src/arm64/allwinner/sun50i-h6-beelink-gs1.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
   3
   4 /dts-v1/;
   5
   6 #include "sun50i-h6.dtsi"
   7 #include "sun50i-h6-cpu-opp.dtsi"
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10
  11 / {
  12         model = "Beelink GS1";
  13         compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
  14
  15         aliases {
  16                 ethernet0 = &emac;
  17                 serial0 = &uart0;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23
  24         connector {
  25                 compatible = "hdmi-connector";
  26                 type = "a";
  27                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
  28
  29                 port {
  30                         hdmi_con_in: endpoint {
  31                                 remote-endpoint = <&hdmi_out_con>;
  32                         };
  33                 };
  34         };
  35
  36         ext_osc32k: ext_osc32k_clk {
  37                 #clock-cells = <0>;
  38                 compatible = "fixed-clock";
  39                 clock-frequency = <32768>;
  40                 clock-output-names = "ext_osc32k";
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 power {
  47                         label = "beelink:white:power";
  48                         gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
  49                         default-state = "on";
  50                 };
  51         };
  52
  53         reg_vcc5v: vcc5v {
  54                 /* board wide 5V supply directly from the DC jack */
  55                 compatible = "regulator-fixed";
  56                 regulator-name = "vcc-5v";
  57                 regulator-min-microvolt = <5000000>;
  58                 regulator-max-microvolt = <5000000>;
  59                 regulator-always-on;
  60         };
  61
  62         sound-spdif {
  63                 compatible = "simple-audio-card";
  64                 simple-audio-card,name = "sun50i-h6-spdif";
  65
  66                 simple-audio-card,cpu {
  67                         sound-dai = <&spdif>;
  68                 };
  69
  70                 simple-audio-card,codec {
  71                         sound-dai = <&spdif_out>;
  72                 };
  73         };
  74
  75         spdif_out: spdif-out {
  76                 #sound-dai-cells = <0>;
  77                 compatible = "linux,spdif-dit";
  78         };
  79 };
  80
  81 &cpu0 {
  82         cpu-supply = <&reg_dcdca>;
  83 };
  84
  85 &de {
  86         status = "okay";
  87 };
  88
  89 &dwc3 {
  90         status = "okay";
  91 };
  92
  93 &ehci0 {
  94         status = "okay";
  95 };
  96
  97 &emac {
  98         pinctrl-names = "default";
  99         pinctrl-0 = <&ext_rgmii_pins>;
 100         phy-mode = "rgmii";
 101         phy-handle = <&ext_rgmii_phy>;
 102         phy-supply = <&reg_aldo2>;
 103         status = "okay";
 104 };
 105
 106 &gpu {
 107         mali-supply = <&reg_dcdcc>;
 108         status = "okay";
 109 };
 110
 111 &hdmi {
 112         status = "okay";
 113 };
 114
 115 &hdmi_out {
 116         hdmi_out_con: endpoint {
 117                 remote-endpoint = <&hdmi_con_in>;
 118         };
 119 };
 120
 121 &mdio {
 122         ext_rgmii_phy: ethernet-phy@1 {
 123                 compatible = "ethernet-phy-ieee802.3-c22";
 124                 reg = <1>;
 125         };
 126 };
 127
 128 &mmc0 {
 129         vmmc-supply = <&reg_cldo1>;
 130         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 131         bus-width = <4>;
 132         status = "okay";
 133 };
 134
 135 &mmc2 {
 136         vmmc-supply = <&reg_cldo1>;
 137         vqmmc-supply = <&reg_bldo2>;
 138         non-removable;
 139         cap-mmc-hw-reset;
 140         bus-width = <8>;
 141         status = "okay";
 142 };
 143
 144 &ohci0 {
 145         status = "okay";
 146 };
 147
 148 &pio {
 149         vcc-pd-supply = <&reg_cldo1>;
 150         vcc-pg-supply = <&reg_aldo1>;
 151 };
 152
 153 &r_i2c {
 154         status = "okay";
 155
 156         axp805: pmic@36 {
 157                 compatible = "x-powers,axp805", "x-powers,axp806";
 158                 reg = <0x36>;
 159                 interrupt-parent = <&r_intc>;
 160                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 161                 interrupt-controller;
 162                 #interrupt-cells = <1>;
 163                 x-powers,self-working-mode;
 164                 vina-supply = <&reg_vcc5v>;
 165                 vinb-supply = <&reg_vcc5v>;
 166                 vinc-supply = <&reg_vcc5v>;
 167                 vind-supply = <&reg_vcc5v>;
 168                 vine-supply = <&reg_vcc5v>;
 169                 aldoin-supply = <&reg_vcc5v>;
 170                 bldoin-supply = <&reg_vcc5v>;
 171                 cldoin-supply = <&reg_vcc5v>;
 172
 173                 regulators {
 174                         reg_aldo1: aldo1 {
 175                                 regulator-always-on;
 176                                 regulator-min-microvolt = <3300000>;
 177                                 regulator-max-microvolt = <3300000>;
 178                                 regulator-name = "vcc-pl";
 179                         };
 180
 181                         reg_aldo2: aldo2 {
 182                                 regulator-min-microvolt = <3300000>;
 183                                 regulator-max-microvolt = <3300000>;
 184                                 regulator-name = "vcc-ac200";
 185                                 regulator-enable-ramp-delay = <100000>;
 186                         };
 187
 188                         reg_aldo3: aldo3 {
 189                                 regulator-always-on;
 190                                 regulator-min-microvolt = <3300000>;
 191                                 regulator-max-microvolt = <3300000>;
 192                                 regulator-name = "vcc25-dram";
 193                         };
 194
 195                         reg_bldo1: bldo1 {
 196                                 regulator-always-on;
 197                                 regulator-min-microvolt = <1800000>;
 198                                 regulator-max-microvolt = <1800000>;
 199                                 regulator-name = "vcc-bias-pll";
 200                         };
 201
 202                         reg_bldo2: bldo2 {
 203                                 regulator-always-on;
 204                                 regulator-min-microvolt = <1800000>;
 205                                 regulator-max-microvolt = <1800000>;
 206                                 regulator-name = "vcc-efuse-pcie-hdmi-io";
 207                         };
 208
 209                         reg_bldo3: bldo3 {
 210                                 regulator-always-on;
 211                                 regulator-min-microvolt = <1800000>;
 212                                 regulator-max-microvolt = <1800000>;
 213                                 regulator-name = "vcc-dcxoio";
 214                         };
 215
 216                         bldo4 {
 217                                 /* unused */
 218                         };
 219
 220                         reg_cldo1: cldo1 {
 221                                 regulator-always-on;
 222                                 regulator-min-microvolt = <3300000>;
 223                                 regulator-max-microvolt = <3300000>;
 224                                 regulator-name = "vcc-3v3";
 225                         };
 226
 227                         reg_cldo2: cldo2 {
 228                                 regulator-min-microvolt = <3300000>;
 229                                 regulator-max-microvolt = <3300000>;
 230                                 regulator-name = "vcc-wifi-1";
 231                         };
 232
 233                         reg_cldo3: cldo3 {
 234                                 regulator-min-microvolt = <3300000>;
 235                                 regulator-max-microvolt = <3300000>;
 236                                 regulator-name = "vcc-wifi-2";
 237                         };
 238
 239                         reg_dcdca: dcdca {
 240                                 regulator-always-on;
 241                                 regulator-min-microvolt = <810000>;
 242                                 regulator-max-microvolt = <1160000>;
 243                                 regulator-ramp-delay = <2500>;
 244                                 regulator-name = "vdd-cpu";
 245                         };
 246
 247                         reg_dcdcc: dcdcc {
 248                                 regulator-enable-ramp-delay = <32000>;
 249                                 regulator-min-microvolt = <810000>;
 250                                 regulator-max-microvolt = <1080000>;
 251                                 regulator-ramp-delay = <2500>;
 252                                 regulator-name = "vdd-gpu";
 253                         };
 254
 255                         reg_dcdcd: dcdcd {
 256                                 regulator-always-on;
 257                                 regulator-min-microvolt = <960000>;
 258                                 regulator-max-microvolt = <960000>;
 259                                 regulator-name = "vdd-sys";
 260                         };
 261
 262                         reg_dcdce: dcdce {
 263                                 regulator-always-on;
 264                                 regulator-min-microvolt = <1200000>;
 265                                 regulator-max-microvolt = <1200000>;
 266                                 regulator-name = "vcc-dram";
 267                         };
 268
 269                         sw {
 270                                 /* unused */
 271                         };
 272                 };
 273         };
 274 };
 275
 276 &r_ir {
 277         linux,rc-map-name = "rc-beelink-gs1";
 278         status = "okay";
 279 };
 280
 281 &r_pio {
 282         /*
 283          * PL0 and PL1 are used for PMIC I2C
 284          * don't enable the pl-supply else
 285          * it will fail at boot
 286          *
 287          * vcc-pl-supply = <&reg_aldo1>;
 288          */
 289         vcc-pm-supply = <&reg_aldo1>;
 290 };
 291
 292 &rtc {
 293         clocks = <&ext_osc32k>;
 294 };
 295
 296 &spdif {
 297         status = "okay";
 298 };
 299
 300 &uart0 {
 301         pinctrl-names = "default";
 302         pinctrl-0 = <&uart0_ph_pins>;
 303         status = "okay";
 304 };
 305
 306 &usb2otg {
 307         dr_mode = "host";
 308         status = "okay";
 309 };
 310
 311 &usb2phy {
 312         usb0_vbus-supply = <&reg_vcc5v>;
 313         status = "okay";
 314 };
 315
 316 &usb3phy {
 317         status = "okay";
 318 };