2 * Copyright (c) 1994-1998 Mark Brinicombe.
3 * Copyright (c) 1994 Brini.
6 * This code is derived from software written for Brini by Mark Brinicombe
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by Brini.
19 * 4. The name of the company nor the name of the author may be used to
20 * endorse or promote products derived from this software without specific
21 * prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED
24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
26 * IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
27 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
29 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * RiscBSD kernel project
39 * Machine dependent functions for kernel setup
41 * This file needs a lot of work.
46 #include "opt_kstack_pages.h"
47 #include "opt_platform.h"
49 #include <sys/cdefs.h>
50 __FBSDID("$FreeBSD$");
52 #define _ARM32_BUS_DMA_PRIVATE
53 #include <sys/param.h>
54 #include <sys/systm.h>
55 #include <sys/sysproto.h>
56 #include <sys/signalvar.h>
57 #include <sys/imgact.h>
58 #include <sys/kernel.h>
60 #include <sys/linker.h>
62 #include <sys/malloc.h>
63 #include <sys/mutex.h>
66 #include <sys/ptrace.h>
73 #include <sys/msgbuf.h>
74 #include <sys/devmap.h>
75 #include <machine/physmem.h>
76 #include <machine/reg.h>
77 #include <machine/cpu.h>
78 #include <machine/board.h>
82 #include <vm/vm_object.h>
83 #include <vm/vm_page.h>
84 #include <vm/vm_map.h>
85 #include <machine/vmparam.h>
86 #include <machine/pcb.h>
87 #include <machine/undefined.h>
88 #include <machine/machdep.h>
89 #include <machine/metadata.h>
90 #include <machine/armreg.h>
91 #include <machine/bus.h>
92 #include <sys/reboot.h>
94 #include <arm/at91/at91board.h>
95 #include <arm/at91/at91var.h>
96 #include <arm/at91/at91soc.h>
97 #include <arm/at91/at91_usartreg.h>
98 #include <arm/at91/at91rm92reg.h>
99 #include <arm/at91/at91sam9g20reg.h>
100 #include <arm/at91/at91sam9g45reg.h>
106 /* Page table for mapping proc0 zero page */
107 #define KERNEL_PT_SYS 0
108 #define KERNEL_PT_KERN 1
109 #define KERNEL_PT_KERN_NUM 22
110 /* L2 table for mapping after kernel */
111 #define KERNEL_PT_AFKERNEL KERNEL_PT_KERN + KERNEL_PT_KERN_NUM
112 #define KERNEL_PT_AFKERNEL_NUM 5
114 /* this should be evenly divisable by PAGE_SIZE / L2_TABLE_SIZE_REAL (or 4) */
115 #define NUM_KERNEL_PTS (KERNEL_PT_AFKERNEL + KERNEL_PT_AFKERNEL_NUM)
117 struct pv_addr kernel_pt_table[NUM_KERNEL_PTS];
119 /* Static device mappings. */
120 const struct devmap_entry at91_devmap[] = {
122 * Map the critical on-board devices. The interrupt vector at
123 * 0xffff0000 makes it impossible to map them PA == VA, so we map all
124 * 0xfffxxxxx addresses to 0xdffxxxxx. This covers all critical devices
125 * on all members of the AT91SAM9 and AT91RM9200 families.
132 /* There's a notion that we should do the rest of these lazily. */
134 * We can't just map the OHCI registers VA == PA, because
135 * AT91xx_xxx_BASE belongs to the userland address space.
136 * We could just choose a different virtual address, but a better
137 * solution would probably be to just use pmap_mapdev() to allocate
138 * KVA, as we don't need the OHCI controller before the vm
139 * initialization is done. However, the AT91 resource allocation
140 * system doesn't know how to use pmap_mapdev() yet.
141 * Care must be taken to ensure PA and VM address do not overlap
146 * Add the ohci controller, and anything else that might be
147 * on this chip select for a VA/PA mapping.
149 /* Internal Memory 1MB */
150 AT91RM92_OHCI_VA_BASE,
155 /* CompactFlash controller. Portion of EBI CS4 1MB */
161 * The next two should be good for the 9260, 9261 and 9G20 since
162 * addresses mapping is the same.
165 /* Internal Memory 1MB */
166 AT91SAM9G20_OHCI_VA_BASE,
167 AT91SAM9G20_OHCI_BASE,
172 AT91SAM9G20_NAND_VA_BASE,
173 AT91SAM9G20_NAND_BASE,
174 AT91SAM9G20_NAND_SIZE,
177 * The next should be good for the 9G45.
180 /* Internal Memory 1MB */
181 AT91SAM9G45_OHCI_VA_BASE,
182 AT91SAM9G45_OHCI_BASE,
188 #ifdef LINUX_BOOT_ABI
190 static int memsize[];
196 uint32_t cr, mdr, mr, *SDRAMC;
197 int banks, rows, cols, bw;
198 #ifdef LINUX_BOOT_ABI
200 * If we found any ATAGs that were for memory, return the first bank.
206 if (at91_is_rm92()) {
207 SDRAMC = (uint32_t *)(AT91_BASE + AT91RM92_SDRAMC_BASE);
208 cr = SDRAMC[AT91RM92_SDRAMC_CR / 4];
209 mr = SDRAMC[AT91RM92_SDRAMC_MR / 4];
210 banks = (cr & AT91RM92_SDRAMC_CR_NB_4) ? 2 : 1;
211 rows = ((cr & AT91RM92_SDRAMC_CR_NR_MASK) >> 2) + 11;
212 cols = (cr & AT91RM92_SDRAMC_CR_NC_MASK) + 8;
213 bw = (mr & AT91RM92_SDRAMC_MR_DBW_16) ? 1 : 2;
214 } else if (at91_cpu_is(AT91_T_SAM9G45)) {
215 SDRAMC = (uint32_t *)(AT91_BASE + AT91SAM9G45_DDRSDRC0_BASE);
216 cr = SDRAMC[AT91SAM9G45_DDRSDRC_CR / 4];
217 mdr = SDRAMC[AT91SAM9G45_DDRSDRC_MDR / 4];
219 rows = ((cr & AT91SAM9G45_DDRSDRC_CR_NR_MASK) >> 2) + 11;
220 cols = (cr & AT91SAM9G45_DDRSDRC_CR_NC_MASK) + 8;
221 bw = (mdr & AT91SAM9G45_DDRSDRC_MDR_DBW_16) ? 1 : 2;
223 /* Fix the calculation for DDR memory */
224 mdr &= AT91SAM9G45_DDRSDRC_MDR_MASK;
225 if (mdr & AT91SAM9G45_DDRSDRC_MDR_LPDDR1 ||
226 mdr & AT91SAM9G45_DDRSDRC_MDR_DDR2) {
227 /* The cols value is 1 higher for DDR */
229 /* DDR has 4 internal banks. */
234 * This should be good for the 9260, 9261, 9G20, 9G35 and 9X25
235 * as addresses and registers are the same.
237 SDRAMC = (uint32_t *)(AT91_BASE + AT91SAM9G20_SDRAMC_BASE);
238 cr = SDRAMC[AT91SAM9G20_SDRAMC_CR / 4];
239 mr = SDRAMC[AT91SAM9G20_SDRAMC_MR / 4];
240 banks = (cr & AT91SAM9G20_SDRAMC_CR_NB_4) ? 2 : 1;
241 rows = ((cr & AT91SAM9G20_SDRAMC_CR_NR_MASK) >> 2) + 11;
242 cols = (cr & AT91SAM9G20_SDRAMC_CR_NC_MASK) + 8;
243 bw = (cr & AT91SAM9G20_SDRAMC_CR_DBW_16) ? 1 : 2;
246 return (1 << (cols + rows + banks + bw));
249 static const char *soc_type_name[] = {
250 [AT91_T_CAP9] = "at91cap9",
251 [AT91_T_RM9200] = "at91rm9200",
252 [AT91_T_SAM9260] = "at91sam9260",
253 [AT91_T_SAM9261] = "at91sam9261",
254 [AT91_T_SAM9263] = "at91sam9263",
255 [AT91_T_SAM9G10] = "at91sam9g10",
256 [AT91_T_SAM9G20] = "at91sam9g20",
257 [AT91_T_SAM9G45] = "at91sam9g45",
258 [AT91_T_SAM9N12] = "at91sam9n12",
259 [AT91_T_SAM9RL] = "at91sam9rl",
260 [AT91_T_SAM9X5] = "at91sam9x5",
261 [AT91_T_NONE] = "UNKNOWN"
264 static const char *soc_subtype_name[] = {
265 [AT91_ST_NONE] = "UNKNOWN",
266 [AT91_ST_RM9200_BGA] = "at91rm9200_bga",
267 [AT91_ST_RM9200_PQFP] = "at91rm9200_pqfp",
268 [AT91_ST_SAM9XE] = "at91sam9xe",
269 [AT91_ST_SAM9G45] = "at91sam9g45",
270 [AT91_ST_SAM9M10] = "at91sam9m10",
271 [AT91_ST_SAM9G46] = "at91sam9g46",
272 [AT91_ST_SAM9M11] = "at91sam9m11",
273 [AT91_ST_SAM9G15] = "at91sam9g15",
274 [AT91_ST_SAM9G25] = "at91sam9g25",
275 [AT91_ST_SAM9G35] = "at91sam9g35",
276 [AT91_ST_SAM9X25] = "at91sam9x25",
277 [AT91_ST_SAM9X35] = "at91sam9x35",
280 struct at91_soc_info soc_info;
283 * Read the SoC ID from the CIDR register and try to match it against the
284 * values we know. If we find a good one, we return true. If not, we
285 * return false. When we find a good one, we also find the subtype
289 at91_try_id(uint32_t dbgu_base)
293 soc_info.cidr = *(volatile uint32_t *)(AT91_BASE + dbgu_base +
295 socid = soc_info.cidr & ~AT91_CPU_VERSION_MASK;
297 soc_info.type = AT91_T_NONE;
298 soc_info.subtype = AT91_ST_NONE;
299 soc_info.family = (soc_info.cidr & AT91_CPU_FAMILY_MASK) >> 20;
300 soc_info.exid = *(volatile uint32_t *)(AT91_BASE + dbgu_base +
305 soc_info.type = AT91_T_CAP9;
307 case AT91_CPU_RM9200:
308 soc_info.type = AT91_T_RM9200;
310 case AT91_CPU_SAM9XE128:
311 case AT91_CPU_SAM9XE256:
312 case AT91_CPU_SAM9XE512:
313 case AT91_CPU_SAM9260:
314 soc_info.type = AT91_T_SAM9260;
315 if (soc_info.family == AT91_FAMILY_SAM9XE)
316 soc_info.subtype = AT91_ST_SAM9XE;
318 case AT91_CPU_SAM9261:
319 soc_info.type = AT91_T_SAM9261;
321 case AT91_CPU_SAM9263:
322 soc_info.type = AT91_T_SAM9263;
324 case AT91_CPU_SAM9G10:
325 soc_info.type = AT91_T_SAM9G10;
327 case AT91_CPU_SAM9G20:
328 soc_info.type = AT91_T_SAM9G20;
330 case AT91_CPU_SAM9G45:
331 soc_info.type = AT91_T_SAM9G45;
333 case AT91_CPU_SAM9N12:
334 soc_info.type = AT91_T_SAM9N12;
336 case AT91_CPU_SAM9RL64:
337 soc_info.type = AT91_T_SAM9RL;
339 case AT91_CPU_SAM9X5:
340 soc_info.type = AT91_T_SAM9X5;
346 switch (soc_info.type) {
348 switch (soc_info.exid) {
349 case AT91_EXID_SAM9G45:
350 soc_info.subtype = AT91_ST_SAM9G45;
352 case AT91_EXID_SAM9G46:
353 soc_info.subtype = AT91_ST_SAM9G46;
355 case AT91_EXID_SAM9M10:
356 soc_info.subtype = AT91_ST_SAM9M10;
358 case AT91_EXID_SAM9M11:
359 soc_info.subtype = AT91_ST_SAM9M11;
364 switch (soc_info.exid) {
365 case AT91_EXID_SAM9G15:
366 soc_info.subtype = AT91_ST_SAM9G15;
368 case AT91_EXID_SAM9G25:
369 soc_info.subtype = AT91_ST_SAM9G25;
371 case AT91_EXID_SAM9G35:
372 soc_info.subtype = AT91_ST_SAM9G35;
374 case AT91_EXID_SAM9X25:
375 soc_info.subtype = AT91_ST_SAM9X25;
377 case AT91_EXID_SAM9X35:
378 soc_info.subtype = AT91_ST_SAM9X35;
386 * Disable interrupts in the DBGU unit...
388 *(volatile uint32_t *)(AT91_BASE + dbgu_base + USART_IDR) = 0xffffffff;
391 * Save the name for later...
393 snprintf(soc_info.name, sizeof(soc_info.name), "%s%s%s",
394 soc_type_name[soc_info.type],
395 soc_info.subtype == AT91_ST_NONE ? "" : " subtype ",
396 soc_info.subtype == AT91_ST_NONE ? "" :
397 soc_subtype_name[soc_info.subtype]);
400 * try to get the matching CPU support.
402 soc_info.soc_data = at91_match_soc(soc_info.type, soc_info.subtype);
403 soc_info.dbgu_base = AT91_BASE + dbgu_base;
412 if (!at91_try_id(AT91_DBGU0))
413 at91_try_id(AT91_DBGU1);
416 #ifdef ARM_MANY_BOARD
417 /* likely belongs in arm/arm/machdep.c, but since board_init is still at91 only... */
418 SET_DECLARE(arm_board_set, const struct arm_board);
420 /* Not yet fully functional, but enough to build ATMEL config */
429 /* Physical and virtual addresses for some global pages */
431 struct pv_addr msgbufpv;
432 struct pv_addr kernelstack;
433 struct pv_addr systempage;
434 struct pv_addr irqstack;
435 struct pv_addr abtstack;
436 struct pv_addr undstack;
439 initarm(struct arm_boot_params *abp)
441 struct pv_addr kernel_l1pt;
442 struct pv_addr dpcpu;
445 vm_offset_t freemempos;
446 vm_offset_t afterkern;
448 vm_offset_t lastaddr;
450 lastaddr = parse_boot_param(abp);
451 arm_physmem_kernaddr = abp->abp_physaddr;
455 /* Do basic tuning, hz etc */
458 freemempos = (lastaddr + PAGE_MASK) & ~PAGE_MASK;
459 /* Define a macro to simplify memory allocation */
460 #define valloc_pages(var, np) \
461 alloc_pages((var).pv_va, (np)); \
462 (var).pv_pa = (var).pv_va + (abp->abp_physaddr - KERNVIRTADDR);
464 #define alloc_pages(var, np) \
465 (var) = freemempos; \
466 freemempos += (np * PAGE_SIZE); \
467 memset((char *)(var), 0, ((np) * PAGE_SIZE));
469 while (((freemempos - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) != 0)
470 freemempos += PAGE_SIZE;
471 valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
472 for (i = 0; i < NUM_KERNEL_PTS; ++i) {
473 if (!(i % (PAGE_SIZE / L2_TABLE_SIZE_REAL))) {
474 valloc_pages(kernel_pt_table[i],
475 L2_TABLE_SIZE / PAGE_SIZE);
477 kernel_pt_table[i].pv_va = freemempos -
478 (i % (PAGE_SIZE / L2_TABLE_SIZE_REAL)) *
480 kernel_pt_table[i].pv_pa =
481 kernel_pt_table[i].pv_va - KERNVIRTADDR +
486 * Allocate a page for the system page mapped to 0x00000000
487 * or 0xffff0000. This page will just contain the system vectors
488 * and can be shared by all processes.
490 valloc_pages(systempage, 1);
492 /* Allocate dynamic per-cpu area. */
493 valloc_pages(dpcpu, DPCPU_SIZE / PAGE_SIZE);
494 dpcpu_init((void *)dpcpu.pv_va, 0);
496 /* Allocate stacks for all modes */
497 valloc_pages(irqstack, IRQ_STACK_SIZE * MAXCPU);
498 valloc_pages(abtstack, ABT_STACK_SIZE * MAXCPU);
499 valloc_pages(undstack, UND_STACK_SIZE * MAXCPU);
500 valloc_pages(kernelstack, kstack_pages * MAXCPU);
501 valloc_pages(msgbufpv, round_page(msgbufsize) / PAGE_SIZE);
504 * Now we start construction of the L1 page table
505 * We start by mapping the L2 page tables into the L1.
506 * This means that we can replace L1 mappings later on if necessary
508 l1pagetable = kernel_l1pt.pv_va;
510 /* Map the L2 pages tables in the L1 page table */
511 pmap_link_l2pt(l1pagetable, ARM_VECTORS_HIGH,
512 &kernel_pt_table[KERNEL_PT_SYS]);
513 for (i = 0; i < KERNEL_PT_KERN_NUM; i++)
514 pmap_link_l2pt(l1pagetable, KERNBASE + i * L1_S_SIZE,
515 &kernel_pt_table[KERNEL_PT_KERN + i]);
516 pmap_map_chunk(l1pagetable, KERNBASE, PHYSADDR,
517 rounddown2(((uint32_t)lastaddr - KERNBASE) + PAGE_SIZE, PAGE_SIZE),
518 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
519 afterkern = round_page(rounddown2(lastaddr + L1_S_SIZE, L1_S_SIZE));
520 for (i = 0; i < KERNEL_PT_AFKERNEL_NUM; i++) {
521 pmap_link_l2pt(l1pagetable, afterkern + i * L1_S_SIZE,
522 &kernel_pt_table[KERNEL_PT_AFKERNEL + i]);
525 /* Map the vector page. */
526 pmap_map_entry(l1pagetable, ARM_VECTORS_HIGH, systempage.pv_pa,
527 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
529 /* Map the DPCPU pages */
530 pmap_map_chunk(l1pagetable, dpcpu.pv_va, dpcpu.pv_pa, DPCPU_SIZE,
531 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
533 /* Map the stack pages */
534 pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
535 IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
536 pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
537 ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
538 pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
539 UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
540 pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
541 kstack_pages * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
543 pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
544 L1_TABLE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
545 pmap_map_chunk(l1pagetable, msgbufpv.pv_va, msgbufpv.pv_pa,
546 msgbufsize, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
548 for (i = 0; i < NUM_KERNEL_PTS; ++i) {
549 pmap_map_chunk(l1pagetable, kernel_pt_table[i].pv_va,
550 kernel_pt_table[i].pv_pa, L2_TABLE_SIZE,
551 VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
554 devmap_bootstrap(l1pagetable, at91_devmap);
555 cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL * 2)) | DOMAIN_CLIENT);
556 cpu_setttb(kernel_l1pt.pv_pa);
558 cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL * 2));
563 * Initialize all the clocks, so that the console can work. We can only
564 * do this if at91_soc_id() was able to fill in the support data. Even
565 * if we can't init the clocks, still try to do a console init so we can
566 * try to print the error message about missing soc support. There's a
567 * chance the printf will work if the bootloader set up the DBGU.
569 if (soc_info.soc_data != NULL) {
570 soc_info.soc_data->soc_clock_init();
571 at91_pmc_init_clock();
576 if (soc_info.soc_data == NULL)
577 printf("Warning: No soc support for %s found.\n", soc_info.name);
579 memsize = board_init();
581 printf("board_init() failed, cannot determine ram size; "
583 memsize = 16 * 1024 * 1024;
586 /* Enable MMU (set SCTLR), and do other cpu-specific setup. */
587 cpu_control(CPU_CONTROL_MMU_ENABLE, CPU_CONTROL_MMU_ENABLE);
591 * Pages were allocated during the secondary bootstrap for the
592 * stacks for different CPU modes.
593 * We must now set the r13 registers in the different CPU modes to
594 * point to these stacks.
595 * Since the ARM stacks use STMFD etc. we must set r13 to the top end
596 * of the stack memory.
601 * We must now clean the cache again....
602 * Cleaning may be done by reading new data to displace any
603 * dirty data in the cache. This will have happened in cpu_setttb()
604 * but since we are boot strapping the addresses used for the read
605 * may have just been remapped and thus the cache could be out
606 * of sync. A re-clean after the switch will cure this.
607 * After booting there are no gross relocations of the kernel thus
608 * this problem will not occur after initarm().
610 cpu_idcache_wbinv_all();
614 init_proc0(kernelstack.pv_va);
616 arm_vector_init(ARM_VECTORS_HIGH, ARM_VEC_ALL);
618 pmap_curmaxkvaddr = afterkern + L1_S_SIZE * (KERNEL_PT_KERN_NUM - 1);
619 /* Always use the 256MB of KVA we have available between the kernel and devices */
620 vm_max_kernel_address = KERNVIRTADDR + (256 << 20);
621 pmap_bootstrap(freemempos, &kernel_l1pt);
622 msgbufp = (void*)msgbufpv.pv_va;
623 msgbufinit(msgbufp, msgbufsize);
627 * Add the physical ram we have available.
629 * Exclude the kernel, and all the things we allocated which immediately
630 * follow the kernel, from the VM allocation pool but not from crash
631 * dumps. virtual_avail is a global variable which tracks the kva we've
632 * "allocated" while setting up pmaps.
634 * Prepare the list of physical memory available to the vm subsystem.
636 arm_physmem_hardware_region(PHYSADDR, memsize);
637 arm_physmem_exclude_region(abp->abp_physaddr,
638 virtual_avail - KERNVIRTADDR, EXFLAG_NOALLOC);
639 arm_physmem_init_kernel_globals();
641 init_param2(physmem);
643 return ((void *)(kernelstack.pv_va + USPACE_SVC_STACK_TOP -
644 sizeof(struct pcb)));
649 * These functions are handled elsewhere, so make them nops here.
652 cpu_startprofclock(void)
658 cpu_stopprofclock(void)
673 if (soc_info.soc_data)
674 soc_info.soc_data->soc_delay(n);
681 if (soc_info.soc_data)
682 soc_info.soc_data->soc_reset();