2 * Implementation of the Common Access Method Transport (XPT) layer.
4 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
6 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
7 * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification, immediately at the beginning of the file.
16 * 2. The name of the author may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #include "opt_printf.h"
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD$");
37 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/types.h>
42 #include <sys/malloc.h>
43 #include <sys/kernel.h>
46 #include <sys/fcntl.h>
47 #include <sys/interrupt.h>
51 #include <sys/taskqueue.h>
54 #include <sys/mutex.h>
55 #include <sys/sysctl.h>
56 #include <sys/kthread.h>
59 #include <cam/cam_ccb.h>
60 #include <cam/cam_iosched.h>
61 #include <cam/cam_periph.h>
62 #include <cam/cam_queue.h>
63 #include <cam/cam_sim.h>
64 #include <cam/cam_xpt.h>
65 #include <cam/cam_xpt_sim.h>
66 #include <cam/cam_xpt_periph.h>
67 #include <cam/cam_xpt_internal.h>
68 #include <cam/cam_debug.h>
69 #include <cam/cam_compat.h>
71 #include <cam/scsi/scsi_all.h>
72 #include <cam/scsi/scsi_message.h>
73 #include <cam/scsi/scsi_pass.h>
75 #include <machine/md_var.h> /* geometry translation */
76 #include <machine/stdarg.h> /* for xpt_print below */
80 /* Wild guess based on not wanting to grow the stack too much */
81 #define XPT_PRINT_MAXLEN 512
82 #ifdef PRINTF_BUFR_SIZE
83 #define XPT_PRINT_LEN PRINTF_BUFR_SIZE
85 #define XPT_PRINT_LEN 128
87 _Static_assert(XPT_PRINT_LEN <= XPT_PRINT_MAXLEN, "XPT_PRINT_LEN is too large");
90 * This is the maximum number of high powered commands (e.g. start unit)
91 * that can be outstanding at a particular time.
93 #ifndef CAM_MAX_HIGHPOWER
94 #define CAM_MAX_HIGHPOWER 4
97 /* Datastructures internal to the xpt layer */
98 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
99 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
100 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
101 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
103 /* Object for defering XPT actions to a taskqueue */
111 uint32_t xpt_generation;
113 /* number of high powered commands that can go through right now */
114 struct mtx xpt_highpower_lock;
115 STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
118 /* queue for handling async rescan requests. */
119 TAILQ_HEAD(, ccb_hdr) ccb_scanq;
121 int buses_config_done;
127 * N.B., "busses" is an archaic spelling of "buses". In new code
128 * "buses" is preferred.
130 TAILQ_HEAD(,cam_eb) xpt_busses;
131 u_int bus_generation;
133 struct intr_config_hook *xpt_config_hook;
136 struct callout boot_callout;
138 struct mtx xpt_topo_lock;
140 struct taskqueue *xpt_taskq;
145 DM_RET_FLAG_MASK = 0x0f,
148 DM_RET_DESCEND = 0x20,
150 DM_RET_ACTION_MASK = 0xf0
158 } xpt_traverse_depth;
160 struct xpt_traverse_config {
161 xpt_traverse_depth depth;
166 typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
167 typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
168 typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
169 typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
170 typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
172 /* Transport layer configuration information */
173 static struct xpt_softc xsoftc;
175 MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF);
177 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
178 &xsoftc.boot_delay, 0, "Bus registration wait time");
179 SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD,
180 &xsoftc.xpt_generation, 0, "CAM peripheral generation count");
181 SYSCTL_INT(_kern_cam, OID_AUTO, announce_nosbuf, CTLFLAG_RWTUN,
182 &xsoftc.announce_nosbuf, 0, "Don't use sbuf for announcements");
185 struct mtx_padalign cam_doneq_mtx;
186 STAILQ_HEAD(, ccb_hdr) cam_doneq;
190 static struct cam_doneq cam_doneqs[MAXCPU];
191 static int cam_num_doneqs;
192 static struct proc *cam_proc;
194 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
195 &cam_num_doneqs, 0, "Number of completion queues/threads");
197 struct cam_periph *xpt_periph;
199 static periph_init_t xpt_periph_init;
201 static struct periph_driver xpt_driver =
203 xpt_periph_init, "xpt",
204 TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
208 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
210 static d_open_t xptopen;
211 static d_close_t xptclose;
212 static d_ioctl_t xptioctl;
213 static d_ioctl_t xptdoioctl;
215 static struct cdevsw xpt_cdevsw = {
216 .d_version = D_VERSION,
224 /* Storage for debugging datastructures */
225 struct cam_path *cam_dpath;
226 u_int32_t cam_dflags = CAM_DEBUG_FLAGS;
227 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN,
228 &cam_dflags, 0, "Enabled debug flags");
229 u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
230 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN,
231 &cam_debug_delay, 0, "Delay in us after each debug message");
233 /* Our boot-time initialization hook */
234 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
236 static moduledata_t cam_moduledata = {
238 cam_module_event_handler,
242 static int xpt_init(void *);
244 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
245 MODULE_VERSION(cam, 1);
248 static void xpt_async_bcast(struct async_list *async_head,
249 u_int32_t async_code,
250 struct cam_path *path,
252 static path_id_t xptnextfreepathid(void);
253 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
254 static union ccb *xpt_get_ccb(struct cam_periph *periph);
255 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
256 static void xpt_run_allocq(struct cam_periph *periph, int sleep);
257 static void xpt_run_allocq_task(void *context, int pending);
258 static void xpt_run_devq(struct cam_devq *devq);
259 static timeout_t xpt_release_devq_timeout;
260 static void xpt_release_simq_timeout(void *arg) __unused;
261 static void xpt_acquire_bus(struct cam_eb *bus);
262 static void xpt_release_bus(struct cam_eb *bus);
263 static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
264 static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
266 static struct cam_et*
267 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
268 static void xpt_acquire_target(struct cam_et *target);
269 static void xpt_release_target(struct cam_et *target);
270 static struct cam_eb*
271 xpt_find_bus(path_id_t path_id);
272 static struct cam_et*
273 xpt_find_target(struct cam_eb *bus, target_id_t target_id);
274 static struct cam_ed*
275 xpt_find_device(struct cam_et *target, lun_id_t lun_id);
276 static void xpt_config(void *arg);
277 static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
278 u_int32_t new_priority);
279 static xpt_devicefunc_t xptpassannouncefunc;
280 static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
281 static void xptpoll(struct cam_sim *sim);
282 static void camisr_runqueue(void);
283 static void xpt_done_process(struct ccb_hdr *ccb_h);
284 static void xpt_done_td(void *);
285 static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
286 u_int num_patterns, struct cam_eb *bus);
287 static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
289 struct cam_ed *device);
290 static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
292 struct cam_periph *periph);
293 static xpt_busfunc_t xptedtbusfunc;
294 static xpt_targetfunc_t xptedttargetfunc;
295 static xpt_devicefunc_t xptedtdevicefunc;
296 static xpt_periphfunc_t xptedtperiphfunc;
297 static xpt_pdrvfunc_t xptplistpdrvfunc;
298 static xpt_periphfunc_t xptplistperiphfunc;
299 static int xptedtmatch(struct ccb_dev_match *cdm);
300 static int xptperiphlistmatch(struct ccb_dev_match *cdm);
301 static int xptbustraverse(struct cam_eb *start_bus,
302 xpt_busfunc_t *tr_func, void *arg);
303 static int xpttargettraverse(struct cam_eb *bus,
304 struct cam_et *start_target,
305 xpt_targetfunc_t *tr_func, void *arg);
306 static int xptdevicetraverse(struct cam_et *target,
307 struct cam_ed *start_device,
308 xpt_devicefunc_t *tr_func, void *arg);
309 static int xptperiphtraverse(struct cam_ed *device,
310 struct cam_periph *start_periph,
311 xpt_periphfunc_t *tr_func, void *arg);
312 static int xptpdrvtraverse(struct periph_driver **start_pdrv,
313 xpt_pdrvfunc_t *tr_func, void *arg);
314 static int xptpdperiphtraverse(struct periph_driver **pdrv,
315 struct cam_periph *start_periph,
316 xpt_periphfunc_t *tr_func,
318 static xpt_busfunc_t xptdefbusfunc;
319 static xpt_targetfunc_t xptdeftargetfunc;
320 static xpt_devicefunc_t xptdefdevicefunc;
321 static xpt_periphfunc_t xptdefperiphfunc;
322 static void xpt_finishconfig_task(void *context, int pending);
323 static void xpt_dev_async_default(u_int32_t async_code,
325 struct cam_et *target,
326 struct cam_ed *device,
328 static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
329 struct cam_et *target,
331 static xpt_devicefunc_t xptsetasyncfunc;
332 static xpt_busfunc_t xptsetasyncbusfunc;
333 static cam_status xptregister(struct cam_periph *periph,
335 static __inline int device_is_queued(struct cam_ed *device);
338 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
342 mtx_assert(&devq->send_mtx, MA_OWNED);
343 if ((dev->ccbq.queue.entries > 0) &&
344 (dev->ccbq.dev_openings > 0) &&
345 (dev->ccbq.queue.qfrozen_cnt == 0)) {
347 * The priority of a device waiting for controller
348 * resources is that of the highest priority CCB
352 xpt_schedule_dev(&devq->send_queue,
354 CAMQ_GET_PRIO(&dev->ccbq.queue));
362 device_is_queued(struct cam_ed *device)
364 return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
370 make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
374 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
378 * Only allow read-write access.
380 if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
384 * We don't allow nonblocking access.
386 if ((flags & O_NONBLOCK) != 0) {
387 printf("%s: can't do nonblocking access\n", devtoname(dev));
395 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
402 * Don't automatically grab the xpt softc lock here even though this is going
403 * through the xpt device. The xpt device is really just a back door for
404 * accessing other devices and SIMs, so the right thing to do is to grab
405 * the appropriate SIM lock once the bus/SIM is located.
408 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
412 if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
413 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
419 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
427 * For the transport layer CAMIOCOMMAND ioctl, we really only want
428 * to accept CCB types that don't quite make sense to send through a
429 * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
437 inccb = (union ccb *)addr;
438 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
439 if (inccb->ccb_h.func_code == XPT_SCSI_IO)
440 inccb->csio.bio = NULL;
443 if (inccb->ccb_h.flags & CAM_UNLOCKED)
446 bus = xpt_find_bus(inccb->ccb_h.path_id);
450 switch (inccb->ccb_h.func_code) {
453 if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
454 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
455 xpt_release_bus(bus);
460 if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
461 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
462 xpt_release_bus(bus);
470 switch(inccb->ccb_h.func_code) {
478 ccb = xpt_alloc_ccb();
481 * Create a path using the bus, target, and lun the
484 if (xpt_create_path(&ccb->ccb_h.path, NULL,
485 inccb->ccb_h.path_id,
486 inccb->ccb_h.target_id,
487 inccb->ccb_h.target_lun) !=
493 /* Ensure all of our fields are correct */
494 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
495 inccb->ccb_h.pinfo.priority);
496 xpt_merge_ccb(ccb, inccb);
497 xpt_path_lock(ccb->ccb_h.path);
498 cam_periph_runccb(ccb, NULL, 0, 0, NULL);
499 xpt_path_unlock(ccb->ccb_h.path);
500 bcopy(ccb, inccb, sizeof(union ccb));
501 xpt_free_path(ccb->ccb_h.path);
509 * This is an immediate CCB, so it's okay to
510 * allocate it on the stack.
514 * Create a path using the bus, target, and lun the
517 if (xpt_create_path(&ccb.ccb_h.path, NULL,
518 inccb->ccb_h.path_id,
519 inccb->ccb_h.target_id,
520 inccb->ccb_h.target_lun) !=
525 /* Ensure all of our fields are correct */
526 xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
527 inccb->ccb_h.pinfo.priority);
528 xpt_merge_ccb(&ccb, inccb);
530 bcopy(&ccb, inccb, sizeof(union ccb));
531 xpt_free_path(ccb.ccb_h.path);
535 case XPT_DEV_MATCH: {
536 struct cam_periph_map_info mapinfo;
537 struct cam_path *old_path;
540 * We can't deal with physical addresses for this
541 * type of transaction.
543 if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
550 * Save this in case the caller had it set to
551 * something in particular.
553 old_path = inccb->ccb_h.path;
556 * We really don't need a path for the matching
557 * code. The path is needed because of the
558 * debugging statements in xpt_action(). They
559 * assume that the CCB has a valid path.
561 inccb->ccb_h.path = xpt_periph->path;
563 bzero(&mapinfo, sizeof(mapinfo));
566 * Map the pattern and match buffers into kernel
567 * virtual address space.
569 error = cam_periph_mapmem(inccb, &mapinfo, MAXPHYS);
572 inccb->ccb_h.path = old_path;
577 * This is an immediate CCB, we can send it on directly.
582 * Map the buffers back into user space.
584 cam_periph_unmapmem(inccb, &mapinfo);
586 inccb->ccb_h.path = old_path;
595 xpt_release_bus(bus);
599 * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
600 * with the periphal driver name and unit name filled in. The other
601 * fields don't really matter as input. The passthrough driver name
602 * ("pass"), and unit number are passed back in the ccb. The current
603 * device generation number, and the index into the device peripheral
604 * driver list, and the status are also passed back. Note that
605 * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
606 * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
607 * (or rather should be) impossible for the device peripheral driver
608 * list to change since we look at the whole thing in one pass, and
609 * we do it with lock protection.
612 case CAMGETPASSTHRU: {
614 struct cam_periph *periph;
615 struct periph_driver **p_drv;
618 int base_periph_found;
620 ccb = (union ccb *)addr;
621 unit = ccb->cgdl.unit_number;
622 name = ccb->cgdl.periph_name;
623 base_periph_found = 0;
624 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
625 if (ccb->ccb_h.func_code == XPT_SCSI_IO)
626 ccb->csio.bio = NULL;
630 * Sanity check -- make sure we don't get a null peripheral
633 if (*ccb->cgdl.periph_name == '\0') {
638 /* Keep the list from changing while we traverse it */
641 /* first find our driver in the list of drivers */
642 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
643 if (strcmp((*p_drv)->driver_name, name) == 0)
646 if (*p_drv == NULL) {
648 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
649 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
650 *ccb->cgdl.periph_name = '\0';
651 ccb->cgdl.unit_number = 0;
657 * Run through every peripheral instance of this driver
658 * and check to see whether it matches the unit passed
659 * in by the user. If it does, get out of the loops and
660 * find the passthrough driver associated with that
663 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
664 periph = TAILQ_NEXT(periph, unit_links)) {
666 if (periph->unit_number == unit)
670 * If we found the peripheral driver that the user passed
671 * in, go through all of the peripheral drivers for that
672 * particular device and look for a passthrough driver.
674 if (periph != NULL) {
675 struct cam_ed *device;
678 base_periph_found = 1;
679 device = periph->path->device;
680 for (i = 0, periph = SLIST_FIRST(&device->periphs);
682 periph = SLIST_NEXT(periph, periph_links), i++) {
684 * Check to see whether we have a
685 * passthrough device or not.
687 if (strcmp(periph->periph_name, "pass") == 0) {
689 * Fill in the getdevlist fields.
691 strlcpy(ccb->cgdl.periph_name,
693 sizeof(ccb->cgdl.periph_name));
694 ccb->cgdl.unit_number =
696 if (SLIST_NEXT(periph, periph_links))
698 CAM_GDEVLIST_MORE_DEVS;
701 CAM_GDEVLIST_LAST_DEVICE;
702 ccb->cgdl.generation =
706 * Fill in some CCB header fields
707 * that the user may want.
710 periph->path->bus->path_id;
711 ccb->ccb_h.target_id =
712 periph->path->target->target_id;
713 ccb->ccb_h.target_lun =
714 periph->path->device->lun_id;
715 ccb->ccb_h.status = CAM_REQ_CMP;
722 * If the periph is null here, one of two things has
723 * happened. The first possibility is that we couldn't
724 * find the unit number of the particular peripheral driver
725 * that the user is asking about. e.g. the user asks for
726 * the passthrough driver for "da11". We find the list of
727 * "da" peripherals all right, but there is no unit 11.
728 * The other possibility is that we went through the list
729 * of peripheral drivers attached to the device structure,
730 * but didn't find one with the name "pass". Either way,
731 * we return ENOENT, since we couldn't find something.
733 if (periph == NULL) {
734 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
735 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
736 *ccb->cgdl.periph_name = '\0';
737 ccb->cgdl.unit_number = 0;
740 * It is unfortunate that this is even necessary,
741 * but there are many, many clueless users out there.
742 * If this is true, the user is looking for the
743 * passthrough driver, but doesn't have one in his
746 if (base_periph_found == 1) {
747 printf("xptioctl: pass driver is not in the "
749 printf("xptioctl: put \"device pass\" in "
750 "your kernel config file\n");
765 cam_module_event_handler(module_t mod, int what, void *arg)
771 if ((error = xpt_init(NULL)) != 0)
783 static struct xpt_proto *
784 xpt_proto_find(cam_proto proto)
786 struct xpt_proto **pp;
788 SET_FOREACH(pp, cam_xpt_proto_set) {
789 if ((*pp)->proto == proto)
797 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
800 if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
801 xpt_free_path(done_ccb->ccb_h.path);
802 xpt_free_ccb(done_ccb);
804 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
805 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
810 /* thread to handle bus rescans */
812 xpt_scanner_thread(void *dummy)
815 struct cam_path path;
819 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
820 msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
822 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
823 TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
827 * Since lock can be dropped inside and path freed
828 * by completion callback even before return here,
829 * take our own path copy for reference.
831 xpt_copy_path(&path, ccb->ccb_h.path);
832 xpt_path_lock(&path);
834 xpt_path_unlock(&path);
835 xpt_release_path(&path);
843 xpt_rescan(union ccb *ccb)
847 /* Prepare request */
848 if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
849 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
850 ccb->ccb_h.func_code = XPT_SCAN_BUS;
851 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
852 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
853 ccb->ccb_h.func_code = XPT_SCAN_TGT;
854 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
855 ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
856 ccb->ccb_h.func_code = XPT_SCAN_LUN;
858 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
859 xpt_free_path(ccb->ccb_h.path);
863 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
864 ("xpt_rescan: func %#x %s\n", ccb->ccb_h.func_code,
865 xpt_action_name(ccb->ccb_h.func_code)));
867 ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
868 ccb->ccb_h.cbfcnp = xpt_rescan_done;
869 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
870 /* Don't make duplicate entries for the same paths. */
872 if (ccb->ccb_h.ppriv_ptr1 == NULL) {
873 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
874 if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
875 wakeup(&xsoftc.ccb_scanq);
877 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
878 xpt_free_path(ccb->ccb_h.path);
884 TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
885 xsoftc.buses_to_config++;
886 wakeup(&xsoftc.ccb_scanq);
890 /* Functions accessed by the peripheral drivers */
892 xpt_init(void *dummy)
894 struct cam_sim *xpt_sim;
895 struct cam_path *path;
896 struct cam_devq *devq;
900 TAILQ_INIT(&xsoftc.xpt_busses);
901 TAILQ_INIT(&xsoftc.ccb_scanq);
902 STAILQ_INIT(&xsoftc.highpowerq);
903 xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
905 mtx_init(&xsoftc.xpt_lock, "XPT lock", NULL, MTX_DEF);
906 mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
907 xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
908 taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
910 #ifdef CAM_BOOT_DELAY
912 * Override this value at compile time to assist our users
913 * who don't use loader to boot a kernel.
915 xsoftc.boot_delay = CAM_BOOT_DELAY;
918 * The xpt layer is, itself, the equivalent of a SIM.
919 * Allow 16 ccbs in the ccb pool for it. This should
920 * give decent parallelism when we probe buses and
921 * perform other XPT functions.
923 devq = cam_simq_alloc(16);
924 xpt_sim = cam_sim_alloc(xptaction,
929 /*mtx*/&xsoftc.xpt_lock,
930 /*max_dev_transactions*/0,
931 /*max_tagged_dev_transactions*/0,
936 mtx_lock(&xsoftc.xpt_lock);
937 if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
938 mtx_unlock(&xsoftc.xpt_lock);
939 printf("xpt_init: xpt_bus_register failed with status %#x,"
940 " failing attach\n", status);
943 mtx_unlock(&xsoftc.xpt_lock);
946 * Looking at the XPT from the SIM layer, the XPT is
947 * the equivalent of a peripheral driver. Allocate
948 * a peripheral driver entry for us.
950 if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
952 CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
953 printf("xpt_init: xpt_create_path failed with status %#x,"
954 " failing attach\n", status);
958 cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
959 path, NULL, 0, xpt_sim);
960 xpt_path_unlock(path);
963 if (cam_num_doneqs < 1)
964 cam_num_doneqs = 1 + mp_ncpus / 6;
965 else if (cam_num_doneqs > MAXCPU)
966 cam_num_doneqs = MAXCPU;
967 for (i = 0; i < cam_num_doneqs; i++) {
968 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
970 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
971 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
972 &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
978 if (cam_num_doneqs < 1) {
979 printf("xpt_init: Cannot init completion queues "
980 "- failing attach\n");
984 * Register a callback for when interrupts are enabled.
986 xsoftc.xpt_config_hook =
987 (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
988 M_CAMXPT, M_NOWAIT | M_ZERO);
989 if (xsoftc.xpt_config_hook == NULL) {
990 printf("xpt_init: Cannot malloc config hook "
991 "- failing attach\n");
994 xsoftc.xpt_config_hook->ich_func = xpt_config;
995 if (config_intrhook_establish(xsoftc.xpt_config_hook) != 0) {
996 free (xsoftc.xpt_config_hook, M_CAMXPT);
997 printf("xpt_init: config_intrhook_establish failed "
998 "- failing attach\n");
1005 xptregister(struct cam_periph *periph, void *arg)
1007 struct cam_sim *xpt_sim;
1009 if (periph == NULL) {
1010 printf("xptregister: periph was NULL!!\n");
1011 return(CAM_REQ_CMP_ERR);
1014 xpt_sim = (struct cam_sim *)arg;
1015 xpt_sim->softc = periph;
1016 xpt_periph = periph;
1017 periph->softc = NULL;
1019 return(CAM_REQ_CMP);
1023 xpt_add_periph(struct cam_periph *periph)
1025 struct cam_ed *device;
1028 TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
1029 device = periph->path->device;
1030 status = CAM_REQ_CMP;
1031 if (device != NULL) {
1032 mtx_lock(&device->target->bus->eb_mtx);
1033 device->generation++;
1034 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
1035 mtx_unlock(&device->target->bus->eb_mtx);
1036 atomic_add_32(&xsoftc.xpt_generation, 1);
1043 xpt_remove_periph(struct cam_periph *periph)
1045 struct cam_ed *device;
1047 device = periph->path->device;
1048 if (device != NULL) {
1049 mtx_lock(&device->target->bus->eb_mtx);
1050 device->generation++;
1051 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
1052 mtx_unlock(&device->target->bus->eb_mtx);
1053 atomic_add_32(&xsoftc.xpt_generation, 1);
1059 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1061 struct cam_path *path = periph->path;
1062 struct xpt_proto *proto;
1064 cam_periph_assert(periph, MA_OWNED);
1065 periph->flags |= CAM_PERIPH_ANNOUNCED;
1067 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1068 periph->periph_name, periph->unit_number,
1069 path->bus->sim->sim_name,
1070 path->bus->sim->unit_number,
1071 path->bus->sim->bus_id,
1073 path->target->target_id,
1074 (uintmax_t)path->device->lun_id);
1075 printf("%s%d: ", periph->periph_name, periph->unit_number);
1076 proto = xpt_proto_find(path->device->protocol);
1078 proto->ops->announce(path->device);
1080 printf("%s%d: Unknown protocol device %d\n",
1081 periph->periph_name, periph->unit_number,
1082 path->device->protocol);
1083 if (path->device->serial_num_len > 0) {
1084 /* Don't wrap the screen - print only the first 60 chars */
1085 printf("%s%d: Serial Number %.60s\n", periph->periph_name,
1086 periph->unit_number, path->device->serial_num);
1088 /* Announce transport details. */
1089 path->bus->xport->ops->announce(periph);
1090 /* Announce command queueing. */
1091 if (path->device->inq_flags & SID_CmdQue
1092 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1093 printf("%s%d: Command Queueing enabled\n",
1094 periph->periph_name, periph->unit_number);
1096 /* Announce caller's details if they've passed in. */
1097 if (announce_string != NULL)
1098 printf("%s%d: %s\n", periph->periph_name,
1099 periph->unit_number, announce_string);
1103 xpt_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb,
1104 char *announce_string)
1106 struct cam_path *path = periph->path;
1107 struct xpt_proto *proto;
1109 cam_periph_assert(periph, MA_OWNED);
1110 periph->flags |= CAM_PERIPH_ANNOUNCED;
1112 /* Fall back to the non-sbuf method if necessary */
1113 if (xsoftc.announce_nosbuf != 0) {
1114 xpt_announce_periph(periph, announce_string);
1117 proto = xpt_proto_find(path->device->protocol);
1118 if (((proto != NULL) && (proto->ops->announce_sbuf == NULL)) ||
1119 (path->bus->xport->ops->announce_sbuf == NULL)) {
1120 xpt_announce_periph(periph, announce_string);
1124 sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1125 periph->periph_name, periph->unit_number,
1126 path->bus->sim->sim_name,
1127 path->bus->sim->unit_number,
1128 path->bus->sim->bus_id,
1130 path->target->target_id,
1131 (uintmax_t)path->device->lun_id);
1132 sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
1135 proto->ops->announce_sbuf(path->device, sb);
1137 sbuf_printf(sb, "%s%d: Unknown protocol device %d\n",
1138 periph->periph_name, periph->unit_number,
1139 path->device->protocol);
1140 if (path->device->serial_num_len > 0) {
1141 /* Don't wrap the screen - print only the first 60 chars */
1142 sbuf_printf(sb, "%s%d: Serial Number %.60s\n",
1143 periph->periph_name, periph->unit_number,
1144 path->device->serial_num);
1146 /* Announce transport details. */
1147 path->bus->xport->ops->announce_sbuf(periph, sb);
1148 /* Announce command queueing. */
1149 if (path->device->inq_flags & SID_CmdQue
1150 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1151 sbuf_printf(sb, "%s%d: Command Queueing enabled\n",
1152 periph->periph_name, periph->unit_number);
1154 /* Announce caller's details if they've passed in. */
1155 if (announce_string != NULL)
1156 sbuf_printf(sb, "%s%d: %s\n", periph->periph_name,
1157 periph->unit_number, announce_string);
1161 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1164 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1165 periph->unit_number, quirks, bit_string);
1170 xpt_announce_quirks_sbuf(struct cam_periph *periph, struct sbuf *sb,
1171 int quirks, char *bit_string)
1173 if (xsoftc.announce_nosbuf != 0) {
1174 xpt_announce_quirks(periph, quirks, bit_string);
1179 sbuf_printf(sb, "%s%d: quirks=0x%b\n", periph->periph_name,
1180 periph->unit_number, quirks, bit_string);
1185 xpt_denounce_periph(struct cam_periph *periph)
1187 struct cam_path *path = periph->path;
1188 struct xpt_proto *proto;
1190 cam_periph_assert(periph, MA_OWNED);
1191 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1192 periph->periph_name, periph->unit_number,
1193 path->bus->sim->sim_name,
1194 path->bus->sim->unit_number,
1195 path->bus->sim->bus_id,
1197 path->target->target_id,
1198 (uintmax_t)path->device->lun_id);
1199 printf("%s%d: ", periph->periph_name, periph->unit_number);
1200 proto = xpt_proto_find(path->device->protocol);
1202 proto->ops->denounce(path->device);
1204 printf("%s%d: Unknown protocol device %d\n",
1205 periph->periph_name, periph->unit_number,
1206 path->device->protocol);
1207 if (path->device->serial_num_len > 0)
1208 printf(" s/n %.60s", path->device->serial_num);
1209 printf(" detached\n");
1213 xpt_denounce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb)
1215 struct cam_path *path = periph->path;
1216 struct xpt_proto *proto;
1218 cam_periph_assert(periph, MA_OWNED);
1220 /* Fall back to the non-sbuf method if necessary */
1221 if (xsoftc.announce_nosbuf != 0) {
1222 xpt_denounce_periph(periph);
1225 proto = xpt_proto_find(path->device->protocol);
1226 if ((proto != NULL) && (proto->ops->denounce_sbuf == NULL)) {
1227 xpt_denounce_periph(periph);
1231 sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1232 periph->periph_name, periph->unit_number,
1233 path->bus->sim->sim_name,
1234 path->bus->sim->unit_number,
1235 path->bus->sim->bus_id,
1237 path->target->target_id,
1238 (uintmax_t)path->device->lun_id);
1239 sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
1242 proto->ops->denounce_sbuf(path->device, sb);
1244 sbuf_printf(sb, "%s%d: Unknown protocol device %d\n",
1245 periph->periph_name, periph->unit_number,
1246 path->device->protocol);
1247 if (path->device->serial_num_len > 0)
1248 sbuf_printf(sb, " s/n %.60s", path->device->serial_num);
1249 sbuf_printf(sb, " detached\n");
1253 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1256 struct ccb_dev_advinfo cdai;
1257 struct scsi_vpd_id_descriptor *idd;
1259 xpt_path_assert(path, MA_OWNED);
1261 memset(&cdai, 0, sizeof(cdai));
1262 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1263 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1264 cdai.flags = CDAI_FLAG_NONE;
1267 if (!strcmp(attr, "GEOM::ident"))
1268 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1269 else if (!strcmp(attr, "GEOM::physpath"))
1270 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1271 else if (strcmp(attr, "GEOM::lunid") == 0 ||
1272 strcmp(attr, "GEOM::lunname") == 0) {
1273 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1274 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1278 cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT|M_ZERO);
1279 if (cdai.buf == NULL) {
1283 xpt_action((union ccb *)&cdai); /* can only be synchronous */
1284 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1285 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1286 if (cdai.provsiz == 0)
1288 if (cdai.buftype == CDAI_TYPE_SCSI_DEVID) {
1289 if (strcmp(attr, "GEOM::lunid") == 0) {
1290 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1291 cdai.provsiz, scsi_devid_is_lun_naa);
1293 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1294 cdai.provsiz, scsi_devid_is_lun_eui64);
1296 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1297 cdai.provsiz, scsi_devid_is_lun_uuid);
1299 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1300 cdai.provsiz, scsi_devid_is_lun_md5);
1304 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1305 cdai.provsiz, scsi_devid_is_lun_t10);
1307 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1308 cdai.provsiz, scsi_devid_is_lun_name);
1312 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII) {
1313 if (idd->length < len) {
1314 for (l = 0; l < idd->length; l++)
1315 buf[l] = idd->identifier[l] ?
1316 idd->identifier[l] : ' ';
1320 } else if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) {
1321 l = strnlen(idd->identifier, idd->length);
1323 bcopy(idd->identifier, buf, l);
1327 } else if ((idd->id_type & SVPD_ID_TYPE_MASK) == SVPD_ID_TYPE_UUID
1328 && idd->identifier[0] == 0x10) {
1329 if ((idd->length - 2) * 2 + 4 < len) {
1330 for (l = 2, o = 0; l < idd->length; l++) {
1331 if (l == 6 || l == 8 || l == 10 || l == 12)
1332 o += sprintf(buf + o, "-");
1333 o += sprintf(buf + o, "%02x",
1334 idd->identifier[l]);
1339 if (idd->length * 2 < len) {
1340 for (l = 0; l < idd->length; l++)
1341 sprintf(buf + l * 2, "%02x",
1342 idd->identifier[l]);
1348 if (strlcpy(buf, cdai.buf, len) >= len)
1353 if (cdai.buf != NULL)
1354 free(cdai.buf, M_CAMXPT);
1358 static dev_match_ret
1359 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1362 dev_match_ret retval;
1365 retval = DM_RET_NONE;
1368 * If we aren't given something to match against, that's an error.
1371 return(DM_RET_ERROR);
1374 * If there are no match entries, then this bus matches no
1377 if ((patterns == NULL) || (num_patterns == 0))
1378 return(DM_RET_DESCEND | DM_RET_COPY);
1380 for (i = 0; i < num_patterns; i++) {
1381 struct bus_match_pattern *cur_pattern;
1384 * If the pattern in question isn't for a bus node, we
1385 * aren't interested. However, we do indicate to the
1386 * calling routine that we should continue descending the
1387 * tree, since the user wants to match against lower-level
1390 if (patterns[i].type != DEV_MATCH_BUS) {
1391 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1392 retval |= DM_RET_DESCEND;
1396 cur_pattern = &patterns[i].pattern.bus_pattern;
1399 * If they want to match any bus node, we give them any
1402 if (cur_pattern->flags == BUS_MATCH_ANY) {
1403 /* set the copy flag */
1404 retval |= DM_RET_COPY;
1407 * If we've already decided on an action, go ahead
1410 if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
1415 * Not sure why someone would do this...
1417 if (cur_pattern->flags == BUS_MATCH_NONE)
1420 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1421 && (cur_pattern->path_id != bus->path_id))
1424 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1425 && (cur_pattern->bus_id != bus->sim->bus_id))
1428 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1429 && (cur_pattern->unit_number != bus->sim->unit_number))
1432 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1433 && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1438 * If we get to this point, the user definitely wants
1439 * information on this bus. So tell the caller to copy the
1442 retval |= DM_RET_COPY;
1445 * If the return action has been set to descend, then we
1446 * know that we've already seen a non-bus matching
1447 * expression, therefore we need to further descend the tree.
1448 * This won't change by continuing around the loop, so we
1449 * go ahead and return. If we haven't seen a non-bus
1450 * matching expression, we keep going around the loop until
1451 * we exhaust the matching expressions. We'll set the stop
1452 * flag once we fall out of the loop.
1454 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1459 * If the return action hasn't been set to descend yet, that means
1460 * we haven't seen anything other than bus matching patterns. So
1461 * tell the caller to stop descending the tree -- the user doesn't
1462 * want to match against lower level tree elements.
1464 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1465 retval |= DM_RET_STOP;
1470 static dev_match_ret
1471 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1472 struct cam_ed *device)
1474 dev_match_ret retval;
1477 retval = DM_RET_NONE;
1480 * If we aren't given something to match against, that's an error.
1483 return(DM_RET_ERROR);
1486 * If there are no match entries, then this device matches no
1489 if ((patterns == NULL) || (num_patterns == 0))
1490 return(DM_RET_DESCEND | DM_RET_COPY);
1492 for (i = 0; i < num_patterns; i++) {
1493 struct device_match_pattern *cur_pattern;
1494 struct scsi_vpd_device_id *device_id_page;
1497 * If the pattern in question isn't for a device node, we
1498 * aren't interested.
1500 if (patterns[i].type != DEV_MATCH_DEVICE) {
1501 if ((patterns[i].type == DEV_MATCH_PERIPH)
1502 && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1503 retval |= DM_RET_DESCEND;
1507 cur_pattern = &patterns[i].pattern.device_pattern;
1509 /* Error out if mutually exclusive options are specified. */
1510 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1511 == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1512 return(DM_RET_ERROR);
1515 * If they want to match any device node, we give them any
1518 if (cur_pattern->flags == DEV_MATCH_ANY)
1522 * Not sure why someone would do this...
1524 if (cur_pattern->flags == DEV_MATCH_NONE)
1527 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1528 && (cur_pattern->path_id != device->target->bus->path_id))
1531 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1532 && (cur_pattern->target_id != device->target->target_id))
1535 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1536 && (cur_pattern->target_lun != device->lun_id))
1539 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1540 && (cam_quirkmatch((caddr_t)&device->inq_data,
1541 (caddr_t)&cur_pattern->data.inq_pat,
1542 1, sizeof(cur_pattern->data.inq_pat),
1543 scsi_static_inquiry_match) == NULL))
1546 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1547 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1548 && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1549 || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1550 device->device_id_len
1551 - SVPD_DEVICE_ID_HDR_LEN,
1552 cur_pattern->data.devid_pat.id,
1553 cur_pattern->data.devid_pat.id_len) != 0))
1558 * If we get to this point, the user definitely wants
1559 * information on this device. So tell the caller to copy
1562 retval |= DM_RET_COPY;
1565 * If the return action has been set to descend, then we
1566 * know that we've already seen a peripheral matching
1567 * expression, therefore we need to further descend the tree.
1568 * This won't change by continuing around the loop, so we
1569 * go ahead and return. If we haven't seen a peripheral
1570 * matching expression, we keep going around the loop until
1571 * we exhaust the matching expressions. We'll set the stop
1572 * flag once we fall out of the loop.
1574 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1579 * If the return action hasn't been set to descend yet, that means
1580 * we haven't seen any peripheral matching patterns. So tell the
1581 * caller to stop descending the tree -- the user doesn't want to
1582 * match against lower level tree elements.
1584 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1585 retval |= DM_RET_STOP;
1591 * Match a single peripheral against any number of match patterns.
1593 static dev_match_ret
1594 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1595 struct cam_periph *periph)
1597 dev_match_ret retval;
1601 * If we aren't given something to match against, that's an error.
1604 return(DM_RET_ERROR);
1607 * If there are no match entries, then this peripheral matches no
1610 if ((patterns == NULL) || (num_patterns == 0))
1611 return(DM_RET_STOP | DM_RET_COPY);
1614 * There aren't any nodes below a peripheral node, so there's no
1615 * reason to descend the tree any further.
1617 retval = DM_RET_STOP;
1619 for (i = 0; i < num_patterns; i++) {
1620 struct periph_match_pattern *cur_pattern;
1623 * If the pattern in question isn't for a peripheral, we
1624 * aren't interested.
1626 if (patterns[i].type != DEV_MATCH_PERIPH)
1629 cur_pattern = &patterns[i].pattern.periph_pattern;
1632 * If they want to match on anything, then we will do so.
1634 if (cur_pattern->flags == PERIPH_MATCH_ANY) {
1635 /* set the copy flag */
1636 retval |= DM_RET_COPY;
1639 * We've already set the return action to stop,
1640 * since there are no nodes below peripherals in
1647 * Not sure why someone would do this...
1649 if (cur_pattern->flags == PERIPH_MATCH_NONE)
1652 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1653 && (cur_pattern->path_id != periph->path->bus->path_id))
1657 * For the target and lun id's, we have to make sure the
1658 * target and lun pointers aren't NULL. The xpt peripheral
1659 * has a wildcard target and device.
1661 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1662 && ((periph->path->target == NULL)
1663 ||(cur_pattern->target_id != periph->path->target->target_id)))
1666 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1667 && ((periph->path->device == NULL)
1668 || (cur_pattern->target_lun != periph->path->device->lun_id)))
1671 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1672 && (cur_pattern->unit_number != periph->unit_number))
1675 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1676 && (strncmp(cur_pattern->periph_name, periph->periph_name,
1681 * If we get to this point, the user definitely wants
1682 * information on this peripheral. So tell the caller to
1683 * copy the data out.
1685 retval |= DM_RET_COPY;
1688 * The return action has already been set to stop, since
1689 * peripherals don't have any nodes below them in the EDT.
1695 * If we get to this point, the peripheral that was passed in
1696 * doesn't match any of the patterns.
1702 xptedtbusfunc(struct cam_eb *bus, void *arg)
1704 struct ccb_dev_match *cdm;
1705 struct cam_et *target;
1706 dev_match_ret retval;
1708 cdm = (struct ccb_dev_match *)arg;
1711 * If our position is for something deeper in the tree, that means
1712 * that we've already seen this node. So, we keep going down.
1714 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1715 && (cdm->pos.cookie.bus == bus)
1716 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1717 && (cdm->pos.cookie.target != NULL))
1718 retval = DM_RET_DESCEND;
1720 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1723 * If we got an error, bail out of the search.
1725 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1726 cdm->status = CAM_DEV_MATCH_ERROR;
1731 * If the copy flag is set, copy this bus out.
1733 if (retval & DM_RET_COPY) {
1736 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1737 sizeof(struct dev_match_result));
1740 * If we don't have enough space to put in another
1741 * match result, save our position and tell the
1742 * user there are more devices to check.
1744 if (spaceleft < sizeof(struct dev_match_result)) {
1745 bzero(&cdm->pos, sizeof(cdm->pos));
1746 cdm->pos.position_type =
1747 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1749 cdm->pos.cookie.bus = bus;
1750 cdm->pos.generations[CAM_BUS_GENERATION]=
1751 xsoftc.bus_generation;
1752 cdm->status = CAM_DEV_MATCH_MORE;
1755 j = cdm->num_matches;
1757 cdm->matches[j].type = DEV_MATCH_BUS;
1758 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1759 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1760 cdm->matches[j].result.bus_result.unit_number =
1761 bus->sim->unit_number;
1762 strlcpy(cdm->matches[j].result.bus_result.dev_name,
1764 sizeof(cdm->matches[j].result.bus_result.dev_name));
1768 * If the user is only interested in buses, there's no
1769 * reason to descend to the next level in the tree.
1771 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1775 * If there is a target generation recorded, check it to
1776 * make sure the target list hasn't changed.
1778 mtx_lock(&bus->eb_mtx);
1779 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1780 && (cdm->pos.cookie.bus == bus)
1781 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1782 && (cdm->pos.cookie.target != NULL)) {
1783 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1785 mtx_unlock(&bus->eb_mtx);
1786 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1789 target = (struct cam_et *)cdm->pos.cookie.target;
1793 mtx_unlock(&bus->eb_mtx);
1795 return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1799 xptedttargetfunc(struct cam_et *target, void *arg)
1801 struct ccb_dev_match *cdm;
1803 struct cam_ed *device;
1805 cdm = (struct ccb_dev_match *)arg;
1809 * If there is a device list generation recorded, check it to
1810 * make sure the device list hasn't changed.
1812 mtx_lock(&bus->eb_mtx);
1813 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1814 && (cdm->pos.cookie.bus == bus)
1815 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1816 && (cdm->pos.cookie.target == target)
1817 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1818 && (cdm->pos.cookie.device != NULL)) {
1819 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1820 target->generation) {
1821 mtx_unlock(&bus->eb_mtx);
1822 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1825 device = (struct cam_ed *)cdm->pos.cookie.device;
1829 mtx_unlock(&bus->eb_mtx);
1831 return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1835 xptedtdevicefunc(struct cam_ed *device, void *arg)
1838 struct cam_periph *periph;
1839 struct ccb_dev_match *cdm;
1840 dev_match_ret retval;
1842 cdm = (struct ccb_dev_match *)arg;
1843 bus = device->target->bus;
1846 * If our position is for something deeper in the tree, that means
1847 * that we've already seen this node. So, we keep going down.
1849 if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1850 && (cdm->pos.cookie.device == device)
1851 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1852 && (cdm->pos.cookie.periph != NULL))
1853 retval = DM_RET_DESCEND;
1855 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1858 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1859 cdm->status = CAM_DEV_MATCH_ERROR;
1864 * If the copy flag is set, copy this device out.
1866 if (retval & DM_RET_COPY) {
1869 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1870 sizeof(struct dev_match_result));
1873 * If we don't have enough space to put in another
1874 * match result, save our position and tell the
1875 * user there are more devices to check.
1877 if (spaceleft < sizeof(struct dev_match_result)) {
1878 bzero(&cdm->pos, sizeof(cdm->pos));
1879 cdm->pos.position_type =
1880 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1881 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1883 cdm->pos.cookie.bus = device->target->bus;
1884 cdm->pos.generations[CAM_BUS_GENERATION]=
1885 xsoftc.bus_generation;
1886 cdm->pos.cookie.target = device->target;
1887 cdm->pos.generations[CAM_TARGET_GENERATION] =
1888 device->target->bus->generation;
1889 cdm->pos.cookie.device = device;
1890 cdm->pos.generations[CAM_DEV_GENERATION] =
1891 device->target->generation;
1892 cdm->status = CAM_DEV_MATCH_MORE;
1895 j = cdm->num_matches;
1897 cdm->matches[j].type = DEV_MATCH_DEVICE;
1898 cdm->matches[j].result.device_result.path_id =
1899 device->target->bus->path_id;
1900 cdm->matches[j].result.device_result.target_id =
1901 device->target->target_id;
1902 cdm->matches[j].result.device_result.target_lun =
1904 cdm->matches[j].result.device_result.protocol =
1906 bcopy(&device->inq_data,
1907 &cdm->matches[j].result.device_result.inq_data,
1908 sizeof(struct scsi_inquiry_data));
1909 bcopy(&device->ident_data,
1910 &cdm->matches[j].result.device_result.ident_data,
1911 sizeof(struct ata_params));
1912 bcopy(&device->mmc_ident_data,
1913 &cdm->matches[j].result.device_result.mmc_ident_data,
1914 sizeof(struct mmc_params));
1916 /* Let the user know whether this device is unconfigured */
1917 if (device->flags & CAM_DEV_UNCONFIGURED)
1918 cdm->matches[j].result.device_result.flags =
1919 DEV_RESULT_UNCONFIGURED;
1921 cdm->matches[j].result.device_result.flags =
1926 * If the user isn't interested in peripherals, don't descend
1927 * the tree any further.
1929 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1933 * If there is a peripheral list generation recorded, make sure
1934 * it hasn't changed.
1937 mtx_lock(&bus->eb_mtx);
1938 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1939 && (cdm->pos.cookie.bus == bus)
1940 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1941 && (cdm->pos.cookie.target == device->target)
1942 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1943 && (cdm->pos.cookie.device == device)
1944 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1945 && (cdm->pos.cookie.periph != NULL)) {
1946 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1947 device->generation) {
1948 mtx_unlock(&bus->eb_mtx);
1950 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1953 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1957 mtx_unlock(&bus->eb_mtx);
1960 return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1964 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1966 struct ccb_dev_match *cdm;
1967 dev_match_ret retval;
1969 cdm = (struct ccb_dev_match *)arg;
1971 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1973 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1974 cdm->status = CAM_DEV_MATCH_ERROR;
1979 * If the copy flag is set, copy this peripheral out.
1981 if (retval & DM_RET_COPY) {
1985 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1986 sizeof(struct dev_match_result));
1989 * If we don't have enough space to put in another
1990 * match result, save our position and tell the
1991 * user there are more devices to check.
1993 if (spaceleft < sizeof(struct dev_match_result)) {
1994 bzero(&cdm->pos, sizeof(cdm->pos));
1995 cdm->pos.position_type =
1996 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1997 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
2000 cdm->pos.cookie.bus = periph->path->bus;
2001 cdm->pos.generations[CAM_BUS_GENERATION]=
2002 xsoftc.bus_generation;
2003 cdm->pos.cookie.target = periph->path->target;
2004 cdm->pos.generations[CAM_TARGET_GENERATION] =
2005 periph->path->bus->generation;
2006 cdm->pos.cookie.device = periph->path->device;
2007 cdm->pos.generations[CAM_DEV_GENERATION] =
2008 periph->path->target->generation;
2009 cdm->pos.cookie.periph = periph;
2010 cdm->pos.generations[CAM_PERIPH_GENERATION] =
2011 periph->path->device->generation;
2012 cdm->status = CAM_DEV_MATCH_MORE;
2016 j = cdm->num_matches;
2018 cdm->matches[j].type = DEV_MATCH_PERIPH;
2019 cdm->matches[j].result.periph_result.path_id =
2020 periph->path->bus->path_id;
2021 cdm->matches[j].result.periph_result.target_id =
2022 periph->path->target->target_id;
2023 cdm->matches[j].result.periph_result.target_lun =
2024 periph->path->device->lun_id;
2025 cdm->matches[j].result.periph_result.unit_number =
2026 periph->unit_number;
2027 l = sizeof(cdm->matches[j].result.periph_result.periph_name);
2028 strlcpy(cdm->matches[j].result.periph_result.periph_name,
2029 periph->periph_name, l);
2036 xptedtmatch(struct ccb_dev_match *cdm)
2041 cdm->num_matches = 0;
2044 * Check the bus list generation. If it has changed, the user
2045 * needs to reset everything and start over.
2048 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
2049 && (cdm->pos.cookie.bus != NULL)) {
2050 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
2051 xsoftc.bus_generation) {
2053 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
2056 bus = (struct cam_eb *)cdm->pos.cookie.bus;
2062 ret = xptbustraverse(bus, xptedtbusfunc, cdm);
2065 * If we get back 0, that means that we had to stop before fully
2066 * traversing the EDT. It also means that one of the subroutines
2067 * has set the status field to the proper value. If we get back 1,
2068 * we've fully traversed the EDT and copied out any matching entries.
2071 cdm->status = CAM_DEV_MATCH_LAST;
2077 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
2079 struct cam_periph *periph;
2080 struct ccb_dev_match *cdm;
2082 cdm = (struct ccb_dev_match *)arg;
2085 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2086 && (cdm->pos.cookie.pdrv == pdrv)
2087 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
2088 && (cdm->pos.cookie.periph != NULL)) {
2089 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
2090 (*pdrv)->generation) {
2092 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
2095 periph = (struct cam_periph *)cdm->pos.cookie.periph;
2101 return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
2105 xptplistperiphfunc(struct cam_periph *periph, void *arg)
2107 struct ccb_dev_match *cdm;
2108 dev_match_ret retval;
2110 cdm = (struct ccb_dev_match *)arg;
2112 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
2114 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
2115 cdm->status = CAM_DEV_MATCH_ERROR;
2120 * If the copy flag is set, copy this peripheral out.
2122 if (retval & DM_RET_COPY) {
2126 spaceleft = cdm->match_buf_len - (cdm->num_matches *
2127 sizeof(struct dev_match_result));
2130 * If we don't have enough space to put in another
2131 * match result, save our position and tell the
2132 * user there are more devices to check.
2134 if (spaceleft < sizeof(struct dev_match_result)) {
2135 struct periph_driver **pdrv;
2138 bzero(&cdm->pos, sizeof(cdm->pos));
2139 cdm->pos.position_type =
2140 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
2144 * This may look a bit non-sensical, but it is
2145 * actually quite logical. There are very few
2146 * peripheral drivers, and bloating every peripheral
2147 * structure with a pointer back to its parent
2148 * peripheral driver linker set entry would cost
2149 * more in the long run than doing this quick lookup.
2151 for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
2152 if (strcmp((*pdrv)->driver_name,
2153 periph->periph_name) == 0)
2157 if (*pdrv == NULL) {
2158 cdm->status = CAM_DEV_MATCH_ERROR;
2162 cdm->pos.cookie.pdrv = pdrv;
2164 * The periph generation slot does double duty, as
2165 * does the periph pointer slot. They are used for
2166 * both edt and pdrv lookups and positioning.
2168 cdm->pos.cookie.periph = periph;
2169 cdm->pos.generations[CAM_PERIPH_GENERATION] =
2170 (*pdrv)->generation;
2171 cdm->status = CAM_DEV_MATCH_MORE;
2175 j = cdm->num_matches;
2177 cdm->matches[j].type = DEV_MATCH_PERIPH;
2178 cdm->matches[j].result.periph_result.path_id =
2179 periph->path->bus->path_id;
2182 * The transport layer peripheral doesn't have a target or
2185 if (periph->path->target)
2186 cdm->matches[j].result.periph_result.target_id =
2187 periph->path->target->target_id;
2189 cdm->matches[j].result.periph_result.target_id =
2190 CAM_TARGET_WILDCARD;
2192 if (periph->path->device)
2193 cdm->matches[j].result.periph_result.target_lun =
2194 periph->path->device->lun_id;
2196 cdm->matches[j].result.periph_result.target_lun =
2199 cdm->matches[j].result.periph_result.unit_number =
2200 periph->unit_number;
2201 l = sizeof(cdm->matches[j].result.periph_result.periph_name);
2202 strlcpy(cdm->matches[j].result.periph_result.periph_name,
2203 periph->periph_name, l);
2210 xptperiphlistmatch(struct ccb_dev_match *cdm)
2214 cdm->num_matches = 0;
2217 * At this point in the edt traversal function, we check the bus
2218 * list generation to make sure that no buses have been added or
2219 * removed since the user last sent a XPT_DEV_MATCH ccb through.
2220 * For the peripheral driver list traversal function, however, we
2221 * don't have to worry about new peripheral driver types coming or
2222 * going; they're in a linker set, and therefore can't change
2223 * without a recompile.
2226 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2227 && (cdm->pos.cookie.pdrv != NULL))
2228 ret = xptpdrvtraverse(
2229 (struct periph_driver **)cdm->pos.cookie.pdrv,
2230 xptplistpdrvfunc, cdm);
2232 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2235 * If we get back 0, that means that we had to stop before fully
2236 * traversing the peripheral driver tree. It also means that one of
2237 * the subroutines has set the status field to the proper value. If
2238 * we get back 1, we've fully traversed the EDT and copied out any
2242 cdm->status = CAM_DEV_MATCH_LAST;
2248 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2250 struct cam_eb *bus, *next_bus;
2258 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2266 for (; bus != NULL; bus = next_bus) {
2267 retval = tr_func(bus, arg);
2269 xpt_release_bus(bus);
2273 next_bus = TAILQ_NEXT(bus, links);
2275 next_bus->refcount++;
2277 xpt_release_bus(bus);
2283 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2284 xpt_targetfunc_t *tr_func, void *arg)
2286 struct cam_et *target, *next_target;
2291 target = start_target;
2293 mtx_lock(&bus->eb_mtx);
2294 target = TAILQ_FIRST(&bus->et_entries);
2295 if (target == NULL) {
2296 mtx_unlock(&bus->eb_mtx);
2300 mtx_unlock(&bus->eb_mtx);
2302 for (; target != NULL; target = next_target) {
2303 retval = tr_func(target, arg);
2305 xpt_release_target(target);
2308 mtx_lock(&bus->eb_mtx);
2309 next_target = TAILQ_NEXT(target, links);
2311 next_target->refcount++;
2312 mtx_unlock(&bus->eb_mtx);
2313 xpt_release_target(target);
2319 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2320 xpt_devicefunc_t *tr_func, void *arg)
2323 struct cam_ed *device, *next_device;
2329 device = start_device;
2331 mtx_lock(&bus->eb_mtx);
2332 device = TAILQ_FIRST(&target->ed_entries);
2333 if (device == NULL) {
2334 mtx_unlock(&bus->eb_mtx);
2338 mtx_unlock(&bus->eb_mtx);
2340 for (; device != NULL; device = next_device) {
2341 mtx_lock(&device->device_mtx);
2342 retval = tr_func(device, arg);
2343 mtx_unlock(&device->device_mtx);
2345 xpt_release_device(device);
2348 mtx_lock(&bus->eb_mtx);
2349 next_device = TAILQ_NEXT(device, links);
2351 next_device->refcount++;
2352 mtx_unlock(&bus->eb_mtx);
2353 xpt_release_device(device);
2359 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2360 xpt_periphfunc_t *tr_func, void *arg)
2363 struct cam_periph *periph, *next_periph;
2368 bus = device->target->bus;
2370 periph = start_periph;
2373 mtx_lock(&bus->eb_mtx);
2374 periph = SLIST_FIRST(&device->periphs);
2375 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2376 periph = SLIST_NEXT(periph, periph_links);
2377 if (periph == NULL) {
2378 mtx_unlock(&bus->eb_mtx);
2383 mtx_unlock(&bus->eb_mtx);
2386 for (; periph != NULL; periph = next_periph) {
2387 retval = tr_func(periph, arg);
2389 cam_periph_release_locked(periph);
2393 mtx_lock(&bus->eb_mtx);
2394 next_periph = SLIST_NEXT(periph, periph_links);
2395 while (next_periph != NULL &&
2396 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2397 next_periph = SLIST_NEXT(next_periph, periph_links);
2399 next_periph->refcount++;
2400 mtx_unlock(&bus->eb_mtx);
2402 cam_periph_release_locked(periph);
2408 xptpdrvtraverse(struct periph_driver **start_pdrv,
2409 xpt_pdrvfunc_t *tr_func, void *arg)
2411 struct periph_driver **pdrv;
2417 * We don't traverse the peripheral driver list like we do the
2418 * other lists, because it is a linker set, and therefore cannot be
2419 * changed during runtime. If the peripheral driver list is ever
2420 * re-done to be something other than a linker set (i.e. it can
2421 * change while the system is running), the list traversal should
2422 * be modified to work like the other traversal functions.
2424 for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2425 *pdrv != NULL; pdrv++) {
2426 retval = tr_func(pdrv, arg);
2436 xptpdperiphtraverse(struct periph_driver **pdrv,
2437 struct cam_periph *start_periph,
2438 xpt_periphfunc_t *tr_func, void *arg)
2440 struct cam_periph *periph, *next_periph;
2446 periph = start_periph;
2449 periph = TAILQ_FIRST(&(*pdrv)->units);
2450 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2451 periph = TAILQ_NEXT(periph, unit_links);
2452 if (periph == NULL) {
2459 for (; periph != NULL; periph = next_periph) {
2460 cam_periph_lock(periph);
2461 retval = tr_func(periph, arg);
2462 cam_periph_unlock(periph);
2464 cam_periph_release(periph);
2468 next_periph = TAILQ_NEXT(periph, unit_links);
2469 while (next_periph != NULL &&
2470 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2471 next_periph = TAILQ_NEXT(next_periph, unit_links);
2473 next_periph->refcount++;
2475 cam_periph_release(periph);
2481 xptdefbusfunc(struct cam_eb *bus, void *arg)
2483 struct xpt_traverse_config *tr_config;
2485 tr_config = (struct xpt_traverse_config *)arg;
2487 if (tr_config->depth == XPT_DEPTH_BUS) {
2488 xpt_busfunc_t *tr_func;
2490 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2492 return(tr_func(bus, tr_config->tr_arg));
2494 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2498 xptdeftargetfunc(struct cam_et *target, void *arg)
2500 struct xpt_traverse_config *tr_config;
2502 tr_config = (struct xpt_traverse_config *)arg;
2504 if (tr_config->depth == XPT_DEPTH_TARGET) {
2505 xpt_targetfunc_t *tr_func;
2507 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2509 return(tr_func(target, tr_config->tr_arg));
2511 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2515 xptdefdevicefunc(struct cam_ed *device, void *arg)
2517 struct xpt_traverse_config *tr_config;
2519 tr_config = (struct xpt_traverse_config *)arg;
2521 if (tr_config->depth == XPT_DEPTH_DEVICE) {
2522 xpt_devicefunc_t *tr_func;
2524 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2526 return(tr_func(device, tr_config->tr_arg));
2528 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2532 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2534 struct xpt_traverse_config *tr_config;
2535 xpt_periphfunc_t *tr_func;
2537 tr_config = (struct xpt_traverse_config *)arg;
2539 tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2542 * Unlike the other default functions, we don't check for depth
2543 * here. The peripheral driver level is the last level in the EDT,
2544 * so if we're here, we should execute the function in question.
2546 return(tr_func(periph, tr_config->tr_arg));
2550 * Execute the given function for every bus in the EDT.
2553 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2555 struct xpt_traverse_config tr_config;
2557 tr_config.depth = XPT_DEPTH_BUS;
2558 tr_config.tr_func = tr_func;
2559 tr_config.tr_arg = arg;
2561 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2565 * Execute the given function for every device in the EDT.
2568 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2570 struct xpt_traverse_config tr_config;
2572 tr_config.depth = XPT_DEPTH_DEVICE;
2573 tr_config.tr_func = tr_func;
2574 tr_config.tr_arg = arg;
2576 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2580 xptsetasyncfunc(struct cam_ed *device, void *arg)
2582 struct cam_path path;
2583 struct ccb_getdev cgd;
2584 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2587 * Don't report unconfigured devices (Wildcard devs,
2588 * devices only for target mode, device instances
2589 * that have been invalidated but are waiting for
2590 * their last reference count to be released).
2592 if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2595 xpt_compile_path(&path,
2597 device->target->bus->path_id,
2598 device->target->target_id,
2600 xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2601 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2602 xpt_action((union ccb *)&cgd);
2603 csa->callback(csa->callback_arg,
2606 xpt_release_path(&path);
2612 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2614 struct cam_path path;
2615 struct ccb_pathinq cpi;
2616 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2618 xpt_compile_path(&path, /*periph*/NULL,
2620 CAM_TARGET_WILDCARD,
2622 xpt_path_lock(&path);
2623 xpt_path_inq(&cpi, &path);
2624 csa->callback(csa->callback_arg,
2627 xpt_path_unlock(&path);
2628 xpt_release_path(&path);
2634 xpt_action(union ccb *start_ccb)
2637 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
2638 ("xpt_action: func %#x %s\n", start_ccb->ccb_h.func_code,
2639 xpt_action_name(start_ccb->ccb_h.func_code)));
2641 start_ccb->ccb_h.status = CAM_REQ_INPROG;
2642 (*(start_ccb->ccb_h.path->bus->xport->ops->action))(start_ccb);
2646 xpt_action_default(union ccb *start_ccb)
2648 struct cam_path *path;
2649 struct cam_sim *sim;
2652 path = start_ccb->ccb_h.path;
2653 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2654 ("xpt_action_default: func %#x %s\n", start_ccb->ccb_h.func_code,
2655 xpt_action_name(start_ccb->ccb_h.func_code)));
2657 switch (start_ccb->ccb_h.func_code) {
2660 struct cam_ed *device;
2663 * For the sake of compatibility with SCSI-1
2664 * devices that may not understand the identify
2665 * message, we include lun information in the
2666 * second byte of all commands. SCSI-1 specifies
2667 * that luns are a 3 bit value and reserves only 3
2668 * bits for lun information in the CDB. Later
2669 * revisions of the SCSI spec allow for more than 8
2670 * luns, but have deprecated lun information in the
2671 * CDB. So, if the lun won't fit, we must omit.
2673 * Also be aware that during initial probing for devices,
2674 * the inquiry information is unknown but initialized to 0.
2675 * This means that this code will be exercised while probing
2676 * devices with an ANSI revision greater than 2.
2678 device = path->device;
2679 if (device->protocol_version <= SCSI_REV_2
2680 && start_ccb->ccb_h.target_lun < 8
2681 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2683 start_ccb->csio.cdb_io.cdb_bytes[1] |=
2684 start_ccb->ccb_h.target_lun << 5;
2686 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2690 case XPT_CONT_TARGET_IO:
2691 start_ccb->csio.sense_resid = 0;
2692 start_ccb->csio.resid = 0;
2695 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2696 start_ccb->ataio.resid = 0;
2700 case XPT_NVME_ADMIN:
2703 /* XXX just like nmve_io? */
2708 struct cam_devq *devq;
2710 devq = path->bus->sim->devq;
2711 mtx_lock(&devq->send_mtx);
2712 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2713 if (xpt_schedule_devq(devq, path->device) != 0)
2715 mtx_unlock(&devq->send_mtx);
2718 case XPT_CALC_GEOMETRY:
2719 /* Filter out garbage */
2720 if (start_ccb->ccg.block_size == 0
2721 || start_ccb->ccg.volume_size == 0) {
2722 start_ccb->ccg.cylinders = 0;
2723 start_ccb->ccg.heads = 0;
2724 start_ccb->ccg.secs_per_track = 0;
2725 start_ccb->ccb_h.status = CAM_REQ_CMP;
2728 #if defined(__sparc64__)
2730 * For sparc64, we may need adjust the geometry of large
2731 * disks in order to fit the limitations of the 16-bit
2732 * fields of the VTOC8 disk label.
2734 if (scsi_da_bios_params(&start_ccb->ccg) != 0) {
2735 start_ccb->ccb_h.status = CAM_REQ_CMP;
2742 union ccb* abort_ccb;
2744 abort_ccb = start_ccb->cab.abort_ccb;
2745 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2746 struct cam_ed *device;
2747 struct cam_devq *devq;
2749 device = abort_ccb->ccb_h.path->device;
2750 devq = device->sim->devq;
2752 mtx_lock(&devq->send_mtx);
2753 if (abort_ccb->ccb_h.pinfo.index > 0) {
2754 cam_ccbq_remove_ccb(&device->ccbq, abort_ccb);
2755 abort_ccb->ccb_h.status =
2756 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2757 xpt_freeze_devq_device(device, 1);
2758 mtx_unlock(&devq->send_mtx);
2759 xpt_done(abort_ccb);
2760 start_ccb->ccb_h.status = CAM_REQ_CMP;
2763 mtx_unlock(&devq->send_mtx);
2765 if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2766 && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2768 * We've caught this ccb en route to
2769 * the SIM. Flag it for abort and the
2770 * SIM will do so just before starting
2771 * real work on the CCB.
2773 abort_ccb->ccb_h.status =
2774 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2775 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2776 start_ccb->ccb_h.status = CAM_REQ_CMP;
2780 if (XPT_FC_IS_QUEUED(abort_ccb)
2781 && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2783 * It's already completed but waiting
2784 * for our SWI to get to it.
2786 start_ccb->ccb_h.status = CAM_UA_ABORT;
2790 * If we weren't able to take care of the abort request
2791 * in the XPT, pass the request down to the SIM for processing.
2795 case XPT_ACCEPT_TARGET_IO:
2797 case XPT_IMMED_NOTIFY:
2798 case XPT_NOTIFY_ACK:
2800 case XPT_IMMEDIATE_NOTIFY:
2801 case XPT_NOTIFY_ACKNOWLEDGE:
2802 case XPT_GET_SIM_KNOB_OLD:
2803 case XPT_GET_SIM_KNOB:
2804 case XPT_SET_SIM_KNOB:
2805 case XPT_GET_TRAN_SETTINGS:
2806 case XPT_SET_TRAN_SETTINGS:
2809 sim = path->bus->sim;
2811 if (mtx && !mtx_owned(mtx))
2816 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2817 ("Calling sim->sim_action(): func=%#x\n", start_ccb->ccb_h.func_code));
2818 (*(sim->sim_action))(sim, start_ccb);
2819 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2820 ("sim->sim_action returned: status=%#x\n", start_ccb->ccb_h.status));
2824 case XPT_PATH_STATS:
2825 start_ccb->cpis.last_reset = path->bus->last_reset;
2826 start_ccb->ccb_h.status = CAM_REQ_CMP;
2833 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2834 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2836 struct ccb_getdev *cgd;
2838 cgd = &start_ccb->cgd;
2839 cgd->protocol = dev->protocol;
2840 cgd->inq_data = dev->inq_data;
2841 cgd->ident_data = dev->ident_data;
2842 cgd->inq_flags = dev->inq_flags;
2843 cgd->ccb_h.status = CAM_REQ_CMP;
2844 cgd->serial_num_len = dev->serial_num_len;
2845 if ((dev->serial_num_len > 0)
2846 && (dev->serial_num != NULL))
2847 bcopy(dev->serial_num, cgd->serial_num,
2848 dev->serial_num_len);
2852 case XPT_GDEV_STATS:
2854 struct ccb_getdevstats *cgds = &start_ccb->cgds;
2855 struct cam_ed *dev = path->device;
2856 struct cam_eb *bus = path->bus;
2857 struct cam_et *tar = path->target;
2858 struct cam_devq *devq = bus->sim->devq;
2860 mtx_lock(&devq->send_mtx);
2861 cgds->dev_openings = dev->ccbq.dev_openings;
2862 cgds->dev_active = dev->ccbq.dev_active;
2863 cgds->allocated = dev->ccbq.allocated;
2864 cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2865 cgds->held = cgds->allocated - cgds->dev_active - cgds->queued;
2866 cgds->last_reset = tar->last_reset;
2867 cgds->maxtags = dev->maxtags;
2868 cgds->mintags = dev->mintags;
2869 if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2870 cgds->last_reset = bus->last_reset;
2871 mtx_unlock(&devq->send_mtx);
2872 cgds->ccb_h.status = CAM_REQ_CMP;
2877 struct cam_periph *nperiph;
2878 struct periph_list *periph_head;
2879 struct ccb_getdevlist *cgdl;
2881 struct cam_ed *device;
2888 * Don't want anyone mucking with our data.
2890 device = path->device;
2891 periph_head = &device->periphs;
2892 cgdl = &start_ccb->cgdl;
2895 * Check and see if the list has changed since the user
2896 * last requested a list member. If so, tell them that the
2897 * list has changed, and therefore they need to start over
2898 * from the beginning.
2900 if ((cgdl->index != 0) &&
2901 (cgdl->generation != device->generation)) {
2902 cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2907 * Traverse the list of peripherals and attempt to find
2908 * the requested peripheral.
2910 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2911 (nperiph != NULL) && (i <= cgdl->index);
2912 nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2913 if (i == cgdl->index) {
2914 strlcpy(cgdl->periph_name,
2915 nperiph->periph_name,
2916 sizeof(cgdl->periph_name));
2917 cgdl->unit_number = nperiph->unit_number;
2922 cgdl->status = CAM_GDEVLIST_ERROR;
2926 if (nperiph == NULL)
2927 cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2929 cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2932 cgdl->generation = device->generation;
2934 cgdl->ccb_h.status = CAM_REQ_CMP;
2939 dev_pos_type position_type;
2940 struct ccb_dev_match *cdm;
2942 cdm = &start_ccb->cdm;
2945 * There are two ways of getting at information in the EDT.
2946 * The first way is via the primary EDT tree. It starts
2947 * with a list of buses, then a list of targets on a bus,
2948 * then devices/luns on a target, and then peripherals on a
2949 * device/lun. The "other" way is by the peripheral driver
2950 * lists. The peripheral driver lists are organized by
2951 * peripheral driver. (obviously) So it makes sense to
2952 * use the peripheral driver list if the user is looking
2953 * for something like "da1", or all "da" devices. If the
2954 * user is looking for something on a particular bus/target
2955 * or lun, it's generally better to go through the EDT tree.
2958 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2959 position_type = cdm->pos.position_type;
2963 position_type = CAM_DEV_POS_NONE;
2965 for (i = 0; i < cdm->num_patterns; i++) {
2966 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2967 ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2968 position_type = CAM_DEV_POS_EDT;
2973 if (cdm->num_patterns == 0)
2974 position_type = CAM_DEV_POS_EDT;
2975 else if (position_type == CAM_DEV_POS_NONE)
2976 position_type = CAM_DEV_POS_PDRV;
2979 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2980 case CAM_DEV_POS_EDT:
2983 case CAM_DEV_POS_PDRV:
2984 xptperiphlistmatch(cdm);
2987 cdm->status = CAM_DEV_MATCH_ERROR;
2991 if (cdm->status == CAM_DEV_MATCH_ERROR)
2992 start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2994 start_ccb->ccb_h.status = CAM_REQ_CMP;
3000 struct ccb_setasync *csa;
3001 struct async_node *cur_entry;
3002 struct async_list *async_head;
3005 csa = &start_ccb->csa;
3006 added = csa->event_enable;
3007 async_head = &path->device->asyncs;
3010 * If there is already an entry for us, simply
3013 cur_entry = SLIST_FIRST(async_head);
3014 while (cur_entry != NULL) {
3015 if ((cur_entry->callback_arg == csa->callback_arg)
3016 && (cur_entry->callback == csa->callback))
3018 cur_entry = SLIST_NEXT(cur_entry, links);
3021 if (cur_entry != NULL) {
3023 * If the request has no flags set,
3026 added &= ~cur_entry->event_enable;
3027 if (csa->event_enable == 0) {
3028 SLIST_REMOVE(async_head, cur_entry,
3030 xpt_release_device(path->device);
3031 free(cur_entry, M_CAMXPT);
3033 cur_entry->event_enable = csa->event_enable;
3035 csa->event_enable = added;
3037 cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
3039 if (cur_entry == NULL) {
3040 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
3043 cur_entry->event_enable = csa->event_enable;
3044 cur_entry->event_lock = (path->bus->sim->mtx &&
3045 mtx_owned(path->bus->sim->mtx)) ? 1 : 0;
3046 cur_entry->callback_arg = csa->callback_arg;
3047 cur_entry->callback = csa->callback;
3048 SLIST_INSERT_HEAD(async_head, cur_entry, links);
3049 xpt_acquire_device(path->device);
3051 start_ccb->ccb_h.status = CAM_REQ_CMP;
3056 struct ccb_relsim *crs;
3059 crs = &start_ccb->crs;
3063 crs->ccb_h.status = CAM_DEV_NOT_THERE;
3067 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
3069 /* Don't ever go below one opening */
3070 if (crs->openings > 0) {
3071 xpt_dev_ccbq_resize(path, crs->openings);
3074 "number of openings is now %d\n",
3080 mtx_lock(&dev->sim->devq->send_mtx);
3081 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
3083 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
3086 * Just extend the old timeout and decrement
3087 * the freeze count so that a single timeout
3088 * is sufficient for releasing the queue.
3090 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
3091 callout_stop(&dev->callout);
3094 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
3097 callout_reset_sbt(&dev->callout,
3098 SBT_1MS * crs->release_timeout, 0,
3099 xpt_release_devq_timeout, dev, 0);
3101 dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
3105 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
3107 if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
3109 * Decrement the freeze count so that a single
3110 * completion is still sufficient to unfreeze
3113 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
3116 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
3117 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
3121 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
3123 if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
3124 || (dev->ccbq.dev_active == 0)) {
3126 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
3129 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
3130 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
3133 mtx_unlock(&dev->sim->devq->send_mtx);
3135 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
3136 xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
3137 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
3138 start_ccb->ccb_h.status = CAM_REQ_CMP;
3142 struct cam_path *oldpath;
3144 /* Check that all request bits are supported. */
3145 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
3146 start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
3150 cam_dflags = CAM_DEBUG_NONE;
3151 if (cam_dpath != NULL) {
3152 oldpath = cam_dpath;
3154 xpt_free_path(oldpath);
3156 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
3157 if (xpt_create_path(&cam_dpath, NULL,
3158 start_ccb->ccb_h.path_id,
3159 start_ccb->ccb_h.target_id,
3160 start_ccb->ccb_h.target_lun) !=
3162 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3164 cam_dflags = start_ccb->cdbg.flags;
3165 start_ccb->ccb_h.status = CAM_REQ_CMP;
3166 xpt_print(cam_dpath, "debugging flags now %x\n",
3170 start_ccb->ccb_h.status = CAM_REQ_CMP;
3174 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
3175 xpt_freeze_devq(path, 1);
3176 start_ccb->ccb_h.status = CAM_REQ_CMP;
3178 case XPT_REPROBE_LUN:
3179 xpt_async(AC_INQ_CHANGED, path, NULL);
3180 start_ccb->ccb_h.status = CAM_REQ_CMP;
3181 xpt_done(start_ccb);
3188 xpt_print(start_ccb->ccb_h.path,
3189 "%s: CCB type %#x %s not supported\n", __func__,
3190 start_ccb->ccb_h.func_code,
3191 xpt_action_name(start_ccb->ccb_h.func_code));
3192 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
3193 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
3194 xpt_done(start_ccb);
3198 CAM_DEBUG(path, CAM_DEBUG_TRACE,
3199 ("xpt_action_default: func= %#x %s status %#x\n",
3200 start_ccb->ccb_h.func_code,
3201 xpt_action_name(start_ccb->ccb_h.func_code),
3202 start_ccb->ccb_h.status));
3206 xpt_poll_setup(union ccb *start_ccb)
3209 struct cam_sim *sim;
3210 struct cam_devq *devq;
3214 timeout = start_ccb->ccb_h.timeout * 10;
3215 sim = start_ccb->ccb_h.path->bus->sim;
3218 dev = start_ccb->ccb_h.path->device;
3221 * Steal an opening so that no other queued requests
3222 * can get it before us while we simulate interrupts.
3224 mtx_lock(&devq->send_mtx);
3225 dev->ccbq.dev_openings--;
3226 while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3228 mtx_unlock(&devq->send_mtx);
3232 (*(sim->sim_poll))(sim);
3236 mtx_lock(&devq->send_mtx);
3238 dev->ccbq.dev_openings++;
3239 mtx_unlock(&devq->send_mtx);
3245 xpt_pollwait(union ccb *start_ccb, uint32_t timeout)
3247 struct cam_sim *sim;
3250 sim = start_ccb->ccb_h.path->bus->sim;
3253 while (--timeout > 0) {
3256 (*(sim->sim_poll))(sim);
3260 if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
3268 * XXX Is it worth adding a sim_timeout entry
3269 * point so we can attempt recovery? If
3270 * this is only used for dumps, I don't think
3273 start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3278 xpt_polled_action(union ccb *start_ccb)
3283 timeout = start_ccb->ccb_h.timeout * 10;
3284 dev = start_ccb->ccb_h.path->device;
3286 mtx_unlock(&dev->device_mtx);
3288 timeout = xpt_poll_setup(start_ccb);
3290 xpt_action(start_ccb);
3291 xpt_pollwait(start_ccb, timeout);
3293 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3296 mtx_lock(&dev->device_mtx);
3300 * Schedule a peripheral driver to receive a ccb when its
3301 * target device has space for more transactions.
3304 xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
3307 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3308 cam_periph_assert(periph, MA_OWNED);
3309 if (new_priority < periph->scheduled_priority) {
3310 periph->scheduled_priority = new_priority;
3311 xpt_run_allocq(periph, 0);
3317 * Schedule a device to run on a given queue.
3318 * If the device was inserted as a new entry on the queue,
3319 * return 1 meaning the device queue should be run. If we
3320 * were already queued, implying someone else has already
3321 * started the queue, return 0 so the caller doesn't attempt
3325 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3326 u_int32_t new_priority)
3329 u_int32_t old_priority;
3331 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3334 old_priority = pinfo->priority;
3337 * Are we already queued?
3339 if (pinfo->index != CAM_UNQUEUED_INDEX) {
3340 /* Simply reorder based on new priority */
3341 if (new_priority < old_priority) {
3342 camq_change_priority(queue, pinfo->index,
3344 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3345 ("changed priority to %d\n",
3351 /* New entry on the queue */
3352 if (new_priority < old_priority)
3353 pinfo->priority = new_priority;
3355 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3356 ("Inserting onto queue\n"));
3357 pinfo->generation = ++queue->generation;
3358 camq_insert(queue, pinfo);
3365 xpt_run_allocq_task(void *context, int pending)
3367 struct cam_periph *periph = context;
3369 cam_periph_lock(periph);
3370 periph->flags &= ~CAM_PERIPH_RUN_TASK;
3371 xpt_run_allocq(periph, 1);
3372 cam_periph_unlock(periph);
3373 cam_periph_release(periph);
3377 xpt_run_allocq(struct cam_periph *periph, int sleep)
3379 struct cam_ed *device;
3383 cam_periph_assert(periph, MA_OWNED);
3384 if (periph->periph_allocating)
3386 periph->periph_allocating = 1;
3387 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3388 device = periph->path->device;
3391 while ((prio = min(periph->scheduled_priority,
3392 periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3393 (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3394 device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3397 (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3399 ccb = xpt_get_ccb(periph);
3402 if (periph->flags & CAM_PERIPH_RUN_TASK)
3404 cam_periph_doacquire(periph);
3405 periph->flags |= CAM_PERIPH_RUN_TASK;
3406 taskqueue_enqueue(xsoftc.xpt_taskq,
3407 &periph->periph_run_task);
3410 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3411 if (prio == periph->immediate_priority) {
3412 periph->immediate_priority = CAM_PRIORITY_NONE;
3413 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3414 ("waking cam_periph_getccb()\n"));
3415 SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3417 wakeup(&periph->ccb_list);
3419 periph->scheduled_priority = CAM_PRIORITY_NONE;
3420 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3421 ("calling periph_start()\n"));
3422 periph->periph_start(periph, ccb);
3427 xpt_release_ccb(ccb);
3428 periph->periph_allocating = 0;
3432 xpt_run_devq(struct cam_devq *devq)
3436 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3438 devq->send_queue.qfrozen_cnt++;
3439 while ((devq->send_queue.entries > 0)
3440 && (devq->send_openings > 0)
3441 && (devq->send_queue.qfrozen_cnt <= 1)) {
3442 struct cam_ed *device;
3443 union ccb *work_ccb;
3444 struct cam_sim *sim;
3445 struct xpt_proto *proto;
3447 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3449 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3450 ("running device %p\n", device));
3452 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3453 if (work_ccb == NULL) {
3454 printf("device on run queue with no ccbs???\n");
3458 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3460 mtx_lock(&xsoftc.xpt_highpower_lock);
3461 if (xsoftc.num_highpower <= 0) {
3463 * We got a high power command, but we
3464 * don't have any available slots. Freeze
3465 * the device queue until we have a slot
3468 xpt_freeze_devq_device(device, 1);
3469 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3472 mtx_unlock(&xsoftc.xpt_highpower_lock);
3476 * Consume a high power slot while
3479 xsoftc.num_highpower--;
3481 mtx_unlock(&xsoftc.xpt_highpower_lock);
3483 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3484 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3485 devq->send_openings--;
3486 devq->send_active++;
3487 xpt_schedule_devq(devq, device);
3488 mtx_unlock(&devq->send_mtx);
3490 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3492 * The client wants to freeze the queue
3493 * after this CCB is sent.
3495 xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3498 /* In Target mode, the peripheral driver knows best... */
3499 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3500 if ((device->inq_flags & SID_CmdQue) != 0
3501 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3502 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3505 * Clear this in case of a retried CCB that
3506 * failed due to a rejected tag.
3508 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3511 KASSERT(device == work_ccb->ccb_h.path->device,
3512 ("device (%p) / path->device (%p) mismatch",
3513 device, work_ccb->ccb_h.path->device));
3514 proto = xpt_proto_find(device->protocol);
3515 if (proto && proto->ops->debug_out)
3516 proto->ops->debug_out(work_ccb);
3519 * Device queues can be shared among multiple SIM instances
3520 * that reside on different buses. Use the SIM from the
3521 * queued device, rather than the one from the calling bus.
3525 if (mtx && !mtx_owned(mtx))
3529 work_ccb->ccb_h.qos.periph_data = cam_iosched_now();
3530 (*(sim->sim_action))(sim, work_ccb);
3533 mtx_lock(&devq->send_mtx);
3535 devq->send_queue.qfrozen_cnt--;
3539 * This function merges stuff from the slave ccb into the master ccb, while
3540 * keeping important fields in the master ccb constant.
3543 xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb)
3547 * Pull fields that are valid for peripheral drivers to set
3548 * into the master CCB along with the CCB "payload".
3550 master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count;
3551 master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code;
3552 master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout;
3553 master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags;
3554 bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1],
3555 sizeof(union ccb) - sizeof(struct ccb_hdr));
3559 xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path,
3560 u_int32_t priority, u_int32_t flags)
3563 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3564 ccb_h->pinfo.priority = priority;
3566 ccb_h->path_id = path->bus->path_id;
3568 ccb_h->target_id = path->target->target_id;
3570 ccb_h->target_id = CAM_TARGET_WILDCARD;
3572 ccb_h->target_lun = path->device->lun_id;
3573 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3575 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3577 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3578 ccb_h->flags = flags;
3583 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
3585 xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0);
3588 /* Path manipulation functions */
3590 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3591 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3593 struct cam_path *path;
3596 path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3599 status = CAM_RESRC_UNAVAIL;
3602 status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3603 if (status != CAM_REQ_CMP) {
3604 free(path, M_CAMPATH);
3607 *new_path_ptr = path;
3612 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3613 struct cam_periph *periph, path_id_t path_id,
3614 target_id_t target_id, lun_id_t lun_id)
3617 return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3622 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3623 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3626 struct cam_et *target;
3627 struct cam_ed *device;
3630 status = CAM_REQ_CMP; /* Completed without error */
3631 target = NULL; /* Wildcarded */
3632 device = NULL; /* Wildcarded */
3635 * We will potentially modify the EDT, so block interrupts
3636 * that may attempt to create cam paths.
3638 bus = xpt_find_bus(path_id);
3640 status = CAM_PATH_INVALID;
3643 mtx_lock(&bus->eb_mtx);
3644 target = xpt_find_target(bus, target_id);
3645 if (target == NULL) {
3647 struct cam_et *new_target;
3649 new_target = xpt_alloc_target(bus, target_id);
3650 if (new_target == NULL) {
3651 status = CAM_RESRC_UNAVAIL;
3653 target = new_target;
3657 if (target != NULL) {
3658 device = xpt_find_device(target, lun_id);
3659 if (device == NULL) {
3661 struct cam_ed *new_device;
3664 (*(bus->xport->ops->alloc_device))(bus,
3667 if (new_device == NULL) {
3668 status = CAM_RESRC_UNAVAIL;
3670 device = new_device;
3674 mtx_unlock(&bus->eb_mtx);
3678 * Only touch the user's data if we are successful.
3680 if (status == CAM_REQ_CMP) {
3681 new_path->periph = perph;
3682 new_path->bus = bus;
3683 new_path->target = target;
3684 new_path->device = device;
3685 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3688 xpt_release_device(device);
3690 xpt_release_target(target);
3692 xpt_release_bus(bus);
3698 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3700 struct cam_path *new_path;
3702 new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3703 if (new_path == NULL)
3704 return(CAM_RESRC_UNAVAIL);
3705 xpt_copy_path(new_path, path);
3706 *new_path_ptr = new_path;
3707 return (CAM_REQ_CMP);
3711 xpt_copy_path(struct cam_path *new_path, struct cam_path *path)
3715 if (path->bus != NULL)
3716 xpt_acquire_bus(path->bus);
3717 if (path->target != NULL)
3718 xpt_acquire_target(path->target);
3719 if (path->device != NULL)
3720 xpt_acquire_device(path->device);
3724 xpt_release_path(struct cam_path *path)
3726 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3727 if (path->device != NULL) {
3728 xpt_release_device(path->device);
3729 path->device = NULL;
3731 if (path->target != NULL) {
3732 xpt_release_target(path->target);
3733 path->target = NULL;
3735 if (path->bus != NULL) {
3736 xpt_release_bus(path->bus);
3742 xpt_free_path(struct cam_path *path)
3745 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3746 xpt_release_path(path);
3747 free(path, M_CAMPATH);
3751 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3752 uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3758 *bus_ref = path->bus->refcount;
3764 *periph_ref = path->periph->refcount;
3771 *target_ref = path->target->refcount;
3777 *device_ref = path->device->refcount;
3784 * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3785 * in path1, 2 for match with wildcards in path2.
3788 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3792 if (path1->bus != path2->bus) {
3793 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3795 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3800 if (path1->target != path2->target) {
3801 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3804 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3809 if (path1->device != path2->device) {
3810 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3813 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3822 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3826 if (path->bus != dev->target->bus) {
3827 if (path->bus->path_id == CAM_BUS_WILDCARD)
3829 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3834 if (path->target != dev->target) {
3835 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3838 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3843 if (path->device != dev) {
3844 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3847 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3856 xpt_print_path(struct cam_path *path)
3859 char buffer[XPT_PRINT_LEN];
3861 sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
3862 xpt_path_sbuf(path, &sb);
3864 printf("%s", sbuf_data(&sb));
3869 xpt_print_device(struct cam_ed *device)
3873 printf("(nopath): ");
3875 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3876 device->sim->unit_number,
3877 device->sim->bus_id,
3878 device->target->target_id,
3879 (uintmax_t)device->lun_id);
3884 xpt_print(struct cam_path *path, const char *fmt, ...)
3888 char buffer[XPT_PRINT_LEN];
3890 sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
3892 xpt_path_sbuf(path, &sb);
3894 sbuf_vprintf(&sb, fmt, ap);
3898 printf("%s", sbuf_data(&sb));
3903 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3908 sbuf_new(&sb, str, str_len, 0);
3909 len = xpt_path_sbuf(path, &sb);
3915 xpt_path_sbuf(struct cam_path *path, struct sbuf *sb)
3919 sbuf_printf(sb, "(nopath): ");
3921 if (path->periph != NULL)
3922 sbuf_printf(sb, "(%s%d:", path->periph->periph_name,
3923 path->periph->unit_number);
3925 sbuf_printf(sb, "(noperiph:");
3927 if (path->bus != NULL)
3928 sbuf_printf(sb, "%s%d:%d:", path->bus->sim->sim_name,
3929 path->bus->sim->unit_number,
3930 path->bus->sim->bus_id);
3932 sbuf_printf(sb, "nobus:");
3934 if (path->target != NULL)
3935 sbuf_printf(sb, "%d:", path->target->target_id);
3937 sbuf_printf(sb, "X:");
3939 if (path->device != NULL)
3940 sbuf_printf(sb, "%jx): ",
3941 (uintmax_t)path->device->lun_id);
3943 sbuf_printf(sb, "X): ");
3946 return(sbuf_len(sb));
3950 xpt_path_path_id(struct cam_path *path)
3952 return(path->bus->path_id);
3956 xpt_path_target_id(struct cam_path *path)
3958 if (path->target != NULL)
3959 return (path->target->target_id);
3961 return (CAM_TARGET_WILDCARD);
3965 xpt_path_lun_id(struct cam_path *path)
3967 if (path->device != NULL)
3968 return (path->device->lun_id);
3970 return (CAM_LUN_WILDCARD);
3974 xpt_path_sim(struct cam_path *path)
3977 return (path->bus->sim);
3981 xpt_path_periph(struct cam_path *path)
3984 return (path->periph);
3988 * Release a CAM control block for the caller. Remit the cost of the structure
3989 * to the device referenced by the path. If the this device had no 'credits'
3990 * and peripheral drivers have registered async callbacks for this notification
3994 xpt_release_ccb(union ccb *free_ccb)
3996 struct cam_ed *device;
3997 struct cam_periph *periph;
3999 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
4000 xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
4001 device = free_ccb->ccb_h.path->device;
4002 periph = free_ccb->ccb_h.path->periph;
4004 xpt_free_ccb(free_ccb);
4005 periph->periph_allocated--;
4006 cam_ccbq_release_opening(&device->ccbq);
4007 xpt_run_allocq(periph, 0);
4010 /* Functions accessed by SIM drivers */
4012 static struct xpt_xport_ops xport_default_ops = {
4013 .alloc_device = xpt_alloc_device_default,
4014 .action = xpt_action_default,
4015 .async = xpt_dev_async_default,
4017 static struct xpt_xport xport_default = {
4018 .xport = XPORT_UNKNOWN,
4020 .ops = &xport_default_ops,
4023 CAM_XPT_XPORT(xport_default);
4026 * A sim structure, listing the SIM entry points and instance
4027 * identification info is passed to xpt_bus_register to hook the SIM
4028 * into the CAM framework. xpt_bus_register creates a cam_eb entry
4029 * for this new bus and places it in the array of buses and assigns
4030 * it a path_id. The path_id may be influenced by "hard wiring"
4031 * information specified by the user. Once interrupt services are
4032 * available, the bus will be probed.
4035 xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
4037 struct cam_eb *new_bus;
4038 struct cam_eb *old_bus;
4039 struct ccb_pathinq cpi;
4040 struct cam_path *path;
4044 new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
4045 M_CAMXPT, M_NOWAIT|M_ZERO);
4046 if (new_bus == NULL) {
4047 /* Couldn't satisfy request */
4048 return (CAM_RESRC_UNAVAIL);
4051 mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
4052 TAILQ_INIT(&new_bus->et_entries);
4055 timevalclear(&new_bus->last_reset);
4057 new_bus->refcount = 1; /* Held until a bus_deregister event */
4058 new_bus->generation = 0;
4061 sim->path_id = new_bus->path_id =
4062 xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
4063 old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4064 while (old_bus != NULL
4065 && old_bus->path_id < new_bus->path_id)
4066 old_bus = TAILQ_NEXT(old_bus, links);
4067 if (old_bus != NULL)
4068 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
4070 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
4071 xsoftc.bus_generation++;
4075 * Set a default transport so that a PATH_INQ can be issued to
4076 * the SIM. This will then allow for probing and attaching of
4077 * a more appropriate transport.
4079 new_bus->xport = &xport_default;
4081 status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
4082 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
4083 if (status != CAM_REQ_CMP) {
4084 xpt_release_bus(new_bus);
4085 return (CAM_RESRC_UNAVAIL);
4088 xpt_path_inq(&cpi, path);
4090 if (cpi.ccb_h.status == CAM_REQ_CMP) {
4091 struct xpt_xport **xpt;
4093 SET_FOREACH(xpt, cam_xpt_xport_set) {
4094 if ((*xpt)->xport == cpi.transport) {
4095 new_bus->xport = *xpt;
4099 if (new_bus->xport == NULL) {
4101 "No transport found for %d\n", cpi.transport);
4102 xpt_release_bus(new_bus);
4103 free(path, M_CAMXPT);
4104 return (CAM_RESRC_UNAVAIL);
4108 /* Notify interested parties */
4109 if (sim->path_id != CAM_XPT_PATH_ID) {
4111 xpt_async(AC_PATH_REGISTERED, path, &cpi);
4112 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
4113 union ccb *scan_ccb;
4115 /* Initiate bus rescan. */
4116 scan_ccb = xpt_alloc_ccb_nowait();
4117 if (scan_ccb != NULL) {
4118 scan_ccb->ccb_h.path = path;
4119 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
4120 scan_ccb->crcn.flags = 0;
4121 xpt_rescan(scan_ccb);
4124 "Can't allocate CCB to scan bus\n");
4125 xpt_free_path(path);
4128 xpt_free_path(path);
4130 xpt_free_path(path);
4131 return (CAM_SUCCESS);
4135 xpt_bus_deregister(path_id_t pathid)
4137 struct cam_path bus_path;
4140 status = xpt_compile_path(&bus_path, NULL, pathid,
4141 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
4142 if (status != CAM_REQ_CMP)
4145 xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
4146 xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
4148 /* Release the reference count held while registered. */
4149 xpt_release_bus(bus_path.bus);
4150 xpt_release_path(&bus_path);
4152 return (CAM_REQ_CMP);
4156 xptnextfreepathid(void)
4162 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4164 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4166 /* Find an unoccupied pathid */
4167 while (bus != NULL && bus->path_id <= pathid) {
4168 if (bus->path_id == pathid)
4170 bus = TAILQ_NEXT(bus, links);
4174 * Ensure that this pathid is not reserved for
4175 * a bus that may be registered in the future.
4177 if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
4179 /* Start the search over */
4186 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
4193 pathid = CAM_XPT_PATH_ID;
4194 snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
4195 if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
4198 while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
4199 if (strcmp(dname, "scbus")) {
4200 /* Avoid a bit of foot shooting. */
4203 if (dunit < 0) /* unwired?! */
4205 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
4206 if (sim_bus == val) {
4210 } else if (sim_bus == 0) {
4211 /* Unspecified matches bus 0 */
4215 printf("Ambiguous scbus configuration for %s%d "
4216 "bus %d, cannot wire down. The kernel "
4217 "config entry for scbus%d should "
4218 "specify a controller bus.\n"
4219 "Scbus will be assigned dynamically.\n",
4220 sim_name, sim_unit, sim_bus, dunit);
4225 if (pathid == CAM_XPT_PATH_ID)
4226 pathid = xptnextfreepathid();
4231 xpt_async_string(u_int32_t async_code)
4234 switch (async_code) {
4235 case AC_BUS_RESET: return ("AC_BUS_RESET");
4236 case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4237 case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4238 case AC_SENT_BDR: return ("AC_SENT_BDR");
4239 case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4240 case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4241 case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4242 case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4243 case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4244 case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4245 case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4246 case AC_CONTRACT: return ("AC_CONTRACT");
4247 case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4248 case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4250 return ("AC_UNKNOWN");
4254 xpt_async_size(u_int32_t async_code)
4257 switch (async_code) {
4258 case AC_BUS_RESET: return (0);
4259 case AC_UNSOL_RESEL: return (0);
4260 case AC_SCSI_AEN: return (0);
4261 case AC_SENT_BDR: return (0);
4262 case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4263 case AC_PATH_DEREGISTERED: return (0);
4264 case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4265 case AC_LOST_DEVICE: return (0);
4266 case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4267 case AC_INQ_CHANGED: return (0);
4268 case AC_GETDEV_CHANGED: return (0);
4269 case AC_CONTRACT: return (sizeof(struct ac_contract));
4270 case AC_ADVINFO_CHANGED: return (-1);
4271 case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4277 xpt_async_process_dev(struct cam_ed *device, void *arg)
4279 union ccb *ccb = arg;
4280 struct cam_path *path = ccb->ccb_h.path;
4281 void *async_arg = ccb->casync.async_arg_ptr;
4282 u_int32_t async_code = ccb->casync.async_code;
4285 if (path->device != device
4286 && path->device->lun_id != CAM_LUN_WILDCARD
4287 && device->lun_id != CAM_LUN_WILDCARD)
4291 * The async callback could free the device.
4292 * If it is a broadcast async, it doesn't hold
4293 * device reference, so take our own reference.
4295 xpt_acquire_device(device);
4298 * If async for specific device is to be delivered to
4299 * the wildcard client, take the specific device lock.
4300 * XXX: We may need a way for client to specify it.
4302 if ((device->lun_id == CAM_LUN_WILDCARD &&
4303 path->device->lun_id != CAM_LUN_WILDCARD) ||
4304 (device->target->target_id == CAM_TARGET_WILDCARD &&
4305 path->target->target_id != CAM_TARGET_WILDCARD) ||
4306 (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4307 path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4308 mtx_unlock(&device->device_mtx);
4309 xpt_path_lock(path);
4314 (*(device->target->bus->xport->ops->async))(async_code,
4315 device->target->bus, device->target, device, async_arg);
4316 xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4319 xpt_path_unlock(path);
4320 mtx_lock(&device->device_mtx);
4322 xpt_release_device(device);
4327 xpt_async_process_tgt(struct cam_et *target, void *arg)
4329 union ccb *ccb = arg;
4330 struct cam_path *path = ccb->ccb_h.path;
4332 if (path->target != target
4333 && path->target->target_id != CAM_TARGET_WILDCARD
4334 && target->target_id != CAM_TARGET_WILDCARD)
4337 if (ccb->casync.async_code == AC_SENT_BDR) {
4338 /* Update our notion of when the last reset occurred */
4339 microtime(&target->last_reset);
4342 return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4346 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4349 struct cam_path *path;
4351 u_int32_t async_code;
4353 path = ccb->ccb_h.path;
4354 async_code = ccb->casync.async_code;
4355 async_arg = ccb->casync.async_arg_ptr;
4356 CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4357 ("xpt_async(%s)\n", xpt_async_string(async_code)));
4360 if (async_code == AC_BUS_RESET) {
4361 /* Update our notion of when the last reset occurred */
4362 microtime(&bus->last_reset);
4365 xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4368 * If this wasn't a fully wildcarded async, tell all
4369 * clients that want all async events.
4371 if (bus != xpt_periph->path->bus) {
4372 xpt_path_lock(xpt_periph->path);
4373 xpt_async_process_dev(xpt_periph->path->device, ccb);
4374 xpt_path_unlock(xpt_periph->path);
4377 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4378 xpt_release_devq(path, 1, TRUE);
4380 xpt_release_simq(path->bus->sim, TRUE);
4381 if (ccb->casync.async_arg_size > 0)
4382 free(async_arg, M_CAMXPT);
4383 xpt_free_path(path);
4388 xpt_async_bcast(struct async_list *async_head,
4389 u_int32_t async_code,
4390 struct cam_path *path, void *async_arg)
4392 struct async_node *cur_entry;
4395 cur_entry = SLIST_FIRST(async_head);
4396 while (cur_entry != NULL) {
4397 struct async_node *next_entry;
4399 * Grab the next list entry before we call the current
4400 * entry's callback. This is because the callback function
4401 * can delete its async callback entry.
4403 next_entry = SLIST_NEXT(cur_entry, links);
4404 if ((cur_entry->event_enable & async_code) != 0) {
4405 mtx = cur_entry->event_lock ?
4406 path->device->sim->mtx : NULL;
4409 cur_entry->callback(cur_entry->callback_arg,
4415 cur_entry = next_entry;
4420 xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
4425 ccb = xpt_alloc_ccb_nowait();
4427 xpt_print(path, "Can't allocate CCB to send %s\n",
4428 xpt_async_string(async_code));
4432 if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
4433 xpt_print(path, "Can't allocate path to send %s\n",
4434 xpt_async_string(async_code));
4438 ccb->ccb_h.path->periph = NULL;
4439 ccb->ccb_h.func_code = XPT_ASYNC;
4440 ccb->ccb_h.cbfcnp = xpt_async_process;
4441 ccb->ccb_h.flags |= CAM_UNLOCKED;
4442 ccb->casync.async_code = async_code;
4443 ccb->casync.async_arg_size = 0;
4444 size = xpt_async_size(async_code);
4445 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
4446 ("xpt_async: func %#x %s aync_code %d %s\n",
4447 ccb->ccb_h.func_code,
4448 xpt_action_name(ccb->ccb_h.func_code),
4450 xpt_async_string(async_code)));
4451 if (size > 0 && async_arg != NULL) {
4452 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4453 if (ccb->casync.async_arg_ptr == NULL) {
4454 xpt_print(path, "Can't allocate argument to send %s\n",
4455 xpt_async_string(async_code));
4456 xpt_free_path(ccb->ccb_h.path);
4460 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4461 ccb->casync.async_arg_size = size;
4462 } else if (size < 0) {
4463 ccb->casync.async_arg_ptr = async_arg;
4464 ccb->casync.async_arg_size = size;
4466 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4467 xpt_freeze_devq(path, 1);
4469 xpt_freeze_simq(path->bus->sim, 1);
4474 xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
4475 struct cam_et *target, struct cam_ed *device,
4480 * We only need to handle events for real devices.
4482 if (target->target_id == CAM_TARGET_WILDCARD
4483 || device->lun_id == CAM_LUN_WILDCARD)
4486 printf("%s called\n", __func__);
4490 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4492 struct cam_devq *devq;
4495 devq = dev->sim->devq;
4496 mtx_assert(&devq->send_mtx, MA_OWNED);
4497 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4498 ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4499 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4500 freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4501 /* Remove frozen device from sendq. */
4502 if (device_is_queued(dev))
4503 camq_remove(&devq->send_queue, dev->devq_entry.index);
4508 xpt_freeze_devq(struct cam_path *path, u_int count)
4510 struct cam_ed *dev = path->device;
4511 struct cam_devq *devq;
4514 devq = dev->sim->devq;
4515 mtx_lock(&devq->send_mtx);
4516 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4517 freeze = xpt_freeze_devq_device(dev, count);
4518 mtx_unlock(&devq->send_mtx);
4523 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4525 struct cam_devq *devq;
4529 mtx_lock(&devq->send_mtx);
4530 freeze = (devq->send_queue.qfrozen_cnt += count);
4531 mtx_unlock(&devq->send_mtx);
4536 xpt_release_devq_timeout(void *arg)
4539 struct cam_devq *devq;
4541 dev = (struct cam_ed *)arg;
4542 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4543 devq = dev->sim->devq;
4544 mtx_assert(&devq->send_mtx, MA_OWNED);
4545 if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4550 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4553 struct cam_devq *devq;
4555 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4558 devq = dev->sim->devq;
4559 mtx_lock(&devq->send_mtx);
4560 if (xpt_release_devq_device(dev, count, run_queue))
4561 xpt_run_devq(dev->sim->devq);
4562 mtx_unlock(&devq->send_mtx);
4566 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4569 mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4570 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4571 ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4572 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4573 if (count > dev->ccbq.queue.qfrozen_cnt) {
4575 printf("xpt_release_devq(): requested %u > present %u\n",
4576 count, dev->ccbq.queue.qfrozen_cnt);
4578 count = dev->ccbq.queue.qfrozen_cnt;
4580 dev->ccbq.queue.qfrozen_cnt -= count;
4581 if (dev->ccbq.queue.qfrozen_cnt == 0) {
4583 * No longer need to wait for a successful
4584 * command completion.
4586 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4588 * Remove any timeouts that might be scheduled
4589 * to release this queue.
4591 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4592 callout_stop(&dev->callout);
4593 dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4596 * Now that we are unfrozen schedule the
4597 * device so any pending transactions are
4600 xpt_schedule_devq(dev->sim->devq, dev);
4607 xpt_release_simq(struct cam_sim *sim, int run_queue)
4609 struct cam_devq *devq;
4612 mtx_lock(&devq->send_mtx);
4613 if (devq->send_queue.qfrozen_cnt <= 0) {
4615 printf("xpt_release_simq: requested 1 > present %u\n",
4616 devq->send_queue.qfrozen_cnt);
4619 devq->send_queue.qfrozen_cnt--;
4620 if (devq->send_queue.qfrozen_cnt == 0) {
4622 * If there is a timeout scheduled to release this
4623 * sim queue, remove it. The queue frozen count is
4626 if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
4627 callout_stop(&sim->callout);
4628 sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
4632 * Now that we are unfrozen run the send queue.
4634 xpt_run_devq(sim->devq);
4637 mtx_unlock(&devq->send_mtx);
4641 * XXX Appears to be unused.
4644 xpt_release_simq_timeout(void *arg)
4646 struct cam_sim *sim;
4648 sim = (struct cam_sim *)arg;
4649 xpt_release_simq(sim, /* run_queue */ TRUE);
4653 xpt_done(union ccb *done_ccb)
4655 struct cam_doneq *queue;
4658 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
4659 if (done_ccb->ccb_h.func_code == XPT_SCSI_IO &&
4660 done_ccb->csio.bio != NULL)
4661 biotrack(done_ccb->csio.bio, __func__);
4664 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
4665 ("xpt_done: func= %#x %s status %#x\n",
4666 done_ccb->ccb_h.func_code,
4667 xpt_action_name(done_ccb->ccb_h.func_code),
4668 done_ccb->ccb_h.status));
4669 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4672 /* Store the time the ccb was in the sim */
4673 done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
4674 hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4675 done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4676 queue = &cam_doneqs[hash];
4677 mtx_lock(&queue->cam_doneq_mtx);
4678 run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4679 STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4680 done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4681 mtx_unlock(&queue->cam_doneq_mtx);
4683 wakeup(&queue->cam_doneq);
4687 xpt_done_direct(union ccb *done_ccb)
4690 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
4691 ("xpt_done_direct: status %#x\n", done_ccb->ccb_h.status));
4692 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4695 /* Store the time the ccb was in the sim */
4696 done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
4697 xpt_done_process(&done_ccb->ccb_h);
4705 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4710 xpt_alloc_ccb_nowait()
4714 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4719 xpt_free_ccb(union ccb *free_ccb)
4721 free(free_ccb, M_CAMCCB);
4726 /* Private XPT functions */
4729 * Get a CAM control block for the caller. Charge the structure to the device
4730 * referenced by the path. If we don't have sufficient resources to allocate
4731 * more ccbs, we return NULL.
4734 xpt_get_ccb_nowait(struct cam_periph *periph)
4738 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4739 if (new_ccb == NULL)
4741 periph->periph_allocated++;
4742 cam_ccbq_take_opening(&periph->path->device->ccbq);
4747 xpt_get_ccb(struct cam_periph *periph)
4751 cam_periph_unlock(periph);
4752 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4753 cam_periph_lock(periph);
4754 periph->periph_allocated++;
4755 cam_ccbq_take_opening(&periph->path->device->ccbq);
4760 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
4762 struct ccb_hdr *ccb_h;
4764 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4765 cam_periph_assert(periph, MA_OWNED);
4766 while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4767 ccb_h->pinfo.priority != priority) {
4768 if (priority < periph->immediate_priority) {
4769 periph->immediate_priority = priority;
4770 xpt_run_allocq(periph, 0);
4772 cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4775 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4776 return ((union ccb *)ccb_h);
4780 xpt_acquire_bus(struct cam_eb *bus)
4789 xpt_release_bus(struct cam_eb *bus)
4793 KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4794 if (--bus->refcount > 0) {
4798 TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4799 xsoftc.bus_generation++;
4801 KASSERT(TAILQ_EMPTY(&bus->et_entries),
4802 ("destroying bus, but target list is not empty"));
4803 cam_sim_release(bus->sim);
4804 mtx_destroy(&bus->eb_mtx);
4805 free(bus, M_CAMXPT);
4808 static struct cam_et *
4809 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4811 struct cam_et *cur_target, *target;
4813 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4814 mtx_assert(&bus->eb_mtx, MA_OWNED);
4815 target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4820 TAILQ_INIT(&target->ed_entries);
4822 target->target_id = target_id;
4823 target->refcount = 1;
4824 target->generation = 0;
4825 target->luns = NULL;
4826 mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4827 timevalclear(&target->last_reset);
4829 * Hold a reference to our parent bus so it
4830 * will not go away before we do.
4834 /* Insertion sort into our bus's target list */
4835 cur_target = TAILQ_FIRST(&bus->et_entries);
4836 while (cur_target != NULL && cur_target->target_id < target_id)
4837 cur_target = TAILQ_NEXT(cur_target, links);
4838 if (cur_target != NULL) {
4839 TAILQ_INSERT_BEFORE(cur_target, target, links);
4841 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4848 xpt_acquire_target(struct cam_et *target)
4850 struct cam_eb *bus = target->bus;
4852 mtx_lock(&bus->eb_mtx);
4854 mtx_unlock(&bus->eb_mtx);
4858 xpt_release_target(struct cam_et *target)
4860 struct cam_eb *bus = target->bus;
4862 mtx_lock(&bus->eb_mtx);
4863 if (--target->refcount > 0) {
4864 mtx_unlock(&bus->eb_mtx);
4867 TAILQ_REMOVE(&bus->et_entries, target, links);
4869 mtx_unlock(&bus->eb_mtx);
4870 KASSERT(TAILQ_EMPTY(&target->ed_entries),
4871 ("destroying target, but device list is not empty"));
4872 xpt_release_bus(bus);
4873 mtx_destroy(&target->luns_mtx);
4875 free(target->luns, M_CAMXPT);
4876 free(target, M_CAMXPT);
4879 static struct cam_ed *
4880 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4883 struct cam_ed *device;
4885 device = xpt_alloc_device(bus, target, lun_id);
4889 device->mintags = 1;
4890 device->maxtags = 1;
4895 xpt_destroy_device(void *context, int pending)
4897 struct cam_ed *device = context;
4899 mtx_lock(&device->device_mtx);
4900 mtx_destroy(&device->device_mtx);
4901 free(device, M_CAMDEV);
4905 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4907 struct cam_ed *cur_device, *device;
4908 struct cam_devq *devq;
4911 mtx_assert(&bus->eb_mtx, MA_OWNED);
4912 /* Make space for us in the device queue on our bus */
4913 devq = bus->sim->devq;
4914 mtx_lock(&devq->send_mtx);
4915 status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4916 mtx_unlock(&devq->send_mtx);
4917 if (status != CAM_REQ_CMP)
4920 device = (struct cam_ed *)malloc(sizeof(*device),
4921 M_CAMDEV, M_NOWAIT|M_ZERO);
4925 cam_init_pinfo(&device->devq_entry);
4926 device->target = target;
4927 device->lun_id = lun_id;
4928 device->sim = bus->sim;
4929 if (cam_ccbq_init(&device->ccbq,
4930 bus->sim->max_dev_openings) != 0) {
4931 free(device, M_CAMDEV);
4934 SLIST_INIT(&device->asyncs);
4935 SLIST_INIT(&device->periphs);
4936 device->generation = 0;
4937 device->flags = CAM_DEV_UNCONFIGURED;
4938 device->tag_delay_count = 0;
4939 device->tag_saved_openings = 0;
4940 device->refcount = 1;
4941 mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4942 callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4943 TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4945 * Hold a reference to our parent bus so it
4946 * will not go away before we do.
4950 cur_device = TAILQ_FIRST(&target->ed_entries);
4951 while (cur_device != NULL && cur_device->lun_id < lun_id)
4952 cur_device = TAILQ_NEXT(cur_device, links);
4953 if (cur_device != NULL)
4954 TAILQ_INSERT_BEFORE(cur_device, device, links);
4956 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4957 target->generation++;
4962 xpt_acquire_device(struct cam_ed *device)
4964 struct cam_eb *bus = device->target->bus;
4966 mtx_lock(&bus->eb_mtx);
4968 mtx_unlock(&bus->eb_mtx);
4972 xpt_release_device(struct cam_ed *device)
4974 struct cam_eb *bus = device->target->bus;
4975 struct cam_devq *devq;
4977 mtx_lock(&bus->eb_mtx);
4978 if (--device->refcount > 0) {
4979 mtx_unlock(&bus->eb_mtx);
4983 TAILQ_REMOVE(&device->target->ed_entries, device,links);
4984 device->target->generation++;
4985 mtx_unlock(&bus->eb_mtx);
4987 /* Release our slot in the devq */
4988 devq = bus->sim->devq;
4989 mtx_lock(&devq->send_mtx);
4990 cam_devq_resize(devq, devq->send_queue.array_size - 1);
4991 mtx_unlock(&devq->send_mtx);
4993 KASSERT(SLIST_EMPTY(&device->periphs),
4994 ("destroying device, but periphs list is not empty"));
4995 KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4996 ("destroying device while still queued for ccbs"));
4998 if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4999 callout_stop(&device->callout);
5001 xpt_release_target(device->target);
5003 cam_ccbq_fini(&device->ccbq);
5005 * Free allocated memory. free(9) does nothing if the
5006 * supplied pointer is NULL, so it is safe to call without
5009 free(device->supported_vpds, M_CAMXPT);
5010 free(device->device_id, M_CAMXPT);
5011 free(device->ext_inq, M_CAMXPT);
5012 free(device->physpath, M_CAMXPT);
5013 free(device->rcap_buf, M_CAMXPT);
5014 free(device->serial_num, M_CAMXPT);
5015 taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
5019 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
5025 mtx_lock(&dev->sim->devq->send_mtx);
5026 result = cam_ccbq_resize(&dev->ccbq, newopenings);
5027 mtx_unlock(&dev->sim->devq->send_mtx);
5028 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5029 || (dev->inq_flags & SID_CmdQue) != 0)
5030 dev->tag_saved_openings = newopenings;
5034 static struct cam_eb *
5035 xpt_find_bus(path_id_t path_id)
5040 for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
5042 bus = TAILQ_NEXT(bus, links)) {
5043 if (bus->path_id == path_id) {
5052 static struct cam_et *
5053 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
5055 struct cam_et *target;
5057 mtx_assert(&bus->eb_mtx, MA_OWNED);
5058 for (target = TAILQ_FIRST(&bus->et_entries);
5060 target = TAILQ_NEXT(target, links)) {
5061 if (target->target_id == target_id) {
5069 static struct cam_ed *
5070 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
5072 struct cam_ed *device;
5074 mtx_assert(&target->bus->eb_mtx, MA_OWNED);
5075 for (device = TAILQ_FIRST(&target->ed_entries);
5077 device = TAILQ_NEXT(device, links)) {
5078 if (device->lun_id == lun_id) {
5087 xpt_start_tags(struct cam_path *path)
5089 struct ccb_relsim crs;
5090 struct cam_ed *device;
5091 struct cam_sim *sim;
5094 device = path->device;
5095 sim = path->bus->sim;
5096 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
5097 xpt_freeze_devq(path, /*count*/1);
5098 device->inq_flags |= SID_CmdQue;
5099 if (device->tag_saved_openings != 0)
5100 newopenings = device->tag_saved_openings;
5102 newopenings = min(device->maxtags,
5103 sim->max_tagged_dev_openings);
5104 xpt_dev_ccbq_resize(path, newopenings);
5105 xpt_async(AC_GETDEV_CHANGED, path, NULL);
5106 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
5107 crs.ccb_h.func_code = XPT_REL_SIMQ;
5108 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
5110 = crs.release_timeout
5113 xpt_action((union ccb *)&crs);
5117 xpt_stop_tags(struct cam_path *path)
5119 struct ccb_relsim crs;
5120 struct cam_ed *device;
5121 struct cam_sim *sim;
5123 device = path->device;
5124 sim = path->bus->sim;
5125 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
5126 device->tag_delay_count = 0;
5127 xpt_freeze_devq(path, /*count*/1);
5128 device->inq_flags &= ~SID_CmdQue;
5129 xpt_dev_ccbq_resize(path, sim->max_dev_openings);
5130 xpt_async(AC_GETDEV_CHANGED, path, NULL);
5131 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
5132 crs.ccb_h.func_code = XPT_REL_SIMQ;
5133 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
5135 = crs.release_timeout
5138 xpt_action((union ccb *)&crs);
5142 xpt_boot_delay(void *arg)
5149 xpt_config(void *arg)
5152 * Now that interrupts are enabled, go find our devices
5154 if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
5155 printf("xpt_config: failed to create taskqueue thread.\n");
5157 /* Setup debugging path */
5158 if (cam_dflags != CAM_DEBUG_NONE) {
5159 if (xpt_create_path(&cam_dpath, NULL,
5160 CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
5161 CAM_DEBUG_LUN) != CAM_REQ_CMP) {
5162 printf("xpt_config: xpt_create_path() failed for debug"
5163 " target %d:%d:%d, debugging disabled\n",
5164 CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
5165 cam_dflags = CAM_DEBUG_NONE;
5170 periphdriver_init(1);
5172 callout_init(&xsoftc.boot_callout, 1);
5173 callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0,
5174 xpt_boot_delay, NULL, 0);
5175 /* Fire up rescan thread. */
5176 if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
5177 "cam", "scanner")) {
5178 printf("xpt_config: failed to create rescan thread.\n");
5186 xsoftc.buses_to_config++;
5191 xpt_release_boot(void)
5194 xsoftc.buses_to_config--;
5195 if (xsoftc.buses_to_config == 0 && xsoftc.buses_config_done == 0) {
5196 struct xpt_task *task;
5198 xsoftc.buses_config_done = 1;
5200 /* Call manually because we don't have any buses */
5201 task = malloc(sizeof(struct xpt_task), M_CAMXPT, M_NOWAIT);
5203 TASK_INIT(&task->task, 0, xpt_finishconfig_task, task);
5204 taskqueue_enqueue(taskqueue_thread, &task->task);
5211 * If the given device only has one peripheral attached to it, and if that
5212 * peripheral is the passthrough driver, announce it. This insures that the
5213 * user sees some sort of announcement for every peripheral in their system.
5216 xptpassannouncefunc(struct cam_ed *device, void *arg)
5218 struct cam_periph *periph;
5221 for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
5222 periph = SLIST_NEXT(periph, periph_links), i++);
5224 periph = SLIST_FIRST(&device->periphs);
5226 && (strncmp(periph->periph_name, "pass", 4) == 0))
5227 xpt_announce_periph(periph, NULL);
5233 xpt_finishconfig_task(void *context, int pending)
5236 periphdriver_init(2);
5238 * Check for devices with no "standard" peripheral driver
5239 * attached. For any devices like that, announce the
5240 * passthrough driver so the user will see something.
5243 xpt_for_all_devices(xptpassannouncefunc, NULL);
5245 /* Release our hook so that the boot can continue. */
5246 config_intrhook_disestablish(xsoftc.xpt_config_hook);
5247 free(xsoftc.xpt_config_hook, M_CAMXPT);
5248 xsoftc.xpt_config_hook = NULL;
5250 free(context, M_CAMXPT);
5254 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5255 struct cam_path *path)
5257 struct ccb_setasync csa;
5262 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5263 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5264 if (status != CAM_REQ_CMP)
5266 xpt_path_lock(path);
5270 xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5271 csa.ccb_h.func_code = XPT_SASYNC_CB;
5272 csa.event_enable = event;
5273 csa.callback = cbfunc;
5274 csa.callback_arg = cbarg;
5275 xpt_action((union ccb *)&csa);
5276 status = csa.ccb_h.status;
5278 CAM_DEBUG(csa.ccb_h.path, CAM_DEBUG_TRACE,
5279 ("xpt_register_async: func %p\n", cbfunc));
5282 xpt_path_unlock(path);
5283 xpt_free_path(path);
5286 if ((status == CAM_REQ_CMP) &&
5287 (csa.event_enable & AC_FOUND_DEVICE)) {
5289 * Get this peripheral up to date with all
5290 * the currently existing devices.
5292 xpt_for_all_devices(xptsetasyncfunc, &csa);
5294 if ((status == CAM_REQ_CMP) &&
5295 (csa.event_enable & AC_PATH_REGISTERED)) {
5297 * Get this peripheral up to date with all
5298 * the currently existing buses.
5300 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5307 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5309 CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5311 switch (work_ccb->ccb_h.func_code) {
5312 /* Common cases first */
5313 case XPT_PATH_INQ: /* Path routing inquiry */
5315 struct ccb_pathinq *cpi;
5317 cpi = &work_ccb->cpi;
5318 cpi->version_num = 1; /* XXX??? */
5319 cpi->hba_inquiry = 0;
5320 cpi->target_sprt = 0;
5322 cpi->hba_eng_cnt = 0;
5323 cpi->max_target = 0;
5325 cpi->initiator_id = 0;
5326 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5327 strlcpy(cpi->hba_vid, "", HBA_IDLEN);
5328 strlcpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5329 cpi->unit_number = sim->unit_number;
5330 cpi->bus_id = sim->bus_id;
5331 cpi->base_transfer_speed = 0;
5332 cpi->protocol = PROTO_UNSPECIFIED;
5333 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5334 cpi->transport = XPORT_UNSPECIFIED;
5335 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5336 cpi->ccb_h.status = CAM_REQ_CMP;
5341 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5348 * The xpt as a "controller" has no interrupt sources, so polling
5352 xptpoll(struct cam_sim *sim)
5357 xpt_lock_buses(void)
5359 mtx_lock(&xsoftc.xpt_topo_lock);
5363 xpt_unlock_buses(void)
5365 mtx_unlock(&xsoftc.xpt_topo_lock);
5369 xpt_path_mtx(struct cam_path *path)
5372 return (&path->device->device_mtx);
5376 xpt_done_process(struct ccb_hdr *ccb_h)
5378 struct cam_sim *sim;
5379 struct cam_devq *devq;
5380 struct mtx *mtx = NULL;
5382 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
5383 struct ccb_scsiio *csio;
5385 if (ccb_h->func_code == XPT_SCSI_IO) {
5386 csio = &((union ccb *)ccb_h)->csio;
5387 if (csio->bio != NULL)
5388 biotrack(csio->bio, __func__);
5392 if (ccb_h->flags & CAM_HIGH_POWER) {
5393 struct highpowerlist *hphead;
5394 struct cam_ed *device;
5396 mtx_lock(&xsoftc.xpt_highpower_lock);
5397 hphead = &xsoftc.highpowerq;
5399 device = STAILQ_FIRST(hphead);
5402 * Increment the count since this command is done.
5404 xsoftc.num_highpower++;
5407 * Any high powered commands queued up?
5409 if (device != NULL) {
5411 STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5412 mtx_unlock(&xsoftc.xpt_highpower_lock);
5414 mtx_lock(&device->sim->devq->send_mtx);
5415 xpt_release_devq_device(device,
5416 /*count*/1, /*runqueue*/TRUE);
5417 mtx_unlock(&device->sim->devq->send_mtx);
5419 mtx_unlock(&xsoftc.xpt_highpower_lock);
5422 sim = ccb_h->path->bus->sim;
5424 if (ccb_h->status & CAM_RELEASE_SIMQ) {
5425 xpt_release_simq(sim, /*run_queue*/FALSE);
5426 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5429 if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5430 && (ccb_h->status & CAM_DEV_QFRZN)) {
5431 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5432 ccb_h->status &= ~CAM_DEV_QFRZN;
5436 if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5437 struct cam_ed *dev = ccb_h->path->device;
5439 mtx_lock(&devq->send_mtx);
5440 devq->send_active--;
5441 devq->send_openings++;
5442 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5444 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5445 && (dev->ccbq.dev_active == 0))) {
5446 dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5447 xpt_release_devq_device(dev, /*count*/1,
5448 /*run_queue*/FALSE);
5451 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5452 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5453 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5454 xpt_release_devq_device(dev, /*count*/1,
5455 /*run_queue*/FALSE);
5458 if (!device_is_queued(dev))
5459 (void)xpt_schedule_devq(devq, dev);
5461 mtx_unlock(&devq->send_mtx);
5463 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5464 mtx = xpt_path_mtx(ccb_h->path);
5467 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5468 && (--dev->tag_delay_count == 0))
5469 xpt_start_tags(ccb_h->path);
5473 if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5475 mtx = xpt_path_mtx(ccb_h->path);
5485 /* Call the peripheral driver's callback */
5486 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5487 (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5493 xpt_done_td(void *arg)
5495 struct cam_doneq *queue = arg;
5496 struct ccb_hdr *ccb_h;
5497 STAILQ_HEAD(, ccb_hdr) doneq;
5499 STAILQ_INIT(&doneq);
5500 mtx_lock(&queue->cam_doneq_mtx);
5502 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5503 queue->cam_doneq_sleep = 1;
5504 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5506 queue->cam_doneq_sleep = 0;
5508 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5509 mtx_unlock(&queue->cam_doneq_mtx);
5511 THREAD_NO_SLEEPING();
5512 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5513 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5514 xpt_done_process(ccb_h);
5516 THREAD_SLEEPING_OK();
5518 mtx_lock(&queue->cam_doneq_mtx);
5523 camisr_runqueue(void)
5525 struct ccb_hdr *ccb_h;
5526 struct cam_doneq *queue;
5529 /* Process global queues. */
5530 for (i = 0; i < cam_num_doneqs; i++) {
5531 queue = &cam_doneqs[i];
5532 mtx_lock(&queue->cam_doneq_mtx);
5533 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5534 STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5535 mtx_unlock(&queue->cam_doneq_mtx);
5536 xpt_done_process(ccb_h);
5537 mtx_lock(&queue->cam_doneq_mtx);
5539 mtx_unlock(&queue->cam_doneq_mtx);
5549 static struct kv map[] = {
5550 { XPT_NOOP, "XPT_NOOP" },
5551 { XPT_SCSI_IO, "XPT_SCSI_IO" },
5552 { XPT_GDEV_TYPE, "XPT_GDEV_TYPE" },
5553 { XPT_GDEVLIST, "XPT_GDEVLIST" },
5554 { XPT_PATH_INQ, "XPT_PATH_INQ" },
5555 { XPT_REL_SIMQ, "XPT_REL_SIMQ" },
5556 { XPT_SASYNC_CB, "XPT_SASYNC_CB" },
5557 { XPT_SDEV_TYPE, "XPT_SDEV_TYPE" },
5558 { XPT_SCAN_BUS, "XPT_SCAN_BUS" },
5559 { XPT_DEV_MATCH, "XPT_DEV_MATCH" },
5560 { XPT_DEBUG, "XPT_DEBUG" },
5561 { XPT_PATH_STATS, "XPT_PATH_STATS" },
5562 { XPT_GDEV_STATS, "XPT_GDEV_STATS" },
5563 { XPT_DEV_ADVINFO, "XPT_DEV_ADVINFO" },
5564 { XPT_ASYNC, "XPT_ASYNC" },
5565 { XPT_ABORT, "XPT_ABORT" },
5566 { XPT_RESET_BUS, "XPT_RESET_BUS" },
5567 { XPT_RESET_DEV, "XPT_RESET_DEV" },
5568 { XPT_TERM_IO, "XPT_TERM_IO" },
5569 { XPT_SCAN_LUN, "XPT_SCAN_LUN" },
5570 { XPT_GET_TRAN_SETTINGS, "XPT_GET_TRAN_SETTINGS" },
5571 { XPT_SET_TRAN_SETTINGS, "XPT_SET_TRAN_SETTINGS" },
5572 { XPT_CALC_GEOMETRY, "XPT_CALC_GEOMETRY" },
5573 { XPT_ATA_IO, "XPT_ATA_IO" },
5574 { XPT_GET_SIM_KNOB, "XPT_GET_SIM_KNOB" },
5575 { XPT_SET_SIM_KNOB, "XPT_SET_SIM_KNOB" },
5576 { XPT_NVME_IO, "XPT_NVME_IO" },
5577 { XPT_MMC_IO, "XPT_MMC_IO" },
5578 { XPT_SMP_IO, "XPT_SMP_IO" },
5579 { XPT_SCAN_TGT, "XPT_SCAN_TGT" },
5580 { XPT_NVME_ADMIN, "XPT_NVME_ADMIN" },
5581 { XPT_ENG_INQ, "XPT_ENG_INQ" },
5582 { XPT_ENG_EXEC, "XPT_ENG_EXEC" },
5583 { XPT_EN_LUN, "XPT_EN_LUN" },
5584 { XPT_TARGET_IO, "XPT_TARGET_IO" },
5585 { XPT_ACCEPT_TARGET_IO, "XPT_ACCEPT_TARGET_IO" },
5586 { XPT_CONT_TARGET_IO, "XPT_CONT_TARGET_IO" },
5587 { XPT_IMMED_NOTIFY, "XPT_IMMED_NOTIFY" },
5588 { XPT_NOTIFY_ACK, "XPT_NOTIFY_ACK" },
5589 { XPT_IMMEDIATE_NOTIFY, "XPT_IMMEDIATE_NOTIFY" },
5590 { XPT_NOTIFY_ACKNOWLEDGE, "XPT_NOTIFY_ACKNOWLEDGE" },
5595 xpt_action_name(uint32_t action)
5597 static char buffer[32]; /* Only for unknown messages -- racy */
5598 struct kv *walker = map;
5600 while (walker->name != NULL) {
5601 if (walker->v == action)
5602 return (walker->name);
5606 snprintf(buffer, sizeof(buffer), "%#x", action);