2 * Copyright (c) 2013 Thomas Skibo. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 #include "opt_platform.h"
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 #include <sys/param.h>
30 #include <sys/systm.h>
33 #include <sys/mutex.h>
39 #include <machine/cpu.h>
40 #include <machine/smp.h>
41 #include <machine/fdt.h>
42 #include <machine/intr.h>
43 #include <machine/platformvar.h>
45 #include <arm/xilinx/zy7_machdep.h>
46 #include <arm/xilinx/zy7_reg.h>
47 #include <arm/xilinx/zy7_slcr.h>
49 #define ZYNQ7_CPU1_ENTRY 0xfffffff0
51 #define SCU_CONTROL_REG 0xf8f00000
52 #define SCU_CONTROL_ENABLE 1
53 #define SCU_CONFIG_REG 0xf8f00004
54 #define SCU_CONFIG_N_CPUS_MASK 3
56 #define SLCR_PSS_IDCODE 0xf8000530
59 zynq7_mp_setmaxid(platform_t plat)
61 bus_space_handle_t slcr_handle;
63 bus_space_handle_t scu_handle;
68 /* Map in SLCR PSS_IDCODE register. */
69 if (bus_space_map(fdtbus_bs_tag, SLCR_PSS_IDCODE, 4, 0,
71 panic("%s: Could not map SLCR IDCODE reg.\n", __func__);
73 device_id = bus_space_read_4(fdtbus_bs_tag, slcr_handle, 0) &
74 ZY7_SLCR_PSS_IDCODE_DEVICE_MASK;
76 bus_space_unmap(fdtbus_bs_tag, slcr_handle, 4);
79 * Zynq XC7z0xxS single core chips indicate incorrect number of CPUs in
80 * SCU configuration register.
82 if (device_id == ZY7_SLCR_PSS_IDCODE_DEVICE_7Z007S ||
83 device_id == ZY7_SLCR_PSS_IDCODE_DEVICE_7Z012S ||
84 device_id == ZY7_SLCR_PSS_IDCODE_DEVICE_7Z014S) {
90 /* Map in SCU config register. */
91 if (bus_space_map(fdtbus_bs_tag, SCU_CONFIG_REG, 4, 0,
93 panic("zynq7_mp_setmaxid: Could not map SCU config reg.\n");
95 mp_maxid = bus_space_read_4(fdtbus_bs_tag, scu_handle, 0) &
96 SCU_CONFIG_N_CPUS_MASK;
97 mp_ncpus = mp_maxid + 1;
99 bus_space_unmap(fdtbus_bs_tag, scu_handle, 4);
103 zynq7_mp_start_ap(platform_t plat)
105 bus_space_handle_t scu_handle;
106 bus_space_handle_t ocm_handle;
109 /* Map in SCU control register. */
110 if (bus_space_map(fdtbus_bs_tag, SCU_CONTROL_REG, 4,
111 0, &scu_handle) != 0)
112 panic("%s: Could not map SCU control reg.\n", __func__);
114 /* Set SCU enable bit. */
115 scu_ctrl = bus_space_read_4(fdtbus_bs_tag, scu_handle, 0);
116 scu_ctrl |= SCU_CONTROL_ENABLE;
117 bus_space_write_4(fdtbus_bs_tag, scu_handle, 0, scu_ctrl);
119 bus_space_unmap(fdtbus_bs_tag, scu_handle, 4);
121 /* Map in magic location to give entry address to CPU1. */
122 if (bus_space_map(fdtbus_bs_tag, ZYNQ7_CPU1_ENTRY, 4,
123 0, &ocm_handle) != 0)
124 panic("%s: Could not map OCM\n", __func__);
126 /* Write start address for CPU1. */
127 bus_space_write_4(fdtbus_bs_tag, ocm_handle, 0,
128 pmap_kextract((vm_offset_t)mpentry));
130 bus_space_unmap(fdtbus_bs_tag, ocm_handle, 4);
133 * The SCU is enabled above but I think the second CPU doesn't
134 * turn on filtering until after the wake-up below. I think that's why
135 * things don't work if I don't put these cache ops here. Also, the
136 * magic location, 0xfffffff0, isn't in the SCU's filtering range so it
137 * needs a write-back too.
139 dcache_wbinv_poc_all();