2 * Common functions for CAM "type" (peripheral) drivers.
4 * Copyright (c) 1997, 1998 Justin T. Gibbs.
5 * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/types.h>
36 #include <sys/malloc.h>
37 #include <sys/kernel.h>
40 #include <sys/mutex.h>
43 #include <sys/devicestat.h>
47 #include <vm/vm_extern.h>
50 #include <cam/cam_ccb.h>
51 #include <cam/cam_queue.h>
52 #include <cam/cam_xpt_periph.h>
53 #include <cam/cam_periph.h>
54 #include <cam/cam_debug.h>
55 #include <cam/cam_sim.h>
57 #include <cam/scsi/scsi_all.h>
58 #include <cam/scsi/scsi_message.h>
59 #include <cam/scsi/scsi_pass.h>
61 static u_int camperiphnextunit(struct periph_driver *p_drv,
62 u_int newunit, int wired,
63 path_id_t pathid, target_id_t target,
65 static u_int camperiphunit(struct periph_driver *p_drv,
66 path_id_t pathid, target_id_t target,
68 static void camperiphdone(struct cam_periph *periph,
70 static void camperiphfree(struct cam_periph *periph);
71 static int camperiphscsistatuserror(union ccb *ccb,
74 u_int32_t sense_flags,
76 u_int32_t *relsim_flags,
79 const char **action_string);
80 static int camperiphscsisenseerror(union ccb *ccb,
83 u_int32_t sense_flags,
85 u_int32_t *relsim_flags,
88 const char **action_string);
90 static int nperiph_drivers;
91 static int initialized = 0;
92 struct periph_driver **periph_drivers;
94 MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers");
96 static int periph_selto_delay = 1000;
97 TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay);
98 static int periph_noresrc_delay = 500;
99 TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay);
100 static int periph_busy_delay = 500;
101 TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay);
105 periphdriver_register(void *data)
107 struct periph_driver *drv = (struct periph_driver *)data;
108 struct periph_driver **newdrivers, **old;
111 ndrivers = nperiph_drivers + 2;
112 newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH,
115 bcopy(periph_drivers, newdrivers,
116 sizeof(*newdrivers) * nperiph_drivers);
117 newdrivers[nperiph_drivers] = drv;
118 newdrivers[nperiph_drivers + 1] = NULL;
119 old = periph_drivers;
120 periph_drivers = newdrivers;
122 free(old, M_CAMPERIPH);
124 /* If driver marked as early or it is late now, initialize it. */
125 if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) ||
131 periphdriver_init(int level)
135 initialized = max(initialized, level);
136 for (i = 0; periph_drivers[i] != NULL; i++) {
137 early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2;
138 if (early == initialized)
139 (*periph_drivers[i]->init)();
144 cam_periph_alloc(periph_ctor_t *periph_ctor,
145 periph_oninv_t *periph_oninvalidate,
146 periph_dtor_t *periph_dtor, periph_start_t *periph_start,
147 char *name, cam_periph_type type, struct cam_path *path,
148 ac_callback_t *ac_callback, ac_code code, void *arg)
150 struct periph_driver **p_drv;
152 struct cam_periph *periph;
153 struct cam_periph *cur_periph;
155 target_id_t target_id;
162 * Handle Hot-Plug scenarios. If there is already a peripheral
163 * of our type assigned to this path, we are likely waiting for
164 * final close on an old, invalidated, peripheral. If this is
165 * the case, queue up a deferred call to the peripheral's async
166 * handler. If it looks like a mistaken re-allocation, complain.
168 if ((periph = cam_periph_find(path, name)) != NULL) {
170 if ((periph->flags & CAM_PERIPH_INVALID) != 0
171 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) {
172 periph->flags |= CAM_PERIPH_NEW_DEV_FOUND;
173 periph->deferred_callback = ac_callback;
174 periph->deferred_ac = code;
175 return (CAM_REQ_INPROG);
177 printf("cam_periph_alloc: attempt to re-allocate "
178 "valid device %s%d rejected flags %#x "
179 "refcount %d\n", periph->periph_name,
180 periph->unit_number, periph->flags,
183 return (CAM_REQ_INVALID);
186 periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH,
190 return (CAM_RESRC_UNAVAIL);
195 sim = xpt_path_sim(path);
196 path_id = xpt_path_path_id(path);
197 target_id = xpt_path_target_id(path);
198 lun_id = xpt_path_lun_id(path);
199 cam_init_pinfo(&periph->pinfo);
200 periph->periph_start = periph_start;
201 periph->periph_dtor = periph_dtor;
202 periph->periph_oninval = periph_oninvalidate;
204 periph->periph_name = name;
205 periph->immediate_priority = CAM_PRIORITY_NONE;
206 periph->refcount = 0;
208 SLIST_INIT(&periph->ccb_list);
209 status = xpt_create_path(&path, periph, path_id, target_id, lun_id);
210 if (status != CAM_REQ_CMP)
215 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
216 if (strcmp((*p_drv)->driver_name, name) == 0)
219 if (*p_drv == NULL) {
220 printf("cam_periph_alloc: invalid periph name '%s'\n", name);
221 xpt_free_path(periph->path);
222 free(periph, M_CAMPERIPH);
224 return (CAM_REQ_INVALID);
226 periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id);
227 cur_periph = TAILQ_FIRST(&(*p_drv)->units);
228 while (cur_periph != NULL
229 && cur_periph->unit_number < periph->unit_number)
230 cur_periph = TAILQ_NEXT(cur_periph, unit_links);
231 if (cur_periph != NULL) {
232 KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list"));
233 TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links);
235 TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links);
236 (*p_drv)->generation++;
242 status = xpt_add_periph(periph);
243 if (status != CAM_REQ_CMP)
247 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n"));
249 status = periph_ctor(periph, arg);
251 if (status == CAM_REQ_CMP)
255 switch (init_level) {
257 /* Initialized successfully */
260 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n"));
261 xpt_remove_periph(periph, /*topology_lock_held*/ 0);
265 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
267 xpt_free_path(periph->path);
270 free(periph, M_CAMPERIPH);
273 /* No cleanup to perform. */
276 panic("%s: Unknown init level", __func__);
282 * Find a peripheral structure with the specified path, target, lun,
283 * and (optionally) type. If the name is NULL, this function will return
284 * the first peripheral driver that matches the specified path.
287 cam_periph_find(struct cam_path *path, char *name)
289 struct periph_driver **p_drv;
290 struct cam_periph *periph;
293 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
295 if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0))
298 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
299 if (xpt_path_comp(periph->path, path) == 0) {
301 mtx_assert(periph->sim->mtx, MA_OWNED);
315 * Find peripheral driver instances attached to the specified path.
318 cam_periph_list(struct cam_path *path, struct sbuf *sb)
320 struct sbuf local_sb;
321 struct periph_driver **p_drv;
322 struct cam_periph *periph;
328 sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN);
331 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
333 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
334 if (xpt_path_comp(periph->path, path) != 0)
337 if (sbuf_len(&local_sb) != 0)
338 sbuf_cat(&local_sb, ",");
340 sbuf_printf(&local_sb, "%s%d", periph->periph_name,
341 periph->unit_number);
343 if (sbuf_error(&local_sb) == ENOMEM) {
346 sbuf_delete(&local_sb);
353 sbuf_finish(&local_sb);
354 sbuf_cpy(sb, sbuf_data(&local_sb));
355 sbuf_delete(&local_sb);
360 cam_periph_acquire(struct cam_periph *periph)
364 status = CAM_REQ_CMP_ERR;
369 if ((periph->flags & CAM_PERIPH_INVALID) == 0) {
371 status = CAM_REQ_CMP;
379 cam_periph_release_locked_buses(struct cam_periph *periph)
381 if (periph->refcount != 0) {
384 panic("%s: release of %p when refcount is zero\n ", __func__,
387 if (periph->refcount == 0
388 && (periph->flags & CAM_PERIPH_INVALID)) {
389 camperiphfree(periph);
394 cam_periph_release_locked(struct cam_periph *periph)
401 cam_periph_release_locked_buses(periph);
406 cam_periph_release(struct cam_periph *periph)
414 mtx_assert(sim->mtx, MA_NOTOWNED);
416 cam_periph_release_locked(periph);
417 mtx_unlock(sim->mtx);
421 cam_periph_hold(struct cam_periph *periph, int priority)
426 * Increment the reference count on the peripheral
427 * while we wait for our lock attempt to succeed
428 * to ensure the peripheral doesn't disappear out
429 * from user us while we sleep.
432 if (cam_periph_acquire(periph) != CAM_REQ_CMP)
435 mtx_assert(periph->sim->mtx, MA_OWNED);
436 while ((periph->flags & CAM_PERIPH_LOCKED) != 0) {
437 periph->flags |= CAM_PERIPH_LOCK_WANTED;
438 if ((error = mtx_sleep(periph, periph->sim->mtx, priority,
439 "caplck", 0)) != 0) {
440 cam_periph_release_locked(periph);
443 if (periph->flags & CAM_PERIPH_INVALID) {
444 cam_periph_release_locked(periph);
449 periph->flags |= CAM_PERIPH_LOCKED;
454 cam_periph_unhold(struct cam_periph *periph)
457 mtx_assert(periph->sim->mtx, MA_OWNED);
459 periph->flags &= ~CAM_PERIPH_LOCKED;
460 if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) {
461 periph->flags &= ~CAM_PERIPH_LOCK_WANTED;
465 cam_periph_release_locked(periph);
469 * Look for the next unit number that is not currently in use for this
470 * peripheral type starting at "newunit". Also exclude unit numbers that
471 * are reserved by for future "hardwiring" unless we already know that this
472 * is a potential wired device. Only assume that the device is "wired" the
473 * first time through the loop since after that we'll be looking at unit
474 * numbers that did not match a wiring entry.
477 camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired,
478 path_id_t pathid, target_id_t target, lun_id_t lun)
480 struct cam_periph *periph;
482 int i, val, dunit, r;
483 const char *dname, *strval;
485 periph_name = p_drv->driver_name;
488 for (periph = TAILQ_FIRST(&p_drv->units);
489 periph != NULL && periph->unit_number != newunit;
490 periph = TAILQ_NEXT(periph, unit_links))
493 if (periph != NULL && periph->unit_number == newunit) {
495 xpt_print(periph->path, "Duplicate Wired "
497 xpt_print(periph->path, "Second device (%s "
498 "device at scbus%d target %d lun %d) will "
499 "not be wired\n", periph_name, pathid,
509 * Don't match entries like "da 4" as a wired down
510 * device, but do match entries like "da 4 target 5"
511 * or even "da 4 scbus 1".
516 r = resource_find_dev(&i, dname, &dunit, NULL, NULL);
519 /* if no "target" and no specific scbus, skip */
520 if (resource_int_value(dname, dunit, "target", &val) &&
521 (resource_string_value(dname, dunit, "at",&strval)||
522 strcmp(strval, "scbus") == 0))
524 if (newunit == dunit)
534 camperiphunit(struct periph_driver *p_drv, path_id_t pathid,
535 target_id_t target, lun_id_t lun)
538 int wired, i, val, dunit;
539 const char *dname, *strval;
540 char pathbuf[32], *periph_name;
542 periph_name = p_drv->driver_name;
543 snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid);
547 for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0;
549 if (resource_string_value(dname, dunit, "at", &strval) == 0) {
550 if (strcmp(strval, pathbuf) != 0)
554 if (resource_int_value(dname, dunit, "target", &val) == 0) {
559 if (resource_int_value(dname, dunit, "lun", &val) == 0) {
571 * Either start from 0 looking for the next unit or from
572 * the unit number given in the resource config. This way,
573 * if we have wildcard matches, we don't return the same
576 unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun);
582 cam_periph_invalidate(struct cam_periph *periph)
585 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n"));
587 * We only call this routine the first time a peripheral is
590 if (((periph->flags & CAM_PERIPH_INVALID) == 0)
591 && (periph->periph_oninval != NULL))
592 periph->periph_oninval(periph);
594 periph->flags |= CAM_PERIPH_INVALID;
595 periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND;
598 if (periph->refcount == 0)
599 camperiphfree(periph);
604 camperiphfree(struct cam_periph *periph)
606 struct periph_driver **p_drv;
608 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
609 if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0)
612 if (*p_drv == NULL) {
613 printf("camperiphfree: attempt to free non-existant periph\n");
618 * The peripheral destructor semantics dictate calling with only the
619 * SIM mutex held. Since it might sleep, it should not be called
620 * with the topology lock held.
625 * We need to call the peripheral destructor prior to removing the
626 * peripheral from the list. Otherwise, we risk running into a
627 * scenario where the peripheral unit number may get reused
628 * (because it has been removed from the list), but some resources
629 * used by the peripheral are still hanging around. In particular,
630 * the devfs nodes used by some peripherals like the pass(4) driver
631 * aren't fully cleaned up until the destructor is run. If the
632 * unit number is reused before the devfs instance is fully gone,
635 if (periph->periph_dtor != NULL)
636 periph->periph_dtor(periph);
639 * The peripheral list is protected by the topology lock.
643 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
644 (*p_drv)->generation++;
646 xpt_remove_periph(periph, /*topology_lock_held*/ 1);
649 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n"));
651 if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) {
655 switch (periph->deferred_ac) {
656 case AC_FOUND_DEVICE:
657 ccb.ccb_h.func_code = XPT_GDEV_TYPE;
658 xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
662 case AC_PATH_REGISTERED:
663 ccb.ccb_h.func_code = XPT_PATH_INQ;
664 xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
672 periph->deferred_callback(NULL, periph->deferred_ac,
675 xpt_free_path(periph->path);
676 free(periph, M_CAMPERIPH);
681 * Map user virtual pointers into kernel virtual address space, so we can
682 * access the memory. This won't work on physical pointers, for now it's
683 * up to the caller to check for that. (XXX KDM -- should we do that here
684 * instead?) This also only works for up to MAXPHYS memory. Since we use
685 * buffers to map stuff in and out, we're limited to the buffer size.
688 cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
691 int flags[CAM_PERIPH_MAXMAPS];
692 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
693 u_int32_t lengths[CAM_PERIPH_MAXMAPS];
694 u_int32_t dirs[CAM_PERIPH_MAXMAPS];
695 /* Some controllers may not be able to handle more data. */
696 size_t maxmap = DFLTPHYS;
698 switch(ccb->ccb_h.func_code) {
700 if (ccb->cdm.match_buf_len == 0) {
701 printf("cam_periph_mapmem: invalid match buffer "
705 if (ccb->cdm.pattern_buf_len > 0) {
706 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
707 lengths[0] = ccb->cdm.pattern_buf_len;
708 dirs[0] = CAM_DIR_OUT;
709 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
710 lengths[1] = ccb->cdm.match_buf_len;
711 dirs[1] = CAM_DIR_IN;
714 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
715 lengths[0] = ccb->cdm.match_buf_len;
716 dirs[0] = CAM_DIR_IN;
720 * This request will not go to the hardware, no reason
721 * to be so strict. vmapbuf() is able to map up to MAXPHYS.
726 case XPT_CONT_TARGET_IO:
727 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
730 data_ptrs[0] = &ccb->csio.data_ptr;
731 lengths[0] = ccb->csio.dxfer_len;
732 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
736 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
739 data_ptrs[0] = &ccb->ataio.data_ptr;
740 lengths[0] = ccb->ataio.dxfer_len;
741 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
745 data_ptrs[0] = &ccb->smpio.smp_request;
746 lengths[0] = ccb->smpio.smp_request_len;
747 dirs[0] = CAM_DIR_OUT;
748 data_ptrs[1] = &ccb->smpio.smp_response;
749 lengths[1] = ccb->smpio.smp_response_len;
750 dirs[1] = CAM_DIR_IN;
753 case XPT_DEV_ADVINFO:
754 if (ccb->cdai.bufsiz == 0)
757 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
758 lengths[0] = ccb->cdai.bufsiz;
759 dirs[0] = CAM_DIR_IN;
763 * This request will not go to the hardware, no reason
764 * to be so strict. vmapbuf() is able to map up to MAXPHYS.
770 break; /* NOTREACHED */
774 * Check the transfer length and permissions first, so we don't
775 * have to unmap any previously mapped buffers.
777 for (i = 0; i < numbufs; i++) {
782 * The userland data pointer passed in may not be page
783 * aligned. vmapbuf() truncates the address to a page
784 * boundary, so if the address isn't page aligned, we'll
785 * need enough space for the given transfer length, plus
786 * whatever extra space is necessary to make it to the page
790 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > maxmap){
791 printf("cam_periph_mapmem: attempt to map %lu bytes, "
792 "which is greater than %lu\n",
794 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)),
799 if (dirs[i] & CAM_DIR_OUT) {
800 flags[i] = BIO_WRITE;
803 if (dirs[i] & CAM_DIR_IN) {
809 /* this keeps the current process from getting swapped */
811 * XXX KDM should I use P_NOSWAP instead?
815 for (i = 0; i < numbufs; i++) {
819 mapinfo->bp[i] = getpbuf(NULL);
821 /* save the buffer's data address */
822 mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data;
824 /* put our pointer in the data slot */
825 mapinfo->bp[i]->b_data = *data_ptrs[i];
827 /* set the transfer length, we know it's < MAXPHYS */
828 mapinfo->bp[i]->b_bufsize = lengths[i];
830 /* set the direction */
831 mapinfo->bp[i]->b_iocmd = flags[i];
834 * Map the buffer into kernel memory.
836 * Note that useracc() alone is not a sufficient test.
837 * vmapbuf() can still fail due to a smaller file mapped
838 * into a larger area of VM, or if userland races against
839 * vmapbuf() after the useracc() check.
841 if (vmapbuf(mapinfo->bp[i]) < 0) {
842 for (j = 0; j < i; ++j) {
843 *data_ptrs[j] = mapinfo->bp[j]->b_saveaddr;
844 vunmapbuf(mapinfo->bp[j]);
845 relpbuf(mapinfo->bp[j], NULL);
847 relpbuf(mapinfo->bp[i], NULL);
852 /* set our pointer to the new mapped area */
853 *data_ptrs[i] = mapinfo->bp[i]->b_data;
855 mapinfo->num_bufs_used++;
859 * Now that we've gotten this far, change ownership to the kernel
860 * of the buffers so that we don't run afoul of returning to user
861 * space with locks (on the buffer) held.
863 for (i = 0; i < numbufs; i++) {
864 BUF_KERNPROC(mapinfo->bp[i]);
872 * Unmap memory segments mapped into kernel virtual address space by
873 * cam_periph_mapmem().
876 cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
879 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
881 if (mapinfo->num_bufs_used <= 0) {
882 /* allow ourselves to be swapped once again */
887 switch (ccb->ccb_h.func_code) {
889 numbufs = min(mapinfo->num_bufs_used, 2);
892 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
894 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
895 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
899 case XPT_CONT_TARGET_IO:
900 data_ptrs[0] = &ccb->csio.data_ptr;
901 numbufs = min(mapinfo->num_bufs_used, 1);
904 data_ptrs[0] = &ccb->ataio.data_ptr;
905 numbufs = min(mapinfo->num_bufs_used, 1);
908 numbufs = min(mapinfo->num_bufs_used, 2);
909 data_ptrs[0] = &ccb->smpio.smp_request;
910 data_ptrs[1] = &ccb->smpio.smp_response;
912 case XPT_DEV_ADVINFO:
913 numbufs = min(mapinfo->num_bufs_used, 1);
914 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
917 /* allow ourselves to be swapped once again */
920 break; /* NOTREACHED */
923 for (i = 0; i < numbufs; i++) {
924 /* Set the user's pointer back to the original value */
925 *data_ptrs[i] = mapinfo->bp[i]->b_saveaddr;
927 /* unmap the buffer */
928 vunmapbuf(mapinfo->bp[i]);
930 /* release the buffer */
931 relpbuf(mapinfo->bp[i], NULL);
934 /* allow ourselves to be swapped once again */
939 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
941 struct ccb_hdr *ccb_h;
943 mtx_assert(periph->sim->mtx, MA_OWNED);
944 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering cdgetccb\n"));
946 while (SLIST_FIRST(&periph->ccb_list) == NULL) {
947 if (periph->immediate_priority > priority)
948 periph->immediate_priority = priority;
949 xpt_schedule(periph, priority);
950 if ((SLIST_FIRST(&periph->ccb_list) != NULL)
951 && (SLIST_FIRST(&periph->ccb_list)->pinfo.priority == priority))
953 mtx_assert(periph->sim->mtx, MA_OWNED);
954 mtx_sleep(&periph->ccb_list, periph->sim->mtx, PRIBIO, "cgticb",
958 ccb_h = SLIST_FIRST(&periph->ccb_list);
959 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
960 return ((union ccb *)ccb_h);
964 cam_periph_ccbwait(union ccb *ccb)
968 sim = xpt_path_sim(ccb->ccb_h.path);
969 if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX)
970 || ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG))
971 mtx_sleep(&ccb->ccb_h.cbfcnp, sim->mtx, PRIBIO, "cbwait", 0);
975 cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr,
976 int (*error_routine)(union ccb *ccb,
978 u_int32_t sense_flags))
988 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
989 xpt_setup_ccb(&ccb->ccb_h,
991 CAM_PRIORITY_NORMAL);
992 ccb->ccb_h.func_code = XPT_GDEVLIST;
995 * Basically, the point of this is that we go through
996 * getting the list of devices, until we find a passthrough
997 * device. In the current version of the CAM code, the
998 * only way to determine what type of device we're dealing
999 * with is by its name.
1001 while (found == 0) {
1002 ccb->cgdl.index = 0;
1003 ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS;
1004 while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) {
1006 /* we want the next device in the list */
1008 if (strncmp(ccb->cgdl.periph_name,
1014 if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) &&
1016 ccb->cgdl.periph_name[0] = '\0';
1017 ccb->cgdl.unit_number = 0;
1022 /* copy the result back out */
1023 bcopy(ccb, addr, sizeof(union ccb));
1025 /* and release the ccb */
1026 xpt_release_ccb(ccb);
1037 cam_periph_runccb(union ccb *ccb,
1038 int (*error_routine)(union ccb *ccb,
1040 u_int32_t sense_flags),
1041 cam_flags camflags, u_int32_t sense_flags,
1044 struct cam_sim *sim;
1048 sim = xpt_path_sim(ccb->ccb_h.path);
1049 mtx_assert(sim->mtx, MA_OWNED);
1052 * If the user has supplied a stats structure, and if we understand
1053 * this particular type of ccb, record the transaction start.
1055 if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO ||
1056 ccb->ccb_h.func_code == XPT_ATA_IO))
1057 devstat_start_transaction(ds, NULL);
1062 cam_periph_ccbwait(ccb);
1063 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
1065 else if (error_routine != NULL)
1066 error = (*error_routine)(ccb, camflags, sense_flags);
1070 } while (error == ERESTART);
1072 if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
1073 cam_release_devq(ccb->ccb_h.path,
1074 /* relsim_flags */0,
1077 /* getcount_only */ FALSE);
1078 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1082 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1083 devstat_end_transaction(ds,
1084 ccb->csio.dxfer_len,
1085 ccb->csio.tag_action & 0x3,
1086 ((ccb->ccb_h.flags & CAM_DIR_MASK) ==
1087 CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
1088 (ccb->ccb_h.flags & CAM_DIR_OUT) ?
1090 DEVSTAT_READ, NULL, NULL);
1091 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1092 devstat_end_transaction(ds,
1093 ccb->ataio.dxfer_len,
1094 ccb->ataio.tag_action & 0x3,
1095 ((ccb->ccb_h.flags & CAM_DIR_MASK) ==
1096 CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
1097 (ccb->ccb_h.flags & CAM_DIR_OUT) ?
1099 DEVSTAT_READ, NULL, NULL);
1107 cam_freeze_devq(struct cam_path *path)
1110 cam_freeze_devq_arg(path, 0, 0);
1114 cam_freeze_devq_arg(struct cam_path *path, uint32_t flags, uint32_t arg)
1116 struct ccb_relsim crs;
1118 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NONE);
1119 crs.ccb_h.func_code = XPT_FREEZE_QUEUE;
1120 crs.release_flags = flags;
1122 crs.release_timeout = arg;
1123 xpt_action((union ccb *)&crs);
1127 cam_release_devq(struct cam_path *path, u_int32_t relsim_flags,
1128 u_int32_t openings, u_int32_t arg,
1131 struct ccb_relsim crs;
1133 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
1134 crs.ccb_h.func_code = XPT_REL_SIMQ;
1135 crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0;
1136 crs.release_flags = relsim_flags;
1137 crs.openings = openings;
1138 crs.release_timeout = arg;
1139 xpt_action((union ccb *)&crs);
1140 return (crs.qfrozen_cnt);
1143 #define saved_ccb_ptr ppriv_ptr0
1145 camperiphdone(struct cam_periph *periph, union ccb *done_ccb)
1147 union ccb *saved_ccb;
1149 struct scsi_start_stop_unit *scsi_cmd;
1151 scsi_cmd = (struct scsi_start_stop_unit *)
1152 &done_ccb->csio.cdb_io.cdb_bytes;
1153 status = done_ccb->ccb_h.status;
1155 if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
1156 if ((status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR &&
1157 (status & CAM_AUTOSNS_VALID)) {
1158 struct scsi_sense_data *sense;
1159 int error_code, sense_key, asc, ascq, sense_len;
1161 sense = &done_ccb->csio.sense_data;
1162 sense_len = done_ccb->csio.sense_len -
1163 done_ccb->csio.sense_resid;
1164 scsi_extract_sense_len(sense, sense_len, &error_code,
1165 &sense_key, &asc, &ascq, /*show_errors*/ 1);
1167 * If the error is "invalid field in CDB",
1168 * and the load/eject flag is set, turn the
1169 * flag off and try again. This is just in
1170 * case the drive in question barfs on the
1171 * load eject flag. The CAM code should set
1172 * the load/eject flag by default for
1175 if ((scsi_cmd->opcode == START_STOP_UNIT) &&
1176 ((scsi_cmd->how & SSS_LOEJ) != 0) &&
1177 (asc == 0x24) && (ascq == 0x00)) {
1178 scsi_cmd->how &= ~SSS_LOEJ;
1179 if (status & CAM_DEV_QFRZN) {
1180 cam_release_devq(done_ccb->ccb_h.path,
1182 done_ccb->ccb_h.status &=
1185 xpt_action(done_ccb);
1189 if (cam_periph_error(done_ccb,
1190 0, SF_RETRY_UA | SF_NO_PRINT, NULL) == ERESTART)
1192 if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) {
1193 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
1194 done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1198 * If we have successfully taken a device from the not
1199 * ready to ready state, re-scan the device and re-get
1200 * the inquiry information. Many devices (mostly disks)
1201 * don't properly report their inquiry information unless
1204 if (scsi_cmd->opcode == START_STOP_UNIT)
1205 xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL);
1209 * Perform the final retry with the original CCB so that final
1210 * error processing is performed by the owner of the CCB.
1212 saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr;
1213 bcopy(saved_ccb, done_ccb, sizeof(*done_ccb));
1214 xpt_free_ccb(saved_ccb);
1215 if (done_ccb->ccb_h.cbfcnp != camperiphdone)
1216 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG;
1217 xpt_action(done_ccb);
1220 /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */
1221 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
1225 * Generic Async Event handler. Peripheral drivers usually
1226 * filter out the events that require personal attention,
1227 * and leave the rest to this function.
1230 cam_periph_async(struct cam_periph *periph, u_int32_t code,
1231 struct cam_path *path, void *arg)
1234 case AC_LOST_DEVICE:
1235 cam_periph_invalidate(periph);
1243 cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle)
1245 struct ccb_getdevstats cgds;
1247 xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1248 cgds.ccb_h.func_code = XPT_GDEV_STATS;
1249 xpt_action((union ccb *)&cgds);
1250 cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle);
1254 cam_periph_freeze_after_event(struct cam_periph *periph,
1255 struct timeval* event_time, u_int duration_ms)
1257 struct timeval delta;
1258 struct timeval duration_tv;
1261 timevalsub(&delta, event_time);
1262 duration_tv.tv_sec = duration_ms / 1000;
1263 duration_tv.tv_usec = (duration_ms % 1000) * 1000;
1264 if (timevalcmp(&delta, &duration_tv, <)) {
1265 timevalsub(&duration_tv, &delta);
1267 duration_ms = duration_tv.tv_sec * 1000;
1268 duration_ms += duration_tv.tv_usec / 1000;
1269 cam_freeze_devq(periph->path);
1270 cam_release_devq(periph->path,
1271 RELSIM_RELEASE_AFTER_TIMEOUT,
1273 /*timeout*/duration_ms,
1274 /*getcount_only*/0);
1280 camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb,
1281 cam_flags camflags, u_int32_t sense_flags,
1282 int *openings, u_int32_t *relsim_flags,
1283 u_int32_t *timeout, int *print, const char **action_string)
1287 switch (ccb->csio.scsi_status) {
1288 case SCSI_STATUS_OK:
1289 case SCSI_STATUS_COND_MET:
1290 case SCSI_STATUS_INTERMED:
1291 case SCSI_STATUS_INTERMED_COND_MET:
1294 case SCSI_STATUS_CMD_TERMINATED:
1295 case SCSI_STATUS_CHECK_COND:
1296 error = camperiphscsisenseerror(ccb, orig_ccb,
1305 case SCSI_STATUS_QUEUE_FULL:
1308 struct ccb_getdevstats cgds;
1311 * First off, find out what the current
1312 * transaction counts are.
1314 xpt_setup_ccb(&cgds.ccb_h,
1316 CAM_PRIORITY_NORMAL);
1317 cgds.ccb_h.func_code = XPT_GDEV_STATS;
1318 xpt_action((union ccb *)&cgds);
1321 * If we were the only transaction active, treat
1322 * the QUEUE FULL as if it were a BUSY condition.
1324 if (cgds.dev_active != 0) {
1328 * Reduce the number of openings to
1329 * be 1 less than the amount it took
1330 * to get a queue full bounded by the
1331 * minimum allowed tag count for this
1334 total_openings = cgds.dev_active + cgds.dev_openings;
1335 *openings = cgds.dev_active;
1336 if (*openings < cgds.mintags)
1337 *openings = cgds.mintags;
1338 if (*openings < total_openings)
1339 *relsim_flags = RELSIM_ADJUST_OPENINGS;
1342 * Some devices report queue full for
1343 * temporary resource shortages. For
1344 * this reason, we allow a minimum
1345 * tag count to be entered via a
1346 * quirk entry to prevent the queue
1347 * count on these devices from falling
1348 * to a pessimisticly low value. We
1349 * still wait for the next successful
1350 * completion, however, before queueing
1351 * more transactions to the device.
1353 *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT;
1362 case SCSI_STATUS_BUSY:
1364 * Restart the queue after either another
1365 * command completes or a 1 second timeout.
1367 if (ccb->ccb_h.retry_count > 0) {
1368 ccb->ccb_h.retry_count--;
1370 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT
1371 | RELSIM_RELEASE_AFTER_CMDCMPLT;
1377 case SCSI_STATUS_RESERV_CONFLICT:
1386 camperiphscsisenseerror(union ccb *ccb, union ccb **orig,
1387 cam_flags camflags, u_int32_t sense_flags,
1388 int *openings, u_int32_t *relsim_flags,
1389 u_int32_t *timeout, int *print, const char **action_string)
1391 struct cam_periph *periph;
1392 union ccb *orig_ccb = ccb;
1393 int error, recoveryccb;
1395 periph = xpt_path_periph(ccb->ccb_h.path);
1396 recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone);
1397 if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) {
1399 * If error recovery is already in progress, don't attempt
1400 * to process this error, but requeue it unconditionally
1401 * and attempt to process it once error recovery has
1402 * completed. This failed command is probably related to
1403 * the error that caused the currently active error recovery
1404 * action so our current recovery efforts should also
1405 * address this command. Be aware that the error recovery
1406 * code assumes that only one recovery action is in progress
1407 * on a particular peripheral instance at any given time
1408 * (e.g. only one saved CCB for error recovery) so it is
1409 * imperitive that we don't violate this assumption.
1414 scsi_sense_action err_action;
1415 struct ccb_getdev cgd;
1418 * Grab the inquiry data for this device.
1420 xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL);
1421 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
1422 xpt_action((union ccb *)&cgd);
1424 if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)
1425 err_action = scsi_error_action(&ccb->csio,
1429 err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO;
1430 error = err_action & SS_ERRMASK;
1433 * Do not autostart sequential access devices
1434 * to avoid unexpected tape loading.
1436 if ((err_action & SS_MASK) == SS_START &&
1437 SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) {
1438 *action_string = "Will not autostart a "
1439 "sequential access device";
1440 goto sense_error_done;
1444 * Avoid recovery recursion if recovery action is the same.
1446 if ((err_action & SS_MASK) >= SS_START && recoveryccb) {
1447 if (((err_action & SS_MASK) == SS_START &&
1448 ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) ||
1449 ((err_action & SS_MASK) == SS_TUR &&
1450 (ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) {
1451 err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO;
1452 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1458 * If the recovery action will consume a retry,
1459 * make sure we actually have retries available.
1461 if ((err_action & SSQ_DECREMENT_COUNT) != 0) {
1462 if (ccb->ccb_h.retry_count > 0 &&
1463 (periph->flags & CAM_PERIPH_INVALID) == 0)
1464 ccb->ccb_h.retry_count--;
1466 *action_string = "Retries exhausted";
1467 goto sense_error_done;
1471 if ((err_action & SS_MASK) >= SS_START) {
1473 * Do common portions of commands that
1474 * use recovery CCBs.
1476 orig_ccb = xpt_alloc_ccb_nowait();
1477 if (orig_ccb == NULL) {
1478 *action_string = "Can't allocate recovery CCB";
1479 goto sense_error_done;
1482 * Clear freeze flag for original request here, as
1483 * this freeze will be dropped as part of ERESTART.
1485 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1486 bcopy(ccb, orig_ccb, sizeof(*orig_ccb));
1489 switch (err_action & SS_MASK) {
1491 *action_string = "No recovery action needed";
1495 *action_string = "Retrying command (per sense data)";
1499 *action_string = "Unretryable error";
1506 * Send a start unit command to the device, and
1507 * then retry the command.
1509 *action_string = "Attempting to start unit";
1510 periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
1513 * Check for removable media and set
1514 * load/eject flag appropriately.
1516 if (SID_IS_REMOVABLE(&cgd.inq_data))
1521 scsi_start_stop(&ccb->csio,
1535 * Send a Test Unit Ready to the device.
1536 * If the 'many' flag is set, we send 120
1537 * test unit ready commands, one every half
1538 * second. Otherwise, we just send one TUR.
1539 * We only want to do this if the retry
1540 * count has not been exhausted.
1544 if ((err_action & SSQ_MANY) != 0) {
1545 *action_string = "Polling device for readiness";
1548 *action_string = "Testing device for readiness";
1551 periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
1552 scsi_test_unit_ready(&ccb->csio,
1560 * Accomplish our 500ms delay by deferring
1561 * the release of our device queue appropriately.
1563 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1568 panic("Unhandled error action %x", err_action);
1571 if ((err_action & SS_MASK) >= SS_START) {
1573 * Drop the priority, so that the recovery
1574 * CCB is the first to execute. Freeze the queue
1575 * after this command is sent so that we can
1576 * restore the old csio and have it queued in
1577 * the proper order before we release normal
1578 * transactions to the device.
1580 ccb->ccb_h.pinfo.priority--;
1581 ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
1582 ccb->ccb_h.saved_ccb_ptr = orig_ccb;
1588 *print = ((err_action & SSQ_PRINT_SENSE) != 0);
1594 * Generic error handler. Peripheral drivers usually filter
1595 * out the errors that they handle in a unique mannor, then
1596 * call this function.
1599 cam_periph_error(union ccb *ccb, cam_flags camflags,
1600 u_int32_t sense_flags, union ccb *save_ccb)
1602 union ccb *orig_ccb;
1603 struct cam_periph *periph;
1604 const char *action_string;
1606 int frozen, error, openings, print, lost_device;
1607 u_int32_t relsim_flags, timeout;
1610 periph = xpt_path_periph(ccb->ccb_h.path);
1611 action_string = NULL;
1612 status = ccb->ccb_h.status;
1613 frozen = (status & CAM_DEV_QFRZN) != 0;
1614 status &= CAM_STATUS_MASK;
1615 openings = relsim_flags = timeout = lost_device = 0;
1623 case CAM_SCSI_STATUS_ERROR:
1624 error = camperiphscsistatuserror(ccb, &orig_ccb,
1625 camflags, sense_flags, &openings, &relsim_flags,
1626 &timeout, &print, &action_string);
1628 case CAM_AUTOSENSE_FAIL:
1629 error = EIO; /* we have to kill the command */
1633 case CAM_MSG_REJECT_REC:
1634 /* XXX Don't know that these are correct */
1637 case CAM_SEL_TIMEOUT:
1638 if ((camflags & CAM_RETRY_SELTO) != 0) {
1639 if (ccb->ccb_h.retry_count > 0 &&
1640 (periph->flags & CAM_PERIPH_INVALID) == 0) {
1641 ccb->ccb_h.retry_count--;
1645 * Wait a bit to give the device
1646 * time to recover before we try again.
1648 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1649 timeout = periph_selto_delay;
1652 action_string = "Retries exhausted";
1655 case CAM_DEV_NOT_THERE:
1660 case CAM_REQ_INVALID:
1661 case CAM_PATH_INVALID:
1663 case CAM_PROVIDE_FAIL:
1664 case CAM_REQ_TOO_BIG:
1665 case CAM_LUN_INVALID:
1666 case CAM_TID_INVALID:
1669 case CAM_SCSI_BUS_RESET:
1672 * Commands that repeatedly timeout and cause these
1673 * kinds of error recovery actions, should return
1674 * CAM_CMD_TIMEOUT, which allows us to safely assume
1675 * that this command was an innocent bystander to
1676 * these events and should be unconditionally
1679 case CAM_REQUEUE_REQ:
1680 /* Unconditional requeue if device is still there */
1681 if (periph->flags & CAM_PERIPH_INVALID) {
1682 action_string = "Periph was invalidated";
1684 } else if (sense_flags & SF_NO_RETRY) {
1686 action_string = "Retry was blocked";
1692 case CAM_RESRC_UNAVAIL:
1693 /* Wait a bit for the resource shortage to abate. */
1694 timeout = periph_noresrc_delay;
1698 /* Wait a bit for the busy condition to abate. */
1699 timeout = periph_busy_delay;
1701 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1703 case CAM_ATA_STATUS_ERROR:
1704 case CAM_REQ_CMP_ERR:
1705 case CAM_CMD_TIMEOUT:
1706 case CAM_UNEXP_BUSFREE:
1707 case CAM_UNCOR_PARITY:
1708 case CAM_DATA_RUN_ERR:
1710 if (periph->flags & CAM_PERIPH_INVALID) {
1712 action_string = "Periph was invalidated";
1713 } else if (ccb->ccb_h.retry_count == 0) {
1715 action_string = "Retries exhausted";
1716 } else if (sense_flags & SF_NO_RETRY) {
1718 action_string = "Retry was blocked";
1720 ccb->ccb_h.retry_count--;
1726 if ((sense_flags & SF_PRINT_ALWAYS) ||
1727 CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO))
1729 else if (sense_flags & SF_NO_PRINT)
1732 cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL);
1733 if (error != 0 && print) {
1734 if (error != ERESTART) {
1735 if (action_string == NULL)
1736 action_string = "Unretryable error";
1737 xpt_print(ccb->ccb_h.path, "Error %d, %s\n",
1738 error, action_string);
1739 } else if (action_string != NULL)
1740 xpt_print(ccb->ccb_h.path, "%s\n", action_string);
1742 xpt_print(ccb->ccb_h.path, "Retrying command\n");
1746 struct cam_path *newpath;
1750 * For a selection timeout, we consider all of the LUNs on
1751 * the target to be gone. If the status is CAM_DEV_NOT_THERE,
1752 * then we only get rid of the device(s) specified by the
1753 * path in the original CCB.
1755 if (status == CAM_DEV_NOT_THERE)
1756 lun_id = xpt_path_lun_id(ccb->ccb_h.path);
1758 lun_id = CAM_LUN_WILDCARD;
1760 /* Should we do more if we can't create the path?? */
1761 if (xpt_create_path(&newpath, periph,
1762 xpt_path_path_id(ccb->ccb_h.path),
1763 xpt_path_target_id(ccb->ccb_h.path),
1764 lun_id) == CAM_REQ_CMP) {
1767 * Let peripheral drivers know that this
1768 * device has gone away.
1770 xpt_async(AC_LOST_DEVICE, newpath, NULL);
1771 xpt_free_path(newpath);
1775 /* Attempt a retry */
1776 if (error == ERESTART || error == 0) {
1778 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1779 if (error == ERESTART)
1782 cam_release_devq(ccb->ccb_h.path,
1786 /*getcount_only*/0);