]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/arm/allwinner/axp209reg.h
sqlite3: Vendor import of sqlite3 3.43.1
[FreeBSD/FreeBSD.git] / sys / arm / allwinner / axp209reg.h
1 /*-
2  * Copyright (c) 2016 Emmanuel Vadot <manu@freeebsd.org>
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  */
24
25 #ifndef _AXP209REG_H_
26 #define _AXP209REG_H_
27
28 /* Power State Register */
29 #define AXP2XX_PSR              0x00
30 #define AXP2XX_PSR_ACIN         0x80
31 #define AXP2XX_PSR_ACIN_SHIFT   7
32 #define AXP2XX_PSR_VBUS         0x20
33 #define AXP2XX_PSR_VBUS_SHIFT   5
34
35 /* Shutdown and battery control */
36 #define AXP2XX_SHUTBAT          0x32
37 #define AXP2XX_SHUTBAT_SHUTDOWN 0x80
38
39 /* Voltage/Current Monitor */
40 #define AXP209_ACIN_VOLTAGE             0x56
41 #define AXP209_ACIN_CURRENT             0x58
42 #define AXP209_VBUS_VOLTAGE             0x5A
43 #define AXP209_VBUS_CURRENT             0x5C
44 #define AXP2XX_BAT_VOLTAGE              0x78
45 #define AXP2XX_BAT_CHARGE_CURRENT       0x7A
46 #define AXP2XX_BAT_DISCHARGE_CURRENT    0x7C
47
48 #define AXP209_VOLT_STEP        1700
49 #define AXP2XX_BATVOLT_STEP     1100
50 #define AXP209_ACCURRENT_STEP   625
51 #define AXP209_VBUSCURRENT_STEP 375
52 #define AXP2XX_BATCURRENT_STEP  500
53
54 /* Temperature monitor */
55 #define AXP209_TEMPMON          0x5e
56 #define AXP209_TEMPMON_MIN      1447    /* -144.7C */
57 #define AXP221_TEMPMON_MIN      2437    /* -243.7C */
58
59 #define AXP221_TEMPMON          0x56
60
61 /* Sensors conversion macros */
62 #define AXP209_SENSOR_H(a)      ((a) << 4)
63 #define AXP209_SENSOR_L(a)      ((a) & 0xf)
64 #define AXP209_SENSOR_BAT_H(a)  ((a) << 5)
65 #define AXP209_SENSOR_BAT_L(a)  ((a) & 0x1f)
66
67 #define AXP209_0C_TO_K          2732
68
69 /* ADC Sensors */
70 #define AXP2XX_ADC_ENABLE1      0x82
71 #define AXP209_ADC_ENABLE2      0x83
72
73 #define AXP2XX_ADC1_BATVOLT     (1 << 7)
74 #define AXP2XX_ADC1_BATCURRENT  (1 << 6)
75 #define AXP209_ADC1_ACVOLT      (1 << 5)
76 #define AXP221_ADC1_TEMP        (1 << 5)
77 #define AXP209_ADC1_ACCURRENT   (1 << 4)
78 #define AXP209_ADC1_VBUSVOLT    (1 << 3)
79 #define AXP209_ADC1_VBUSCURRENT (1 << 2)
80 #define AXP221_ADC1_TS_PIN      (1 << 0)
81
82 #define AXP209_ADC2_TEMP        (1 << 7)
83
84 /* Interrupt related registers */
85 #define AXP2XX_IRQ1_ENABLE      0x40
86 #define AXP2XX_IRQ1_STATUS      0x48
87 #define  AXP2XX_IRQ1_AC_OVERVOLT        (1 << 7)
88 #define  AXP2XX_IRQ1_AC_CONN            (1 << 6)
89 #define  AXP2XX_IRQ1_AC_DISCONN         (1 << 5)
90 #define  AXP2XX_IRQ1_VBUS_OVERVOLT      (1 << 4)
91 #define  AXP2XX_IRQ1_VBUS_CONN          (1 << 3)
92 #define  AXP2XX_IRQ1_VBUS_DISCONN       (1 << 2)
93 #define  AXP2XX_IRQ1_VBUS_LOW           (1 << 1)
94
95 #define AXP2XX_IRQ2_ENABLE      0x41
96 #define AXP2XX_IRQ2_STATUS      0x49
97 #define  AXP2XX_IRQ2_BATT_CONN                  (1 << 7)
98 #define  AXP2XX_IRQ2_BATT_DISCONN               (1 << 6)
99 #define  AXP2XX_IRQ2_BATT_CHARGE_ACCT_ON        (1 << 5)
100 #define  AXP2XX_IRQ2_BATT_CHARGE_ACCT_OFF       (1 << 4)
101 #define  AXP2XX_IRQ2_BATT_CHARGING              (1 << 3)
102 #define  AXP2XX_IRQ2_BATT_CHARGED               (1 << 2)
103 #define  AXP2XX_IRQ2_BATT_TEMP_OVER             (1 << 1)
104 #define  AXP2XX_IRQ2_BATT_TEMP_LOW              (1 << 0)
105
106 #define AXP2XX_IRQ3_ENABLE      0x42
107 #define AXP2XX_IRQ3_STATUS      0x4A
108 #define  AXP2XX_IRQ3_TEMP_OVER          (1 << 7)
109 #define  AXP2XX_IRQ3_CHARGE_CURRENT_LOW (1 << 6)
110 #define  AXP2XX_IRQ3_DCDC2_LOW          (1 << 4)
111 #define  AXP2XX_IRQ3_DCDC3_LOW          (1 << 3)
112 #define  AXP2XX_IRQ3_LDO3_LOW           (1 << 2)
113 #define  AXP2XX_IRQ3_PEK_SHORT          (1 << 1)
114 #define  AXP2XX_IRQ3_PEK_LONG           (1 << 0)
115
116 #define AXP2XX_IRQ4_ENABLE      0x43
117 #define AXP2XX_IRQ4_STATUS      0x4B
118 #define  AXP2XX_IRQ4_NOE_START          (1 << 7)
119 #define  AXP2XX_IRQ4_NOE_SHUT           (1 << 6)
120 #define  AXP2XX_IRQ4_VBUS_VALID         (1 << 5)
121 #define  AXP2XX_IRQ4_VBUS_INVALID       (1 << 4)
122 #define  AXP2XX_IRQ4_VBUS_SESSION       (1 << 3)
123 #define  AXP2XX_IRQ4_VBUS_SESSION_END   (1 << 2)
124 #define  AXP2XX_IRQ4_APS_LOW_1          (1 << 1)
125 #define  AXP2XX_IRQ4_APS_LOW_2          (1 << 0)
126
127 #define AXP2XX_IRQ5_ENABLE      0x44
128 #define AXP2XX_IRQ5_STATUS      0x4C
129 #define  AXP2XX_IRQ5_TIMER_EXPIRE       (1 << 7)
130 #define  AXP2XX_IRQ5_PEK_RISE_EDGE      (1 << 6)
131 #define  AXP2XX_IRQ5_PEK_FALL_EDGE      (1 << 5)
132 #define  AXP2XX_IRQ5_GPIO3      (1 << 3)
133 #define  AXP2XX_IRQ5_GPIO2      (1 << 2)
134 #define  AXP2XX_IRQ5_GPIO1      (1 << 1)
135 #define  AXP2XX_IRQ5_GPIO0      (1 << 0)
136
137 #define AXP2XX_IRQ_ACK          0xff
138
139 /* GPIOs registers */
140 #define AXP2XX_GPIO_FUNC_MASK           0x7
141
142 #define AXP2XX_GPIO_FUNC_DRVLO          0x0
143 #define AXP2XX_GPIO_FUNC_DRVHI          0x1
144 #define AXP2XX_GPIO_FUNC_INPUT          0x2
145
146 #define AXP2XX_GPIO0_CTRL       0x90
147 #define AXP2XX_GPIO1_CTRL       0x92
148 #define AXP209_GPIO2_CTRL       0x93
149 #define AXP2XX_GPIO_STATUS      0x94
150
151 /* Regulators registers */
152 #define AXP209_POWERCTL                 0x12
153 #define  AXP209_POWERCTL_LDO3           (1 << 6)
154 #define  AXP209_POWERCTL_DCDC2          (1 << 4)
155 #define  AXP209_POWERCTL_LDO4           (1 << 3)
156 #define  AXP209_POWERCTL_LDO2           (1 << 2)
157 #define  AXP209_POWERCTL_DCDC3          (1 << 1)
158
159 #define AXP221_POWERCTL_1               0x10
160 #define  AXP221_POWERCTL1_ALDO2         (1 << 7)
161 #define  AXP221_POWERCTL1_ALDO1         (1 << 6)
162 #define  AXP221_POWERCTL1_DCDC5         (1 << 5)
163 #define  AXP221_POWERCTL1_DCDC4         (1 << 4)
164 #define  AXP221_POWERCTL1_DCDC3         (1 << 3)
165 #define  AXP221_POWERCTL1_DCDC2         (1 << 2)
166 #define  AXP221_POWERCTL1_DCDC1         (1 << 1)
167 #define  AXP221_POWERCTL1_DC5LDO        (1 << 0)
168
169 #define AXP221_POWERCTL_2               0x12
170 #define  AXP221_POWERCTL2_DC1SW         (1 << 7)
171 #define  AXP221_POWERCTL2_DLDO4         (1 << 6)
172 #define  AXP221_POWERCTL2_DLDO3         (1 << 5)
173 #define  AXP221_POWERCTL2_DLDO2         (1 << 4)
174 #define  AXP221_POWERCTL2_DLDO1         (1 << 3)
175 #define  AXP221_POWERCTL2_ELDO3         (1 << 2)
176 #define  AXP221_POWERCTL2_ELDO2         (1 << 1)
177 #define  AXP221_POWERCTL2_ELDO1         (1 << 0)
178
179 #define AXP221_POWERCTL_3               0x14
180 #define  AXP221_POWERCTL3_ALDO3         (1 << 7)
181
182 #define AXP209_REG_DCDC2_VOLTAGE        0x23
183 #define AXP209_REG_DCDC3_VOLTAGE        0x27
184 #define AXP209_REG_LDO24_VOLTAGE        0x28
185 #define AXP209_REG_LDO3_VOLTAGE         0x29
186
187 #define AXP221_REG_DLDO1_VOLTAGE        0x15
188 #define AXP221_REG_DLDO2_VOLTAGE        0x16
189 #define AXP221_REG_DLDO3_VOLTAGE        0x17
190 #define AXP221_REG_DLDO4_VOLTAGE        0x18
191 #define AXP221_REG_ELDO1_VOLTAGE        0x19
192 #define AXP221_REG_ELDO2_VOLTAGE        0x1A
193 #define AXP221_REG_ELDO3_VOLTAGE        0x1B
194 #define AXP221_REG_DC5LDO_VOLTAGE       0x1C
195 #define AXP221_REG_DCDC1_VOLTAGE        0x21
196 #define AXP221_REG_DCDC2_VOLTAGE        0x22
197 #define AXP221_REG_DCDC3_VOLTAGE        0x23
198 #define AXP221_REG_DCDC4_VOLTAGE        0x24
199 #define AXP221_REG_DCDC5_VOLTAGE        0x25
200 #define AXP221_REG_DCDC23_VRC           0x27
201 #define AXP221_REG_ALDO1_VOLTAGE        0x28
202 #define AXP221_REG_ALDO2_VOLTAGE        0x29
203 #define AXP221_REG_ALDO3_VOLTAGE        0x2A
204
205 enum axp2xx_sensor {
206         AXP209_ACVOLT,
207         AXP209_ACCURRENT,
208         AXP209_VBUSVOLT,
209         AXP209_VBUSCURRENT,
210         AXP2XX_TEMP,
211         AXP2XX_BATVOLT,
212         AXP2XX_BATCHARGECURRENT,
213         AXP2XX_BATDISCHARGECURRENT,
214 };
215
216 enum axp2xx_regulators {
217         AXP209_REG_ID_DCDC2,
218         AXP209_REG_ID_DCDC3,
219         AXP209_REG_ID_LDO1,
220         AXP209_REG_ID_LDO2,
221         AXP209_REG_ID_LDO3,
222         /* LDO4 is weird, need to find a correct way to handle it */
223         /* AXP209_REG_ID_LDO4, */
224         AXP209_REG_ID_LDO5,
225         AXP221_REG_ID_DLDO1,
226         AXP221_REG_ID_DLDO2,
227         AXP221_REG_ID_DLDO3,
228         AXP221_REG_ID_DLDO4,
229         AXP221_REG_ID_ELDO1,
230         AXP221_REG_ID_ELDO2,
231         AXP221_REG_ID_ELDO3,
232         AXP221_REG_ID_DC5LDO,
233         AXP221_REG_ID_DCDC1,
234         AXP221_REG_ID_DCDC2,
235         AXP221_REG_ID_DCDC3,
236         AXP221_REG_ID_DCDC4,
237         AXP221_REG_ID_DCDC5,
238         AXP221_REG_ID_ALDO1,
239         AXP221_REG_ID_ALDO2,
240         AXP221_REG_ID_ALDO3,
241         AXP221_REG_ID_DC1SW,
242 };
243
244 #endif /* _AXP209REG_H_ */