]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/arm/allwinner/axp209reg.h
Rename pwmbus.h to ofw_pwm.h, because after all the recent changes, there
[FreeBSD/FreeBSD.git] / sys / arm / allwinner / axp209reg.h
1 /*-
2  * Copyright (c) 2016 Emmanuel Vadot <manu@freeebsd.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  *
25  * $FreeBSD$
26  */
27
28 #ifndef _AXP209REG_H_
29 #define _AXP209REG_H_
30
31 /* Power State Register */
32 #define AXP2XX_PSR              0x00
33 #define AXP2XX_PSR_ACIN         0x80
34 #define AXP2XX_PSR_ACIN_SHIFT   7
35 #define AXP2XX_PSR_VBUS         0x20
36 #define AXP2XX_PSR_VBUS_SHIFT   5
37
38 /* Shutdown and battery control */
39 #define AXP2XX_SHUTBAT          0x32
40 #define AXP2XX_SHUTBAT_SHUTDOWN 0x80
41
42 /* Voltage/Current Monitor */
43 #define AXP209_ACIN_VOLTAGE             0x56
44 #define AXP209_ACIN_CURRENT             0x58
45 #define AXP209_VBUS_VOLTAGE             0x5A
46 #define AXP209_VBUS_CURRENT             0x5C
47 #define AXP2XX_BAT_VOLTAGE              0x78
48 #define AXP2XX_BAT_CHARGE_CURRENT       0x7A
49 #define AXP2XX_BAT_DISCHARGE_CURRENT    0x7C
50
51 #define AXP209_VOLT_STEP        1700
52 #define AXP2XX_BATVOLT_STEP     1100
53 #define AXP209_ACCURRENT_STEP   625
54 #define AXP209_VBUSCURRENT_STEP 375
55 #define AXP2XX_BATCURRENT_STEP  500
56
57 /* Temperature monitor */
58 #define AXP209_TEMPMON          0x5e
59 #define AXP209_TEMPMON_MIN      1447    /* -144.7C */
60 #define AXP221_TEMPMON_MIN      2437    /* -243.7C */
61
62 #define AXP221_TEMPMON          0x56
63
64 /* Sensors conversion macros */
65 #define AXP209_SENSOR_H(a)      ((a) << 4)
66 #define AXP209_SENSOR_L(a)      ((a) & 0xf)
67 #define AXP209_SENSOR_BAT_H(a)  ((a) << 5)
68 #define AXP209_SENSOR_BAT_L(a)  ((a) & 0x1f)
69
70 #define AXP209_0C_TO_K          2732
71
72 /* ADC Sensors */
73 #define AXP2XX_ADC_ENABLE1      0x82
74 #define AXP209_ADC_ENABLE2      0x83
75
76 #define AXP2XX_ADC1_BATVOLT     (1 << 7)
77 #define AXP2XX_ADC1_BATCURRENT  (1 << 6)
78 #define AXP209_ADC1_ACVOLT      (1 << 5)
79 #define AXP221_ADC1_TEMP        (1 << 5)
80 #define AXP209_ADC1_ACCURRENT   (1 << 4)
81 #define AXP209_ADC1_VBUSVOLT    (1 << 3)
82 #define AXP209_ADC1_VBUSCURRENT (1 << 2)
83 #define AXP221_ADC1_TS_PIN      (1 << 0)
84
85 #define AXP209_ADC2_TEMP        (1 << 7)
86
87 /* Interrupt related registers */
88 #define AXP2XX_IRQ1_ENABLE      0x40
89 #define AXP2XX_IRQ1_STATUS      0x48
90 #define  AXP2XX_IRQ1_AC_OVERVOLT        (1 << 7)
91 #define  AXP2XX_IRQ1_AC_CONN            (1 << 6)
92 #define  AXP2XX_IRQ1_AC_DISCONN         (1 << 5)
93 #define  AXP2XX_IRQ1_VBUS_OVERVOLT      (1 << 4)
94 #define  AXP2XX_IRQ1_VBUS_CONN          (1 << 3)
95 #define  AXP2XX_IRQ1_VBUS_DISCONN       (1 << 2)
96 #define  AXP2XX_IRQ1_VBUS_LOW           (1 << 1)
97
98 #define AXP2XX_IRQ2_ENABLE      0x41
99 #define AXP2XX_IRQ2_STATUS      0x49
100 #define  AXP2XX_IRQ2_BATT_CONN                  (1 << 7)
101 #define  AXP2XX_IRQ2_BATT_DISCONN               (1 << 6)
102 #define  AXP2XX_IRQ2_BATT_CHARGE_ACCT_ON        (1 << 5)
103 #define  AXP2XX_IRQ2_BATT_CHARGE_ACCT_OFF       (1 << 4)
104 #define  AXP2XX_IRQ2_BATT_CHARGING              (1 << 3)
105 #define  AXP2XX_IRQ2_BATT_CHARGED               (1 << 2)
106 #define  AXP2XX_IRQ2_BATT_TEMP_OVER             (1 << 1)
107 #define  AXP2XX_IRQ2_BATT_TEMP_LOW              (1 << 0)
108
109 #define AXP2XX_IRQ3_ENABLE      0x42
110 #define AXP2XX_IRQ3_STATUS      0x4A
111 #define  AXP2XX_IRQ3_TEMP_OVER          (1 << 7)
112 #define  AXP2XX_IRQ3_CHARGE_CURRENT_LOW (1 << 6)
113 #define  AXP2XX_IRQ3_DCDC2_LOW          (1 << 4)
114 #define  AXP2XX_IRQ3_DCDC3_LOW          (1 << 3)
115 #define  AXP2XX_IRQ3_LDO3_LOW           (1 << 2)
116 #define  AXP2XX_IRQ3_PEK_SHORT          (1 << 1)
117 #define  AXP2XX_IRQ3_PEK_LONG           (1 << 0)
118
119 #define AXP2XX_IRQ4_ENABLE      0x43
120 #define AXP2XX_IRQ4_STATUS      0x4B
121 #define  AXP2XX_IRQ4_NOE_START          (1 << 7)
122 #define  AXP2XX_IRQ4_NOE_SHUT           (1 << 6)
123 #define  AXP2XX_IRQ4_VBUS_VALID         (1 << 5)
124 #define  AXP2XX_IRQ4_VBUS_INVALID       (1 << 4)
125 #define  AXP2XX_IRQ4_VBUS_SESSION       (1 << 3)
126 #define  AXP2XX_IRQ4_VBUS_SESSION_END   (1 << 2)
127 #define  AXP2XX_IRQ4_APS_LOW_1          (1 << 1)
128 #define  AXP2XX_IRQ4_APS_LOW_2          (1 << 0)
129
130 #define AXP2XX_IRQ5_ENABLE      0x44
131 #define AXP2XX_IRQ5_STATUS      0x4C
132 #define  AXP2XX_IRQ5_TIMER_EXPIRE       (1 << 7)
133 #define  AXP2XX_IRQ5_PEK_RISE_EDGE      (1 << 6)
134 #define  AXP2XX_IRQ5_PEK_FALL_EDGE      (1 << 5)
135 #define  AXP2XX_IRQ5_GPIO3      (1 << 3)
136 #define  AXP2XX_IRQ5_GPIO2      (1 << 2)
137 #define  AXP2XX_IRQ5_GPIO1      (1 << 1)
138 #define  AXP2XX_IRQ5_GPIO0      (1 << 0)
139
140 #define AXP2XX_IRQ_ACK          0xff
141
142 /* GPIOs registers */
143 #define AXP2XX_GPIO_FUNC_MASK           0x7
144
145 #define AXP2XX_GPIO_FUNC_DRVLO          0x0
146 #define AXP2XX_GPIO_FUNC_DRVHI          0x1
147 #define AXP2XX_GPIO_FUNC_INPUT          0x2
148
149 #define AXP2XX_GPIO0_CTRL       0x90
150 #define AXP2XX_GPIO1_CTRL       0x92
151 #define AXP209_GPIO2_CTRL       0x93
152 #define AXP2XX_GPIO_STATUS      0x94
153
154 /* Regulators registers */
155 #define AXP209_POWERCTL                 0x12
156 #define  AXP209_POWERCTL_LDO3           (1 << 6)
157 #define  AXP209_POWERCTL_DCDC2          (1 << 4)
158 #define  AXP209_POWERCTL_LDO4           (1 << 3)
159 #define  AXP209_POWERCTL_LDO2           (1 << 2)
160 #define  AXP209_POWERCTL_DCDC3          (1 << 1)
161
162 #define AXP221_POWERCTL_1               0x10
163 #define  AXP221_POWERCTL1_ALDO2         (1 << 7)
164 #define  AXP221_POWERCTL1_ALDO1         (1 << 6)
165 #define  AXP221_POWERCTL1_DCDC5         (1 << 5)
166 #define  AXP221_POWERCTL1_DCDC4         (1 << 4)
167 #define  AXP221_POWERCTL1_DCDC3         (1 << 3)
168 #define  AXP221_POWERCTL1_DCDC2         (1 << 2)
169 #define  AXP221_POWERCTL1_DCDC1         (1 << 1)
170 #define  AXP221_POWERCTL1_DC5LDO        (1 << 0)
171
172 #define AXP221_POWERCTL_2               0x12
173 #define  AXP221_POWERCTL2_DC1SW         (1 << 7)
174 #define  AXP221_POWERCTL2_DLDO4         (1 << 6)
175 #define  AXP221_POWERCTL2_DLDO3         (1 << 5)
176 #define  AXP221_POWERCTL2_DLDO2         (1 << 4)
177 #define  AXP221_POWERCTL2_DLDO1         (1 << 3)
178 #define  AXP221_POWERCTL2_ELDO3         (1 << 2)
179 #define  AXP221_POWERCTL2_ELDO2         (1 << 1)
180 #define  AXP221_POWERCTL2_ELDO1         (1 << 0)
181
182 #define AXP221_POWERCTL_3               0x14
183 #define  AXP221_POWERCTL3_ALDO3         (1 << 7)
184
185 #define AXP209_REG_DCDC2_VOLTAGE        0x23
186 #define AXP209_REG_DCDC3_VOLTAGE        0x27
187 #define AXP209_REG_LDO24_VOLTAGE        0x28
188 #define AXP209_REG_LDO3_VOLTAGE         0x29
189
190 #define AXP221_REG_DLDO1_VOLTAGE        0x15
191 #define AXP221_REG_DLDO2_VOLTAGE        0x16
192 #define AXP221_REG_DLDO3_VOLTAGE        0x17
193 #define AXP221_REG_DLDO4_VOLTAGE        0x18
194 #define AXP221_REG_ELDO1_VOLTAGE        0x19
195 #define AXP221_REG_ELDO2_VOLTAGE        0x1A
196 #define AXP221_REG_ELDO3_VOLTAGE        0x1B
197 #define AXP221_REG_DC5LDO_VOLTAGE       0x1C
198 #define AXP221_REG_DCDC1_VOLTAGE        0x21
199 #define AXP221_REG_DCDC2_VOLTAGE        0x22
200 #define AXP221_REG_DCDC3_VOLTAGE        0x23
201 #define AXP221_REG_DCDC4_VOLTAGE        0x24
202 #define AXP221_REG_DCDC5_VOLTAGE        0x25
203 #define AXP221_REG_DCDC23_VRC           0x27
204 #define AXP221_REG_ALDO1_VOLTAGE        0x28
205 #define AXP221_REG_ALDO2_VOLTAGE        0x29
206 #define AXP221_REG_ALDO3_VOLTAGE        0x2A
207
208
209 enum axp2xx_sensor {
210         AXP209_ACVOLT,
211         AXP209_ACCURRENT,
212         AXP209_VBUSVOLT,
213         AXP209_VBUSCURRENT,
214         AXP2XX_TEMP,
215         AXP2XX_BATVOLT,
216         AXP2XX_BATCHARGECURRENT,
217         AXP2XX_BATDISCHARGECURRENT,
218 };
219
220 enum axp2xx_regulators {
221         AXP209_REG_ID_DCDC2,
222         AXP209_REG_ID_DCDC3,
223         AXP209_REG_ID_LDO1,
224         AXP209_REG_ID_LDO2,
225         AXP209_REG_ID_LDO3,
226         /* LDO4 is weird, need to find a correct way to handle it */
227         /* AXP209_REG_ID_LDO4, */
228         AXP209_REG_ID_LDO5,
229         AXP221_REG_ID_DLDO1,
230         AXP221_REG_ID_DLDO2,
231         AXP221_REG_ID_DLDO3,
232         AXP221_REG_ID_DLDO4,
233         AXP221_REG_ID_ELDO1,
234         AXP221_REG_ID_ELDO2,
235         AXP221_REG_ID_ELDO3,
236         AXP221_REG_ID_DC5LDO,
237         AXP221_REG_ID_DCDC1,
238         AXP221_REG_ID_DCDC2,
239         AXP221_REG_ID_DCDC3,
240         AXP221_REG_ID_DCDC4,
241         AXP221_REG_ID_DCDC5,
242         AXP221_REG_ID_ALDO1,
243         AXP221_REG_ID_ALDO2,
244         AXP221_REG_ID_ALDO3,
245         AXP221_REG_ID_DC1SW,
246 };
247
248 #endif /* _AXP209REG_H_ */