src/arm/rk3288-veyron-jaq.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google Veyron Jaq Rev 1+ board device tree source
   4  *
   5  * Copyright 2015 Google, Inc
   6  */
   7
   8 /dts-v1/;
   9
  10 #include "rk3288-veyron-chromebook.dtsi"
  11 #include "cros-ec-sbs.dtsi"
  12
  13 / {
  14         model = "Google Jaq";
  15         compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
  16                      "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
  17                      "google,veyron-jaq-rev1", "google,veyron-jaq",
  18                      "google,veyron", "rockchip,rk3288";
  19 };
  20
  21 &backlight {
  22         /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
  23         brightness-levels = <0 8 255>;
  24         num-interpolated-steps = <247>;
  25 };
  26
  27 &rk808 {
  28         pinctrl-names = "default";
  29         pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
  30         dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
  31                     <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
  32
  33         regulators {
  34                 mic_vcc: LDO_REG2 {
  35                         regulator-name = "mic_vcc";
  36                         regulator-always-on;
  37                         regulator-boot-on;
  38                         regulator-min-microvolt = <1800000>;
  39                         regulator-max-microvolt = <1800000>;
  40                         regulator-state-mem {
  41                                 regulator-off-in-suspend;
  42                         };
  43                 };
  44         };
  45 };
  46
  47 &sdmmc {
  48         disable-wp;
  49         pinctrl-names = "default";
  50         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
  51                         &sdmmc_bus4>;
  52 };
  53
  54 &vcc_5v {
  55         enable-active-high;
  56         gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
  57         pinctrl-names = "default";
  58         pinctrl-0 = <&drv_5v>;
  59 };
  60
  61 &vcc50_hdmi {
  62         enable-active-high;
  63         gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
  64         pinctrl-names = "default";
  65         pinctrl-0 = <&vcc50_hdmi_en>;
  66 };
  67
  68 &gpio0 {
  69         gpio-line-names = "PMIC_SLEEP_AP",
  70                           "DDRIO_PWROFF",
  71                           "DDRIO_RETEN",
  72                           "TS3A227E_INT_L",
  73                           "PMIC_INT_L",
  74                           "PWR_KEY_L",
  75                           "AP_LID_INT_L",
  76                           "EC_IN_RW",
  77
  78                           "AC_PRESENT_AP",
  79                           /*
  80                            * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
  81                            * it REC_MODE_L.
  82                            */
  83                           "RECOVERY_SW_L",
  84                           "OTP_OUT",
  85                           "HOST1_PWR_EN",
  86                           "USBOTG_PWREN_H",
  87                           "AP_WARM_RESET_H",
  88                           "nFALUT2",
  89                           "I2C0_SDA_PMIC",
  90
  91                           "I2C0_SCL_PMIC",
  92                           "SUSPEND_L",
  93                           "USB_INT";
  94 };
  95
  96 &gpio2 {
  97         gpio-line-names = "CONFIG0",
  98                           "CONFIG1",
  99                           "CONFIG2",
 100                           "",
 101                           "",
 102                           "",
 103                           "",
 104                           "CONFIG3",
 105
 106                           "",
 107                           "EMMC_RST_L",
 108                           "",
 109                           "",
 110                           "BL_PWR_EN",
 111                           "AVDD_1V8_DISP_EN";
 112 };
 113
 114 &gpio3 {
 115         gpio-line-names = "FLASH0_D0",
 116                           "FLASH0_D1",
 117                           "FLASH0_D2",
 118                           "FLASH0_D3",
 119                           "FLASH0_D4",
 120                           "FLASH0_D5",
 121                           "FLASH0_D6",
 122                           "FLASH0_D7",
 123
 124                           "",
 125                           "",
 126                           "",
 127                           "",
 128                           "",
 129                           "",
 130                           "",
 131                           "",
 132
 133                           "FLASH0_CS2/EMMC_CMD",
 134                           "",
 135                           "FLASH0_DQS/EMMC_CLKO";
 136 };
 137
 138 &gpio4 {
 139         gpio-line-names = "",
 140                           "",
 141                           "",
 142                           "",
 143                           "",
 144                           "",
 145                           "",
 146                           "",
 147
 148                           "",
 149                           "",
 150                           "",
 151                           "",
 152                           "",
 153                           "",
 154                           "",
 155                           "",
 156
 157                           "UART0_RXD",
 158                           "UART0_TXD",
 159                           "UART0_CTS",
 160                           "UART0_RTS",
 161                           "SDIO0_D0",
 162                           "SDIO0_D1",
 163                           "SDIO0_D2",
 164                           "SDIO0_D3",
 165
 166                           "SDIO0_CMD",
 167                           "SDIO0_CLK",
 168                           "BT_DEV_WAKE",        /* Maybe missing from mighty? */
 169                           "",
 170                           "WIFI_ENABLE_H",
 171                           "BT_ENABLE_L",
 172                           "WIFI_HOST_WAKE",
 173                           "BT_HOST_WAKE";
 174 };
 175
 176 &gpio5 {
 177         gpio-line-names = "",
 178                           "",
 179                           "",
 180                           "",
 181                           "",
 182                           "",
 183                           "",
 184                           "",
 185
 186                           "",
 187                           "",
 188                           "",
 189                           "",
 190                           "SPI0_CLK",
 191                           "SPI0_CS0",
 192                           "SPI0_TXD",
 193                           "SPI0_RXD",
 194
 195                           "",
 196                           "",
 197                           "",
 198                           "VCC50_HDMI_EN";
 199 };
 200
 201 &gpio6 {
 202         gpio-line-names = "I2S0_SCLK",
 203                           "I2S0_LRCK_RX",
 204                           "I2S0_LRCK_TX",
 205                           "I2S0_SDI",
 206                           "I2S0_SDO0",
 207                           "HP_DET_H",
 208                           "ALS_INT",
 209                           "INT_CODEC",
 210
 211                           "I2S0_CLK",
 212                           "I2C2_SDA",
 213                           "I2C2_SCL",
 214                           "MICDET",
 215                           "",
 216                           "",
 217                           "",
 218                           "",
 219
 220                           "SDMMC_D0",
 221                           "SDMMC_D1",
 222                           "SDMMC_D2",
 223                           "SDMMC_D3",
 224                           "SDMMC_CLK",
 225                           "SDMMC_CMD";
 226 };
 227
 228 &gpio7 {
 229         gpio-line-names = "LCDC_BL",
 230                           "PWM_LOG",
 231                           "BL_EN",
 232                           "TRACKPAD_INT",
 233                           "TPM_INT_H",
 234                           "SDMMC_DET_L",
 235                           /*
 236                            * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
 237                            * it FW_WP_AP.
 238                            */
 239                           "AP_FLASH_WP_L",
 240                           "EC_INT",
 241
 242                           "CPU_NMI",
 243                           "DVSOK",
 244                           "SDMMC_WP",           /* mighty only */
 245                           "EDP_HPD",
 246                           "DVS1",
 247                           "nFALUT1",            /* nFAULT1 on jaq */
 248                           "LCD_EN",
 249                           "DVS2",
 250
 251                           "VCC5V_GOOD_H",
 252                           "I2C4_SDA_TP",
 253                           "I2C4_SCL_TP",
 254                           "I2C5_SDA_HDMI",
 255                           "I2C5_SCL_HDMI",
 256                           "5V_DRV",
 257                           "UART2_RXD",
 258                           "UART2_TXD";
 259 };
 260
 261 &gpio8 {
 262         gpio-line-names = "RAM_ID0",
 263                           "RAM_ID1",
 264                           "RAM_ID2",
 265                           "RAM_ID3",
 266                           "I2C1_SDA_TPM",
 267                           "I2C1_SCL_TPM",
 268                           "SPI2_CLK",
 269                           "SPI2_CS0",
 270
 271                           "SPI2_RXD",
 272                           "SPI2_TXD";
 273 };
 274
 275 &pinctrl {
 276         buck-5v {
 277                 drv_5v: drv-5v {
 278                         rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 279                 };
 280         };
 281
 282         hdmi {
 283                 vcc50_hdmi_en: vcc50-hdmi-en {
 284                         rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
 285                 };
 286         };
 287
 288         pmic {
 289                 dvs_1: dvs-1 {
 290                         rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
 291                 };
 292
 293                 dvs_2: dvs-2 {
 294                         rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
 295                 };
 296         };
 297 };