
  26                 syscon = <&scm_conf>;
  27
  28                 opp1-125000000 {
  29                         opp-hz = /bits/ 64 <125000000>;
  30                         /*
  31                          * we currently only select the max voltage from table
  32                          * Table 3-3 of the omap3530 Data sheet (SPRS507F).
  33                          * Format is: <target min max>
  34                          */
  35                         opp-microvolt = <975000 975000 975000>;
  36                         /*
  37                          * first value is silicon revision bit mask
  38                          * second one 720MHz Device Identification bit mask
  39                          */
  40                         opp-supported-hw = <0xffffffff 3>;
  41                 };
  42
  43                 opp2-250000000 {
  44                         opp-hz = /bits/ 64 <250000000>;
  45                         opp-microvolt = <1075000 1075000 1075000>;
  46                         opp-supported-hw = <0xffffffff 3>;
  47                         opp-suspend;
  48                 };
  49
  50                 opp3-500000000 {
  51                         opp-hz = /bits/ 64 <500000000>;
  52                         opp-microvolt = <1200000 1200000 1200000>;
  53                         opp-supported-hw = <0xffffffff 3>;
  54                 };
  55
  56                 opp4-550000000 {
  57                         opp-hz = /bits/ 64 <550000000>;
  58                         opp-microvolt = <1275000 1275000 1275000>;
  59                         opp-supported-hw = <0xffffffff 3>;
  60                 };
  61
  62                 opp5-600000000 {
  63                         opp-hz = /bits/ 64 <600000000>;
  64                         opp-microvolt = <1350000 1350000 1350000>;
  65                         opp-supported-hw = <0xffffffff 3>;
  66                 };
  67
  68                 opp6-720000000 {
  69                         opp-hz = /bits/ 64 <720000000>;
  70                         opp-microvolt = <1350000 1350000 1350000>;
  71                         /* only high-speed grade omap3530 devices */
  72                         opp-supported-hw = <0xffffffff 2>;
  73                         turbo-mode;
  74                 };
  75         };
  76
  77         ocp@68000000 {
  78                 omap3_pmx_core2: pinmux@480025d8 {
  79                         compatible = "ti,omap3-padconf", "pinctrl-single";
  80                         reg = <0x480025d8 0x24>;
  81                         #address-cells = <1>;
  82                         #size-cells = <0>;
  83                         #pinctrl-cells = <1>;
  84                         #interrupt-cells = <1>;
  85                         interrupt-controller;
  86                         pinctrl-single,register-width = <16>;
  87                         pinctrl-single,function-mask = <0xff1f>;
  88                 };
  89
  90                 isp: isp@480bc000 {
  91                         compatible = "ti,omap3-isp";
  92                         reg = <0x480bc000 0x12fc
  93                                0x480bd800 0x017c>;
  94                         interrupts = <24>;
  95                         iommus = <&mmu_isp>;
  96                         syscon = <&scm_conf 0x6c>;
  97                         ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
  98                         #clock-cells = <1>;
  99                         ports {
 100                                 #address-cells = <1>;
 101                                 #size-cells = <0>;
 102                         };
 103                 };
 104
 105                 bandgap: bandgap@48002524 {
 106                         reg = <0x48002524 0x4>;
 107                         compatible = "ti,omap34xx-bandgap";
 108                         #thermal-sensor-cells = <0>;
 109                 };
 110
 111                 target-module@480cb000 {
 112                         compatible = "ti,sysc-omap3430-sr", "ti,sysc";
 113                         ti,hwmods = "smartreflex_core";
 114                         reg = <0x480cb024 0x4>;
 115                         reg-names = "sysc";
 116                         ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
 117                         clocks = <&sr2_fck>;
 118                         clock-names = "fck";
 119                         #address-cells = <1>;
 120                         #size-cells = <1>;
 121                         ranges = <0 0x480cb000 0x001000>;
 122
 123                         smartreflex_core: smartreflex@0 {
 124                                 compatible = "ti,omap3-smartreflex-core";
 125                                 reg = <0 0x400>;
 126                                 interrupts = <19>;
 127                         };
 128                 };
 129
 130                 target-module@480c9000 {
 131                         compatible = "ti,sysc-omap3430-sr", "ti,sysc";
 132                         ti,hwmods = "smartreflex_mpu_iva";
 133                         reg = <0x480c9024 0x4>;
 134                         reg-names = "sysc";
 135                         ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
 136                         clocks = <&sr1_fck>;
 137                         clock-names = "fck";
 138                         #address-cells = <1>;
 139                         #size-cells = <1>;
 140                         ranges = <0 0x480c9000 0x001000>;
 141
 142                         smartreflex_mpu_iva: smartreflex@480c9000 {
 143                                 compatible = "ti,omap3-smartreflex-mpu-iva";
 144                                 reg = <0 0x400>;
 145                                 interrupts = <18>;
 146                         };
 147                 };
 148
 149                 /*
 150                  * On omap34xx the OCP registers do not seem to be accessible
 151                  * at all unlike on 36xx. Maybe SGX is permanently set to
 152                  * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
 153                  * write-only at 0x50000e10. We detect SGX based on the SGX
 154                  * revision register instead of the unreadable OCP revision
 155                  * register. Also note that on early 34xx es1 revision there
 156                  * are also different clocks, but we do not have any dts users
 157                  * for it.
 158                  */
 159                 sgx_module: target-module@50000000 {
 160                         compatible = "ti,sysc-omap2", "ti,sysc";
 161                         reg = <0x50000014 0x4>;
 162                         reg-names = "rev";
 163                         clocks = <&sgx_fck>, <&sgx_ick>;
 164                         clock-names = "fck", "ick";
 165                         #address-cells = <1>;
 166                         #size-cells = <1>;
 167                         ranges = <0 0x50000000 0x4000>;
 168
 169                         /*
 170                          * Closed source PowerVR driver, no child device
 171                          * binding or driver in mainline
 172                          */
 173                 };
 174         };
 175
 176         thermal_zones: thermal-zones {
 177                 #include "omap3-cpu-thermal.dtsi"
 178         };
 179 };
 180
 181 &ssi {
 182         status = "okay";
 183
 184         clocks = <&ssi_ssr_fck>,
 185                  <&ssi_sst_fck>,
 186                  <&ssi_ick>;
 187         clock-names = "ssi_ssr_fck",
 188                       "ssi_sst_fck",
 189                       "ssi_ick";
 190 };
 191
 192 &usb_otg_target {
 193         clocks = <&hsotgusb_ick_3430es2>;
 194 };
 195
 196 /include/ "omap34xx-omap36xx-clocks.dtsi"
 197 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 198 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"