src/arm64/freescale/imx8mq-hummingboard-pulse.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 /*
   3  * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "dt-bindings/usb/pd.h"
   9 #include "imx8mq-sr-som.dtsi"
  10
  11 / {
  12         model = "SolidRun i.MX8MQ HummingBoard Pulse";
  13         compatible = "solidrun,hummingboard-pulse", "fsl,imx8mq";
  14
  15         chosen {
  16                 stdout-path = &uart1;
  17         };
  18
  19         reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
  20                 compatible = "regulator-fixed";
  21                 pinctrl-names = "default";
  22                 pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
  23                 regulator-name = "VSD_3V3";
  24                 regulator-min-microvolt = <3300000>;
  25                 regulator-max-microvolt = <3300000>;
  26                 gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
  27         };
  28
  29         reg_v_5v0: regulator-v-5v0 {
  30                 compatible = "regulator-fixed";
  31                 regulator-name = "v_5v0";
  32                 regulator-max-microvolt = <5000000>;
  33                 regulator-min-microvolt = <5000000>;
  34                 regulator-always-on;
  35         };
  36 };
  37
  38 &i2c2 {
  39         pinctrl-names = "default";
  40         pinctrl-0 = <&pinctrl_i2c2>;
  41         clock-frequency = <100000>;
  42         status = "okay";
  43
  44         typec_ptn5100: usb-typec@50 {
  45                 compatible = "nxp,ptn5110";
  46                 reg = <0x50>;
  47                 pinctrl-names = "default";
  48                 pinctrl-0 = <&pinctrl_typec>;
  49                 interrupt-parent = <&gpio1>;
  50                 interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
  51
  52                 connector {
  53                         compatible = "usb-c-connector";
  54                         label = "USB-C";
  55                         data-role = "dual";
  56                         power-role = "dual";
  57                         try-power-role = "sink";
  58                         source-pdos = <PDO_FIXED(5000, 2000,
  59                                                  PDO_FIXED_USB_COMM |
  60                                                  PDO_FIXED_SUSPEND |
  61                                                  PDO_FIXED_EXTPOWER)>;
  62                         sink-pdos = <PDO_FIXED(5000, 2000,
  63                                                PDO_FIXED_USB_COMM |
  64                                                PDO_FIXED_SUSPEND |
  65                                                PDO_FIXED_EXTPOWER)
  66                                      PDO_FIXED(9000, 2000,
  67                                                PDO_FIXED_USB_COMM |
  68                                                PDO_FIXED_SUSPEND |
  69                                                PDO_FIXED_EXTPOWER)>;
  70                         op-sink-microwatt = <9000000>;
  71
  72                         port {
  73                                 typec1_dr_sw: endpoint {
  74                                         remote-endpoint = <&usb1_drd_sw>;
  75                                 };
  76                         };
  77                 };
  78         };
  79 };
  80
  81 &i2c3 {
  82         pinctrl-names = "default";
  83         pinctrl-0 = <&pinctrl_i2c3>;
  84         clock-frequency = <100000>;
  85         status = "okay";
  86
  87         rtc@69 {
  88                 compatible = "abracon,ab1805";
  89                 reg = <0x69>;
  90                 abracon,tc-diode = "schottky";
  91                 abracon,tc-resistor = <3>;
  92         };
  93 };
  94
  95 &uart2 { /* J35 header */
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&pinctrl_uart2>;
  98         assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
  99         assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
 100         status = "okay";
 101 };
 102
 103 &uart3 { /* Mikrobus */
 104         pinctrl-names = "default";
 105         pinctrl-0 = <&pinctrl_uart3>;
 106         assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
 107         assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
 108         uart-has-rtscts;
 109         status = "okay";
 110 };
 111
 112 &usdhc2 {
 113         assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
 114         assigned-clock-rates = <200000000>;
 115         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 116         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 117         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 118         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 119         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 120         vmmc-supply = <&reg_usdhc2_vmmc>;
 121         status = "okay";
 122 };
 123
 124 &usb_dwc3_0 {
 125         dr_mode = "otg";
 126         status = "okay";
 127
 128         port {
 129                 usb1_drd_sw: endpoint {
 130                         remote-endpoint = <&typec1_dr_sw>;
 131                 };
 132         };
 133 };
 134
 135 &usb_dwc3_1 {
 136         dr_mode = "host";
 137         status = "okay";
 138 };
 139
 140 &usb3_phy0 {
 141         status = "okay";
 142 };
 143
 144 &usb3_phy1 {
 145         status = "okay";
 146 };
 147
 148 &iomuxc {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_hog>;
 151
 152         pinctrl_hog: hoggrp {
 153                 fsl,pins = <
 154                         /* MikroBus Analog */
 155                         MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11             0x41
 156                         /* MikroBus Reset */
 157                         MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23               0x41
 158                         /*
 159                          * The following 2 pins need to be commented out and
 160                          * reconfigured to enable RTS/CTS on UART3
 161                          */
 162                         /* MikroBus PWM */
 163                         MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8              0x41
 164                         /* MikroBus INT */
 165                         MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9               0x41
 166                 >;
 167         };
 168
 169         pinctrl_i2c2: i2c2grp {
 170                 fsl,pins = <
 171                         MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL          0x4000007f
 172                         MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA          0x4000007f
 173                 >;
 174         };
 175
 176         pinctrl_i2c3: i2c3grp {
 177                 fsl,pins = <
 178                         MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x4000007f
 179                         MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x4000007f
 180                 >;
 181         };
 182
 183         pinctrl_typec: typecgrp {
 184                 fsl,pins = <
 185                         MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15       0x16
 186                         MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6       0x17059
 187                 >;
 188         };
 189
 190         pinctrl_uart2: uart2grp {
 191                 fsl,pins = <
 192                         MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX             0x49
 193                         MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX             0x49
 194                 >;
 195         };
 196
 197         pinctrl_uart3: uart3grp {
 198                 fsl,pins = <
 199                         MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX             0x49
 200                         MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX             0x49
 201                         /*
 202                          * These pins are by default GPIO on the Mikro Bus
 203                          * Header. To use RTS/CTS on UART3 comment them out
 204                          * of the hoggrp and enable them here
 205                          */
 206                         /* MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B     0x49 */
 207                         /* MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B      0x49 */
 208                 >;
 209         };
 210
 211         pinctrl_usdhc2_gpio: usdhc2grpgpio {
 212                 fsl,pins = <
 213                         MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12        0x41
 214                 >;
 215         };
 216
 217         pinctrl_usdhc2_vmmc: usdhc2vmmcgpio {
 218                 fsl,pins = <
 219                         MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13      0x41
 220                 >;
 221         };
 222
 223         pinctrl_usdhc2: usdhc2grp {
 224                 fsl,pins = <
 225                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                 0x83
 226                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                 0xc3
 227                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0             0xc3
 228                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1             0xc3
 229                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2             0xc3
 230                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3             0xc3
 231                         MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT          0xc1
 232                 >;
 233         };
 234
 235         pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
 236                 fsl,pins = <
 237                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                 0x8d
 238                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                 0xcd
 239                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0             0xcd
 240                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1             0xcd
 241                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2             0xcd
 242                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3             0xcd
 243                         MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT          0xc1
 244                 >;
 245         };
 246
 247         pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
 248                 fsl,pins = <
 249                         MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                 0x9f
 250                         MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                 0xdf
 251                         MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0             0xdf
 252                         MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1             0xdf
 253                         MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2             0xdf
 254                         MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3             0xdf
 255                         MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT          0xc1
 256                 >;
 257         };
 258 };