1 .\" Copyright (c) 1999 Daniel C. Sobral
2 .\" All rights reserved.
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\" notice, this list of conditions and the following disclaimer.
9 .\" 2. Redistributions in binary form must reproduce the above copyright
10 .\" notice, this list of conditions and the following disclaimer in the
11 .\" documentation and/or other materials provided with the distribution.
13 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 .Nd kernel bootstrapping final stage
38 kernel bootstrapping process.
39 On IA32 (i386) architectures, it is a
42 It is linked statically to
44 and usually located in the directory
47 It provides a scripting language that can be used to
48 automate tasks, do pre-configuration or assist in recovery
50 This scripting language is roughly divided in
52 The smaller one is a set of commands
53 designed for direct use by the casual user, called "builtin
54 commands" for historical reasons.
55 The main drive behind these commands is user-friendliness.
56 The bigger component is an
58 Forth compatible Forth interpreter based on FICL, by
61 During initialization,
63 will probe for a console and set the
65 variable, or set it to serial console
67 if the previous boot stage used that.
68 If multiple consoles are selected, they will be listed separated by spaces.
69 Then, devices are probed,
78 is initialized, the builtin words are added to its vocabulary, and
80 is processed if it exists.
81 No disk switching is possible while that file is being read.
93 is processed if available.
94 These files are processed through the
96 command, which reads all of them into memory before processing them,
97 making disk changes possible.
101 has not been tried, and if
105 (not case sensitive), then an
108 If the system gets past this point,
112 will engage interactive mode.
113 Please note that historically even when
117 user will be able to interrupt autoboot process by pressing some key
118 on the console while kernel and modules are being loaded.
120 cases such behaviour may be undesirable, to prevent it set
126 will engage interactive mode only if
132 builtin commands take parameters from the command line.
134 the only way to call them from a script is by using
137 If an error condition occurs, an exception will be generated,
138 which can be intercepted using
140 Forth exception handling
142 If not intercepted, an error message will be displayed and
143 the interpreter's state will be reset, emptying the stack and restoring
146 The builtin commands available are:
148 .Bl -tag -width Ds -compact
149 .It Ic autoboot Op Ar seconds Op Ar prompt
150 Proceeds to bootstrap the system after a number of seconds, if not
151 interrupted by the user.
152 Displays a countdown prompt
153 warning the user the system is about to be booted,
154 unless interrupted by a key press.
155 The kernel will be loaded first if necessary.
156 Defaults to 10 seconds.
159 Displays statistics about disk cache usage.
163 .It Ic boot Ar kernelname Op Cm ...
164 .It Ic boot Fl flag Cm ...
165 Immediately proceeds to bootstrap the system, loading the kernel
167 Any flags or arguments are passed to the kernel, but they
168 must precede the kernel name, if a kernel name is provided.
171 The behavior of this builtin is changed if
179 Displays text on the screen.
180 A new line will be printed unless
185 Displays memory usage statistics.
186 For debugging purposes only.
188 .It Ic help Op topic Op subtopic
189 Shows help messages read from
190 .Pa /boot/loader.help .
193 will list the topics available.
195 .It Ic include Ar file Op Ar
196 Process script files.
197 Each file, in turn, is completely read into memory,
198 and then each of its lines is passed to the command line interpreter.
199 If any error is returned by the interpreter, the include
200 command aborts immediately, without reading any other files, and
201 returns an error itself (see
208 Loads a kernel, kernel loadable module (kld), disk image,
209 or file of opaque contents tagged as being of the type
211 Kernel and modules can be either in a.out or ELF format.
212 Any arguments passed after the name of the file to be loaded
213 will be passed as arguments to that file.
216 type to make the kernel create a file-backed
219 This is useful for booting from a temporary rootfs.
220 Currently, argument passing does not work for the kernel.
228 encryption keyfile for the given provider name.
229 The key index can be specified via
231 or will default to zero.
237 Displays a listing of files in the directory
239 or the root directory if
244 is specified, file sizes will be shown too.
247 Lists all of the devices from which it may be possible to load modules.
250 is specified, more details are printed.
253 Displays loaded modules.
256 is specified, more details are shown.
258 .It Ic more Ar file Op Ar
259 Display the files specified, with a pause at each
263 .It Ic pnpscan Op Fl v
264 Scans for Plug-and-Play devices.
265 This is not functional at present.
272 Reads a line of input from the terminal, storing it in
275 A timeout can be specified with
277 though it will be canceled at the first key pressed.
278 A prompt may also be displayed through the
283 Immediately reboots the system.
285 .It Ic set Ar variable
286 .It Ic set Ar variable Ns = Ns Ar value
287 Set loader's environment variables.
289 .It Ic show Op Va variable
290 Displays the specified variable's value, or all variables and their
296 Remove all modules from memory.
298 .It Ic unset Va variable
301 from the environment.
304 Lists available commands.
306 .Ss BUILTIN ENVIRONMENT VARIABLES
309 has actually two different kinds of
312 There are ANS Forth's
313 .Em environmental queries ,
314 and a separate space of environment variables used by builtins, which
315 are not directly available to Forth words.
316 It is the latter type that this section covers.
318 Environment variables can be set and unset through the
322 builtins, and can have their values interactively examined through the
326 Their values can also be accessed as described in
329 Notice that these environment variables are not inherited by any shell
330 after the system has been booted.
332 A few variables are set automatically by
334 Others can affect the behavior of either
336 or the kernel at boot.
337 Some options may require a value,
338 while others define behavior just by being set.
339 Both types of builtin variables are described below.
340 .Bl -tag -width bootfile
341 .It Va autoboot_delay
344 will wait before booting.
345 If this variable is not defined,
347 will default to 10 seconds.
353 will be automatically attempted after processing
354 .Pa /boot/loader.rc ,
357 will be processed normally, defaulting to 10 seconds delay.
361 no delay will be inserted, but user still will be able to interrupt
363 process and escape into the interactive mode by pressing some key
364 on the console while kernel and
365 modules are being loaded.
369 no delay will be inserted and
371 will engage interactive mode only if
373 has failed for some reason.
375 Instructs the kernel to prompt the user for the name of the root device
376 when the kernel is booted.
378 Instructs the kernel to try to mount the root file system from CD-ROM.
380 Instructs the kernel to start in the DDB debugger, rather than
381 proceeding to initialize when booted.
383 Instructs the kernel to mount the statically compiled-in root file system.
385 Selects gdb-remote mode for the kernel debugger by default.
386 .It Va boot_multicons
387 Enables multiple console support in the kernel early on boot.
388 In a running system, console configuration can be manipulated
393 All console output is suppressed when console is muted.
394 In a running system, the state of console muting can be manipulated by the
398 During the device probe, pause after each line is printed.
400 Force the use of a serial console even when an internal console
403 Prevents the kernel from initiating a multi-user startup; instead,
404 a single-user mode will be entered when the kernel has finished
407 Setting this variable causes extra debugging information to be printed
408 by the kernel during the boot phase.
410 List of semicolon-separated search path for bootable kernels.
413 .It Va comconsole_speed
414 Defines the speed of the serial console (i386 and amd64 only).
415 If the previous boot stage indicated that a serial console is in use
416 then this variable is initialized to the current speed of the console
418 Otherwise it is set to 9600 unless this was overridden using the
419 .Va BOOT_COMCONSOLE_SPEED
425 variable take effect immediately.
426 .It Va comconsole_port
427 Defines the base i/o port used to access console UART
428 (i386 and amd64 only).
429 If the variable is not set, its assumed value is 0x3F8, which
430 corresponds to PC port COM1, unless overridden by
431 .Va BOOT_COMCONSOLE_PORT
432 variable during the compilation of
436 variable automatically set
438 environment variable to provide a hint to kernel for location of the console.
439 Loader console is changed immediately after variable
442 .It Va comconsole_pcidev
443 Defines the location of a PCI device of the 'simple communication'
444 class to be used as the serial console UART (i386 and amd64 only).
445 The syntax of the variable is
446 .Li 'bus:device:function[:bar]' ,
447 where all members must be numeric, with possible
449 prefix to indicate a hexadecimal value.
452 member is optional and assumed to be 0x10 if omitted.
453 The bar must decode i/o space.
455 .Va comconsole_pcidev
456 automatically sets the variable
458 to the base of the selected bar, and hint
459 .Va hw.uart.console .
460 Loader console is changed immediately after variable
461 .Va comconsole_pcidev
464 Defines the current console or consoles.
465 Multiple consoles may be specified.
466 In that case, the first listed console will become the default console for
467 userland output (e.g.\& from
470 Selects the default device.
471 Syntax for devices is odd.
473 Sets the device for kernel dumps.
474 This can be used to ensure that a device is configured before the corresponding
478 has been processed, allowing kernel panics that happen during the early stages
479 of boot to be captured.
481 If set to a valid directory in the root file system, it causes
485 operation on that directory, making it the new root directory.
486 That happens before entering single-user mode or multi-user
487 mode (but after executing the
490 This functionality has generally been eclipsed by rerooting.
496 Sets the list of binaries which the kernel will try to run as the initial
498 The first matching binary is used.
500 .Dq Li /sbin/init:/sbin/oinit:/sbin/init.bak:\:/rescue/init .
502 If set to a valid file name in the root file system,
505 to run that script as the very first action,
506 before doing anything else.
507 Signal handling and exit code interpretation is similar to
511 In particular, single-user operation is enforced
512 if the script terminates with a non-zero exit code,
513 or if a SIGTERM is delivered to the
516 This functionality has generally been eclipsed by rerooting.
522 Defines the shell binary to be used for executing the various shell scripts.
525 It is used for running the
527 if set, as well as for the
532 The value of the corresponding
534 variable is evaluated every time
536 calls a shell script, so it can be changed later on using the
539 In particular, if a non-default shell is used for running an
541 it might be desirable to have that script reset the value of
543 back to the default, so that the
545 script is executed with the standard shell
550 if the Forth's current state is interpreting.
552 Define the number of lines on the screen, to be used by the pager.
554 Sets the list of directories which will be searched for modules
555 named in a load command or implicitly required by a dependency.
556 The default value for this variable is
557 .Dq Li /boot/kernel;/boot/modules .
559 Sets the number of IDE disks as a workaround for some problems in
560 finding the root disk at boot.
561 This has been deprecated in favor of
568 .Dq Li "${interpret}" .
571 is unset, the default prompt is
573 .It Va root_disk_unit
574 If the code which detects the disk unit number for the root disk is
575 confused, e.g.\& by a mix of SCSI and IDE disks, or IDE disks with
576 gaps in the sequence (e.g.\& no primary slave), the unit number can
577 be forced by setting this variable.
579 By default the value of
581 is used to set the root file system
582 when the kernel is booted.
583 This can be overridden by setting
588 Other variables are used to override kernel tunable parameters.
589 The following tunables are available:
592 Limit the amount of physical memory the system will use.
593 By default the size is in bytes, but the
594 .Cm k , K , m , M , g
598 are also accepted and indicate kilobytes, megabytes and gigabytes
600 An invalid suffix will result in the variable being ignored by the
602 .It Va hw.pci.host_start_mem , hw.acpi.host_start_mem
603 When not otherwise constrained, this limits the memory start
605 The default is 0x80000000 and should be set to at least size of the
606 memory and not conflict with other resources.
607 Typically, only systems without PCI bridges need to set this variable
608 since PCI bridges typically constrain the memory starting address
609 (and the variable is only used when bridges do not constrain this
611 .It Va hw.pci.enable_io_modes
612 Enable PCI resources which are left off by some BIOSes or are not
613 enabled correctly by the device driver.
614 Tunable value set to ON (1) by default, but this may cause problems
615 with some peripherals.
617 Set the size of a number of statically allocated system tables; see
619 for a description of how to select an appropriate value for this
621 When set, this tunable replaces the value declared in the kernel
622 compile-time configuration file.
623 .It Va kern.ipc.nmbclusters
624 Set the number of mbuf clusters to be allocated.
625 The value cannot be set below the default
626 determined when the kernel was compiled.
627 .It Va kern.ipc.nsfbufs
630 buffers to be allocated.
633 Not all architectures use such buffers; see
636 .It Va kern.maxswzone
637 Limits the amount of KVM to be used to hold swap
638 metadata, which directly governs the
639 maximum amount of swap the system can support,
640 at the rate of approximately 200 MB of swap space
641 per 1 MB of metadata.
642 This value is specified in bytes of KVA space.
643 If no value is provided, the system allocates
644 enough memory to handle an amount of swap
645 that corresponds to eight times the amount of
646 physical memory present in the system.
648 Note that swap metadata can be fragmented,
649 which means that the system can run out of
650 space before it reaches the theoretical limit.
651 Therefore, care should be taken to not configure
652 more swap than approximately half of the
655 Running out of space for swap metadata can leave
656 the system in an unrecoverable state.
657 Therefore, you should only change
658 this parameter if you need to greatly extend the
659 KVM reservation for other resources such as the
661 .Va kern.ipc.nmbclusters .
662 Modifies kernel option
663 .Dv VM_SWZONE_SIZE_MAX .
664 .It Va kern.maxbcache
665 Limits the amount of KVM reserved for use by the
666 buffer cache, specified in bytes.
667 The default maximum is 200MB on i386,
668 and 400MB on amd64 and sparc64.
669 This parameter is used to
670 prevent the buffer cache from eating too much
671 KVM in large-memory machine configurations.
672 Only mess around with this parameter if you need to
673 greatly extend the KVM reservation for other resources
674 such as the swap zone or
675 .Va kern.ipc.nmbclusters .
677 the NBUF parameter will override this limit.
679 .Dv VM_BCACHE_SIZE_MAX .
680 .It Va kern.msgbufsize
681 Sets the size of the kernel message buffer.
682 The default limit of 64KB is usually sufficient unless
683 large amounts of trace data need to be collected
684 between opportunities to examine the buffer or
686 Overrides kernel option
688 .It Va machdep.disable_mtrrs
689 Disable the use of i686 MTRRs (x86 only).
690 .It Va net.inet.tcp.tcbhashsize
691 Overrides the compile-time set value of
693 or the preset default of 512.
694 Must be a power of 2.
695 .It Va twiddle_divisor
696 Throttles the output of the
698 I/O progress indicator displayed while loading the kernel and modules.
699 This is useful on slow serial consoles where the time spent waiting for
700 these characters to be written can add up to many seconds.
701 The default is 1 (full speed); a value of 2 spins half as fast, and so on.
703 Sets the size of kernel memory (bytes).
704 This overrides the value determined when the kernel was compiled.
707 .It Va vm.kmem_size_min
708 .It Va vm.kmem_size_max
709 Sets the minimum and maximum (respectively) amount of kernel memory
710 that will be automatically allocated by the kernel.
711 These override the values determined when the kernel was compiled.
715 .Dv VM_KMEM_SIZE_MAX .
718 When a builtin command is executed, the rest of the line is taken
719 by it as arguments, and it is processed by a special parser which
720 is not used for regular Forth commands.
722 This special parser applies the following rules to the parsed text:
725 All backslash characters are preprocessed.
728 \eb , \ef , \er , \en and \et are processed as in C.
730 \es is converted to a space.
737 Useful for things like
740 \e0xN and \e0xNN are replaced by the hex N or NN.
742 \eNNN is replaced by the octal NNN
746 \e" , \e' and \e$ will escape these characters, preventing them from
747 receiving special treatment in Step 2, described below.
749 \e\e will be replaced with a single \e .
751 In any other occurrence, backslash will just be removed.
754 Every string between non-escaped quotes or double-quotes will be treated
755 as a single word for the purposes of the remaining steps.
761 with the value of the environment variable
764 Space-delimited arguments are passed to the called builtin command.
765 Spaces can also be escaped through the use of \e\e .
768 An exception to this parsing rule exists, and is described in
769 .Sx BUILTINS AND FORTH .
770 .Ss BUILTINS AND FORTH
771 All builtin words are state-smart, immediate words.
772 If interpreted, they behave exactly as described previously.
773 If they are compiled, though,
774 they extract their arguments from the stack instead of the command line.
776 If compiled, the builtin words expect to find, at execution time, the
777 following parameters on the stack:
778 .D1 Ar addrN lenN ... addr2 len2 addr1 len1 N
781 are strings which will compose the command line that will be parsed
782 into the builtin's arguments.
783 Internally, these strings are concatenated in from 1 to N,
784 with a space put between each one.
786 If no arguments are passed, a 0
788 be passed, even if the builtin accepts no arguments.
790 While this behavior has benefits, it has its trade-offs.
791 If the execution token of a builtin is acquired (through
799 the builtin behavior will depend on the system state
807 This is particularly annoying for programs that want or need to
809 In this case, the use of a proxy is recommended.
814 is a Forth interpreter written in C, in the form of a forth
815 virtual machine library that can be called by C functions and vice
820 each line read interactively is then fed to
824 back to execute the builtin words.
831 The words available to
833 can be classified into four groups.
836 Forth standard words, extra
840 words, and the builtin commands;
841 the latter were already described.
844 Forth standard words are listed in the
847 The words falling in the two other groups are described in the
848 following subsections.
850 .Bl -tag -width wid-set-super
858 This is the STRING word set's
865 This is the STRING word set's
875 .Ss FREEBSD EXTRA WORDS
876 .Bl -tag -width XXXXXXXX
878 Evaluates the remainder of the input buffer, after having printed it first.
880 Evaluates the remainder of the input buffer under a
886 but without outputting a trailing space.
887 .It Ic fclose Pq Ar fd --
889 .It Ic fkey Pq Ar fd -- char
890 Reads a single character from a file.
891 .It Ic fload Pq Ar fd --
894 .It Ic fopen Pq Ar addr len mode Li -- Ar fd
896 Returns a file descriptor, or \-1 in case of failure.
899 parameter selects whether the file is to be opened for read access, write
902 .Dv O_RDONLY , O_WRONLY ,
906 .Pa /boot/support.4th ,
907 indicating read only, write only, and read-write access, respectively.
910 .Pq Ar fd addr len -- len'
918 Returns the actual number of bytes read, or -1 in case of error or end of
920 .It Ic heap? Pq -- Ar cells
921 Return the space remaining in the dictionary heap, in cells.
922 This is not related to the heap used by dynamic memory allocation words.
923 .It Ic inb Pq Ar port -- char
924 Reads a byte from a port.
925 .It Ic key Pq -- Ar char
926 Reads a single character from the console.
927 .It Ic key? Pq -- Ar flag
930 if there is a character available to be read from the console.
935 .It Ic outb Pq Ar port char --
936 Writes a byte to a port.
937 .It Ic seconds Pq -- Ar u
938 Returns the number of seconds since midnight.
939 .It Ic tib> Pq -- Ar addr len
940 Returns the remainder of the input buffer as a string on the stack.
941 .It Ic trace! Pq Ar flag --
942 Activates or deactivates tracing.
946 .Ss FREEBSD DEFINED ENVIRONMENTAL QUERIES
950 if the architecture is IA32.
953 version at compile time.
958 .Ss SYSTEM DOCUMENTATION
960 .Bl -tag -width /boot/defaults/loader.conf -compact
964 .It Pa /boot/boot.4th
968 .It Pa /boot/defaults/loader.conf
969 .It Pa /boot/loader.conf
970 .It Pa /boot/loader.conf.local
972 configuration files, as described in
974 .It Pa /boot/loader.rc
976 bootstrapping script.
977 .It Pa /boot/loader.help
980 Contains the help messages.
983 Boot in single user mode:
987 Load the kernel, a splash screen, and then autoboot in five seconds.
988 Notice that a kernel must be loaded before any other
990 command is attempted.
991 .Bd -literal -offset indent
994 load -t splash_image_data /boot/chuckrulez.bmp
998 Set the disk unit of the root device to 2, and then boot.
999 This would be needed in a system with two IDE disks,
1000 with the second IDE disk hardwired to ada2 instead of ada1.
1001 .Bd -literal -offset indent
1002 set root_disk_unit=2
1003 boot /boot/kernel/kernel
1007 .Bl -tag -width /usr/share/examples/bootforth/X
1008 .It Pa /boot/loader.4th
1009 Extra builtin-like words.
1010 .It Pa /boot/support.4th
1013 .It Pa /usr/share/examples/bootforth/
1017 The following values are thrown by
1019 .Bl -tag -width XXXXX -offset indent
1021 Any type of error in the processing of a builtin.
1032 Out of interpreting text.
1034 Need more text to succeed -- will finish on next run.
1048 For the purposes of ANS Forth compliance, loader is an
1050 ANS Forth System with Environmental Restrictions, Providing
1056 parse, pick, roll, refill, to, value, \e, false, true,
1059 compile\&, , erase, nip, tuck
1064 from the Core Extensions word set, Providing the Exception Extensions
1065 word set, Providing the Locals Extensions word set, Providing the
1066 Memory-Allocation Extensions word set, Providing
1070 bye, forget, see, words,
1077 from the Programming-Tools extension word set, Providing the
1078 Search-Order extensions word set.
1090 .An Michael Smith Aq msmith@FreeBSD.org .
1094 .An John Sadler Aq john_sadler@alum.mit.edu .
1100 words will read from the input buffer instead of the console.
1101 The latter will be fixed, but the former will not.