2 * Copyright (c) 1990 The Regents of the University of California.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by the University of
16 * California, Berkeley and its contributors.
17 * 4. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * from: @(#)sys_machdep.c 5.5 (Berkeley) 1/19/91
38 #include "opt_user_ldt.h"
41 #include <sys/param.h>
42 #include <sys/systm.h>
43 #include <sys/sysproto.h>
49 #include <vm/vm_map.h>
50 #include <vm/vm_extern.h>
54 #include <machine/cpu.h>
55 #include <machine/pcb_ext.h> /* pcb.h included by sys/user.h */
56 #include <machine/sysarch.h>
58 #include <vm/vm_kern.h> /* for kernel_map */
61 #define LD_PER_PAGE 512
62 #define NEW_MAX_LD(num) ((num + LD_PER_PAGE) & ~(LD_PER_PAGE-1))
63 #define SIZE_FROM_LARGEST_LD(num) (NEW_MAX_LD(num) << 3)
68 void set_user_ldt __P((struct pcb *pcb));
69 static int i386_get_ldt __P((struct proc *, char *));
70 static int i386_set_ldt __P((struct proc *, char *));
72 static int i386_get_ioperm __P((struct proc *, char *));
73 static int i386_set_ioperm __P((struct proc *, char *));
74 int i386_extend_pcb __P((struct proc *));
76 #ifndef _SYS_SYSPROTO_H_
86 register struct sysarch_args *uap;
93 error = i386_get_ldt(p, uap->parms);
97 error = i386_set_ldt(p, uap->parms);
100 case I386_GET_IOPERM:
101 error = i386_get_ioperm(p, uap->parms);
103 case I386_SET_IOPERM:
104 error = i386_set_ioperm(p, uap->parms);
107 error = vm86_sysarch(p, uap->parms);
117 i386_extend_pcb(struct proc *p)
122 struct soft_segment_descriptor ssd = {
123 0, /* segment base address (overwritten) */
124 ctob(IOPAGES + 1) - 1, /* length */
125 SDT_SYS386TSS, /* segment type */
126 0, /* priority level */
127 1, /* descriptor present */
129 0, /* default 32 size */
133 ext = (struct pcb_ext *)kmem_alloc(kernel_map, ctob(IOPAGES+1));
136 p->p_addr->u_pcb.pcb_ext = ext;
137 bzero(ext, sizeof(struct pcb_ext));
138 ext->ext_tss.tss_esp0 = (unsigned)p->p_addr + ctob(UPAGES) - 16;
139 ext->ext_tss.tss_ss0 = GSEL(GDATA_SEL, SEL_KPL);
141 * The last byte of the i/o map must be followed by an 0xff byte.
142 * We arbitrarily allocate 16 bytes here, to keep the starting
143 * address on a doubleword boundary.
145 offset = PAGE_SIZE - 16;
146 ext->ext_tss.tss_ioopt =
147 (offset - ((unsigned)&ext->ext_tss - (unsigned)ext)) << 16;
148 ext->ext_iomap = (caddr_t)ext + offset;
149 ext->ext_vm86.vm86_intmap = (caddr_t)ext + offset - 32;
151 addr = (u_long *)ext->ext_vm86.vm86_intmap;
152 for (i = 0; i < (ctob(IOPAGES) + 32 + 16) / sizeof(u_long); i++)
155 ssd.ssd_base = (unsigned)&ext->ext_tss;
156 ssd.ssd_limit -= ((unsigned)&ext->ext_tss - (unsigned)ext);
157 ssdtosd(&ssd, &ext->ext_tssd);
159 /* switch to the new TSS after syscall completes */
166 i386_set_ioperm(p, args)
171 struct i386_ioperm_args ua;
174 if ((error = copyin(args, &ua, sizeof(struct i386_ioperm_args))) != 0)
177 if ((error = suser(p)) != 0)
183 * While this is restricted to root, we should probably figure out
184 * whether any other driver is using this i/o address, as so not to
185 * cause confusion. This probably requires a global 'usage registry'.
188 if (p->p_addr->u_pcb.pcb_ext == 0)
189 if ((error = i386_extend_pcb(p)) != 0)
191 iomap = (char *)p->p_addr->u_pcb.pcb_ext->ext_iomap;
193 if (ua.start + ua.length > IOPAGES * PAGE_SIZE * NBBY)
196 for (i = ua.start; i < ua.start + ua.length; i++) {
198 iomap[i >> 3] &= ~(1 << (i & 7));
200 iomap[i >> 3] |= (1 << (i & 7));
206 i386_get_ioperm(p, args)
211 struct i386_ioperm_args ua;
214 if ((error = copyin(args, &ua, sizeof(struct i386_ioperm_args))) != 0)
216 if (ua.start >= IOPAGES * PAGE_SIZE * NBBY)
219 if (p->p_addr->u_pcb.pcb_ext == 0) {
224 iomap = (char *)p->p_addr->u_pcb.pcb_ext->ext_iomap;
227 state = (iomap[i >> 3] >> (i & 7)) & 1;
231 for (i = ua.start + 1; i < IOPAGES * PAGE_SIZE * NBBY; i++) {
232 if (state != ((iomap[i >> 3] >> (i & 7)) & 1))
238 error = copyout(&ua, args, sizeof(struct i386_ioperm_args));
244 * Update the GDT entry pointing to the LDT to point to the LDT of the
245 * current process. Do not staticize.
248 set_user_ldt(struct pcb *pcb)
250 gdt_segs[GUSERLDT_SEL].ssd_base = (unsigned)pcb->pcb_ldt;
251 gdt_segs[GUSERLDT_SEL].ssd_limit = (pcb->pcb_ldt_len * sizeof(union descriptor)) - 1;
253 ssdtosd(&gdt_segs[GUSERLDT_SEL], &gdt[cpuid * NGDT + GUSERLDT_SEL].sd);
255 ssdtosd(&gdt_segs[GUSERLDT_SEL], &gdt[GUSERLDT_SEL].sd);
257 lldt(GSEL(GUSERLDT_SEL, SEL_KPL));
258 currentldt = GSEL(GUSERLDT_SEL, SEL_KPL);
262 i386_get_ldt(p, args)
267 struct pcb *pcb = &p->p_addr->u_pcb;
269 union descriptor *lp;
271 struct i386_ldt_args ua, *uap = &ua;
273 if ((error = copyin(args, uap, sizeof(struct i386_ldt_args))) < 0)
277 printf("i386_get_ldt: start=%d num=%d descs=%p\n",
278 uap->start, uap->num, (void *)uap->descs);
281 /* verify range of LDTs exist */
282 if ((uap->start < 0) || (uap->num <= 0))
288 nldt = pcb->pcb_ldt_len;
289 num = min(uap->num, nldt);
290 lp = &((union descriptor *)(pcb->pcb_ldt))[uap->start];
292 nldt = sizeof(ldt)/sizeof(ldt[0]);
293 num = min(uap->num, nldt);
294 lp = &ldt[uap->start];
296 if (uap->start > nldt) {
301 error = copyout(lp, uap->descs, num * sizeof(union descriptor));
303 p->p_retval[0] = num;
310 i386_set_ldt(p, args)
316 struct pcb *pcb = &p->p_addr->u_pcb;
318 struct i386_ldt_args ua, *uap = &ua;
320 if ((error = copyin(args, uap, sizeof(struct i386_ldt_args))) < 0)
324 printf("i386_set_ldt: start=%d num=%d descs=%p\n",
325 uap->start, uap->num, (void *)uap->descs);
328 /* verify range of descriptors to modify */
329 if ((uap->start < 0) || (uap->start >= MAX_LD) || (uap->num < 0) ||
334 largest_ld = uap->start + uap->num - 1;
335 if (largest_ld >= MAX_LD)
338 /* allocate user ldt */
339 if (!pcb->pcb_ldt || (largest_ld >= pcb->pcb_ldt_len)) {
340 union descriptor *new_ldt = (union descriptor *)kmem_alloc(
341 kernel_map, SIZE_FROM_LARGEST_LD(largest_ld));
342 if (new_ldt == NULL) {
346 bcopy(pcb->pcb_ldt, new_ldt, pcb->pcb_ldt_len
347 * sizeof(union descriptor));
348 kmem_free(kernel_map, (vm_offset_t)pcb->pcb_ldt,
349 pcb->pcb_ldt_len * sizeof(union descriptor));
351 bcopy(ldt, new_ldt, sizeof(ldt));
353 pcb->pcb_ldt = (caddr_t)new_ldt;
354 pcb->pcb_ldt_len = NEW_MAX_LD(largest_ld);
359 /* Check descriptors for access violations */
360 for (i = 0, n = uap->start; i < uap->num; i++, n++) {
361 union descriptor desc, *dp;
363 error = copyin(dp, &desc, sizeof(union descriptor));
367 switch (desc.sd.sd_type) {
368 case SDT_SYSNULL: /* system null */
371 case SDT_SYS286TSS: /* system 286 TSS available */
372 case SDT_SYSLDT: /* system local descriptor table */
373 case SDT_SYS286BSY: /* system 286 TSS busy */
374 case SDT_SYSTASKGT: /* system task gate */
375 case SDT_SYS286IGT: /* system 286 interrupt gate */
376 case SDT_SYS286TGT: /* system 286 trap gate */
377 case SDT_SYSNULL2: /* undefined by Intel */
378 case SDT_SYS386TSS: /* system 386 TSS available */
379 case SDT_SYSNULL3: /* undefined by Intel */
380 case SDT_SYS386BSY: /* system 386 TSS busy */
381 case SDT_SYSNULL4: /* undefined by Intel */
382 case SDT_SYS386IGT: /* system 386 interrupt gate */
383 case SDT_SYS386TGT: /* system 386 trap gate */
384 case SDT_SYS286CGT: /* system 286 call gate */
385 case SDT_SYS386CGT: /* system 386 call gate */
386 /* I can't think of any reason to allow a user proc
387 * to create a segment of these types. They are
392 /* memory segment types */
393 case SDT_MEMEC: /* memory execute only conforming */
394 case SDT_MEMEAC: /* memory execute only accessed conforming */
395 case SDT_MEMERC: /* memory execute read conforming */
396 case SDT_MEMERAC: /* memory execute read accessed conforming */
397 /* Must be "present" if executable and conforming. */
398 if (desc.sd.sd_p == 0)
401 case SDT_MEMRO: /* memory read only */
402 case SDT_MEMROA: /* memory read only accessed */
403 case SDT_MEMRW: /* memory read write */
404 case SDT_MEMRWA: /* memory read write accessed */
405 case SDT_MEMROD: /* memory read only expand dwn limit */
406 case SDT_MEMRODA: /* memory read only expand dwn lim accessed */
407 case SDT_MEMRWD: /* memory read write expand dwn limit */
408 case SDT_MEMRWDA: /* memory read write expand dwn lim acessed */
409 case SDT_MEME: /* memory execute only */
410 case SDT_MEMEA: /* memory execute only accessed */
411 case SDT_MEMER: /* memory execute read */
412 case SDT_MEMERA: /* memory execute read accessed */
419 /* Only user (ring-3) descriptors may be present. */
420 if ((desc.sd.sd_p != 0) && (desc.sd.sd_dpl != SEL_UPL))
427 error = copyin(uap->descs,
428 &((union descriptor *)(pcb->pcb_ldt))[uap->start],
429 uap->num * sizeof(union descriptor));
431 p->p_retval[0] = uap->start;
436 #endif /* USER_LDT */