2 * Implementation of the Common Access Method Transport (XPT) layer.
4 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
5 * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/types.h>
37 #include <sys/malloc.h>
38 #include <sys/kernel.h>
41 #include <sys/fcntl.h>
42 #include <sys/interrupt.h>
46 #include <sys/taskqueue.h>
49 #include <sys/mutex.h>
50 #include <sys/sysctl.h>
51 #include <sys/kthread.h>
54 #include <cam/cam_ccb.h>
55 #include <cam/cam_periph.h>
56 #include <cam/cam_queue.h>
57 #include <cam/cam_sim.h>
58 #include <cam/cam_xpt.h>
59 #include <cam/cam_xpt_sim.h>
60 #include <cam/cam_xpt_periph.h>
61 #include <cam/cam_xpt_internal.h>
62 #include <cam/cam_debug.h>
63 #include <cam/cam_compat.h>
65 #include <cam/scsi/scsi_all.h>
66 #include <cam/scsi/scsi_message.h>
67 #include <cam/scsi/scsi_pass.h>
69 #include <machine/md_var.h> /* geometry translation */
70 #include <machine/stdarg.h> /* for xpt_print below */
75 * This is the maximum number of high powered commands (e.g. start unit)
76 * that can be outstanding at a particular time.
78 #ifndef CAM_MAX_HIGHPOWER
79 #define CAM_MAX_HIGHPOWER 4
82 /* Datastructures internal to the xpt layer */
83 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
84 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
85 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
86 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
88 /* Object for defering XPT actions to a taskqueue */
96 /* number of high powered commands that can go through right now */
97 struct mtx xpt_highpower_lock;
98 STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
101 /* queue for handling async rescan requests. */
102 TAILQ_HEAD(, ccb_hdr) ccb_scanq;
104 int buses_config_done;
106 /* Registered busses */
107 TAILQ_HEAD(,cam_eb) xpt_busses;
108 u_int bus_generation;
110 struct intr_config_hook *xpt_config_hook;
113 struct callout boot_callout;
115 struct mtx xpt_topo_lock;
117 struct taskqueue *xpt_taskq;
122 DM_RET_FLAG_MASK = 0x0f,
125 DM_RET_DESCEND = 0x20,
127 DM_RET_ACTION_MASK = 0xf0
135 } xpt_traverse_depth;
137 struct xpt_traverse_config {
138 xpt_traverse_depth depth;
143 typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
144 typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
145 typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
146 typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
147 typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
149 /* Transport layer configuration information */
150 static struct xpt_softc xsoftc;
152 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
153 &xsoftc.boot_delay, 0, "Bus registration wait time");
156 struct mtx_padalign cam_doneq_mtx;
157 STAILQ_HEAD(, ccb_hdr) cam_doneq;
161 static struct cam_doneq cam_doneqs[MAXCPU];
162 static int cam_num_doneqs;
163 static struct proc *cam_proc;
165 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
166 &cam_num_doneqs, 0, "Number of completion queues/threads");
168 struct cam_periph *xpt_periph;
170 static periph_init_t xpt_periph_init;
172 static struct periph_driver xpt_driver =
174 xpt_periph_init, "xpt",
175 TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
179 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
181 static d_open_t xptopen;
182 static d_close_t xptclose;
183 static d_ioctl_t xptioctl;
184 static d_ioctl_t xptdoioctl;
186 static struct cdevsw xpt_cdevsw = {
187 .d_version = D_VERSION,
195 /* Storage for debugging datastructures */
196 struct cam_path *cam_dpath;
197 u_int32_t cam_dflags = CAM_DEBUG_FLAGS;
198 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN,
199 &cam_dflags, 0, "Enabled debug flags");
200 u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
201 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN,
202 &cam_debug_delay, 0, "Delay in us after each debug message");
204 /* Our boot-time initialization hook */
205 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
207 static moduledata_t cam_moduledata = {
209 cam_module_event_handler,
213 static int xpt_init(void *);
215 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
216 MODULE_VERSION(cam, 1);
219 static void xpt_async_bcast(struct async_list *async_head,
220 u_int32_t async_code,
221 struct cam_path *path,
223 static path_id_t xptnextfreepathid(void);
224 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
225 static union ccb *xpt_get_ccb(struct cam_periph *periph);
226 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
227 static void xpt_run_allocq(struct cam_periph *periph, int sleep);
228 static void xpt_run_allocq_task(void *context, int pending);
229 static void xpt_run_devq(struct cam_devq *devq);
230 static timeout_t xpt_release_devq_timeout;
231 static void xpt_release_simq_timeout(void *arg) __unused;
232 static void xpt_acquire_bus(struct cam_eb *bus);
233 static void xpt_release_bus(struct cam_eb *bus);
234 static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
235 static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
237 static struct cam_et*
238 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
239 static void xpt_acquire_target(struct cam_et *target);
240 static void xpt_release_target(struct cam_et *target);
241 static struct cam_eb*
242 xpt_find_bus(path_id_t path_id);
243 static struct cam_et*
244 xpt_find_target(struct cam_eb *bus, target_id_t target_id);
245 static struct cam_ed*
246 xpt_find_device(struct cam_et *target, lun_id_t lun_id);
247 static void xpt_config(void *arg);
248 static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
249 u_int32_t new_priority);
250 static xpt_devicefunc_t xptpassannouncefunc;
251 static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
252 static void xptpoll(struct cam_sim *sim);
253 static void camisr_runqueue(void);
254 static void xpt_done_process(struct ccb_hdr *ccb_h);
255 static void xpt_done_td(void *);
256 static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
257 u_int num_patterns, struct cam_eb *bus);
258 static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
260 struct cam_ed *device);
261 static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
263 struct cam_periph *periph);
264 static xpt_busfunc_t xptedtbusfunc;
265 static xpt_targetfunc_t xptedttargetfunc;
266 static xpt_devicefunc_t xptedtdevicefunc;
267 static xpt_periphfunc_t xptedtperiphfunc;
268 static xpt_pdrvfunc_t xptplistpdrvfunc;
269 static xpt_periphfunc_t xptplistperiphfunc;
270 static int xptedtmatch(struct ccb_dev_match *cdm);
271 static int xptperiphlistmatch(struct ccb_dev_match *cdm);
272 static int xptbustraverse(struct cam_eb *start_bus,
273 xpt_busfunc_t *tr_func, void *arg);
274 static int xpttargettraverse(struct cam_eb *bus,
275 struct cam_et *start_target,
276 xpt_targetfunc_t *tr_func, void *arg);
277 static int xptdevicetraverse(struct cam_et *target,
278 struct cam_ed *start_device,
279 xpt_devicefunc_t *tr_func, void *arg);
280 static int xptperiphtraverse(struct cam_ed *device,
281 struct cam_periph *start_periph,
282 xpt_periphfunc_t *tr_func, void *arg);
283 static int xptpdrvtraverse(struct periph_driver **start_pdrv,
284 xpt_pdrvfunc_t *tr_func, void *arg);
285 static int xptpdperiphtraverse(struct periph_driver **pdrv,
286 struct cam_periph *start_periph,
287 xpt_periphfunc_t *tr_func,
289 static xpt_busfunc_t xptdefbusfunc;
290 static xpt_targetfunc_t xptdeftargetfunc;
291 static xpt_devicefunc_t xptdefdevicefunc;
292 static xpt_periphfunc_t xptdefperiphfunc;
293 static void xpt_finishconfig_task(void *context, int pending);
294 static void xpt_dev_async_default(u_int32_t async_code,
296 struct cam_et *target,
297 struct cam_ed *device,
299 static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
300 struct cam_et *target,
302 static xpt_devicefunc_t xptsetasyncfunc;
303 static xpt_busfunc_t xptsetasyncbusfunc;
304 static cam_status xptregister(struct cam_periph *periph,
306 static __inline int device_is_queued(struct cam_ed *device);
309 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
313 mtx_assert(&devq->send_mtx, MA_OWNED);
314 if ((dev->ccbq.queue.entries > 0) &&
315 (dev->ccbq.dev_openings > 0) &&
316 (dev->ccbq.queue.qfrozen_cnt == 0)) {
318 * The priority of a device waiting for controller
319 * resources is that of the highest priority CCB
323 xpt_schedule_dev(&devq->send_queue,
325 CAMQ_GET_PRIO(&dev->ccbq.queue));
333 device_is_queued(struct cam_ed *device)
335 return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
341 make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
345 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
349 * Only allow read-write access.
351 if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
355 * We don't allow nonblocking access.
357 if ((flags & O_NONBLOCK) != 0) {
358 printf("%s: can't do nonblocking access\n", devtoname(dev));
366 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
373 * Don't automatically grab the xpt softc lock here even though this is going
374 * through the xpt device. The xpt device is really just a back door for
375 * accessing other devices and SIMs, so the right thing to do is to grab
376 * the appropriate SIM lock once the bus/SIM is located.
379 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
383 if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
384 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
390 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
398 * For the transport layer CAMIOCOMMAND ioctl, we really only want
399 * to accept CCB types that don't quite make sense to send through a
400 * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
408 inccb = (union ccb *)addr;
410 bus = xpt_find_bus(inccb->ccb_h.path_id);
414 switch (inccb->ccb_h.func_code) {
417 if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
418 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
419 xpt_release_bus(bus);
424 if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
425 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
426 xpt_release_bus(bus);
434 switch(inccb->ccb_h.func_code) {
442 ccb = xpt_alloc_ccb();
445 * Create a path using the bus, target, and lun the
448 if (xpt_create_path(&ccb->ccb_h.path, NULL,
449 inccb->ccb_h.path_id,
450 inccb->ccb_h.target_id,
451 inccb->ccb_h.target_lun) !=
457 /* Ensure all of our fields are correct */
458 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
459 inccb->ccb_h.pinfo.priority);
460 xpt_merge_ccb(ccb, inccb);
461 xpt_path_lock(ccb->ccb_h.path);
462 cam_periph_runccb(ccb, NULL, 0, 0, NULL);
463 xpt_path_unlock(ccb->ccb_h.path);
464 bcopy(ccb, inccb, sizeof(union ccb));
465 xpt_free_path(ccb->ccb_h.path);
473 * This is an immediate CCB, so it's okay to
474 * allocate it on the stack.
478 * Create a path using the bus, target, and lun the
481 if (xpt_create_path(&ccb.ccb_h.path, NULL,
482 inccb->ccb_h.path_id,
483 inccb->ccb_h.target_id,
484 inccb->ccb_h.target_lun) !=
489 /* Ensure all of our fields are correct */
490 xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
491 inccb->ccb_h.pinfo.priority);
492 xpt_merge_ccb(&ccb, inccb);
494 bcopy(&ccb, inccb, sizeof(union ccb));
495 xpt_free_path(ccb.ccb_h.path);
499 case XPT_DEV_MATCH: {
500 struct cam_periph_map_info mapinfo;
501 struct cam_path *old_path;
504 * We can't deal with physical addresses for this
505 * type of transaction.
507 if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
514 * Save this in case the caller had it set to
515 * something in particular.
517 old_path = inccb->ccb_h.path;
520 * We really don't need a path for the matching
521 * code. The path is needed because of the
522 * debugging statements in xpt_action(). They
523 * assume that the CCB has a valid path.
525 inccb->ccb_h.path = xpt_periph->path;
527 bzero(&mapinfo, sizeof(mapinfo));
530 * Map the pattern and match buffers into kernel
531 * virtual address space.
533 error = cam_periph_mapmem(inccb, &mapinfo);
536 inccb->ccb_h.path = old_path;
541 * This is an immediate CCB, we can send it on directly.
546 * Map the buffers back into user space.
548 cam_periph_unmapmem(inccb, &mapinfo);
550 inccb->ccb_h.path = old_path;
559 xpt_release_bus(bus);
563 * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
564 * with the periphal driver name and unit name filled in. The other
565 * fields don't really matter as input. The passthrough driver name
566 * ("pass"), and unit number are passed back in the ccb. The current
567 * device generation number, and the index into the device peripheral
568 * driver list, and the status are also passed back. Note that
569 * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
570 * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
571 * (or rather should be) impossible for the device peripheral driver
572 * list to change since we look at the whole thing in one pass, and
573 * we do it with lock protection.
576 case CAMGETPASSTHRU: {
578 struct cam_periph *periph;
579 struct periph_driver **p_drv;
582 int base_periph_found;
584 ccb = (union ccb *)addr;
585 unit = ccb->cgdl.unit_number;
586 name = ccb->cgdl.periph_name;
587 base_periph_found = 0;
590 * Sanity check -- make sure we don't get a null peripheral
593 if (*ccb->cgdl.periph_name == '\0') {
598 /* Keep the list from changing while we traverse it */
601 /* first find our driver in the list of drivers */
602 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
603 if (strcmp((*p_drv)->driver_name, name) == 0)
606 if (*p_drv == NULL) {
608 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
609 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
610 *ccb->cgdl.periph_name = '\0';
611 ccb->cgdl.unit_number = 0;
617 * Run through every peripheral instance of this driver
618 * and check to see whether it matches the unit passed
619 * in by the user. If it does, get out of the loops and
620 * find the passthrough driver associated with that
623 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
624 periph = TAILQ_NEXT(periph, unit_links)) {
626 if (periph->unit_number == unit)
630 * If we found the peripheral driver that the user passed
631 * in, go through all of the peripheral drivers for that
632 * particular device and look for a passthrough driver.
634 if (periph != NULL) {
635 struct cam_ed *device;
638 base_periph_found = 1;
639 device = periph->path->device;
640 for (i = 0, periph = SLIST_FIRST(&device->periphs);
642 periph = SLIST_NEXT(periph, periph_links), i++) {
644 * Check to see whether we have a
645 * passthrough device or not.
647 if (strcmp(periph->periph_name, "pass") == 0) {
649 * Fill in the getdevlist fields.
651 strcpy(ccb->cgdl.periph_name,
652 periph->periph_name);
653 ccb->cgdl.unit_number =
655 if (SLIST_NEXT(periph, periph_links))
657 CAM_GDEVLIST_MORE_DEVS;
660 CAM_GDEVLIST_LAST_DEVICE;
661 ccb->cgdl.generation =
665 * Fill in some CCB header fields
666 * that the user may want.
669 periph->path->bus->path_id;
670 ccb->ccb_h.target_id =
671 periph->path->target->target_id;
672 ccb->ccb_h.target_lun =
673 periph->path->device->lun_id;
674 ccb->ccb_h.status = CAM_REQ_CMP;
681 * If the periph is null here, one of two things has
682 * happened. The first possibility is that we couldn't
683 * find the unit number of the particular peripheral driver
684 * that the user is asking about. e.g. the user asks for
685 * the passthrough driver for "da11". We find the list of
686 * "da" peripherals all right, but there is no unit 11.
687 * The other possibility is that we went through the list
688 * of peripheral drivers attached to the device structure,
689 * but didn't find one with the name "pass". Either way,
690 * we return ENOENT, since we couldn't find something.
692 if (periph == NULL) {
693 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
694 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
695 *ccb->cgdl.periph_name = '\0';
696 ccb->cgdl.unit_number = 0;
699 * It is unfortunate that this is even necessary,
700 * but there are many, many clueless users out there.
701 * If this is true, the user is looking for the
702 * passthrough driver, but doesn't have one in his
705 if (base_periph_found == 1) {
706 printf("xptioctl: pass driver is not in the "
708 printf("xptioctl: put \"device pass\" in "
709 "your kernel config file\n");
724 cam_module_event_handler(module_t mod, int what, void *arg)
730 if ((error = xpt_init(NULL)) != 0)
743 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
746 if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
747 xpt_free_path(done_ccb->ccb_h.path);
748 xpt_free_ccb(done_ccb);
750 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
751 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
756 /* thread to handle bus rescans */
758 xpt_scanner_thread(void *dummy)
761 struct cam_path path;
765 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
766 msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
768 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
769 TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
773 * Since lock can be dropped inside and path freed
774 * by completion callback even before return here,
775 * take our own path copy for reference.
777 xpt_copy_path(&path, ccb->ccb_h.path);
778 xpt_path_lock(&path);
780 xpt_path_unlock(&path);
781 xpt_release_path(&path);
789 xpt_rescan(union ccb *ccb)
793 /* Prepare request */
794 if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
795 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
796 ccb->ccb_h.func_code = XPT_SCAN_BUS;
797 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
798 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
799 ccb->ccb_h.func_code = XPT_SCAN_TGT;
800 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
801 ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
802 ccb->ccb_h.func_code = XPT_SCAN_LUN;
804 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
805 xpt_free_path(ccb->ccb_h.path);
809 ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
810 ccb->ccb_h.cbfcnp = xpt_rescan_done;
811 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
812 /* Don't make duplicate entries for the same paths. */
814 if (ccb->ccb_h.ppriv_ptr1 == NULL) {
815 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
816 if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
817 wakeup(&xsoftc.ccb_scanq);
819 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
820 xpt_free_path(ccb->ccb_h.path);
826 TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
827 xsoftc.buses_to_config++;
828 wakeup(&xsoftc.ccb_scanq);
832 /* Functions accessed by the peripheral drivers */
834 xpt_init(void *dummy)
836 struct cam_sim *xpt_sim;
837 struct cam_path *path;
838 struct cam_devq *devq;
842 TAILQ_INIT(&xsoftc.xpt_busses);
843 TAILQ_INIT(&xsoftc.ccb_scanq);
844 STAILQ_INIT(&xsoftc.highpowerq);
845 xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
847 mtx_init(&xsoftc.xpt_lock, "XPT lock", NULL, MTX_DEF);
848 mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
849 mtx_init(&xsoftc.xpt_topo_lock, "XPT topology lock", NULL, MTX_DEF);
850 xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
851 taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
853 #ifdef CAM_BOOT_DELAY
855 * Override this value at compile time to assist our users
856 * who don't use loader to boot a kernel.
858 xsoftc.boot_delay = CAM_BOOT_DELAY;
861 * The xpt layer is, itself, the equivelent of a SIM.
862 * Allow 16 ccbs in the ccb pool for it. This should
863 * give decent parallelism when we probe busses and
864 * perform other XPT functions.
866 devq = cam_simq_alloc(16);
867 xpt_sim = cam_sim_alloc(xptaction,
872 /*mtx*/&xsoftc.xpt_lock,
873 /*max_dev_transactions*/0,
874 /*max_tagged_dev_transactions*/0,
879 mtx_lock(&xsoftc.xpt_lock);
880 if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
881 mtx_unlock(&xsoftc.xpt_lock);
882 printf("xpt_init: xpt_bus_register failed with status %#x,"
883 " failing attach\n", status);
886 mtx_unlock(&xsoftc.xpt_lock);
889 * Looking at the XPT from the SIM layer, the XPT is
890 * the equivelent of a peripheral driver. Allocate
891 * a peripheral driver entry for us.
893 if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
895 CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
896 mtx_unlock(&xsoftc.xpt_lock);
897 printf("xpt_init: xpt_create_path failed with status %#x,"
898 " failing attach\n", status);
902 cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
903 path, NULL, 0, xpt_sim);
904 xpt_path_unlock(path);
907 if (cam_num_doneqs < 1)
908 cam_num_doneqs = 1 + mp_ncpus / 6;
909 else if (cam_num_doneqs > MAXCPU)
910 cam_num_doneqs = MAXCPU;
911 for (i = 0; i < cam_num_doneqs; i++) {
912 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
914 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
915 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
916 &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
922 if (cam_num_doneqs < 1) {
923 printf("xpt_init: Cannot init completion queues "
924 "- failing attach\n");
928 * Register a callback for when interrupts are enabled.
930 xsoftc.xpt_config_hook =
931 (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
932 M_CAMXPT, M_NOWAIT | M_ZERO);
933 if (xsoftc.xpt_config_hook == NULL) {
934 printf("xpt_init: Cannot malloc config hook "
935 "- failing attach\n");
938 xsoftc.xpt_config_hook->ich_func = xpt_config;
939 if (config_intrhook_establish(xsoftc.xpt_config_hook) != 0) {
940 free (xsoftc.xpt_config_hook, M_CAMXPT);
941 printf("xpt_init: config_intrhook_establish failed "
942 "- failing attach\n");
949 xptregister(struct cam_periph *periph, void *arg)
951 struct cam_sim *xpt_sim;
953 if (periph == NULL) {
954 printf("xptregister: periph was NULL!!\n");
955 return(CAM_REQ_CMP_ERR);
958 xpt_sim = (struct cam_sim *)arg;
959 xpt_sim->softc = periph;
961 periph->softc = NULL;
967 xpt_add_periph(struct cam_periph *periph)
969 struct cam_ed *device;
972 TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
973 device = periph->path->device;
974 status = CAM_REQ_CMP;
975 if (device != NULL) {
976 mtx_lock(&device->target->bus->eb_mtx);
977 device->generation++;
978 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
979 mtx_unlock(&device->target->bus->eb_mtx);
986 xpt_remove_periph(struct cam_periph *periph)
988 struct cam_ed *device;
990 device = periph->path->device;
991 if (device != NULL) {
992 mtx_lock(&device->target->bus->eb_mtx);
993 device->generation++;
994 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
995 mtx_unlock(&device->target->bus->eb_mtx);
1001 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1003 struct cam_path *path = periph->path;
1005 cam_periph_assert(periph, MA_OWNED);
1006 periph->flags |= CAM_PERIPH_ANNOUNCED;
1008 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1009 periph->periph_name, periph->unit_number,
1010 path->bus->sim->sim_name,
1011 path->bus->sim->unit_number,
1012 path->bus->sim->bus_id,
1014 path->target->target_id,
1015 (uintmax_t)path->device->lun_id);
1016 printf("%s%d: ", periph->periph_name, periph->unit_number);
1017 if (path->device->protocol == PROTO_SCSI)
1018 scsi_print_inquiry(&path->device->inq_data);
1019 else if (path->device->protocol == PROTO_ATA ||
1020 path->device->protocol == PROTO_SATAPM)
1021 ata_print_ident(&path->device->ident_data);
1022 else if (path->device->protocol == PROTO_SEMB)
1024 (struct sep_identify_data *)&path->device->ident_data);
1026 printf("Unknown protocol device\n");
1027 if (path->device->serial_num_len > 0) {
1028 /* Don't wrap the screen - print only the first 60 chars */
1029 printf("%s%d: Serial Number %.60s\n", periph->periph_name,
1030 periph->unit_number, path->device->serial_num);
1032 /* Announce transport details. */
1033 (*(path->bus->xport->announce))(periph);
1034 /* Announce command queueing. */
1035 if (path->device->inq_flags & SID_CmdQue
1036 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1037 printf("%s%d: Command Queueing enabled\n",
1038 periph->periph_name, periph->unit_number);
1040 /* Announce caller's details if they've passed in. */
1041 if (announce_string != NULL)
1042 printf("%s%d: %s\n", periph->periph_name,
1043 periph->unit_number, announce_string);
1047 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1050 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1051 periph->unit_number, quirks, bit_string);
1056 xpt_denounce_periph(struct cam_periph *periph)
1058 struct cam_path *path = periph->path;
1060 cam_periph_assert(periph, MA_OWNED);
1061 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1062 periph->periph_name, periph->unit_number,
1063 path->bus->sim->sim_name,
1064 path->bus->sim->unit_number,
1065 path->bus->sim->bus_id,
1067 path->target->target_id,
1068 (uintmax_t)path->device->lun_id);
1069 printf("%s%d: ", periph->periph_name, periph->unit_number);
1070 if (path->device->protocol == PROTO_SCSI)
1071 scsi_print_inquiry_short(&path->device->inq_data);
1072 else if (path->device->protocol == PROTO_ATA ||
1073 path->device->protocol == PROTO_SATAPM)
1074 ata_print_ident_short(&path->device->ident_data);
1075 else if (path->device->protocol == PROTO_SEMB)
1076 semb_print_ident_short(
1077 (struct sep_identify_data *)&path->device->ident_data);
1079 printf("Unknown protocol device");
1080 if (path->device->serial_num_len > 0)
1081 printf(" s/n %.60s", path->device->serial_num);
1082 printf(" detached\n");
1087 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1090 struct ccb_dev_advinfo cdai;
1091 struct scsi_vpd_id_descriptor *idd;
1093 xpt_path_assert(path, MA_OWNED);
1095 memset(&cdai, 0, sizeof(cdai));
1096 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1097 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1100 if (!strcmp(attr, "GEOM::ident"))
1101 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1102 else if (!strcmp(attr, "GEOM::physpath"))
1103 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1104 else if (strcmp(attr, "GEOM::lunid") == 0 ||
1105 strcmp(attr, "GEOM::lunname") == 0) {
1106 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1107 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1111 cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT|M_ZERO);
1112 if (cdai.buf == NULL) {
1116 xpt_action((union ccb *)&cdai); /* can only be synchronous */
1117 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1118 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1119 if (cdai.provsiz == 0)
1121 if (cdai.buftype == CDAI_TYPE_SCSI_DEVID) {
1122 if (strcmp(attr, "GEOM::lunid") == 0) {
1123 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1124 cdai.provsiz, scsi_devid_is_lun_naa);
1126 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1127 cdai.provsiz, scsi_devid_is_lun_eui64);
1131 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1132 cdai.provsiz, scsi_devid_is_lun_t10);
1134 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1135 cdai.provsiz, scsi_devid_is_lun_name);
1139 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII ||
1140 (idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) {
1141 l = strnlen(idd->identifier, idd->length);
1143 bcopy(idd->identifier, buf, l);
1148 if (idd->length * 2 < len) {
1149 for (l = 0; l < idd->length; l++)
1150 sprintf(buf + l * 2, "%02x",
1151 idd->identifier[l]);
1157 if (strlcpy(buf, cdai.buf, len) >= len)
1162 if (cdai.buf != NULL)
1163 free(cdai.buf, M_CAMXPT);
1167 static dev_match_ret
1168 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1171 dev_match_ret retval;
1174 retval = DM_RET_NONE;
1177 * If we aren't given something to match against, that's an error.
1180 return(DM_RET_ERROR);
1183 * If there are no match entries, then this bus matches no
1186 if ((patterns == NULL) || (num_patterns == 0))
1187 return(DM_RET_DESCEND | DM_RET_COPY);
1189 for (i = 0; i < num_patterns; i++) {
1190 struct bus_match_pattern *cur_pattern;
1193 * If the pattern in question isn't for a bus node, we
1194 * aren't interested. However, we do indicate to the
1195 * calling routine that we should continue descending the
1196 * tree, since the user wants to match against lower-level
1199 if (patterns[i].type != DEV_MATCH_BUS) {
1200 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1201 retval |= DM_RET_DESCEND;
1205 cur_pattern = &patterns[i].pattern.bus_pattern;
1208 * If they want to match any bus node, we give them any
1211 if (cur_pattern->flags == BUS_MATCH_ANY) {
1212 /* set the copy flag */
1213 retval |= DM_RET_COPY;
1216 * If we've already decided on an action, go ahead
1219 if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
1224 * Not sure why someone would do this...
1226 if (cur_pattern->flags == BUS_MATCH_NONE)
1229 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1230 && (cur_pattern->path_id != bus->path_id))
1233 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1234 && (cur_pattern->bus_id != bus->sim->bus_id))
1237 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1238 && (cur_pattern->unit_number != bus->sim->unit_number))
1241 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1242 && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1247 * If we get to this point, the user definitely wants
1248 * information on this bus. So tell the caller to copy the
1251 retval |= DM_RET_COPY;
1254 * If the return action has been set to descend, then we
1255 * know that we've already seen a non-bus matching
1256 * expression, therefore we need to further descend the tree.
1257 * This won't change by continuing around the loop, so we
1258 * go ahead and return. If we haven't seen a non-bus
1259 * matching expression, we keep going around the loop until
1260 * we exhaust the matching expressions. We'll set the stop
1261 * flag once we fall out of the loop.
1263 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1268 * If the return action hasn't been set to descend yet, that means
1269 * we haven't seen anything other than bus matching patterns. So
1270 * tell the caller to stop descending the tree -- the user doesn't
1271 * want to match against lower level tree elements.
1273 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1274 retval |= DM_RET_STOP;
1279 static dev_match_ret
1280 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1281 struct cam_ed *device)
1283 dev_match_ret retval;
1286 retval = DM_RET_NONE;
1289 * If we aren't given something to match against, that's an error.
1292 return(DM_RET_ERROR);
1295 * If there are no match entries, then this device matches no
1298 if ((patterns == NULL) || (num_patterns == 0))
1299 return(DM_RET_DESCEND | DM_RET_COPY);
1301 for (i = 0; i < num_patterns; i++) {
1302 struct device_match_pattern *cur_pattern;
1303 struct scsi_vpd_device_id *device_id_page;
1306 * If the pattern in question isn't for a device node, we
1307 * aren't interested.
1309 if (patterns[i].type != DEV_MATCH_DEVICE) {
1310 if ((patterns[i].type == DEV_MATCH_PERIPH)
1311 && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1312 retval |= DM_RET_DESCEND;
1316 cur_pattern = &patterns[i].pattern.device_pattern;
1318 /* Error out if mutually exclusive options are specified. */
1319 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1320 == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1321 return(DM_RET_ERROR);
1324 * If they want to match any device node, we give them any
1327 if (cur_pattern->flags == DEV_MATCH_ANY)
1331 * Not sure why someone would do this...
1333 if (cur_pattern->flags == DEV_MATCH_NONE)
1336 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1337 && (cur_pattern->path_id != device->target->bus->path_id))
1340 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1341 && (cur_pattern->target_id != device->target->target_id))
1344 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1345 && (cur_pattern->target_lun != device->lun_id))
1348 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1349 && (cam_quirkmatch((caddr_t)&device->inq_data,
1350 (caddr_t)&cur_pattern->data.inq_pat,
1351 1, sizeof(cur_pattern->data.inq_pat),
1352 scsi_static_inquiry_match) == NULL))
1355 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1356 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1357 && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1358 || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1359 device->device_id_len
1360 - SVPD_DEVICE_ID_HDR_LEN,
1361 cur_pattern->data.devid_pat.id,
1362 cur_pattern->data.devid_pat.id_len) != 0))
1367 * If we get to this point, the user definitely wants
1368 * information on this device. So tell the caller to copy
1371 retval |= DM_RET_COPY;
1374 * If the return action has been set to descend, then we
1375 * know that we've already seen a peripheral matching
1376 * expression, therefore we need to further descend the tree.
1377 * This won't change by continuing around the loop, so we
1378 * go ahead and return. If we haven't seen a peripheral
1379 * matching expression, we keep going around the loop until
1380 * we exhaust the matching expressions. We'll set the stop
1381 * flag once we fall out of the loop.
1383 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1388 * If the return action hasn't been set to descend yet, that means
1389 * we haven't seen any peripheral matching patterns. So tell the
1390 * caller to stop descending the tree -- the user doesn't want to
1391 * match against lower level tree elements.
1393 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1394 retval |= DM_RET_STOP;
1400 * Match a single peripheral against any number of match patterns.
1402 static dev_match_ret
1403 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1404 struct cam_periph *periph)
1406 dev_match_ret retval;
1410 * If we aren't given something to match against, that's an error.
1413 return(DM_RET_ERROR);
1416 * If there are no match entries, then this peripheral matches no
1419 if ((patterns == NULL) || (num_patterns == 0))
1420 return(DM_RET_STOP | DM_RET_COPY);
1423 * There aren't any nodes below a peripheral node, so there's no
1424 * reason to descend the tree any further.
1426 retval = DM_RET_STOP;
1428 for (i = 0; i < num_patterns; i++) {
1429 struct periph_match_pattern *cur_pattern;
1432 * If the pattern in question isn't for a peripheral, we
1433 * aren't interested.
1435 if (patterns[i].type != DEV_MATCH_PERIPH)
1438 cur_pattern = &patterns[i].pattern.periph_pattern;
1441 * If they want to match on anything, then we will do so.
1443 if (cur_pattern->flags == PERIPH_MATCH_ANY) {
1444 /* set the copy flag */
1445 retval |= DM_RET_COPY;
1448 * We've already set the return action to stop,
1449 * since there are no nodes below peripherals in
1456 * Not sure why someone would do this...
1458 if (cur_pattern->flags == PERIPH_MATCH_NONE)
1461 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1462 && (cur_pattern->path_id != periph->path->bus->path_id))
1466 * For the target and lun id's, we have to make sure the
1467 * target and lun pointers aren't NULL. The xpt peripheral
1468 * has a wildcard target and device.
1470 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1471 && ((periph->path->target == NULL)
1472 ||(cur_pattern->target_id != periph->path->target->target_id)))
1475 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1476 && ((periph->path->device == NULL)
1477 || (cur_pattern->target_lun != periph->path->device->lun_id)))
1480 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1481 && (cur_pattern->unit_number != periph->unit_number))
1484 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1485 && (strncmp(cur_pattern->periph_name, periph->periph_name,
1490 * If we get to this point, the user definitely wants
1491 * information on this peripheral. So tell the caller to
1492 * copy the data out.
1494 retval |= DM_RET_COPY;
1497 * The return action has already been set to stop, since
1498 * peripherals don't have any nodes below them in the EDT.
1504 * If we get to this point, the peripheral that was passed in
1505 * doesn't match any of the patterns.
1511 xptedtbusfunc(struct cam_eb *bus, void *arg)
1513 struct ccb_dev_match *cdm;
1514 struct cam_et *target;
1515 dev_match_ret retval;
1517 cdm = (struct ccb_dev_match *)arg;
1520 * If our position is for something deeper in the tree, that means
1521 * that we've already seen this node. So, we keep going down.
1523 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1524 && (cdm->pos.cookie.bus == bus)
1525 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1526 && (cdm->pos.cookie.target != NULL))
1527 retval = DM_RET_DESCEND;
1529 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1532 * If we got an error, bail out of the search.
1534 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1535 cdm->status = CAM_DEV_MATCH_ERROR;
1540 * If the copy flag is set, copy this bus out.
1542 if (retval & DM_RET_COPY) {
1545 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1546 sizeof(struct dev_match_result));
1549 * If we don't have enough space to put in another
1550 * match result, save our position and tell the
1551 * user there are more devices to check.
1553 if (spaceleft < sizeof(struct dev_match_result)) {
1554 bzero(&cdm->pos, sizeof(cdm->pos));
1555 cdm->pos.position_type =
1556 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1558 cdm->pos.cookie.bus = bus;
1559 cdm->pos.generations[CAM_BUS_GENERATION]=
1560 xsoftc.bus_generation;
1561 cdm->status = CAM_DEV_MATCH_MORE;
1564 j = cdm->num_matches;
1566 cdm->matches[j].type = DEV_MATCH_BUS;
1567 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1568 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1569 cdm->matches[j].result.bus_result.unit_number =
1570 bus->sim->unit_number;
1571 strncpy(cdm->matches[j].result.bus_result.dev_name,
1572 bus->sim->sim_name, DEV_IDLEN);
1576 * If the user is only interested in busses, there's no
1577 * reason to descend to the next level in the tree.
1579 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1583 * If there is a target generation recorded, check it to
1584 * make sure the target list hasn't changed.
1586 mtx_lock(&bus->eb_mtx);
1587 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1588 && (cdm->pos.cookie.bus == bus)
1589 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1590 && (cdm->pos.cookie.target != NULL)) {
1591 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1593 mtx_unlock(&bus->eb_mtx);
1594 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1597 target = (struct cam_et *)cdm->pos.cookie.target;
1601 mtx_unlock(&bus->eb_mtx);
1603 return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1607 xptedttargetfunc(struct cam_et *target, void *arg)
1609 struct ccb_dev_match *cdm;
1611 struct cam_ed *device;
1613 cdm = (struct ccb_dev_match *)arg;
1617 * If there is a device list generation recorded, check it to
1618 * make sure the device list hasn't changed.
1620 mtx_lock(&bus->eb_mtx);
1621 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1622 && (cdm->pos.cookie.bus == bus)
1623 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1624 && (cdm->pos.cookie.target == target)
1625 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1626 && (cdm->pos.cookie.device != NULL)) {
1627 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1628 target->generation) {
1629 mtx_unlock(&bus->eb_mtx);
1630 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1633 device = (struct cam_ed *)cdm->pos.cookie.device;
1637 mtx_unlock(&bus->eb_mtx);
1639 return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1643 xptedtdevicefunc(struct cam_ed *device, void *arg)
1646 struct cam_periph *periph;
1647 struct ccb_dev_match *cdm;
1648 dev_match_ret retval;
1650 cdm = (struct ccb_dev_match *)arg;
1651 bus = device->target->bus;
1654 * If our position is for something deeper in the tree, that means
1655 * that we've already seen this node. So, we keep going down.
1657 if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1658 && (cdm->pos.cookie.device == device)
1659 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1660 && (cdm->pos.cookie.periph != NULL))
1661 retval = DM_RET_DESCEND;
1663 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1666 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1667 cdm->status = CAM_DEV_MATCH_ERROR;
1672 * If the copy flag is set, copy this device out.
1674 if (retval & DM_RET_COPY) {
1677 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1678 sizeof(struct dev_match_result));
1681 * If we don't have enough space to put in another
1682 * match result, save our position and tell the
1683 * user there are more devices to check.
1685 if (spaceleft < sizeof(struct dev_match_result)) {
1686 bzero(&cdm->pos, sizeof(cdm->pos));
1687 cdm->pos.position_type =
1688 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1689 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1691 cdm->pos.cookie.bus = device->target->bus;
1692 cdm->pos.generations[CAM_BUS_GENERATION]=
1693 xsoftc.bus_generation;
1694 cdm->pos.cookie.target = device->target;
1695 cdm->pos.generations[CAM_TARGET_GENERATION] =
1696 device->target->bus->generation;
1697 cdm->pos.cookie.device = device;
1698 cdm->pos.generations[CAM_DEV_GENERATION] =
1699 device->target->generation;
1700 cdm->status = CAM_DEV_MATCH_MORE;
1703 j = cdm->num_matches;
1705 cdm->matches[j].type = DEV_MATCH_DEVICE;
1706 cdm->matches[j].result.device_result.path_id =
1707 device->target->bus->path_id;
1708 cdm->matches[j].result.device_result.target_id =
1709 device->target->target_id;
1710 cdm->matches[j].result.device_result.target_lun =
1712 cdm->matches[j].result.device_result.protocol =
1714 bcopy(&device->inq_data,
1715 &cdm->matches[j].result.device_result.inq_data,
1716 sizeof(struct scsi_inquiry_data));
1717 bcopy(&device->ident_data,
1718 &cdm->matches[j].result.device_result.ident_data,
1719 sizeof(struct ata_params));
1721 /* Let the user know whether this device is unconfigured */
1722 if (device->flags & CAM_DEV_UNCONFIGURED)
1723 cdm->matches[j].result.device_result.flags =
1724 DEV_RESULT_UNCONFIGURED;
1726 cdm->matches[j].result.device_result.flags =
1731 * If the user isn't interested in peripherals, don't descend
1732 * the tree any further.
1734 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1738 * If there is a peripheral list generation recorded, make sure
1739 * it hasn't changed.
1742 mtx_lock(&bus->eb_mtx);
1743 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1744 && (cdm->pos.cookie.bus == bus)
1745 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1746 && (cdm->pos.cookie.target == device->target)
1747 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1748 && (cdm->pos.cookie.device == device)
1749 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1750 && (cdm->pos.cookie.periph != NULL)) {
1751 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1752 device->generation) {
1753 mtx_unlock(&bus->eb_mtx);
1755 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1758 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1762 mtx_unlock(&bus->eb_mtx);
1765 return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1769 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1771 struct ccb_dev_match *cdm;
1772 dev_match_ret retval;
1774 cdm = (struct ccb_dev_match *)arg;
1776 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1778 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1779 cdm->status = CAM_DEV_MATCH_ERROR;
1784 * If the copy flag is set, copy this peripheral out.
1786 if (retval & DM_RET_COPY) {
1789 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1790 sizeof(struct dev_match_result));
1793 * If we don't have enough space to put in another
1794 * match result, save our position and tell the
1795 * user there are more devices to check.
1797 if (spaceleft < sizeof(struct dev_match_result)) {
1798 bzero(&cdm->pos, sizeof(cdm->pos));
1799 cdm->pos.position_type =
1800 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1801 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
1804 cdm->pos.cookie.bus = periph->path->bus;
1805 cdm->pos.generations[CAM_BUS_GENERATION]=
1806 xsoftc.bus_generation;
1807 cdm->pos.cookie.target = periph->path->target;
1808 cdm->pos.generations[CAM_TARGET_GENERATION] =
1809 periph->path->bus->generation;
1810 cdm->pos.cookie.device = periph->path->device;
1811 cdm->pos.generations[CAM_DEV_GENERATION] =
1812 periph->path->target->generation;
1813 cdm->pos.cookie.periph = periph;
1814 cdm->pos.generations[CAM_PERIPH_GENERATION] =
1815 periph->path->device->generation;
1816 cdm->status = CAM_DEV_MATCH_MORE;
1820 j = cdm->num_matches;
1822 cdm->matches[j].type = DEV_MATCH_PERIPH;
1823 cdm->matches[j].result.periph_result.path_id =
1824 periph->path->bus->path_id;
1825 cdm->matches[j].result.periph_result.target_id =
1826 periph->path->target->target_id;
1827 cdm->matches[j].result.periph_result.target_lun =
1828 periph->path->device->lun_id;
1829 cdm->matches[j].result.periph_result.unit_number =
1830 periph->unit_number;
1831 strncpy(cdm->matches[j].result.periph_result.periph_name,
1832 periph->periph_name, DEV_IDLEN);
1839 xptedtmatch(struct ccb_dev_match *cdm)
1844 cdm->num_matches = 0;
1847 * Check the bus list generation. If it has changed, the user
1848 * needs to reset everything and start over.
1851 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1852 && (cdm->pos.cookie.bus != NULL)) {
1853 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
1854 xsoftc.bus_generation) {
1856 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1859 bus = (struct cam_eb *)cdm->pos.cookie.bus;
1865 ret = xptbustraverse(bus, xptedtbusfunc, cdm);
1868 * If we get back 0, that means that we had to stop before fully
1869 * traversing the EDT. It also means that one of the subroutines
1870 * has set the status field to the proper value. If we get back 1,
1871 * we've fully traversed the EDT and copied out any matching entries.
1874 cdm->status = CAM_DEV_MATCH_LAST;
1880 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
1882 struct cam_periph *periph;
1883 struct ccb_dev_match *cdm;
1885 cdm = (struct ccb_dev_match *)arg;
1888 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
1889 && (cdm->pos.cookie.pdrv == pdrv)
1890 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1891 && (cdm->pos.cookie.periph != NULL)) {
1892 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1893 (*pdrv)->generation) {
1895 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1898 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1904 return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
1908 xptplistperiphfunc(struct cam_periph *periph, void *arg)
1910 struct ccb_dev_match *cdm;
1911 dev_match_ret retval;
1913 cdm = (struct ccb_dev_match *)arg;
1915 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1917 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1918 cdm->status = CAM_DEV_MATCH_ERROR;
1923 * If the copy flag is set, copy this peripheral out.
1925 if (retval & DM_RET_COPY) {
1928 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1929 sizeof(struct dev_match_result));
1932 * If we don't have enough space to put in another
1933 * match result, save our position and tell the
1934 * user there are more devices to check.
1936 if (spaceleft < sizeof(struct dev_match_result)) {
1937 struct periph_driver **pdrv;
1940 bzero(&cdm->pos, sizeof(cdm->pos));
1941 cdm->pos.position_type =
1942 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
1946 * This may look a bit non-sensical, but it is
1947 * actually quite logical. There are very few
1948 * peripheral drivers, and bloating every peripheral
1949 * structure with a pointer back to its parent
1950 * peripheral driver linker set entry would cost
1951 * more in the long run than doing this quick lookup.
1953 for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
1954 if (strcmp((*pdrv)->driver_name,
1955 periph->periph_name) == 0)
1959 if (*pdrv == NULL) {
1960 cdm->status = CAM_DEV_MATCH_ERROR;
1964 cdm->pos.cookie.pdrv = pdrv;
1966 * The periph generation slot does double duty, as
1967 * does the periph pointer slot. They are used for
1968 * both edt and pdrv lookups and positioning.
1970 cdm->pos.cookie.periph = periph;
1971 cdm->pos.generations[CAM_PERIPH_GENERATION] =
1972 (*pdrv)->generation;
1973 cdm->status = CAM_DEV_MATCH_MORE;
1977 j = cdm->num_matches;
1979 cdm->matches[j].type = DEV_MATCH_PERIPH;
1980 cdm->matches[j].result.periph_result.path_id =
1981 periph->path->bus->path_id;
1984 * The transport layer peripheral doesn't have a target or
1987 if (periph->path->target)
1988 cdm->matches[j].result.periph_result.target_id =
1989 periph->path->target->target_id;
1991 cdm->matches[j].result.periph_result.target_id =
1992 CAM_TARGET_WILDCARD;
1994 if (periph->path->device)
1995 cdm->matches[j].result.periph_result.target_lun =
1996 periph->path->device->lun_id;
1998 cdm->matches[j].result.periph_result.target_lun =
2001 cdm->matches[j].result.periph_result.unit_number =
2002 periph->unit_number;
2003 strncpy(cdm->matches[j].result.periph_result.periph_name,
2004 periph->periph_name, DEV_IDLEN);
2011 xptperiphlistmatch(struct ccb_dev_match *cdm)
2015 cdm->num_matches = 0;
2018 * At this point in the edt traversal function, we check the bus
2019 * list generation to make sure that no busses have been added or
2020 * removed since the user last sent a XPT_DEV_MATCH ccb through.
2021 * For the peripheral driver list traversal function, however, we
2022 * don't have to worry about new peripheral driver types coming or
2023 * going; they're in a linker set, and therefore can't change
2024 * without a recompile.
2027 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2028 && (cdm->pos.cookie.pdrv != NULL))
2029 ret = xptpdrvtraverse(
2030 (struct periph_driver **)cdm->pos.cookie.pdrv,
2031 xptplistpdrvfunc, cdm);
2033 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2036 * If we get back 0, that means that we had to stop before fully
2037 * traversing the peripheral driver tree. It also means that one of
2038 * the subroutines has set the status field to the proper value. If
2039 * we get back 1, we've fully traversed the EDT and copied out any
2043 cdm->status = CAM_DEV_MATCH_LAST;
2049 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2051 struct cam_eb *bus, *next_bus;
2059 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2067 for (; bus != NULL; bus = next_bus) {
2068 retval = tr_func(bus, arg);
2070 xpt_release_bus(bus);
2074 next_bus = TAILQ_NEXT(bus, links);
2076 next_bus->refcount++;
2078 xpt_release_bus(bus);
2084 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2085 xpt_targetfunc_t *tr_func, void *arg)
2087 struct cam_et *target, *next_target;
2092 target = start_target;
2094 mtx_lock(&bus->eb_mtx);
2095 target = TAILQ_FIRST(&bus->et_entries);
2096 if (target == NULL) {
2097 mtx_unlock(&bus->eb_mtx);
2101 mtx_unlock(&bus->eb_mtx);
2103 for (; target != NULL; target = next_target) {
2104 retval = tr_func(target, arg);
2106 xpt_release_target(target);
2109 mtx_lock(&bus->eb_mtx);
2110 next_target = TAILQ_NEXT(target, links);
2112 next_target->refcount++;
2113 mtx_unlock(&bus->eb_mtx);
2114 xpt_release_target(target);
2120 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2121 xpt_devicefunc_t *tr_func, void *arg)
2124 struct cam_ed *device, *next_device;
2130 device = start_device;
2132 mtx_lock(&bus->eb_mtx);
2133 device = TAILQ_FIRST(&target->ed_entries);
2134 if (device == NULL) {
2135 mtx_unlock(&bus->eb_mtx);
2139 mtx_unlock(&bus->eb_mtx);
2141 for (; device != NULL; device = next_device) {
2142 mtx_lock(&device->device_mtx);
2143 retval = tr_func(device, arg);
2144 mtx_unlock(&device->device_mtx);
2146 xpt_release_device(device);
2149 mtx_lock(&bus->eb_mtx);
2150 next_device = TAILQ_NEXT(device, links);
2152 next_device->refcount++;
2153 mtx_unlock(&bus->eb_mtx);
2154 xpt_release_device(device);
2160 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2161 xpt_periphfunc_t *tr_func, void *arg)
2164 struct cam_periph *periph, *next_periph;
2169 bus = device->target->bus;
2171 periph = start_periph;
2174 mtx_lock(&bus->eb_mtx);
2175 periph = SLIST_FIRST(&device->periphs);
2176 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2177 periph = SLIST_NEXT(periph, periph_links);
2178 if (periph == NULL) {
2179 mtx_unlock(&bus->eb_mtx);
2184 mtx_unlock(&bus->eb_mtx);
2187 for (; periph != NULL; periph = next_periph) {
2188 retval = tr_func(periph, arg);
2190 cam_periph_release_locked(periph);
2194 mtx_lock(&bus->eb_mtx);
2195 next_periph = SLIST_NEXT(periph, periph_links);
2196 while (next_periph != NULL &&
2197 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2198 next_periph = SLIST_NEXT(next_periph, periph_links);
2200 next_periph->refcount++;
2201 mtx_unlock(&bus->eb_mtx);
2203 cam_periph_release_locked(periph);
2209 xptpdrvtraverse(struct periph_driver **start_pdrv,
2210 xpt_pdrvfunc_t *tr_func, void *arg)
2212 struct periph_driver **pdrv;
2218 * We don't traverse the peripheral driver list like we do the
2219 * other lists, because it is a linker set, and therefore cannot be
2220 * changed during runtime. If the peripheral driver list is ever
2221 * re-done to be something other than a linker set (i.e. it can
2222 * change while the system is running), the list traversal should
2223 * be modified to work like the other traversal functions.
2225 for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2226 *pdrv != NULL; pdrv++) {
2227 retval = tr_func(pdrv, arg);
2237 xptpdperiphtraverse(struct periph_driver **pdrv,
2238 struct cam_periph *start_periph,
2239 xpt_periphfunc_t *tr_func, void *arg)
2241 struct cam_periph *periph, *next_periph;
2247 periph = start_periph;
2250 periph = TAILQ_FIRST(&(*pdrv)->units);
2251 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2252 periph = TAILQ_NEXT(periph, unit_links);
2253 if (periph == NULL) {
2260 for (; periph != NULL; periph = next_periph) {
2261 cam_periph_lock(periph);
2262 retval = tr_func(periph, arg);
2263 cam_periph_unlock(periph);
2265 cam_periph_release(periph);
2269 next_periph = TAILQ_NEXT(periph, unit_links);
2270 while (next_periph != NULL &&
2271 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2272 next_periph = TAILQ_NEXT(next_periph, unit_links);
2274 next_periph->refcount++;
2276 cam_periph_release(periph);
2282 xptdefbusfunc(struct cam_eb *bus, void *arg)
2284 struct xpt_traverse_config *tr_config;
2286 tr_config = (struct xpt_traverse_config *)arg;
2288 if (tr_config->depth == XPT_DEPTH_BUS) {
2289 xpt_busfunc_t *tr_func;
2291 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2293 return(tr_func(bus, tr_config->tr_arg));
2295 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2299 xptdeftargetfunc(struct cam_et *target, void *arg)
2301 struct xpt_traverse_config *tr_config;
2303 tr_config = (struct xpt_traverse_config *)arg;
2305 if (tr_config->depth == XPT_DEPTH_TARGET) {
2306 xpt_targetfunc_t *tr_func;
2308 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2310 return(tr_func(target, tr_config->tr_arg));
2312 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2316 xptdefdevicefunc(struct cam_ed *device, void *arg)
2318 struct xpt_traverse_config *tr_config;
2320 tr_config = (struct xpt_traverse_config *)arg;
2322 if (tr_config->depth == XPT_DEPTH_DEVICE) {
2323 xpt_devicefunc_t *tr_func;
2325 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2327 return(tr_func(device, tr_config->tr_arg));
2329 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2333 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2335 struct xpt_traverse_config *tr_config;
2336 xpt_periphfunc_t *tr_func;
2338 tr_config = (struct xpt_traverse_config *)arg;
2340 tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2343 * Unlike the other default functions, we don't check for depth
2344 * here. The peripheral driver level is the last level in the EDT,
2345 * so if we're here, we should execute the function in question.
2347 return(tr_func(periph, tr_config->tr_arg));
2351 * Execute the given function for every bus in the EDT.
2354 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2356 struct xpt_traverse_config tr_config;
2358 tr_config.depth = XPT_DEPTH_BUS;
2359 tr_config.tr_func = tr_func;
2360 tr_config.tr_arg = arg;
2362 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2366 * Execute the given function for every device in the EDT.
2369 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2371 struct xpt_traverse_config tr_config;
2373 tr_config.depth = XPT_DEPTH_DEVICE;
2374 tr_config.tr_func = tr_func;
2375 tr_config.tr_arg = arg;
2377 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2381 xptsetasyncfunc(struct cam_ed *device, void *arg)
2383 struct cam_path path;
2384 struct ccb_getdev cgd;
2385 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2388 * Don't report unconfigured devices (Wildcard devs,
2389 * devices only for target mode, device instances
2390 * that have been invalidated but are waiting for
2391 * their last reference count to be released).
2393 if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2396 xpt_compile_path(&path,
2398 device->target->bus->path_id,
2399 device->target->target_id,
2401 xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2402 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2403 xpt_action((union ccb *)&cgd);
2404 csa->callback(csa->callback_arg,
2407 xpt_release_path(&path);
2413 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2415 struct cam_path path;
2416 struct ccb_pathinq cpi;
2417 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2419 xpt_compile_path(&path, /*periph*/NULL,
2421 CAM_TARGET_WILDCARD,
2423 xpt_path_lock(&path);
2424 xpt_setup_ccb(&cpi.ccb_h, &path, CAM_PRIORITY_NORMAL);
2425 cpi.ccb_h.func_code = XPT_PATH_INQ;
2426 xpt_action((union ccb *)&cpi);
2427 csa->callback(csa->callback_arg,
2430 xpt_path_unlock(&path);
2431 xpt_release_path(&path);
2437 xpt_action(union ccb *start_ccb)
2440 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_action\n"));
2442 start_ccb->ccb_h.status = CAM_REQ_INPROG;
2443 (*(start_ccb->ccb_h.path->bus->xport->action))(start_ccb);
2447 xpt_action_default(union ccb *start_ccb)
2449 struct cam_path *path;
2450 struct cam_sim *sim;
2453 path = start_ccb->ccb_h.path;
2454 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_action_default\n"));
2456 switch (start_ccb->ccb_h.func_code) {
2459 struct cam_ed *device;
2462 * For the sake of compatibility with SCSI-1
2463 * devices that may not understand the identify
2464 * message, we include lun information in the
2465 * second byte of all commands. SCSI-1 specifies
2466 * that luns are a 3 bit value and reserves only 3
2467 * bits for lun information in the CDB. Later
2468 * revisions of the SCSI spec allow for more than 8
2469 * luns, but have deprecated lun information in the
2470 * CDB. So, if the lun won't fit, we must omit.
2472 * Also be aware that during initial probing for devices,
2473 * the inquiry information is unknown but initialized to 0.
2474 * This means that this code will be exercised while probing
2475 * devices with an ANSI revision greater than 2.
2477 device = path->device;
2478 if (device->protocol_version <= SCSI_REV_2
2479 && start_ccb->ccb_h.target_lun < 8
2480 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2482 start_ccb->csio.cdb_io.cdb_bytes[1] |=
2483 start_ccb->ccb_h.target_lun << 5;
2485 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2489 case XPT_CONT_TARGET_IO:
2490 start_ccb->csio.sense_resid = 0;
2491 start_ccb->csio.resid = 0;
2494 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2495 start_ccb->ataio.resid = 0;
2501 struct cam_devq *devq;
2503 devq = path->bus->sim->devq;
2504 mtx_lock(&devq->send_mtx);
2505 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2506 if (xpt_schedule_devq(devq, path->device) != 0)
2508 mtx_unlock(&devq->send_mtx);
2511 case XPT_CALC_GEOMETRY:
2512 /* Filter out garbage */
2513 if (start_ccb->ccg.block_size == 0
2514 || start_ccb->ccg.volume_size == 0) {
2515 start_ccb->ccg.cylinders = 0;
2516 start_ccb->ccg.heads = 0;
2517 start_ccb->ccg.secs_per_track = 0;
2518 start_ccb->ccb_h.status = CAM_REQ_CMP;
2521 #if defined(PC98) || defined(__sparc64__)
2523 * In a PC-98 system, geometry translation depens on
2524 * the "real" device geometry obtained from mode page 4.
2525 * SCSI geometry translation is performed in the
2526 * initialization routine of the SCSI BIOS and the result
2527 * stored in host memory. If the translation is available
2528 * in host memory, use it. If not, rely on the default
2529 * translation the device driver performs.
2530 * For sparc64, we may need adjust the geometry of large
2531 * disks in order to fit the limitations of the 16-bit
2532 * fields of the VTOC8 disk label.
2534 if (scsi_da_bios_params(&start_ccb->ccg) != 0) {
2535 start_ccb->ccb_h.status = CAM_REQ_CMP;
2542 union ccb* abort_ccb;
2544 abort_ccb = start_ccb->cab.abort_ccb;
2545 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2547 if (abort_ccb->ccb_h.pinfo.index >= 0) {
2548 struct cam_ccbq *ccbq;
2549 struct cam_ed *device;
2551 device = abort_ccb->ccb_h.path->device;
2552 ccbq = &device->ccbq;
2553 cam_ccbq_remove_ccb(ccbq, abort_ccb);
2554 abort_ccb->ccb_h.status =
2555 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2556 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2557 xpt_done(abort_ccb);
2558 start_ccb->ccb_h.status = CAM_REQ_CMP;
2561 if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2562 && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2564 * We've caught this ccb en route to
2565 * the SIM. Flag it for abort and the
2566 * SIM will do so just before starting
2567 * real work on the CCB.
2569 abort_ccb->ccb_h.status =
2570 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2571 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2572 start_ccb->ccb_h.status = CAM_REQ_CMP;
2576 if (XPT_FC_IS_QUEUED(abort_ccb)
2577 && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2579 * It's already completed but waiting
2580 * for our SWI to get to it.
2582 start_ccb->ccb_h.status = CAM_UA_ABORT;
2586 * If we weren't able to take care of the abort request
2587 * in the XPT, pass the request down to the SIM for processing.
2591 case XPT_ACCEPT_TARGET_IO:
2593 case XPT_IMMED_NOTIFY:
2594 case XPT_NOTIFY_ACK:
2596 case XPT_IMMEDIATE_NOTIFY:
2597 case XPT_NOTIFY_ACKNOWLEDGE:
2598 case XPT_GET_SIM_KNOB:
2599 case XPT_SET_SIM_KNOB:
2600 case XPT_GET_TRAN_SETTINGS:
2601 case XPT_SET_TRAN_SETTINGS:
2604 sim = path->bus->sim;
2605 lock = (mtx_owned(sim->mtx) == 0);
2608 (*(sim->sim_action))(sim, start_ccb);
2610 CAM_SIM_UNLOCK(sim);
2612 case XPT_PATH_STATS:
2613 start_ccb->cpis.last_reset = path->bus->last_reset;
2614 start_ccb->ccb_h.status = CAM_REQ_CMP;
2621 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2622 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2624 struct ccb_getdev *cgd;
2626 cgd = &start_ccb->cgd;
2627 cgd->protocol = dev->protocol;
2628 cgd->inq_data = dev->inq_data;
2629 cgd->ident_data = dev->ident_data;
2630 cgd->inq_flags = dev->inq_flags;
2631 cgd->ccb_h.status = CAM_REQ_CMP;
2632 cgd->serial_num_len = dev->serial_num_len;
2633 if ((dev->serial_num_len > 0)
2634 && (dev->serial_num != NULL))
2635 bcopy(dev->serial_num, cgd->serial_num,
2636 dev->serial_num_len);
2640 case XPT_GDEV_STATS:
2645 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2646 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2648 struct ccb_getdevstats *cgds;
2651 struct cam_devq *devq;
2653 cgds = &start_ccb->cgds;
2656 devq = bus->sim->devq;
2657 mtx_lock(&devq->send_mtx);
2658 cgds->dev_openings = dev->ccbq.dev_openings;
2659 cgds->dev_active = dev->ccbq.dev_active;
2660 cgds->allocated = dev->ccbq.allocated;
2661 cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2662 cgds->held = cgds->allocated - cgds->dev_active -
2664 cgds->last_reset = tar->last_reset;
2665 cgds->maxtags = dev->maxtags;
2666 cgds->mintags = dev->mintags;
2667 if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2668 cgds->last_reset = bus->last_reset;
2669 mtx_unlock(&devq->send_mtx);
2670 cgds->ccb_h.status = CAM_REQ_CMP;
2676 struct cam_periph *nperiph;
2677 struct periph_list *periph_head;
2678 struct ccb_getdevlist *cgdl;
2680 struct cam_ed *device;
2687 * Don't want anyone mucking with our data.
2689 device = path->device;
2690 periph_head = &device->periphs;
2691 cgdl = &start_ccb->cgdl;
2694 * Check and see if the list has changed since the user
2695 * last requested a list member. If so, tell them that the
2696 * list has changed, and therefore they need to start over
2697 * from the beginning.
2699 if ((cgdl->index != 0) &&
2700 (cgdl->generation != device->generation)) {
2701 cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2706 * Traverse the list of peripherals and attempt to find
2707 * the requested peripheral.
2709 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2710 (nperiph != NULL) && (i <= cgdl->index);
2711 nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2712 if (i == cgdl->index) {
2713 strncpy(cgdl->periph_name,
2714 nperiph->periph_name,
2716 cgdl->unit_number = nperiph->unit_number;
2721 cgdl->status = CAM_GDEVLIST_ERROR;
2725 if (nperiph == NULL)
2726 cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2728 cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2731 cgdl->generation = device->generation;
2733 cgdl->ccb_h.status = CAM_REQ_CMP;
2738 dev_pos_type position_type;
2739 struct ccb_dev_match *cdm;
2741 cdm = &start_ccb->cdm;
2744 * There are two ways of getting at information in the EDT.
2745 * The first way is via the primary EDT tree. It starts
2746 * with a list of busses, then a list of targets on a bus,
2747 * then devices/luns on a target, and then peripherals on a
2748 * device/lun. The "other" way is by the peripheral driver
2749 * lists. The peripheral driver lists are organized by
2750 * peripheral driver. (obviously) So it makes sense to
2751 * use the peripheral driver list if the user is looking
2752 * for something like "da1", or all "da" devices. If the
2753 * user is looking for something on a particular bus/target
2754 * or lun, it's generally better to go through the EDT tree.
2757 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2758 position_type = cdm->pos.position_type;
2762 position_type = CAM_DEV_POS_NONE;
2764 for (i = 0; i < cdm->num_patterns; i++) {
2765 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2766 ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2767 position_type = CAM_DEV_POS_EDT;
2772 if (cdm->num_patterns == 0)
2773 position_type = CAM_DEV_POS_EDT;
2774 else if (position_type == CAM_DEV_POS_NONE)
2775 position_type = CAM_DEV_POS_PDRV;
2778 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2779 case CAM_DEV_POS_EDT:
2782 case CAM_DEV_POS_PDRV:
2783 xptperiphlistmatch(cdm);
2786 cdm->status = CAM_DEV_MATCH_ERROR;
2790 if (cdm->status == CAM_DEV_MATCH_ERROR)
2791 start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2793 start_ccb->ccb_h.status = CAM_REQ_CMP;
2799 struct ccb_setasync *csa;
2800 struct async_node *cur_entry;
2801 struct async_list *async_head;
2804 csa = &start_ccb->csa;
2805 added = csa->event_enable;
2806 async_head = &path->device->asyncs;
2809 * If there is already an entry for us, simply
2812 cur_entry = SLIST_FIRST(async_head);
2813 while (cur_entry != NULL) {
2814 if ((cur_entry->callback_arg == csa->callback_arg)
2815 && (cur_entry->callback == csa->callback))
2817 cur_entry = SLIST_NEXT(cur_entry, links);
2820 if (cur_entry != NULL) {
2822 * If the request has no flags set,
2825 added &= ~cur_entry->event_enable;
2826 if (csa->event_enable == 0) {
2827 SLIST_REMOVE(async_head, cur_entry,
2829 xpt_release_device(path->device);
2830 free(cur_entry, M_CAMXPT);
2832 cur_entry->event_enable = csa->event_enable;
2834 csa->event_enable = added;
2836 cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
2838 if (cur_entry == NULL) {
2839 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
2842 cur_entry->event_enable = csa->event_enable;
2843 cur_entry->event_lock =
2844 mtx_owned(path->bus->sim->mtx) ? 1 : 0;
2845 cur_entry->callback_arg = csa->callback_arg;
2846 cur_entry->callback = csa->callback;
2847 SLIST_INSERT_HEAD(async_head, cur_entry, links);
2848 xpt_acquire_device(path->device);
2850 start_ccb->ccb_h.status = CAM_REQ_CMP;
2855 struct ccb_relsim *crs;
2858 crs = &start_ccb->crs;
2862 crs->ccb_h.status = CAM_DEV_NOT_THERE;
2866 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
2868 /* Don't ever go below one opening */
2869 if (crs->openings > 0) {
2870 xpt_dev_ccbq_resize(path, crs->openings);
2873 "number of openings is now %d\n",
2879 mtx_lock(&dev->sim->devq->send_mtx);
2880 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
2882 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
2885 * Just extend the old timeout and decrement
2886 * the freeze count so that a single timeout
2887 * is sufficient for releasing the queue.
2889 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2890 callout_stop(&dev->callout);
2893 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2896 callout_reset_sbt(&dev->callout,
2897 SBT_1MS * crs->release_timeout, 0,
2898 xpt_release_devq_timeout, dev, 0);
2900 dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
2904 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
2906 if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
2908 * Decrement the freeze count so that a single
2909 * completion is still sufficient to unfreeze
2912 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2915 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
2916 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2920 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
2922 if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
2923 || (dev->ccbq.dev_active == 0)) {
2925 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2928 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
2929 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2932 mtx_unlock(&dev->sim->devq->send_mtx);
2934 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
2935 xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
2936 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
2937 start_ccb->ccb_h.status = CAM_REQ_CMP;
2941 struct cam_path *oldpath;
2943 /* Check that all request bits are supported. */
2944 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
2945 start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
2949 cam_dflags = CAM_DEBUG_NONE;
2950 if (cam_dpath != NULL) {
2951 oldpath = cam_dpath;
2953 xpt_free_path(oldpath);
2955 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
2956 if (xpt_create_path(&cam_dpath, NULL,
2957 start_ccb->ccb_h.path_id,
2958 start_ccb->ccb_h.target_id,
2959 start_ccb->ccb_h.target_lun) !=
2961 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
2963 cam_dflags = start_ccb->cdbg.flags;
2964 start_ccb->ccb_h.status = CAM_REQ_CMP;
2965 xpt_print(cam_dpath, "debugging flags now %x\n",
2969 start_ccb->ccb_h.status = CAM_REQ_CMP;
2973 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
2974 xpt_freeze_devq(path, 1);
2975 start_ccb->ccb_h.status = CAM_REQ_CMP;
2982 printf("%s: CCB type %#x not supported\n", __func__,
2983 start_ccb->ccb_h.func_code);
2984 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
2985 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
2986 xpt_done(start_ccb);
2993 xpt_polled_action(union ccb *start_ccb)
2996 struct cam_sim *sim;
2997 struct cam_devq *devq;
3000 timeout = start_ccb->ccb_h.timeout * 10;
3001 sim = start_ccb->ccb_h.path->bus->sim;
3003 dev = start_ccb->ccb_h.path->device;
3005 mtx_unlock(&dev->device_mtx);
3008 * Steal an opening so that no other queued requests
3009 * can get it before us while we simulate interrupts.
3011 mtx_lock(&devq->send_mtx);
3012 dev->ccbq.dev_openings--;
3013 while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3015 mtx_unlock(&devq->send_mtx);
3018 (*(sim->sim_poll))(sim);
3019 CAM_SIM_UNLOCK(sim);
3021 mtx_lock(&devq->send_mtx);
3023 dev->ccbq.dev_openings++;
3024 mtx_unlock(&devq->send_mtx);
3027 xpt_action(start_ccb);
3028 while(--timeout > 0) {
3030 (*(sim->sim_poll))(sim);
3031 CAM_SIM_UNLOCK(sim);
3033 if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
3040 * XXX Is it worth adding a sim_timeout entry
3041 * point so we can attempt recovery? If
3042 * this is only used for dumps, I don't think
3045 start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3048 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3051 mtx_lock(&dev->device_mtx);
3055 * Schedule a peripheral driver to receive a ccb when its
3056 * target device has space for more transactions.
3059 xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
3062 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3063 cam_periph_assert(periph, MA_OWNED);
3064 if (new_priority < periph->scheduled_priority) {
3065 periph->scheduled_priority = new_priority;
3066 xpt_run_allocq(periph, 0);
3072 * Schedule a device to run on a given queue.
3073 * If the device was inserted as a new entry on the queue,
3074 * return 1 meaning the device queue should be run. If we
3075 * were already queued, implying someone else has already
3076 * started the queue, return 0 so the caller doesn't attempt
3080 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3081 u_int32_t new_priority)
3084 u_int32_t old_priority;
3086 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3088 old_priority = pinfo->priority;
3091 * Are we already queued?
3093 if (pinfo->index != CAM_UNQUEUED_INDEX) {
3094 /* Simply reorder based on new priority */
3095 if (new_priority < old_priority) {
3096 camq_change_priority(queue, pinfo->index,
3098 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3099 ("changed priority to %d\n",
3105 /* New entry on the queue */
3106 if (new_priority < old_priority)
3107 pinfo->priority = new_priority;
3109 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3110 ("Inserting onto queue\n"));
3111 pinfo->generation = ++queue->generation;
3112 camq_insert(queue, pinfo);
3119 xpt_run_allocq_task(void *context, int pending)
3121 struct cam_periph *periph = context;
3123 cam_periph_lock(periph);
3124 periph->flags &= ~CAM_PERIPH_RUN_TASK;
3125 xpt_run_allocq(periph, 1);
3126 cam_periph_unlock(periph);
3127 cam_periph_release(periph);
3131 xpt_run_allocq(struct cam_periph *periph, int sleep)
3133 struct cam_ed *device;
3137 cam_periph_assert(periph, MA_OWNED);
3138 if (periph->periph_allocating)
3140 periph->periph_allocating = 1;
3141 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3142 device = periph->path->device;
3145 while ((prio = min(periph->scheduled_priority,
3146 periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3147 (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3148 device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3151 (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3153 ccb = xpt_get_ccb(periph);
3156 if (periph->flags & CAM_PERIPH_RUN_TASK)
3158 cam_periph_doacquire(periph);
3159 periph->flags |= CAM_PERIPH_RUN_TASK;
3160 taskqueue_enqueue(xsoftc.xpt_taskq,
3161 &periph->periph_run_task);
3164 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3165 if (prio == periph->immediate_priority) {
3166 periph->immediate_priority = CAM_PRIORITY_NONE;
3167 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3168 ("waking cam_periph_getccb()\n"));
3169 SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3171 wakeup(&periph->ccb_list);
3173 periph->scheduled_priority = CAM_PRIORITY_NONE;
3174 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3175 ("calling periph_start()\n"));
3176 periph->periph_start(periph, ccb);
3181 xpt_release_ccb(ccb);
3182 periph->periph_allocating = 0;
3186 xpt_run_devq(struct cam_devq *devq)
3188 char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
3191 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3193 devq->send_queue.qfrozen_cnt++;
3194 while ((devq->send_queue.entries > 0)
3195 && (devq->send_openings > 0)
3196 && (devq->send_queue.qfrozen_cnt <= 1)) {
3197 struct cam_ed *device;
3198 union ccb *work_ccb;
3199 struct cam_sim *sim;
3201 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3203 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3204 ("running device %p\n", device));
3206 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3207 if (work_ccb == NULL) {
3208 printf("device on run queue with no ccbs???\n");
3212 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3214 mtx_lock(&xsoftc.xpt_highpower_lock);
3215 if (xsoftc.num_highpower <= 0) {
3217 * We got a high power command, but we
3218 * don't have any available slots. Freeze
3219 * the device queue until we have a slot
3222 xpt_freeze_devq_device(device, 1);
3223 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3226 mtx_unlock(&xsoftc.xpt_highpower_lock);
3230 * Consume a high power slot while
3233 xsoftc.num_highpower--;
3235 mtx_unlock(&xsoftc.xpt_highpower_lock);
3237 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3238 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3239 devq->send_openings--;
3240 devq->send_active++;
3241 xpt_schedule_devq(devq, device);
3242 mtx_unlock(&devq->send_mtx);
3244 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3246 * The client wants to freeze the queue
3247 * after this CCB is sent.
3249 xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3252 /* In Target mode, the peripheral driver knows best... */
3253 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3254 if ((device->inq_flags & SID_CmdQue) != 0
3255 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3256 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3259 * Clear this in case of a retried CCB that
3260 * failed due to a rejected tag.
3262 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3265 switch (work_ccb->ccb_h.func_code) {
3267 CAM_DEBUG(work_ccb->ccb_h.path,
3268 CAM_DEBUG_CDB,("%s. CDB: %s\n",
3269 scsi_op_desc(work_ccb->csio.cdb_io.cdb_bytes[0],
3271 scsi_cdb_string(work_ccb->csio.cdb_io.cdb_bytes,
3272 cdb_str, sizeof(cdb_str))));
3275 CAM_DEBUG(work_ccb->ccb_h.path,
3276 CAM_DEBUG_CDB,("%s. ACB: %s\n",
3277 ata_op_string(&work_ccb->ataio.cmd),
3278 ata_cmd_string(&work_ccb->ataio.cmd,
3279 cdb_str, sizeof(cdb_str))));
3286 * Device queues can be shared among multiple SIM instances
3287 * that reside on different busses. Use the SIM from the
3288 * queued device, rather than the one from the calling bus.
3291 lock = (mtx_owned(sim->mtx) == 0);
3294 (*(sim->sim_action))(sim, work_ccb);
3296 CAM_SIM_UNLOCK(sim);
3297 mtx_lock(&devq->send_mtx);
3299 devq->send_queue.qfrozen_cnt--;
3303 * This function merges stuff from the slave ccb into the master ccb, while
3304 * keeping important fields in the master ccb constant.
3307 xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb)
3311 * Pull fields that are valid for peripheral drivers to set
3312 * into the master CCB along with the CCB "payload".
3314 master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count;
3315 master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code;
3316 master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout;
3317 master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags;
3318 bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1],
3319 sizeof(union ccb) - sizeof(struct ccb_hdr));
3323 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
3326 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3327 ccb_h->pinfo.priority = priority;
3329 ccb_h->path_id = path->bus->path_id;
3331 ccb_h->target_id = path->target->target_id;
3333 ccb_h->target_id = CAM_TARGET_WILDCARD;
3335 ccb_h->target_lun = path->device->lun_id;
3336 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3338 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3340 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3345 /* Path manipulation functions */
3347 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3348 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3350 struct cam_path *path;
3353 path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3356 status = CAM_RESRC_UNAVAIL;
3359 status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3360 if (status != CAM_REQ_CMP) {
3361 free(path, M_CAMPATH);
3364 *new_path_ptr = path;
3369 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3370 struct cam_periph *periph, path_id_t path_id,
3371 target_id_t target_id, lun_id_t lun_id)
3374 return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3379 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3380 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3383 struct cam_et *target;
3384 struct cam_ed *device;
3387 status = CAM_REQ_CMP; /* Completed without error */
3388 target = NULL; /* Wildcarded */
3389 device = NULL; /* Wildcarded */
3392 * We will potentially modify the EDT, so block interrupts
3393 * that may attempt to create cam paths.
3395 bus = xpt_find_bus(path_id);
3397 status = CAM_PATH_INVALID;
3400 mtx_lock(&bus->eb_mtx);
3401 target = xpt_find_target(bus, target_id);
3402 if (target == NULL) {
3404 struct cam_et *new_target;
3406 new_target = xpt_alloc_target(bus, target_id);
3407 if (new_target == NULL) {
3408 status = CAM_RESRC_UNAVAIL;
3410 target = new_target;
3414 if (target != NULL) {
3415 device = xpt_find_device(target, lun_id);
3416 if (device == NULL) {
3418 struct cam_ed *new_device;
3421 (*(bus->xport->alloc_device))(bus,
3424 if (new_device == NULL) {
3425 status = CAM_RESRC_UNAVAIL;
3427 device = new_device;
3431 mtx_unlock(&bus->eb_mtx);
3435 * Only touch the user's data if we are successful.
3437 if (status == CAM_REQ_CMP) {
3438 new_path->periph = perph;
3439 new_path->bus = bus;
3440 new_path->target = target;
3441 new_path->device = device;
3442 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3445 xpt_release_device(device);
3447 xpt_release_target(target);
3449 xpt_release_bus(bus);
3455 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3457 struct cam_path *new_path;
3459 new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3460 if (new_path == NULL)
3461 return(CAM_RESRC_UNAVAIL);
3462 xpt_copy_path(new_path, path);
3463 *new_path_ptr = new_path;
3464 return (CAM_REQ_CMP);
3468 xpt_copy_path(struct cam_path *new_path, struct cam_path *path)
3472 if (path->bus != NULL)
3473 xpt_acquire_bus(path->bus);
3474 if (path->target != NULL)
3475 xpt_acquire_target(path->target);
3476 if (path->device != NULL)
3477 xpt_acquire_device(path->device);
3481 xpt_release_path(struct cam_path *path)
3483 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3484 if (path->device != NULL) {
3485 xpt_release_device(path->device);
3486 path->device = NULL;
3488 if (path->target != NULL) {
3489 xpt_release_target(path->target);
3490 path->target = NULL;
3492 if (path->bus != NULL) {
3493 xpt_release_bus(path->bus);
3499 xpt_free_path(struct cam_path *path)
3502 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3503 xpt_release_path(path);
3504 free(path, M_CAMPATH);
3508 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3509 uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3515 *bus_ref = path->bus->refcount;
3521 *periph_ref = path->periph->refcount;
3528 *target_ref = path->target->refcount;
3534 *device_ref = path->device->refcount;
3541 * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3542 * in path1, 2 for match with wildcards in path2.
3545 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3549 if (path1->bus != path2->bus) {
3550 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3552 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3557 if (path1->target != path2->target) {
3558 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3561 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3566 if (path1->device != path2->device) {
3567 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3570 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3579 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3583 if (path->bus != dev->target->bus) {
3584 if (path->bus->path_id == CAM_BUS_WILDCARD)
3586 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3591 if (path->target != dev->target) {
3592 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3595 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3600 if (path->device != dev) {
3601 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3604 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3613 xpt_print_path(struct cam_path *path)
3617 printf("(nopath): ");
3619 if (path->periph != NULL)
3620 printf("(%s%d:", path->periph->periph_name,
3621 path->periph->unit_number);
3623 printf("(noperiph:");
3625 if (path->bus != NULL)
3626 printf("%s%d:%d:", path->bus->sim->sim_name,
3627 path->bus->sim->unit_number,
3628 path->bus->sim->bus_id);
3632 if (path->target != NULL)
3633 printf("%d:", path->target->target_id);
3637 if (path->device != NULL)
3638 printf("%jx): ", (uintmax_t)path->device->lun_id);
3645 xpt_print_device(struct cam_ed *device)
3649 printf("(nopath): ");
3651 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3652 device->sim->unit_number,
3653 device->sim->bus_id,
3654 device->target->target_id,
3655 (uintmax_t)device->lun_id);
3660 xpt_print(struct cam_path *path, const char *fmt, ...)
3663 xpt_print_path(path);
3670 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3674 sbuf_new(&sb, str, str_len, 0);
3677 sbuf_printf(&sb, "(nopath): ");
3679 if (path->periph != NULL)
3680 sbuf_printf(&sb, "(%s%d:", path->periph->periph_name,
3681 path->periph->unit_number);
3683 sbuf_printf(&sb, "(noperiph:");
3685 if (path->bus != NULL)
3686 sbuf_printf(&sb, "%s%d:%d:", path->bus->sim->sim_name,
3687 path->bus->sim->unit_number,
3688 path->bus->sim->bus_id);
3690 sbuf_printf(&sb, "nobus:");
3692 if (path->target != NULL)
3693 sbuf_printf(&sb, "%d:", path->target->target_id);
3695 sbuf_printf(&sb, "X:");
3697 if (path->device != NULL)
3698 sbuf_printf(&sb, "%jx): ",
3699 (uintmax_t)path->device->lun_id);
3701 sbuf_printf(&sb, "X): ");
3705 return(sbuf_len(&sb));
3709 xpt_path_path_id(struct cam_path *path)
3711 return(path->bus->path_id);
3715 xpt_path_target_id(struct cam_path *path)
3717 if (path->target != NULL)
3718 return (path->target->target_id);
3720 return (CAM_TARGET_WILDCARD);
3724 xpt_path_lun_id(struct cam_path *path)
3726 if (path->device != NULL)
3727 return (path->device->lun_id);
3729 return (CAM_LUN_WILDCARD);
3733 xpt_path_sim(struct cam_path *path)
3736 return (path->bus->sim);
3740 xpt_path_periph(struct cam_path *path)
3743 return (path->periph);
3747 xpt_path_legacy_ata_id(struct cam_path *path)
3752 if ((strcmp(path->bus->sim->sim_name, "ata") != 0) &&
3753 strcmp(path->bus->sim->sim_name, "ahcich") != 0 &&
3754 strcmp(path->bus->sim->sim_name, "mvsch") != 0 &&
3755 strcmp(path->bus->sim->sim_name, "siisch") != 0)
3758 if (strcmp(path->bus->sim->sim_name, "ata") == 0 &&
3759 path->bus->sim->unit_number < 2) {
3760 bus_id = path->bus->sim->unit_number;
3764 TAILQ_FOREACH(bus, &xsoftc.xpt_busses, links) {
3765 if (bus == path->bus)
3767 if ((strcmp(bus->sim->sim_name, "ata") == 0 &&
3768 bus->sim->unit_number >= 2) ||
3769 strcmp(bus->sim->sim_name, "ahcich") == 0 ||
3770 strcmp(bus->sim->sim_name, "mvsch") == 0 ||
3771 strcmp(bus->sim->sim_name, "siisch") == 0)
3776 if (path->target != NULL) {
3777 if (path->target->target_id < 2)
3778 return (bus_id * 2 + path->target->target_id);
3782 return (bus_id * 2);
3786 * Release a CAM control block for the caller. Remit the cost of the structure
3787 * to the device referenced by the path. If the this device had no 'credits'
3788 * and peripheral drivers have registered async callbacks for this notification
3792 xpt_release_ccb(union ccb *free_ccb)
3794 struct cam_ed *device;
3795 struct cam_periph *periph;
3797 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
3798 xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
3799 device = free_ccb->ccb_h.path->device;
3800 periph = free_ccb->ccb_h.path->periph;
3802 xpt_free_ccb(free_ccb);
3803 periph->periph_allocated--;
3804 cam_ccbq_release_opening(&device->ccbq);
3805 xpt_run_allocq(periph, 0);
3808 /* Functions accessed by SIM drivers */
3810 static struct xpt_xport xport_default = {
3811 .alloc_device = xpt_alloc_device_default,
3812 .action = xpt_action_default,
3813 .async = xpt_dev_async_default,
3817 * A sim structure, listing the SIM entry points and instance
3818 * identification info is passed to xpt_bus_register to hook the SIM
3819 * into the CAM framework. xpt_bus_register creates a cam_eb entry
3820 * for this new bus and places it in the array of busses and assigns
3821 * it a path_id. The path_id may be influenced by "hard wiring"
3822 * information specified by the user. Once interrupt services are
3823 * available, the bus will be probed.
3826 xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
3828 struct cam_eb *new_bus;
3829 struct cam_eb *old_bus;
3830 struct ccb_pathinq cpi;
3831 struct cam_path *path;
3834 mtx_assert(sim->mtx, MA_OWNED);
3837 new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
3838 M_CAMXPT, M_NOWAIT|M_ZERO);
3839 if (new_bus == NULL) {
3840 /* Couldn't satisfy request */
3841 return (CAM_RESRC_UNAVAIL);
3844 mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
3845 TAILQ_INIT(&new_bus->et_entries);
3848 timevalclear(&new_bus->last_reset);
3850 new_bus->refcount = 1; /* Held until a bus_deregister event */
3851 new_bus->generation = 0;
3854 sim->path_id = new_bus->path_id =
3855 xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
3856 old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3857 while (old_bus != NULL
3858 && old_bus->path_id < new_bus->path_id)
3859 old_bus = TAILQ_NEXT(old_bus, links);
3860 if (old_bus != NULL)
3861 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
3863 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
3864 xsoftc.bus_generation++;
3868 * Set a default transport so that a PATH_INQ can be issued to
3869 * the SIM. This will then allow for probing and attaching of
3870 * a more appropriate transport.
3872 new_bus->xport = &xport_default;
3874 status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
3875 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3876 if (status != CAM_REQ_CMP) {
3877 xpt_release_bus(new_bus);
3878 free(path, M_CAMXPT);
3879 return (CAM_RESRC_UNAVAIL);
3882 xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL);
3883 cpi.ccb_h.func_code = XPT_PATH_INQ;
3884 xpt_action((union ccb *)&cpi);
3886 if (cpi.ccb_h.status == CAM_REQ_CMP) {
3887 switch (cpi.transport) {
3895 new_bus->xport = scsi_get_xport();
3899 new_bus->xport = ata_get_xport();
3902 new_bus->xport = &xport_default;
3907 /* Notify interested parties */
3908 if (sim->path_id != CAM_XPT_PATH_ID) {
3910 xpt_async(AC_PATH_REGISTERED, path, &cpi);
3911 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
3912 union ccb *scan_ccb;
3914 /* Initiate bus rescan. */
3915 scan_ccb = xpt_alloc_ccb_nowait();
3916 if (scan_ccb != NULL) {
3917 scan_ccb->ccb_h.path = path;
3918 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
3919 scan_ccb->crcn.flags = 0;
3920 xpt_rescan(scan_ccb);
3923 "Can't allocate CCB to scan bus\n");
3924 xpt_free_path(path);
3927 xpt_free_path(path);
3929 xpt_free_path(path);
3930 return (CAM_SUCCESS);
3934 xpt_bus_deregister(path_id_t pathid)
3936 struct cam_path bus_path;
3939 status = xpt_compile_path(&bus_path, NULL, pathid,
3940 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3941 if (status != CAM_REQ_CMP)
3944 xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
3945 xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
3947 /* Release the reference count held while registered. */
3948 xpt_release_bus(bus_path.bus);
3949 xpt_release_path(&bus_path);
3951 return (CAM_REQ_CMP);
3955 xptnextfreepathid(void)
3961 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
3963 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3965 /* Find an unoccupied pathid */
3966 while (bus != NULL && bus->path_id <= pathid) {
3967 if (bus->path_id == pathid)
3969 bus = TAILQ_NEXT(bus, links);
3973 * Ensure that this pathid is not reserved for
3974 * a bus that may be registered in the future.
3976 if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
3978 /* Start the search over */
3985 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
3992 pathid = CAM_XPT_PATH_ID;
3993 snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
3994 if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
3997 while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
3998 if (strcmp(dname, "scbus")) {
3999 /* Avoid a bit of foot shooting. */
4002 if (dunit < 0) /* unwired?! */
4004 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
4005 if (sim_bus == val) {
4009 } else if (sim_bus == 0) {
4010 /* Unspecified matches bus 0 */
4014 printf("Ambiguous scbus configuration for %s%d "
4015 "bus %d, cannot wire down. The kernel "
4016 "config entry for scbus%d should "
4017 "specify a controller bus.\n"
4018 "Scbus will be assigned dynamically.\n",
4019 sim_name, sim_unit, sim_bus, dunit);
4024 if (pathid == CAM_XPT_PATH_ID)
4025 pathid = xptnextfreepathid();
4030 xpt_async_string(u_int32_t async_code)
4033 switch (async_code) {
4034 case AC_BUS_RESET: return ("AC_BUS_RESET");
4035 case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4036 case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4037 case AC_SENT_BDR: return ("AC_SENT_BDR");
4038 case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4039 case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4040 case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4041 case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4042 case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4043 case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4044 case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4045 case AC_CONTRACT: return ("AC_CONTRACT");
4046 case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4047 case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4049 return ("AC_UNKNOWN");
4053 xpt_async_size(u_int32_t async_code)
4056 switch (async_code) {
4057 case AC_BUS_RESET: return (0);
4058 case AC_UNSOL_RESEL: return (0);
4059 case AC_SCSI_AEN: return (0);
4060 case AC_SENT_BDR: return (0);
4061 case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4062 case AC_PATH_DEREGISTERED: return (0);
4063 case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4064 case AC_LOST_DEVICE: return (0);
4065 case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4066 case AC_INQ_CHANGED: return (0);
4067 case AC_GETDEV_CHANGED: return (0);
4068 case AC_CONTRACT: return (sizeof(struct ac_contract));
4069 case AC_ADVINFO_CHANGED: return (-1);
4070 case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4076 xpt_async_process_dev(struct cam_ed *device, void *arg)
4078 union ccb *ccb = arg;
4079 struct cam_path *path = ccb->ccb_h.path;
4080 void *async_arg = ccb->casync.async_arg_ptr;
4081 u_int32_t async_code = ccb->casync.async_code;
4084 if (path->device != device
4085 && path->device->lun_id != CAM_LUN_WILDCARD
4086 && device->lun_id != CAM_LUN_WILDCARD)
4090 * The async callback could free the device.
4091 * If it is a broadcast async, it doesn't hold
4092 * device reference, so take our own reference.
4094 xpt_acquire_device(device);
4097 * If async for specific device is to be delivered to
4098 * the wildcard client, take the specific device lock.
4099 * XXX: We may need a way for client to specify it.
4101 if ((device->lun_id == CAM_LUN_WILDCARD &&
4102 path->device->lun_id != CAM_LUN_WILDCARD) ||
4103 (device->target->target_id == CAM_TARGET_WILDCARD &&
4104 path->target->target_id != CAM_TARGET_WILDCARD) ||
4105 (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4106 path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4107 mtx_unlock(&device->device_mtx);
4108 xpt_path_lock(path);
4113 (*(device->target->bus->xport->async))(async_code,
4114 device->target->bus, device->target, device, async_arg);
4115 xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4118 xpt_path_unlock(path);
4119 mtx_lock(&device->device_mtx);
4121 xpt_release_device(device);
4126 xpt_async_process_tgt(struct cam_et *target, void *arg)
4128 union ccb *ccb = arg;
4129 struct cam_path *path = ccb->ccb_h.path;
4131 if (path->target != target
4132 && path->target->target_id != CAM_TARGET_WILDCARD
4133 && target->target_id != CAM_TARGET_WILDCARD)
4136 if (ccb->casync.async_code == AC_SENT_BDR) {
4137 /* Update our notion of when the last reset occurred */
4138 microtime(&target->last_reset);
4141 return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4145 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4148 struct cam_path *path;
4150 u_int32_t async_code;
4152 path = ccb->ccb_h.path;
4153 async_code = ccb->casync.async_code;
4154 async_arg = ccb->casync.async_arg_ptr;
4155 CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4156 ("xpt_async(%s)\n", xpt_async_string(async_code)));
4159 if (async_code == AC_BUS_RESET) {
4160 /* Update our notion of when the last reset occurred */
4161 microtime(&bus->last_reset);
4164 xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4167 * If this wasn't a fully wildcarded async, tell all
4168 * clients that want all async events.
4170 if (bus != xpt_periph->path->bus) {
4171 xpt_path_lock(xpt_periph->path);
4172 xpt_async_process_dev(xpt_periph->path->device, ccb);
4173 xpt_path_unlock(xpt_periph->path);
4176 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4177 xpt_release_devq(path, 1, TRUE);
4179 xpt_release_simq(path->bus->sim, TRUE);
4180 if (ccb->casync.async_arg_size > 0)
4181 free(async_arg, M_CAMXPT);
4182 xpt_free_path(path);
4187 xpt_async_bcast(struct async_list *async_head,
4188 u_int32_t async_code,
4189 struct cam_path *path, void *async_arg)
4191 struct async_node *cur_entry;
4194 cur_entry = SLIST_FIRST(async_head);
4195 while (cur_entry != NULL) {
4196 struct async_node *next_entry;
4198 * Grab the next list entry before we call the current
4199 * entry's callback. This is because the callback function
4200 * can delete its async callback entry.
4202 next_entry = SLIST_NEXT(cur_entry, links);
4203 if ((cur_entry->event_enable & async_code) != 0) {
4204 lock = cur_entry->event_lock;
4206 CAM_SIM_LOCK(path->device->sim);
4207 cur_entry->callback(cur_entry->callback_arg,
4211 CAM_SIM_UNLOCK(path->device->sim);
4213 cur_entry = next_entry;
4218 xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
4223 ccb = xpt_alloc_ccb_nowait();
4225 xpt_print(path, "Can't allocate CCB to send %s\n",
4226 xpt_async_string(async_code));
4230 if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
4231 xpt_print(path, "Can't allocate path to send %s\n",
4232 xpt_async_string(async_code));
4236 ccb->ccb_h.path->periph = NULL;
4237 ccb->ccb_h.func_code = XPT_ASYNC;
4238 ccb->ccb_h.cbfcnp = xpt_async_process;
4239 ccb->ccb_h.flags |= CAM_UNLOCKED;
4240 ccb->casync.async_code = async_code;
4241 ccb->casync.async_arg_size = 0;
4242 size = xpt_async_size(async_code);
4243 if (size > 0 && async_arg != NULL) {
4244 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4245 if (ccb->casync.async_arg_ptr == NULL) {
4246 xpt_print(path, "Can't allocate argument to send %s\n",
4247 xpt_async_string(async_code));
4248 xpt_free_path(ccb->ccb_h.path);
4252 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4253 ccb->casync.async_arg_size = size;
4254 } else if (size < 0)
4255 ccb->casync.async_arg_size = size;
4256 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4257 xpt_freeze_devq(path, 1);
4259 xpt_freeze_simq(path->bus->sim, 1);
4264 xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
4265 struct cam_et *target, struct cam_ed *device,
4270 * We only need to handle events for real devices.
4272 if (target->target_id == CAM_TARGET_WILDCARD
4273 || device->lun_id == CAM_LUN_WILDCARD)
4276 printf("%s called\n", __func__);
4280 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4282 struct cam_devq *devq;
4285 devq = dev->sim->devq;
4286 mtx_assert(&devq->send_mtx, MA_OWNED);
4287 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4288 ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4289 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4290 freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4291 /* Remove frozen device from sendq. */
4292 if (device_is_queued(dev))
4293 camq_remove(&devq->send_queue, dev->devq_entry.index);
4298 xpt_freeze_devq(struct cam_path *path, u_int count)
4300 struct cam_ed *dev = path->device;
4301 struct cam_devq *devq;
4304 devq = dev->sim->devq;
4305 mtx_lock(&devq->send_mtx);
4306 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4307 freeze = xpt_freeze_devq_device(dev, count);
4308 mtx_unlock(&devq->send_mtx);
4313 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4315 struct cam_devq *devq;
4319 mtx_lock(&devq->send_mtx);
4320 freeze = (devq->send_queue.qfrozen_cnt += count);
4321 mtx_unlock(&devq->send_mtx);
4326 xpt_release_devq_timeout(void *arg)
4329 struct cam_devq *devq;
4331 dev = (struct cam_ed *)arg;
4332 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4333 devq = dev->sim->devq;
4334 mtx_assert(&devq->send_mtx, MA_OWNED);
4335 if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4340 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4343 struct cam_devq *devq;
4345 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4348 devq = dev->sim->devq;
4349 mtx_lock(&devq->send_mtx);
4350 if (xpt_release_devq_device(dev, count, run_queue))
4351 xpt_run_devq(dev->sim->devq);
4352 mtx_unlock(&devq->send_mtx);
4356 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4359 mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4360 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4361 ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4362 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4363 if (count > dev->ccbq.queue.qfrozen_cnt) {
4365 printf("xpt_release_devq(): requested %u > present %u\n",
4366 count, dev->ccbq.queue.qfrozen_cnt);
4368 count = dev->ccbq.queue.qfrozen_cnt;
4370 dev->ccbq.queue.qfrozen_cnt -= count;
4371 if (dev->ccbq.queue.qfrozen_cnt == 0) {
4373 * No longer need to wait for a successful
4374 * command completion.
4376 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4378 * Remove any timeouts that might be scheduled
4379 * to release this queue.
4381 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4382 callout_stop(&dev->callout);
4383 dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4386 * Now that we are unfrozen schedule the
4387 * device so any pending transactions are
4390 xpt_schedule_devq(dev->sim->devq, dev);
4397 xpt_release_simq(struct cam_sim *sim, int run_queue)
4399 struct cam_devq *devq;
4402 mtx_lock(&devq->send_mtx);
4403 if (devq->send_queue.qfrozen_cnt <= 0) {
4405 printf("xpt_release_simq: requested 1 > present %u\n",
4406 devq->send_queue.qfrozen_cnt);
4409 devq->send_queue.qfrozen_cnt--;
4410 if (devq->send_queue.qfrozen_cnt == 0) {
4412 * If there is a timeout scheduled to release this
4413 * sim queue, remove it. The queue frozen count is
4416 if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
4417 callout_stop(&sim->callout);
4418 sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
4422 * Now that we are unfrozen run the send queue.
4424 xpt_run_devq(sim->devq);
4427 mtx_unlock(&devq->send_mtx);
4431 * XXX Appears to be unused.
4434 xpt_release_simq_timeout(void *arg)
4436 struct cam_sim *sim;
4438 sim = (struct cam_sim *)arg;
4439 xpt_release_simq(sim, /* run_queue */ TRUE);
4443 xpt_done(union ccb *done_ccb)
4445 struct cam_doneq *queue;
4448 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done\n"));
4449 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4452 hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4453 done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4454 queue = &cam_doneqs[hash];
4455 mtx_lock(&queue->cam_doneq_mtx);
4456 run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4457 STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4458 done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4459 mtx_unlock(&queue->cam_doneq_mtx);
4461 wakeup(&queue->cam_doneq);
4465 xpt_done_direct(union ccb *done_ccb)
4468 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done_direct\n"));
4469 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4472 xpt_done_process(&done_ccb->ccb_h);
4480 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4485 xpt_alloc_ccb_nowait()
4489 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4494 xpt_free_ccb(union ccb *free_ccb)
4496 free(free_ccb, M_CAMCCB);
4501 /* Private XPT functions */
4504 * Get a CAM control block for the caller. Charge the structure to the device
4505 * referenced by the path. If we don't have sufficient resources to allocate
4506 * more ccbs, we return NULL.
4509 xpt_get_ccb_nowait(struct cam_periph *periph)
4513 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_NOWAIT);
4514 if (new_ccb == NULL)
4516 periph->periph_allocated++;
4517 cam_ccbq_take_opening(&periph->path->device->ccbq);
4522 xpt_get_ccb(struct cam_periph *periph)
4526 cam_periph_unlock(periph);
4527 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_WAITOK);
4528 cam_periph_lock(periph);
4529 periph->periph_allocated++;
4530 cam_ccbq_take_opening(&periph->path->device->ccbq);
4535 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
4537 struct ccb_hdr *ccb_h;
4539 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4540 cam_periph_assert(periph, MA_OWNED);
4541 while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4542 ccb_h->pinfo.priority != priority) {
4543 if (priority < periph->immediate_priority) {
4544 periph->immediate_priority = priority;
4545 xpt_run_allocq(periph, 0);
4547 cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4550 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4551 return ((union ccb *)ccb_h);
4555 xpt_acquire_bus(struct cam_eb *bus)
4564 xpt_release_bus(struct cam_eb *bus)
4568 KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4569 if (--bus->refcount > 0) {
4573 TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4574 xsoftc.bus_generation++;
4576 KASSERT(TAILQ_EMPTY(&bus->et_entries),
4577 ("destroying bus, but target list is not empty"));
4578 cam_sim_release(bus->sim);
4579 mtx_destroy(&bus->eb_mtx);
4580 free(bus, M_CAMXPT);
4583 static struct cam_et *
4584 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4586 struct cam_et *cur_target, *target;
4588 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4589 mtx_assert(&bus->eb_mtx, MA_OWNED);
4590 target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4595 TAILQ_INIT(&target->ed_entries);
4597 target->target_id = target_id;
4598 target->refcount = 1;
4599 target->generation = 0;
4600 target->luns = NULL;
4601 mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4602 timevalclear(&target->last_reset);
4604 * Hold a reference to our parent bus so it
4605 * will not go away before we do.
4609 /* Insertion sort into our bus's target list */
4610 cur_target = TAILQ_FIRST(&bus->et_entries);
4611 while (cur_target != NULL && cur_target->target_id < target_id)
4612 cur_target = TAILQ_NEXT(cur_target, links);
4613 if (cur_target != NULL) {
4614 TAILQ_INSERT_BEFORE(cur_target, target, links);
4616 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4623 xpt_acquire_target(struct cam_et *target)
4625 struct cam_eb *bus = target->bus;
4627 mtx_lock(&bus->eb_mtx);
4629 mtx_unlock(&bus->eb_mtx);
4633 xpt_release_target(struct cam_et *target)
4635 struct cam_eb *bus = target->bus;
4637 mtx_lock(&bus->eb_mtx);
4638 if (--target->refcount > 0) {
4639 mtx_unlock(&bus->eb_mtx);
4642 TAILQ_REMOVE(&bus->et_entries, target, links);
4644 mtx_unlock(&bus->eb_mtx);
4645 KASSERT(TAILQ_EMPTY(&target->ed_entries),
4646 ("destroying target, but device list is not empty"));
4647 xpt_release_bus(bus);
4648 mtx_destroy(&target->luns_mtx);
4650 free(target->luns, M_CAMXPT);
4651 free(target, M_CAMXPT);
4654 static struct cam_ed *
4655 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4658 struct cam_ed *device;
4660 device = xpt_alloc_device(bus, target, lun_id);
4664 device->mintags = 1;
4665 device->maxtags = 1;
4670 xpt_destroy_device(void *context, int pending)
4672 struct cam_ed *device = context;
4674 mtx_lock(&device->device_mtx);
4675 mtx_destroy(&device->device_mtx);
4676 free(device, M_CAMDEV);
4680 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4682 struct cam_ed *cur_device, *device;
4683 struct cam_devq *devq;
4686 mtx_assert(&bus->eb_mtx, MA_OWNED);
4687 /* Make space for us in the device queue on our bus */
4688 devq = bus->sim->devq;
4689 mtx_lock(&devq->send_mtx);
4690 status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4691 mtx_unlock(&devq->send_mtx);
4692 if (status != CAM_REQ_CMP)
4695 device = (struct cam_ed *)malloc(sizeof(*device),
4696 M_CAMDEV, M_NOWAIT|M_ZERO);
4700 cam_init_pinfo(&device->devq_entry);
4701 device->target = target;
4702 device->lun_id = lun_id;
4703 device->sim = bus->sim;
4704 if (cam_ccbq_init(&device->ccbq,
4705 bus->sim->max_dev_openings) != 0) {
4706 free(device, M_CAMDEV);
4709 SLIST_INIT(&device->asyncs);
4710 SLIST_INIT(&device->periphs);
4711 device->generation = 0;
4712 device->flags = CAM_DEV_UNCONFIGURED;
4713 device->tag_delay_count = 0;
4714 device->tag_saved_openings = 0;
4715 device->refcount = 1;
4716 mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4717 callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4718 TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4720 * Hold a reference to our parent bus so it
4721 * will not go away before we do.
4725 cur_device = TAILQ_FIRST(&target->ed_entries);
4726 while (cur_device != NULL && cur_device->lun_id < lun_id)
4727 cur_device = TAILQ_NEXT(cur_device, links);
4728 if (cur_device != NULL)
4729 TAILQ_INSERT_BEFORE(cur_device, device, links);
4731 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4732 target->generation++;
4737 xpt_acquire_device(struct cam_ed *device)
4739 struct cam_eb *bus = device->target->bus;
4741 mtx_lock(&bus->eb_mtx);
4743 mtx_unlock(&bus->eb_mtx);
4747 xpt_release_device(struct cam_ed *device)
4749 struct cam_eb *bus = device->target->bus;
4750 struct cam_devq *devq;
4752 mtx_lock(&bus->eb_mtx);
4753 if (--device->refcount > 0) {
4754 mtx_unlock(&bus->eb_mtx);
4758 TAILQ_REMOVE(&device->target->ed_entries, device,links);
4759 device->target->generation++;
4760 mtx_unlock(&bus->eb_mtx);
4762 /* Release our slot in the devq */
4763 devq = bus->sim->devq;
4764 mtx_lock(&devq->send_mtx);
4765 cam_devq_resize(devq, devq->send_queue.array_size - 1);
4766 mtx_unlock(&devq->send_mtx);
4768 KASSERT(SLIST_EMPTY(&device->periphs),
4769 ("destroying device, but periphs list is not empty"));
4770 KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4771 ("destroying device while still queued for ccbs"));
4773 if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4774 callout_stop(&device->callout);
4776 xpt_release_target(device->target);
4778 cam_ccbq_fini(&device->ccbq);
4780 * Free allocated memory. free(9) does nothing if the
4781 * supplied pointer is NULL, so it is safe to call without
4784 free(device->supported_vpds, M_CAMXPT);
4785 free(device->device_id, M_CAMXPT);
4786 free(device->physpath, M_CAMXPT);
4787 free(device->rcap_buf, M_CAMXPT);
4788 free(device->serial_num, M_CAMXPT);
4789 taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
4793 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
4799 mtx_lock(&dev->sim->devq->send_mtx);
4800 result = cam_ccbq_resize(&dev->ccbq, newopenings);
4801 mtx_unlock(&dev->sim->devq->send_mtx);
4802 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
4803 || (dev->inq_flags & SID_CmdQue) != 0)
4804 dev->tag_saved_openings = newopenings;
4808 static struct cam_eb *
4809 xpt_find_bus(path_id_t path_id)
4814 for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4816 bus = TAILQ_NEXT(bus, links)) {
4817 if (bus->path_id == path_id) {
4826 static struct cam_et *
4827 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
4829 struct cam_et *target;
4831 mtx_assert(&bus->eb_mtx, MA_OWNED);
4832 for (target = TAILQ_FIRST(&bus->et_entries);
4834 target = TAILQ_NEXT(target, links)) {
4835 if (target->target_id == target_id) {
4843 static struct cam_ed *
4844 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
4846 struct cam_ed *device;
4848 mtx_assert(&target->bus->eb_mtx, MA_OWNED);
4849 for (device = TAILQ_FIRST(&target->ed_entries);
4851 device = TAILQ_NEXT(device, links)) {
4852 if (device->lun_id == lun_id) {
4861 xpt_start_tags(struct cam_path *path)
4863 struct ccb_relsim crs;
4864 struct cam_ed *device;
4865 struct cam_sim *sim;
4868 device = path->device;
4869 sim = path->bus->sim;
4870 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4871 xpt_freeze_devq(path, /*count*/1);
4872 device->inq_flags |= SID_CmdQue;
4873 if (device->tag_saved_openings != 0)
4874 newopenings = device->tag_saved_openings;
4876 newopenings = min(device->maxtags,
4877 sim->max_tagged_dev_openings);
4878 xpt_dev_ccbq_resize(path, newopenings);
4879 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4880 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4881 crs.ccb_h.func_code = XPT_REL_SIMQ;
4882 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4884 = crs.release_timeout
4887 xpt_action((union ccb *)&crs);
4891 xpt_stop_tags(struct cam_path *path)
4893 struct ccb_relsim crs;
4894 struct cam_ed *device;
4895 struct cam_sim *sim;
4897 device = path->device;
4898 sim = path->bus->sim;
4899 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4900 device->tag_delay_count = 0;
4901 xpt_freeze_devq(path, /*count*/1);
4902 device->inq_flags &= ~SID_CmdQue;
4903 xpt_dev_ccbq_resize(path, sim->max_dev_openings);
4904 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4905 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4906 crs.ccb_h.func_code = XPT_REL_SIMQ;
4907 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4909 = crs.release_timeout
4912 xpt_action((union ccb *)&crs);
4916 xpt_boot_delay(void *arg)
4923 xpt_config(void *arg)
4926 * Now that interrupts are enabled, go find our devices
4928 if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
4929 printf("xpt_config: failed to create taskqueue thread.\n");
4931 /* Setup debugging path */
4932 if (cam_dflags != CAM_DEBUG_NONE) {
4933 if (xpt_create_path(&cam_dpath, NULL,
4934 CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
4935 CAM_DEBUG_LUN) != CAM_REQ_CMP) {
4936 printf("xpt_config: xpt_create_path() failed for debug"
4937 " target %d:%d:%d, debugging disabled\n",
4938 CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
4939 cam_dflags = CAM_DEBUG_NONE;
4944 periphdriver_init(1);
4946 callout_init(&xsoftc.boot_callout, 1);
4947 callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0,
4948 xpt_boot_delay, NULL, 0);
4949 /* Fire up rescan thread. */
4950 if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
4951 "cam", "scanner")) {
4952 printf("xpt_config: failed to create rescan thread.\n");
4960 xsoftc.buses_to_config++;
4965 xpt_release_boot(void)
4968 xsoftc.buses_to_config--;
4969 if (xsoftc.buses_to_config == 0 && xsoftc.buses_config_done == 0) {
4970 struct xpt_task *task;
4972 xsoftc.buses_config_done = 1;
4974 /* Call manually because we don't have any busses */
4975 task = malloc(sizeof(struct xpt_task), M_CAMXPT, M_NOWAIT);
4977 TASK_INIT(&task->task, 0, xpt_finishconfig_task, task);
4978 taskqueue_enqueue(taskqueue_thread, &task->task);
4985 * If the given device only has one peripheral attached to it, and if that
4986 * peripheral is the passthrough driver, announce it. This insures that the
4987 * user sees some sort of announcement for every peripheral in their system.
4990 xptpassannouncefunc(struct cam_ed *device, void *arg)
4992 struct cam_periph *periph;
4995 for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
4996 periph = SLIST_NEXT(periph, periph_links), i++);
4998 periph = SLIST_FIRST(&device->periphs);
5000 && (strncmp(periph->periph_name, "pass", 4) == 0))
5001 xpt_announce_periph(periph, NULL);
5007 xpt_finishconfig_task(void *context, int pending)
5010 periphdriver_init(2);
5012 * Check for devices with no "standard" peripheral driver
5013 * attached. For any devices like that, announce the
5014 * passthrough driver so the user will see something.
5017 xpt_for_all_devices(xptpassannouncefunc, NULL);
5019 /* Release our hook so that the boot can continue. */
5020 config_intrhook_disestablish(xsoftc.xpt_config_hook);
5021 free(xsoftc.xpt_config_hook, M_CAMXPT);
5022 xsoftc.xpt_config_hook = NULL;
5024 free(context, M_CAMXPT);
5028 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5029 struct cam_path *path)
5031 struct ccb_setasync csa;
5036 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5037 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5038 if (status != CAM_REQ_CMP)
5040 xpt_path_lock(path);
5044 xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5045 csa.ccb_h.func_code = XPT_SASYNC_CB;
5046 csa.event_enable = event;
5047 csa.callback = cbfunc;
5048 csa.callback_arg = cbarg;
5049 xpt_action((union ccb *)&csa);
5050 status = csa.ccb_h.status;
5053 xpt_path_unlock(path);
5054 xpt_free_path(path);
5057 if ((status == CAM_REQ_CMP) &&
5058 (csa.event_enable & AC_FOUND_DEVICE)) {
5060 * Get this peripheral up to date with all
5061 * the currently existing devices.
5063 xpt_for_all_devices(xptsetasyncfunc, &csa);
5065 if ((status == CAM_REQ_CMP) &&
5066 (csa.event_enable & AC_PATH_REGISTERED)) {
5068 * Get this peripheral up to date with all
5069 * the currently existing busses.
5071 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5078 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5080 CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5082 switch (work_ccb->ccb_h.func_code) {
5083 /* Common cases first */
5084 case XPT_PATH_INQ: /* Path routing inquiry */
5086 struct ccb_pathinq *cpi;
5088 cpi = &work_ccb->cpi;
5089 cpi->version_num = 1; /* XXX??? */
5090 cpi->hba_inquiry = 0;
5091 cpi->target_sprt = 0;
5093 cpi->hba_eng_cnt = 0;
5094 cpi->max_target = 0;
5096 cpi->initiator_id = 0;
5097 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5098 strncpy(cpi->hba_vid, "", HBA_IDLEN);
5099 strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5100 cpi->unit_number = sim->unit_number;
5101 cpi->bus_id = sim->bus_id;
5102 cpi->base_transfer_speed = 0;
5103 cpi->protocol = PROTO_UNSPECIFIED;
5104 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5105 cpi->transport = XPORT_UNSPECIFIED;
5106 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5107 cpi->ccb_h.status = CAM_REQ_CMP;
5112 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5119 * The xpt as a "controller" has no interrupt sources, so polling
5123 xptpoll(struct cam_sim *sim)
5128 xpt_lock_buses(void)
5130 mtx_lock(&xsoftc.xpt_topo_lock);
5134 xpt_unlock_buses(void)
5136 mtx_unlock(&xsoftc.xpt_topo_lock);
5140 xpt_path_mtx(struct cam_path *path)
5143 return (&path->device->device_mtx);
5147 xpt_done_process(struct ccb_hdr *ccb_h)
5149 struct cam_sim *sim;
5150 struct cam_devq *devq;
5151 struct mtx *mtx = NULL;
5153 if (ccb_h->flags & CAM_HIGH_POWER) {
5154 struct highpowerlist *hphead;
5155 struct cam_ed *device;
5157 mtx_lock(&xsoftc.xpt_highpower_lock);
5158 hphead = &xsoftc.highpowerq;
5160 device = STAILQ_FIRST(hphead);
5163 * Increment the count since this command is done.
5165 xsoftc.num_highpower++;
5168 * Any high powered commands queued up?
5170 if (device != NULL) {
5172 STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5173 mtx_unlock(&xsoftc.xpt_highpower_lock);
5175 mtx_lock(&device->sim->devq->send_mtx);
5176 xpt_release_devq_device(device,
5177 /*count*/1, /*runqueue*/TRUE);
5178 mtx_unlock(&device->sim->devq->send_mtx);
5180 mtx_unlock(&xsoftc.xpt_highpower_lock);
5183 sim = ccb_h->path->bus->sim;
5185 if (ccb_h->status & CAM_RELEASE_SIMQ) {
5186 xpt_release_simq(sim, /*run_queue*/FALSE);
5187 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5190 if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5191 && (ccb_h->status & CAM_DEV_QFRZN)) {
5192 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5193 ccb_h->status &= ~CAM_DEV_QFRZN;
5197 if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5198 struct cam_ed *dev = ccb_h->path->device;
5200 mtx_lock(&devq->send_mtx);
5201 devq->send_active--;
5202 devq->send_openings++;
5203 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5205 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5206 && (dev->ccbq.dev_active == 0))) {
5207 dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5208 xpt_release_devq_device(dev, /*count*/1,
5209 /*run_queue*/FALSE);
5212 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5213 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5214 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5215 xpt_release_devq_device(dev, /*count*/1,
5216 /*run_queue*/FALSE);
5219 if (!device_is_queued(dev))
5220 (void)xpt_schedule_devq(devq, dev);
5222 mtx_unlock(&devq->send_mtx);
5224 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5225 mtx = xpt_path_mtx(ccb_h->path);
5228 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5229 && (--dev->tag_delay_count == 0))
5230 xpt_start_tags(ccb_h->path);
5234 if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5236 mtx = xpt_path_mtx(ccb_h->path);
5246 /* Call the peripheral driver's callback */
5247 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5248 (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5254 xpt_done_td(void *arg)
5256 struct cam_doneq *queue = arg;
5257 struct ccb_hdr *ccb_h;
5258 STAILQ_HEAD(, ccb_hdr) doneq;
5260 STAILQ_INIT(&doneq);
5261 mtx_lock(&queue->cam_doneq_mtx);
5263 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5264 queue->cam_doneq_sleep = 1;
5265 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5267 queue->cam_doneq_sleep = 0;
5269 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5270 mtx_unlock(&queue->cam_doneq_mtx);
5272 THREAD_NO_SLEEPING();
5273 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5274 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5275 xpt_done_process(ccb_h);
5277 THREAD_SLEEPING_OK();
5279 mtx_lock(&queue->cam_doneq_mtx);
5284 camisr_runqueue(void)
5286 struct ccb_hdr *ccb_h;
5287 struct cam_doneq *queue;
5290 /* Process global queues. */
5291 for (i = 0; i < cam_num_doneqs; i++) {
5292 queue = &cam_doneqs[i];
5293 mtx_lock(&queue->cam_doneq_mtx);
5294 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5295 STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5296 mtx_unlock(&queue->cam_doneq_mtx);
5297 xpt_done_process(ccb_h);
5298 mtx_lock(&queue->cam_doneq_mtx);
5300 mtx_unlock(&queue->cam_doneq_mtx);