2 * Copyright (c) 1994-1998 Mark Brinicombe.
3 * Copyright (c) 1994 Brini.
6 * This code is derived from software written for Brini by Mark Brinicombe
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by Brini.
19 * 4. The name of the company nor the name of the author may be used to
20 * endorse or promote products derived from this software without specific
21 * prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED
24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
26 * IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
27 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
29 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * RiscBSD kernel project
39 * Machine dependent functions for kernel setup
41 * This file needs a lot of work.
46 #include "opt_kstack_pages.h"
47 #include "opt_platform.h"
49 #include <sys/cdefs.h>
50 __FBSDID("$FreeBSD$");
52 #define _ARM32_BUS_DMA_PRIVATE
53 #include <sys/param.h>
54 #include <sys/systm.h>
55 #include <sys/sysproto.h>
56 #include <sys/signalvar.h>
57 #include <sys/imgact.h>
58 #include <sys/kernel.h>
60 #include <sys/linker.h>
62 #include <sys/malloc.h>
63 #include <sys/mutex.h>
66 #include <sys/ptrace.h>
73 #include <sys/msgbuf.h>
74 #include <sys/devmap.h>
75 #include <machine/physmem.h>
76 #include <machine/reg.h>
77 #include <machine/cpu.h>
78 #include <machine/board.h>
82 #include <vm/vm_object.h>
83 #include <vm/vm_page.h>
84 #include <vm/vm_map.h>
85 #include <machine/vmparam.h>
86 #include <machine/pcb.h>
87 #include <machine/undefined.h>
88 #include <machine/machdep.h>
89 #include <machine/metadata.h>
90 #include <machine/armreg.h>
91 #include <machine/bus.h>
92 #include <sys/reboot.h>
94 #include <arm/at91/at91board.h>
95 #include <arm/at91/at91var.h>
96 #include <arm/at91/at91soc.h>
97 #include <arm/at91/at91_usartreg.h>
98 #include <arm/at91/at91rm92reg.h>
99 #include <arm/at91/at91sam9g20reg.h>
100 #include <arm/at91/at91sam9g45reg.h>
106 /* Page table for mapping proc0 zero page */
107 #define KERNEL_PT_SYS 0
108 #define KERNEL_PT_KERN 1
109 #define KERNEL_PT_KERN_NUM 22
110 /* L2 table for mapping after kernel */
111 #define KERNEL_PT_AFKERNEL KERNEL_PT_KERN + KERNEL_PT_KERN_NUM
112 #define KERNEL_PT_AFKERNEL_NUM 5
114 /* this should be evenly divisable by PAGE_SIZE / L2_TABLE_SIZE_REAL (or 4) */
115 #define NUM_KERNEL_PTS (KERNEL_PT_AFKERNEL + KERNEL_PT_AFKERNEL_NUM)
117 struct pv_addr kernel_pt_table[NUM_KERNEL_PTS];
119 /* Static device mappings. */
120 const struct devmap_entry at91_devmap[] = {
122 * Map the critical on-board devices. The interrupt vector at
123 * 0xffff0000 makes it impossible to map them PA == VA, so we map all
124 * 0xfffxxxxx addresses to 0xdffxxxxx. This covers all critical devices
125 * on all members of the AT91SAM9 and AT91RM9200 families.
132 /* There's a notion that we should do the rest of these lazily. */
134 * We can't just map the OHCI registers VA == PA, because
135 * AT91xx_xxx_BASE belongs to the userland address space.
136 * We could just choose a different virtual address, but a better
137 * solution would probably be to just use pmap_mapdev() to allocate
138 * KVA, as we don't need the OHCI controller before the vm
139 * initialization is done. However, the AT91 resource allocation
140 * system doesn't know how to use pmap_mapdev() yet.
141 * Care must be taken to ensure PA and VM address do not overlap
146 * Add the ohci controller, and anything else that might be
147 * on this chip select for a VA/PA mapping.
149 /* Internal Memory 1MB */
150 AT91RM92_OHCI_VA_BASE,
155 /* CompactFlash controller. Portion of EBI CS4 1MB */
161 * The next two should be good for the 9260, 9261 and 9G20 since
162 * addresses mapping is the same.
165 /* Internal Memory 1MB */
166 AT91SAM9G20_OHCI_VA_BASE,
167 AT91SAM9G20_OHCI_BASE,
172 AT91SAM9G20_NAND_VA_BASE,
173 AT91SAM9G20_NAND_BASE,
174 AT91SAM9G20_NAND_SIZE,
177 * The next should be good for the 9G45.
180 /* Internal Memory 1MB */
181 AT91SAM9G45_OHCI_VA_BASE,
182 AT91SAM9G45_OHCI_BASE,
188 #ifdef LINUX_BOOT_ABI
190 extern int memstart[];
191 extern int memsize[];
197 uint32_t cr, mdr, mr, *SDRAMC;
198 int banks, rows, cols, bw;
199 #ifdef LINUX_BOOT_ABI
201 * If we found any ATAGs that were for memory, return the first bank.
207 if (at91_is_rm92()) {
208 SDRAMC = (uint32_t *)(AT91_BASE + AT91RM92_SDRAMC_BASE);
209 cr = SDRAMC[AT91RM92_SDRAMC_CR / 4];
210 mr = SDRAMC[AT91RM92_SDRAMC_MR / 4];
211 banks = (cr & AT91RM92_SDRAMC_CR_NB_4) ? 2 : 1;
212 rows = ((cr & AT91RM92_SDRAMC_CR_NR_MASK) >> 2) + 11;
213 cols = (cr & AT91RM92_SDRAMC_CR_NC_MASK) + 8;
214 bw = (mr & AT91RM92_SDRAMC_MR_DBW_16) ? 1 : 2;
215 } else if (at91_cpu_is(AT91_T_SAM9G45)) {
216 SDRAMC = (uint32_t *)(AT91_BASE + AT91SAM9G45_DDRSDRC0_BASE);
217 cr = SDRAMC[AT91SAM9G45_DDRSDRC_CR / 4];
218 mdr = SDRAMC[AT91SAM9G45_DDRSDRC_MDR / 4];
220 rows = ((cr & AT91SAM9G45_DDRSDRC_CR_NR_MASK) >> 2) + 11;
221 cols = (cr & AT91SAM9G45_DDRSDRC_CR_NC_MASK) + 8;
222 bw = (mdr & AT91SAM9G45_DDRSDRC_MDR_DBW_16) ? 1 : 2;
224 /* Fix the calculation for DDR memory */
225 mdr &= AT91SAM9G45_DDRSDRC_MDR_MASK;
226 if (mdr & AT91SAM9G45_DDRSDRC_MDR_LPDDR1 ||
227 mdr & AT91SAM9G45_DDRSDRC_MDR_DDR2) {
228 /* The cols value is 1 higher for DDR */
230 /* DDR has 4 internal banks. */
235 * This should be good for the 9260, 9261, 9G20, 9G35 and 9X25
236 * as addresses and registers are the same.
238 SDRAMC = (uint32_t *)(AT91_BASE + AT91SAM9G20_SDRAMC_BASE);
239 cr = SDRAMC[AT91SAM9G20_SDRAMC_CR / 4];
240 mr = SDRAMC[AT91SAM9G20_SDRAMC_MR / 4];
241 banks = (cr & AT91SAM9G20_SDRAMC_CR_NB_4) ? 2 : 1;
242 rows = ((cr & AT91SAM9G20_SDRAMC_CR_NR_MASK) >> 2) + 11;
243 cols = (cr & AT91SAM9G20_SDRAMC_CR_NC_MASK) + 8;
244 bw = (cr & AT91SAM9G20_SDRAMC_CR_DBW_16) ? 1 : 2;
247 return (1 << (cols + rows + banks + bw));
250 static const char *soc_type_name[] = {
251 [AT91_T_CAP9] = "at91cap9",
252 [AT91_T_RM9200] = "at91rm9200",
253 [AT91_T_SAM9260] = "at91sam9260",
254 [AT91_T_SAM9261] = "at91sam9261",
255 [AT91_T_SAM9263] = "at91sam9263",
256 [AT91_T_SAM9G10] = "at91sam9g10",
257 [AT91_T_SAM9G20] = "at91sam9g20",
258 [AT91_T_SAM9G45] = "at91sam9g45",
259 [AT91_T_SAM9N12] = "at91sam9n12",
260 [AT91_T_SAM9RL] = "at91sam9rl",
261 [AT91_T_SAM9X5] = "at91sam9x5",
262 [AT91_T_NONE] = "UNKNOWN"
265 static const char *soc_subtype_name[] = {
266 [AT91_ST_NONE] = "UNKNOWN",
267 [AT91_ST_RM9200_BGA] = "at91rm9200_bga",
268 [AT91_ST_RM9200_PQFP] = "at91rm9200_pqfp",
269 [AT91_ST_SAM9XE] = "at91sam9xe",
270 [AT91_ST_SAM9G45] = "at91sam9g45",
271 [AT91_ST_SAM9M10] = "at91sam9m10",
272 [AT91_ST_SAM9G46] = "at91sam9g46",
273 [AT91_ST_SAM9M11] = "at91sam9m11",
274 [AT91_ST_SAM9G15] = "at91sam9g15",
275 [AT91_ST_SAM9G25] = "at91sam9g25",
276 [AT91_ST_SAM9G35] = "at91sam9g35",
277 [AT91_ST_SAM9X25] = "at91sam9x25",
278 [AT91_ST_SAM9X35] = "at91sam9x35",
281 struct at91_soc_info soc_info;
284 * Read the SoC ID from the CIDR register and try to match it against the
285 * values we know. If we find a good one, we return true. If not, we
286 * return false. When we find a good one, we also find the subtype
290 at91_try_id(uint32_t dbgu_base)
294 soc_info.cidr = *(volatile uint32_t *)(AT91_BASE + dbgu_base +
296 socid = soc_info.cidr & ~AT91_CPU_VERSION_MASK;
298 soc_info.type = AT91_T_NONE;
299 soc_info.subtype = AT91_ST_NONE;
300 soc_info.family = (soc_info.cidr & AT91_CPU_FAMILY_MASK) >> 20;
301 soc_info.exid = *(volatile uint32_t *)(AT91_BASE + dbgu_base +
306 soc_info.type = AT91_T_CAP9;
308 case AT91_CPU_RM9200:
309 soc_info.type = AT91_T_RM9200;
311 case AT91_CPU_SAM9XE128:
312 case AT91_CPU_SAM9XE256:
313 case AT91_CPU_SAM9XE512:
314 case AT91_CPU_SAM9260:
315 soc_info.type = AT91_T_SAM9260;
316 if (soc_info.family == AT91_FAMILY_SAM9XE)
317 soc_info.subtype = AT91_ST_SAM9XE;
319 case AT91_CPU_SAM9261:
320 soc_info.type = AT91_T_SAM9261;
322 case AT91_CPU_SAM9263:
323 soc_info.type = AT91_T_SAM9263;
325 case AT91_CPU_SAM9G10:
326 soc_info.type = AT91_T_SAM9G10;
328 case AT91_CPU_SAM9G20:
329 soc_info.type = AT91_T_SAM9G20;
331 case AT91_CPU_SAM9G45:
332 soc_info.type = AT91_T_SAM9G45;
334 case AT91_CPU_SAM9N12:
335 soc_info.type = AT91_T_SAM9N12;
337 case AT91_CPU_SAM9RL64:
338 soc_info.type = AT91_T_SAM9RL;
340 case AT91_CPU_SAM9X5:
341 soc_info.type = AT91_T_SAM9X5;
347 switch (soc_info.type) {
349 switch (soc_info.exid) {
350 case AT91_EXID_SAM9G45:
351 soc_info.subtype = AT91_ST_SAM9G45;
353 case AT91_EXID_SAM9G46:
354 soc_info.subtype = AT91_ST_SAM9G46;
356 case AT91_EXID_SAM9M10:
357 soc_info.subtype = AT91_ST_SAM9M10;
359 case AT91_EXID_SAM9M11:
360 soc_info.subtype = AT91_ST_SAM9M11;
365 switch (soc_info.exid) {
366 case AT91_EXID_SAM9G15:
367 soc_info.subtype = AT91_ST_SAM9G15;
369 case AT91_EXID_SAM9G25:
370 soc_info.subtype = AT91_ST_SAM9G25;
372 case AT91_EXID_SAM9G35:
373 soc_info.subtype = AT91_ST_SAM9G35;
375 case AT91_EXID_SAM9X25:
376 soc_info.subtype = AT91_ST_SAM9X25;
378 case AT91_EXID_SAM9X35:
379 soc_info.subtype = AT91_ST_SAM9X35;
387 * Disable interrupts in the DBGU unit...
389 *(volatile uint32_t *)(AT91_BASE + dbgu_base + USART_IDR) = 0xffffffff;
392 * Save the name for later...
394 snprintf(soc_info.name, sizeof(soc_info.name), "%s%s%s",
395 soc_type_name[soc_info.type],
396 soc_info.subtype == AT91_ST_NONE ? "" : " subtype ",
397 soc_info.subtype == AT91_ST_NONE ? "" :
398 soc_subtype_name[soc_info.subtype]);
401 * try to get the matching CPU support.
403 soc_info.soc_data = at91_match_soc(soc_info.type, soc_info.subtype);
404 soc_info.dbgu_base = AT91_BASE + dbgu_base;
413 if (!at91_try_id(AT91_DBGU0))
414 at91_try_id(AT91_DBGU1);
417 #ifdef ARM_MANY_BOARD
418 /* likely belongs in arm/arm/machdep.c, but since board_init is still at91 only... */
419 SET_DECLARE(arm_board_set, const struct arm_board);
421 /* Not yet fully functional, but enough to build ATMEL config */
430 /* Physical and virtual addresses for some global pages */
432 struct pv_addr msgbufpv;
433 struct pv_addr kernelstack;
434 struct pv_addr systempage;
435 struct pv_addr irqstack;
436 struct pv_addr abtstack;
437 struct pv_addr undstack;
440 initarm(struct arm_boot_params *abp)
442 struct pv_addr kernel_l1pt;
443 struct pv_addr dpcpu;
446 vm_offset_t freemempos;
447 vm_offset_t afterkern;
449 vm_offset_t lastaddr;
451 lastaddr = parse_boot_param(abp);
452 arm_physmem_kernaddr = abp->abp_physaddr;
456 /* Do basic tuning, hz etc */
459 freemempos = (lastaddr + PAGE_MASK) & ~PAGE_MASK;
460 /* Define a macro to simplify memory allocation */
461 #define valloc_pages(var, np) \
462 alloc_pages((var).pv_va, (np)); \
463 (var).pv_pa = (var).pv_va + (abp->abp_physaddr - KERNVIRTADDR);
465 #define alloc_pages(var, np) \
466 (var) = freemempos; \
467 freemempos += (np * PAGE_SIZE); \
468 memset((char *)(var), 0, ((np) * PAGE_SIZE));
470 while (((freemempos - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) != 0)
471 freemempos += PAGE_SIZE;
472 valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
473 for (i = 0; i < NUM_KERNEL_PTS; ++i) {
474 if (!(i % (PAGE_SIZE / L2_TABLE_SIZE_REAL))) {
475 valloc_pages(kernel_pt_table[i],
476 L2_TABLE_SIZE / PAGE_SIZE);
478 kernel_pt_table[i].pv_va = freemempos -
479 (i % (PAGE_SIZE / L2_TABLE_SIZE_REAL)) *
481 kernel_pt_table[i].pv_pa =
482 kernel_pt_table[i].pv_va - KERNVIRTADDR +
487 * Allocate a page for the system page mapped to 0x00000000
488 * or 0xffff0000. This page will just contain the system vectors
489 * and can be shared by all processes.
491 valloc_pages(systempage, 1);
493 /* Allocate dynamic per-cpu area. */
494 valloc_pages(dpcpu, DPCPU_SIZE / PAGE_SIZE);
495 dpcpu_init((void *)dpcpu.pv_va, 0);
497 /* Allocate stacks for all modes */
498 valloc_pages(irqstack, IRQ_STACK_SIZE * MAXCPU);
499 valloc_pages(abtstack, ABT_STACK_SIZE * MAXCPU);
500 valloc_pages(undstack, UND_STACK_SIZE * MAXCPU);
501 valloc_pages(kernelstack, kstack_pages * MAXCPU);
502 valloc_pages(msgbufpv, round_page(msgbufsize) / PAGE_SIZE);
505 * Now we start construction of the L1 page table
506 * We start by mapping the L2 page tables into the L1.
507 * This means that we can replace L1 mappings later on if necessary
509 l1pagetable = kernel_l1pt.pv_va;
511 /* Map the L2 pages tables in the L1 page table */
512 pmap_link_l2pt(l1pagetable, ARM_VECTORS_HIGH,
513 &kernel_pt_table[KERNEL_PT_SYS]);
514 for (i = 0; i < KERNEL_PT_KERN_NUM; i++)
515 pmap_link_l2pt(l1pagetable, KERNBASE + i * L1_S_SIZE,
516 &kernel_pt_table[KERNEL_PT_KERN + i]);
517 pmap_map_chunk(l1pagetable, KERNBASE, PHYSADDR,
518 rounddown2(((uint32_t)lastaddr - KERNBASE) + PAGE_SIZE, PAGE_SIZE),
519 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
520 afterkern = round_page(rounddown2(lastaddr + L1_S_SIZE, L1_S_SIZE));
521 for (i = 0; i < KERNEL_PT_AFKERNEL_NUM; i++) {
522 pmap_link_l2pt(l1pagetable, afterkern + i * L1_S_SIZE,
523 &kernel_pt_table[KERNEL_PT_AFKERNEL + i]);
526 /* Map the vector page. */
527 pmap_map_entry(l1pagetable, ARM_VECTORS_HIGH, systempage.pv_pa,
528 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
530 /* Map the DPCPU pages */
531 pmap_map_chunk(l1pagetable, dpcpu.pv_va, dpcpu.pv_pa, DPCPU_SIZE,
532 VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
534 /* Map the stack pages */
535 pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
536 IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
537 pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
538 ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
539 pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
540 UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
541 pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
542 kstack_pages * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
544 pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
545 L1_TABLE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
546 pmap_map_chunk(l1pagetable, msgbufpv.pv_va, msgbufpv.pv_pa,
547 msgbufsize, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
549 for (i = 0; i < NUM_KERNEL_PTS; ++i) {
550 pmap_map_chunk(l1pagetable, kernel_pt_table[i].pv_va,
551 kernel_pt_table[i].pv_pa, L2_TABLE_SIZE,
552 VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
555 devmap_bootstrap(l1pagetable, at91_devmap);
556 cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL * 2)) | DOMAIN_CLIENT);
557 cpu_setttb(kernel_l1pt.pv_pa);
559 cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL * 2));
564 * Initialize all the clocks, so that the console can work. We can only
565 * do this if at91_soc_id() was able to fill in the support data. Even
566 * if we can't init the clocks, still try to do a console init so we can
567 * try to print the error message about missing soc support. There's a
568 * chance the printf will work if the bootloader set up the DBGU.
570 if (soc_info.soc_data != NULL) {
571 soc_info.soc_data->soc_clock_init();
572 at91_pmc_init_clock();
577 if (soc_info.soc_data == NULL)
578 printf("Warning: No soc support for %s found.\n", soc_info.name);
580 memsize = board_init();
582 printf("board_init() failed, cannot determine ram size; "
584 memsize = 16 * 1024 * 1024;
587 /* Enable MMU (set SCTLR), and do other cpu-specific setup. */
588 cpu_control(CPU_CONTROL_MMU_ENABLE, CPU_CONTROL_MMU_ENABLE);
592 * Pages were allocated during the secondary bootstrap for the
593 * stacks for different CPU modes.
594 * We must now set the r13 registers in the different CPU modes to
595 * point to these stacks.
596 * Since the ARM stacks use STMFD etc. we must set r13 to the top end
597 * of the stack memory.
602 * We must now clean the cache again....
603 * Cleaning may be done by reading new data to displace any
604 * dirty data in the cache. This will have happened in cpu_setttb()
605 * but since we are boot strapping the addresses used for the read
606 * may have just been remapped and thus the cache could be out
607 * of sync. A re-clean after the switch will cure this.
608 * After booting there are no gross relocations of the kernel thus
609 * this problem will not occur after initarm().
611 cpu_idcache_wbinv_all();
615 init_proc0(kernelstack.pv_va);
617 arm_vector_init(ARM_VECTORS_HIGH, ARM_VEC_ALL);
619 pmap_curmaxkvaddr = afterkern + L1_S_SIZE * (KERNEL_PT_KERN_NUM - 1);
620 /* Always use the 256MB of KVA we have available between the kernel and devices */
621 vm_max_kernel_address = KERNVIRTADDR + (256 << 20);
622 pmap_bootstrap(freemempos, &kernel_l1pt);
623 msgbufp = (void*)msgbufpv.pv_va;
624 msgbufinit(msgbufp, msgbufsize);
628 * Add the physical ram we have available.
630 * Exclude the kernel, and all the things we allocated which immediately
631 * follow the kernel, from the VM allocation pool but not from crash
632 * dumps. virtual_avail is a global variable which tracks the kva we've
633 * "allocated" while setting up pmaps.
635 * Prepare the list of physical memory available to the vm subsystem.
637 arm_physmem_hardware_region(PHYSADDR, memsize);
638 arm_physmem_exclude_region(abp->abp_physaddr,
639 virtual_avail - KERNVIRTADDR, EXFLAG_NOALLOC);
640 arm_physmem_init_kernel_globals();
642 init_param2(physmem);
644 return ((void *)(kernelstack.pv_va + USPACE_SVC_STACK_TOP -
645 sizeof(struct pcb)));
650 * These functions are handled elsewhere, so make them nops here.
653 cpu_startprofclock(void)
659 cpu_stopprofclock(void)
674 if (soc_info.soc_data)
675 soc_info.soc_data->soc_delay(n);
682 if (soc_info.soc_data)
683 soc_info.soc_data->soc_reset();