2 * Common functions for CAM "type" (peripheral) drivers.
4 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
6 * Copyright (c) 1997, 1998 Justin T. Gibbs.
7 * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification, immediately at the beginning of the file.
16 * 2. The name of the author may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD$");
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/types.h>
38 #include <sys/malloc.h>
39 #include <sys/kernel.h>
43 #include <sys/mutex.h>
46 #include <sys/devicestat.h>
49 #include <sys/sysctl.h>
51 #include <vm/vm_extern.h>
54 #include <cam/cam_ccb.h>
55 #include <cam/cam_queue.h>
56 #include <cam/cam_xpt_periph.h>
57 #include <cam/cam_periph.h>
58 #include <cam/cam_debug.h>
59 #include <cam/cam_sim.h>
61 #include <cam/scsi/scsi_all.h>
62 #include <cam/scsi/scsi_message.h>
63 #include <cam/scsi/scsi_pass.h>
65 static u_int camperiphnextunit(struct periph_driver *p_drv,
66 u_int newunit, int wired,
67 path_id_t pathid, target_id_t target,
69 static u_int camperiphunit(struct periph_driver *p_drv,
70 path_id_t pathid, target_id_t target,
72 static void camperiphdone(struct cam_periph *periph,
74 static void camperiphfree(struct cam_periph *periph);
75 static int camperiphscsistatuserror(union ccb *ccb,
78 u_int32_t sense_flags,
80 u_int32_t *relsim_flags,
83 const char **action_string);
84 static int camperiphscsisenseerror(union ccb *ccb,
87 u_int32_t sense_flags,
89 u_int32_t *relsim_flags,
92 const char **action_string);
93 static void cam_periph_devctl_notify(union ccb *ccb);
95 static int nperiph_drivers;
96 static int initialized = 0;
97 struct periph_driver **periph_drivers;
99 static MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers");
101 static int periph_selto_delay = 1000;
102 TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay);
103 static int periph_noresrc_delay = 500;
104 TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay);
105 static int periph_busy_delay = 500;
106 TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay);
108 static u_int periph_mapmem_thresh = 65536;
109 SYSCTL_UINT(_kern_cam, OID_AUTO, mapmem_thresh, CTLFLAG_RWTUN,
110 &periph_mapmem_thresh, 0, "Threshold for user-space buffer mapping");
113 periphdriver_register(void *data)
115 struct periph_driver *drv = (struct periph_driver *)data;
116 struct periph_driver **newdrivers, **old;
120 ndrivers = nperiph_drivers + 2;
121 newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH,
124 if (ndrivers != nperiph_drivers + 2) {
126 * Lost race against itself; go around.
129 free(newdrivers, M_CAMPERIPH);
133 bcopy(periph_drivers, newdrivers,
134 sizeof(*newdrivers) * nperiph_drivers);
135 newdrivers[nperiph_drivers] = drv;
136 newdrivers[nperiph_drivers + 1] = NULL;
137 old = periph_drivers;
138 periph_drivers = newdrivers;
142 free(old, M_CAMPERIPH);
143 /* If driver marked as early or it is late now, initialize it. */
144 if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) ||
150 periphdriver_unregister(void *data)
152 struct periph_driver *drv = (struct periph_driver *)data;
155 /* If driver marked as early or it is late now, deinitialize it. */
156 if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) ||
158 if (drv->deinit == NULL) {
159 printf("CAM periph driver '%s' doesn't have deinit.\n",
163 error = drv->deinit();
169 for (n = 0; n < nperiph_drivers && periph_drivers[n] != drv; n++)
171 KASSERT(n < nperiph_drivers,
172 ("Periph driver '%s' was not registered", drv->driver_name));
173 for (; n + 1 < nperiph_drivers; n++)
174 periph_drivers[n] = periph_drivers[n + 1];
175 periph_drivers[n + 1] = NULL;
182 periphdriver_init(int level)
186 initialized = max(initialized, level);
187 for (i = 0; periph_drivers[i] != NULL; i++) {
188 early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2;
189 if (early == initialized)
190 (*periph_drivers[i]->init)();
195 cam_periph_alloc(periph_ctor_t *periph_ctor,
196 periph_oninv_t *periph_oninvalidate,
197 periph_dtor_t *periph_dtor, periph_start_t *periph_start,
198 char *name, cam_periph_type type, struct cam_path *path,
199 ac_callback_t *ac_callback, ac_code code, void *arg)
201 struct periph_driver **p_drv;
203 struct cam_periph *periph;
204 struct cam_periph *cur_periph;
206 target_id_t target_id;
213 * Handle Hot-Plug scenarios. If there is already a peripheral
214 * of our type assigned to this path, we are likely waiting for
215 * final close on an old, invalidated, peripheral. If this is
216 * the case, queue up a deferred call to the peripheral's async
217 * handler. If it looks like a mistaken re-allocation, complain.
219 if ((periph = cam_periph_find(path, name)) != NULL) {
221 if ((periph->flags & CAM_PERIPH_INVALID) != 0
222 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) {
223 periph->flags |= CAM_PERIPH_NEW_DEV_FOUND;
224 periph->deferred_callback = ac_callback;
225 periph->deferred_ac = code;
226 return (CAM_REQ_INPROG);
228 printf("cam_periph_alloc: attempt to re-allocate "
229 "valid device %s%d rejected flags %#x "
230 "refcount %d\n", periph->periph_name,
231 periph->unit_number, periph->flags,
234 return (CAM_REQ_INVALID);
237 periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH,
241 return (CAM_RESRC_UNAVAIL);
246 sim = xpt_path_sim(path);
247 path_id = xpt_path_path_id(path);
248 target_id = xpt_path_target_id(path);
249 lun_id = xpt_path_lun_id(path);
250 periph->periph_start = periph_start;
251 periph->periph_dtor = periph_dtor;
252 periph->periph_oninval = periph_oninvalidate;
254 periph->periph_name = name;
255 periph->scheduled_priority = CAM_PRIORITY_NONE;
256 periph->immediate_priority = CAM_PRIORITY_NONE;
257 periph->refcount = 1; /* Dropped by invalidation. */
259 SLIST_INIT(&periph->ccb_list);
260 status = xpt_create_path(&path, periph, path_id, target_id, lun_id);
261 if (status != CAM_REQ_CMP)
266 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
267 if (strcmp((*p_drv)->driver_name, name) == 0)
270 if (*p_drv == NULL) {
271 printf("cam_periph_alloc: invalid periph name '%s'\n", name);
273 xpt_free_path(periph->path);
274 free(periph, M_CAMPERIPH);
275 return (CAM_REQ_INVALID);
277 periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id);
278 cur_periph = TAILQ_FIRST(&(*p_drv)->units);
279 while (cur_periph != NULL
280 && cur_periph->unit_number < periph->unit_number)
281 cur_periph = TAILQ_NEXT(cur_periph, unit_links);
282 if (cur_periph != NULL) {
283 KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list"));
284 TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links);
286 TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links);
287 (*p_drv)->generation++;
293 status = xpt_add_periph(periph);
294 if (status != CAM_REQ_CMP)
298 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n"));
300 status = periph_ctor(periph, arg);
302 if (status == CAM_REQ_CMP)
306 switch (init_level) {
308 /* Initialized successfully */
311 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n"));
312 xpt_remove_periph(periph);
316 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
318 xpt_free_path(periph->path);
321 free(periph, M_CAMPERIPH);
324 /* No cleanup to perform. */
327 panic("%s: Unknown init level", __func__);
333 * Find a peripheral structure with the specified path, target, lun,
334 * and (optionally) type. If the name is NULL, this function will return
335 * the first peripheral driver that matches the specified path.
338 cam_periph_find(struct cam_path *path, char *name)
340 struct periph_driver **p_drv;
341 struct cam_periph *periph;
344 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
346 if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0))
349 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
350 if (xpt_path_comp(periph->path, path) == 0) {
352 cam_periph_assert(periph, MA_OWNED);
366 * Find peripheral driver instances attached to the specified path.
369 cam_periph_list(struct cam_path *path, struct sbuf *sb)
371 struct sbuf local_sb;
372 struct periph_driver **p_drv;
373 struct cam_periph *periph;
379 sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN);
382 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
384 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
385 if (xpt_path_comp(periph->path, path) != 0)
388 if (sbuf_len(&local_sb) != 0)
389 sbuf_cat(&local_sb, ",");
391 sbuf_printf(&local_sb, "%s%d", periph->periph_name,
392 periph->unit_number);
394 if (sbuf_error(&local_sb) == ENOMEM) {
397 sbuf_delete(&local_sb);
404 sbuf_finish(&local_sb);
405 if (sbuf_len(sb) != 0)
407 sbuf_cat(sb, sbuf_data(&local_sb));
408 sbuf_delete(&local_sb);
413 cam_periph_acquire(struct cam_periph *periph)
422 if ((periph->flags & CAM_PERIPH_INVALID) == 0) {
432 cam_periph_doacquire(struct cam_periph *periph)
436 KASSERT(periph->refcount >= 1,
437 ("cam_periph_doacquire() with refcount == %d", periph->refcount));
443 cam_periph_release_locked_buses(struct cam_periph *periph)
446 cam_periph_assert(periph, MA_OWNED);
447 KASSERT(periph->refcount >= 1, ("periph->refcount >= 1"));
448 if (--periph->refcount == 0)
449 camperiphfree(periph);
453 cam_periph_release_locked(struct cam_periph *periph)
460 cam_periph_release_locked_buses(periph);
465 cam_periph_release(struct cam_periph *periph)
472 cam_periph_assert(periph, MA_NOTOWNED);
473 mtx = cam_periph_mtx(periph);
475 cam_periph_release_locked(periph);
480 * hold/unhold act as mutual exclusion for sections of the code that
481 * need to sleep and want to make sure that other sections that
482 * will interfere are held off. This only protects exclusive sections
486 cam_periph_hold(struct cam_periph *periph, int priority)
491 * Increment the reference count on the peripheral
492 * while we wait for our lock attempt to succeed
493 * to ensure the peripheral doesn't disappear out
494 * from user us while we sleep.
497 if (cam_periph_acquire(periph) != 0)
500 cam_periph_assert(periph, MA_OWNED);
501 while ((periph->flags & CAM_PERIPH_LOCKED) != 0) {
502 periph->flags |= CAM_PERIPH_LOCK_WANTED;
503 if ((error = cam_periph_sleep(periph, periph, priority,
504 "caplck", 0)) != 0) {
505 cam_periph_release_locked(periph);
508 if (periph->flags & CAM_PERIPH_INVALID) {
509 cam_periph_release_locked(periph);
514 periph->flags |= CAM_PERIPH_LOCKED;
519 cam_periph_unhold(struct cam_periph *periph)
522 cam_periph_assert(periph, MA_OWNED);
524 periph->flags &= ~CAM_PERIPH_LOCKED;
525 if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) {
526 periph->flags &= ~CAM_PERIPH_LOCK_WANTED;
530 cam_periph_release_locked(periph);
534 * Look for the next unit number that is not currently in use for this
535 * peripheral type starting at "newunit". Also exclude unit numbers that
536 * are reserved by for future "hardwiring" unless we already know that this
537 * is a potential wired device. Only assume that the device is "wired" the
538 * first time through the loop since after that we'll be looking at unit
539 * numbers that did not match a wiring entry.
542 camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired,
543 path_id_t pathid, target_id_t target, lun_id_t lun)
545 struct cam_periph *periph;
547 int i, val, dunit, r;
548 const char *dname, *strval;
550 periph_name = p_drv->driver_name;
553 for (periph = TAILQ_FIRST(&p_drv->units);
554 periph != NULL && periph->unit_number != newunit;
555 periph = TAILQ_NEXT(periph, unit_links))
558 if (periph != NULL && periph->unit_number == newunit) {
560 xpt_print(periph->path, "Duplicate Wired "
562 xpt_print(periph->path, "Second device (%s "
563 "device at scbus%d target %d lun %d) will "
564 "not be wired\n", periph_name, pathid,
574 * Don't match entries like "da 4" as a wired down
575 * device, but do match entries like "da 4 target 5"
576 * or even "da 4 scbus 1".
581 r = resource_find_dev(&i, dname, &dunit, NULL, NULL);
584 /* if no "target" and no specific scbus, skip */
585 if (resource_int_value(dname, dunit, "target", &val) &&
586 (resource_string_value(dname, dunit, "at",&strval)||
587 strcmp(strval, "scbus") == 0))
589 if (newunit == dunit)
599 camperiphunit(struct periph_driver *p_drv, path_id_t pathid,
600 target_id_t target, lun_id_t lun)
603 int wired, i, val, dunit;
604 const char *dname, *strval;
605 char pathbuf[32], *periph_name;
607 periph_name = p_drv->driver_name;
608 snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid);
612 for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0;
614 if (resource_string_value(dname, dunit, "at", &strval) == 0) {
615 if (strcmp(strval, pathbuf) != 0)
619 if (resource_int_value(dname, dunit, "target", &val) == 0) {
624 if (resource_int_value(dname, dunit, "lun", &val) == 0) {
636 * Either start from 0 looking for the next unit or from
637 * the unit number given in the resource config. This way,
638 * if we have wildcard matches, we don't return the same
641 unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun);
647 cam_periph_invalidate(struct cam_periph *periph)
650 cam_periph_assert(periph, MA_OWNED);
652 * We only call this routine the first time a peripheral is
655 if ((periph->flags & CAM_PERIPH_INVALID) != 0)
658 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n"));
659 if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) {
663 sbuf_new(&sb, buffer, 160, SBUF_FIXEDLEN);
664 xpt_denounce_periph_sbuf(periph, &sb);
668 periph->flags |= CAM_PERIPH_INVALID;
669 periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND;
670 if (periph->periph_oninval != NULL)
671 periph->periph_oninval(periph);
672 cam_periph_release_locked(periph);
676 camperiphfree(struct cam_periph *periph)
678 struct periph_driver **p_drv;
679 struct periph_driver *drv;
681 cam_periph_assert(periph, MA_OWNED);
682 KASSERT(periph->periph_allocating == 0, ("%s%d: freed while allocating",
683 periph->periph_name, periph->unit_number));
684 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
685 if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0)
688 if (*p_drv == NULL) {
689 printf("camperiphfree: attempt to free non-existant periph\n");
693 * Cache a pointer to the periph_driver structure. If a
694 * periph_driver is added or removed from the array (see
695 * periphdriver_register()) while we drop the toplogy lock
696 * below, p_drv may change. This doesn't protect against this
697 * particular periph_driver going away. That will require full
698 * reference counting in the periph_driver infrastructure.
703 * We need to set this flag before dropping the topology lock, to
704 * let anyone who is traversing the list that this peripheral is
705 * about to be freed, and there will be no more reference count
708 periph->flags |= CAM_PERIPH_FREE;
711 * The peripheral destructor semantics dictate calling with only the
712 * SIM mutex held. Since it might sleep, it should not be called
713 * with the topology lock held.
718 * We need to call the peripheral destructor prior to removing the
719 * peripheral from the list. Otherwise, we risk running into a
720 * scenario where the peripheral unit number may get reused
721 * (because it has been removed from the list), but some resources
722 * used by the peripheral are still hanging around. In particular,
723 * the devfs nodes used by some peripherals like the pass(4) driver
724 * aren't fully cleaned up until the destructor is run. If the
725 * unit number is reused before the devfs instance is fully gone,
728 if (periph->periph_dtor != NULL)
729 periph->periph_dtor(periph);
732 * The peripheral list is protected by the topology lock.
736 TAILQ_REMOVE(&drv->units, periph, unit_links);
739 xpt_remove_periph(periph);
742 if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting)
743 xpt_print(periph->path, "Periph destroyed\n");
745 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n"));
747 if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) {
751 switch (periph->deferred_ac) {
752 case AC_FOUND_DEVICE:
753 ccb.ccb_h.func_code = XPT_GDEV_TYPE;
754 xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
758 case AC_PATH_REGISTERED:
759 xpt_path_inq(&ccb.cpi, periph->path);
766 periph->deferred_callback(NULL, periph->deferred_ac,
769 xpt_free_path(periph->path);
770 free(periph, M_CAMPERIPH);
775 * Map user virtual pointers into kernel virtual address space, so we can
776 * access the memory. This is now a generic function that centralizes most
777 * of the sanity checks on the data flags, if any.
778 * This also only works for up to MAXPHYS memory. Since we use
779 * buffers to map stuff in and out, we're limited to the buffer size.
782 cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo,
786 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
787 u_int32_t lengths[CAM_PERIPH_MAXMAPS];
788 u_int32_t dirs[CAM_PERIPH_MAXMAPS];
789 bool misaligned[CAM_PERIPH_MAXMAPS];
791 bzero(mapinfo, sizeof(*mapinfo));
793 maxmap = DFLTPHYS; /* traditional default */
794 else if (maxmap > MAXPHYS)
795 maxmap = MAXPHYS; /* for safety */
796 switch(ccb->ccb_h.func_code) {
798 if (ccb->cdm.match_buf_len == 0) {
799 printf("cam_periph_mapmem: invalid match buffer "
803 if (ccb->cdm.pattern_buf_len > 0) {
804 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
805 lengths[0] = ccb->cdm.pattern_buf_len;
806 dirs[0] = CAM_DIR_OUT;
807 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
808 lengths[1] = ccb->cdm.match_buf_len;
809 dirs[1] = CAM_DIR_IN;
812 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
813 lengths[0] = ccb->cdm.match_buf_len;
814 dirs[0] = CAM_DIR_IN;
818 * This request will not go to the hardware, no reason
819 * to be so strict. vmapbuf() is able to map up to MAXPHYS.
824 case XPT_CONT_TARGET_IO:
825 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
827 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR)
829 data_ptrs[0] = &ccb->csio.data_ptr;
830 lengths[0] = ccb->csio.dxfer_len;
831 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
835 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
837 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR)
839 data_ptrs[0] = &ccb->ataio.data_ptr;
840 lengths[0] = ccb->ataio.dxfer_len;
841 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
845 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
847 /* Two mappings: one for cmd->data and one for cmd->data->data */
848 data_ptrs[0] = (unsigned char **)&ccb->mmcio.cmd.data;
849 lengths[0] = sizeof(struct mmc_data *);
850 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
851 data_ptrs[1] = (unsigned char **)&ccb->mmcio.cmd.data->data;
852 lengths[1] = ccb->mmcio.cmd.data->len;
853 dirs[1] = ccb->ccb_h.flags & CAM_DIR_MASK;
857 data_ptrs[0] = &ccb->smpio.smp_request;
858 lengths[0] = ccb->smpio.smp_request_len;
859 dirs[0] = CAM_DIR_OUT;
860 data_ptrs[1] = &ccb->smpio.smp_response;
861 lengths[1] = ccb->smpio.smp_response_len;
862 dirs[1] = CAM_DIR_IN;
867 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
869 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR)
871 data_ptrs[0] = &ccb->nvmeio.data_ptr;
872 lengths[0] = ccb->nvmeio.dxfer_len;
873 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
876 case XPT_DEV_ADVINFO:
877 if (ccb->cdai.bufsiz == 0)
880 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
881 lengths[0] = ccb->cdai.bufsiz;
882 dirs[0] = CAM_DIR_IN;
886 * This request will not go to the hardware, no reason
887 * to be so strict. vmapbuf() is able to map up to MAXPHYS.
893 break; /* NOTREACHED */
897 * Check the transfer length and permissions first, so we don't
898 * have to unmap any previously mapped buffers.
900 for (i = 0; i < numbufs; i++) {
901 if (lengths[i] > maxmap) {
902 printf("cam_periph_mapmem: attempt to map %lu bytes, "
903 "which is greater than %lu\n",
904 (long)(lengths[i]), (u_long)maxmap);
909 * The userland data pointer passed in may not be page
910 * aligned. vmapbuf() truncates the address to a page
911 * boundary, so if the address isn't page aligned, we'll
912 * need enough space for the given transfer length, plus
913 * whatever extra space is necessary to make it to the page
916 misaligned[i] = (lengths[i] +
917 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK) > MAXPHYS);
921 * This keeps the kernel stack of current thread from getting
922 * swapped. In low-memory situations where the kernel stack might
923 * otherwise get swapped out, this holds it and allows the thread
924 * to make progress and release the kernel mapped pages sooner.
926 * XXX KDM should I use P_NOSWAP instead?
930 for (i = 0; i < numbufs; i++) {
932 /* Save the user's data address. */
933 mapinfo->orig[i] = *data_ptrs[i];
936 * For small buffers use malloc+copyin/copyout instead of
937 * mapping to KVA to avoid expensive TLB shootdowns. For
938 * small allocations malloc is backed by UMA, and so much
939 * cheaper on SMP systems.
941 if ((lengths[i] <= periph_mapmem_thresh || misaligned[i]) &&
942 ccb->ccb_h.func_code != XPT_MMC_IO) {
943 *data_ptrs[i] = malloc(lengths[i], M_CAMPERIPH,
945 if (dirs[i] != CAM_DIR_IN) {
946 if (copyin(mapinfo->orig[i], *data_ptrs[i],
948 free(*data_ptrs[i], M_CAMPERIPH);
949 *data_ptrs[i] = mapinfo->orig[i];
953 bzero(*data_ptrs[i], lengths[i]);
960 mapinfo->bp[i] = uma_zalloc(pbuf_zone, M_WAITOK);
962 /* put our pointer in the data slot */
963 mapinfo->bp[i]->b_data = *data_ptrs[i];
965 /* set the transfer length, we know it's < MAXPHYS */
966 mapinfo->bp[i]->b_bufsize = lengths[i];
968 /* set the direction */
969 mapinfo->bp[i]->b_iocmd = (dirs[i] == CAM_DIR_OUT) ?
970 BIO_WRITE : BIO_READ;
973 * Map the buffer into kernel memory.
975 * Note that useracc() alone is not a sufficient test.
976 * vmapbuf() can still fail due to a smaller file mapped
977 * into a larger area of VM, or if userland races against
978 * vmapbuf() after the useracc() check.
980 if (vmapbuf(mapinfo->bp[i], 1) < 0) {
981 uma_zfree(pbuf_zone, mapinfo->bp[i]);
985 /* set our pointer to the new mapped area */
986 *data_ptrs[i] = mapinfo->bp[i]->b_data;
990 * Now that we've gotten this far, change ownership to the kernel
991 * of the buffers so that we don't run afoul of returning to user
992 * space with locks (on the buffer) held.
994 for (i = 0; i < numbufs; i++) {
996 BUF_KERNPROC(mapinfo->bp[i]);
999 mapinfo->num_bufs_used = numbufs;
1003 for (i--; i >= 0; i--) {
1004 if (mapinfo->bp[i]) {
1005 vunmapbuf(mapinfo->bp[i]);
1006 uma_zfree(pbuf_zone, mapinfo->bp[i]);
1008 free(*data_ptrs[i], M_CAMPERIPH);
1009 *data_ptrs[i] = mapinfo->orig[i];
1016 * Unmap memory segments mapped into kernel virtual address space by
1017 * cam_periph_mapmem().
1020 cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
1023 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
1024 u_int32_t lengths[CAM_PERIPH_MAXMAPS];
1025 u_int32_t dirs[CAM_PERIPH_MAXMAPS];
1027 if (mapinfo->num_bufs_used <= 0) {
1028 /* nothing to free and the process wasn't held. */
1032 switch (ccb->ccb_h.func_code) {
1034 if (ccb->cdm.pattern_buf_len > 0) {
1035 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
1036 lengths[0] = ccb->cdm.pattern_buf_len;
1037 dirs[0] = CAM_DIR_OUT;
1038 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
1039 lengths[1] = ccb->cdm.match_buf_len;
1040 dirs[1] = CAM_DIR_IN;
1043 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
1044 lengths[0] = ccb->cdm.match_buf_len;
1045 dirs[0] = CAM_DIR_IN;
1050 case XPT_CONT_TARGET_IO:
1051 data_ptrs[0] = &ccb->csio.data_ptr;
1052 lengths[0] = ccb->csio.dxfer_len;
1053 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
1057 data_ptrs[0] = &ccb->ataio.data_ptr;
1058 lengths[0] = ccb->ataio.dxfer_len;
1059 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
1063 data_ptrs[0] = (u_int8_t **)&ccb->mmcio.cmd.data;
1064 lengths[0] = sizeof(struct mmc_data *);
1065 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
1066 data_ptrs[1] = (u_int8_t **)&ccb->mmcio.cmd.data->data;
1067 lengths[1] = ccb->mmcio.cmd.data->len;
1068 dirs[1] = ccb->ccb_h.flags & CAM_DIR_MASK;
1072 data_ptrs[0] = &ccb->smpio.smp_request;
1073 lengths[0] = ccb->smpio.smp_request_len;
1074 dirs[0] = CAM_DIR_OUT;
1075 data_ptrs[1] = &ccb->smpio.smp_response;
1076 lengths[1] = ccb->smpio.smp_response_len;
1077 dirs[1] = CAM_DIR_IN;
1081 case XPT_NVME_ADMIN:
1082 data_ptrs[0] = &ccb->nvmeio.data_ptr;
1083 lengths[0] = ccb->nvmeio.dxfer_len;
1084 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
1087 case XPT_DEV_ADVINFO:
1088 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
1089 lengths[0] = ccb->cdai.bufsiz;
1090 dirs[0] = CAM_DIR_IN;
1094 /* allow ourselves to be swapped once again */
1097 break; /* NOTREACHED */
1100 for (i = 0; i < numbufs; i++) {
1101 if (mapinfo->bp[i]) {
1102 /* unmap the buffer */
1103 vunmapbuf(mapinfo->bp[i]);
1105 /* release the buffer */
1106 uma_zfree(pbuf_zone, mapinfo->bp[i]);
1108 if (dirs[i] != CAM_DIR_OUT) {
1109 copyout(*data_ptrs[i], mapinfo->orig[i],
1112 free(*data_ptrs[i], M_CAMPERIPH);
1115 /* Set the user's pointer back to the original value */
1116 *data_ptrs[i] = mapinfo->orig[i];
1119 /* allow ourselves to be swapped once again */
1124 cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr,
1125 int (*error_routine)(union ccb *ccb,
1127 u_int32_t sense_flags))
1136 case CAMGETPASSTHRU:
1137 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
1138 xpt_setup_ccb(&ccb->ccb_h,
1140 CAM_PRIORITY_NORMAL);
1141 ccb->ccb_h.func_code = XPT_GDEVLIST;
1144 * Basically, the point of this is that we go through
1145 * getting the list of devices, until we find a passthrough
1146 * device. In the current version of the CAM code, the
1147 * only way to determine what type of device we're dealing
1148 * with is by its name.
1150 while (found == 0) {
1151 ccb->cgdl.index = 0;
1152 ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS;
1153 while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) {
1155 /* we want the next device in the list */
1157 if (strncmp(ccb->cgdl.periph_name,
1163 if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) &&
1165 ccb->cgdl.periph_name[0] = '\0';
1166 ccb->cgdl.unit_number = 0;
1171 /* copy the result back out */
1172 bcopy(ccb, addr, sizeof(union ccb));
1174 /* and release the ccb */
1175 xpt_release_ccb(ccb);
1186 cam_periph_done_panic(struct cam_periph *periph, union ccb *done_ccb)
1189 panic("%s: already done with ccb %p", __func__, done_ccb);
1193 cam_periph_done(struct cam_periph *periph, union ccb *done_ccb)
1196 /* Caller will release the CCB */
1197 xpt_path_assert(done_ccb->ccb_h.path, MA_OWNED);
1198 done_ccb->ccb_h.cbfcnp = cam_periph_done_panic;
1199 wakeup(&done_ccb->ccb_h.cbfcnp);
1203 cam_periph_ccbwait(union ccb *ccb)
1206 if ((ccb->ccb_h.func_code & XPT_FC_QUEUED) != 0) {
1207 while (ccb->ccb_h.cbfcnp != cam_periph_done_panic)
1208 xpt_path_sleep(ccb->ccb_h.path, &ccb->ccb_h.cbfcnp,
1209 PRIBIO, "cbwait", 0);
1211 KASSERT(ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX &&
1212 (ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG,
1213 ("%s: proceeding with incomplete ccb: ccb=%p, func_code=%#x, "
1214 "status=%#x, index=%d", __func__, ccb, ccb->ccb_h.func_code,
1215 ccb->ccb_h.status, ccb->ccb_h.pinfo.index));
1219 * Dispatch a CCB and wait for it to complete. If the CCB has set a
1220 * callback function (ccb->ccb_h.cbfcnp), it will be overwritten and lost.
1223 cam_periph_runccb(union ccb *ccb,
1224 int (*error_routine)(union ccb *ccb,
1226 u_int32_t sense_flags),
1227 cam_flags camflags, u_int32_t sense_flags,
1230 struct bintime *starttime;
1231 struct bintime ltime;
1234 uint32_t timeout = 1;
1237 xpt_path_assert(ccb->ccb_h.path, MA_OWNED);
1238 KASSERT((ccb->ccb_h.flags & CAM_UNLOCKED) == 0,
1239 ("%s: ccb=%p, func_code=%#x, flags=%#x", __func__, ccb,
1240 ccb->ccb_h.func_code, ccb->ccb_h.flags));
1243 * If the user has supplied a stats structure, and if we understand
1244 * this particular type of ccb, record the transaction start.
1247 (ccb->ccb_h.func_code == XPT_SCSI_IO ||
1248 ccb->ccb_h.func_code == XPT_ATA_IO ||
1249 ccb->ccb_h.func_code == XPT_NVME_IO)) {
1251 binuptime(starttime);
1252 devstat_start_transaction(ds, starttime);
1256 * We must poll the I/O while we're dumping. The scheduler is normally
1257 * stopped for dumping, except when we call doadump from ddb. While the
1258 * scheduler is running in this case, we still need to poll the I/O to
1259 * avoid sleeping waiting for the ccb to complete.
1261 * A panic triggered dump stops the scheduler, any callback from the
1262 * shutdown_post_sync event will run with the scheduler stopped, but
1263 * before we're officially dumping. To avoid hanging in adashutdown
1264 * initiated commands (or other similar situations), we have to test for
1265 * either SCHEDULER_STOPPED() here as well.
1267 * To avoid locking problems, dumping/polling callers must call
1268 * without a periph lock held.
1270 must_poll = dumping || SCHEDULER_STOPPED();
1271 ccb->ccb_h.cbfcnp = cam_periph_done;
1274 * If we're polling, then we need to ensure that we have ample resources
1275 * in the periph. cam_periph_error can reschedule the ccb by calling
1276 * xpt_action and returning ERESTART, so we have to effect the polling
1277 * in the do loop below.
1280 timeout = xpt_poll_setup(ccb);
1284 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
1290 xpt_pollwait(ccb, timeout);
1291 timeout = ccb->ccb_h.timeout * 10;
1293 cam_periph_ccbwait(ccb);
1295 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
1297 else if (error_routine != NULL) {
1298 ccb->ccb_h.cbfcnp = cam_periph_done;
1299 error = (*error_routine)(ccb, camflags, sense_flags);
1302 } while (error == ERESTART);
1305 if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
1306 cam_release_devq(ccb->ccb_h.path,
1307 /* relsim_flags */0,
1310 /* getcount_only */ FALSE);
1311 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1316 devstat_tag_type tag;
1319 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1320 bytes = ccb->csio.dxfer_len - ccb->csio.resid;
1321 tag = (devstat_tag_type)(ccb->csio.tag_action & 0x3);
1322 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1323 bytes = ccb->ataio.dxfer_len - ccb->ataio.resid;
1324 tag = (devstat_tag_type)0;
1325 } else if (ccb->ccb_h.func_code == XPT_NVME_IO) {
1326 bytes = ccb->nvmeio.dxfer_len; /* NB: resid no possible */
1327 tag = (devstat_tag_type)0;
1332 devstat_end_transaction(ds, bytes, tag,
1333 ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) ?
1334 DEVSTAT_NO_DATA : (ccb->ccb_h.flags & CAM_DIR_OUT) ?
1335 DEVSTAT_WRITE : DEVSTAT_READ, NULL, starttime);
1342 cam_freeze_devq(struct cam_path *path)
1344 struct ccb_hdr ccb_h;
1346 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_freeze_devq\n"));
1347 xpt_setup_ccb(&ccb_h, path, /*priority*/1);
1348 ccb_h.func_code = XPT_NOOP;
1349 ccb_h.flags = CAM_DEV_QFREEZE;
1350 xpt_action((union ccb *)&ccb_h);
1354 cam_release_devq(struct cam_path *path, u_int32_t relsim_flags,
1355 u_int32_t openings, u_int32_t arg,
1358 struct ccb_relsim crs;
1360 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_release_devq(%u, %u, %u, %d)\n",
1361 relsim_flags, openings, arg, getcount_only));
1362 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
1363 crs.ccb_h.func_code = XPT_REL_SIMQ;
1364 crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0;
1365 crs.release_flags = relsim_flags;
1366 crs.openings = openings;
1367 crs.release_timeout = arg;
1368 xpt_action((union ccb *)&crs);
1369 return (crs.qfrozen_cnt);
1372 #define saved_ccb_ptr ppriv_ptr0
1374 camperiphdone(struct cam_periph *periph, union ccb *done_ccb)
1376 union ccb *saved_ccb;
1378 struct scsi_start_stop_unit *scsi_cmd;
1379 int error = 0, error_code, sense_key, asc, ascq;
1381 scsi_cmd = (struct scsi_start_stop_unit *)
1382 &done_ccb->csio.cdb_io.cdb_bytes;
1383 status = done_ccb->ccb_h.status;
1385 if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
1386 if (scsi_extract_sense_ccb(done_ccb,
1387 &error_code, &sense_key, &asc, &ascq)) {
1389 * If the error is "invalid field in CDB",
1390 * and the load/eject flag is set, turn the
1391 * flag off and try again. This is just in
1392 * case the drive in question barfs on the
1393 * load eject flag. The CAM code should set
1394 * the load/eject flag by default for
1397 if ((scsi_cmd->opcode == START_STOP_UNIT) &&
1398 ((scsi_cmd->how & SSS_LOEJ) != 0) &&
1399 (asc == 0x24) && (ascq == 0x00)) {
1400 scsi_cmd->how &= ~SSS_LOEJ;
1401 if (status & CAM_DEV_QFRZN) {
1402 cam_release_devq(done_ccb->ccb_h.path,
1404 done_ccb->ccb_h.status &=
1407 xpt_action(done_ccb);
1411 error = cam_periph_error(done_ccb, 0,
1412 SF_RETRY_UA | SF_NO_PRINT);
1413 if (error == ERESTART)
1415 if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) {
1416 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
1417 done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1421 * If we have successfully taken a device from the not
1422 * ready to ready state, re-scan the device and re-get
1423 * the inquiry information. Many devices (mostly disks)
1424 * don't properly report their inquiry information unless
1427 if (scsi_cmd->opcode == START_STOP_UNIT)
1428 xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL);
1431 /* If we tried long wait and still failed, remember that. */
1432 if ((periph->flags & CAM_PERIPH_RECOVERY_WAIT) &&
1433 (done_ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY)) {
1434 periph->flags &= ~CAM_PERIPH_RECOVERY_WAIT;
1435 if (error != 0 && done_ccb->ccb_h.retry_count == 0)
1436 periph->flags |= CAM_PERIPH_RECOVERY_WAIT_FAILED;
1440 * After recovery action(s) completed, return to the original CCB.
1441 * If the recovery CCB has failed, considering its own possible
1442 * retries and recovery, assume we are back in state where we have
1443 * been originally, but without recovery hopes left. In such case,
1444 * after the final attempt below, we cancel any further retries,
1445 * blocking by that also any new recovery attempts for this CCB,
1446 * and the result will be the final one returned to the CCB owher.
1448 saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr;
1449 bcopy(saved_ccb, done_ccb, sizeof(*done_ccb));
1450 xpt_free_ccb(saved_ccb);
1451 if (done_ccb->ccb_h.cbfcnp != camperiphdone)
1452 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG;
1454 done_ccb->ccb_h.retry_count = 0;
1455 xpt_action(done_ccb);
1458 /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */
1459 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
1463 * Generic Async Event handler. Peripheral drivers usually
1464 * filter out the events that require personal attention,
1465 * and leave the rest to this function.
1468 cam_periph_async(struct cam_periph *periph, u_int32_t code,
1469 struct cam_path *path, void *arg)
1472 case AC_LOST_DEVICE:
1473 cam_periph_invalidate(periph);
1481 cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle)
1483 struct ccb_getdevstats cgds;
1485 xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1486 cgds.ccb_h.func_code = XPT_GDEV_STATS;
1487 xpt_action((union ccb *)&cgds);
1488 cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle);
1492 cam_periph_freeze_after_event(struct cam_periph *periph,
1493 struct timeval* event_time, u_int duration_ms)
1495 struct timeval delta;
1496 struct timeval duration_tv;
1498 if (!timevalisset(event_time))
1502 timevalsub(&delta, event_time);
1503 duration_tv.tv_sec = duration_ms / 1000;
1504 duration_tv.tv_usec = (duration_ms % 1000) * 1000;
1505 if (timevalcmp(&delta, &duration_tv, <)) {
1506 timevalsub(&duration_tv, &delta);
1508 duration_ms = duration_tv.tv_sec * 1000;
1509 duration_ms += duration_tv.tv_usec / 1000;
1510 cam_freeze_devq(periph->path);
1511 cam_release_devq(periph->path,
1512 RELSIM_RELEASE_AFTER_TIMEOUT,
1514 /*timeout*/duration_ms,
1515 /*getcount_only*/0);
1521 camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb,
1522 cam_flags camflags, u_int32_t sense_flags,
1523 int *openings, u_int32_t *relsim_flags,
1524 u_int32_t *timeout, u_int32_t *action, const char **action_string)
1526 struct cam_periph *periph;
1529 switch (ccb->csio.scsi_status) {
1530 case SCSI_STATUS_OK:
1531 case SCSI_STATUS_COND_MET:
1532 case SCSI_STATUS_INTERMED:
1533 case SCSI_STATUS_INTERMED_COND_MET:
1536 case SCSI_STATUS_CMD_TERMINATED:
1537 case SCSI_STATUS_CHECK_COND:
1538 error = camperiphscsisenseerror(ccb, orig_ccb,
1547 case SCSI_STATUS_QUEUE_FULL:
1550 struct ccb_getdevstats cgds;
1553 * First off, find out what the current
1554 * transaction counts are.
1556 xpt_setup_ccb(&cgds.ccb_h,
1558 CAM_PRIORITY_NORMAL);
1559 cgds.ccb_h.func_code = XPT_GDEV_STATS;
1560 xpt_action((union ccb *)&cgds);
1563 * If we were the only transaction active, treat
1564 * the QUEUE FULL as if it were a BUSY condition.
1566 if (cgds.dev_active != 0) {
1570 * Reduce the number of openings to
1571 * be 1 less than the amount it took
1572 * to get a queue full bounded by the
1573 * minimum allowed tag count for this
1576 total_openings = cgds.dev_active + cgds.dev_openings;
1577 *openings = cgds.dev_active;
1578 if (*openings < cgds.mintags)
1579 *openings = cgds.mintags;
1580 if (*openings < total_openings)
1581 *relsim_flags = RELSIM_ADJUST_OPENINGS;
1584 * Some devices report queue full for
1585 * temporary resource shortages. For
1586 * this reason, we allow a minimum
1587 * tag count to be entered via a
1588 * quirk entry to prevent the queue
1589 * count on these devices from falling
1590 * to a pessimisticly low value. We
1591 * still wait for the next successful
1592 * completion, however, before queueing
1593 * more transactions to the device.
1595 *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT;
1599 *action &= ~SSQ_PRINT_SENSE;
1604 case SCSI_STATUS_BUSY:
1606 * Restart the queue after either another
1607 * command completes or a 1 second timeout.
1609 periph = xpt_path_periph(ccb->ccb_h.path);
1610 if (periph->flags & CAM_PERIPH_INVALID) {
1612 *action_string = "Periph was invalidated";
1613 } else if ((sense_flags & SF_RETRY_BUSY) != 0 ||
1614 ccb->ccb_h.retry_count > 0) {
1615 if ((sense_flags & SF_RETRY_BUSY) == 0)
1616 ccb->ccb_h.retry_count--;
1618 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT
1619 | RELSIM_RELEASE_AFTER_CMDCMPLT;
1623 *action_string = "Retries exhausted";
1626 case SCSI_STATUS_RESERV_CONFLICT:
1635 camperiphscsisenseerror(union ccb *ccb, union ccb **orig,
1636 cam_flags camflags, u_int32_t sense_flags,
1637 int *openings, u_int32_t *relsim_flags,
1638 u_int32_t *timeout, u_int32_t *action, const char **action_string)
1640 struct cam_periph *periph;
1641 union ccb *orig_ccb = ccb;
1642 int error, recoveryccb;
1644 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
1645 if (ccb->ccb_h.func_code == XPT_SCSI_IO && ccb->csio.bio != NULL)
1646 biotrack(ccb->csio.bio, __func__);
1649 periph = xpt_path_periph(ccb->ccb_h.path);
1650 recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone);
1651 if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) {
1653 * If error recovery is already in progress, don't attempt
1654 * to process this error, but requeue it unconditionally
1655 * and attempt to process it once error recovery has
1656 * completed. This failed command is probably related to
1657 * the error that caused the currently active error recovery
1658 * action so our current recovery efforts should also
1659 * address this command. Be aware that the error recovery
1660 * code assumes that only one recovery action is in progress
1661 * on a particular peripheral instance at any given time
1662 * (e.g. only one saved CCB for error recovery) so it is
1663 * imperitive that we don't violate this assumption.
1666 *action &= ~SSQ_PRINT_SENSE;
1668 scsi_sense_action err_action;
1669 struct ccb_getdev cgd;
1672 * Grab the inquiry data for this device.
1674 xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL);
1675 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
1676 xpt_action((union ccb *)&cgd);
1678 err_action = scsi_error_action(&ccb->csio, &cgd.inq_data,
1680 error = err_action & SS_ERRMASK;
1683 * Do not autostart sequential access devices
1684 * to avoid unexpected tape loading.
1686 if ((err_action & SS_MASK) == SS_START &&
1687 SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) {
1688 *action_string = "Will not autostart a "
1689 "sequential access device";
1690 goto sense_error_done;
1694 * Avoid recovery recursion if recovery action is the same.
1696 if ((err_action & SS_MASK) >= SS_START && recoveryccb) {
1697 if (((err_action & SS_MASK) == SS_START &&
1698 ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) ||
1699 ((err_action & SS_MASK) == SS_TUR &&
1700 (ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) {
1701 err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO;
1702 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1708 * If the recovery action will consume a retry,
1709 * make sure we actually have retries available.
1711 if ((err_action & SSQ_DECREMENT_COUNT) != 0) {
1712 if (ccb->ccb_h.retry_count > 0 &&
1713 (periph->flags & CAM_PERIPH_INVALID) == 0)
1714 ccb->ccb_h.retry_count--;
1716 *action_string = "Retries exhausted";
1717 goto sense_error_done;
1721 if ((err_action & SS_MASK) >= SS_START) {
1723 * Do common portions of commands that
1724 * use recovery CCBs.
1726 orig_ccb = xpt_alloc_ccb_nowait();
1727 if (orig_ccb == NULL) {
1728 *action_string = "Can't allocate recovery CCB";
1729 goto sense_error_done;
1732 * Clear freeze flag for original request here, as
1733 * this freeze will be dropped as part of ERESTART.
1735 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1736 bcopy(ccb, orig_ccb, sizeof(*orig_ccb));
1739 switch (err_action & SS_MASK) {
1741 *action_string = "No recovery action needed";
1745 *action_string = "Retrying command (per sense data)";
1749 *action_string = "Unretryable error";
1756 * Send a start unit command to the device, and
1757 * then retry the command.
1759 *action_string = "Attempting to start unit";
1760 periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
1763 * Check for removable media and set
1764 * load/eject flag appropriately.
1766 if (SID_IS_REMOVABLE(&cgd.inq_data))
1771 scsi_start_stop(&ccb->csio,
1785 * Send a Test Unit Ready to the device.
1786 * If the 'many' flag is set, we send 120
1787 * test unit ready commands, one every half
1788 * second. Otherwise, we just send one TUR.
1789 * We only want to do this if the retry
1790 * count has not been exhausted.
1794 if ((err_action & SSQ_MANY) != 0 && (periph->flags &
1795 CAM_PERIPH_RECOVERY_WAIT_FAILED) == 0) {
1796 periph->flags |= CAM_PERIPH_RECOVERY_WAIT;
1797 *action_string = "Polling device for readiness";
1800 *action_string = "Testing device for readiness";
1803 periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
1804 scsi_test_unit_ready(&ccb->csio,
1812 * Accomplish our 500ms delay by deferring
1813 * the release of our device queue appropriately.
1815 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1820 panic("Unhandled error action %x", err_action);
1823 if ((err_action & SS_MASK) >= SS_START) {
1825 * Drop the priority, so that the recovery
1826 * CCB is the first to execute. Freeze the queue
1827 * after this command is sent so that we can
1828 * restore the old csio and have it queued in
1829 * the proper order before we release normal
1830 * transactions to the device.
1832 ccb->ccb_h.pinfo.priority--;
1833 ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
1834 ccb->ccb_h.saved_ccb_ptr = orig_ccb;
1840 *action = err_action;
1846 * Generic error handler. Peripheral drivers usually filter
1847 * out the errors that they handle in a unique manner, then
1848 * call this function.
1851 cam_periph_error(union ccb *ccb, cam_flags camflags,
1852 u_int32_t sense_flags)
1854 struct cam_path *newpath;
1855 union ccb *orig_ccb, *scan_ccb;
1856 struct cam_periph *periph;
1857 const char *action_string;
1859 int frozen, error, openings, devctl_err;
1860 u_int32_t action, relsim_flags, timeout;
1862 action = SSQ_PRINT_SENSE;
1863 periph = xpt_path_periph(ccb->ccb_h.path);
1864 action_string = NULL;
1865 status = ccb->ccb_h.status;
1866 frozen = (status & CAM_DEV_QFRZN) != 0;
1867 status &= CAM_STATUS_MASK;
1868 devctl_err = openings = relsim_flags = timeout = 0;
1871 /* Filter the errors that should be reported via devctl */
1872 switch (ccb->ccb_h.status & CAM_STATUS_MASK) {
1873 case CAM_CMD_TIMEOUT:
1874 case CAM_REQ_ABORTED:
1875 case CAM_REQ_CMP_ERR:
1876 case CAM_REQ_TERMIO:
1877 case CAM_UNREC_HBA_ERROR:
1878 case CAM_DATA_RUN_ERR:
1879 case CAM_SCSI_STATUS_ERROR:
1880 case CAM_ATA_STATUS_ERROR:
1881 case CAM_SMP_STATUS_ERROR:
1891 action &= ~SSQ_PRINT_SENSE;
1893 case CAM_SCSI_STATUS_ERROR:
1894 error = camperiphscsistatuserror(ccb, &orig_ccb,
1895 camflags, sense_flags, &openings, &relsim_flags,
1896 &timeout, &action, &action_string);
1898 case CAM_AUTOSENSE_FAIL:
1899 error = EIO; /* we have to kill the command */
1903 case CAM_MSG_REJECT_REC:
1904 /* XXX Don't know that these are correct */
1907 case CAM_SEL_TIMEOUT:
1908 if ((camflags & CAM_RETRY_SELTO) != 0) {
1909 if (ccb->ccb_h.retry_count > 0 &&
1910 (periph->flags & CAM_PERIPH_INVALID) == 0) {
1911 ccb->ccb_h.retry_count--;
1915 * Wait a bit to give the device
1916 * time to recover before we try again.
1918 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1919 timeout = periph_selto_delay;
1922 action_string = "Retries exhausted";
1925 case CAM_DEV_NOT_THERE:
1929 case CAM_REQ_INVALID:
1930 case CAM_PATH_INVALID:
1932 case CAM_PROVIDE_FAIL:
1933 case CAM_REQ_TOO_BIG:
1934 case CAM_LUN_INVALID:
1935 case CAM_TID_INVALID:
1936 case CAM_FUNC_NOTAVAIL:
1939 case CAM_SCSI_BUS_RESET:
1942 * Commands that repeatedly timeout and cause these
1943 * kinds of error recovery actions, should return
1944 * CAM_CMD_TIMEOUT, which allows us to safely assume
1945 * that this command was an innocent bystander to
1946 * these events and should be unconditionally
1949 case CAM_REQUEUE_REQ:
1950 /* Unconditional requeue if device is still there */
1951 if (periph->flags & CAM_PERIPH_INVALID) {
1952 action_string = "Periph was invalidated";
1954 } else if (sense_flags & SF_NO_RETRY) {
1956 action_string = "Retry was blocked";
1959 action &= ~SSQ_PRINT_SENSE;
1962 case CAM_RESRC_UNAVAIL:
1963 /* Wait a bit for the resource shortage to abate. */
1964 timeout = periph_noresrc_delay;
1968 /* Wait a bit for the busy condition to abate. */
1969 timeout = periph_busy_delay;
1971 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1973 case CAM_ATA_STATUS_ERROR:
1974 case CAM_REQ_CMP_ERR:
1975 case CAM_CMD_TIMEOUT:
1976 case CAM_UNEXP_BUSFREE:
1977 case CAM_UNCOR_PARITY:
1978 case CAM_DATA_RUN_ERR:
1980 if (periph->flags & CAM_PERIPH_INVALID) {
1982 action_string = "Periph was invalidated";
1983 } else if (ccb->ccb_h.retry_count == 0) {
1985 action_string = "Retries exhausted";
1986 } else if (sense_flags & SF_NO_RETRY) {
1988 action_string = "Retry was blocked";
1990 ccb->ccb_h.retry_count--;
1996 if ((sense_flags & SF_PRINT_ALWAYS) ||
1997 CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO))
1998 action |= SSQ_PRINT_SENSE;
1999 else if (sense_flags & SF_NO_PRINT)
2000 action &= ~SSQ_PRINT_SENSE;
2001 if ((action & SSQ_PRINT_SENSE) != 0)
2002 cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL);
2003 if (error != 0 && (action & SSQ_PRINT_SENSE) != 0) {
2004 if (error != ERESTART) {
2005 if (action_string == NULL)
2006 action_string = "Unretryable error";
2007 xpt_print(ccb->ccb_h.path, "Error %d, %s\n",
2008 error, action_string);
2009 } else if (action_string != NULL)
2010 xpt_print(ccb->ccb_h.path, "%s\n", action_string);
2012 xpt_print(ccb->ccb_h.path,
2013 "Retrying command, %d more tries remain\n",
2014 ccb->ccb_h.retry_count);
2018 if (devctl_err && (error != 0 || (action & SSQ_PRINT_SENSE) != 0))
2019 cam_periph_devctl_notify(orig_ccb);
2021 if ((action & SSQ_LOST) != 0) {
2025 * For a selection timeout, we consider all of the LUNs on
2026 * the target to be gone. If the status is CAM_DEV_NOT_THERE,
2027 * then we only get rid of the device(s) specified by the
2028 * path in the original CCB.
2030 if (status == CAM_SEL_TIMEOUT)
2031 lun_id = CAM_LUN_WILDCARD;
2033 lun_id = xpt_path_lun_id(ccb->ccb_h.path);
2035 /* Should we do more if we can't create the path?? */
2036 if (xpt_create_path(&newpath, periph,
2037 xpt_path_path_id(ccb->ccb_h.path),
2038 xpt_path_target_id(ccb->ccb_h.path),
2039 lun_id) == CAM_REQ_CMP) {
2042 * Let peripheral drivers know that this
2043 * device has gone away.
2045 xpt_async(AC_LOST_DEVICE, newpath, NULL);
2046 xpt_free_path(newpath);
2050 /* Broadcast UNIT ATTENTIONs to all periphs. */
2051 if ((action & SSQ_UA) != 0)
2052 xpt_async(AC_UNIT_ATTENTION, orig_ccb->ccb_h.path, orig_ccb);
2054 /* Rescan target on "Reported LUNs data has changed" */
2055 if ((action & SSQ_RESCAN) != 0) {
2056 if (xpt_create_path(&newpath, NULL,
2057 xpt_path_path_id(ccb->ccb_h.path),
2058 xpt_path_target_id(ccb->ccb_h.path),
2059 CAM_LUN_WILDCARD) == CAM_REQ_CMP) {
2061 scan_ccb = xpt_alloc_ccb_nowait();
2062 if (scan_ccb != NULL) {
2063 scan_ccb->ccb_h.path = newpath;
2064 scan_ccb->ccb_h.func_code = XPT_SCAN_TGT;
2065 scan_ccb->crcn.flags = 0;
2066 xpt_rescan(scan_ccb);
2069 "Can't allocate CCB to rescan target\n");
2070 xpt_free_path(newpath);
2075 /* Attempt a retry */
2076 if (error == ERESTART || error == 0) {
2078 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
2079 if (error == ERESTART)
2082 cam_release_devq(ccb->ccb_h.path,
2086 /*getcount_only*/0);
2092 #define CAM_PERIPH_DEVD_MSG_SIZE 256
2095 cam_periph_devctl_notify(union ccb *ccb)
2097 struct cam_periph *periph;
2098 struct ccb_getdev *cgd;
2100 int serr, sk, asc, ascq;
2103 sbmsg = malloc(CAM_PERIPH_DEVD_MSG_SIZE, M_CAMPERIPH, M_NOWAIT);
2107 sbuf_new(&sb, sbmsg, CAM_PERIPH_DEVD_MSG_SIZE, SBUF_FIXEDLEN);
2109 periph = xpt_path_periph(ccb->ccb_h.path);
2110 sbuf_printf(&sb, "device=%s%d ", periph->periph_name,
2111 periph->unit_number);
2113 sbuf_printf(&sb, "serial=\"");
2114 if ((cgd = (struct ccb_getdev *)xpt_alloc_ccb_nowait()) != NULL) {
2115 xpt_setup_ccb(&cgd->ccb_h, ccb->ccb_h.path,
2116 CAM_PRIORITY_NORMAL);
2117 cgd->ccb_h.func_code = XPT_GDEV_TYPE;
2118 xpt_action((union ccb *)cgd);
2120 if (cgd->ccb_h.status == CAM_REQ_CMP)
2121 sbuf_bcat(&sb, cgd->serial_num, cgd->serial_num_len);
2122 xpt_free_ccb((union ccb *)cgd);
2124 sbuf_printf(&sb, "\" ");
2125 sbuf_printf(&sb, "cam_status=\"0x%x\" ", ccb->ccb_h.status);
2127 switch (ccb->ccb_h.status & CAM_STATUS_MASK) {
2128 case CAM_CMD_TIMEOUT:
2129 sbuf_printf(&sb, "timeout=%d ", ccb->ccb_h.timeout);
2132 case CAM_SCSI_STATUS_ERROR:
2133 sbuf_printf(&sb, "scsi_status=%d ", ccb->csio.scsi_status);
2134 if (scsi_extract_sense_ccb(ccb, &serr, &sk, &asc, &ascq))
2135 sbuf_printf(&sb, "scsi_sense=\"%02x %02x %02x %02x\" ",
2136 serr, sk, asc, ascq);
2139 case CAM_ATA_STATUS_ERROR:
2140 sbuf_printf(&sb, "RES=\"");
2141 ata_res_sbuf(&ccb->ataio.res, &sb);
2142 sbuf_printf(&sb, "\" ");
2150 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
2151 sbuf_printf(&sb, "CDB=\"");
2152 scsi_cdb_sbuf(scsiio_cdb_ptr(&ccb->csio), &sb);
2153 sbuf_printf(&sb, "\" ");
2154 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) {
2155 sbuf_printf(&sb, "ACB=\"");
2156 ata_cmd_sbuf(&ccb->ataio.cmd, &sb);
2157 sbuf_printf(&sb, "\" ");
2160 if (sbuf_finish(&sb) == 0)
2161 devctl_notify("CAM", "periph", type, sbuf_data(&sb));
2163 free(sbmsg, M_CAMPERIPH);
2167 * Sysctl to force an invalidation of the drive right now. Can be
2168 * called with CTLFLAG_MPSAFE since we take periph lock.
2171 cam_periph_invalidate_sysctl(SYSCTL_HANDLER_ARGS)
2173 struct cam_periph *periph;
2178 error = sysctl_handle_int(oidp, &value, 0, req);
2179 if (error != 0 || req->newptr == NULL || value != 1)
2182 cam_periph_lock(periph);
2183 cam_periph_invalidate(periph);
2184 cam_periph_unlock(periph);