1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Copyright (c) 2017 PINE64
10 model = "Pine64 Rock64";
11 compatible = "pine64,rock64", "rockchip,rk3328";
14 stdout-path = "serial2:1500000n8";
17 gmac_clkin: external-gmac-clock {
18 compatible = "fixed-clock";
19 clock-frequency = <125000000>;
20 clock-output-names = "gmac_clkin";
24 vcc_sd: sdmmc-regulator {
25 compatible = "regulator-fixed";
26 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
27 pinctrl-names = "default";
28 pinctrl-0 = <&sdmmc0m1_gpio>;
29 regulator-name = "vcc_sd";
30 regulator-min-microvolt = <3300000>;
31 regulator-max-microvolt = <3300000>;
32 vin-supply = <&vcc_io>;
35 vcc_host_5v: vcc-host-5v-regulator {
36 compatible = "regulator-fixed";
38 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
39 pinctrl-names = "default";
40 pinctrl-0 = <&usb30_host_drv>;
41 regulator-name = "vcc_host_5v";
44 vin-supply = <&vcc_sys>;
47 vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
48 compatible = "regulator-fixed";
49 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
50 pinctrl-names = "default";
51 pinctrl-0 = <&usb20_host_drv>;
52 regulator-name = "vcc_host1_5v";
55 vin-supply = <&vcc_sys>;
59 compatible = "regulator-fixed";
60 regulator-name = "vcc_sys";
63 regulator-min-microvolt = <5000000>;
64 regulator-max-microvolt = <5000000>;
68 compatible = "audio-graph-card";
69 label = "rockchip,rk3328";
75 compatible = "linux,spdif-dit";
76 #sound-dai-cells = <0>;
80 remote-endpoint = <&spdif_p0_0>;
90 codec_p0_0: endpoint {
91 remote-endpoint = <&i2s1_p0_0>;
97 cpu-supply = <&vdd_arm>;
101 cpu-supply = <&vdd_arm>;
105 cpu-supply = <&vdd_arm>;
109 cpu-supply = <&vdd_arm>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
119 vmmc-supply = <&vcc_io>;
120 vqmmc-supply = <&vcc18_emmc>;
125 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
126 assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
127 clock_in_out = "input";
128 phy-supply = <&vcc_io>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&rgmiim1_pins>;
132 snps,force_thresh_dma_mode;
133 snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
134 snps,reset-active-low;
135 snps,reset-delays-us = <0 10000 50000>;
153 compatible = "rockchip,rk805";
155 interrupt-parent = <&gpio2>;
156 interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
158 clock-output-names = "xin32k", "rk805-clkout2";
159 pinctrl-names = "default";
160 pinctrl-0 = <&pmic_int_l>;
161 rockchip,system-power-controller;
164 vcc1-supply = <&vcc_sys>;
165 vcc2-supply = <&vcc_sys>;
166 vcc3-supply = <&vcc_sys>;
167 vcc4-supply = <&vcc_sys>;
168 vcc5-supply = <&vcc_io>;
169 vcc6-supply = <&vcc_sys>;
172 vdd_logic: DCDC_REG1 {
173 regulator-name = "vdd_logic";
174 regulator-min-microvolt = <712500>;
175 regulator-max-microvolt = <1450000>;
176 regulator-ramp-delay = <12500>;
179 regulator-state-mem {
180 regulator-on-in-suspend;
181 regulator-suspend-microvolt = <1000000>;
186 regulator-name = "vdd_arm";
187 regulator-min-microvolt = <712500>;
188 regulator-max-microvolt = <1450000>;
189 regulator-ramp-delay = <12500>;
192 regulator-state-mem {
193 regulator-on-in-suspend;
194 regulator-suspend-microvolt = <950000>;
199 regulator-name = "vcc_ddr";
202 regulator-state-mem {
203 regulator-on-in-suspend;
208 regulator-name = "vcc_io";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
213 regulator-state-mem {
214 regulator-on-in-suspend;
215 regulator-suspend-microvolt = <3300000>;
220 regulator-name = "vdd_18";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
225 regulator-state-mem {
226 regulator-on-in-suspend;
227 regulator-suspend-microvolt = <1800000>;
231 vcc18_emmc: LDO_REG2 {
232 regulator-name = "vcc_18emmc";
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
237 regulator-state-mem {
238 regulator-on-in-suspend;
239 regulator-suspend-microvolt = <1800000>;
244 regulator-name = "vdd_10";
245 regulator-min-microvolt = <1000000>;
246 regulator-max-microvolt = <1000000>;
249 regulator-state-mem {
250 regulator-on-in-suspend;
251 regulator-suspend-microvolt = <1000000>;
262 i2s1_p0_0: endpoint {
265 remote-endpoint = <&codec_p0_0>;
273 vccio1-supply = <&vcc_io>;
274 vccio2-supply = <&vcc18_emmc>;
275 vccio3-supply = <&vcc_io>;
276 vccio4-supply = <&vcc_18>;
277 vccio5-supply = <&vcc_io>;
278 vccio6-supply = <&vcc_io>;
279 pmuio-supply = <&vcc_io>;
284 pmic_int_l: pmic-int-l {
285 rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
290 usb20_host_drv: usb20-host-drv {
291 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
296 usb30_host_drv: usb30-host-drv {
297 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
307 max-frequency = <150000000>;
308 pinctrl-names = "default";
309 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
310 vmmc-supply = <&vcc_sd>;
315 pinctrl-0 = <&spdifm0_tx>;
319 spdif_p0_0: endpoint {
320 remote-endpoint = <&dit_p0_0>;
329 compatible = "jedec,spi-nor";
332 /* maximum speed for Rockchip SPI */
333 spi-max-frequency = <50000000>;
338 rockchip,hw-tshut-mode = <0>;
339 rockchip,hw-tshut-polarity = <0>;
350 u2phy_host: host-port {
354 u2phy_otg: otg-port {