1 # This is loader.conf - a file full of useful variables that you can
2 # set to change the default load behavior of your system. You should
3 # not edit this file! Put any overrides into one of the
4 # loader_conf_files instead and you will be able to update these
5 # defaults later without spamming your local configuration information.
7 # All arguments must be in double quotes.
11 ##############################################################
12 ### Basic configuration options ############################
13 ##############################################################
15 exec="echo Loading /boot/defaults/loader.conf"
17 kernel="kernel" # /boot sub-directory containing kernel and modules
18 bootfile="kernel" # Kernel name (possibly absolute path)
19 kernel_options="" # Flags to be passed to the kernel
21 loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local"
22 nextboot_conf="/boot/nextboot.conf"
25 verbose_loading="NO" # Set to YES for verbose loader output
28 ##############################################################
29 ### Splash screen configuration ############################
30 ##############################################################
32 splash_bmp_load="NO" # Set this to YES for bmp splash screen!
33 splash_pcx_load="NO" # Set this to YES for pcx splash screen!
34 splash_txt_load="NO" # Set this to YES for TheDraw splash screen!
35 vesa_load="NO" # Set this to YES to load the vesa module
36 bitmap_load="NO" # Set this to YES if you want splash screen!
37 bitmap_name="splash.bmp" # Set this to the name of the file
38 bitmap_type="splash_image_data" # and place it on the module_path
41 ##############################################################
42 ### Random number generator configuration ##################
43 ##############################################################
45 # See rc.conf(5). The entropy_boot_file config variable must agree with the
48 entropy_cache_load="YES" # Set this to NO to disable loading
49 # entropy at boot time
50 entropy_cache_name="/boot/entropy" # Set this to the name of the file
51 entropy_cache_type="/boot/entropy" # Required for the kernel to find
52 # the boot-time entropy cache. This
53 # must not change value even if the
54 # _name above does change!
57 ##############################################################
58 ### RAM Blacklist configuration ############################
59 ##############################################################
61 ram_blacklist_load="NO" # Set this to YES to load a file
62 # containing a list of addresses to
63 # exclude from the running system.
64 ram_blacklist_name="/boot/blacklist.txt" # Set this to the name of the file
65 ram_blacklist_type="ram_blacklist" # Required for the kernel to find
66 # the blacklist module
69 ##############################################################
70 ### Initial memory disk settings ###########################
71 ##############################################################
73 #mdroot_load="YES" # The "mdroot" prefix is arbitrary.
74 #mdroot_type="md_image" # Create md(4) disk at boot.
75 #mdroot_name="/boot/root.img" # Path to a file containing the image.
76 #rootdev="ufs:/dev/md0" # Set the root filesystem to md(4) device.
79 ##############################################################
80 ### Loader settings ########################################
81 ##############################################################
83 #loader_delay="3" # Delay in seconds before loading anything.
84 # Default is unset and disabled (no delay).
85 #autoboot_delay="10" # Delay in seconds before autobooting,
86 # set to -1 if you don't want user to be
87 # allowed to interrupt autoboot process and
88 # escape to the loader prompt, set to
89 # "NO" to disable autobooting
90 #password="" # Prevent changes to boot options
91 #bootlock_password="" # Prevent booting (see check-password.4th(8))
92 #geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root
93 bootenv_autolist="YES" # Auto populate the list of ZFS Boot Environments
94 #beastie_disable="NO" # Turn the beastie boot menu on and off
95 #kernels="kernel kernel.old" # Kernels to display in the boot menu
96 #loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none
97 #comconsole_speed="9600" # Set the current serial console speed
98 #console="vidconsole" # A comma separated list of console(s)
99 #currdev="disk1s1a" # Set the current device
100 module_path="/boot/modules;/boot/dtb" # Set the module search path
101 #prompt="\\${interpret}" # Set the command prompt
102 #root_disk_unit="0" # Force the root disk unit number
103 #rootdev="disk1s1a" # Set the root filesystem
104 #dumpdev="disk1s1b" # Set a dump device early in the boot process
105 #tftp.blksize="1428" # Set the RFC 2348 TFTP block size.
106 # If the TFTP server does not support RFC 2348,
107 # the block size is set to 512. If the value
108 # is out of range ( < 8 || > 9008 ) an error is
110 #twiddle_divisor="1" # >1 means slow down the progress indicator.
113 ##############################################################
114 ### Kernel settings ########################################
115 ##############################################################
117 # The following boot_ variables are enabled by setting them to any value.
118 # Their presence in the kernel environment (see kenv(1)) has the same
119 # effect as setting the given boot flag (see boot(8)).
121 #boot_askname="" # -a: Prompt the user for the name of the root device
122 #boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM
123 #boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger
124 #boot_dfltroot="" # -r: Use the statically configured root file system
125 #boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger
126 #boot_multicons="" # -D: Use multiple consoles
127 #boot_mute="" # -m: Mute the console
128 #boot_pause="" # -p: Pause after each line during device probing
129 #boot_serial="" # -h: Use serial console
130 #boot_single="" # -s: Start system in single-user mode
131 #boot_verbose="" # -v: Causes extra debugging information to be printed
132 #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init"
133 # Sets the list of init candidates
134 #init_shell="/bin/sh" # The shell binary used by init(8).
135 #init_script="" # Initial script to run by init(8) before chrooting.
136 #init_chroot="" # Directory for init(8) to chroot into.
139 ##############################################################
140 ### Kernel tunables ########################################
141 ##############################################################
143 #hw.physmem="1G" # Limit physical memory. See loader(8)
144 #kern.dfldsiz="" # Set the initial data size limit
145 #kern.dflssiz="" # Set the initial stack size limit
146 #kern.hz="100" # Set the kernel interval timer rate
147 #kern.maxbcache="" # Set the max buffer cache KVA storage
148 #kern.maxdsiz="" # Set the max data size
149 #kern.maxfiles="" # Set the sys. wide open files limit
150 #kern.maxproc="" # Set the maximum # of processes
151 #kern.maxssiz="" # Set the max stack size
152 #kern.maxswzone="" # Set the max swmeta KVA storage
153 #kern.maxtsiz="" # Set the max text size
154 #kern.maxusers="32" # Set size of various static tables
155 #kern.msgbufsize="65536" # Set size of kernel message buffer
156 #kern.nbuf="" # Set the number of buffer headers
157 #kern.ncallout="" # Set the maximum # of timer events
158 #kern.ngroups="1023" # Set the maximum # of supplemental groups
159 #kern.sgrowsiz="" # Set the amount to grow stack
160 #kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus
161 # registration, useful for USB sticks as root
162 #kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI
163 #kern.ipc.maxsockets="" # Set the maximum number of sockets available
164 #kern.ipc.nmbclusters="" # Set the number of mbuf clusters
165 #kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs
166 #net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
167 #vfs.root.mountfrom="" # Specify root partition in a way the
169 #vm.kmem_size="" # Sets the size of kernel memory (bytes)
170 #debug.kdb.break_to_debugger="0" # Allow console to break into debugger.
171 #debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on
172 #debug.ktr.mask="0x1200" # Bitmask of KTR events to enable
173 #debug.ktr.verbose="1" # Enable console dump of KTR events
174 #net.graph.maxalloc="128" # Maximum number of queue items to allocate
177 ##############################################################
178 ### ATA modules ############################################
179 ##############################################################
181 ataacard_load="NO" # ACARD
182 ataacerlabs_load="NO" # Acer Labs Inc. (ALI)
183 ataamd_load="NO" # American Micro Devices (AMD)
184 ataati_load="NO" # ATI
185 atacenatek_load="NO" # Cenatek
186 atacypress_load="NO" # Cypress
187 atacyrix_load="NO" # Cyrix
188 atahighpoint_load="NO" # HighPoint
189 ataintel_load="NO" # Intel
190 ataite_load="NO" # Integrated Technology Inc. (ITE)
191 atajmicron_load="NO" # JMicron
192 atamarvell_load="NO" # Marvell
193 atamicron_load="NO" # Micron
194 atanational_load="NO" # National
195 atanetcell_load="NO" # NetCell
196 atanvidia_load="NO" # nVidia
197 atapromise_load="NO" # Promise
198 ataserverworks_load="NO" # ServerWorks
199 atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD)
200 atasis_load="NO" # Silicon Integrated Systems Corp.(SiS)
201 atavia_load="NO" # VIA Technologies Inc.
204 ##############################################################
205 ### Filesystem and related modules #########################
206 ##############################################################
210 cd9660_load="NO" # ISO 9660 filesystem
211 fdescfs_load="NO" # Filedescriptors filesystem
212 linprocfs_load="NO" # Linux compatibility process filesystem
213 linsysfs_load="NO" # Linux compatibility system filesystem
214 msdosfs_load="NO" # FAT-12/16/32
215 nfsclient_load="NO" # NFS client
216 nfsserver_load="NO" # NFS server
217 nullfs_load="NO" # Null filesystem
218 procfs_load="NO" # Process filesystem
219 unionfs_load="NO" # Union filesystem
224 geom_bde_load="NO" # Disk encryption driver (see gbde(4,8))
225 geom_ccd_load="NO" # Concatenated disk driver (see ccd(4),
227 geom_concat_load="NO" # Concatenated disk driver (see gconcat(8))
228 geom_eli_load="NO" # Disk encryption driver (see geli(8))
229 geom_gate_load="NO" # Userland disk driver (see geom_gate(4),
230 # ggatec(8), ggated(8), ggatel(8))
231 geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8))
232 geom_label_load="NO" # File system labels (see glabel(8))
233 geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see
234 # md(4), mdconfig(8))
235 geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8))
236 geom_mountver_load="NO" # Mount verification disk driver
237 geom_nop_load="NO" # Transparent disk driver (see gnop(8))
238 geom_raid3_load="NO" # RAID3 disk driver (see graid3(8))
239 geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8))
240 geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8))
241 geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8))
242 geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4))
245 ##############################################################
246 ### FireWire modules #######################################
247 ##############################################################
249 firewire_load="NO" # IEEE1394 High-performance Serial Bus
250 fwe_load="NO" # Ethernet emulation driver for FireWire
251 fwip_load="NO" # IP over FireWire driver
252 fwohci_load="NO" # OHCI FireWire chipset device driver
253 sbp_load="NO" # SBP-2 Mass Storage Devices driver
254 sbp_targ_load="NO" # SBP-2 Target mode
257 ##############################################################
258 ### Screen saver modules ###################################
259 ##############################################################
261 # This is best done in rc.conf
263 screensave_load="NO" # Set to YES to load a screensaver module
264 screensave_name="green_saver" # Set to the name of the screensaver module
267 ##############################################################
268 ### Emulation modules ######################################
269 ##############################################################
271 cloudabi_load="NO" # Platform independent CloudABI support
272 cloudabi64_load="NO" # 64-bit CloudABI executables support
273 ibcs2_load="NO" # IBCS2 (SCO) emulation
275 linux_load="NO" # Linux emulation
276 svr4_load="NO" # SystemV R4 emulation
277 streams_load="NO" # System V streams module
280 ##############################################################
281 ### Networking modules #####################################
282 ##############################################################
284 if_disc_load="NO" # Discard device
285 if_ef_load="NO" # pseudo-device providing support for multiple
286 # ethernet frame types
287 if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair
288 if_gif_load="NO" # generic tunnel interface
289 if_gre_load="NO" # encapsulating network device
290 if_stf_load="NO" # 6to4 tunnel interface
291 if_tap_load="NO" # Ethernet tunnel software network interface
292 if_tun_load="NO" # Tunnel driver (user process ppp)
293 if_vlan_load="NO" # IEEE 802.1Q VLAN network interface
294 ipfw_load="NO" # Firewall
295 pf_load="NO" # packet filter
298 ##############################################################
299 ### Networking drivers #####################################
300 ##############################################################
302 bridgestp_load="NO" # if_bridge(4) support
303 miibus_load="NO" # miibus support, needed for some drivers
304 carp_load="NO" # carp(4) protocol
305 if_ae_load="NO" # Attansic/Atheros L2 FastEthernet
306 if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet
307 if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet
308 if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet
309 if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs
310 if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs
311 if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet
312 if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet
313 if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet
314 if_bfe_load="NO" # Broadcom BCM4401
315 if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet
316 if_bnxt_load="NO" # Broadcom NetXtreme-C/NetXtreme-E
317 if_bridge_load="NO" # if_bridge(4) devices
318 if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs
319 if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs
320 if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet
321 if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn
322 if_cm_load="NO" # SMC (90c26, 90c56, 90c66)
323 if_cs_load="NO" # Crystal Semiconductor CS8920
324 if_cue_load="NO" # CATC USB-EL1210A USB Ethernet
325 if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet
326 if_cxgbe_load="NO" # Chelsio T4/T5/T6 1/10/25/40/100 Gigabit Ethernet
327 if_dc_load="NO" # DEC/Intel 21143 and various workalikes
328 if_de_load="NO" # DEC DC21x4x Ethernet
329 if_ed_load="NO" # National Semiconductor DS8390/WD83C690
331 if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
332 if_en_load="NO" # Midway-based ATM interfaces
333 if_ep_load="NO" # 3Com Etherlink III (3c5x9)
334 if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet
335 if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet
336 if_fatm_load="NO" # Fore PCA200E ATM
337 if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet
339 if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
340 if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC
341 if_hatm_load="NO" # Fore/Marconi HE155 and HE622
342 if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet
343 if_ie_load="NO" # Intel 82586
344 if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
345 if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless
346 if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG
348 if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless
349 if_ixgb_load="NO" # Intel PRO/10Gb Ethernet
350 if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express
351 if_ixl_load="NO" # Intel XL710 Ethernet 40Gb Base driver
352 if_ixlv_load="NO" # Intel XL710 Ethernet 40Gb VF driver
353 if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
354 if_lagg_load="NO" # lagg(4) devices
355 if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet
356 if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit
358 if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless
360 if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet
361 if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet
362 if_my_load="NO" # Myson PCI Fast Ethernet
363 if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter
364 if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet
365 if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet
366 if_patm_load="NO" # IDT77252 ATM
367 if_pcn_load="NO" # AMD PCnet PCI
368 if_ral_load="NO" # Ralink Technology wireless
369 if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S
370 if_rl_load="NO" # RealTek 8129/8139
371 if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet
372 if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless
373 if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless
374 if_sbni_load="NO" # Granch SBNI12 leased line adapters
375 if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
376 if_sge_load="NO" # Silicon Integrated Systems SiS 190/191
377 if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
378 if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet
379 if_sn_load="NO" # SMC 91Cxx
380 if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet
381 if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet
382 if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
383 if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
384 if_tx_load="NO" # SMC 83c17x Fast Ethernet
385 if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990)
386 if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet
387 if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet
388 if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX
389 if_udav_load="NO" # Davicom DM9601 USB Ethernet
390 if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless
391 if_ural_load="NO" # Ralink Technology USB wireless
392 if_urtw_load="NO" # Realtek 8187L USB wireless
393 if_vr_load="NO" # VIA Rhine I and Rhine II
394 if_vx_load="NO" # 3Com 3C590 family
395 if_wb_load="NO" # Winbond W89C840F
396 if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
397 if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11
398 if_xe_load="NO" # Xircom CreditCard PCMCIA
399 if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
400 sfxge_load="NO" # Solarflare 10Gb Ethernet adapter driver
401 utopia_load="NO" # ATM PHY driver
404 ##############################################################
405 ### Netgraph modules #######################################
406 ##############################################################
408 ng_UI_load="NO" # UI netgraph node type
409 ng_async_load="NO" # asynchronous framing netgraph node type
410 ng_bpf_load="NO" # Berkeley packet filter netgraph node type
411 ng_bridge_load="NO" # Ethernet bridging netgraph node type
412 ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type
413 ng_echo_load="NO" # Netgraph echo node type
414 ng_eiface_load="NO" # generic Ethernet interface netgraph node type
415 ng_etf_load="NO" # Ethertype filtering netgraph node type
416 ng_ether_load="NO" # Ethernet netgraph node type
417 ng_frame_relay_load="NO" # frame relay netgraph node type
418 ng_gif_load="NO" # generic tunnel interface netgraph node type
419 ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes
420 ng_hole_load="NO" # Netgraph discard node type
421 ng_hub_load="NO" # packet distribution netgraph node type
422 ng_iface_load="NO" # interface Netgraph node type
423 ng_ip_input_load="NO" # netgraph IP input node type
424 ng_ksocket_load="NO" # kernel socket netgraph node type
425 ng_l2tp_load="NO" # L2TP protocol netgraph node type
426 ng_lmi_load="NO" # frame relay LMI protocol netgraph node type
427 ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and
428 # encryption netgraph node type
429 ng_netflow_load="NO" # Cisco's NetFlow netgraph node type
430 ng_one2many_load="NO" # packet multiplexing netgraph node type
431 ng_ppp_load="NO" # PPP protocol netgraph node type
432 ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type
433 ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type
434 ng_rfc1490_load="NO" # RFC 1490 netgraph node type
435 ng_socket_load="NO" # Netgraph socket node type
436 ng_split_load="NO" # netgraph node to separate incoming and
438 ng_sppp_load="NO" # sppp netgraph node type
439 ng_tee_load="NO" # Netgraph ``tee'' node type
440 ng_tty_load="NO" # Netgraph node type that is also a line
442 ng_vjc_load="NO" # Van Jacobsen compression netgraph node type
443 ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type
446 ##############################################################
447 ### Sound modules ##########################################
448 ##############################################################
450 sound_load="NO" # Digital sound subsystem
451 snd_ad1816_load="NO" # ad1816
452 snd_als4000_load="NO" # als4000
453 snd_atiixp_load="NO" # atiixp
454 snd_cmi_load="NO" # cmi
455 snd_cs4281_load="NO" # cs4281
456 snd_csa_load="NO" # csa
457 snd_ds1_load="NO" # ds1
458 snd_emu10k1_load="NO" # Creative Sound Blaster Live
459 snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy
460 snd_envy24_load="NO" # VIA Envy24
461 snd_envy24ht_load="NO" # VIA Envy24HT
462 snd_es137x_load="NO" # es137x
463 snd_ess_load="NO" # ess
464 snd_fm801_load="NO" # fm801
465 snd_hda_load="NO" # Intel High Definition Audio (Controller)
466 snd_ich_load="NO" # Intel ICH
467 snd_maestro_load="NO" # Maestro
468 snd_maestro3_load="NO" # Maestro3
469 snd_mss_load="NO" # Mss
470 snd_neomagic_load="NO" # Neomagic
471 snd_sb16_load="NO" # Sound Blaster 16
472 snd_sb8_load="NO" # Sound Blaster Pro
473 snd_sbc_load="NO" # Sbc
474 snd_solo_load="NO" # Solo
475 snd_spicds_load="NO" # SPI codecs
476 snd_t4dwave_load="NO" # t4dwave
477 snd_via8233_load="NO" # via8233
478 snd_via82c686_load="NO" # via82c686
479 snd_vibes_load="NO" # vibes
480 snd_driver_load="NO" # All sound drivers
483 ##############################################################
484 ### USB modules ############################################
485 ##############################################################
487 usb_load="NO" # USB subsystem
488 udbp_load="NO" # USB double bulk pipe host 2 host cables
489 ugen_load="NO" # USB generic device, if all else fails ...
490 ucycom_load="NO" # Cyprus USB serial adapters
491 ufm_load="NO" # Fm Radio
492 uhid_load="NO" # Human Interface Devices
493 ukbd_load="NO" # Keyboard
494 ulpt_load="NO" # Printer
495 ums_load="NO" # Mouse
496 umass_load="NO" # Mass Storage Devices
497 umct_load="NO" # Magic Control Technology USB-RS232
498 umodem_load="NO" # Modems
499 uplcom_load="NO" # Prolific USB serial adapters
500 urio_load="NO" # Rio MP3 players
501 uvisor_load="NO" # PalmOS based PDAs
502 if_aue_load="NO" # ADMtek USB ethernet
503 if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet
504 if_cdce_load="NO" # Ethernet over USB (CDC)
505 if_cue_load="NO" # CATC USB ethernet
506 if_kue_load="NO" # Kawasaki LSI USB ethernet
507 if_rae_load="NO" # Realtek RTL8150 USB adapter.
508 if_rum_load="NO" # Ralink USB 802.11 wireless adapter
509 if_uath_load="NO" # Atheros AR5523 wireless adapter
510 if_run_load="NO" # Ralink USB 802.11 wireless adapter
511 if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter
512 if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter
513 snd_uaudio_load="NO" # USB audio
516 ##############################################################
517 ### Other modules ##########################################
518 ##############################################################
520 aio_load="NO" # Asynchronous I/O
521 bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
522 ispfw_load="NO" # Qlogic ISP Firmware
523 agp_load="NO" # agp module
524 accf_data_load="NO" # Wait for data accept filter
525 accf_dns_load="NO" # Wait for full DNS request accept filter
526 accf_http_load="NO" # Wait for full HTTP request accept filter
527 ppi_load="NO" # Interface to ppbus parallel 'geek' port
528 pps_load="NO" # Pulse per second devices
529 puc_load="NO" # PCI "Universal" Communications driver
530 random_load="NO" # Random device
531 speaker_load="NO" # AT speaker module
532 coretemp_load="NO" # Intel Core CPU temperature monitor
533 vkbd_load="NO" # Virtual AT keyboard interface
534 vpd_load="NO" # Vital Product Data kernel interface
535 vpo_load="NO" # Parallel to SCSI interface driver
536 amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor
537 tpm_load="NO" # Trusted Platform Module
538 wbwd_load="NO" # Winbond watchdog
541 ##############################################################
542 ### ACPI settings ##########################################
543 ##############################################################
545 acpi_dsdt_load="NO" # DSDT Overriding
546 acpi_dsdt_type="acpi_dsdt" # Don't change this
547 acpi_dsdt_name="/boot/acpi_dsdt.aml"
548 # Override DSDT in BIOS by this file
549 acpi_video_load="NO" # Load the ACPI video extension driver
552 ##############################################################
553 ### TrustedBSD MAC settings ################################
554 ##############################################################
556 mac_biba_load="NO" # Biba MAC policy
557 mac_bsdextended_load="NO" # BSD/extended MAC policy
558 mac_ifoff="NO" # Interface silencing policy
559 mac_mls_load="NO" # MLS MAC policy
560 mac_none_load="NO" # Null MAC policy
561 mac_partition_load="NO" # Partition MAC policy
562 mac_seeotheruids_load="NO" # UID visbility MAC policy
565 ##############################################################
566 ### Module loading syntax example ##########################
567 ##############################################################
569 #module_load="YES" # loads module "module"
570 #module_name="realname" # uses "realname" instead of "module"
571 #module_type="type" # passes "-t type" to load
572 #module_flags="flags" # passes "flags" to the module
573 #module_before="cmd" # executes "cmd" before loading the module
574 #module_after="cmd" # executes "cmd" after loading the module
575 #module_error="cmd" # executes "cmd" if load fails