2 * Copyright (c) 2003 Peter Wemm.
3 * Copyright (c) 1992 Terrence R. Lambert.
4 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California.
7 * This code is derived from software contributed to Berkeley by
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the University of
21 * California, Berkeley and its contributors.
22 * 4. Neither the name of the University nor the names of its contributors
23 * may be used to endorse or promote products derived from this software
24 * without specific prior written permission.
26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91
41 #include <sys/cdefs.h>
42 __FBSDID("$FreeBSD$");
44 #include "opt_atpic.h"
45 #include "opt_compat.h"
50 #include "opt_kstack_pages.h"
51 #include "opt_maxmem.h"
52 #include "opt_mp_watchdog.h"
53 #include "opt_platform.h"
54 #include "opt_sched.h"
56 #include <sys/param.h>
58 #include <sys/systm.h>
62 #include <sys/callout.h>
66 #include <sys/eventhandler.h>
68 #include <sys/imgact.h>
70 #include <sys/kernel.h>
72 #include <sys/linker.h>
74 #include <sys/malloc.h>
75 #include <sys/memrange.h>
76 #include <sys/msgbuf.h>
77 #include <sys/mutex.h>
79 #include <sys/ptrace.h>
80 #include <sys/reboot.h>
81 #include <sys/rwlock.h>
82 #include <sys/sched.h>
83 #include <sys/signalvar.h>
87 #include <sys/syscallsubr.h>
88 #include <sys/sysctl.h>
89 #include <sys/sysent.h>
90 #include <sys/sysproto.h>
91 #include <sys/ucontext.h>
92 #include <sys/vmmeter.h>
95 #include <vm/vm_extern.h>
96 #include <vm/vm_kern.h>
97 #include <vm/vm_page.h>
98 #include <vm/vm_map.h>
99 #include <vm/vm_object.h>
100 #include <vm/vm_pager.h>
101 #include <vm/vm_param.h>
105 #error KDB must be enabled in order for DDB to work!
108 #include <ddb/db_sym.h>
111 #include <net/netisr.h>
113 #include <machine/clock.h>
114 #include <machine/cpu.h>
115 #include <machine/cputypes.h>
116 #include <machine/intr_machdep.h>
118 #include <machine/md_var.h>
119 #include <machine/metadata.h>
120 #include <machine/mp_watchdog.h>
121 #include <machine/pc/bios.h>
122 #include <machine/pcb.h>
123 #include <machine/proc.h>
124 #include <machine/reg.h>
125 #include <machine/sigframe.h>
126 #include <machine/specialreg.h>
127 #include <machine/tss.h>
129 #include <machine/smp.h>
136 #include <x86/isa/icu.h>
138 #include <x86/apicvar.h>
141 #include <isa/isareg.h>
143 #include <x86/init.h>
145 /* Sanity check for __curthread() */
146 CTASSERT(offsetof(struct pcpu, pc_curthread) == 0);
148 extern u_int64_t hammer_time(u_int64_t, u_int64_t);
150 #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL)
151 #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0)
153 static void cpu_startup(void *);
154 static void get_fpcontext(struct thread *td, mcontext_t *mcp,
155 char *xfpusave, size_t xfpusave_len);
156 static int set_fpcontext(struct thread *td, mcontext_t *mcp,
157 char *xfpustate, size_t xfpustate_len);
158 SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL);
160 /* Preload data parse function */
161 static caddr_t native_parse_preload_data(u_int64_t);
163 /* Native function to fetch and parse the e820 map */
164 static void native_parse_memmap(caddr_t, vm_paddr_t *, int *);
166 /* Default init_ops implementation. */
167 struct init_ops init_ops = {
168 .parse_preload_data = native_parse_preload_data,
169 .early_clock_source_init = i8254_init,
170 .early_delay = i8254_delay,
171 .parse_memmap = native_parse_memmap,
173 .mp_bootaddress = mp_bootaddress,
174 .start_all_aps = native_start_all_aps,
176 .msi_init = msi_init,
180 * The file "conf/ldscript.amd64" defines the symbol "kernphys". Its value is
181 * the physical address at which the kernel is loaded.
183 extern char kernphys[];
185 struct msgbuf *msgbufp;
188 * Physical address of the EFI System Table. Stashed from the metadata hints
189 * passed into the kernel and used by the EFI code to call runtime services.
191 vm_paddr_t efi_systbl_phys;
193 /* Intel ICH registers */
194 #define ICH_PMBASE 0x400
195 #define ICH_SMI_EN ICH_PMBASE + 0x30
197 int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel;
205 * The number of PHYSMAP entries must be one less than the number of
206 * PHYSSEG entries because the PHYSMAP entry that spans the largest
207 * physical address that is accessible by ISA DMA is split into two
210 #define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1))
212 vm_paddr_t phys_avail[PHYSMAP_SIZE + 2];
213 vm_paddr_t dump_avail[PHYSMAP_SIZE + 2];
215 /* must be 2 less so 0 0 can signal end of chunks */
216 #define PHYS_AVAIL_ARRAY_END (nitems(phys_avail) - 2)
217 #define DUMP_AVAIL_ARRAY_END (nitems(dump_avail) - 2)
219 struct kva_md_info kmi;
221 static struct trapframe proc0_tf;
222 struct region_descriptor r_gdt, r_idt;
224 struct pcpu __pcpu[MAXCPU];
228 struct mem_range_softc mem_range_softc;
230 struct mtx dt_lock; /* lock for GDT and LDT */
232 void (*vmm_resume_p)(void);
242 * On MacBooks, we need to disallow the legacy USB circuit to
243 * generate an SMI# because this can cause several problems,
244 * namely: incorrect CPU frequency detection and failure to
246 * We do this by disabling a bit in the SMI_EN (SMI Control and
247 * Enable register) of the Intel ICH LPC Interface Bridge.
249 sysenv = kern_getenv("smbios.system.product");
250 if (sysenv != NULL) {
251 if (strncmp(sysenv, "MacBook1,1", 10) == 0 ||
252 strncmp(sysenv, "MacBook3,1", 10) == 0 ||
253 strncmp(sysenv, "MacBook4,1", 10) == 0 ||
254 strncmp(sysenv, "MacBookPro1,1", 13) == 0 ||
255 strncmp(sysenv, "MacBookPro1,2", 13) == 0 ||
256 strncmp(sysenv, "MacBookPro3,1", 13) == 0 ||
257 strncmp(sysenv, "MacBookPro4,1", 13) == 0 ||
258 strncmp(sysenv, "Macmini1,1", 10) == 0) {
260 printf("Disabling LEGACY_USB_EN bit on "
262 outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8);
268 * Good {morning,afternoon,evening,night}.
274 * Display physical memory if SMBIOS reports reasonable amount.
277 sysenv = kern_getenv("smbios.memory.enabled");
278 if (sysenv != NULL) {
279 memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10;
282 if (memsize < ptoa((uintmax_t)vm_cnt.v_free_count))
283 memsize = ptoa((uintmax_t)Maxmem);
284 printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20);
285 realmem = atop(memsize);
288 * Display any holes after the first chunk of extended memory.
293 printf("Physical memory chunk(s):\n");
294 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) {
297 size = phys_avail[indx + 1] - phys_avail[indx];
299 "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n",
300 (uintmax_t)phys_avail[indx],
301 (uintmax_t)phys_avail[indx + 1] - 1,
302 (uintmax_t)size, (uintmax_t)size / PAGE_SIZE);
306 vm_ksubmap_init(&kmi);
308 printf("avail memory = %ju (%ju MB)\n",
309 ptoa((uintmax_t)vm_cnt.v_free_count),
310 ptoa((uintmax_t)vm_cnt.v_free_count) / 1048576);
313 * Set up buffers, so they can be used to read disk labels.
316 vm_pager_bufferinit();
322 * Send an interrupt to process.
324 * Stack is set up to allow sigcode stored
325 * at top to call routine, followed by call
326 * to sigreturn routine below. After sigreturn
327 * resets the signal mask, the stack, and the
328 * frame pointer, it returns to the user
332 sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask)
334 struct sigframe sf, *sfp;
340 struct trapframe *regs;
349 PROC_LOCK_ASSERT(p, MA_OWNED);
350 sig = ksi->ksi_signo;
352 mtx_assert(&psp->ps_mtx, MA_OWNED);
354 oonstack = sigonstack(regs->tf_rsp);
356 if (cpu_max_ext_state_size > sizeof(struct savefpu) && use_xsave) {
357 xfpusave_len = cpu_max_ext_state_size - sizeof(struct savefpu);
358 xfpusave = __builtin_alloca(xfpusave_len);
364 /* Save user context. */
365 bzero(&sf, sizeof(sf));
366 sf.sf_uc.uc_sigmask = *mask;
367 sf.sf_uc.uc_stack = td->td_sigstk;
368 sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK)
369 ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE;
370 sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0;
371 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs));
372 sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */
373 get_fpcontext(td, &sf.sf_uc.uc_mcontext, xfpusave, xfpusave_len);
375 sf.sf_uc.uc_mcontext.mc_fsbase = pcb->pcb_fsbase;
376 sf.sf_uc.uc_mcontext.mc_gsbase = pcb->pcb_gsbase;
377 bzero(sf.sf_uc.uc_mcontext.mc_spare,
378 sizeof(sf.sf_uc.uc_mcontext.mc_spare));
379 bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__));
381 /* Allocate space for the signal handler context. */
382 if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack &&
383 SIGISMEMBER(psp->ps_sigonstack, sig)) {
384 sp = (char *)td->td_sigstk.ss_sp + td->td_sigstk.ss_size;
385 #if defined(COMPAT_43)
386 td->td_sigstk.ss_flags |= SS_ONSTACK;
389 sp = (char *)regs->tf_rsp - 128;
390 if (xfpusave != NULL) {
392 sp = (char *)((unsigned long)sp & ~0x3Ful);
393 sf.sf_uc.uc_mcontext.mc_xfpustate = (register_t)sp;
395 sp -= sizeof(struct sigframe);
396 /* Align to 16 bytes. */
397 sfp = (struct sigframe *)((unsigned long)sp & ~0xFul);
399 /* Build the argument list for the signal handler. */
400 regs->tf_rdi = sig; /* arg 1 in %rdi */
401 regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */
402 bzero(&sf.sf_si, sizeof(sf.sf_si));
403 if (SIGISMEMBER(psp->ps_siginfo, sig)) {
404 /* Signal handler installed with SA_SIGINFO. */
405 regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */
406 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher;
408 /* Fill in POSIX parts */
409 sf.sf_si = ksi->ksi_info;
410 sf.sf_si.si_signo = sig; /* maybe a translated signal */
411 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */
413 /* Old FreeBSD-style arguments. */
414 regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */
415 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */
416 sf.sf_ahu.sf_handler = catcher;
418 mtx_unlock(&psp->ps_mtx);
422 * Copy the sigframe out to the user's stack.
424 if (copyout(&sf, sfp, sizeof(*sfp)) != 0 ||
425 (xfpusave != NULL && copyout(xfpusave,
426 (void *)sf.sf_uc.uc_mcontext.mc_xfpustate, xfpusave_len)
429 printf("process %ld has trashed its stack\n", (long)p->p_pid);
435 regs->tf_rsp = (long)sfp;
436 regs->tf_rip = p->p_sysent->sv_sigcode_base;
437 regs->tf_rflags &= ~(PSL_T | PSL_D);
438 regs->tf_cs = _ucodesel;
439 regs->tf_ds = _udatasel;
440 regs->tf_ss = _udatasel;
441 regs->tf_es = _udatasel;
442 regs->tf_fs = _ufssel;
443 regs->tf_gs = _ugssel;
444 regs->tf_flags = TF_HASSEGS;
445 set_pcb_flags(pcb, PCB_FULL_IRET);
447 mtx_lock(&psp->ps_mtx);
451 * System call to cleanup state after a signal
452 * has been taken. Reset signal mask and
453 * stack state from context left by sendsig (above).
454 * Return to previous pc and psl as specified by
455 * context left by sendsig. Check carefully to
456 * make sure that the user has not modified the
457 * state to gain improper privileges.
462 sys_sigreturn(td, uap)
464 struct sigreturn_args /* {
465 const struct __ucontext *sigcntxp;
471 struct trapframe *regs;
474 size_t xfpustate_len;
482 error = copyin(uap->sigcntxp, &uc, sizeof(uc));
484 uprintf("pid %d (%s): sigreturn copyin failed\n",
485 p->p_pid, td->td_name);
489 if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) {
490 uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid,
491 td->td_name, ucp->uc_mcontext.mc_flags);
495 rflags = ucp->uc_mcontext.mc_rflags;
497 * Don't allow users to change privileged or reserved flags.
499 if (!EFL_SECURE(rflags, regs->tf_rflags)) {
500 uprintf("pid %d (%s): sigreturn rflags = 0x%lx\n", p->p_pid,
501 td->td_name, rflags);
506 * Don't allow users to load a valid privileged %cs. Let the
507 * hardware check for invalid selectors, excess privilege in
508 * other selectors, invalid %eip's and invalid %esp's.
510 cs = ucp->uc_mcontext.mc_cs;
511 if (!CS_SECURE(cs)) {
512 uprintf("pid %d (%s): sigreturn cs = 0x%x\n", p->p_pid,
514 ksiginfo_init_trap(&ksi);
515 ksi.ksi_signo = SIGBUS;
516 ksi.ksi_code = BUS_OBJERR;
517 ksi.ksi_trapno = T_PROTFLT;
518 ksi.ksi_addr = (void *)regs->tf_rip;
519 trapsignal(td, &ksi);
523 if ((uc.uc_mcontext.mc_flags & _MC_HASFPXSTATE) != 0) {
524 xfpustate_len = uc.uc_mcontext.mc_xfpustate_len;
525 if (xfpustate_len > cpu_max_ext_state_size -
526 sizeof(struct savefpu)) {
527 uprintf("pid %d (%s): sigreturn xfpusave_len = 0x%zx\n",
528 p->p_pid, td->td_name, xfpustate_len);
531 xfpustate = __builtin_alloca(xfpustate_len);
532 error = copyin((const void *)uc.uc_mcontext.mc_xfpustate,
533 xfpustate, xfpustate_len);
536 "pid %d (%s): sigreturn copying xfpustate failed\n",
537 p->p_pid, td->td_name);
544 ret = set_fpcontext(td, &ucp->uc_mcontext, xfpustate, xfpustate_len);
546 uprintf("pid %d (%s): sigreturn set_fpcontext err %d\n",
547 p->p_pid, td->td_name, ret);
550 bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs));
551 pcb->pcb_fsbase = ucp->uc_mcontext.mc_fsbase;
552 pcb->pcb_gsbase = ucp->uc_mcontext.mc_gsbase;
554 #if defined(COMPAT_43)
555 if (ucp->uc_mcontext.mc_onstack & 1)
556 td->td_sigstk.ss_flags |= SS_ONSTACK;
558 td->td_sigstk.ss_flags &= ~SS_ONSTACK;
561 kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0);
562 set_pcb_flags(pcb, PCB_FULL_IRET);
563 return (EJUSTRETURN);
566 #ifdef COMPAT_FREEBSD4
568 freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap)
571 return sys_sigreturn(td, (struct sigreturn_args *)uap);
576 * Reset registers to default values on exec.
579 exec_setregs(struct thread *td, struct image_params *imgp, u_long stack)
581 struct trapframe *regs = td->td_frame;
582 struct pcb *pcb = td->td_pcb;
585 if (td->td_proc->p_md.md_ldt != NULL)
588 mtx_unlock(&dt_lock);
592 clear_pcb_flags(pcb, PCB_32BIT);
593 pcb->pcb_initial_fpucw = __INITIAL_FPUCW__;
594 set_pcb_flags(pcb, PCB_FULL_IRET);
596 bzero((char *)regs, sizeof(struct trapframe));
597 regs->tf_rip = imgp->entry_addr;
598 regs->tf_rsp = ((stack - 8) & ~0xFul) + 8;
599 regs->tf_rdi = stack; /* argv */
600 regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T);
601 regs->tf_ss = _udatasel;
602 regs->tf_cs = _ucodesel;
603 regs->tf_ds = _udatasel;
604 regs->tf_es = _udatasel;
605 regs->tf_fs = _ufssel;
606 regs->tf_gs = _ugssel;
607 regs->tf_flags = TF_HASSEGS;
608 td->td_retval[1] = 0;
611 * Reset the hardware debug registers if they were in use.
612 * They won't have any meaning for the newly exec'd process.
614 if (pcb->pcb_flags & PCB_DBREGS) {
623 * Clear the debug registers on the running
624 * CPU, otherwise they will end up affecting
625 * the next process we switch to.
629 clear_pcb_flags(pcb, PCB_DBREGS);
633 * Drop the FP state if we hold it, so that the process gets a
634 * clean FP state if it uses the FPU again.
646 * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the
647 * BSP. See the comments there about why we set them.
649 cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM;
654 * Initialize amd64 and configure to run kernel
658 * Initialize segments & interrupt table
661 struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor tables */
662 static struct gate_descriptor idt0[NIDT];
663 struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */
665 static char dblfault_stack[PAGE_SIZE] __aligned(16);
667 static char nmi0_stack[PAGE_SIZE] __aligned(16);
668 CTASSERT(sizeof(struct nmi_pcpu) == 16);
670 struct amd64tss common_tss[MAXCPU];
673 * Software prototypes -- in more palatable form.
675 * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same
676 * slots as corresponding segments for i386 kernel.
678 struct soft_segment_descriptor gdt_segs[] = {
679 /* GNULL_SEL 0 Null Descriptor */
688 /* GNULL2_SEL 1 Null Descriptor */
697 /* GUFS32_SEL 2 32 bit %gs Descriptor for user */
699 .ssd_limit = 0xfffff,
700 .ssd_type = SDT_MEMRWA,
706 /* GUGS32_SEL 3 32 bit %fs Descriptor for user */
708 .ssd_limit = 0xfffff,
709 .ssd_type = SDT_MEMRWA,
715 /* GCODE_SEL 4 Code Descriptor for kernel */
717 .ssd_limit = 0xfffff,
718 .ssd_type = SDT_MEMERA,
724 /* GDATA_SEL 5 Data Descriptor for kernel */
726 .ssd_limit = 0xfffff,
727 .ssd_type = SDT_MEMRWA,
733 /* GUCODE32_SEL 6 32 bit Code Descriptor for user */
735 .ssd_limit = 0xfffff,
736 .ssd_type = SDT_MEMERA,
742 /* GUDATA_SEL 7 32/64 bit Data Descriptor for user */
744 .ssd_limit = 0xfffff,
745 .ssd_type = SDT_MEMRWA,
751 /* GUCODE_SEL 8 64 bit Code Descriptor for user */
753 .ssd_limit = 0xfffff,
754 .ssd_type = SDT_MEMERA,
760 /* GPROC0_SEL 9 Proc 0 Tss Descriptor */
762 .ssd_limit = sizeof(struct amd64tss) + IOPERM_BITMAP_SIZE - 1,
763 .ssd_type = SDT_SYSTSS,
769 /* Actually, the TSS is a system descriptor which is double size */
778 /* GUSERLDT_SEL 11 LDT Descriptor */
787 /* GUSERLDT_SEL 12 LDT Descriptor, double size */
799 setidt(int idx, inthand_t *func, int typ, int dpl, int ist)
801 struct gate_descriptor *ip;
804 ip->gd_looffset = (uintptr_t)func;
805 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL);
811 ip->gd_hioffset = ((uintptr_t)func)>>16 ;
815 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl),
816 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm),
817 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot),
818 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align),
819 IDTVEC(xmm), IDTVEC(dblfault),
824 IDTVEC(xen_intr_upcall),
826 IDTVEC(fast_syscall), IDTVEC(fast_syscall32);
830 * Display the index and function name of any IDT entries that don't use
831 * the default 'rsvd' entry point.
833 DB_SHOW_COMMAND(idt, db_show_idt)
835 struct gate_descriptor *ip;
840 for (idx = 0; idx < NIDT && !db_pager_quit; idx++) {
841 func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset);
842 if (func != (uintptr_t)&IDTVEC(rsvd)) {
843 db_printf("%3d\t", idx);
844 db_printsym(func, DB_STGY_PROC);
851 /* Show privileged registers. */
852 DB_SHOW_COMMAND(sysregs, db_show_sysregs)
857 } __packed idtr, gdtr;
860 __asm __volatile("sidt %0" : "=m" (idtr));
861 db_printf("idtr\t0x%016lx/%04x\n",
862 (u_long)idtr.base, (u_int)idtr.limit);
863 __asm __volatile("sgdt %0" : "=m" (gdtr));
864 db_printf("gdtr\t0x%016lx/%04x\n",
865 (u_long)gdtr.base, (u_int)gdtr.limit);
866 __asm __volatile("sldt %0" : "=r" (ldt));
867 db_printf("ldtr\t0x%04x\n", ldt);
868 __asm __volatile("str %0" : "=r" (tr));
869 db_printf("tr\t0x%04x\n", tr);
870 db_printf("cr0\t0x%016lx\n", rcr0());
871 db_printf("cr2\t0x%016lx\n", rcr2());
872 db_printf("cr3\t0x%016lx\n", rcr3());
873 db_printf("cr4\t0x%016lx\n", rcr4());
874 if (rcr4() & CR4_XSAVE)
875 db_printf("xcr0\t0x%016lx\n", rxcr(0));
876 db_printf("EFER\t0x%016lx\n", rdmsr(MSR_EFER));
877 if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX))
878 db_printf("FEATURES_CTL\t%016lx\n",
879 rdmsr(MSR_IA32_FEATURE_CONTROL));
880 db_printf("DEBUG_CTL\t0x%016lx\n", rdmsr(MSR_DEBUGCTLMSR));
881 db_printf("PAT\t0x%016lx\n", rdmsr(MSR_PAT));
882 db_printf("GSBASE\t0x%016lx\n", rdmsr(MSR_GSBASE));
885 DB_SHOW_COMMAND(dbregs, db_show_dbregs)
888 db_printf("dr0\t0x%016lx\n", rdr0());
889 db_printf("dr1\t0x%016lx\n", rdr1());
890 db_printf("dr2\t0x%016lx\n", rdr2());
891 db_printf("dr3\t0x%016lx\n", rdr3());
892 db_printf("dr6\t0x%016lx\n", rdr6());
893 db_printf("dr7\t0x%016lx\n", rdr7());
899 struct user_segment_descriptor *sd;
900 struct soft_segment_descriptor *ssd;
903 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase;
904 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit;
905 ssd->ssd_type = sd->sd_type;
906 ssd->ssd_dpl = sd->sd_dpl;
907 ssd->ssd_p = sd->sd_p;
908 ssd->ssd_long = sd->sd_long;
909 ssd->ssd_def32 = sd->sd_def32;
910 ssd->ssd_gran = sd->sd_gran;
915 struct soft_segment_descriptor *ssd;
916 struct user_segment_descriptor *sd;
919 sd->sd_lobase = (ssd->ssd_base) & 0xffffff;
920 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff;
921 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff;
922 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf;
923 sd->sd_type = ssd->ssd_type;
924 sd->sd_dpl = ssd->ssd_dpl;
925 sd->sd_p = ssd->ssd_p;
926 sd->sd_long = ssd->ssd_long;
927 sd->sd_def32 = ssd->ssd_def32;
928 sd->sd_gran = ssd->ssd_gran;
933 struct soft_segment_descriptor *ssd;
934 struct system_segment_descriptor *sd;
937 sd->sd_lobase = (ssd->ssd_base) & 0xffffff;
938 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful;
939 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff;
940 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf;
941 sd->sd_type = ssd->ssd_type;
942 sd->sd_dpl = ssd->ssd_dpl;
943 sd->sd_p = ssd->ssd_p;
944 sd->sd_gran = ssd->ssd_gran;
947 #if !defined(DEV_ATPIC) && defined(DEV_ISA)
948 #include <isa/isavar.h>
949 #include <isa/isareg.h>
951 * Return a bitmap of the current interrupt requests. This is 8259-specific
952 * and is only suitable for use at probe time.
953 * This is only here to pacify sio. It is NOT FATAL if this doesn't work.
954 * It shouldn't be here. There should probably be an APIC centric
955 * implementation in the apic driver code, if at all.
958 isa_irq_pending(void)
965 return ((irr2 << 8) | irr1);
972 add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap,
975 int i, insert_idx, physmap_idx;
977 physmap_idx = *physmap_idxp;
983 * Find insertion point while checking for overlap. Start off by
984 * assuming the new entry will be added to the end.
986 * NB: physmap_idx points to the next free slot.
988 insert_idx = physmap_idx;
989 for (i = 0; i <= physmap_idx; i += 2) {
990 if (base < physmap[i + 1]) {
991 if (base + length <= physmap[i]) {
995 if (boothowto & RB_VERBOSE)
997 "Overlapping memory regions, ignoring second region\n");
1002 /* See if we can prepend to the next entry. */
1003 if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) {
1004 physmap[insert_idx] = base;
1008 /* See if we can append to the previous entry. */
1009 if (insert_idx > 0 && base == physmap[insert_idx - 1]) {
1010 physmap[insert_idx - 1] += length;
1015 *physmap_idxp = physmap_idx;
1016 if (physmap_idx == PHYSMAP_SIZE) {
1018 "Too many segments in the physical address map, giving up\n");
1023 * Move the last 'N' entries down to make room for the new
1026 for (i = (physmap_idx - 2); i > insert_idx; i -= 2) {
1027 physmap[i] = physmap[i - 2];
1028 physmap[i + 1] = physmap[i - 1];
1031 /* Insert the new entry. */
1032 physmap[insert_idx] = base;
1033 physmap[insert_idx + 1] = base + length;
1038 bios_add_smap_entries(struct bios_smap *smapbase, u_int32_t smapsize,
1039 vm_paddr_t *physmap, int *physmap_idx)
1041 struct bios_smap *smap, *smapend;
1043 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize);
1045 for (smap = smapbase; smap < smapend; smap++) {
1046 if (boothowto & RB_VERBOSE)
1047 printf("SMAP type=%02x base=%016lx len=%016lx\n",
1048 smap->type, smap->base, smap->length);
1050 if (smap->type != SMAP_TYPE_MEMORY)
1053 if (!add_physmap_entry(smap->base, smap->length, physmap,
1060 add_efi_map_entries(struct efi_map_header *efihdr, vm_paddr_t *physmap,
1063 struct efi_md *map, *p;
1068 static const char *types[] = {
1074 "RuntimeServicesCode",
1075 "RuntimeServicesData",
1076 "ConventionalMemory",
1078 "ACPIReclaimMemory",
1081 "MemoryMappedIOPortSpace",
1087 * Memory map data provided by UEFI via the GetMemoryMap
1088 * Boot Services API.
1090 efisz = (sizeof(struct efi_map_header) + 0xf) & ~0xf;
1091 map = (struct efi_md *)((uint8_t *)efihdr + efisz);
1093 if (efihdr->descriptor_size == 0)
1095 ndesc = efihdr->memory_size / efihdr->descriptor_size;
1097 if (boothowto & RB_VERBOSE)
1098 printf("%23s %12s %12s %8s %4s\n",
1099 "Type", "Physical", "Virtual", "#Pages", "Attr");
1101 for (i = 0, p = map; i < ndesc; i++,
1102 p = efi_next_descriptor(p, efihdr->descriptor_size)) {
1103 if (boothowto & RB_VERBOSE) {
1104 if (p->md_type < nitems(types))
1105 type = types[p->md_type];
1108 printf("%23s %012lx %12p %08lx ", type, p->md_phys,
1109 p->md_virt, p->md_pages);
1110 if (p->md_attr & EFI_MD_ATTR_UC)
1112 if (p->md_attr & EFI_MD_ATTR_WC)
1114 if (p->md_attr & EFI_MD_ATTR_WT)
1116 if (p->md_attr & EFI_MD_ATTR_WB)
1118 if (p->md_attr & EFI_MD_ATTR_UCE)
1120 if (p->md_attr & EFI_MD_ATTR_WP)
1122 if (p->md_attr & EFI_MD_ATTR_RP)
1124 if (p->md_attr & EFI_MD_ATTR_XP)
1126 if (p->md_attr & EFI_MD_ATTR_NV)
1128 if (p->md_attr & EFI_MD_ATTR_MORE_RELIABLE)
1129 printf("MORE_RELIABLE ");
1130 if (p->md_attr & EFI_MD_ATTR_RO)
1132 if (p->md_attr & EFI_MD_ATTR_RT)
1137 switch (p->md_type) {
1138 case EFI_MD_TYPE_CODE:
1139 case EFI_MD_TYPE_DATA:
1140 case EFI_MD_TYPE_BS_CODE:
1141 case EFI_MD_TYPE_BS_DATA:
1142 case EFI_MD_TYPE_FREE:
1144 * We're allowed to use any entry with these types.
1151 if (!add_physmap_entry(p->md_phys, (p->md_pages * PAGE_SIZE),
1152 physmap, physmap_idx))
1157 static char bootmethod[16] = "";
1158 SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0,
1159 "System firmware boot method");
1162 native_parse_memmap(caddr_t kmdp, vm_paddr_t *physmap, int *physmap_idx)
1164 struct bios_smap *smap;
1165 struct efi_map_header *efihdr;
1169 * Memory map from INT 15:E820.
1171 * subr_module.c says:
1172 * "Consumer may safely assume that size value precedes data."
1173 * ie: an int32_t immediately precedes smap.
1176 efihdr = (struct efi_map_header *)preload_search_info(kmdp,
1177 MODINFO_METADATA | MODINFOMD_EFI_MAP);
1178 smap = (struct bios_smap *)preload_search_info(kmdp,
1179 MODINFO_METADATA | MODINFOMD_SMAP);
1180 if (efihdr == NULL && smap == NULL)
1181 panic("No BIOS smap or EFI map info from loader!");
1183 if (efihdr != NULL) {
1184 add_efi_map_entries(efihdr, physmap, physmap_idx);
1185 strlcpy(bootmethod, "UEFI", sizeof(bootmethod));
1187 size = *((u_int32_t *)smap - 1);
1188 bios_add_smap_entries(smap, size, physmap, physmap_idx);
1189 strlcpy(bootmethod, "BIOS", sizeof(bootmethod));
1193 #define PAGES_PER_GB (1024 * 1024 * 1024 / PAGE_SIZE)
1196 * Populate the (physmap) array with base/bound pairs describing the
1197 * available physical memory in the system, then test this memory and
1198 * build the phys_avail array describing the actually-available memory.
1200 * Total memory size may be set by the kernel environment variable
1201 * hw.physmem or the compile-time define MAXMEM.
1203 * XXX first should be vm_paddr_t.
1206 getmemsize(caddr_t kmdp, u_int64_t first)
1208 int i, physmap_idx, pa_indx, da_indx;
1209 vm_paddr_t pa, physmap[PHYSMAP_SIZE];
1210 u_long physmem_start, physmem_tunable, memtest;
1212 quad_t dcons_addr, dcons_size;
1215 bzero(physmap, sizeof(physmap));
1218 init_ops.parse_memmap(kmdp, physmap, &physmap_idx);
1222 * Find the 'base memory' segment for SMP
1225 for (i = 0; i <= physmap_idx; i += 2) {
1226 if (physmap[i] <= 0xA0000) {
1227 basemem = physmap[i + 1] / 1024;
1231 if (basemem == 0 || basemem > 640) {
1234 "Memory map doesn't contain a basemem segment, faking it");
1239 * Make hole for "AP -> long mode" bootstrap code. The
1240 * mp_bootaddress vector is only available when the kernel
1241 * is configured to support APs and APs for the system start
1242 * in 32bit mode (e.g. SMP bare metal).
1244 if (init_ops.mp_bootaddress) {
1245 if (physmap[1] >= 0x100000000)
1247 "Basemem segment is not suitable for AP bootstrap code!");
1248 physmap[1] = init_ops.mp_bootaddress(physmap[1] / 1024);
1252 * Maxmem isn't the "maximum memory", it's one larger than the
1253 * highest page of the physical address space. It should be
1254 * called something like "Maxphyspage". We may adjust this
1255 * based on ``hw.physmem'' and the results of the memory test.
1257 Maxmem = atop(physmap[physmap_idx + 1]);
1260 Maxmem = MAXMEM / 4;
1263 if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable))
1264 Maxmem = atop(physmem_tunable);
1267 * The boot memory test is disabled by default, as it takes a
1268 * significant amount of time on large-memory systems, and is
1269 * unfriendly to virtual machines as it unnecessarily touches all
1272 * A general name is used as the code may be extended to support
1273 * additional tests beyond the current "page present" test.
1276 TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest);
1279 * Don't allow MAXMEM or hw.physmem to extend the amount of memory
1282 if (Maxmem > atop(physmap[physmap_idx + 1]))
1283 Maxmem = atop(physmap[physmap_idx + 1]);
1285 if (atop(physmap[physmap_idx + 1]) != Maxmem &&
1286 (boothowto & RB_VERBOSE))
1287 printf("Physical memory use set to %ldK\n", Maxmem * 4);
1289 /* call pmap initialization to make new kernel address space */
1290 pmap_bootstrap(&first);
1293 * Size up each available chunk of physical memory.
1295 * XXX Some BIOSes corrupt low 64KB between suspend and resume.
1296 * By default, mask off the first 16 pages unless we appear to be
1299 physmem_start = (vm_guest > VM_GUEST_NO ? 1 : 16) << PAGE_SHIFT;
1300 TUNABLE_ULONG_FETCH("hw.physmem.start", &physmem_start);
1301 if (physmap[0] < physmem_start) {
1302 if (physmem_start < PAGE_SIZE)
1303 physmap[0] = PAGE_SIZE;
1304 else if (physmem_start >= physmap[1])
1305 physmap[0] = round_page(physmap[1] - PAGE_SIZE);
1307 physmap[0] = round_page(physmem_start);
1311 phys_avail[pa_indx++] = physmap[0];
1312 phys_avail[pa_indx] = physmap[0];
1313 dump_avail[da_indx] = physmap[0];
1317 * Get dcons buffer address
1319 if (getenv_quad("dcons.addr", &dcons_addr) == 0 ||
1320 getenv_quad("dcons.size", &dcons_size) == 0)
1324 * physmap is in bytes, so when converting to page boundaries,
1325 * round up the start address and round down the end address.
1329 printf("Testing system memory");
1330 for (i = 0; i <= physmap_idx; i += 2) {
1333 end = ptoa((vm_paddr_t)Maxmem);
1334 if (physmap[i + 1] < end)
1335 end = trunc_page(physmap[i + 1]);
1336 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) {
1337 int tmp, page_bad, full;
1338 int *ptr = (int *)CADDR1;
1342 * block out kernel memory as not available.
1344 if (pa >= (vm_paddr_t)kernphys && pa < first)
1348 * block out dcons buffer
1351 && pa >= trunc_page(dcons_addr)
1352 && pa < dcons_addr + dcons_size)
1360 * Print a "." every GB to show we're making
1364 if ((page_counter % PAGES_PER_GB) == 0)
1368 * map page into kernel: valid, read/write,non-cacheable
1370 *pte = pa | PG_V | PG_RW | PG_NC_PWT | PG_NC_PCD;
1375 * Test for alternating 1's and 0's
1377 *(volatile int *)ptr = 0xaaaaaaaa;
1378 if (*(volatile int *)ptr != 0xaaaaaaaa)
1381 * Test for alternating 0's and 1's
1383 *(volatile int *)ptr = 0x55555555;
1384 if (*(volatile int *)ptr != 0x55555555)
1389 *(volatile int *)ptr = 0xffffffff;
1390 if (*(volatile int *)ptr != 0xffffffff)
1395 *(volatile int *)ptr = 0x0;
1396 if (*(volatile int *)ptr != 0x0)
1399 * Restore original value.
1405 * Adjust array of valid/good pages.
1407 if (page_bad == TRUE)
1410 * If this good page is a continuation of the
1411 * previous set of good pages, then just increase
1412 * the end pointer. Otherwise start a new chunk.
1413 * Note that "end" points one higher than end,
1414 * making the range >= start and < end.
1415 * If we're also doing a speculative memory
1416 * test and we at or past the end, bump up Maxmem
1417 * so that we keep going. The first bad page
1418 * will terminate the loop.
1420 if (phys_avail[pa_indx] == pa) {
1421 phys_avail[pa_indx] += PAGE_SIZE;
1424 if (pa_indx == PHYS_AVAIL_ARRAY_END) {
1426 "Too many holes in the physical address space, giving up\n");
1431 phys_avail[pa_indx++] = pa; /* start */
1432 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */
1436 if (dump_avail[da_indx] == pa) {
1437 dump_avail[da_indx] += PAGE_SIZE;
1440 if (da_indx == DUMP_AVAIL_ARRAY_END) {
1444 dump_avail[da_indx++] = pa; /* start */
1445 dump_avail[da_indx] = pa + PAGE_SIZE; /* end */
1459 * The last chunk must contain at least one page plus the message
1460 * buffer to avoid complicating other code (message buffer address
1461 * calculation, etc.).
1463 while (phys_avail[pa_indx - 1] + PAGE_SIZE +
1464 round_page(msgbufsize) >= phys_avail[pa_indx]) {
1465 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]);
1466 phys_avail[pa_indx--] = 0;
1467 phys_avail[pa_indx--] = 0;
1470 Maxmem = atop(phys_avail[pa_indx]);
1472 /* Trim off space for the message buffer. */
1473 phys_avail[pa_indx] -= round_page(msgbufsize);
1475 /* Map the message buffer. */
1476 msgbufp = (struct msgbuf *)PHYS_TO_DMAP(phys_avail[pa_indx]);
1480 native_parse_preload_data(u_int64_t modulep)
1485 vm_offset_t ksym_start;
1486 vm_offset_t ksym_end;
1489 preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE);
1490 preload_bootstrap_relocate(KERNBASE);
1491 kmdp = preload_search_by_type("elf kernel");
1493 kmdp = preload_search_by_type("elf64 kernel");
1494 boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int);
1495 envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *);
1498 init_static_kenv(envp, 0);
1500 ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t);
1501 ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t);
1502 db_fetch_ksymtab(ksym_start, ksym_end);
1504 efi_systbl_phys = MD_FETCH(kmdp, MODINFOMD_FW_HANDLE, vm_paddr_t);
1510 amd64_kdb_init(void)
1514 if (boothowto & RB_KDB)
1515 kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
1520 hammer_time(u_int64_t modulep, u_int64_t physfree)
1525 struct nmi_pcpu *np;
1526 struct xstate_hdr *xhdr;
1533 * This may be done better later if it gets more high level
1534 * components in it. If so just link td->td_proc here.
1536 proc_linkup0(&proc0, &thread0);
1538 kmdp = init_ops.parse_preload_data(modulep);
1540 identify_hypervisor();
1542 /* Init basic tunables, hz etc */
1545 thread0.td_kstack = physfree + KERNBASE;
1546 thread0.td_kstack_pages = kstack_pages;
1547 kstack0_sz = thread0.td_kstack_pages * PAGE_SIZE;
1548 bzero((void *)thread0.td_kstack, kstack0_sz);
1549 physfree += kstack0_sz;
1552 * make gdt memory segments
1554 for (x = 0; x < NGDT; x++) {
1555 if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) &&
1556 x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1)
1557 ssdtosd(&gdt_segs[x], &gdt[x]);
1559 gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0];
1560 ssdtosyssd(&gdt_segs[GPROC0_SEL],
1561 (struct system_segment_descriptor *)&gdt[GPROC0_SEL]);
1563 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
1564 r_gdt.rd_base = (long) gdt;
1568 wrmsr(MSR_FSBASE, 0); /* User value */
1569 wrmsr(MSR_GSBASE, (u_int64_t)pc);
1570 wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */
1572 pcpu_init(pc, 0, sizeof(struct pcpu));
1573 dpcpu_init((void *)(physfree + KERNBASE), 0);
1574 physfree += DPCPU_SIZE;
1575 PCPU_SET(prvspace, pc);
1576 PCPU_SET(curthread, &thread0);
1577 /* Non-late cninit() and printf() can be moved up to here. */
1578 PCPU_SET(tssp, &common_tss[0]);
1579 PCPU_SET(commontssp, &common_tss[0]);
1580 PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]);
1581 PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]);
1582 PCPU_SET(fs32p, &gdt[GUFS32_SEL]);
1583 PCPU_SET(gs32p, &gdt[GUGS32_SEL]);
1586 * Initialize mutexes.
1588 * icu_lock: in order to allow an interrupt to occur in a critical
1589 * section, to set pcpu->ipending (etc...) properly, we
1590 * must be able to get the icu lock, so it can't be
1594 mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS);
1595 mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF);
1598 for (x = 0; x < NIDT; x++)
1599 setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0);
1600 setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0);
1601 setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0);
1602 setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2);
1603 setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0);
1604 setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0);
1605 setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0);
1606 setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0);
1607 setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0);
1608 setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1);
1609 setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0);
1610 setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0);
1611 setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0);
1612 setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0);
1613 setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0);
1614 setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0);
1615 setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0);
1616 setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0);
1617 setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0);
1618 setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0);
1619 #ifdef KDTRACE_HOOKS
1620 setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYSIGT, SEL_UPL, 0);
1623 setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYSIGT, SEL_UPL, 0);
1626 r_idt.rd_limit = sizeof(idt0) - 1;
1627 r_idt.rd_base = (long) idt;
1631 * Initialize the clock before the console so that console
1632 * initialization can use DELAY().
1637 * Use vt(4) by default for UEFI boot (during the sc(4)/vt(4)
1639 * Once bootblocks have updated, we can test directly for
1640 * efi_systbl != NULL here...
1642 if (preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP)
1644 vty_set_preferred(VTY_VT);
1646 identify_cpu(); /* Final stage of CPU initialization */
1647 initializecpu(); /* Initialize CPU registers */
1648 initializecpucache();
1650 /* doublefault stack space, runs on ist1 */
1651 common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)];
1654 * NMI stack, runs on ist2. The pcpu pointer is stored just
1655 * above the start of the ist2 stack.
1657 np = ((struct nmi_pcpu *) &nmi0_stack[sizeof(nmi0_stack)]) - 1;
1658 np->np_pcpu = (register_t) pc;
1659 common_tss[0].tss_ist2 = (long) np;
1661 /* Set the IO permission bitmap (empty due to tss seg limit) */
1662 common_tss[0].tss_iobase = sizeof(struct amd64tss) + IOPERM_BITMAP_SIZE;
1664 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
1667 /* Set up the fast syscall stuff */
1668 msr = rdmsr(MSR_EFER) | EFER_SCE;
1669 wrmsr(MSR_EFER, msr);
1670 wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall));
1671 wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32));
1672 msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) |
1673 ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48);
1674 wrmsr(MSR_STAR, msr);
1675 wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D);
1678 * Temporary forge some valid pointer to PCB, for exception
1679 * handlers. It is reinitialized properly below after FPU is
1680 * set up. Also set up td_critnest to short-cut the page
1683 cpu_max_ext_state_size = sizeof(struct savefpu);
1684 thread0.td_pcb = get_pcb_td(&thread0);
1685 thread0.td_critnest = 1;
1688 * The console and kdb should be initialized even earlier than here,
1689 * but some console drivers don't work until after getmemsize().
1690 * Default to late console initialization to support these drivers.
1691 * This loses mainly printf()s in getmemsize() and early debugging.
1694 TUNABLE_INT_FETCH("debug.late_console", &late_console);
1695 if (!late_console) {
1700 getmemsize(kmdp, physfree);
1701 init_param2(physmem);
1703 /* now running on new page tables, configured,and u/iom is accessible */
1713 /* Reset and mask the atpics and leave them shut down. */
1717 * Point the ICU spurious interrupt vectors at the APIC spurious
1718 * interrupt handler.
1720 setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0);
1721 setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0);
1724 #error "have you forgotten the isa device?";
1730 msgbufinit(msgbufp, msgbufsize);
1734 * Set up thread0 pcb after fpuinit calculated pcb + fpu save
1735 * area size. Zero out the extended state header in fpu save
1738 thread0.td_pcb = get_pcb_td(&thread0);
1739 thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0);
1740 bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size);
1742 xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) +
1744 xhdr->xstate_bv = xsave_mask;
1746 /* make an initial tss so cpu can get interrupt stack on syscall! */
1747 common_tss[0].tss_rsp0 = (vm_offset_t)thread0.td_pcb;
1748 /* Ensure the stack is aligned to 16 bytes */
1749 common_tss[0].tss_rsp0 &= ~0xFul;
1750 PCPU_SET(rsp0, common_tss[0].tss_rsp0);
1751 PCPU_SET(curpcb, thread0.td_pcb);
1753 /* transfer to user mode */
1755 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL);
1756 _udatasel = GSEL(GUDATA_SEL, SEL_UPL);
1757 _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL);
1758 _ufssel = GSEL(GUFS32_SEL, SEL_UPL);
1759 _ugssel = GSEL(GUGS32_SEL, SEL_UPL);
1765 /* setup proc 0's pcb */
1766 thread0.td_pcb->pcb_flags = 0;
1767 thread0.td_frame = &proc0_tf;
1769 env = kern_getenv("kernelname");
1771 strlcpy(kernelname, env, sizeof(kernelname));
1778 thread0.td_critnest = 0;
1780 /* Location of kernel stack for locore */
1781 return ((u_int64_t)thread0.td_pcb);
1785 cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size)
1788 pcpu->pc_acpi_id = 0xffffffff;
1792 smap_sysctl_handler(SYSCTL_HANDLER_ARGS)
1794 struct bios_smap *smapbase;
1795 struct bios_smap_xattr smap;
1798 int count, error, i;
1800 /* Retrieve the system memory map from the loader. */
1801 kmdp = preload_search_by_type("elf kernel");
1803 kmdp = preload_search_by_type("elf64 kernel");
1804 smapbase = (struct bios_smap *)preload_search_info(kmdp,
1805 MODINFO_METADATA | MODINFOMD_SMAP);
1806 if (smapbase == NULL)
1808 smapattr = (uint32_t *)preload_search_info(kmdp,
1809 MODINFO_METADATA | MODINFOMD_SMAP_XATTR);
1810 count = *((uint32_t *)smapbase - 1) / sizeof(*smapbase);
1812 for (i = 0; i < count; i++) {
1813 smap.base = smapbase[i].base;
1814 smap.length = smapbase[i].length;
1815 smap.type = smapbase[i].type;
1816 if (smapattr != NULL)
1817 smap.xattr = smapattr[i];
1820 error = SYSCTL_OUT(req, &smap, sizeof(smap));
1824 SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0,
1825 smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data");
1828 efi_map_sysctl_handler(SYSCTL_HANDLER_ARGS)
1830 struct efi_map_header *efihdr;
1834 kmdp = preload_search_by_type("elf kernel");
1836 kmdp = preload_search_by_type("elf64 kernel");
1837 efihdr = (struct efi_map_header *)preload_search_info(kmdp,
1838 MODINFO_METADATA | MODINFOMD_EFI_MAP);
1841 efisize = *((uint32_t *)efihdr - 1);
1842 return (SYSCTL_OUT(req, efihdr, efisize));
1844 SYSCTL_PROC(_machdep, OID_AUTO, efi_map, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0,
1845 efi_map_sysctl_handler, "S,efi_map_header", "Raw EFI Memory Map");
1848 spinlock_enter(void)
1854 if (td->td_md.md_spinlock_count == 0) {
1855 flags = intr_disable();
1856 td->td_md.md_spinlock_count = 1;
1857 td->td_md.md_saved_flags = flags;
1859 td->td_md.md_spinlock_count++;
1871 flags = td->td_md.md_saved_flags;
1872 td->td_md.md_spinlock_count--;
1873 if (td->td_md.md_spinlock_count == 0)
1874 intr_restore(flags);
1878 * Construct a PCB from a trapframe. This is called from kdb_trap() where
1879 * we want to start a backtrace from the function that caused us to enter
1880 * the debugger. We have the context in the trapframe, but base the trace
1881 * on the PCB. The PCB doesn't have to be perfect, as long as it contains
1882 * enough for a backtrace.
1885 makectx(struct trapframe *tf, struct pcb *pcb)
1888 pcb->pcb_r12 = tf->tf_r12;
1889 pcb->pcb_r13 = tf->tf_r13;
1890 pcb->pcb_r14 = tf->tf_r14;
1891 pcb->pcb_r15 = tf->tf_r15;
1892 pcb->pcb_rbp = tf->tf_rbp;
1893 pcb->pcb_rbx = tf->tf_rbx;
1894 pcb->pcb_rip = tf->tf_rip;
1895 pcb->pcb_rsp = tf->tf_rsp;
1899 ptrace_set_pc(struct thread *td, unsigned long addr)
1902 td->td_frame->tf_rip = addr;
1903 set_pcb_flags(td->td_pcb, PCB_FULL_IRET);
1908 ptrace_single_step(struct thread *td)
1910 td->td_frame->tf_rflags |= PSL_T;
1915 ptrace_clear_single_step(struct thread *td)
1917 td->td_frame->tf_rflags &= ~PSL_T;
1922 fill_regs(struct thread *td, struct reg *regs)
1924 struct trapframe *tp;
1927 return (fill_frame_regs(tp, regs));
1931 fill_frame_regs(struct trapframe *tp, struct reg *regs)
1933 regs->r_r15 = tp->tf_r15;
1934 regs->r_r14 = tp->tf_r14;
1935 regs->r_r13 = tp->tf_r13;
1936 regs->r_r12 = tp->tf_r12;
1937 regs->r_r11 = tp->tf_r11;
1938 regs->r_r10 = tp->tf_r10;
1939 regs->r_r9 = tp->tf_r9;
1940 regs->r_r8 = tp->tf_r8;
1941 regs->r_rdi = tp->tf_rdi;
1942 regs->r_rsi = tp->tf_rsi;
1943 regs->r_rbp = tp->tf_rbp;
1944 regs->r_rbx = tp->tf_rbx;
1945 regs->r_rdx = tp->tf_rdx;
1946 regs->r_rcx = tp->tf_rcx;
1947 regs->r_rax = tp->tf_rax;
1948 regs->r_rip = tp->tf_rip;
1949 regs->r_cs = tp->tf_cs;
1950 regs->r_rflags = tp->tf_rflags;
1951 regs->r_rsp = tp->tf_rsp;
1952 regs->r_ss = tp->tf_ss;
1953 if (tp->tf_flags & TF_HASSEGS) {
1954 regs->r_ds = tp->tf_ds;
1955 regs->r_es = tp->tf_es;
1956 regs->r_fs = tp->tf_fs;
1957 regs->r_gs = tp->tf_gs;
1968 set_regs(struct thread *td, struct reg *regs)
1970 struct trapframe *tp;
1974 rflags = regs->r_rflags & 0xffffffff;
1975 if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs))
1977 tp->tf_r15 = regs->r_r15;
1978 tp->tf_r14 = regs->r_r14;
1979 tp->tf_r13 = regs->r_r13;
1980 tp->tf_r12 = regs->r_r12;
1981 tp->tf_r11 = regs->r_r11;
1982 tp->tf_r10 = regs->r_r10;
1983 tp->tf_r9 = regs->r_r9;
1984 tp->tf_r8 = regs->r_r8;
1985 tp->tf_rdi = regs->r_rdi;
1986 tp->tf_rsi = regs->r_rsi;
1987 tp->tf_rbp = regs->r_rbp;
1988 tp->tf_rbx = regs->r_rbx;
1989 tp->tf_rdx = regs->r_rdx;
1990 tp->tf_rcx = regs->r_rcx;
1991 tp->tf_rax = regs->r_rax;
1992 tp->tf_rip = regs->r_rip;
1993 tp->tf_cs = regs->r_cs;
1994 tp->tf_rflags = rflags;
1995 tp->tf_rsp = regs->r_rsp;
1996 tp->tf_ss = regs->r_ss;
1997 if (0) { /* XXXKIB */
1998 tp->tf_ds = regs->r_ds;
1999 tp->tf_es = regs->r_es;
2000 tp->tf_fs = regs->r_fs;
2001 tp->tf_gs = regs->r_gs;
2002 tp->tf_flags = TF_HASSEGS;
2004 set_pcb_flags(td->td_pcb, PCB_FULL_IRET);
2008 /* XXX check all this stuff! */
2009 /* externalize from sv_xmm */
2011 fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs)
2013 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env;
2014 struct envxmm *penv_xmm = &sv_xmm->sv_env;
2018 bzero(fpregs, sizeof(*fpregs));
2020 /* FPU control/status */
2021 penv_fpreg->en_cw = penv_xmm->en_cw;
2022 penv_fpreg->en_sw = penv_xmm->en_sw;
2023 penv_fpreg->en_tw = penv_xmm->en_tw;
2024 penv_fpreg->en_opcode = penv_xmm->en_opcode;
2025 penv_fpreg->en_rip = penv_xmm->en_rip;
2026 penv_fpreg->en_rdp = penv_xmm->en_rdp;
2027 penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr;
2028 penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask;
2031 for (i = 0; i < 8; ++i)
2032 bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10);
2035 for (i = 0; i < 16; ++i)
2036 bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16);
2039 /* internalize from fpregs into sv_xmm */
2041 set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm)
2043 struct envxmm *penv_xmm = &sv_xmm->sv_env;
2044 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env;
2048 /* FPU control/status */
2049 penv_xmm->en_cw = penv_fpreg->en_cw;
2050 penv_xmm->en_sw = penv_fpreg->en_sw;
2051 penv_xmm->en_tw = penv_fpreg->en_tw;
2052 penv_xmm->en_opcode = penv_fpreg->en_opcode;
2053 penv_xmm->en_rip = penv_fpreg->en_rip;
2054 penv_xmm->en_rdp = penv_fpreg->en_rdp;
2055 penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr;
2056 penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask & cpu_mxcsr_mask;
2059 for (i = 0; i < 8; ++i)
2060 bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10);
2063 for (i = 0; i < 16; ++i)
2064 bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16);
2067 /* externalize from td->pcb */
2069 fill_fpregs(struct thread *td, struct fpreg *fpregs)
2072 KASSERT(td == curthread || TD_IS_SUSPENDED(td) ||
2073 P_SHOULDSTOP(td->td_proc),
2074 ("not suspended thread %p", td));
2076 fill_fpregs_xmm(get_pcb_user_save_td(td), fpregs);
2080 /* internalize to td->pcb */
2082 set_fpregs(struct thread *td, struct fpreg *fpregs)
2085 set_fpregs_xmm(fpregs, get_pcb_user_save_td(td));
2091 * Get machine context.
2094 get_mcontext(struct thread *td, mcontext_t *mcp, int flags)
2097 struct trapframe *tp;
2101 PROC_LOCK(curthread->td_proc);
2102 mcp->mc_onstack = sigonstack(tp->tf_rsp);
2103 PROC_UNLOCK(curthread->td_proc);
2104 mcp->mc_r15 = tp->tf_r15;
2105 mcp->mc_r14 = tp->tf_r14;
2106 mcp->mc_r13 = tp->tf_r13;
2107 mcp->mc_r12 = tp->tf_r12;
2108 mcp->mc_r11 = tp->tf_r11;
2109 mcp->mc_r10 = tp->tf_r10;
2110 mcp->mc_r9 = tp->tf_r9;
2111 mcp->mc_r8 = tp->tf_r8;
2112 mcp->mc_rdi = tp->tf_rdi;
2113 mcp->mc_rsi = tp->tf_rsi;
2114 mcp->mc_rbp = tp->tf_rbp;
2115 mcp->mc_rbx = tp->tf_rbx;
2116 mcp->mc_rcx = tp->tf_rcx;
2117 mcp->mc_rflags = tp->tf_rflags;
2118 if (flags & GET_MC_CLEAR_RET) {
2121 mcp->mc_rflags &= ~PSL_C;
2123 mcp->mc_rax = tp->tf_rax;
2124 mcp->mc_rdx = tp->tf_rdx;
2126 mcp->mc_rip = tp->tf_rip;
2127 mcp->mc_cs = tp->tf_cs;
2128 mcp->mc_rsp = tp->tf_rsp;
2129 mcp->mc_ss = tp->tf_ss;
2130 mcp->mc_ds = tp->tf_ds;
2131 mcp->mc_es = tp->tf_es;
2132 mcp->mc_fs = tp->tf_fs;
2133 mcp->mc_gs = tp->tf_gs;
2134 mcp->mc_flags = tp->tf_flags;
2135 mcp->mc_len = sizeof(*mcp);
2136 get_fpcontext(td, mcp, NULL, 0);
2137 mcp->mc_fsbase = pcb->pcb_fsbase;
2138 mcp->mc_gsbase = pcb->pcb_gsbase;
2139 mcp->mc_xfpustate = 0;
2140 mcp->mc_xfpustate_len = 0;
2141 bzero(mcp->mc_spare, sizeof(mcp->mc_spare));
2146 * Set machine context.
2148 * However, we don't set any but the user modifiable flags, and we won't
2149 * touch the cs selector.
2152 set_mcontext(struct thread *td, mcontext_t *mcp)
2155 struct trapframe *tp;
2162 if (mcp->mc_len != sizeof(*mcp) ||
2163 (mcp->mc_flags & ~_MC_FLAG_MASK) != 0)
2165 rflags = (mcp->mc_rflags & PSL_USERCHANGE) |
2166 (tp->tf_rflags & ~PSL_USERCHANGE);
2167 if (mcp->mc_flags & _MC_HASFPXSTATE) {
2168 if (mcp->mc_xfpustate_len > cpu_max_ext_state_size -
2169 sizeof(struct savefpu))
2171 xfpustate = __builtin_alloca(mcp->mc_xfpustate_len);
2172 ret = copyin((void *)mcp->mc_xfpustate, xfpustate,
2173 mcp->mc_xfpustate_len);
2178 ret = set_fpcontext(td, mcp, xfpustate, mcp->mc_xfpustate_len);
2181 tp->tf_r15 = mcp->mc_r15;
2182 tp->tf_r14 = mcp->mc_r14;
2183 tp->tf_r13 = mcp->mc_r13;
2184 tp->tf_r12 = mcp->mc_r12;
2185 tp->tf_r11 = mcp->mc_r11;
2186 tp->tf_r10 = mcp->mc_r10;
2187 tp->tf_r9 = mcp->mc_r9;
2188 tp->tf_r8 = mcp->mc_r8;
2189 tp->tf_rdi = mcp->mc_rdi;
2190 tp->tf_rsi = mcp->mc_rsi;
2191 tp->tf_rbp = mcp->mc_rbp;
2192 tp->tf_rbx = mcp->mc_rbx;
2193 tp->tf_rdx = mcp->mc_rdx;
2194 tp->tf_rcx = mcp->mc_rcx;
2195 tp->tf_rax = mcp->mc_rax;
2196 tp->tf_rip = mcp->mc_rip;
2197 tp->tf_rflags = rflags;
2198 tp->tf_rsp = mcp->mc_rsp;
2199 tp->tf_ss = mcp->mc_ss;
2200 tp->tf_flags = mcp->mc_flags;
2201 if (tp->tf_flags & TF_HASSEGS) {
2202 tp->tf_ds = mcp->mc_ds;
2203 tp->tf_es = mcp->mc_es;
2204 tp->tf_fs = mcp->mc_fs;
2205 tp->tf_gs = mcp->mc_gs;
2207 if (mcp->mc_flags & _MC_HASBASES) {
2208 pcb->pcb_fsbase = mcp->mc_fsbase;
2209 pcb->pcb_gsbase = mcp->mc_gsbase;
2211 set_pcb_flags(pcb, PCB_FULL_IRET);
2216 get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave,
2217 size_t xfpusave_len)
2219 size_t max_len, len;
2221 mcp->mc_ownedfp = fpugetregs(td);
2222 bcopy(get_pcb_user_save_td(td), &mcp->mc_fpstate[0],
2223 sizeof(mcp->mc_fpstate));
2224 mcp->mc_fpformat = fpuformat();
2225 if (!use_xsave || xfpusave_len == 0)
2227 max_len = cpu_max_ext_state_size - sizeof(struct savefpu);
2229 if (len > max_len) {
2231 bzero(xfpusave + max_len, len - max_len);
2233 mcp->mc_flags |= _MC_HASFPXSTATE;
2234 mcp->mc_xfpustate_len = len;
2235 bcopy(get_pcb_user_save_td(td) + 1, xfpusave, len);
2239 set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate,
2240 size_t xfpustate_len)
2242 struct savefpu *fpstate;
2245 if (mcp->mc_fpformat == _MC_FPFMT_NODEV)
2247 else if (mcp->mc_fpformat != _MC_FPFMT_XMM)
2249 else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) {
2250 /* We don't care what state is left in the FPU or PCB. */
2253 } else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU ||
2254 mcp->mc_ownedfp == _MC_FPOWNED_PCB) {
2255 fpstate = (struct savefpu *)&mcp->mc_fpstate;
2256 fpstate->sv_env.en_mxcsr &= cpu_mxcsr_mask;
2257 error = fpusetregs(td, fpstate, xfpustate, xfpustate_len);
2264 fpstate_drop(struct thread *td)
2267 KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu"));
2269 if (PCPU_GET(fpcurthread) == td)
2272 * XXX force a full drop of the fpu. The above only drops it if we
2275 * XXX I don't much like fpugetuserregs()'s semantics of doing a full
2276 * drop. Dropping only to the pcb matches fnsave's behaviour.
2277 * We only need to drop to !PCB_INITDONE in sendsig(). But
2278 * sendsig() is the only caller of fpugetuserregs()... perhaps we just
2279 * have too many layers.
2281 clear_pcb_flags(curthread->td_pcb,
2282 PCB_FPUINITDONE | PCB_USERFPUINITDONE);
2287 fill_dbregs(struct thread *td, struct dbreg *dbregs)
2292 dbregs->dr[0] = rdr0();
2293 dbregs->dr[1] = rdr1();
2294 dbregs->dr[2] = rdr2();
2295 dbregs->dr[3] = rdr3();
2296 dbregs->dr[6] = rdr6();
2297 dbregs->dr[7] = rdr7();
2300 dbregs->dr[0] = pcb->pcb_dr0;
2301 dbregs->dr[1] = pcb->pcb_dr1;
2302 dbregs->dr[2] = pcb->pcb_dr2;
2303 dbregs->dr[3] = pcb->pcb_dr3;
2304 dbregs->dr[6] = pcb->pcb_dr6;
2305 dbregs->dr[7] = pcb->pcb_dr7;
2321 set_dbregs(struct thread *td, struct dbreg *dbregs)
2327 load_dr0(dbregs->dr[0]);
2328 load_dr1(dbregs->dr[1]);
2329 load_dr2(dbregs->dr[2]);
2330 load_dr3(dbregs->dr[3]);
2331 load_dr6(dbregs->dr[6]);
2332 load_dr7(dbregs->dr[7]);
2335 * Don't let an illegal value for dr7 get set. Specifically,
2336 * check for undefined settings. Setting these bit patterns
2337 * result in undefined behaviour and can lead to an unexpected
2338 * TRCTRAP or a general protection fault right here.
2339 * Upper bits of dr6 and dr7 must not be set
2341 for (i = 0; i < 4; i++) {
2342 if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02)
2344 if (td->td_frame->tf_cs == _ucode32sel &&
2345 DBREG_DR7_LEN(dbregs->dr[7], i) == DBREG_DR7_LEN_8)
2348 if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 ||
2349 (dbregs->dr[7] & 0xffffffff00000000ul) != 0)
2355 * Don't let a process set a breakpoint that is not within the
2356 * process's address space. If a process could do this, it
2357 * could halt the system by setting a breakpoint in the kernel
2358 * (if ddb was enabled). Thus, we need to check to make sure
2359 * that no breakpoints are being enabled for addresses outside
2360 * process's address space.
2362 * XXX - what about when the watched area of the user's
2363 * address space is written into from within the kernel
2364 * ... wouldn't that still cause a breakpoint to be generated
2365 * from within kernel mode?
2368 if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) {
2369 /* dr0 is enabled */
2370 if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS)
2373 if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) {
2374 /* dr1 is enabled */
2375 if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS)
2378 if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) {
2379 /* dr2 is enabled */
2380 if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS)
2383 if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) {
2384 /* dr3 is enabled */
2385 if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS)
2389 pcb->pcb_dr0 = dbregs->dr[0];
2390 pcb->pcb_dr1 = dbregs->dr[1];
2391 pcb->pcb_dr2 = dbregs->dr[2];
2392 pcb->pcb_dr3 = dbregs->dr[3];
2393 pcb->pcb_dr6 = dbregs->dr[6];
2394 pcb->pcb_dr7 = dbregs->dr[7];
2396 set_pcb_flags(pcb, PCB_DBREGS);
2406 load_dr7(0); /* Turn off the control bits first */
2415 * Return > 0 if a hardware breakpoint has been hit, and the
2416 * breakpoint was in user space. Return 0, otherwise.
2419 user_dbreg_trap(void)
2421 u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */
2422 u_int64_t bp; /* breakpoint bits extracted from dr6 */
2423 int nbp; /* number of breakpoints that triggered */
2424 caddr_t addr[4]; /* breakpoint addresses */
2428 if ((dr7 & 0x000000ff) == 0) {
2430 * all GE and LE bits in the dr7 register are zero,
2431 * thus the trap couldn't have been caused by the
2432 * hardware debug registers
2439 bp = dr6 & 0x0000000f;
2443 * None of the breakpoint bits are set meaning this
2444 * trap was not caused by any of the debug registers
2450 * at least one of the breakpoints were hit, check to see
2451 * which ones and if any of them are user space addresses
2455 addr[nbp++] = (caddr_t)rdr0();
2458 addr[nbp++] = (caddr_t)rdr1();
2461 addr[nbp++] = (caddr_t)rdr2();
2464 addr[nbp++] = (caddr_t)rdr3();
2467 for (i = 0; i < nbp; i++) {
2468 if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) {
2470 * addr[i] is in user space
2477 * None of the breakpoints are in user space.
2485 * Provide inb() and outb() as functions. They are normally only available as
2486 * inline functions, thus cannot be called from the debugger.
2489 /* silence compiler warnings */
2490 u_char inb_(u_short);
2491 void outb_(u_short, u_char);
2500 outb_(u_short port, u_char data)