2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer,
12 * without modification, immediately at the beginning of the file.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
34 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/kernel.h>
40 #include <sys/sysctl.h>
41 #include <sys/taskqueue.h>
43 #include <sys/mutex.h>
45 #include <sys/devicestat.h>
46 #include <sys/eventhandler.h>
47 #include <sys/malloc.h>
48 #include <sys/endian.h>
51 #include <sys/reboot.h>
53 #include <geom/geom_disk.h>
62 #include <cam/cam_ccb.h>
63 #include <cam/cam_periph.h>
64 #include <cam/cam_xpt_periph.h>
65 #include <cam/scsi/scsi_all.h>
66 #include <cam/scsi/scsi_da.h>
67 #include <cam/cam_sim.h>
68 #include <cam/cam_iosched.h>
70 #include <cam/ata/ata_all.h>
72 #include <machine/md_var.h> /* geometry translation */
76 #define ATA_MAX_28BIT_LBA 268435455UL
78 extern int iosched_debug;
91 ADA_FLAG_CAN_48BIT = 0x00000002,
92 ADA_FLAG_CAN_FLUSHCACHE = 0x00000004,
93 ADA_FLAG_CAN_NCQ = 0x00000008,
94 ADA_FLAG_CAN_DMA = 0x00000010,
95 ADA_FLAG_NEED_OTAG = 0x00000020,
96 ADA_FLAG_WAS_OTAG = 0x00000040,
97 ADA_FLAG_CAN_TRIM = 0x00000080,
98 ADA_FLAG_OPEN = 0x00000100,
99 ADA_FLAG_SCTX_INIT = 0x00000200,
100 ADA_FLAG_CAN_CFA = 0x00000400,
101 ADA_FLAG_CAN_POWERMGT = 0x00000800,
102 ADA_FLAG_CAN_DMA48 = 0x00001000,
103 ADA_FLAG_CAN_LOG = 0x00002000,
104 ADA_FLAG_CAN_IDLOG = 0x00004000,
105 ADA_FLAG_CAN_SUPCAP = 0x00008000,
106 ADA_FLAG_CAN_ZONE = 0x00010000,
107 ADA_FLAG_CAN_WCACHE = 0x00020000,
108 ADA_FLAG_CAN_RAHEAD = 0x00040000,
109 ADA_FLAG_PROBED = 0x00080000,
110 ADA_FLAG_ANNOUNCED = 0x00100000,
111 ADA_FLAG_DIRTY = 0x00200000,
112 ADA_FLAG_CAN_NCQ_TRIM = 0x00400000, /* CAN_TRIM also set */
113 ADA_FLAG_PIM_ATA_EXT = 0x00800000
119 ADA_Q_NCQ_TRIM_BROKEN = 0x02,
120 ADA_Q_LOG_BROKEN = 0x04,
124 #define ADA_Q_BIT_STRING \
127 "\002NCQ_TRIM_BROKEN" \
132 ADA_CCB_RAHEAD = 0x01,
133 ADA_CCB_WCACHE = 0x02,
134 ADA_CCB_BUFFER_IO = 0x03,
137 ADA_CCB_LOGDIR = 0x07,
138 ADA_CCB_IDDIR = 0x08,
139 ADA_CCB_SUP_CAP = 0x09,
141 ADA_CCB_TYPE_MASK = 0x0F,
145 ADA_ZONE_NONE = 0x00,
146 ADA_ZONE_DRIVE_MANAGED = 0x01,
147 ADA_ZONE_HOST_AWARE = 0x02,
148 ADA_ZONE_HOST_MANAGED = 0x03
152 ADA_ZONE_FLAG_RZ_SUP = 0x0001,
153 ADA_ZONE_FLAG_OPEN_SUP = 0x0002,
154 ADA_ZONE_FLAG_CLOSE_SUP = 0x0004,
155 ADA_ZONE_FLAG_FINISH_SUP = 0x0008,
156 ADA_ZONE_FLAG_RWP_SUP = 0x0010,
157 ADA_ZONE_FLAG_SUP_MASK = (ADA_ZONE_FLAG_RZ_SUP |
158 ADA_ZONE_FLAG_OPEN_SUP |
159 ADA_ZONE_FLAG_CLOSE_SUP |
160 ADA_ZONE_FLAG_FINISH_SUP |
161 ADA_ZONE_FLAG_RWP_SUP),
162 ADA_ZONE_FLAG_URSWRZ = 0x0020,
163 ADA_ZONE_FLAG_OPT_SEQ_SET = 0x0040,
164 ADA_ZONE_FLAG_OPT_NONSEQ_SET = 0x0080,
165 ADA_ZONE_FLAG_MAX_SEQ_SET = 0x0100,
166 ADA_ZONE_FLAG_SET_MASK = (ADA_ZONE_FLAG_OPT_SEQ_SET |
167 ADA_ZONE_FLAG_OPT_NONSEQ_SET |
168 ADA_ZONE_FLAG_MAX_SEQ_SET)
171 static struct ada_zone_desc {
172 ada_zone_flags value;
174 } ada_zone_desc_table[] = {
175 {ADA_ZONE_FLAG_RZ_SUP, "Report Zones" },
176 {ADA_ZONE_FLAG_OPEN_SUP, "Open" },
177 {ADA_ZONE_FLAG_CLOSE_SUP, "Close" },
178 {ADA_ZONE_FLAG_FINISH_SUP, "Finish" },
179 {ADA_ZONE_FLAG_RWP_SUP, "Reset Write Pointer" },
183 /* Offsets into our private area for storing information */
184 #define ccb_state ppriv_field0
185 #define ccb_bp ppriv_ptr1
190 ADA_DELETE_CFA_ERASE,
192 ADA_DELETE_NCQ_DSM_TRIM,
193 ADA_DELETE_MIN = ADA_DELETE_CFA_ERASE,
194 ADA_DELETE_MAX = ADA_DELETE_NCQ_DSM_TRIM,
195 } ada_delete_methods;
197 static const char *ada_delete_method_names[] =
198 { "NONE", "DISABLE", "CFA_ERASE", "DSM_TRIM", "NCQ_DSM_TRIM" };
200 static const char *ada_delete_method_desc[] =
201 { "NONE", "DISABLED", "CFA Erase", "DSM Trim", "DSM Trim via NCQ" };
206 u_int8_t secs_per_track;
208 u_int32_t secsize; /* Number of bytes/logical sector */
209 u_int64_t sectors; /* Total number sectors */
212 #define TRIM_MAX_BLOCKS 8
213 #define TRIM_MAX_RANGES (TRIM_MAX_BLOCKS * ATA_DSM_BLK_RANGES)
214 struct trim_request {
215 uint8_t data[TRIM_MAX_RANGES * ATA_DSM_RANGE_SIZE];
216 TAILQ_HEAD(, bio) bps;
220 struct cam_iosched_softc *cam_iosched;
221 int outstanding_cmds; /* Number of active commands */
222 int refcount; /* Active xpt_action() calls */
225 ada_zone_mode zone_mode;
226 ada_zone_flags zone_flags;
227 struct ata_gp_log_dir ata_logdir;
228 int valid_logdir_len;
229 struct ata_identify_log_pages ata_iddir;
231 uint64_t optimal_seq_zones;
232 uint64_t optimal_nonseq_zones;
233 uint64_t max_seq_zones;
235 ada_delete_methods delete_method;
241 #ifdef CAM_TEST_FAILURE
242 int force_read_error;
243 int force_write_error;
244 int periodic_read_error;
245 int periodic_read_count;
247 struct disk_params params;
249 struct task sysctl_task;
250 struct sysctl_ctx_list sysctl_ctx;
251 struct sysctl_oid *sysctl_tree;
252 struct callout sendordered_c;
253 struct trim_request trim_req;
255 struct sysctl_ctx_list sysctl_stats_ctx;
256 struct sysctl_oid *sysctl_stats_tree;
261 #define ADA_ANNOUNCETMP_SZ 80
262 char announce_temp[ADA_ANNOUNCETMP_SZ];
263 #define ADA_ANNOUNCE_SZ 400
264 char announce_buffer[ADA_ANNOUNCE_SZ];
267 struct ada_quirk_entry {
268 struct scsi_inquiry_pattern inq_pat;
272 static struct ada_quirk_entry ada_quirk_table[] =
275 /* Hitachi Advanced Format (4k) drives */
276 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Hitachi H??????????E3*", "*" },
280 /* Samsung Advanced Format (4k) drives */
281 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD155UI*", "*" },
285 /* Samsung Advanced Format (4k) drives */
286 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD204UI*", "*" },
290 /* Seagate Barracuda Green Advanced Format (4k) drives */
291 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST????DL*", "*" },
295 /* Seagate Barracuda Advanced Format (4k) drives */
296 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST???DM*", "*" },
300 /* Seagate Barracuda Advanced Format (4k) drives */
301 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST????DM*", "*" },
305 /* Seagate Momentus Advanced Format (4k) drives */
306 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9500423AS*", "*" },
310 /* Seagate Momentus Advanced Format (4k) drives */
311 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9500424AS*", "*" },
315 /* Seagate Momentus Advanced Format (4k) drives */
316 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9640423AS*", "*" },
320 /* Seagate Momentus Advanced Format (4k) drives */
321 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9640424AS*", "*" },
325 /* Seagate Momentus Advanced Format (4k) drives */
326 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9750420AS*", "*" },
330 /* Seagate Momentus Advanced Format (4k) drives */
331 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9750422AS*", "*" },
335 /* Seagate Momentus Advanced Format (4k) drives */
336 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9750423AS*", "*" },
340 /* Seagate Momentus Thin Advanced Format (4k) drives */
341 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST???LT*", "*" },
345 /* WDC Caviar Red Advanced Format (4k) drives */
346 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????CX*", "*" },
350 /* WDC Caviar Green Advanced Format (4k) drives */
351 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????RS*", "*" },
355 /* WDC Caviar Green/Red Advanced Format (4k) drives */
356 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????RX*", "*" },
360 /* WDC Caviar Red Advanced Format (4k) drives */
361 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD??????CX*", "*" },
365 /* WDC Caviar Black Advanced Format (4k) drives */
366 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????AZEX*", "*" },
370 /* WDC Caviar Black Advanced Format (4k) drives */
371 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????FZEX*", "*" },
375 /* WDC Caviar Green Advanced Format (4k) drives */
376 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD??????RS*", "*" },
380 /* WDC Caviar Green Advanced Format (4k) drives */
381 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD??????RX*", "*" },
385 /* WDC Scorpio Black Advanced Format (4k) drives */
386 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD???PKT*", "*" },
390 /* WDC Scorpio Black Advanced Format (4k) drives */
391 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD?????PKT*", "*" },
395 /* WDC Scorpio Blue Advanced Format (4k) drives */
396 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD???PVT*", "*" },
400 /* WDC Scorpio Blue Advanced Format (4k) drives */
401 { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD?????PVT*", "*" },
407 * Corsair Force 2 SSDs
408 * 4k optimised & trim only works in 4k requests + 4k aligned
410 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair CSSD-F*", "*" },
415 * Corsair Force 3 SSDs
416 * 4k optimised & trim only works in 4k requests + 4k aligned
418 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Force 3*", "*" },
423 * Corsair Neutron GTX SSDs
424 * 4k optimised & trim only works in 4k requests + 4k aligned
426 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Neutron GTX*", "*" },
431 * Corsair Force GT & GS SSDs
432 * 4k optimised & trim only works in 4k requests + 4k aligned
434 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Force G*", "*" },
440 * 4k optimised & trim only works in 4k requests + 4k aligned
442 { T_DIRECT, SIP_MEDIA_FIXED, "*", "M4-CT???M4SSD2*", "*" },
447 * Crucial M500 SSDs MU07 firmware
450 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*M500*", "MU07" },
455 * Crucial M500 SSDs all other firmware
456 * NCQ Trim doesn't work
458 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*M500*", "*" },
459 /*quirks*/ADA_Q_NCQ_TRIM_BROKEN
464 * NCQ Trim doesn't work, but only on MU01 firmware
466 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*M550*", "MU01" },
467 /*quirks*/ADA_Q_NCQ_TRIM_BROKEN
472 * NCQ Trim doesn't work, but only on MU01 firmware
474 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*MX100*", "MU01" },
475 /*quirks*/ADA_Q_NCQ_TRIM_BROKEN
479 * Crucial RealSSD C300 SSDs
482 { T_DIRECT, SIP_MEDIA_FIXED, "*", "C300-CTFDDAC???MAG*",
483 "*" }, /*quirks*/ADA_Q_4K
488 * NCQ Trim doesn't work
490 { T_DIRECT, SIP_MEDIA_FIXED, "*", "FCCT*M500*", "*" },
491 /*quirks*/ADA_Q_NCQ_TRIM_BROKEN
495 * Intel 320 Series SSDs
496 * 4k optimised & trim only works in 4k requests + 4k aligned
498 { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSA2CW*", "*" },
503 * Intel 330 Series SSDs
504 * 4k optimised & trim only works in 4k requests + 4k aligned
506 { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2CT*", "*" },
511 * Intel 510 Series SSDs
512 * 4k optimised & trim only works in 4k requests + 4k aligned
514 { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2MH*", "*" },
519 * Intel 520 Series SSDs
520 * 4k optimised & trim only works in 4k requests + 4k aligned
522 { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2BW*", "*" },
527 * Intel S3610 Series SSDs
528 * 4k optimised & trim only works in 4k requests + 4k aligned
530 { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2BX*", "*" },
535 * Intel X25-M Series SSDs
536 * 4k optimised & trim only works in 4k requests + 4k aligned
538 { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSA2M*", "*" },
543 * Kingston E100 Series SSDs
544 * 4k optimised & trim only works in 4k requests + 4k aligned
546 { T_DIRECT, SIP_MEDIA_FIXED, "*", "KINGSTON SE100S3*", "*" },
551 * Kingston HyperX 3k SSDs
552 * 4k optimised & trim only works in 4k requests + 4k aligned
554 { T_DIRECT, SIP_MEDIA_FIXED, "*", "KINGSTON SH103S3*", "*" },
559 * Marvell SSDs (entry taken from OpenSolaris)
560 * 4k optimised & trim only works in 4k requests + 4k aligned
562 { T_DIRECT, SIP_MEDIA_FIXED, "*", "MARVELL SD88SA02*", "*" },
567 * Micron M500 SSDs firmware MU07
570 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron M500*", "MU07" },
575 * Micron M500 SSDs all other firmware
576 * NCQ Trim doesn't work
578 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron M500*", "*" },
579 /*quirks*/ADA_Q_NCQ_TRIM_BROKEN
583 * Micron M5[15]0 SSDs
584 * NCQ Trim doesn't work, but only MU01 firmware
586 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron M5[15]0*", "MU01" },
587 /*quirks*/ADA_Q_NCQ_TRIM_BROKEN
592 * 4k optimised & trim only works in 4k requests + 4k aligned
594 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron 5100 MTFDDAK*", "*" },
600 * 4k optimised & trim only works in 4k requests + 4k aligned
602 { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-AGILITY2*", "*" },
608 * 4k optimised & trim only works in 4k requests + 4k aligned
610 { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-AGILITY3*", "*" },
615 * OCZ Deneva R Series SSDs
616 * 4k optimised & trim only works in 4k requests + 4k aligned
618 { T_DIRECT, SIP_MEDIA_FIXED, "*", "DENRSTE251M45*", "*" },
623 * OCZ Vertex 2 SSDs (inc pro series)
624 * 4k optimised & trim only works in 4k requests + 4k aligned
626 { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ?VERTEX2*", "*" },
632 * 4k optimised & trim only works in 4k requests + 4k aligned
634 { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-VERTEX3*", "*" },
640 * 4k optimised & trim only works in 4k requests + 4k aligned
642 { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-VERTEX4*", "*" },
648 * 4k optimised, NCQ TRIM seems to work
650 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 750*", "*" },
655 * Samsung 830 Series SSDs
656 * 4k optimised, NCQ TRIM Broken (normal TRIM is fine)
658 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG SSD 830 Series*", "*" },
659 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
664 * 4k optimised, NCQ TRIM Broken (normal TRIM is fine)
666 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 840*", "*" },
667 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
672 * 4k optimised, NCQ TRIM Broken (normal TRIM is fine)
674 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 845*", "*" },
675 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
680 * 4k optimised, NCQ TRIM broken (normal TRIM fine)
682 { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 850*", "*" },
683 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
687 * Samsung SM863 Series SSDs (MZ7KM*)
688 * 4k optimised, NCQ believed to be working
690 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG MZ7KM*", "*" },
695 * Samsung 843T Series SSDs (MZ7WD*)
696 * Samsung PM851 Series SSDs (MZ7TE*)
697 * Samsung PM853T Series SSDs (MZ7GE*)
698 * 4k optimised, NCQ believed to be broken since these are
699 * appear to be built with the same controllers as the 840/850.
701 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG MZ7*", "*" },
702 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
706 * Same as for SAMSUNG MZ7* but enable the quirks for SSD
707 * starting with MZ7* too
709 { T_DIRECT, SIP_MEDIA_FIXED, "*", "MZ7*", "*" },
710 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
714 * Samsung PM851 Series SSDs Dell OEM
715 * device model "SAMSUNG SSD PM851 mSATA 256GB"
716 * 4k optimised, NCQ broken
718 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG SSD PM851*", "*" },
719 /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN
723 * SuperTalent TeraDrive CT SSDs
724 * 4k optimised & trim only works in 4k requests + 4k aligned
726 { T_DIRECT, SIP_MEDIA_FIXED, "*", "FTM??CT25H*", "*" },
731 * XceedIOPS SATA SSDs
734 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SG9XCS2D*", "*" },
739 * Samsung drive that doesn't support READ LOG EXT or
740 * READ LOG DMA EXT, despite reporting that it does in
742 * SAMSUNG HD200HJ KF100-06
744 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD200*", "*" },
745 /*quirks*/ADA_Q_LOG_BROKEN
749 * Samsung drive that doesn't support READ LOG EXT or
750 * READ LOG DMA EXT, despite reporting that it does in
752 * SAMSUNG HD501LJ CR100-10
754 { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD501*", "*" },
755 /*quirks*/ADA_Q_LOG_BROKEN
759 * Seagate Lamarr 8TB Shingled Magnetic Recording (SMR)
760 * Drive Managed SATA hard drive. This drive doesn't report
761 * in firmware that it is a drive managed SMR drive.
763 { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST8000AS000[23]*", "*" },
764 /*quirks*/ADA_Q_SMR_DM
769 T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED,
770 /*vendor*/"*", /*product*/"*", /*revision*/"*"
776 static disk_strategy_t adastrategy;
777 static dumper_t adadump;
778 static periph_init_t adainit;
779 static void adadiskgonecb(struct disk *dp);
780 static periph_oninv_t adaoninvalidate;
781 static periph_dtor_t adacleanup;
782 static void adaasync(void *callback_arg, u_int32_t code,
783 struct cam_path *path, void *arg);
784 static int adazonemodesysctl(SYSCTL_HANDLER_ARGS);
785 static int adazonesupsysctl(SYSCTL_HANDLER_ARGS);
786 static void adasysctlinit(void *context, int pending);
787 static int adagetattr(struct bio *bp);
788 static void adasetflags(struct ada_softc *softc,
789 struct ccb_getdev *cgd);
790 static periph_ctor_t adaregister;
791 static void ada_dsmtrim(struct ada_softc *softc, struct bio *bp,
792 struct ccb_ataio *ataio);
793 static void ada_cfaerase(struct ada_softc *softc, struct bio *bp,
794 struct ccb_ataio *ataio);
795 static int ada_zone_bio_to_ata(int disk_zone_cmd);
796 static int ada_zone_cmd(struct cam_periph *periph, union ccb *ccb,
797 struct bio *bp, int *queue_ccb);
798 static periph_start_t adastart;
799 static void adaprobedone(struct cam_periph *periph, union ccb *ccb);
800 static void adazonedone(struct cam_periph *periph, union ccb *ccb);
801 static void adadone(struct cam_periph *periph,
802 union ccb *done_ccb);
803 static int adaerror(union ccb *ccb, u_int32_t cam_flags,
804 u_int32_t sense_flags);
805 static void adagetparams(struct cam_periph *periph,
806 struct ccb_getdev *cgd);
807 static timeout_t adasendorderedtag;
808 static void adashutdown(void *arg, int howto);
809 static void adasuspend(void *arg);
810 static void adaresume(void *arg);
812 #ifndef ADA_DEFAULT_TIMEOUT
813 #define ADA_DEFAULT_TIMEOUT 30 /* Timeout in seconds */
816 #ifndef ADA_DEFAULT_RETRY
817 #define ADA_DEFAULT_RETRY 4
820 #ifndef ADA_DEFAULT_SEND_ORDERED
821 #define ADA_DEFAULT_SEND_ORDERED 1
824 #ifndef ADA_DEFAULT_SPINDOWN_SHUTDOWN
825 #define ADA_DEFAULT_SPINDOWN_SHUTDOWN 1
828 #ifndef ADA_DEFAULT_SPINDOWN_SUSPEND
829 #define ADA_DEFAULT_SPINDOWN_SUSPEND 1
832 #ifndef ADA_DEFAULT_READ_AHEAD
833 #define ADA_DEFAULT_READ_AHEAD 1
836 #ifndef ADA_DEFAULT_WRITE_CACHE
837 #define ADA_DEFAULT_WRITE_CACHE 1
840 #define ADA_RA (softc->read_ahead >= 0 ? \
841 softc->read_ahead : ada_read_ahead)
842 #define ADA_WC (softc->write_cache >= 0 ? \
843 softc->write_cache : ada_write_cache)
846 * Most platforms map firmware geometry to actual, but some don't. If
847 * not overridden, default to nothing.
849 #ifndef ata_disk_firmware_geom_adjust
850 #define ata_disk_firmware_geom_adjust(disk)
853 static int ada_retry_count = ADA_DEFAULT_RETRY;
854 static int ada_default_timeout = ADA_DEFAULT_TIMEOUT;
855 static int ada_send_ordered = ADA_DEFAULT_SEND_ORDERED;
856 static int ada_spindown_shutdown = ADA_DEFAULT_SPINDOWN_SHUTDOWN;
857 static int ada_spindown_suspend = ADA_DEFAULT_SPINDOWN_SUSPEND;
858 static int ada_read_ahead = ADA_DEFAULT_READ_AHEAD;
859 static int ada_write_cache = ADA_DEFAULT_WRITE_CACHE;
861 static SYSCTL_NODE(_kern_cam, OID_AUTO, ada, CTLFLAG_RD, 0,
862 "CAM Direct Access Disk driver");
863 SYSCTL_INT(_kern_cam_ada, OID_AUTO, retry_count, CTLFLAG_RWTUN,
864 &ada_retry_count, 0, "Normal I/O retry count");
865 SYSCTL_INT(_kern_cam_ada, OID_AUTO, default_timeout, CTLFLAG_RWTUN,
866 &ada_default_timeout, 0, "Normal I/O timeout (in seconds)");
867 SYSCTL_INT(_kern_cam_ada, OID_AUTO, send_ordered, CTLFLAG_RWTUN,
868 &ada_send_ordered, 0, "Send Ordered Tags");
869 SYSCTL_INT(_kern_cam_ada, OID_AUTO, spindown_shutdown, CTLFLAG_RWTUN,
870 &ada_spindown_shutdown, 0, "Spin down upon shutdown");
871 SYSCTL_INT(_kern_cam_ada, OID_AUTO, spindown_suspend, CTLFLAG_RWTUN,
872 &ada_spindown_suspend, 0, "Spin down upon suspend");
873 SYSCTL_INT(_kern_cam_ada, OID_AUTO, read_ahead, CTLFLAG_RWTUN,
874 &ada_read_ahead, 0, "Enable disk read-ahead");
875 SYSCTL_INT(_kern_cam_ada, OID_AUTO, write_cache, CTLFLAG_RWTUN,
876 &ada_write_cache, 0, "Enable disk write cache");
879 * ADA_ORDEREDTAG_INTERVAL determines how often, relative
880 * to the default timeout, we check to see whether an ordered
881 * tagged transaction is appropriate to prevent simple tag
882 * starvation. Since we'd like to ensure that there is at least
883 * 1/2 of the timeout length left for a starved transaction to
884 * complete after we've sent an ordered tag, we must poll at least
885 * four times in every timeout period. This takes care of the worst
886 * case where a starved transaction starts during an interval that
887 * meets the requirement "don't send an ordered tag" test so it takes
888 * us two intervals to determine that a tag must be sent.
890 #ifndef ADA_ORDEREDTAG_INTERVAL
891 #define ADA_ORDEREDTAG_INTERVAL 4
894 static struct periph_driver adadriver =
897 TAILQ_HEAD_INITIALIZER(adadriver.units), /* generation */ 0
900 static int adadeletemethodsysctl(SYSCTL_HANDLER_ARGS);
902 PERIPHDRIVER_DECLARE(ada, adadriver);
904 static MALLOC_DEFINE(M_ATADA, "ata_da", "ata_da buffers");
907 adaopen(struct disk *dp)
909 struct cam_periph *periph;
910 struct ada_softc *softc;
913 periph = (struct cam_periph *)dp->d_drv1;
914 if (cam_periph_acquire(periph) != 0) {
918 cam_periph_lock(periph);
919 if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) {
920 cam_periph_unlock(periph);
921 cam_periph_release(periph);
925 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH,
928 softc = (struct ada_softc *)periph->softc;
929 softc->flags |= ADA_FLAG_OPEN;
931 cam_periph_unhold(periph);
932 cam_periph_unlock(periph);
937 adaclose(struct disk *dp)
939 struct cam_periph *periph;
940 struct ada_softc *softc;
944 periph = (struct cam_periph *)dp->d_drv1;
945 softc = (struct ada_softc *)periph->softc;
946 cam_periph_lock(periph);
948 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH,
951 /* We only sync the cache if the drive is capable of it. */
952 if ((softc->flags & ADA_FLAG_DIRTY) != 0 &&
953 (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) != 0 &&
954 (periph->flags & CAM_PERIPH_INVALID) == 0 &&
955 cam_periph_hold(periph, PRIBIO) == 0) {
957 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
958 cam_fill_ataio(&ccb->ataio,
965 ada_default_timeout*1000);
967 if (softc->flags & ADA_FLAG_CAN_48BIT)
968 ata_48bit_cmd(&ccb->ataio, ATA_FLUSHCACHE48, 0, 0, 0);
970 ata_28bit_cmd(&ccb->ataio, ATA_FLUSHCACHE, 0, 0, 0);
971 error = cam_periph_runccb(ccb, adaerror, /*cam_flags*/0,
972 /*sense_flags*/0, softc->disk->d_devstat);
975 xpt_print(periph->path, "Synchronize cache failed\n");
976 softc->flags &= ~ADA_FLAG_DIRTY;
977 xpt_release_ccb(ccb);
978 cam_periph_unhold(periph);
981 softc->flags &= ~ADA_FLAG_OPEN;
983 while (softc->refcount != 0)
984 cam_periph_sleep(periph, &softc->refcount, PRIBIO, "adaclose", 1);
985 cam_periph_unlock(periph);
986 cam_periph_release(periph);
991 adaschedule(struct cam_periph *periph)
993 struct ada_softc *softc = (struct ada_softc *)periph->softc;
995 if (softc->state != ADA_STATE_NORMAL)
998 cam_iosched_schedule(softc->cam_iosched, periph);
1002 * Actually translate the requested transfer into one the physical driver
1003 * can understand. The transfer is described by a buf and will include
1004 * only one physical transfer.
1007 adastrategy(struct bio *bp)
1009 struct cam_periph *periph;
1010 struct ada_softc *softc;
1012 periph = (struct cam_periph *)bp->bio_disk->d_drv1;
1013 softc = (struct ada_softc *)periph->softc;
1015 cam_periph_lock(periph);
1017 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("adastrategy(%p)\n", bp));
1020 * If the device has been made invalid, error out
1022 if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
1023 cam_periph_unlock(periph);
1024 biofinish(bp, NULL, ENXIO);
1029 * Zone commands must be ordered, because they can depend on the
1030 * effects of previously issued commands, and they may affect
1031 * commands after them.
1033 if (bp->bio_cmd == BIO_ZONE)
1034 bp->bio_flags |= BIO_ORDERED;
1037 * Place it in the queue of disk activities for this disk
1039 cam_iosched_queue_work(softc->cam_iosched, bp);
1042 * Schedule ourselves for performing the work.
1044 adaschedule(periph);
1045 cam_periph_unlock(periph);
1051 adadump(void *arg, void *virtual, vm_offset_t physical, off_t offset, size_t length)
1053 struct cam_periph *periph;
1054 struct ada_softc *softc;
1056 struct ccb_ataio ataio;
1063 periph = dp->d_drv1;
1064 softc = (struct ada_softc *)periph->softc;
1065 secsize = softc->params.secsize;
1066 lba = offset / secsize;
1067 count = length / secsize;
1069 if ((periph->flags & CAM_PERIPH_INVALID) != 0)
1072 memset(&ataio, 0, sizeof(ataio));
1074 xpt_setup_ccb(&ataio.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1075 ataio.ccb_h.ccb_state = ADA_CCB_DUMP;
1076 cam_fill_ataio(&ataio,
1081 (u_int8_t *) virtual,
1083 ada_default_timeout*1000);
1084 if ((softc->flags & ADA_FLAG_CAN_48BIT) &&
1085 (lba + count >= ATA_MAX_28BIT_LBA ||
1087 ata_48bit_cmd(&ataio, ATA_WRITE_DMA48,
1090 ata_28bit_cmd(&ataio, ATA_WRITE_DMA,
1093 error = cam_periph_runccb((union ccb *)&ataio, adaerror,
1094 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL);
1096 printf("Aborting dump due to I/O error.\n");
1101 if (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) {
1102 xpt_setup_ccb(&ataio.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1105 * Tell the drive to flush its internal cache. if we
1106 * can't flush in 5s we have big problems. No need to
1107 * wait the default 60s to detect problems.
1109 ataio.ccb_h.ccb_state = ADA_CCB_DUMP;
1110 cam_fill_ataio(&ataio,
1119 if (softc->flags & ADA_FLAG_CAN_48BIT)
1120 ata_48bit_cmd(&ataio, ATA_FLUSHCACHE48, 0, 0, 0);
1122 ata_28bit_cmd(&ataio, ATA_FLUSHCACHE, 0, 0, 0);
1123 error = cam_periph_runccb((union ccb *)&ataio, adaerror,
1124 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL);
1126 xpt_print(periph->path, "Synchronize cache failed\n");
1137 * Install a global async callback. This callback will
1138 * receive async callbacks like "new device found".
1140 status = xpt_register_async(AC_FOUND_DEVICE, adaasync, NULL, NULL);
1142 if (status != CAM_REQ_CMP) {
1143 printf("ada: Failed to attach master async callback "
1144 "due to status 0x%x!\n", status);
1145 } else if (ada_send_ordered) {
1147 /* Register our event handlers */
1148 if ((EVENTHANDLER_REGISTER(power_suspend, adasuspend,
1149 NULL, EVENTHANDLER_PRI_LAST)) == NULL)
1150 printf("adainit: power event registration failed!\n");
1151 if ((EVENTHANDLER_REGISTER(power_resume, adaresume,
1152 NULL, EVENTHANDLER_PRI_LAST)) == NULL)
1153 printf("adainit: power event registration failed!\n");
1154 if ((EVENTHANDLER_REGISTER(shutdown_post_sync, adashutdown,
1155 NULL, SHUTDOWN_PRI_DEFAULT)) == NULL)
1156 printf("adainit: shutdown event registration failed!\n");
1161 * Callback from GEOM, called when it has finished cleaning up its
1165 adadiskgonecb(struct disk *dp)
1167 struct cam_periph *periph;
1169 periph = (struct cam_periph *)dp->d_drv1;
1171 cam_periph_release(periph);
1175 adaoninvalidate(struct cam_periph *periph)
1177 struct ada_softc *softc;
1179 softc = (struct ada_softc *)periph->softc;
1182 * De-register any async callbacks.
1184 xpt_register_async(0, adaasync, periph, periph->path);
1186 softc->invalidations++;
1190 * Return all queued I/O with ENXIO.
1191 * XXX Handle any transactions queued to the card
1192 * with XPT_ABORT_CCB.
1194 cam_iosched_flush(softc->cam_iosched, NULL, ENXIO);
1196 disk_gone(softc->disk);
1200 adacleanup(struct cam_periph *periph)
1202 struct ada_softc *softc;
1204 softc = (struct ada_softc *)periph->softc;
1206 cam_periph_unlock(periph);
1208 cam_iosched_fini(softc->cam_iosched);
1211 * If we can't free the sysctl tree, oh well...
1213 if ((softc->flags & ADA_FLAG_SCTX_INIT) != 0) {
1215 if (sysctl_ctx_free(&softc->sysctl_stats_ctx) != 0)
1216 xpt_print(periph->path,
1217 "can't remove sysctl stats context\n");
1219 if (sysctl_ctx_free(&softc->sysctl_ctx) != 0)
1220 xpt_print(periph->path,
1221 "can't remove sysctl context\n");
1224 disk_destroy(softc->disk);
1225 callout_drain(&softc->sendordered_c);
1226 free(softc, M_DEVBUF);
1227 cam_periph_lock(periph);
1231 adasetdeletemethod(struct ada_softc *softc)
1234 if (softc->flags & ADA_FLAG_CAN_NCQ_TRIM)
1235 softc->delete_method = ADA_DELETE_NCQ_DSM_TRIM;
1236 else if (softc->flags & ADA_FLAG_CAN_TRIM)
1237 softc->delete_method = ADA_DELETE_DSM_TRIM;
1238 else if ((softc->flags & ADA_FLAG_CAN_CFA) && !(softc->flags & ADA_FLAG_CAN_48BIT))
1239 softc->delete_method = ADA_DELETE_CFA_ERASE;
1241 softc->delete_method = ADA_DELETE_NONE;
1245 adaasync(void *callback_arg, u_int32_t code,
1246 struct cam_path *path, void *arg)
1248 struct ccb_getdev cgd;
1249 struct cam_periph *periph;
1250 struct ada_softc *softc;
1252 periph = (struct cam_periph *)callback_arg;
1254 case AC_FOUND_DEVICE:
1256 struct ccb_getdev *cgd;
1259 cgd = (struct ccb_getdev *)arg;
1263 if (cgd->protocol != PROTO_ATA)
1267 * Allocate a peripheral instance for
1268 * this device and start the probe
1271 status = cam_periph_alloc(adaregister, adaoninvalidate,
1272 adacleanup, adastart,
1273 "ada", CAM_PERIPH_BIO,
1275 AC_FOUND_DEVICE, cgd);
1277 if (status != CAM_REQ_CMP
1278 && status != CAM_REQ_INPROG)
1279 printf("adaasync: Unable to attach to new device "
1280 "due to status 0x%x\n", status);
1283 case AC_GETDEV_CHANGED:
1285 softc = (struct ada_softc *)periph->softc;
1286 xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1287 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
1288 xpt_action((union ccb *)&cgd);
1291 * Set/clear support flags based on the new Identify data.
1293 adasetflags(softc, &cgd);
1295 cam_periph_async(periph, code, path, arg);
1298 case AC_ADVINFO_CHANGED:
1302 buftype = (uintptr_t)arg;
1303 if (buftype == CDAI_TYPE_PHYS_PATH) {
1304 struct ada_softc *softc;
1306 softc = periph->softc;
1307 disk_attr_changed(softc->disk, "GEOM::physpath",
1315 softc = (struct ada_softc *)periph->softc;
1316 cam_periph_async(periph, code, path, arg);
1317 if (softc->state != ADA_STATE_NORMAL)
1319 xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1320 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
1321 xpt_action((union ccb *)&cgd);
1322 if (ADA_RA >= 0 && softc->flags & ADA_FLAG_CAN_RAHEAD)
1323 softc->state = ADA_STATE_RAHEAD;
1324 else if (ADA_WC >= 0 && softc->flags & ADA_FLAG_CAN_WCACHE)
1325 softc->state = ADA_STATE_WCACHE;
1326 else if ((softc->flags & ADA_FLAG_CAN_LOG)
1327 && (softc->zone_mode != ADA_ZONE_NONE))
1328 softc->state = ADA_STATE_LOGDIR;
1331 if (cam_periph_acquire(periph) != 0)
1332 softc->state = ADA_STATE_NORMAL;
1334 xpt_schedule(periph, CAM_PRIORITY_DEV);
1337 cam_periph_async(periph, code, path, arg);
1343 adazonemodesysctl(SYSCTL_HANDLER_ARGS)
1346 struct ada_softc *softc;
1349 softc = (struct ada_softc *)arg1;
1351 switch (softc->zone_mode) {
1352 case ADA_ZONE_DRIVE_MANAGED:
1353 snprintf(tmpbuf, sizeof(tmpbuf), "Drive Managed");
1355 case ADA_ZONE_HOST_AWARE:
1356 snprintf(tmpbuf, sizeof(tmpbuf), "Host Aware");
1358 case ADA_ZONE_HOST_MANAGED:
1359 snprintf(tmpbuf, sizeof(tmpbuf), "Host Managed");
1363 snprintf(tmpbuf, sizeof(tmpbuf), "Not Zoned");
1367 error = sysctl_handle_string(oidp, tmpbuf, sizeof(tmpbuf), req);
1373 adazonesupsysctl(SYSCTL_HANDLER_ARGS)
1376 struct ada_softc *softc;
1381 softc = (struct ada_softc *)arg1;
1385 sbuf_new(&sb, tmpbuf, sizeof(tmpbuf), 0);
1387 for (i = 0; i < sizeof(ada_zone_desc_table) /
1388 sizeof(ada_zone_desc_table[0]); i++) {
1389 if (softc->zone_flags & ada_zone_desc_table[i].value) {
1391 sbuf_printf(&sb, ", ");
1394 sbuf_cat(&sb, ada_zone_desc_table[i].desc);
1399 sbuf_printf(&sb, "None");
1403 error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
1410 adasysctlinit(void *context, int pending)
1412 struct cam_periph *periph;
1413 struct ada_softc *softc;
1414 char tmpstr[32], tmpstr2[16];
1416 periph = (struct cam_periph *)context;
1418 /* periph was held for us when this task was enqueued */
1419 if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
1420 cam_periph_release(periph);
1424 softc = (struct ada_softc *)periph->softc;
1425 snprintf(tmpstr, sizeof(tmpstr), "CAM ADA unit %d",periph->unit_number);
1426 snprintf(tmpstr2, sizeof(tmpstr2), "%d", periph->unit_number);
1428 sysctl_ctx_init(&softc->sysctl_ctx);
1429 softc->flags |= ADA_FLAG_SCTX_INIT;
1430 softc->sysctl_tree = SYSCTL_ADD_NODE_WITH_LABEL(&softc->sysctl_ctx,
1431 SYSCTL_STATIC_CHILDREN(_kern_cam_ada), OID_AUTO, tmpstr2,
1432 CTLFLAG_RD, 0, tmpstr, "device_index");
1433 if (softc->sysctl_tree == NULL) {
1434 printf("adasysctlinit: unable to allocate sysctl tree\n");
1435 cam_periph_release(periph);
1439 SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1440 OID_AUTO, "delete_method", CTLTYPE_STRING | CTLFLAG_RW,
1441 softc, 0, adadeletemethodsysctl, "A",
1442 "BIO_DELETE execution method");
1443 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1444 OID_AUTO, "read_ahead", CTLFLAG_RW | CTLFLAG_MPSAFE,
1445 &softc->read_ahead, 0, "Enable disk read ahead.");
1446 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1447 OID_AUTO, "write_cache", CTLFLAG_RW | CTLFLAG_MPSAFE,
1448 &softc->write_cache, 0, "Enable disk write cache.");
1449 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1450 OID_AUTO, "unmapped_io", CTLFLAG_RD | CTLFLAG_MPSAFE,
1451 &softc->unmappedio, 0, "Unmapped I/O leaf");
1452 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1453 OID_AUTO, "rotating", CTLFLAG_RD | CTLFLAG_MPSAFE,
1454 &softc->rotating, 0, "Rotating media");
1455 SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1456 OID_AUTO, "zone_mode", CTLTYPE_STRING | CTLFLAG_RD,
1457 softc, 0, adazonemodesysctl, "A",
1459 SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1460 OID_AUTO, "zone_support", CTLTYPE_STRING | CTLFLAG_RD,
1461 softc, 0, adazonesupsysctl, "A",
1463 SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
1464 SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
1465 "optimal_seq_zones", CTLFLAG_RD, &softc->optimal_seq_zones,
1466 "Optimal Number of Open Sequential Write Preferred Zones");
1467 SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
1468 SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
1469 "optimal_nonseq_zones", CTLFLAG_RD,
1470 &softc->optimal_nonseq_zones,
1471 "Optimal Number of Non-Sequentially Written Sequential Write "
1473 SYSCTL_ADD_UQUAD(&softc->sysctl_ctx,
1474 SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO,
1475 "max_seq_zones", CTLFLAG_RD, &softc->max_seq_zones,
1476 "Maximum Number of Open Sequential Write Required Zones");
1478 #ifdef CAM_TEST_FAILURE
1480 * Add a 'door bell' sysctl which allows one to set it from userland
1481 * and cause something bad to happen. For the moment, we only allow
1482 * whacking the next read or write.
1484 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1485 OID_AUTO, "force_read_error", CTLFLAG_RW | CTLFLAG_MPSAFE,
1486 &softc->force_read_error, 0,
1487 "Force a read error for the next N reads.");
1488 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1489 OID_AUTO, "force_write_error", CTLFLAG_RW | CTLFLAG_MPSAFE,
1490 &softc->force_write_error, 0,
1491 "Force a write error for the next N writes.");
1492 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1493 OID_AUTO, "periodic_read_error", CTLFLAG_RW | CTLFLAG_MPSAFE,
1494 &softc->periodic_read_error, 0,
1495 "Force a read error every N reads (don't set too low).");
1496 SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
1497 OID_AUTO, "invalidate", CTLTYPE_U64 | CTLFLAG_RW | CTLFLAG_MPSAFE,
1498 periph, 0, cam_periph_invalidate_sysctl, "I",
1499 "Write 1 to invalidate the drive immediately");
1503 softc->sysctl_stats_tree = SYSCTL_ADD_NODE(&softc->sysctl_stats_ctx,
1504 SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "stats",
1505 CTLFLAG_RD, 0, "Statistics");
1506 SYSCTL_ADD_INT(&softc->sysctl_stats_ctx,
1507 SYSCTL_CHILDREN(softc->sysctl_stats_tree),
1508 OID_AUTO, "timeouts", CTLFLAG_RD | CTLFLAG_MPSAFE,
1509 &softc->timeouts, 0,
1510 "Device timeouts reported by the SIM");
1511 SYSCTL_ADD_INT(&softc->sysctl_stats_ctx,
1512 SYSCTL_CHILDREN(softc->sysctl_stats_tree),
1513 OID_AUTO, "errors", CTLFLAG_RD | CTLFLAG_MPSAFE,
1515 "Transport errors reported by the SIM.");
1516 SYSCTL_ADD_INT(&softc->sysctl_stats_ctx,
1517 SYSCTL_CHILDREN(softc->sysctl_stats_tree),
1518 OID_AUTO, "pack_invalidations", CTLFLAG_RD | CTLFLAG_MPSAFE,
1519 &softc->invalidations, 0,
1520 "Device pack invalidations.");
1523 cam_iosched_sysctl_init(softc->cam_iosched, &softc->sysctl_ctx,
1524 softc->sysctl_tree);
1526 cam_periph_release(periph);
1530 adagetattr(struct bio *bp)
1533 struct cam_periph *periph;
1535 periph = (struct cam_periph *)bp->bio_disk->d_drv1;
1536 cam_periph_lock(periph);
1537 ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute,
1539 cam_periph_unlock(periph);
1541 bp->bio_completed = bp->bio_length;
1546 adadeletemethodsysctl(SYSCTL_HANDLER_ARGS)
1550 struct ada_softc *softc;
1551 int i, error, value, methods;
1553 softc = (struct ada_softc *)arg1;
1555 value = softc->delete_method;
1556 if (value < 0 || value > ADA_DELETE_MAX)
1559 p = ada_delete_method_names[value];
1560 strncpy(buf, p, sizeof(buf));
1561 error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
1562 if (error != 0 || req->newptr == NULL)
1564 methods = 1 << ADA_DELETE_DISABLE;
1565 if ((softc->flags & ADA_FLAG_CAN_CFA) &&
1566 !(softc->flags & ADA_FLAG_CAN_48BIT))
1567 methods |= 1 << ADA_DELETE_CFA_ERASE;
1568 if (softc->flags & ADA_FLAG_CAN_TRIM)
1569 methods |= 1 << ADA_DELETE_DSM_TRIM;
1570 if (softc->flags & ADA_FLAG_CAN_NCQ_TRIM)
1571 methods |= 1 << ADA_DELETE_NCQ_DSM_TRIM;
1572 for (i = 0; i <= ADA_DELETE_MAX; i++) {
1573 if (!(methods & (1 << i)) ||
1574 strcmp(buf, ada_delete_method_names[i]) != 0)
1576 softc->delete_method = i;
1583 adasetflags(struct ada_softc *softc, struct ccb_getdev *cgd)
1585 if ((cgd->ident_data.capabilities1 & ATA_SUPPORT_DMA) &&
1586 (cgd->inq_flags & SID_DMA))
1587 softc->flags |= ADA_FLAG_CAN_DMA;
1589 softc->flags &= ~ADA_FLAG_CAN_DMA;
1591 if (cgd->ident_data.support.command2 & ATA_SUPPORT_ADDRESS48) {
1592 softc->flags |= ADA_FLAG_CAN_48BIT;
1593 if (cgd->inq_flags & SID_DMA48)
1594 softc->flags |= ADA_FLAG_CAN_DMA48;
1596 softc->flags &= ~ADA_FLAG_CAN_DMA48;
1598 softc->flags &= ~(ADA_FLAG_CAN_48BIT | ADA_FLAG_CAN_DMA48);
1600 if (cgd->ident_data.support.command2 & ATA_SUPPORT_FLUSHCACHE)
1601 softc->flags |= ADA_FLAG_CAN_FLUSHCACHE;
1603 softc->flags &= ~ADA_FLAG_CAN_FLUSHCACHE;
1605 if (cgd->ident_data.support.command1 & ATA_SUPPORT_POWERMGT)
1606 softc->flags |= ADA_FLAG_CAN_POWERMGT;
1608 softc->flags &= ~ADA_FLAG_CAN_POWERMGT;
1610 if ((cgd->ident_data.satacapabilities & ATA_SUPPORT_NCQ) &&
1611 (cgd->inq_flags & SID_DMA) && (cgd->inq_flags & SID_CmdQue))
1612 softc->flags |= ADA_FLAG_CAN_NCQ;
1614 softc->flags &= ~ADA_FLAG_CAN_NCQ;
1616 if ((cgd->ident_data.support_dsm & ATA_SUPPORT_DSM_TRIM) &&
1617 (cgd->inq_flags & SID_DMA)) {
1618 softc->flags |= ADA_FLAG_CAN_TRIM;
1619 softc->trim_max_ranges = TRIM_MAX_RANGES;
1620 if (cgd->ident_data.max_dsm_blocks != 0) {
1621 softc->trim_max_ranges =
1622 min(cgd->ident_data.max_dsm_blocks *
1623 ATA_DSM_BLK_RANGES, softc->trim_max_ranges);
1626 * If we can do RCVSND_FPDMA_QUEUED commands, we may be able
1627 * to do NCQ trims, if we support trims at all. We also need
1628 * support from the SIM to do things properly. Perhaps we
1629 * should look at log 13 dword 0 bit 0 and dword 1 bit 0 are
1632 if ((softc->quirks & ADA_Q_NCQ_TRIM_BROKEN) == 0 &&
1633 (softc->flags & ADA_FLAG_PIM_ATA_EXT) != 0 &&
1634 (cgd->ident_data.satacapabilities2 &
1635 ATA_SUPPORT_RCVSND_FPDMA_QUEUED) != 0 &&
1636 (softc->flags & ADA_FLAG_CAN_TRIM) != 0)
1637 softc->flags |= ADA_FLAG_CAN_NCQ_TRIM;
1639 softc->flags &= ~ADA_FLAG_CAN_NCQ_TRIM;
1641 softc->flags &= ~(ADA_FLAG_CAN_TRIM | ADA_FLAG_CAN_NCQ_TRIM);
1643 if (cgd->ident_data.support.command2 & ATA_SUPPORT_CFA)
1644 softc->flags |= ADA_FLAG_CAN_CFA;
1646 softc->flags &= ~ADA_FLAG_CAN_CFA;
1649 * Now that we've set the appropriate flags, setup the delete
1652 adasetdeletemethod(softc);
1654 if ((cgd->ident_data.support.extension & ATA_SUPPORT_GENLOG)
1655 && ((softc->quirks & ADA_Q_LOG_BROKEN) == 0))
1656 softc->flags |= ADA_FLAG_CAN_LOG;
1658 softc->flags &= ~ADA_FLAG_CAN_LOG;
1660 if ((cgd->ident_data.support3 & ATA_SUPPORT_ZONE_MASK) ==
1661 ATA_SUPPORT_ZONE_HOST_AWARE)
1662 softc->zone_mode = ADA_ZONE_HOST_AWARE;
1663 else if (((cgd->ident_data.support3 & ATA_SUPPORT_ZONE_MASK) ==
1664 ATA_SUPPORT_ZONE_DEV_MANAGED)
1665 || (softc->quirks & ADA_Q_SMR_DM))
1666 softc->zone_mode = ADA_ZONE_DRIVE_MANAGED;
1668 softc->zone_mode = ADA_ZONE_NONE;
1670 if (cgd->ident_data.support.command1 & ATA_SUPPORT_LOOKAHEAD)
1671 softc->flags |= ADA_FLAG_CAN_RAHEAD;
1673 softc->flags &= ~ADA_FLAG_CAN_RAHEAD;
1675 if (cgd->ident_data.support.command1 & ATA_SUPPORT_WRITECACHE)
1676 softc->flags |= ADA_FLAG_CAN_WCACHE;
1678 softc->flags &= ~ADA_FLAG_CAN_WCACHE;
1682 adaregister(struct cam_periph *periph, void *arg)
1684 struct ada_softc *softc;
1685 struct ccb_pathinq cpi;
1686 struct ccb_getdev *cgd;
1687 struct disk_params *dp;
1694 cgd = (struct ccb_getdev *)arg;
1696 printf("adaregister: no getdev CCB, can't register device\n");
1697 return(CAM_REQ_CMP_ERR);
1700 softc = (struct ada_softc *)malloc(sizeof(*softc), M_DEVBUF,
1703 if (softc == NULL) {
1704 printf("adaregister: Unable to probe new device. "
1705 "Unable to allocate softc\n");
1706 return(CAM_REQ_CMP_ERR);
1709 announce_buf = softc->announce_temp;
1710 bzero(announce_buf, ADA_ANNOUNCETMP_SZ);
1712 if (cam_iosched_init(&softc->cam_iosched, periph) != 0) {
1713 printf("adaregister: Unable to probe new device. "
1714 "Unable to allocate iosched memory\n");
1715 free(softc, M_DEVBUF);
1716 return(CAM_REQ_CMP_ERR);
1719 periph->softc = softc;
1722 * See if this device has any quirks.
1724 match = cam_quirkmatch((caddr_t)&cgd->ident_data,
1725 (caddr_t)ada_quirk_table,
1726 nitems(ada_quirk_table),
1727 sizeof(*ada_quirk_table), ata_identify_match);
1729 softc->quirks = ((struct ada_quirk_entry *)match)->quirks;
1731 softc->quirks = ADA_Q_NONE;
1733 xpt_path_inq(&cpi, periph->path);
1735 TASK_INIT(&softc->sysctl_task, 0, adasysctlinit, periph);
1738 * Register this media as a disk
1740 (void)cam_periph_hold(periph, PRIBIO);
1741 cam_periph_unlock(periph);
1742 snprintf(announce_buf, ADA_ANNOUNCETMP_SZ,
1743 "kern.cam.ada.%d.quirks", periph->unit_number);
1744 quirks = softc->quirks;
1745 TUNABLE_INT_FETCH(announce_buf, &quirks);
1746 softc->quirks = quirks;
1747 softc->read_ahead = -1;
1748 snprintf(announce_buf, ADA_ANNOUNCETMP_SZ,
1749 "kern.cam.ada.%d.read_ahead", periph->unit_number);
1750 TUNABLE_INT_FETCH(announce_buf, &softc->read_ahead);
1751 softc->write_cache = -1;
1752 snprintf(announce_buf, ADA_ANNOUNCETMP_SZ,
1753 "kern.cam.ada.%d.write_cache", periph->unit_number);
1754 TUNABLE_INT_FETCH(announce_buf, &softc->write_cache);
1757 * Set support flags based on the Identify data and quirks.
1759 adasetflags(softc, cgd);
1761 /* Disable queue sorting for non-rotational media by default. */
1762 if (cgd->ident_data.media_rotation_rate == ATA_RATE_NON_ROTATING) {
1763 softc->rotating = 0;
1765 softc->rotating = 1;
1767 cam_iosched_set_sort_queue(softc->cam_iosched, softc->rotating ? -1 : 0);
1768 adagetparams(periph, cgd);
1769 softc->disk = disk_alloc();
1770 softc->disk->d_rotation_rate = cgd->ident_data.media_rotation_rate;
1771 softc->disk->d_devstat = devstat_new_entry(periph->periph_name,
1772 periph->unit_number, softc->params.secsize,
1773 DEVSTAT_ALL_SUPPORTED,
1774 DEVSTAT_TYPE_DIRECT |
1775 XPORT_DEVSTAT_TYPE(cpi.transport),
1776 DEVSTAT_PRIORITY_DISK);
1777 softc->disk->d_open = adaopen;
1778 softc->disk->d_close = adaclose;
1779 softc->disk->d_strategy = adastrategy;
1780 softc->disk->d_getattr = adagetattr;
1781 softc->disk->d_dump = adadump;
1782 softc->disk->d_gone = adadiskgonecb;
1783 softc->disk->d_name = "ada";
1784 softc->disk->d_drv1 = periph;
1785 maxio = cpi.maxio; /* Honor max I/O size of SIM */
1787 maxio = DFLTPHYS; /* traditional default */
1788 else if (maxio > MAXPHYS)
1789 maxio = MAXPHYS; /* for safety */
1790 if (softc->flags & ADA_FLAG_CAN_48BIT)
1791 maxio = min(maxio, 65536 * softc->params.secsize);
1792 else /* 28bit ATA command limit */
1793 maxio = min(maxio, 256 * softc->params.secsize);
1794 softc->disk->d_maxsize = maxio;
1795 softc->disk->d_unit = periph->unit_number;
1796 softc->disk->d_flags = DISKFLAG_DIRECT_COMPLETION | DISKFLAG_CANZONE;
1797 if (softc->flags & ADA_FLAG_CAN_FLUSHCACHE)
1798 softc->disk->d_flags |= DISKFLAG_CANFLUSHCACHE;
1799 if (softc->flags & ADA_FLAG_CAN_TRIM) {
1800 softc->disk->d_flags |= DISKFLAG_CANDELETE;
1801 softc->disk->d_delmaxsize = softc->params.secsize *
1803 softc->trim_max_ranges;
1804 } else if ((softc->flags & ADA_FLAG_CAN_CFA) &&
1805 !(softc->flags & ADA_FLAG_CAN_48BIT)) {
1806 softc->disk->d_flags |= DISKFLAG_CANDELETE;
1807 softc->disk->d_delmaxsize = 256 * softc->params.secsize;
1809 softc->disk->d_delmaxsize = maxio;
1810 if ((cpi.hba_misc & PIM_UNMAPPED) != 0) {
1811 softc->disk->d_flags |= DISKFLAG_UNMAPPED_BIO;
1812 softc->unmappedio = 1;
1814 if (cpi.hba_misc & PIM_ATA_EXT)
1815 softc->flags |= ADA_FLAG_PIM_ATA_EXT;
1816 strlcpy(softc->disk->d_descr, cgd->ident_data.model,
1817 MIN(sizeof(softc->disk->d_descr), sizeof(cgd->ident_data.model)));
1818 strlcpy(softc->disk->d_ident, cgd->ident_data.serial,
1819 MIN(sizeof(softc->disk->d_ident), sizeof(cgd->ident_data.serial)));
1820 softc->disk->d_hba_vendor = cpi.hba_vendor;
1821 softc->disk->d_hba_device = cpi.hba_device;
1822 softc->disk->d_hba_subvendor = cpi.hba_subvendor;
1823 softc->disk->d_hba_subdevice = cpi.hba_subdevice;
1825 softc->disk->d_sectorsize = softc->params.secsize;
1826 softc->disk->d_mediasize = (off_t)softc->params.sectors *
1827 softc->params.secsize;
1828 if (ata_physical_sector_size(&cgd->ident_data) !=
1829 softc->params.secsize) {
1830 softc->disk->d_stripesize =
1831 ata_physical_sector_size(&cgd->ident_data);
1832 softc->disk->d_stripeoffset = (softc->disk->d_stripesize -
1833 ata_logical_sector_offset(&cgd->ident_data)) %
1834 softc->disk->d_stripesize;
1835 } else if (softc->quirks & ADA_Q_4K) {
1836 softc->disk->d_stripesize = 4096;
1837 softc->disk->d_stripeoffset = 0;
1839 softc->disk->d_fwsectors = softc->params.secs_per_track;
1840 softc->disk->d_fwheads = softc->params.heads;
1841 ata_disk_firmware_geom_adjust(softc->disk);
1844 * Acquire a reference to the periph before we register with GEOM.
1845 * We'll release this reference once GEOM calls us back (via
1846 * adadiskgonecb()) telling us that our provider has been freed.
1848 if (cam_periph_acquire(periph) != 0) {
1849 xpt_print(periph->path, "%s: lost periph during "
1850 "registration!\n", __func__);
1851 cam_periph_lock(periph);
1852 return (CAM_REQ_CMP_ERR);
1854 disk_create(softc->disk, DISK_VERSION);
1855 cam_periph_lock(periph);
1857 dp = &softc->params;
1858 snprintf(announce_buf, ADA_ANNOUNCETMP_SZ,
1859 "%juMB (%ju %u byte sectors)",
1860 ((uintmax_t)dp->secsize * dp->sectors) / (1024 * 1024),
1861 (uintmax_t)dp->sectors, dp->secsize);
1863 sbuf_new(&sb, softc->announce_buffer, ADA_ANNOUNCE_SZ, SBUF_FIXEDLEN);
1864 xpt_announce_periph_sbuf(periph, &sb, announce_buf);
1865 xpt_announce_quirks_sbuf(periph, &sb, softc->quirks, ADA_Q_BIT_STRING);
1870 * Create our sysctl variables, now that we know
1871 * we have successfully attached.
1873 if (cam_periph_acquire(periph) == 0)
1874 taskqueue_enqueue(taskqueue_thread, &softc->sysctl_task);
1877 * Add async callbacks for bus reset and
1878 * bus device reset calls. I don't bother
1879 * checking if this fails as, in most cases,
1880 * the system will function just fine without
1881 * them and the only alternative would be to
1882 * not attach the device on failure.
1884 xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE |
1885 AC_GETDEV_CHANGED | AC_ADVINFO_CHANGED,
1886 adaasync, periph, periph->path);
1889 * Schedule a periodic event to occasionally send an
1890 * ordered tag to a device.
1892 callout_init_mtx(&softc->sendordered_c, cam_periph_mtx(periph), 0);
1893 callout_reset(&softc->sendordered_c,
1894 (ada_default_timeout * hz) / ADA_ORDEREDTAG_INTERVAL,
1895 adasendorderedtag, softc);
1897 if (ADA_RA >= 0 && softc->flags & ADA_FLAG_CAN_RAHEAD) {
1898 softc->state = ADA_STATE_RAHEAD;
1899 } else if (ADA_WC >= 0 && softc->flags & ADA_FLAG_CAN_WCACHE) {
1900 softc->state = ADA_STATE_WCACHE;
1901 } else if ((softc->flags & ADA_FLAG_CAN_LOG)
1902 && (softc->zone_mode != ADA_ZONE_NONE)) {
1903 softc->state = ADA_STATE_LOGDIR;
1906 * Nothing to probe, so we can just transition to the
1909 adaprobedone(periph, NULL);
1910 return(CAM_REQ_CMP);
1913 xpt_schedule(periph, CAM_PRIORITY_DEV);
1915 return(CAM_REQ_CMP);
1919 ada_dsmtrim_req_create(struct ada_softc *softc, struct bio *bp, struct trim_request *req)
1921 uint64_t lastlba = (uint64_t)-1;
1922 int c, lastcount = 0, off, ranges = 0;
1924 bzero(req, sizeof(*req));
1925 TAILQ_INIT(&req->bps);
1927 uint64_t lba = bp->bio_pblkno;
1928 int count = bp->bio_bcount / softc->params.secsize;
1930 /* Try to extend the previous range. */
1931 if (lba == lastlba) {
1932 c = min(count, ATA_DSM_RANGE_MAX - lastcount);
1934 off = (ranges - 1) * ATA_DSM_RANGE_SIZE;
1935 req->data[off + 6] = lastcount & 0xff;
1936 req->data[off + 7] =
1937 (lastcount >> 8) & 0xff;
1943 c = min(count, ATA_DSM_RANGE_MAX);
1944 off = ranges * ATA_DSM_RANGE_SIZE;
1945 req->data[off + 0] = lba & 0xff;
1946 req->data[off + 1] = (lba >> 8) & 0xff;
1947 req->data[off + 2] = (lba >> 16) & 0xff;
1948 req->data[off + 3] = (lba >> 24) & 0xff;
1949 req->data[off + 4] = (lba >> 32) & 0xff;
1950 req->data[off + 5] = (lba >> 40) & 0xff;
1951 req->data[off + 6] = c & 0xff;
1952 req->data[off + 7] = (c >> 8) & 0xff;
1958 * Its the caller's responsibility to ensure the
1959 * request will fit so we don't need to check for
1964 TAILQ_INSERT_TAIL(&req->bps, bp, bio_queue);
1966 bp = cam_iosched_next_trim(softc->cam_iosched);
1969 if (bp->bio_bcount / softc->params.secsize >
1970 (softc->trim_max_ranges - ranges) * ATA_DSM_RANGE_MAX) {
1971 cam_iosched_put_back_trim(softc->cam_iosched, bp);
1980 ada_dsmtrim(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio)
1982 struct trim_request *req = &softc->trim_req;
1985 ranges = ada_dsmtrim_req_create(softc, bp, req);
1986 cam_fill_ataio(ataio,
1992 howmany(ranges, ATA_DSM_BLK_RANGES) * ATA_DSM_BLK_SIZE,
1993 ada_default_timeout * 1000);
1994 ata_48bit_cmd(ataio, ATA_DATA_SET_MANAGEMENT,
1995 ATA_DSM_TRIM, 0, howmany(ranges, ATA_DSM_BLK_RANGES));
1999 ada_ncq_dsmtrim(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio)
2001 struct trim_request *req = &softc->trim_req;
2004 ranges = ada_dsmtrim_req_create(softc, bp, req);
2005 cam_fill_ataio(ataio,
2011 howmany(ranges, ATA_DSM_BLK_RANGES) * ATA_DSM_BLK_SIZE,
2012 ada_default_timeout * 1000);
2014 ATA_SEND_FPDMA_QUEUED,
2016 howmany(ranges, ATA_DSM_BLK_RANGES));
2017 ataio->cmd.sector_count_exp = ATA_SFPDMA_DSM;
2018 ataio->ata_flags |= ATA_FLAG_AUX;
2023 ada_cfaerase(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio)
2025 struct trim_request *req = &softc->trim_req;
2026 uint64_t lba = bp->bio_pblkno;
2027 uint16_t count = bp->bio_bcount / softc->params.secsize;
2029 bzero(req, sizeof(*req));
2030 TAILQ_INIT(&req->bps);
2031 TAILQ_INSERT_TAIL(&req->bps, bp, bio_queue);
2033 cam_fill_ataio(ataio,
2040 ada_default_timeout*1000);
2044 ata_28bit_cmd(ataio, ATA_CFA_ERASE, 0, lba, count);
2048 ada_zone_bio_to_ata(int disk_zone_cmd)
2050 switch (disk_zone_cmd) {
2051 case DISK_ZONE_OPEN:
2052 return ATA_ZM_OPEN_ZONE;
2053 case DISK_ZONE_CLOSE:
2054 return ATA_ZM_CLOSE_ZONE;
2055 case DISK_ZONE_FINISH:
2056 return ATA_ZM_FINISH_ZONE;
2065 ada_zone_cmd(struct cam_periph *periph, union ccb *ccb, struct bio *bp,
2068 struct ada_softc *softc;
2073 if (bp->bio_cmd != BIO_ZONE) {
2078 softc = periph->softc;
2080 switch (bp->bio_zone.zone_cmd) {
2081 case DISK_ZONE_OPEN:
2082 case DISK_ZONE_CLOSE:
2083 case DISK_ZONE_FINISH:
2084 case DISK_ZONE_RWP: {
2089 zone_sa = ada_zone_bio_to_ata(bp->bio_zone.zone_cmd);
2090 if (zone_sa == -1) {
2091 xpt_print(periph->path, "Cannot translate zone "
2092 "cmd %#x to ATA\n", bp->bio_zone.zone_cmd);
2098 lba = bp->bio_zone.zone_params.rwp.id;
2100 if (bp->bio_zone.zone_params.rwp.flags &
2101 DISK_ZONE_RWP_FLAG_ALL)
2102 zone_flags |= ZBC_OUT_ALL;
2104 ata_zac_mgmt_out(&ccb->ataio,
2105 /*retries*/ ada_retry_count,
2107 /*use_ncq*/ (softc->flags &
2108 ADA_FLAG_PIM_ATA_EXT) ? 1 : 0,
2109 /*zm_action*/ zone_sa,
2111 /*zone_flags*/ zone_flags,
2115 /*timeout*/ ada_default_timeout * 1000);
2120 case DISK_ZONE_REPORT_ZONES: {
2122 uint32_t num_entries, alloc_size;
2123 struct disk_zone_report *rep;
2125 rep = &bp->bio_zone.zone_params.report;
2127 num_entries = rep->entries_allocated;
2128 if (num_entries == 0) {
2129 xpt_print(periph->path, "No entries allocated for "
2130 "Report Zones request\n");
2134 alloc_size = sizeof(struct scsi_report_zones_hdr) +
2135 (sizeof(struct scsi_report_zones_desc) * num_entries);
2136 alloc_size = min(alloc_size, softc->disk->d_maxsize);
2137 rz_ptr = malloc(alloc_size, M_ATADA, M_NOWAIT | M_ZERO);
2138 if (rz_ptr == NULL) {
2139 xpt_print(periph->path, "Unable to allocate memory "
2140 "for Report Zones request\n");
2145 ata_zac_mgmt_in(&ccb->ataio,
2146 /*retries*/ ada_retry_count,
2148 /*use_ncq*/ (softc->flags &
2149 ADA_FLAG_PIM_ATA_EXT) ? 1 : 0,
2150 /*zm_action*/ ATA_ZM_REPORT_ZONES,
2151 /*zone_id*/ rep->starting_id,
2152 /*zone_flags*/ rep->rep_options,
2153 /*data_ptr*/ rz_ptr,
2154 /*dxfer_len*/ alloc_size,
2155 /*timeout*/ ada_default_timeout * 1000);
2158 * For BIO_ZONE, this isn't normally needed. However, it
2159 * is used by devstat_end_transaction_bio() to determine
2160 * how much data was transferred.
2163 * XXX KDM we have a problem. But I'm not sure how to fix
2164 * it. devstat uses bio_bcount - bio_resid to calculate
2165 * the amount of data transferred. The GEOM disk code
2166 * uses bio_length - bio_resid to calculate the amount of
2167 * data in bio_completed. We have different structure
2168 * sizes above and below the ada(4) driver. So, if we
2169 * use the sizes above, the amount transferred won't be
2170 * quite accurate for devstat. If we use different sizes
2171 * for bio_bcount and bio_length (above and below
2172 * respectively), then the residual needs to match one or
2173 * the other. Everything is calculated after the bio
2174 * leaves the driver, so changing the values around isn't
2175 * really an option. For now, just set the count to the
2176 * passed in length. This means that the calculations
2177 * above (e.g. bio_completed) will be correct, but the
2178 * amount of data reported to devstat will be slightly
2179 * under or overstated.
2181 bp->bio_bcount = bp->bio_length;
2187 case DISK_ZONE_GET_PARAMS: {
2188 struct disk_zone_disk_params *params;
2190 params = &bp->bio_zone.zone_params.disk_params;
2191 bzero(params, sizeof(*params));
2193 switch (softc->zone_mode) {
2194 case ADA_ZONE_DRIVE_MANAGED:
2195 params->zone_mode = DISK_ZONE_MODE_DRIVE_MANAGED;
2197 case ADA_ZONE_HOST_AWARE:
2198 params->zone_mode = DISK_ZONE_MODE_HOST_AWARE;
2200 case ADA_ZONE_HOST_MANAGED:
2201 params->zone_mode = DISK_ZONE_MODE_HOST_MANAGED;
2205 params->zone_mode = DISK_ZONE_MODE_NONE;
2209 if (softc->zone_flags & ADA_ZONE_FLAG_URSWRZ)
2210 params->flags |= DISK_ZONE_DISK_URSWRZ;
2212 if (softc->zone_flags & ADA_ZONE_FLAG_OPT_SEQ_SET) {
2213 params->optimal_seq_zones = softc->optimal_seq_zones;
2214 params->flags |= DISK_ZONE_OPT_SEQ_SET;
2217 if (softc->zone_flags & ADA_ZONE_FLAG_OPT_NONSEQ_SET) {
2218 params->optimal_nonseq_zones =
2219 softc->optimal_nonseq_zones;
2220 params->flags |= DISK_ZONE_OPT_NONSEQ_SET;
2223 if (softc->zone_flags & ADA_ZONE_FLAG_MAX_SEQ_SET) {
2224 params->max_seq_zones = softc->max_seq_zones;
2225 params->flags |= DISK_ZONE_MAX_SEQ_SET;
2227 if (softc->zone_flags & ADA_ZONE_FLAG_RZ_SUP)
2228 params->flags |= DISK_ZONE_RZ_SUP;
2230 if (softc->zone_flags & ADA_ZONE_FLAG_OPEN_SUP)
2231 params->flags |= DISK_ZONE_OPEN_SUP;
2233 if (softc->zone_flags & ADA_ZONE_FLAG_CLOSE_SUP)
2234 params->flags |= DISK_ZONE_CLOSE_SUP;
2236 if (softc->zone_flags & ADA_ZONE_FLAG_FINISH_SUP)
2237 params->flags |= DISK_ZONE_FINISH_SUP;
2239 if (softc->zone_flags & ADA_ZONE_FLAG_RWP_SUP)
2240 params->flags |= DISK_ZONE_RWP_SUP;
2251 adastart(struct cam_periph *periph, union ccb *start_ccb)
2253 struct ada_softc *softc = (struct ada_softc *)periph->softc;
2254 struct ccb_ataio *ataio = &start_ccb->ataio;
2256 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("adastart\n"));
2258 switch (softc->state) {
2259 case ADA_STATE_NORMAL:
2264 bp = cam_iosched_next_bio(softc->cam_iosched);
2266 xpt_release_ccb(start_ccb);
2270 if ((bp->bio_flags & BIO_ORDERED) != 0 ||
2271 (bp->bio_cmd != BIO_DELETE && (softc->flags & ADA_FLAG_NEED_OTAG) != 0)) {
2272 softc->flags &= ~ADA_FLAG_NEED_OTAG;
2273 softc->flags |= ADA_FLAG_WAS_OTAG;
2278 switch (bp->bio_cmd) {
2282 uint64_t lba = bp->bio_pblkno;
2283 uint16_t count = bp->bio_bcount / softc->params.secsize;
2287 if (bp->bio_cmd == BIO_WRITE) {
2288 softc->flags |= ADA_FLAG_DIRTY;
2289 rw_op = CAM_DIR_OUT;
2294 data_ptr = bp->bio_data;
2295 if ((bp->bio_flags & (BIO_UNMAPPED|BIO_VLIST)) != 0) {
2296 rw_op |= CAM_DATA_BIO;
2300 #ifdef CAM_TEST_FAILURE
2304 * Support the failure ioctls. If the command is a
2305 * read, and there are pending forced read errors, or
2306 * if a write and pending write errors, then fail this
2307 * operation with EIO. This is useful for testing
2308 * purposes. Also, support having every Nth read fail.
2310 * This is a rather blunt tool.
2312 if (bp->bio_cmd == BIO_READ) {
2313 if (softc->force_read_error) {
2314 softc->force_read_error--;
2317 if (softc->periodic_read_error > 0) {
2318 if (++softc->periodic_read_count >=
2319 softc->periodic_read_error) {
2320 softc->periodic_read_count = 0;
2325 if (softc->force_write_error) {
2326 softc->force_write_error--;
2331 biofinish(bp, NULL, EIO);
2332 xpt_release_ccb(start_ccb);
2333 adaschedule(periph);
2337 KASSERT((bp->bio_flags & BIO_UNMAPPED) == 0 ||
2338 round_page(bp->bio_bcount + bp->bio_ma_offset) /
2339 PAGE_SIZE == bp->bio_ma_n,
2340 ("Short bio %p", bp));
2341 cam_fill_ataio(ataio,
2348 ada_default_timeout*1000);
2350 if ((softc->flags & ADA_FLAG_CAN_NCQ) && tag_code) {
2351 if (bp->bio_cmd == BIO_READ) {
2352 ata_ncq_cmd(ataio, ATA_READ_FPDMA_QUEUED,
2355 ata_ncq_cmd(ataio, ATA_WRITE_FPDMA_QUEUED,
2358 } else if ((softc->flags & ADA_FLAG_CAN_48BIT) &&
2359 (lba + count >= ATA_MAX_28BIT_LBA ||
2361 if (softc->flags & ADA_FLAG_CAN_DMA48) {
2362 if (bp->bio_cmd == BIO_READ) {
2363 ata_48bit_cmd(ataio, ATA_READ_DMA48,
2366 ata_48bit_cmd(ataio, ATA_WRITE_DMA48,
2370 if (bp->bio_cmd == BIO_READ) {
2371 ata_48bit_cmd(ataio, ATA_READ_MUL48,
2374 ata_48bit_cmd(ataio, ATA_WRITE_MUL48,
2381 if (softc->flags & ADA_FLAG_CAN_DMA) {
2382 if (bp->bio_cmd == BIO_READ) {
2383 ata_28bit_cmd(ataio, ATA_READ_DMA,
2386 ata_28bit_cmd(ataio, ATA_WRITE_DMA,
2390 if (bp->bio_cmd == BIO_READ) {
2391 ata_28bit_cmd(ataio, ATA_READ_MUL,
2394 ata_28bit_cmd(ataio, ATA_WRITE_MUL,
2402 switch (softc->delete_method) {
2403 case ADA_DELETE_NCQ_DSM_TRIM:
2404 ada_ncq_dsmtrim(softc, bp, ataio);
2406 case ADA_DELETE_DSM_TRIM:
2407 ada_dsmtrim(softc, bp, ataio);
2409 case ADA_DELETE_CFA_ERASE:
2410 ada_cfaerase(softc, bp, ataio);
2413 biofinish(bp, NULL, EOPNOTSUPP);
2414 xpt_release_ccb(start_ccb);
2415 adaschedule(periph);
2418 start_ccb->ccb_h.ccb_state = ADA_CCB_TRIM;
2419 start_ccb->ccb_h.flags |= CAM_UNLOCKED;
2420 cam_iosched_submit_trim(softc->cam_iosched);
2423 cam_fill_ataio(ataio,
2430 ada_default_timeout*1000);
2432 if (softc->flags & ADA_FLAG_CAN_48BIT)
2433 ata_48bit_cmd(ataio, ATA_FLUSHCACHE48, 0, 0, 0);
2435 ata_28bit_cmd(ataio, ATA_FLUSHCACHE, 0, 0, 0);
2438 int error, queue_ccb;
2442 error = ada_zone_cmd(periph, start_ccb, bp, &queue_ccb);
2444 || (queue_ccb == 0)) {
2445 biofinish(bp, NULL, error);
2446 xpt_release_ccb(start_ccb);
2452 start_ccb->ccb_h.ccb_state = ADA_CCB_BUFFER_IO;
2453 start_ccb->ccb_h.flags |= CAM_UNLOCKED;
2455 start_ccb->ccb_h.ccb_bp = bp;
2456 softc->outstanding_cmds++;
2458 cam_periph_unlock(periph);
2459 xpt_action(start_ccb);
2460 cam_periph_lock(periph);
2463 /* May have more work to do, so ensure we stay scheduled */
2464 adaschedule(periph);
2467 case ADA_STATE_RAHEAD:
2468 case ADA_STATE_WCACHE:
2470 cam_fill_ataio(ataio,
2477 ada_default_timeout*1000);
2479 if (softc->state == ADA_STATE_RAHEAD) {
2480 ata_28bit_cmd(ataio, ATA_SETFEATURES, ADA_RA ?
2481 ATA_SF_ENAB_RCACHE : ATA_SF_DIS_RCACHE, 0, 0);
2482 start_ccb->ccb_h.ccb_state = ADA_CCB_RAHEAD;
2484 ata_28bit_cmd(ataio, ATA_SETFEATURES, ADA_WC ?
2485 ATA_SF_ENAB_WCACHE : ATA_SF_DIS_WCACHE, 0, 0);
2486 start_ccb->ccb_h.ccb_state = ADA_CCB_WCACHE;
2488 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2489 xpt_action(start_ccb);
2492 case ADA_STATE_LOGDIR:
2494 struct ata_gp_log_dir *log_dir;
2496 if ((softc->flags & ADA_FLAG_CAN_LOG) == 0) {
2497 adaprobedone(periph, start_ccb);
2501 log_dir = malloc(sizeof(*log_dir), M_ATADA, M_NOWAIT|M_ZERO);
2502 if (log_dir == NULL) {
2503 xpt_print(periph->path, "Couldn't malloc log_dir "
2505 softc->state = ADA_STATE_NORMAL;
2506 xpt_release_ccb(start_ccb);
2514 /*log_address*/ ATA_LOG_DIRECTORY,
2517 /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ?
2519 /*data_ptr*/ (uint8_t *)log_dir,
2520 /*dxfer_len*/sizeof(*log_dir),
2521 /*timeout*/ada_default_timeout*1000);
2523 start_ccb->ccb_h.ccb_state = ADA_CCB_LOGDIR;
2524 xpt_action(start_ccb);
2527 case ADA_STATE_IDDIR:
2529 struct ata_identify_log_pages *id_dir;
2531 id_dir = malloc(sizeof(*id_dir), M_ATADA, M_NOWAIT | M_ZERO);
2532 if (id_dir == NULL) {
2533 xpt_print(periph->path, "Couldn't malloc id_dir "
2535 adaprobedone(periph, start_ccb);
2542 /*log_address*/ ATA_IDENTIFY_DATA_LOG,
2543 /*page_number*/ ATA_IDL_PAGE_LIST,
2545 /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ?
2547 /*data_ptr*/ (uint8_t *)id_dir,
2548 /*dxfer_len*/ sizeof(*id_dir),
2549 /*timeout*/ada_default_timeout*1000);
2551 start_ccb->ccb_h.ccb_state = ADA_CCB_IDDIR;
2552 xpt_action(start_ccb);
2555 case ADA_STATE_SUP_CAP:
2557 struct ata_identify_log_sup_cap *sup_cap;
2559 sup_cap = malloc(sizeof(*sup_cap), M_ATADA, M_NOWAIT|M_ZERO);
2560 if (sup_cap == NULL) {
2561 xpt_print(periph->path, "Couldn't malloc sup_cap "
2563 adaprobedone(periph, start_ccb);
2570 /*log_address*/ ATA_IDENTIFY_DATA_LOG,
2571 /*page_number*/ ATA_IDL_SUP_CAP,
2573 /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ?
2575 /*data_ptr*/ (uint8_t *)sup_cap,
2576 /*dxfer_len*/ sizeof(*sup_cap),
2577 /*timeout*/ada_default_timeout*1000);
2579 start_ccb->ccb_h.ccb_state = ADA_CCB_SUP_CAP;
2580 xpt_action(start_ccb);
2583 case ADA_STATE_ZONE:
2585 struct ata_zoned_info_log *ata_zone;
2587 ata_zone = malloc(sizeof(*ata_zone), M_ATADA, M_NOWAIT|M_ZERO);
2588 if (ata_zone == NULL) {
2589 xpt_print(periph->path, "Couldn't malloc ata_zone "
2591 adaprobedone(periph, start_ccb);
2598 /*log_address*/ ATA_IDENTIFY_DATA_LOG,
2599 /*page_number*/ ATA_IDL_ZDI,
2601 /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ?
2603 /*data_ptr*/ (uint8_t *)ata_zone,
2604 /*dxfer_len*/ sizeof(*ata_zone),
2605 /*timeout*/ada_default_timeout*1000);
2607 start_ccb->ccb_h.ccb_state = ADA_CCB_ZONE;
2608 xpt_action(start_ccb);
2615 adaprobedone(struct cam_periph *periph, union ccb *ccb)
2617 struct ada_softc *softc;
2619 softc = (struct ada_softc *)periph->softc;
2622 xpt_release_ccb(ccb);
2624 softc->state = ADA_STATE_NORMAL;
2625 softc->flags |= ADA_FLAG_PROBED;
2626 adaschedule(periph);
2627 if ((softc->flags & ADA_FLAG_ANNOUNCED) == 0) {
2628 softc->flags |= ADA_FLAG_ANNOUNCED;
2629 cam_periph_unhold(periph);
2631 cam_periph_release_locked(periph);
2636 adazonedone(struct cam_periph *periph, union ccb *ccb)
2640 bp = (struct bio *)ccb->ccb_h.ccb_bp;
2642 switch (bp->bio_zone.zone_cmd) {
2643 case DISK_ZONE_OPEN:
2644 case DISK_ZONE_CLOSE:
2645 case DISK_ZONE_FINISH:
2648 case DISK_ZONE_REPORT_ZONES: {
2650 struct disk_zone_report *rep;
2651 struct scsi_report_zones_hdr *hdr;
2652 struct scsi_report_zones_desc *desc;
2653 struct disk_zone_rep_entry *entry;
2654 uint32_t hdr_len, num_avail;
2655 uint32_t num_to_fill, i;
2657 rep = &bp->bio_zone.zone_params.report;
2658 avail_len = ccb->ataio.dxfer_len - ccb->ataio.resid;
2660 * Note that bio_resid isn't normally used for zone
2661 * commands, but it is used by devstat_end_transaction_bio()
2662 * to determine how much data was transferred. Because
2663 * the size of the SCSI/ATA data structures is different
2664 * than the size of the BIO interface structures, the
2665 * amount of data actually transferred from the drive will
2666 * be different than the amount of data transferred to
2669 hdr = (struct scsi_report_zones_hdr *)ccb->ataio.data_ptr;
2670 if (avail_len < sizeof(*hdr)) {
2672 * Is there a better error than EIO here? We asked
2673 * for at least the header, and we got less than
2676 bp->bio_error = EIO;
2677 bp->bio_flags |= BIO_ERROR;
2678 bp->bio_resid = bp->bio_bcount;
2682 hdr_len = le32dec(hdr->length);
2684 rep->entries_available = hdr_len / sizeof(*desc);
2686 rep->entries_available = 0;
2688 * NOTE: using the same values for the BIO version of the
2689 * same field as the SCSI/ATA values. This means we could
2690 * get some additional values that aren't defined in bio.h
2691 * if more values of the same field are defined later.
2693 rep->header.same = hdr->byte4 & SRZ_SAME_MASK;
2694 rep->header.maximum_lba = le64dec(hdr->maximum_lba);
2696 * If the drive reports no entries that match the query,
2700 rep->entries_filled = 0;
2701 bp->bio_resid = bp->bio_bcount;
2705 num_avail = min((avail_len - sizeof(*hdr)) / sizeof(*desc),
2706 hdr_len / sizeof(*desc));
2708 * If the drive didn't return any data, then we're done.
2710 if (num_avail == 0) {
2711 rep->entries_filled = 0;
2712 bp->bio_resid = bp->bio_bcount;
2716 num_to_fill = min(num_avail, rep->entries_allocated);
2718 * If the user didn't allocate any entries for us to fill,
2721 if (num_to_fill == 0) {
2722 rep->entries_filled = 0;
2723 bp->bio_resid = bp->bio_bcount;
2727 for (i = 0, desc = &hdr->desc_list[0], entry=&rep->entries[0];
2728 i < num_to_fill; i++, desc++, entry++) {
2730 * NOTE: we're mapping the values here directly
2731 * from the SCSI/ATA bit definitions to the bio.h
2732 * definitions. There is also a warning in
2733 * disk_zone.h, but the impact is that if
2734 * additional values are added in the SCSI/ATA
2735 * specs these will be visible to consumers of
2738 entry->zone_type = desc->zone_type & SRZ_TYPE_MASK;
2739 entry->zone_condition =
2740 (desc->zone_flags & SRZ_ZONE_COND_MASK) >>
2741 SRZ_ZONE_COND_SHIFT;
2742 entry->zone_flags |= desc->zone_flags &
2743 (SRZ_ZONE_NON_SEQ|SRZ_ZONE_RESET);
2744 entry->zone_length = le64dec(desc->zone_length);
2745 entry->zone_start_lba = le64dec(desc->zone_start_lba);
2746 entry->write_pointer_lba =
2747 le64dec(desc->write_pointer_lba);
2749 rep->entries_filled = num_to_fill;
2751 * Note that this residual is accurate from the user's
2752 * standpoint, but the amount transferred isn't accurate
2753 * from the standpoint of what actually came back from the
2756 bp->bio_resid = bp->bio_bcount - (num_to_fill * sizeof(*entry));
2759 case DISK_ZONE_GET_PARAMS:
2762 * In theory we should not get a GET_PARAMS bio, since it
2763 * should be handled without queueing the command to the
2766 panic("%s: Invalid zone command %d", __func__,
2767 bp->bio_zone.zone_cmd);
2771 if (bp->bio_zone.zone_cmd == DISK_ZONE_REPORT_ZONES)
2772 free(ccb->ataio.data_ptr, M_ATADA);
2777 adadone(struct cam_periph *periph, union ccb *done_ccb)
2779 struct ada_softc *softc;
2780 struct ccb_ataio *ataio;
2781 struct cam_path *path;
2785 softc = (struct ada_softc *)periph->softc;
2786 ataio = &done_ccb->ataio;
2787 path = done_ccb->ccb_h.path;
2788 priority = done_ccb->ccb_h.pinfo.priority;
2790 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("adadone\n"));
2792 state = ataio->ccb_h.ccb_state & ADA_CCB_TYPE_MASK;
2794 case ADA_CCB_BUFFER_IO:
2800 cam_periph_lock(periph);
2801 bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
2802 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
2803 error = adaerror(done_ccb, 0, 0);
2804 if (error == ERESTART) {
2805 /* A retry was scheduled, so just return. */
2806 cam_periph_unlock(periph);
2809 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
2810 cam_release_devq(path,
2814 /*getcount_only*/0);
2816 * If we get an error on an NCQ DSM TRIM, fall back
2817 * to a non-NCQ DSM TRIM forever. Please note that if
2818 * CAN_NCQ_TRIM is set, CAN_TRIM is necessarily set too.
2819 * However, for this one trim, we treat it as advisory
2820 * and return success up the stack.
2822 if (state == ADA_CCB_TRIM &&
2824 (softc->flags & ADA_FLAG_CAN_NCQ_TRIM) != 0) {
2825 softc->flags &= ~ADA_FLAG_CAN_NCQ_TRIM;
2827 adasetdeletemethod(softc);
2830 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
2831 panic("REQ_CMP with QFRZN");
2835 bp->bio_error = error;
2837 bp->bio_resid = bp->bio_bcount;
2838 bp->bio_flags |= BIO_ERROR;
2840 if (bp->bio_cmd == BIO_ZONE)
2841 adazonedone(periph, done_ccb);
2842 else if (state == ADA_CCB_TRIM)
2845 bp->bio_resid = ataio->resid;
2847 if ((bp->bio_resid > 0)
2848 && (bp->bio_cmd != BIO_ZONE))
2849 bp->bio_flags |= BIO_ERROR;
2851 softc->outstanding_cmds--;
2852 if (softc->outstanding_cmds == 0)
2853 softc->flags |= ADA_FLAG_WAS_OTAG;
2856 * We need to call cam_iosched before we call biodone so that we
2857 * don't measure any activity that happens in the completion
2858 * routine, which in the case of sendfile can be quite
2861 cam_iosched_bio_complete(softc->cam_iosched, bp, done_ccb);
2862 xpt_release_ccb(done_ccb);
2863 if (state == ADA_CCB_TRIM) {
2864 TAILQ_HEAD(, bio) queue;
2868 TAILQ_CONCAT(&queue, &softc->trim_req.bps, bio_queue);
2870 * Normally, the xpt_release_ccb() above would make sure
2871 * that when we have more work to do, that work would
2872 * get kicked off. However, we specifically keep
2873 * trim_running set to 0 before the call above to allow
2874 * other I/O to progress when many BIO_DELETE requests
2875 * are pushed down. We set trim_running to 0 and call
2876 * daschedule again so that we don't stall if there are
2877 * no other I/Os pending apart from BIO_DELETEs.
2879 cam_iosched_trim_done(softc->cam_iosched);
2880 adaschedule(periph);
2881 cam_periph_unlock(periph);
2882 while ((bp1 = TAILQ_FIRST(&queue)) != NULL) {
2883 TAILQ_REMOVE(&queue, bp1, bio_queue);
2884 bp1->bio_error = error;
2886 bp1->bio_flags |= BIO_ERROR;
2887 bp1->bio_resid = bp1->bio_bcount;
2893 adaschedule(periph);
2894 cam_periph_unlock(periph);
2899 case ADA_CCB_RAHEAD:
2901 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
2902 if (adaerror(done_ccb, 0, 0) == ERESTART) {
2903 /* Drop freeze taken due to CAM_DEV_QFREEZE */
2904 cam_release_devq(path, 0, 0, 0, FALSE);
2906 } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
2907 cam_release_devq(path,
2911 /*getcount_only*/0);
2916 * Since our peripheral may be invalidated by an error
2917 * above or an external event, we must release our CCB
2918 * before releasing the reference on the peripheral.
2919 * The peripheral will only go away once the last reference
2920 * is removed, and we need it around for the CCB release
2924 xpt_release_ccb(done_ccb);
2925 softc->state = ADA_STATE_WCACHE;
2926 xpt_schedule(periph, priority);
2927 /* Drop freeze taken due to CAM_DEV_QFREEZE */
2928 cam_release_devq(path, 0, 0, 0, FALSE);
2931 case ADA_CCB_WCACHE:
2933 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
2934 if (adaerror(done_ccb, 0, 0) == ERESTART) {
2935 /* Drop freeze taken due to CAM_DEV_QFREEZE */
2936 cam_release_devq(path, 0, 0, 0, FALSE);
2938 } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
2939 cam_release_devq(path,
2943 /*getcount_only*/0);
2947 /* Drop freeze taken due to CAM_DEV_QFREEZE */
2948 cam_release_devq(path, 0, 0, 0, FALSE);
2950 if ((softc->flags & ADA_FLAG_CAN_LOG)
2951 && (softc->zone_mode != ADA_ZONE_NONE)) {
2952 xpt_release_ccb(done_ccb);
2953 softc->state = ADA_STATE_LOGDIR;
2954 xpt_schedule(periph, priority);
2956 adaprobedone(periph, done_ccb);
2960 case ADA_CCB_LOGDIR:
2964 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
2966 softc->valid_logdir_len = 0;
2967 bzero(&softc->ata_logdir, sizeof(softc->ata_logdir));
2968 softc->valid_logdir_len =
2969 ataio->dxfer_len - ataio->resid;
2970 if (softc->valid_logdir_len > 0)
2971 bcopy(ataio->data_ptr, &softc->ata_logdir,
2972 min(softc->valid_logdir_len,
2973 sizeof(softc->ata_logdir)));
2975 * Figure out whether the Identify Device log is
2976 * supported. The General Purpose log directory
2977 * has a header, and lists the number of pages
2978 * available for each GP log identified by the
2979 * offset into the list.
2981 if ((softc->valid_logdir_len >=
2982 ((ATA_IDENTIFY_DATA_LOG + 1) * sizeof(uint16_t)))
2983 && (le16dec(softc->ata_logdir.header) ==
2984 ATA_GP_LOG_DIR_VERSION)
2985 && (le16dec(&softc->ata_logdir.num_pages[
2986 (ATA_IDENTIFY_DATA_LOG *
2987 sizeof(uint16_t)) - sizeof(uint16_t)]) > 0)){
2988 softc->flags |= ADA_FLAG_CAN_IDLOG;
2990 softc->flags &= ~ADA_FLAG_CAN_IDLOG;
2993 error = adaerror(done_ccb, CAM_RETRY_SELTO,
2994 SF_RETRY_UA|SF_NO_PRINT);
2995 if (error == ERESTART)
2997 else if (error != 0) {
2999 * If we can't get the ATA log directory,
3000 * then ATA logs are effectively not
3001 * supported even if the bit is set in the
3004 softc->flags &= ~(ADA_FLAG_CAN_LOG |
3005 ADA_FLAG_CAN_IDLOG);
3006 if ((done_ccb->ccb_h.status &
3007 CAM_DEV_QFRZN) != 0) {
3008 /* Don't wedge this device's queue */
3009 cam_release_devq(done_ccb->ccb_h.path,
3013 /*getcount_only*/0);
3020 free(ataio->data_ptr, M_ATADA);
3023 && (softc->flags & ADA_FLAG_CAN_IDLOG)) {
3024 softc->state = ADA_STATE_IDDIR;
3025 xpt_release_ccb(done_ccb);
3026 xpt_schedule(periph, priority);
3028 adaprobedone(periph, done_ccb);
3032 case ADA_CCB_IDDIR: {
3035 if ((ataio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
3036 off_t entries_offset, max_entries;
3039 softc->valid_iddir_len = 0;
3040 bzero(&softc->ata_iddir, sizeof(softc->ata_iddir));
3041 softc->flags &= ~(ADA_FLAG_CAN_SUPCAP |
3043 softc->valid_iddir_len =
3044 ataio->dxfer_len - ataio->resid;
3045 if (softc->valid_iddir_len > 0)
3046 bcopy(ataio->data_ptr, &softc->ata_iddir,
3047 min(softc->valid_iddir_len,
3048 sizeof(softc->ata_iddir)));
3051 __offsetof(struct ata_identify_log_pages,entries);
3052 max_entries = softc->valid_iddir_len - entries_offset;
3053 if ((softc->valid_iddir_len > (entries_offset + 1))
3054 && (le64dec(softc->ata_iddir.header) ==
3056 && (softc->ata_iddir.entry_count > 0)) {
3059 num_entries = softc->ata_iddir.entry_count;
3060 num_entries = min(num_entries,
3061 softc->valid_iddir_len - entries_offset);
3062 for (i = 0; i < num_entries &&
3063 i < max_entries; i++) {
3064 if (softc->ata_iddir.entries[i] ==
3067 ADA_FLAG_CAN_SUPCAP;
3068 else if (softc->ata_iddir.entries[i]==
3074 ADA_FLAG_CAN_SUPCAP)
3081 error = adaerror(done_ccb, CAM_RETRY_SELTO,
3082 SF_RETRY_UA|SF_NO_PRINT);
3083 if (error == ERESTART)
3085 else if (error != 0) {
3087 * If we can't get the ATA Identify Data log
3088 * directory, then it effectively isn't
3089 * supported even if the ATA Log directory
3090 * a non-zero number of pages present for
3093 softc->flags &= ~ADA_FLAG_CAN_IDLOG;
3094 if ((done_ccb->ccb_h.status &
3095 CAM_DEV_QFRZN) != 0) {
3096 /* Don't wedge this device's queue */
3097 cam_release_devq(done_ccb->ccb_h.path,
3101 /*getcount_only*/0);
3106 free(ataio->data_ptr, M_ATADA);
3109 && (softc->flags & ADA_FLAG_CAN_SUPCAP)) {
3110 softc->state = ADA_STATE_SUP_CAP;
3111 xpt_release_ccb(done_ccb);
3112 xpt_schedule(periph, priority);
3114 adaprobedone(periph, done_ccb);
3117 case ADA_CCB_SUP_CAP: {
3120 if ((ataio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
3123 struct ata_identify_log_sup_cap *sup_cap;
3126 sup_cap = (struct ata_identify_log_sup_cap *)
3128 valid_len = ataio->dxfer_len - ataio->resid;
3130 __offsetof(struct ata_identify_log_sup_cap,
3131 sup_zac_cap) + 1 + sizeof(sup_cap->sup_zac_cap);
3132 if (valid_len >= needed_size) {
3133 uint64_t zoned, zac_cap;
3135 zoned = le64dec(sup_cap->zoned_cap);
3136 if (zoned & ATA_ZONED_VALID) {
3138 * This should have already been
3139 * set, because this is also in the
3140 * ATA identify data.
3142 if ((zoned & ATA_ZONED_MASK) ==
3143 ATA_SUPPORT_ZONE_HOST_AWARE)
3145 ADA_ZONE_HOST_AWARE;
3146 else if ((zoned & ATA_ZONED_MASK) ==
3147 ATA_SUPPORT_ZONE_DEV_MANAGED)
3149 ADA_ZONE_DRIVE_MANAGED;
3152 zac_cap = le64dec(sup_cap->sup_zac_cap);
3153 if (zac_cap & ATA_SUP_ZAC_CAP_VALID) {
3154 if (zac_cap & ATA_REPORT_ZONES_SUP)
3155 softc->zone_flags |=
3156 ADA_ZONE_FLAG_RZ_SUP;
3157 if (zac_cap & ATA_ND_OPEN_ZONE_SUP)
3158 softc->zone_flags |=
3159 ADA_ZONE_FLAG_OPEN_SUP;
3160 if (zac_cap & ATA_ND_CLOSE_ZONE_SUP)
3161 softc->zone_flags |=
3162 ADA_ZONE_FLAG_CLOSE_SUP;
3163 if (zac_cap & ATA_ND_FINISH_ZONE_SUP)
3164 softc->zone_flags |=
3165 ADA_ZONE_FLAG_FINISH_SUP;
3166 if (zac_cap & ATA_ND_RWP_SUP)
3167 softc->zone_flags |=
3168 ADA_ZONE_FLAG_RWP_SUP;
3171 * This field was introduced in
3172 * ACS-4, r08 on April 28th, 2015.
3173 * If the drive firmware was written
3174 * to an earlier spec, it won't have
3175 * the field. So, assume all
3176 * commands are supported.
3178 softc->zone_flags |=
3179 ADA_ZONE_FLAG_SUP_MASK;
3184 error = adaerror(done_ccb, CAM_RETRY_SELTO,
3185 SF_RETRY_UA|SF_NO_PRINT);
3186 if (error == ERESTART)
3188 else if (error != 0) {
3190 * If we can't get the ATA Identify Data
3191 * Supported Capabilities page, clear the
3194 softc->flags &= ~ADA_FLAG_CAN_SUPCAP;
3196 * And clear zone capabilities.
3198 softc->zone_flags &= ~ADA_ZONE_FLAG_SUP_MASK;
3199 if ((done_ccb->ccb_h.status &
3200 CAM_DEV_QFRZN) != 0) {
3201 /* Don't wedge this device's queue */
3202 cam_release_devq(done_ccb->ccb_h.path,
3206 /*getcount_only*/0);
3211 free(ataio->data_ptr, M_ATADA);
3214 && (softc->flags & ADA_FLAG_CAN_ZONE)) {
3215 softc->state = ADA_STATE_ZONE;
3216 xpt_release_ccb(done_ccb);
3217 xpt_schedule(periph, priority);
3219 adaprobedone(periph, done_ccb);
3222 case ADA_CCB_ZONE: {
3225 if ((ataio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
3226 struct ata_zoned_info_log *zi_log;
3230 zi_log = (struct ata_zoned_info_log *)ataio->data_ptr;
3232 valid_len = ataio->dxfer_len - ataio->resid;
3233 needed_size = __offsetof(struct ata_zoned_info_log,
3234 version_info) + 1 + sizeof(zi_log->version_info);
3235 if (valid_len >= needed_size) {
3238 tmpvar = le64dec(zi_log->zoned_cap);
3239 if (tmpvar & ATA_ZDI_CAP_VALID) {
3240 if (tmpvar & ATA_ZDI_CAP_URSWRZ)
3241 softc->zone_flags |=
3242 ADA_ZONE_FLAG_URSWRZ;
3244 softc->zone_flags &=
3245 ~ADA_ZONE_FLAG_URSWRZ;
3247 tmpvar = le64dec(zi_log->optimal_seq_zones);
3248 if (tmpvar & ATA_ZDI_OPT_SEQ_VALID) {
3249 softc->zone_flags |=
3250 ADA_ZONE_FLAG_OPT_SEQ_SET;
3251 softc->optimal_seq_zones = (tmpvar &
3252 ATA_ZDI_OPT_SEQ_MASK);
3254 softc->zone_flags &=
3255 ~ADA_ZONE_FLAG_OPT_SEQ_SET;
3256 softc->optimal_seq_zones = 0;
3259 tmpvar =le64dec(zi_log->optimal_nonseq_zones);
3260 if (tmpvar & ATA_ZDI_OPT_NS_VALID) {
3261 softc->zone_flags |=
3262 ADA_ZONE_FLAG_OPT_NONSEQ_SET;
3263 softc->optimal_nonseq_zones =
3264 (tmpvar & ATA_ZDI_OPT_NS_MASK);
3266 softc->zone_flags &=
3267 ~ADA_ZONE_FLAG_OPT_NONSEQ_SET;
3268 softc->optimal_nonseq_zones = 0;
3271 tmpvar = le64dec(zi_log->max_seq_req_zones);
3272 if (tmpvar & ATA_ZDI_MAX_SEQ_VALID) {
3273 softc->zone_flags |=
3274 ADA_ZONE_FLAG_MAX_SEQ_SET;
3275 softc->max_seq_zones =
3276 (tmpvar & ATA_ZDI_MAX_SEQ_MASK);
3278 softc->zone_flags &=
3279 ~ADA_ZONE_FLAG_MAX_SEQ_SET;
3280 softc->max_seq_zones = 0;
3284 error = adaerror(done_ccb, CAM_RETRY_SELTO,
3285 SF_RETRY_UA|SF_NO_PRINT);
3286 if (error == ERESTART)
3288 else if (error != 0) {
3289 softc->flags &= ~ADA_FLAG_CAN_ZONE;
3290 softc->flags &= ~ADA_ZONE_FLAG_SET_MASK;
3292 if ((done_ccb->ccb_h.status &
3293 CAM_DEV_QFRZN) != 0) {
3294 /* Don't wedge this device's queue */
3295 cam_release_devq(done_ccb->ccb_h.path,
3299 /*getcount_only*/0);
3304 free(ataio->data_ptr, M_ATADA);
3306 adaprobedone(periph, done_ccb);
3310 /* No-op. We're polling */
3315 xpt_release_ccb(done_ccb);
3319 adaerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
3322 struct ada_softc *softc;
3323 struct cam_periph *periph;
3325 periph = xpt_path_periph(ccb->ccb_h.path);
3326 softc = (struct ada_softc *)periph->softc;
3328 switch (ccb->ccb_h.status & CAM_STATUS_MASK) {
3329 case CAM_CMD_TIMEOUT:
3332 case CAM_REQ_ABORTED:
3333 case CAM_REQ_CMP_ERR:
3334 case CAM_REQ_TERMIO:
3335 case CAM_UNREC_HBA_ERROR:
3336 case CAM_DATA_RUN_ERR:
3337 case CAM_ATA_STATUS_ERROR:
3345 return(cam_periph_error(ccb, cam_flags, sense_flags));
3349 adagetparams(struct cam_periph *periph, struct ccb_getdev *cgd)
3351 struct ada_softc *softc = (struct ada_softc *)periph->softc;
3352 struct disk_params *dp = &softc->params;
3353 u_int64_t lbasize48;
3356 dp->secsize = ata_logical_sector_size(&cgd->ident_data);
3357 if ((cgd->ident_data.atavalid & ATA_FLAG_54_58) &&
3358 cgd->ident_data.current_heads && cgd->ident_data.current_sectors) {
3359 dp->heads = cgd->ident_data.current_heads;
3360 dp->secs_per_track = cgd->ident_data.current_sectors;
3361 dp->cylinders = cgd->ident_data.cylinders;
3362 dp->sectors = (u_int32_t)cgd->ident_data.current_size_1 |
3363 ((u_int32_t)cgd->ident_data.current_size_2 << 16);
3365 dp->heads = cgd->ident_data.heads;
3366 dp->secs_per_track = cgd->ident_data.sectors;
3367 dp->cylinders = cgd->ident_data.cylinders;
3368 dp->sectors = cgd->ident_data.cylinders *
3369 (u_int32_t)(dp->heads * dp->secs_per_track);
3371 lbasize = (u_int32_t)cgd->ident_data.lba_size_1 |
3372 ((u_int32_t)cgd->ident_data.lba_size_2 << 16);
3374 /* use the 28bit LBA size if valid or bigger than the CHS mapping */
3375 if (cgd->ident_data.cylinders == 16383 || dp->sectors < lbasize)
3376 dp->sectors = lbasize;
3378 /* use the 48bit LBA size if valid */
3379 lbasize48 = ((u_int64_t)cgd->ident_data.lba_size48_1) |
3380 ((u_int64_t)cgd->ident_data.lba_size48_2 << 16) |
3381 ((u_int64_t)cgd->ident_data.lba_size48_3 << 32) |
3382 ((u_int64_t)cgd->ident_data.lba_size48_4 << 48);
3383 if ((cgd->ident_data.support.command2 & ATA_SUPPORT_ADDRESS48) &&
3384 lbasize48 > ATA_MAX_28BIT_LBA)
3385 dp->sectors = lbasize48;
3389 adasendorderedtag(void *arg)
3391 struct ada_softc *softc = arg;
3393 if (ada_send_ordered) {
3394 if (softc->outstanding_cmds > 0) {
3395 if ((softc->flags & ADA_FLAG_WAS_OTAG) == 0)
3396 softc->flags |= ADA_FLAG_NEED_OTAG;
3397 softc->flags &= ~ADA_FLAG_WAS_OTAG;
3400 /* Queue us up again */
3401 callout_reset(&softc->sendordered_c,
3402 (ada_default_timeout * hz) / ADA_ORDEREDTAG_INTERVAL,
3403 adasendorderedtag, softc);
3407 * Step through all ADA peripheral drivers, and if the device is still open,
3408 * sync the disk cache to physical media.
3413 struct cam_periph *periph;
3414 struct ada_softc *softc;
3418 CAM_PERIPH_FOREACH(periph, &adadriver) {
3419 softc = (struct ada_softc *)periph->softc;
3420 if (SCHEDULER_STOPPED()) {
3421 /* If we paniced with the lock held, do not recurse. */
3422 if (!cam_periph_owned(periph) &&
3423 (softc->flags & ADA_FLAG_OPEN)) {
3424 adadump(softc->disk, NULL, 0, 0, 0);
3428 cam_periph_lock(periph);
3430 * We only sync the cache if the drive is still open, and
3431 * if the drive is capable of it..
3433 if (((softc->flags & ADA_FLAG_OPEN) == 0) ||
3434 (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) == 0) {
3435 cam_periph_unlock(periph);
3439 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
3440 cam_fill_ataio(&ccb->ataio,
3447 ada_default_timeout*1000);
3448 if (softc->flags & ADA_FLAG_CAN_48BIT)
3449 ata_48bit_cmd(&ccb->ataio, ATA_FLUSHCACHE48, 0, 0, 0);
3451 ata_28bit_cmd(&ccb->ataio, ATA_FLUSHCACHE, 0, 0, 0);
3453 error = cam_periph_runccb(ccb, adaerror, /*cam_flags*/0,
3454 /*sense_flags*/ SF_NO_RECOVERY | SF_NO_RETRY,
3455 softc->disk->d_devstat);
3457 xpt_print(periph->path, "Synchronize cache failed\n");
3458 xpt_release_ccb(ccb);
3459 cam_periph_unlock(periph);
3464 adaspindown(uint8_t cmd, int flags)
3466 struct cam_periph *periph;
3467 struct ada_softc *softc;
3468 struct ccb_ataio local_ccb;
3471 CAM_PERIPH_FOREACH(periph, &adadriver) {
3472 /* If we paniced with lock held - not recurse here. */
3473 if (cam_periph_owned(periph))
3475 cam_periph_lock(periph);
3476 softc = (struct ada_softc *)periph->softc;
3478 * We only spin-down the drive if it is capable of it..
3480 if ((softc->flags & ADA_FLAG_CAN_POWERMGT) == 0) {
3481 cam_periph_unlock(periph);
3486 xpt_print(periph->path, "spin-down\n");
3488 memset(&local_ccb, 0, sizeof(local_ccb));
3489 xpt_setup_ccb(&local_ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
3490 local_ccb.ccb_h.ccb_state = ADA_CCB_DUMP;
3492 cam_fill_ataio(&local_ccb,
3495 CAM_DIR_NONE | flags,
3499 ada_default_timeout*1000);
3500 ata_28bit_cmd(&local_ccb, cmd, 0, 0, 0);
3501 error = cam_periph_runccb((union ccb *)&local_ccb, adaerror,
3502 /*cam_flags*/0, /*sense_flags*/ SF_NO_RECOVERY | SF_NO_RETRY,
3503 softc->disk->d_devstat);
3505 xpt_print(periph->path, "Spin-down disk failed\n");
3506 cam_periph_unlock(periph);
3511 adashutdown(void *arg, int howto)
3518 * STANDBY IMMEDIATE saves any volatile data to the drive. It also spins
3519 * down hard drives. IDLE IMMEDIATE also saves the volatile data without
3520 * a spindown. We send the former when we expect to lose power soon. For
3521 * a warm boot, we send the latter to avoid a thundering herd of spinups
3522 * just after the kernel loads while probing. We have to do something to
3523 * flush the data because the BIOS in many systems resets the HBA
3524 * causing a COMINIT/COMRESET negotiation, which some drives interpret
3525 * as license to toss the volatile data, and others count as unclean
3526 * shutdown when in the Active PM state in SMART attributes.
3528 * adaspindown will ensure that we don't send this to a drive that
3529 * doesn't support it.
3531 if (ada_spindown_shutdown != 0) {
3532 how = (howto & (RB_HALT | RB_POWEROFF | RB_POWERCYCLE)) ?
3533 ATA_STANDBY_IMMEDIATE : ATA_IDLE_IMMEDIATE;
3534 adaspindown(how, 0);
3539 adasuspend(void *arg)
3544 * SLEEP also fushes any volatile data, like STANDBY IMEDIATE,
3545 * so we don't need to send it as well.
3547 if (ada_spindown_suspend != 0)
3548 adaspindown(ATA_SLEEP, CAM_DEV_QFREEZE);
3552 adaresume(void *arg)
3554 struct cam_periph *periph;
3555 struct ada_softc *softc;
3557 if (ada_spindown_suspend == 0)
3560 CAM_PERIPH_FOREACH(periph, &adadriver) {
3561 cam_periph_lock(periph);
3562 softc = (struct ada_softc *)periph->softc;
3564 * We only spin-down the drive if it is capable of it..
3566 if ((softc->flags & ADA_FLAG_CAN_POWERMGT) == 0) {
3567 cam_periph_unlock(periph);
3572 xpt_print(periph->path, "resume\n");
3575 * Drop freeze taken due to CAM_DEV_QFREEZE flag set on
3578 cam_release_devq(periph->path,
3582 /*getcount_only*/0);
3584 cam_periph_unlock(periph);
3588 #endif /* _KERNEL */