2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
5 * Ben Gray <ben.r.gray@gmail.com>.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/module.h>
38 #include <sys/resource.h>
41 #include <sys/mutex.h>
43 #include <machine/bus.h>
44 #include <machine/fdt.h>
45 #include <machine/resource.h>
46 #include <machine/intr.h>
48 #include <dev/fdt/simplebus.h>
49 #include <dev/fdt/fdt_common.h>
50 #include <dev/ofw/ofw_bus_subr.h>
52 #include <arm/ti/tivar.h>
53 #include <arm/ti/ti_cpuid.h>
55 #include <arm/ti/omap4/omap4_reg.h>
56 #include <arm/ti/am335x/am335x_reg.h>
58 #define OMAP4_STD_FUSE_DIE_ID_0 0x2200
59 #define OMAP4_ID_CODE 0x2204
60 #define OMAP4_STD_FUSE_DIE_ID_1 0x2208
61 #define OMAP4_STD_FUSE_DIE_ID_2 0x220C
62 #define OMAP4_STD_FUSE_DIE_ID_3 0x2210
63 #define OMAP4_STD_FUSE_PROD_ID_0 0x2214
64 #define OMAP4_STD_FUSE_PROD_ID_1 0x2218
66 #define OMAP3_ID_CODE 0xA204
68 static uint32_t chip_revision = 0xffffffff;
71 * ti_revision - Returns the revision number of the device
73 * Simply returns an identifier for the revision of the chip we are running
77 * A 32-bit identifier for the current chip
86 * omap4_get_revision - determines omap4 revision
88 * Reads the registers to determine the revision of the chip we are currently
89 * running on. Stores the information in global variables.
94 omap4_get_revision(void)
99 bus_space_handle_t bsh;
101 /* The chip revsion is read from the device identification registers and
102 * the JTAG (?) tap registers, which are located in address 0x4A00_2200 to
103 * 0x4A00_2218. This is part of the L4_CORE memory range and should have
104 * been mapped in by the machdep.c code.
106 * STD_FUSE_DIE_ID_0 0x4A00 2200
107 * ID_CODE 0x4A00 2204 (this is the only one we need)
108 * STD_FUSE_DIE_ID_1 0x4A00 2208
109 * STD_FUSE_DIE_ID_2 0x4A00 220C
110 * STD_FUSE_DIE_ID_3 0x4A00 2210
111 * STD_FUSE_PROD_ID_0 0x4A00 2214
112 * STD_FUSE_PROD_ID_1 0x4A00 2218
114 /* FIXME Should we map somewhere else? */
115 bus_space_map(fdtbus_bs_tag,OMAP44XX_L4_CORE_HWBASE, 0x4000, 0, &bsh);
116 id_code = bus_space_read_4(fdtbus_bs_tag, bsh, OMAP4_ID_CODE);
117 bus_space_unmap(fdtbus_bs_tag, bsh, 0x4000);
119 hawkeye = ((id_code >> 12) & 0xffff);
120 revision = ((id_code >> 28) & 0xf);
122 /* Apparently according to the linux code there were some ES2.0 samples that
123 * have the wrong id code and report themselves as ES1.0 silicon. So used
124 * the ARM cpuid to get the correct revision.
127 id_code = cpu_ident();
128 revision = (id_code & 0xf) - 1;
135 chip_revision = OMAP4430_REV_ES1_0;
138 chip_revision = OMAP4430_REV_ES2_1;
141 chip_revision = OMAP4430_REV_UNKNOWN;
149 chip_revision = OMAP4430_REV_ES2_1;
152 chip_revision = OMAP4430_REV_ES2_2;
155 chip_revision = OMAP4430_REV_ES2_3;
158 chip_revision = OMAP4430_REV_UNKNOWN;
166 chip_revision = OMAP4460_REV_ES1_0;
169 chip_revision = OMAP4460_REV_ES1_1;
172 chip_revision = OMAP4460_REV_UNKNOWN;
180 chip_revision = OMAP4470_REV_ES1_0;
183 chip_revision = OMAP4470_REV_UNKNOWN;
189 /* Default to the latest revision if we can't determine type */
190 chip_revision = OMAP_UNKNOWN_DEV;
193 if (chip_revision != OMAP_UNKNOWN_DEV) {
194 printf("Texas Instruments OMAP%04x Processor, Revision ES%u.%u\n",
195 OMAP_REV_DEVICE(chip_revision), OMAP_REV_MAJOR(chip_revision),
196 OMAP_REV_MINOR(chip_revision));
199 printf("Texas Instruments unknown OMAP chip: %04x, rev %d\n",
205 am335x_get_revision(void)
207 uint32_t dev_feature;
209 bus_space_handle_t bsh;
213 bus_space_map(fdtbus_bs_tag, AM335X_CONTROL_BASE, AM335X_CONTROL_SIZE, 0, &bsh);
214 chip_revision = bus_space_read_4(fdtbus_bs_tag, bsh, AM335X_CONTROL_DEVICE_ID);
215 dev_feature = bus_space_read_4(fdtbus_bs_tag, bsh, AM335X_CONTROL_DEV_FEATURE);
216 bus_space_unmap(fdtbus_bs_tag, bsh, AM335X_CONTROL_SIZE);
218 switch (dev_feature) {
241 switch(AM335X_DEVREV(chip_revision)) {
256 minor = AM335X_DEVREV(chip_revision);
259 printf("Texas Instruments AM335%c Processor, Revision ES%u.%u\n",
260 cpu_last_char, major, minor);
264 * ti_cpu_ident - attempts to identify the chip we are running on
267 * This function is called before any of the driver are initialised, however
268 * the basic virt to phys maps have been setup in machdep.c so we can still
269 * access the required registers, we just have to use direct register reads
270 * and writes rather than going through the bus stuff.
275 ti_cpu_ident(void *dummy)
277 if (!ti_soc_is_supported())
281 omap4_get_revision();
284 am335x_get_revision();
287 panic("Unknown chip type, fixme!\n");
291 SYSINIT(ti_cpu_ident, SI_SUB_CPU, SI_ORDER_SECOND, ti_cpu_ident, NULL);