2 * Implementation of the Common Access Method Transport (XPT) layer.
4 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
6 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
7 * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification, immediately at the beginning of the file.
16 * 2. The name of the author may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #include "opt_printf.h"
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD$");
37 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/types.h>
42 #include <sys/malloc.h>
43 #include <sys/kernel.h>
46 #include <sys/fcntl.h>
50 #include <sys/taskqueue.h>
53 #include <sys/mutex.h>
54 #include <sys/sysctl.h>
55 #include <sys/kthread.h>
58 #include <cam/cam_ccb.h>
59 #include <cam/cam_iosched.h>
60 #include <cam/cam_periph.h>
61 #include <cam/cam_queue.h>
62 #include <cam/cam_sim.h>
63 #include <cam/cam_xpt.h>
64 #include <cam/cam_xpt_sim.h>
65 #include <cam/cam_xpt_periph.h>
66 #include <cam/cam_xpt_internal.h>
67 #include <cam/cam_debug.h>
68 #include <cam/cam_compat.h>
70 #include <cam/scsi/scsi_all.h>
71 #include <cam/scsi/scsi_message.h>
72 #include <cam/scsi/scsi_pass.h>
74 #include <machine/md_var.h> /* geometry translation */
75 #include <machine/stdarg.h> /* for xpt_print below */
79 /* Wild guess based on not wanting to grow the stack too much */
80 #define XPT_PRINT_MAXLEN 512
81 #ifdef PRINTF_BUFR_SIZE
82 #define XPT_PRINT_LEN PRINTF_BUFR_SIZE
84 #define XPT_PRINT_LEN 128
86 _Static_assert(XPT_PRINT_LEN <= XPT_PRINT_MAXLEN, "XPT_PRINT_LEN is too large");
89 * This is the maximum number of high powered commands (e.g. start unit)
90 * that can be outstanding at a particular time.
92 #ifndef CAM_MAX_HIGHPOWER
93 #define CAM_MAX_HIGHPOWER 4
96 /* Datastructures internal to the xpt layer */
97 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
98 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
99 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
100 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
103 uint32_t xpt_generation;
105 /* number of high powered commands that can go through right now */
106 struct mtx xpt_highpower_lock;
107 STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
110 /* queue for handling async rescan requests. */
111 TAILQ_HEAD(, ccb_hdr) ccb_scanq;
113 int buses_config_done;
119 * N.B., "busses" is an archaic spelling of "buses". In new code
120 * "buses" is preferred.
122 TAILQ_HEAD(,cam_eb) xpt_busses;
123 u_int bus_generation;
126 struct callout boot_callout;
127 struct task boot_task;
128 struct root_hold_token xpt_rootmount;
130 struct mtx xpt_topo_lock;
131 struct taskqueue *xpt_taskq;
136 DM_RET_FLAG_MASK = 0x0f,
139 DM_RET_DESCEND = 0x20,
141 DM_RET_ACTION_MASK = 0xf0
149 } xpt_traverse_depth;
151 struct xpt_traverse_config {
152 xpt_traverse_depth depth;
157 typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
158 typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
159 typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
160 typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
161 typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
163 /* Transport layer configuration information */
164 static struct xpt_softc xsoftc;
166 MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF);
168 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
169 &xsoftc.boot_delay, 0, "Bus registration wait time");
170 SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD,
171 &xsoftc.xpt_generation, 0, "CAM peripheral generation count");
172 SYSCTL_INT(_kern_cam, OID_AUTO, announce_nosbuf, CTLFLAG_RWTUN,
173 &xsoftc.announce_nosbuf, 0, "Don't use sbuf for announcements");
176 struct mtx_padalign cam_doneq_mtx;
177 STAILQ_HEAD(, ccb_hdr) cam_doneq;
181 static struct cam_doneq cam_doneqs[MAXCPU];
182 static int cam_num_doneqs;
183 static struct proc *cam_proc;
185 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
186 &cam_num_doneqs, 0, "Number of completion queues/threads");
188 struct cam_periph *xpt_periph;
190 static periph_init_t xpt_periph_init;
192 static struct periph_driver xpt_driver =
194 xpt_periph_init, "xpt",
195 TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
199 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
201 static d_open_t xptopen;
202 static d_close_t xptclose;
203 static d_ioctl_t xptioctl;
204 static d_ioctl_t xptdoioctl;
206 static struct cdevsw xpt_cdevsw = {
207 .d_version = D_VERSION,
215 /* Storage for debugging datastructures */
216 struct cam_path *cam_dpath;
217 u_int32_t __read_mostly cam_dflags = CAM_DEBUG_FLAGS;
218 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN,
219 &cam_dflags, 0, "Enabled debug flags");
220 u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
221 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN,
222 &cam_debug_delay, 0, "Delay in us after each debug message");
224 /* Our boot-time initialization hook */
225 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
227 static moduledata_t cam_moduledata = {
229 cam_module_event_handler,
233 static int xpt_init(void *);
235 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
236 MODULE_VERSION(cam, 1);
239 static void xpt_async_bcast(struct async_list *async_head,
240 u_int32_t async_code,
241 struct cam_path *path,
243 static path_id_t xptnextfreepathid(void);
244 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
245 static union ccb *xpt_get_ccb(struct cam_periph *periph);
246 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
247 static void xpt_run_allocq(struct cam_periph *periph, int sleep);
248 static void xpt_run_allocq_task(void *context, int pending);
249 static void xpt_run_devq(struct cam_devq *devq);
250 static callout_func_t xpt_release_devq_timeout;
251 static void xpt_acquire_bus(struct cam_eb *bus);
252 static void xpt_release_bus(struct cam_eb *bus);
253 static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
254 static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
256 static struct cam_et*
257 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
258 static void xpt_acquire_target(struct cam_et *target);
259 static void xpt_release_target(struct cam_et *target);
260 static struct cam_eb*
261 xpt_find_bus(path_id_t path_id);
262 static struct cam_et*
263 xpt_find_target(struct cam_eb *bus, target_id_t target_id);
264 static struct cam_ed*
265 xpt_find_device(struct cam_et *target, lun_id_t lun_id);
266 static void xpt_config(void *arg);
267 static void xpt_hold_boot_locked(void);
268 static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
269 u_int32_t new_priority);
270 static xpt_devicefunc_t xptpassannouncefunc;
271 static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
272 static void xptpoll(struct cam_sim *sim);
273 static void camisr_runqueue(void);
274 static void xpt_done_process(struct ccb_hdr *ccb_h);
275 static void xpt_done_td(void *);
276 static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
277 u_int num_patterns, struct cam_eb *bus);
278 static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
280 struct cam_ed *device);
281 static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
283 struct cam_periph *periph);
284 static xpt_busfunc_t xptedtbusfunc;
285 static xpt_targetfunc_t xptedttargetfunc;
286 static xpt_devicefunc_t xptedtdevicefunc;
287 static xpt_periphfunc_t xptedtperiphfunc;
288 static xpt_pdrvfunc_t xptplistpdrvfunc;
289 static xpt_periphfunc_t xptplistperiphfunc;
290 static int xptedtmatch(struct ccb_dev_match *cdm);
291 static int xptperiphlistmatch(struct ccb_dev_match *cdm);
292 static int xptbustraverse(struct cam_eb *start_bus,
293 xpt_busfunc_t *tr_func, void *arg);
294 static int xpttargettraverse(struct cam_eb *bus,
295 struct cam_et *start_target,
296 xpt_targetfunc_t *tr_func, void *arg);
297 static int xptdevicetraverse(struct cam_et *target,
298 struct cam_ed *start_device,
299 xpt_devicefunc_t *tr_func, void *arg);
300 static int xptperiphtraverse(struct cam_ed *device,
301 struct cam_periph *start_periph,
302 xpt_periphfunc_t *tr_func, void *arg);
303 static int xptpdrvtraverse(struct periph_driver **start_pdrv,
304 xpt_pdrvfunc_t *tr_func, void *arg);
305 static int xptpdperiphtraverse(struct periph_driver **pdrv,
306 struct cam_periph *start_periph,
307 xpt_periphfunc_t *tr_func,
309 static xpt_busfunc_t xptdefbusfunc;
310 static xpt_targetfunc_t xptdeftargetfunc;
311 static xpt_devicefunc_t xptdefdevicefunc;
312 static xpt_periphfunc_t xptdefperiphfunc;
313 static void xpt_finishconfig_task(void *context, int pending);
314 static void xpt_dev_async_default(u_int32_t async_code,
316 struct cam_et *target,
317 struct cam_ed *device,
319 static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
320 struct cam_et *target,
322 static xpt_devicefunc_t xptsetasyncfunc;
323 static xpt_busfunc_t xptsetasyncbusfunc;
324 static cam_status xptregister(struct cam_periph *periph,
326 static __inline int device_is_queued(struct cam_ed *device);
329 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
333 mtx_assert(&devq->send_mtx, MA_OWNED);
334 if ((dev->ccbq.queue.entries > 0) &&
335 (dev->ccbq.dev_openings > 0) &&
336 (dev->ccbq.queue.qfrozen_cnt == 0)) {
338 * The priority of a device waiting for controller
339 * resources is that of the highest priority CCB
343 xpt_schedule_dev(&devq->send_queue,
345 CAMQ_GET_PRIO(&dev->ccbq.queue));
353 device_is_queued(struct cam_ed *device)
355 return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
361 make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
365 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
369 * Only allow read-write access.
371 if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
375 * We don't allow nonblocking access.
377 if ((flags & O_NONBLOCK) != 0) {
378 printf("%s: can't do nonblocking access\n", devtoname(dev));
386 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
393 * Don't automatically grab the xpt softc lock here even though this is going
394 * through the xpt device. The xpt device is really just a back door for
395 * accessing other devices and SIMs, so the right thing to do is to grab
396 * the appropriate SIM lock once the bus/SIM is located.
399 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
403 if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
404 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
410 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
418 * For the transport layer CAMIOCOMMAND ioctl, we really only want
419 * to accept CCB types that don't quite make sense to send through a
420 * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
428 inccb = (union ccb *)addr;
429 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
430 if (inccb->ccb_h.func_code == XPT_SCSI_IO)
431 inccb->csio.bio = NULL;
434 if (inccb->ccb_h.flags & CAM_UNLOCKED)
437 bus = xpt_find_bus(inccb->ccb_h.path_id);
441 switch (inccb->ccb_h.func_code) {
444 if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
445 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
446 xpt_release_bus(bus);
451 if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
452 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
453 xpt_release_bus(bus);
461 switch(inccb->ccb_h.func_code) {
469 ccb = xpt_alloc_ccb();
472 * Create a path using the bus, target, and lun the
475 if (xpt_create_path(&ccb->ccb_h.path, NULL,
476 inccb->ccb_h.path_id,
477 inccb->ccb_h.target_id,
478 inccb->ccb_h.target_lun) !=
484 /* Ensure all of our fields are correct */
485 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
486 inccb->ccb_h.pinfo.priority);
487 xpt_merge_ccb(ccb, inccb);
488 xpt_path_lock(ccb->ccb_h.path);
489 cam_periph_runccb(ccb, NULL, 0, 0, NULL);
490 xpt_path_unlock(ccb->ccb_h.path);
491 bcopy(ccb, inccb, sizeof(union ccb));
492 xpt_free_path(ccb->ccb_h.path);
500 * This is an immediate CCB, so it's okay to
501 * allocate it on the stack.
505 * Create a path using the bus, target, and lun the
508 if (xpt_create_path(&ccb.ccb_h.path, NULL,
509 inccb->ccb_h.path_id,
510 inccb->ccb_h.target_id,
511 inccb->ccb_h.target_lun) !=
516 /* Ensure all of our fields are correct */
517 xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
518 inccb->ccb_h.pinfo.priority);
519 xpt_merge_ccb(&ccb, inccb);
521 bcopy(&ccb, inccb, sizeof(union ccb));
522 xpt_free_path(ccb.ccb_h.path);
526 case XPT_DEV_MATCH: {
527 struct cam_periph_map_info mapinfo;
528 struct cam_path *old_path;
531 * We can't deal with physical addresses for this
532 * type of transaction.
534 if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
541 * Save this in case the caller had it set to
542 * something in particular.
544 old_path = inccb->ccb_h.path;
547 * We really don't need a path for the matching
548 * code. The path is needed because of the
549 * debugging statements in xpt_action(). They
550 * assume that the CCB has a valid path.
552 inccb->ccb_h.path = xpt_periph->path;
554 bzero(&mapinfo, sizeof(mapinfo));
557 * Map the pattern and match buffers into kernel
558 * virtual address space.
560 error = cam_periph_mapmem(inccb, &mapinfo, MAXPHYS);
563 inccb->ccb_h.path = old_path;
568 * This is an immediate CCB, we can send it on directly.
573 * Map the buffers back into user space.
575 cam_periph_unmapmem(inccb, &mapinfo);
577 inccb->ccb_h.path = old_path;
586 xpt_release_bus(bus);
590 * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
591 * with the periphal driver name and unit name filled in. The other
592 * fields don't really matter as input. The passthrough driver name
593 * ("pass"), and unit number are passed back in the ccb. The current
594 * device generation number, and the index into the device peripheral
595 * driver list, and the status are also passed back. Note that
596 * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
597 * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
598 * (or rather should be) impossible for the device peripheral driver
599 * list to change since we look at the whole thing in one pass, and
600 * we do it with lock protection.
603 case CAMGETPASSTHRU: {
605 struct cam_periph *periph;
606 struct periph_driver **p_drv;
609 int base_periph_found;
611 ccb = (union ccb *)addr;
612 unit = ccb->cgdl.unit_number;
613 name = ccb->cgdl.periph_name;
614 base_periph_found = 0;
615 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
616 if (ccb->ccb_h.func_code == XPT_SCSI_IO)
617 ccb->csio.bio = NULL;
621 * Sanity check -- make sure we don't get a null peripheral
624 if (*ccb->cgdl.periph_name == '\0') {
629 /* Keep the list from changing while we traverse it */
632 /* first find our driver in the list of drivers */
633 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
634 if (strcmp((*p_drv)->driver_name, name) == 0)
637 if (*p_drv == NULL) {
639 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
640 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
641 *ccb->cgdl.periph_name = '\0';
642 ccb->cgdl.unit_number = 0;
648 * Run through every peripheral instance of this driver
649 * and check to see whether it matches the unit passed
650 * in by the user. If it does, get out of the loops and
651 * find the passthrough driver associated with that
654 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
655 periph = TAILQ_NEXT(periph, unit_links)) {
657 if (periph->unit_number == unit)
661 * If we found the peripheral driver that the user passed
662 * in, go through all of the peripheral drivers for that
663 * particular device and look for a passthrough driver.
665 if (periph != NULL) {
666 struct cam_ed *device;
669 base_periph_found = 1;
670 device = periph->path->device;
671 for (i = 0, periph = SLIST_FIRST(&device->periphs);
673 periph = SLIST_NEXT(periph, periph_links), i++) {
675 * Check to see whether we have a
676 * passthrough device or not.
678 if (strcmp(periph->periph_name, "pass") == 0) {
680 * Fill in the getdevlist fields.
682 strlcpy(ccb->cgdl.periph_name,
684 sizeof(ccb->cgdl.periph_name));
685 ccb->cgdl.unit_number =
687 if (SLIST_NEXT(periph, periph_links))
689 CAM_GDEVLIST_MORE_DEVS;
692 CAM_GDEVLIST_LAST_DEVICE;
693 ccb->cgdl.generation =
697 * Fill in some CCB header fields
698 * that the user may want.
701 periph->path->bus->path_id;
702 ccb->ccb_h.target_id =
703 periph->path->target->target_id;
704 ccb->ccb_h.target_lun =
705 periph->path->device->lun_id;
706 ccb->ccb_h.status = CAM_REQ_CMP;
713 * If the periph is null here, one of two things has
714 * happened. The first possibility is that we couldn't
715 * find the unit number of the particular peripheral driver
716 * that the user is asking about. e.g. the user asks for
717 * the passthrough driver for "da11". We find the list of
718 * "da" peripherals all right, but there is no unit 11.
719 * The other possibility is that we went through the list
720 * of peripheral drivers attached to the device structure,
721 * but didn't find one with the name "pass". Either way,
722 * we return ENOENT, since we couldn't find something.
724 if (periph == NULL) {
725 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
726 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
727 *ccb->cgdl.periph_name = '\0';
728 ccb->cgdl.unit_number = 0;
731 * It is unfortunate that this is even necessary,
732 * but there are many, many clueless users out there.
733 * If this is true, the user is looking for the
734 * passthrough driver, but doesn't have one in his
737 if (base_periph_found == 1) {
738 printf("xptioctl: pass driver is not in the "
740 printf("xptioctl: put \"device pass\" in "
741 "your kernel config file\n");
756 cam_module_event_handler(module_t mod, int what, void *arg)
762 if ((error = xpt_init(NULL)) != 0)
774 static struct xpt_proto *
775 xpt_proto_find(cam_proto proto)
777 struct xpt_proto **pp;
779 SET_FOREACH(pp, cam_xpt_proto_set) {
780 if ((*pp)->proto == proto)
788 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
791 if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
792 xpt_free_path(done_ccb->ccb_h.path);
793 xpt_free_ccb(done_ccb);
795 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
796 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
801 /* thread to handle bus rescans */
803 xpt_scanner_thread(void *dummy)
806 struct cam_path path;
810 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
811 msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
813 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
814 TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
818 * Since lock can be dropped inside and path freed
819 * by completion callback even before return here,
820 * take our own path copy for reference.
822 xpt_copy_path(&path, ccb->ccb_h.path);
823 xpt_path_lock(&path);
825 xpt_path_unlock(&path);
826 xpt_release_path(&path);
834 xpt_rescan(union ccb *ccb)
838 /* Prepare request */
839 if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
840 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
841 ccb->ccb_h.func_code = XPT_SCAN_BUS;
842 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
843 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
844 ccb->ccb_h.func_code = XPT_SCAN_TGT;
845 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
846 ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
847 ccb->ccb_h.func_code = XPT_SCAN_LUN;
849 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
850 xpt_free_path(ccb->ccb_h.path);
854 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
855 ("xpt_rescan: func %#x %s\n", ccb->ccb_h.func_code,
856 xpt_action_name(ccb->ccb_h.func_code)));
858 ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
859 ccb->ccb_h.cbfcnp = xpt_rescan_done;
860 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
861 /* Don't make duplicate entries for the same paths. */
863 if (ccb->ccb_h.ppriv_ptr1 == NULL) {
864 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
865 if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
866 wakeup(&xsoftc.ccb_scanq);
868 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
869 xpt_free_path(ccb->ccb_h.path);
875 TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
876 xpt_hold_boot_locked();
877 wakeup(&xsoftc.ccb_scanq);
881 /* Functions accessed by the peripheral drivers */
883 xpt_init(void *dummy)
885 struct cam_sim *xpt_sim;
886 struct cam_path *path;
887 struct cam_devq *devq;
891 TAILQ_INIT(&xsoftc.xpt_busses);
892 TAILQ_INIT(&xsoftc.ccb_scanq);
893 STAILQ_INIT(&xsoftc.highpowerq);
894 xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
896 mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
897 xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
898 taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
900 #ifdef CAM_BOOT_DELAY
902 * Override this value at compile time to assist our users
903 * who don't use loader to boot a kernel.
905 xsoftc.boot_delay = CAM_BOOT_DELAY;
909 * The xpt layer is, itself, the equivalent of a SIM.
910 * Allow 16 ccbs in the ccb pool for it. This should
911 * give decent parallelism when we probe buses and
912 * perform other XPT functions.
914 devq = cam_simq_alloc(16);
915 xpt_sim = cam_sim_alloc(xptaction,
921 /*max_dev_transactions*/0,
922 /*max_tagged_dev_transactions*/0,
927 if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
928 printf("xpt_init: xpt_bus_register failed with status %#x,"
929 " failing attach\n", status);
934 * Looking at the XPT from the SIM layer, the XPT is
935 * the equivalent of a peripheral driver. Allocate
936 * a peripheral driver entry for us.
938 if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
940 CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
941 printf("xpt_init: xpt_create_path failed with status %#x,"
942 " failing attach\n", status);
946 cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
947 path, NULL, 0, xpt_sim);
948 xpt_path_unlock(path);
951 if (cam_num_doneqs < 1)
952 cam_num_doneqs = 1 + mp_ncpus / 6;
953 else if (cam_num_doneqs > MAXCPU)
954 cam_num_doneqs = MAXCPU;
955 for (i = 0; i < cam_num_doneqs; i++) {
956 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
958 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
959 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
960 &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
966 if (cam_num_doneqs < 1) {
967 printf("xpt_init: Cannot init completion queues "
968 "- failing attach\n");
973 * Register a callback for when interrupts are enabled.
975 config_intrhook_oneshot(xpt_config, NULL);
981 xptregister(struct cam_periph *periph, void *arg)
983 struct cam_sim *xpt_sim;
985 if (periph == NULL) {
986 printf("xptregister: periph was NULL!!\n");
987 return(CAM_REQ_CMP_ERR);
990 xpt_sim = (struct cam_sim *)arg;
991 xpt_sim->softc = periph;
993 periph->softc = NULL;
999 xpt_add_periph(struct cam_periph *periph)
1001 struct cam_ed *device;
1004 TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
1005 device = periph->path->device;
1006 status = CAM_REQ_CMP;
1007 if (device != NULL) {
1008 mtx_lock(&device->target->bus->eb_mtx);
1009 device->generation++;
1010 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
1011 mtx_unlock(&device->target->bus->eb_mtx);
1012 atomic_add_32(&xsoftc.xpt_generation, 1);
1019 xpt_remove_periph(struct cam_periph *periph)
1021 struct cam_ed *device;
1023 device = periph->path->device;
1024 if (device != NULL) {
1025 mtx_lock(&device->target->bus->eb_mtx);
1026 device->generation++;
1027 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
1028 mtx_unlock(&device->target->bus->eb_mtx);
1029 atomic_add_32(&xsoftc.xpt_generation, 1);
1035 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1037 struct cam_path *path = periph->path;
1038 struct xpt_proto *proto;
1040 cam_periph_assert(periph, MA_OWNED);
1041 periph->flags |= CAM_PERIPH_ANNOUNCED;
1043 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1044 periph->periph_name, periph->unit_number,
1045 path->bus->sim->sim_name,
1046 path->bus->sim->unit_number,
1047 path->bus->sim->bus_id,
1049 path->target->target_id,
1050 (uintmax_t)path->device->lun_id);
1051 printf("%s%d: ", periph->periph_name, periph->unit_number);
1052 proto = xpt_proto_find(path->device->protocol);
1054 proto->ops->announce(path->device);
1056 printf("%s%d: Unknown protocol device %d\n",
1057 periph->periph_name, periph->unit_number,
1058 path->device->protocol);
1059 if (path->device->serial_num_len > 0) {
1060 /* Don't wrap the screen - print only the first 60 chars */
1061 printf("%s%d: Serial Number %.60s\n", periph->periph_name,
1062 periph->unit_number, path->device->serial_num);
1064 /* Announce transport details. */
1065 path->bus->xport->ops->announce(periph);
1066 /* Announce command queueing. */
1067 if (path->device->inq_flags & SID_CmdQue
1068 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1069 printf("%s%d: Command Queueing enabled\n",
1070 periph->periph_name, periph->unit_number);
1072 /* Announce caller's details if they've passed in. */
1073 if (announce_string != NULL)
1074 printf("%s%d: %s\n", periph->periph_name,
1075 periph->unit_number, announce_string);
1079 xpt_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb,
1080 char *announce_string)
1082 struct cam_path *path = periph->path;
1083 struct xpt_proto *proto;
1085 cam_periph_assert(periph, MA_OWNED);
1086 periph->flags |= CAM_PERIPH_ANNOUNCED;
1088 /* Fall back to the non-sbuf method if necessary */
1089 if (xsoftc.announce_nosbuf != 0) {
1090 xpt_announce_periph(periph, announce_string);
1093 proto = xpt_proto_find(path->device->protocol);
1094 if (((proto != NULL) && (proto->ops->announce_sbuf == NULL)) ||
1095 (path->bus->xport->ops->announce_sbuf == NULL)) {
1096 xpt_announce_periph(periph, announce_string);
1100 sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1101 periph->periph_name, periph->unit_number,
1102 path->bus->sim->sim_name,
1103 path->bus->sim->unit_number,
1104 path->bus->sim->bus_id,
1106 path->target->target_id,
1107 (uintmax_t)path->device->lun_id);
1108 sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
1111 proto->ops->announce_sbuf(path->device, sb);
1113 sbuf_printf(sb, "%s%d: Unknown protocol device %d\n",
1114 periph->periph_name, periph->unit_number,
1115 path->device->protocol);
1116 if (path->device->serial_num_len > 0) {
1117 /* Don't wrap the screen - print only the first 60 chars */
1118 sbuf_printf(sb, "%s%d: Serial Number %.60s\n",
1119 periph->periph_name, periph->unit_number,
1120 path->device->serial_num);
1122 /* Announce transport details. */
1123 path->bus->xport->ops->announce_sbuf(periph, sb);
1124 /* Announce command queueing. */
1125 if (path->device->inq_flags & SID_CmdQue
1126 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1127 sbuf_printf(sb, "%s%d: Command Queueing enabled\n",
1128 periph->periph_name, periph->unit_number);
1130 /* Announce caller's details if they've passed in. */
1131 if (announce_string != NULL)
1132 sbuf_printf(sb, "%s%d: %s\n", periph->periph_name,
1133 periph->unit_number, announce_string);
1137 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1140 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1141 periph->unit_number, quirks, bit_string);
1146 xpt_announce_quirks_sbuf(struct cam_periph *periph, struct sbuf *sb,
1147 int quirks, char *bit_string)
1149 if (xsoftc.announce_nosbuf != 0) {
1150 xpt_announce_quirks(periph, quirks, bit_string);
1155 sbuf_printf(sb, "%s%d: quirks=0x%b\n", periph->periph_name,
1156 periph->unit_number, quirks, bit_string);
1161 xpt_denounce_periph(struct cam_periph *periph)
1163 struct cam_path *path = periph->path;
1164 struct xpt_proto *proto;
1166 cam_periph_assert(periph, MA_OWNED);
1167 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1168 periph->periph_name, periph->unit_number,
1169 path->bus->sim->sim_name,
1170 path->bus->sim->unit_number,
1171 path->bus->sim->bus_id,
1173 path->target->target_id,
1174 (uintmax_t)path->device->lun_id);
1175 printf("%s%d: ", periph->periph_name, periph->unit_number);
1176 proto = xpt_proto_find(path->device->protocol);
1178 proto->ops->denounce(path->device);
1180 printf("%s%d: Unknown protocol device %d\n",
1181 periph->periph_name, periph->unit_number,
1182 path->device->protocol);
1183 if (path->device->serial_num_len > 0)
1184 printf(" s/n %.60s", path->device->serial_num);
1185 printf(" detached\n");
1189 xpt_denounce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb)
1191 struct cam_path *path = periph->path;
1192 struct xpt_proto *proto;
1194 cam_periph_assert(periph, MA_OWNED);
1196 /* Fall back to the non-sbuf method if necessary */
1197 if (xsoftc.announce_nosbuf != 0) {
1198 xpt_denounce_periph(periph);
1201 proto = xpt_proto_find(path->device->protocol);
1202 if ((proto != NULL) && (proto->ops->denounce_sbuf == NULL)) {
1203 xpt_denounce_periph(periph);
1207 sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1208 periph->periph_name, periph->unit_number,
1209 path->bus->sim->sim_name,
1210 path->bus->sim->unit_number,
1211 path->bus->sim->bus_id,
1213 path->target->target_id,
1214 (uintmax_t)path->device->lun_id);
1215 sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
1218 proto->ops->denounce_sbuf(path->device, sb);
1220 sbuf_printf(sb, "%s%d: Unknown protocol device %d\n",
1221 periph->periph_name, periph->unit_number,
1222 path->device->protocol);
1223 if (path->device->serial_num_len > 0)
1224 sbuf_printf(sb, " s/n %.60s", path->device->serial_num);
1225 sbuf_printf(sb, " detached\n");
1229 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1232 struct ccb_dev_advinfo cdai;
1233 struct scsi_vpd_device_id *did;
1234 struct scsi_vpd_id_descriptor *idd;
1236 xpt_path_assert(path, MA_OWNED);
1238 memset(&cdai, 0, sizeof(cdai));
1239 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1240 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1241 cdai.flags = CDAI_FLAG_NONE;
1245 if (!strcmp(attr, "GEOM::ident"))
1246 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1247 else if (!strcmp(attr, "GEOM::physpath"))
1248 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1249 else if (strcmp(attr, "GEOM::lunid") == 0 ||
1250 strcmp(attr, "GEOM::lunname") == 0) {
1251 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1252 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1253 cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT);
1254 if (cdai.buf == NULL) {
1261 xpt_action((union ccb *)&cdai); /* can only be synchronous */
1262 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1263 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1264 if (cdai.provsiz == 0)
1266 switch(cdai.buftype) {
1267 case CDAI_TYPE_SCSI_DEVID:
1268 did = (struct scsi_vpd_device_id *)cdai.buf;
1269 if (strcmp(attr, "GEOM::lunid") == 0) {
1270 idd = scsi_get_devid(did, cdai.provsiz,
1271 scsi_devid_is_lun_naa);
1273 idd = scsi_get_devid(did, cdai.provsiz,
1274 scsi_devid_is_lun_eui64);
1276 idd = scsi_get_devid(did, cdai.provsiz,
1277 scsi_devid_is_lun_uuid);
1279 idd = scsi_get_devid(did, cdai.provsiz,
1280 scsi_devid_is_lun_md5);
1285 idd = scsi_get_devid(did, cdai.provsiz,
1286 scsi_devid_is_lun_t10);
1288 idd = scsi_get_devid(did, cdai.provsiz,
1289 scsi_devid_is_lun_name);
1294 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) ==
1295 SVPD_ID_CODESET_ASCII) {
1296 if (idd->length < len) {
1297 for (l = 0; l < idd->length; l++)
1298 buf[l] = idd->identifier[l] ?
1299 idd->identifier[l] : ' ';
1305 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) ==
1306 SVPD_ID_CODESET_UTF8) {
1307 l = strnlen(idd->identifier, idd->length);
1309 bcopy(idd->identifier, buf, l);
1315 if ((idd->id_type & SVPD_ID_TYPE_MASK) ==
1316 SVPD_ID_TYPE_UUID && idd->identifier[0] == 0x10) {
1317 if ((idd->length - 2) * 2 + 4 >= len) {
1321 for (l = 2, o = 0; l < idd->length; l++) {
1322 if (l == 6 || l == 8 || l == 10 || l == 12)
1323 o += sprintf(buf + o, "-");
1324 o += sprintf(buf + o, "%02x",
1325 idd->identifier[l]);
1329 if (idd->length * 2 < len) {
1330 for (l = 0; l < idd->length; l++)
1331 sprintf(buf + l * 2, "%02x",
1332 idd->identifier[l]);
1337 if (cdai.provsiz < len) {
1338 cdai.buf[cdai.provsiz] = 0;
1346 if ((char *)cdai.buf != buf)
1347 free(cdai.buf, M_CAMXPT);
1351 static dev_match_ret
1352 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1355 dev_match_ret retval;
1358 retval = DM_RET_NONE;
1361 * If we aren't given something to match against, that's an error.
1364 return(DM_RET_ERROR);
1367 * If there are no match entries, then this bus matches no
1370 if ((patterns == NULL) || (num_patterns == 0))
1371 return(DM_RET_DESCEND | DM_RET_COPY);
1373 for (i = 0; i < num_patterns; i++) {
1374 struct bus_match_pattern *cur_pattern;
1377 * If the pattern in question isn't for a bus node, we
1378 * aren't interested. However, we do indicate to the
1379 * calling routine that we should continue descending the
1380 * tree, since the user wants to match against lower-level
1383 if (patterns[i].type != DEV_MATCH_BUS) {
1384 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1385 retval |= DM_RET_DESCEND;
1389 cur_pattern = &patterns[i].pattern.bus_pattern;
1392 * If they want to match any bus node, we give them any
1395 if (cur_pattern->flags == BUS_MATCH_ANY) {
1396 /* set the copy flag */
1397 retval |= DM_RET_COPY;
1400 * If we've already decided on an action, go ahead
1403 if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
1408 * Not sure why someone would do this...
1410 if (cur_pattern->flags == BUS_MATCH_NONE)
1413 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1414 && (cur_pattern->path_id != bus->path_id))
1417 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1418 && (cur_pattern->bus_id != bus->sim->bus_id))
1421 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1422 && (cur_pattern->unit_number != bus->sim->unit_number))
1425 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1426 && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1431 * If we get to this point, the user definitely wants
1432 * information on this bus. So tell the caller to copy the
1435 retval |= DM_RET_COPY;
1438 * If the return action has been set to descend, then we
1439 * know that we've already seen a non-bus matching
1440 * expression, therefore we need to further descend the tree.
1441 * This won't change by continuing around the loop, so we
1442 * go ahead and return. If we haven't seen a non-bus
1443 * matching expression, we keep going around the loop until
1444 * we exhaust the matching expressions. We'll set the stop
1445 * flag once we fall out of the loop.
1447 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1452 * If the return action hasn't been set to descend yet, that means
1453 * we haven't seen anything other than bus matching patterns. So
1454 * tell the caller to stop descending the tree -- the user doesn't
1455 * want to match against lower level tree elements.
1457 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1458 retval |= DM_RET_STOP;
1463 static dev_match_ret
1464 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1465 struct cam_ed *device)
1467 dev_match_ret retval;
1470 retval = DM_RET_NONE;
1473 * If we aren't given something to match against, that's an error.
1476 return(DM_RET_ERROR);
1479 * If there are no match entries, then this device matches no
1482 if ((patterns == NULL) || (num_patterns == 0))
1483 return(DM_RET_DESCEND | DM_RET_COPY);
1485 for (i = 0; i < num_patterns; i++) {
1486 struct device_match_pattern *cur_pattern;
1487 struct scsi_vpd_device_id *device_id_page;
1490 * If the pattern in question isn't for a device node, we
1491 * aren't interested.
1493 if (patterns[i].type != DEV_MATCH_DEVICE) {
1494 if ((patterns[i].type == DEV_MATCH_PERIPH)
1495 && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1496 retval |= DM_RET_DESCEND;
1500 cur_pattern = &patterns[i].pattern.device_pattern;
1502 /* Error out if mutually exclusive options are specified. */
1503 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1504 == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1505 return(DM_RET_ERROR);
1508 * If they want to match any device node, we give them any
1511 if (cur_pattern->flags == DEV_MATCH_ANY)
1515 * Not sure why someone would do this...
1517 if (cur_pattern->flags == DEV_MATCH_NONE)
1520 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1521 && (cur_pattern->path_id != device->target->bus->path_id))
1524 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1525 && (cur_pattern->target_id != device->target->target_id))
1528 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1529 && (cur_pattern->target_lun != device->lun_id))
1532 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1533 && (cam_quirkmatch((caddr_t)&device->inq_data,
1534 (caddr_t)&cur_pattern->data.inq_pat,
1535 1, sizeof(cur_pattern->data.inq_pat),
1536 scsi_static_inquiry_match) == NULL))
1539 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1540 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1541 && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1542 || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1543 device->device_id_len
1544 - SVPD_DEVICE_ID_HDR_LEN,
1545 cur_pattern->data.devid_pat.id,
1546 cur_pattern->data.devid_pat.id_len) != 0))
1551 * If we get to this point, the user definitely wants
1552 * information on this device. So tell the caller to copy
1555 retval |= DM_RET_COPY;
1558 * If the return action has been set to descend, then we
1559 * know that we've already seen a peripheral matching
1560 * expression, therefore we need to further descend the tree.
1561 * This won't change by continuing around the loop, so we
1562 * go ahead and return. If we haven't seen a peripheral
1563 * matching expression, we keep going around the loop until
1564 * we exhaust the matching expressions. We'll set the stop
1565 * flag once we fall out of the loop.
1567 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1572 * If the return action hasn't been set to descend yet, that means
1573 * we haven't seen any peripheral matching patterns. So tell the
1574 * caller to stop descending the tree -- the user doesn't want to
1575 * match against lower level tree elements.
1577 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1578 retval |= DM_RET_STOP;
1584 * Match a single peripheral against any number of match patterns.
1586 static dev_match_ret
1587 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1588 struct cam_periph *periph)
1590 dev_match_ret retval;
1594 * If we aren't given something to match against, that's an error.
1597 return(DM_RET_ERROR);
1600 * If there are no match entries, then this peripheral matches no
1603 if ((patterns == NULL) || (num_patterns == 0))
1604 return(DM_RET_STOP | DM_RET_COPY);
1607 * There aren't any nodes below a peripheral node, so there's no
1608 * reason to descend the tree any further.
1610 retval = DM_RET_STOP;
1612 for (i = 0; i < num_patterns; i++) {
1613 struct periph_match_pattern *cur_pattern;
1616 * If the pattern in question isn't for a peripheral, we
1617 * aren't interested.
1619 if (patterns[i].type != DEV_MATCH_PERIPH)
1622 cur_pattern = &patterns[i].pattern.periph_pattern;
1625 * If they want to match on anything, then we will do so.
1627 if (cur_pattern->flags == PERIPH_MATCH_ANY) {
1628 /* set the copy flag */
1629 retval |= DM_RET_COPY;
1632 * We've already set the return action to stop,
1633 * since there are no nodes below peripherals in
1640 * Not sure why someone would do this...
1642 if (cur_pattern->flags == PERIPH_MATCH_NONE)
1645 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1646 && (cur_pattern->path_id != periph->path->bus->path_id))
1650 * For the target and lun id's, we have to make sure the
1651 * target and lun pointers aren't NULL. The xpt peripheral
1652 * has a wildcard target and device.
1654 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1655 && ((periph->path->target == NULL)
1656 ||(cur_pattern->target_id != periph->path->target->target_id)))
1659 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1660 && ((periph->path->device == NULL)
1661 || (cur_pattern->target_lun != periph->path->device->lun_id)))
1664 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1665 && (cur_pattern->unit_number != periph->unit_number))
1668 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1669 && (strncmp(cur_pattern->periph_name, periph->periph_name,
1674 * If we get to this point, the user definitely wants
1675 * information on this peripheral. So tell the caller to
1676 * copy the data out.
1678 retval |= DM_RET_COPY;
1681 * The return action has already been set to stop, since
1682 * peripherals don't have any nodes below them in the EDT.
1688 * If we get to this point, the peripheral that was passed in
1689 * doesn't match any of the patterns.
1695 xptedtbusfunc(struct cam_eb *bus, void *arg)
1697 struct ccb_dev_match *cdm;
1698 struct cam_et *target;
1699 dev_match_ret retval;
1701 cdm = (struct ccb_dev_match *)arg;
1704 * If our position is for something deeper in the tree, that means
1705 * that we've already seen this node. So, we keep going down.
1707 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1708 && (cdm->pos.cookie.bus == bus)
1709 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1710 && (cdm->pos.cookie.target != NULL))
1711 retval = DM_RET_DESCEND;
1713 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1716 * If we got an error, bail out of the search.
1718 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1719 cdm->status = CAM_DEV_MATCH_ERROR;
1724 * If the copy flag is set, copy this bus out.
1726 if (retval & DM_RET_COPY) {
1729 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1730 sizeof(struct dev_match_result));
1733 * If we don't have enough space to put in another
1734 * match result, save our position and tell the
1735 * user there are more devices to check.
1737 if (spaceleft < sizeof(struct dev_match_result)) {
1738 bzero(&cdm->pos, sizeof(cdm->pos));
1739 cdm->pos.position_type =
1740 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1742 cdm->pos.cookie.bus = bus;
1743 cdm->pos.generations[CAM_BUS_GENERATION]=
1744 xsoftc.bus_generation;
1745 cdm->status = CAM_DEV_MATCH_MORE;
1748 j = cdm->num_matches;
1750 cdm->matches[j].type = DEV_MATCH_BUS;
1751 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1752 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1753 cdm->matches[j].result.bus_result.unit_number =
1754 bus->sim->unit_number;
1755 strlcpy(cdm->matches[j].result.bus_result.dev_name,
1757 sizeof(cdm->matches[j].result.bus_result.dev_name));
1761 * If the user is only interested in buses, there's no
1762 * reason to descend to the next level in the tree.
1764 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1768 * If there is a target generation recorded, check it to
1769 * make sure the target list hasn't changed.
1771 mtx_lock(&bus->eb_mtx);
1772 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1773 && (cdm->pos.cookie.bus == bus)
1774 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1775 && (cdm->pos.cookie.target != NULL)) {
1776 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1778 mtx_unlock(&bus->eb_mtx);
1779 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1782 target = (struct cam_et *)cdm->pos.cookie.target;
1786 mtx_unlock(&bus->eb_mtx);
1788 return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1792 xptedttargetfunc(struct cam_et *target, void *arg)
1794 struct ccb_dev_match *cdm;
1796 struct cam_ed *device;
1798 cdm = (struct ccb_dev_match *)arg;
1802 * If there is a device list generation recorded, check it to
1803 * make sure the device list hasn't changed.
1805 mtx_lock(&bus->eb_mtx);
1806 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1807 && (cdm->pos.cookie.bus == bus)
1808 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1809 && (cdm->pos.cookie.target == target)
1810 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1811 && (cdm->pos.cookie.device != NULL)) {
1812 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1813 target->generation) {
1814 mtx_unlock(&bus->eb_mtx);
1815 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1818 device = (struct cam_ed *)cdm->pos.cookie.device;
1822 mtx_unlock(&bus->eb_mtx);
1824 return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1828 xptedtdevicefunc(struct cam_ed *device, void *arg)
1831 struct cam_periph *periph;
1832 struct ccb_dev_match *cdm;
1833 dev_match_ret retval;
1835 cdm = (struct ccb_dev_match *)arg;
1836 bus = device->target->bus;
1839 * If our position is for something deeper in the tree, that means
1840 * that we've already seen this node. So, we keep going down.
1842 if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1843 && (cdm->pos.cookie.device == device)
1844 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1845 && (cdm->pos.cookie.periph != NULL))
1846 retval = DM_RET_DESCEND;
1848 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1851 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1852 cdm->status = CAM_DEV_MATCH_ERROR;
1857 * If the copy flag is set, copy this device out.
1859 if (retval & DM_RET_COPY) {
1862 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1863 sizeof(struct dev_match_result));
1866 * If we don't have enough space to put in another
1867 * match result, save our position and tell the
1868 * user there are more devices to check.
1870 if (spaceleft < sizeof(struct dev_match_result)) {
1871 bzero(&cdm->pos, sizeof(cdm->pos));
1872 cdm->pos.position_type =
1873 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1874 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1876 cdm->pos.cookie.bus = device->target->bus;
1877 cdm->pos.generations[CAM_BUS_GENERATION]=
1878 xsoftc.bus_generation;
1879 cdm->pos.cookie.target = device->target;
1880 cdm->pos.generations[CAM_TARGET_GENERATION] =
1881 device->target->bus->generation;
1882 cdm->pos.cookie.device = device;
1883 cdm->pos.generations[CAM_DEV_GENERATION] =
1884 device->target->generation;
1885 cdm->status = CAM_DEV_MATCH_MORE;
1888 j = cdm->num_matches;
1890 cdm->matches[j].type = DEV_MATCH_DEVICE;
1891 cdm->matches[j].result.device_result.path_id =
1892 device->target->bus->path_id;
1893 cdm->matches[j].result.device_result.target_id =
1894 device->target->target_id;
1895 cdm->matches[j].result.device_result.target_lun =
1897 cdm->matches[j].result.device_result.protocol =
1899 bcopy(&device->inq_data,
1900 &cdm->matches[j].result.device_result.inq_data,
1901 sizeof(struct scsi_inquiry_data));
1902 bcopy(&device->ident_data,
1903 &cdm->matches[j].result.device_result.ident_data,
1904 sizeof(struct ata_params));
1906 /* Let the user know whether this device is unconfigured */
1907 if (device->flags & CAM_DEV_UNCONFIGURED)
1908 cdm->matches[j].result.device_result.flags =
1909 DEV_RESULT_UNCONFIGURED;
1911 cdm->matches[j].result.device_result.flags =
1916 * If the user isn't interested in peripherals, don't descend
1917 * the tree any further.
1919 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1923 * If there is a peripheral list generation recorded, make sure
1924 * it hasn't changed.
1927 mtx_lock(&bus->eb_mtx);
1928 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1929 && (cdm->pos.cookie.bus == bus)
1930 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1931 && (cdm->pos.cookie.target == device->target)
1932 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1933 && (cdm->pos.cookie.device == device)
1934 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1935 && (cdm->pos.cookie.periph != NULL)) {
1936 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1937 device->generation) {
1938 mtx_unlock(&bus->eb_mtx);
1940 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1943 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1947 mtx_unlock(&bus->eb_mtx);
1950 return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1954 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1956 struct ccb_dev_match *cdm;
1957 dev_match_ret retval;
1959 cdm = (struct ccb_dev_match *)arg;
1961 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1963 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1964 cdm->status = CAM_DEV_MATCH_ERROR;
1969 * If the copy flag is set, copy this peripheral out.
1971 if (retval & DM_RET_COPY) {
1975 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1976 sizeof(struct dev_match_result));
1979 * If we don't have enough space to put in another
1980 * match result, save our position and tell the
1981 * user there are more devices to check.
1983 if (spaceleft < sizeof(struct dev_match_result)) {
1984 bzero(&cdm->pos, sizeof(cdm->pos));
1985 cdm->pos.position_type =
1986 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1987 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
1990 cdm->pos.cookie.bus = periph->path->bus;
1991 cdm->pos.generations[CAM_BUS_GENERATION]=
1992 xsoftc.bus_generation;
1993 cdm->pos.cookie.target = periph->path->target;
1994 cdm->pos.generations[CAM_TARGET_GENERATION] =
1995 periph->path->bus->generation;
1996 cdm->pos.cookie.device = periph->path->device;
1997 cdm->pos.generations[CAM_DEV_GENERATION] =
1998 periph->path->target->generation;
1999 cdm->pos.cookie.periph = periph;
2000 cdm->pos.generations[CAM_PERIPH_GENERATION] =
2001 periph->path->device->generation;
2002 cdm->status = CAM_DEV_MATCH_MORE;
2006 j = cdm->num_matches;
2008 cdm->matches[j].type = DEV_MATCH_PERIPH;
2009 cdm->matches[j].result.periph_result.path_id =
2010 periph->path->bus->path_id;
2011 cdm->matches[j].result.periph_result.target_id =
2012 periph->path->target->target_id;
2013 cdm->matches[j].result.periph_result.target_lun =
2014 periph->path->device->lun_id;
2015 cdm->matches[j].result.periph_result.unit_number =
2016 periph->unit_number;
2017 l = sizeof(cdm->matches[j].result.periph_result.periph_name);
2018 strlcpy(cdm->matches[j].result.periph_result.periph_name,
2019 periph->periph_name, l);
2026 xptedtmatch(struct ccb_dev_match *cdm)
2031 cdm->num_matches = 0;
2034 * Check the bus list generation. If it has changed, the user
2035 * needs to reset everything and start over.
2038 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
2039 && (cdm->pos.cookie.bus != NULL)) {
2040 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
2041 xsoftc.bus_generation) {
2043 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
2046 bus = (struct cam_eb *)cdm->pos.cookie.bus;
2052 ret = xptbustraverse(bus, xptedtbusfunc, cdm);
2055 * If we get back 0, that means that we had to stop before fully
2056 * traversing the EDT. It also means that one of the subroutines
2057 * has set the status field to the proper value. If we get back 1,
2058 * we've fully traversed the EDT and copied out any matching entries.
2061 cdm->status = CAM_DEV_MATCH_LAST;
2067 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
2069 struct cam_periph *periph;
2070 struct ccb_dev_match *cdm;
2072 cdm = (struct ccb_dev_match *)arg;
2075 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2076 && (cdm->pos.cookie.pdrv == pdrv)
2077 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
2078 && (cdm->pos.cookie.periph != NULL)) {
2079 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
2080 (*pdrv)->generation) {
2082 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
2085 periph = (struct cam_periph *)cdm->pos.cookie.periph;
2091 return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
2095 xptplistperiphfunc(struct cam_periph *periph, void *arg)
2097 struct ccb_dev_match *cdm;
2098 dev_match_ret retval;
2100 cdm = (struct ccb_dev_match *)arg;
2102 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
2104 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
2105 cdm->status = CAM_DEV_MATCH_ERROR;
2110 * If the copy flag is set, copy this peripheral out.
2112 if (retval & DM_RET_COPY) {
2116 spaceleft = cdm->match_buf_len - (cdm->num_matches *
2117 sizeof(struct dev_match_result));
2120 * If we don't have enough space to put in another
2121 * match result, save our position and tell the
2122 * user there are more devices to check.
2124 if (spaceleft < sizeof(struct dev_match_result)) {
2125 struct periph_driver **pdrv;
2128 bzero(&cdm->pos, sizeof(cdm->pos));
2129 cdm->pos.position_type =
2130 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
2134 * This may look a bit non-sensical, but it is
2135 * actually quite logical. There are very few
2136 * peripheral drivers, and bloating every peripheral
2137 * structure with a pointer back to its parent
2138 * peripheral driver linker set entry would cost
2139 * more in the long run than doing this quick lookup.
2141 for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
2142 if (strcmp((*pdrv)->driver_name,
2143 periph->periph_name) == 0)
2147 if (*pdrv == NULL) {
2148 cdm->status = CAM_DEV_MATCH_ERROR;
2152 cdm->pos.cookie.pdrv = pdrv;
2154 * The periph generation slot does double duty, as
2155 * does the periph pointer slot. They are used for
2156 * both edt and pdrv lookups and positioning.
2158 cdm->pos.cookie.periph = periph;
2159 cdm->pos.generations[CAM_PERIPH_GENERATION] =
2160 (*pdrv)->generation;
2161 cdm->status = CAM_DEV_MATCH_MORE;
2165 j = cdm->num_matches;
2167 cdm->matches[j].type = DEV_MATCH_PERIPH;
2168 cdm->matches[j].result.periph_result.path_id =
2169 periph->path->bus->path_id;
2172 * The transport layer peripheral doesn't have a target or
2175 if (periph->path->target)
2176 cdm->matches[j].result.periph_result.target_id =
2177 periph->path->target->target_id;
2179 cdm->matches[j].result.periph_result.target_id =
2180 CAM_TARGET_WILDCARD;
2182 if (periph->path->device)
2183 cdm->matches[j].result.periph_result.target_lun =
2184 periph->path->device->lun_id;
2186 cdm->matches[j].result.periph_result.target_lun =
2189 cdm->matches[j].result.periph_result.unit_number =
2190 periph->unit_number;
2191 l = sizeof(cdm->matches[j].result.periph_result.periph_name);
2192 strlcpy(cdm->matches[j].result.periph_result.periph_name,
2193 periph->periph_name, l);
2200 xptperiphlistmatch(struct ccb_dev_match *cdm)
2204 cdm->num_matches = 0;
2207 * At this point in the edt traversal function, we check the bus
2208 * list generation to make sure that no buses have been added or
2209 * removed since the user last sent a XPT_DEV_MATCH ccb through.
2210 * For the peripheral driver list traversal function, however, we
2211 * don't have to worry about new peripheral driver types coming or
2212 * going; they're in a linker set, and therefore can't change
2213 * without a recompile.
2216 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2217 && (cdm->pos.cookie.pdrv != NULL))
2218 ret = xptpdrvtraverse(
2219 (struct periph_driver **)cdm->pos.cookie.pdrv,
2220 xptplistpdrvfunc, cdm);
2222 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2225 * If we get back 0, that means that we had to stop before fully
2226 * traversing the peripheral driver tree. It also means that one of
2227 * the subroutines has set the status field to the proper value. If
2228 * we get back 1, we've fully traversed the EDT and copied out any
2232 cdm->status = CAM_DEV_MATCH_LAST;
2238 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2240 struct cam_eb *bus, *next_bus;
2248 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2256 for (; bus != NULL; bus = next_bus) {
2257 retval = tr_func(bus, arg);
2259 xpt_release_bus(bus);
2263 next_bus = TAILQ_NEXT(bus, links);
2265 next_bus->refcount++;
2267 xpt_release_bus(bus);
2273 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2274 xpt_targetfunc_t *tr_func, void *arg)
2276 struct cam_et *target, *next_target;
2281 target = start_target;
2283 mtx_lock(&bus->eb_mtx);
2284 target = TAILQ_FIRST(&bus->et_entries);
2285 if (target == NULL) {
2286 mtx_unlock(&bus->eb_mtx);
2290 mtx_unlock(&bus->eb_mtx);
2292 for (; target != NULL; target = next_target) {
2293 retval = tr_func(target, arg);
2295 xpt_release_target(target);
2298 mtx_lock(&bus->eb_mtx);
2299 next_target = TAILQ_NEXT(target, links);
2301 next_target->refcount++;
2302 mtx_unlock(&bus->eb_mtx);
2303 xpt_release_target(target);
2309 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2310 xpt_devicefunc_t *tr_func, void *arg)
2313 struct cam_ed *device, *next_device;
2319 device = start_device;
2321 mtx_lock(&bus->eb_mtx);
2322 device = TAILQ_FIRST(&target->ed_entries);
2323 if (device == NULL) {
2324 mtx_unlock(&bus->eb_mtx);
2328 mtx_unlock(&bus->eb_mtx);
2330 for (; device != NULL; device = next_device) {
2331 mtx_lock(&device->device_mtx);
2332 retval = tr_func(device, arg);
2333 mtx_unlock(&device->device_mtx);
2335 xpt_release_device(device);
2338 mtx_lock(&bus->eb_mtx);
2339 next_device = TAILQ_NEXT(device, links);
2341 next_device->refcount++;
2342 mtx_unlock(&bus->eb_mtx);
2343 xpt_release_device(device);
2349 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2350 xpt_periphfunc_t *tr_func, void *arg)
2353 struct cam_periph *periph, *next_periph;
2358 bus = device->target->bus;
2360 periph = start_periph;
2363 mtx_lock(&bus->eb_mtx);
2364 periph = SLIST_FIRST(&device->periphs);
2365 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2366 periph = SLIST_NEXT(periph, periph_links);
2367 if (periph == NULL) {
2368 mtx_unlock(&bus->eb_mtx);
2373 mtx_unlock(&bus->eb_mtx);
2376 for (; periph != NULL; periph = next_periph) {
2377 retval = tr_func(periph, arg);
2379 cam_periph_release_locked(periph);
2383 mtx_lock(&bus->eb_mtx);
2384 next_periph = SLIST_NEXT(periph, periph_links);
2385 while (next_periph != NULL &&
2386 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2387 next_periph = SLIST_NEXT(next_periph, periph_links);
2389 next_periph->refcount++;
2390 mtx_unlock(&bus->eb_mtx);
2392 cam_periph_release_locked(periph);
2398 xptpdrvtraverse(struct periph_driver **start_pdrv,
2399 xpt_pdrvfunc_t *tr_func, void *arg)
2401 struct periph_driver **pdrv;
2407 * We don't traverse the peripheral driver list like we do the
2408 * other lists, because it is a linker set, and therefore cannot be
2409 * changed during runtime. If the peripheral driver list is ever
2410 * re-done to be something other than a linker set (i.e. it can
2411 * change while the system is running), the list traversal should
2412 * be modified to work like the other traversal functions.
2414 for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2415 *pdrv != NULL; pdrv++) {
2416 retval = tr_func(pdrv, arg);
2426 xptpdperiphtraverse(struct periph_driver **pdrv,
2427 struct cam_periph *start_periph,
2428 xpt_periphfunc_t *tr_func, void *arg)
2430 struct cam_periph *periph, *next_periph;
2436 periph = start_periph;
2439 periph = TAILQ_FIRST(&(*pdrv)->units);
2440 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2441 periph = TAILQ_NEXT(periph, unit_links);
2442 if (periph == NULL) {
2449 for (; periph != NULL; periph = next_periph) {
2450 cam_periph_lock(periph);
2451 retval = tr_func(periph, arg);
2452 cam_periph_unlock(periph);
2454 cam_periph_release(periph);
2458 next_periph = TAILQ_NEXT(periph, unit_links);
2459 while (next_periph != NULL &&
2460 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2461 next_periph = TAILQ_NEXT(next_periph, unit_links);
2463 next_periph->refcount++;
2465 cam_periph_release(periph);
2471 xptdefbusfunc(struct cam_eb *bus, void *arg)
2473 struct xpt_traverse_config *tr_config;
2475 tr_config = (struct xpt_traverse_config *)arg;
2477 if (tr_config->depth == XPT_DEPTH_BUS) {
2478 xpt_busfunc_t *tr_func;
2480 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2482 return(tr_func(bus, tr_config->tr_arg));
2484 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2488 xptdeftargetfunc(struct cam_et *target, void *arg)
2490 struct xpt_traverse_config *tr_config;
2492 tr_config = (struct xpt_traverse_config *)arg;
2494 if (tr_config->depth == XPT_DEPTH_TARGET) {
2495 xpt_targetfunc_t *tr_func;
2497 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2499 return(tr_func(target, tr_config->tr_arg));
2501 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2505 xptdefdevicefunc(struct cam_ed *device, void *arg)
2507 struct xpt_traverse_config *tr_config;
2509 tr_config = (struct xpt_traverse_config *)arg;
2511 if (tr_config->depth == XPT_DEPTH_DEVICE) {
2512 xpt_devicefunc_t *tr_func;
2514 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2516 return(tr_func(device, tr_config->tr_arg));
2518 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2522 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2524 struct xpt_traverse_config *tr_config;
2525 xpt_periphfunc_t *tr_func;
2527 tr_config = (struct xpt_traverse_config *)arg;
2529 tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2532 * Unlike the other default functions, we don't check for depth
2533 * here. The peripheral driver level is the last level in the EDT,
2534 * so if we're here, we should execute the function in question.
2536 return(tr_func(periph, tr_config->tr_arg));
2540 * Execute the given function for every bus in the EDT.
2543 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2545 struct xpt_traverse_config tr_config;
2547 tr_config.depth = XPT_DEPTH_BUS;
2548 tr_config.tr_func = tr_func;
2549 tr_config.tr_arg = arg;
2551 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2555 * Execute the given function for every device in the EDT.
2558 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2560 struct xpt_traverse_config tr_config;
2562 tr_config.depth = XPT_DEPTH_DEVICE;
2563 tr_config.tr_func = tr_func;
2564 tr_config.tr_arg = arg;
2566 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2570 xptsetasyncfunc(struct cam_ed *device, void *arg)
2572 struct cam_path path;
2573 struct ccb_getdev cgd;
2574 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2577 * Don't report unconfigured devices (Wildcard devs,
2578 * devices only for target mode, device instances
2579 * that have been invalidated but are waiting for
2580 * their last reference count to be released).
2582 if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2585 xpt_compile_path(&path,
2587 device->target->bus->path_id,
2588 device->target->target_id,
2590 xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2591 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2592 xpt_action((union ccb *)&cgd);
2593 csa->callback(csa->callback_arg,
2596 xpt_release_path(&path);
2602 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2604 struct cam_path path;
2605 struct ccb_pathinq cpi;
2606 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2608 xpt_compile_path(&path, /*periph*/NULL,
2610 CAM_TARGET_WILDCARD,
2612 xpt_path_lock(&path);
2613 xpt_path_inq(&cpi, &path);
2614 csa->callback(csa->callback_arg,
2617 xpt_path_unlock(&path);
2618 xpt_release_path(&path);
2624 xpt_action(union ccb *start_ccb)
2627 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
2628 ("xpt_action: func %#x %s\n", start_ccb->ccb_h.func_code,
2629 xpt_action_name(start_ccb->ccb_h.func_code)));
2631 start_ccb->ccb_h.status = CAM_REQ_INPROG;
2632 (*(start_ccb->ccb_h.path->bus->xport->ops->action))(start_ccb);
2636 xpt_action_default(union ccb *start_ccb)
2638 struct cam_path *path;
2639 struct cam_sim *sim;
2642 path = start_ccb->ccb_h.path;
2643 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2644 ("xpt_action_default: func %#x %s\n", start_ccb->ccb_h.func_code,
2645 xpt_action_name(start_ccb->ccb_h.func_code)));
2647 switch (start_ccb->ccb_h.func_code) {
2650 struct cam_ed *device;
2653 * For the sake of compatibility with SCSI-1
2654 * devices that may not understand the identify
2655 * message, we include lun information in the
2656 * second byte of all commands. SCSI-1 specifies
2657 * that luns are a 3 bit value and reserves only 3
2658 * bits for lun information in the CDB. Later
2659 * revisions of the SCSI spec allow for more than 8
2660 * luns, but have deprecated lun information in the
2661 * CDB. So, if the lun won't fit, we must omit.
2663 * Also be aware that during initial probing for devices,
2664 * the inquiry information is unknown but initialized to 0.
2665 * This means that this code will be exercised while probing
2666 * devices with an ANSI revision greater than 2.
2668 device = path->device;
2669 if (device->protocol_version <= SCSI_REV_2
2670 && start_ccb->ccb_h.target_lun < 8
2671 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2673 start_ccb->csio.cdb_io.cdb_bytes[1] |=
2674 start_ccb->ccb_h.target_lun << 5;
2676 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2680 case XPT_CONT_TARGET_IO:
2681 start_ccb->csio.sense_resid = 0;
2682 start_ccb->csio.resid = 0;
2685 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2686 start_ccb->ataio.resid = 0;
2690 case XPT_NVME_ADMIN:
2693 /* XXX just like nmve_io? */
2698 struct cam_devq *devq;
2700 devq = path->bus->sim->devq;
2701 mtx_lock(&devq->send_mtx);
2702 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2703 if (xpt_schedule_devq(devq, path->device) != 0)
2705 mtx_unlock(&devq->send_mtx);
2708 case XPT_CALC_GEOMETRY:
2709 /* Filter out garbage */
2710 if (start_ccb->ccg.block_size == 0
2711 || start_ccb->ccg.volume_size == 0) {
2712 start_ccb->ccg.cylinders = 0;
2713 start_ccb->ccg.heads = 0;
2714 start_ccb->ccg.secs_per_track = 0;
2715 start_ccb->ccb_h.status = CAM_REQ_CMP;
2721 union ccb* abort_ccb;
2723 abort_ccb = start_ccb->cab.abort_ccb;
2724 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2725 struct cam_ed *device;
2726 struct cam_devq *devq;
2728 device = abort_ccb->ccb_h.path->device;
2729 devq = device->sim->devq;
2731 mtx_lock(&devq->send_mtx);
2732 if (abort_ccb->ccb_h.pinfo.index > 0) {
2733 cam_ccbq_remove_ccb(&device->ccbq, abort_ccb);
2734 abort_ccb->ccb_h.status =
2735 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2736 xpt_freeze_devq_device(device, 1);
2737 mtx_unlock(&devq->send_mtx);
2738 xpt_done(abort_ccb);
2739 start_ccb->ccb_h.status = CAM_REQ_CMP;
2742 mtx_unlock(&devq->send_mtx);
2744 if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2745 && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2747 * We've caught this ccb en route to
2748 * the SIM. Flag it for abort and the
2749 * SIM will do so just before starting
2750 * real work on the CCB.
2752 abort_ccb->ccb_h.status =
2753 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2754 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2755 start_ccb->ccb_h.status = CAM_REQ_CMP;
2759 if (XPT_FC_IS_QUEUED(abort_ccb)
2760 && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2762 * It's already completed but waiting
2763 * for our SWI to get to it.
2765 start_ccb->ccb_h.status = CAM_UA_ABORT;
2769 * If we weren't able to take care of the abort request
2770 * in the XPT, pass the request down to the SIM for processing.
2774 case XPT_ACCEPT_TARGET_IO:
2776 case XPT_IMMED_NOTIFY:
2777 case XPT_NOTIFY_ACK:
2779 case XPT_IMMEDIATE_NOTIFY:
2780 case XPT_NOTIFY_ACKNOWLEDGE:
2781 case XPT_GET_SIM_KNOB_OLD:
2782 case XPT_GET_SIM_KNOB:
2783 case XPT_SET_SIM_KNOB:
2784 case XPT_GET_TRAN_SETTINGS:
2785 case XPT_SET_TRAN_SETTINGS:
2788 sim = path->bus->sim;
2790 if (mtx && !mtx_owned(mtx))
2795 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2796 ("Calling sim->sim_action(): func=%#x\n", start_ccb->ccb_h.func_code));
2797 (*(sim->sim_action))(sim, start_ccb);
2798 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2799 ("sim->sim_action returned: status=%#x\n", start_ccb->ccb_h.status));
2803 case XPT_PATH_STATS:
2804 start_ccb->cpis.last_reset = path->bus->last_reset;
2805 start_ccb->ccb_h.status = CAM_REQ_CMP;
2812 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2813 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2815 struct ccb_getdev *cgd;
2817 cgd = &start_ccb->cgd;
2818 cgd->protocol = dev->protocol;
2819 cgd->inq_data = dev->inq_data;
2820 cgd->ident_data = dev->ident_data;
2821 cgd->inq_flags = dev->inq_flags;
2822 cgd->ccb_h.status = CAM_REQ_CMP;
2823 cgd->serial_num_len = dev->serial_num_len;
2824 if ((dev->serial_num_len > 0)
2825 && (dev->serial_num != NULL))
2826 bcopy(dev->serial_num, cgd->serial_num,
2827 dev->serial_num_len);
2831 case XPT_GDEV_STATS:
2833 struct ccb_getdevstats *cgds = &start_ccb->cgds;
2834 struct cam_ed *dev = path->device;
2835 struct cam_eb *bus = path->bus;
2836 struct cam_et *tar = path->target;
2837 struct cam_devq *devq = bus->sim->devq;
2839 mtx_lock(&devq->send_mtx);
2840 cgds->dev_openings = dev->ccbq.dev_openings;
2841 cgds->dev_active = dev->ccbq.dev_active;
2842 cgds->allocated = dev->ccbq.allocated;
2843 cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2844 cgds->held = cgds->allocated - cgds->dev_active - cgds->queued;
2845 cgds->last_reset = tar->last_reset;
2846 cgds->maxtags = dev->maxtags;
2847 cgds->mintags = dev->mintags;
2848 if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2849 cgds->last_reset = bus->last_reset;
2850 mtx_unlock(&devq->send_mtx);
2851 cgds->ccb_h.status = CAM_REQ_CMP;
2856 struct cam_periph *nperiph;
2857 struct periph_list *periph_head;
2858 struct ccb_getdevlist *cgdl;
2860 struct cam_ed *device;
2867 * Don't want anyone mucking with our data.
2869 device = path->device;
2870 periph_head = &device->periphs;
2871 cgdl = &start_ccb->cgdl;
2874 * Check and see if the list has changed since the user
2875 * last requested a list member. If so, tell them that the
2876 * list has changed, and therefore they need to start over
2877 * from the beginning.
2879 if ((cgdl->index != 0) &&
2880 (cgdl->generation != device->generation)) {
2881 cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2886 * Traverse the list of peripherals and attempt to find
2887 * the requested peripheral.
2889 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2890 (nperiph != NULL) && (i <= cgdl->index);
2891 nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2892 if (i == cgdl->index) {
2893 strlcpy(cgdl->periph_name,
2894 nperiph->periph_name,
2895 sizeof(cgdl->periph_name));
2896 cgdl->unit_number = nperiph->unit_number;
2901 cgdl->status = CAM_GDEVLIST_ERROR;
2905 if (nperiph == NULL)
2906 cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2908 cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2911 cgdl->generation = device->generation;
2913 cgdl->ccb_h.status = CAM_REQ_CMP;
2918 dev_pos_type position_type;
2919 struct ccb_dev_match *cdm;
2921 cdm = &start_ccb->cdm;
2924 * There are two ways of getting at information in the EDT.
2925 * The first way is via the primary EDT tree. It starts
2926 * with a list of buses, then a list of targets on a bus,
2927 * then devices/luns on a target, and then peripherals on a
2928 * device/lun. The "other" way is by the peripheral driver
2929 * lists. The peripheral driver lists are organized by
2930 * peripheral driver. (obviously) So it makes sense to
2931 * use the peripheral driver list if the user is looking
2932 * for something like "da1", or all "da" devices. If the
2933 * user is looking for something on a particular bus/target
2934 * or lun, it's generally better to go through the EDT tree.
2937 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2938 position_type = cdm->pos.position_type;
2942 position_type = CAM_DEV_POS_NONE;
2944 for (i = 0; i < cdm->num_patterns; i++) {
2945 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2946 ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2947 position_type = CAM_DEV_POS_EDT;
2952 if (cdm->num_patterns == 0)
2953 position_type = CAM_DEV_POS_EDT;
2954 else if (position_type == CAM_DEV_POS_NONE)
2955 position_type = CAM_DEV_POS_PDRV;
2958 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2959 case CAM_DEV_POS_EDT:
2962 case CAM_DEV_POS_PDRV:
2963 xptperiphlistmatch(cdm);
2966 cdm->status = CAM_DEV_MATCH_ERROR;
2970 if (cdm->status == CAM_DEV_MATCH_ERROR)
2971 start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2973 start_ccb->ccb_h.status = CAM_REQ_CMP;
2979 struct ccb_setasync *csa;
2980 struct async_node *cur_entry;
2981 struct async_list *async_head;
2984 csa = &start_ccb->csa;
2985 added = csa->event_enable;
2986 async_head = &path->device->asyncs;
2989 * If there is already an entry for us, simply
2992 cur_entry = SLIST_FIRST(async_head);
2993 while (cur_entry != NULL) {
2994 if ((cur_entry->callback_arg == csa->callback_arg)
2995 && (cur_entry->callback == csa->callback))
2997 cur_entry = SLIST_NEXT(cur_entry, links);
3000 if (cur_entry != NULL) {
3002 * If the request has no flags set,
3005 added &= ~cur_entry->event_enable;
3006 if (csa->event_enable == 0) {
3007 SLIST_REMOVE(async_head, cur_entry,
3009 xpt_release_device(path->device);
3010 free(cur_entry, M_CAMXPT);
3012 cur_entry->event_enable = csa->event_enable;
3014 csa->event_enable = added;
3016 cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
3018 if (cur_entry == NULL) {
3019 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
3022 cur_entry->event_enable = csa->event_enable;
3023 cur_entry->event_lock = (path->bus->sim->mtx &&
3024 mtx_owned(path->bus->sim->mtx)) ? 1 : 0;
3025 cur_entry->callback_arg = csa->callback_arg;
3026 cur_entry->callback = csa->callback;
3027 SLIST_INSERT_HEAD(async_head, cur_entry, links);
3028 xpt_acquire_device(path->device);
3030 start_ccb->ccb_h.status = CAM_REQ_CMP;
3035 struct ccb_relsim *crs;
3038 crs = &start_ccb->crs;
3042 crs->ccb_h.status = CAM_DEV_NOT_THERE;
3046 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
3048 /* Don't ever go below one opening */
3049 if (crs->openings > 0) {
3050 xpt_dev_ccbq_resize(path, crs->openings);
3053 "number of openings is now %d\n",
3059 mtx_lock(&dev->sim->devq->send_mtx);
3060 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
3062 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
3065 * Just extend the old timeout and decrement
3066 * the freeze count so that a single timeout
3067 * is sufficient for releasing the queue.
3069 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
3070 callout_stop(&dev->callout);
3073 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
3076 callout_reset_sbt(&dev->callout,
3077 SBT_1MS * crs->release_timeout, 0,
3078 xpt_release_devq_timeout, dev, 0);
3080 dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
3084 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
3086 if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
3088 * Decrement the freeze count so that a single
3089 * completion is still sufficient to unfreeze
3092 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
3095 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
3096 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
3100 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
3102 if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
3103 || (dev->ccbq.dev_active == 0)) {
3105 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
3108 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
3109 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
3112 mtx_unlock(&dev->sim->devq->send_mtx);
3114 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
3115 xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
3116 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
3117 start_ccb->ccb_h.status = CAM_REQ_CMP;
3121 struct cam_path *oldpath;
3123 /* Check that all request bits are supported. */
3124 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
3125 start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
3129 cam_dflags = CAM_DEBUG_NONE;
3130 if (cam_dpath != NULL) {
3131 oldpath = cam_dpath;
3133 xpt_free_path(oldpath);
3135 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
3136 if (xpt_create_path(&cam_dpath, NULL,
3137 start_ccb->ccb_h.path_id,
3138 start_ccb->ccb_h.target_id,
3139 start_ccb->ccb_h.target_lun) !=
3141 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3143 cam_dflags = start_ccb->cdbg.flags;
3144 start_ccb->ccb_h.status = CAM_REQ_CMP;
3145 xpt_print(cam_dpath, "debugging flags now %x\n",
3149 start_ccb->ccb_h.status = CAM_REQ_CMP;
3153 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
3154 xpt_freeze_devq(path, 1);
3155 start_ccb->ccb_h.status = CAM_REQ_CMP;
3157 case XPT_REPROBE_LUN:
3158 xpt_async(AC_INQ_CHANGED, path, NULL);
3159 start_ccb->ccb_h.status = CAM_REQ_CMP;
3160 xpt_done(start_ccb);
3167 xpt_print(start_ccb->ccb_h.path,
3168 "%s: CCB type %#x %s not supported\n", __func__,
3169 start_ccb->ccb_h.func_code,
3170 xpt_action_name(start_ccb->ccb_h.func_code));
3171 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
3172 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
3173 xpt_done(start_ccb);
3177 CAM_DEBUG(path, CAM_DEBUG_TRACE,
3178 ("xpt_action_default: func= %#x %s status %#x\n",
3179 start_ccb->ccb_h.func_code,
3180 xpt_action_name(start_ccb->ccb_h.func_code),
3181 start_ccb->ccb_h.status));
3185 * Call the sim poll routine to allow the sim to complete
3186 * any inflight requests, then call camisr_runqueue to
3187 * complete any CCB that the polling completed.
3190 xpt_sim_poll(struct cam_sim *sim)
3197 (*(sim->sim_poll))(sim);
3204 xpt_poll_setup(union ccb *start_ccb)
3207 struct cam_sim *sim;
3208 struct cam_devq *devq;
3211 timeout = start_ccb->ccb_h.timeout * 10;
3212 sim = start_ccb->ccb_h.path->bus->sim;
3214 dev = start_ccb->ccb_h.path->device;
3217 * Steal an opening so that no other queued requests
3218 * can get it before us while we simulate interrupts.
3220 mtx_lock(&devq->send_mtx);
3221 dev->ccbq.dev_openings--;
3222 while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3224 mtx_unlock(&devq->send_mtx);
3227 mtx_lock(&devq->send_mtx);
3229 dev->ccbq.dev_openings++;
3230 mtx_unlock(&devq->send_mtx);
3236 xpt_pollwait(union ccb *start_ccb, uint32_t timeout)
3239 while (--timeout > 0) {
3240 xpt_sim_poll(start_ccb->ccb_h.path->bus->sim);
3241 if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
3249 * XXX Is it worth adding a sim_timeout entry
3250 * point so we can attempt recovery? If
3251 * this is only used for dumps, I don't think
3254 start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3259 xpt_polled_action(union ccb *start_ccb)
3264 timeout = start_ccb->ccb_h.timeout * 10;
3265 dev = start_ccb->ccb_h.path->device;
3267 mtx_unlock(&dev->device_mtx);
3269 timeout = xpt_poll_setup(start_ccb);
3271 xpt_action(start_ccb);
3272 xpt_pollwait(start_ccb, timeout);
3274 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3277 mtx_lock(&dev->device_mtx);
3281 * Schedule a peripheral driver to receive a ccb when its
3282 * target device has space for more transactions.
3285 xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
3288 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3289 cam_periph_assert(periph, MA_OWNED);
3290 if (new_priority < periph->scheduled_priority) {
3291 periph->scheduled_priority = new_priority;
3292 xpt_run_allocq(periph, 0);
3298 * Schedule a device to run on a given queue.
3299 * If the device was inserted as a new entry on the queue,
3300 * return 1 meaning the device queue should be run. If we
3301 * were already queued, implying someone else has already
3302 * started the queue, return 0 so the caller doesn't attempt
3306 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3307 u_int32_t new_priority)
3310 u_int32_t old_priority;
3312 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3315 old_priority = pinfo->priority;
3318 * Are we already queued?
3320 if (pinfo->index != CAM_UNQUEUED_INDEX) {
3321 /* Simply reorder based on new priority */
3322 if (new_priority < old_priority) {
3323 camq_change_priority(queue, pinfo->index,
3325 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3326 ("changed priority to %d\n",
3332 /* New entry on the queue */
3333 if (new_priority < old_priority)
3334 pinfo->priority = new_priority;
3336 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3337 ("Inserting onto queue\n"));
3338 pinfo->generation = ++queue->generation;
3339 camq_insert(queue, pinfo);
3346 xpt_run_allocq_task(void *context, int pending)
3348 struct cam_periph *periph = context;
3350 cam_periph_lock(periph);
3351 periph->flags &= ~CAM_PERIPH_RUN_TASK;
3352 xpt_run_allocq(periph, 1);
3353 cam_periph_unlock(periph);
3354 cam_periph_release(periph);
3358 xpt_run_allocq(struct cam_periph *periph, int sleep)
3360 struct cam_ed *device;
3364 cam_periph_assert(periph, MA_OWNED);
3365 if (periph->periph_allocating)
3367 cam_periph_doacquire(periph);
3368 periph->periph_allocating = 1;
3369 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3370 device = periph->path->device;
3373 while ((prio = min(periph->scheduled_priority,
3374 periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3375 (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3376 device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3379 (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3381 ccb = xpt_get_ccb(periph);
3384 if (periph->flags & CAM_PERIPH_RUN_TASK)
3386 cam_periph_doacquire(periph);
3387 periph->flags |= CAM_PERIPH_RUN_TASK;
3388 taskqueue_enqueue(xsoftc.xpt_taskq,
3389 &periph->periph_run_task);
3392 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3393 if (prio == periph->immediate_priority) {
3394 periph->immediate_priority = CAM_PRIORITY_NONE;
3395 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3396 ("waking cam_periph_getccb()\n"));
3397 SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3399 wakeup(&periph->ccb_list);
3401 periph->scheduled_priority = CAM_PRIORITY_NONE;
3402 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3403 ("calling periph_start()\n"));
3404 periph->periph_start(periph, ccb);
3409 xpt_release_ccb(ccb);
3410 periph->periph_allocating = 0;
3411 cam_periph_release_locked(periph);
3415 xpt_run_devq(struct cam_devq *devq)
3419 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3421 devq->send_queue.qfrozen_cnt++;
3422 while ((devq->send_queue.entries > 0)
3423 && (devq->send_openings > 0)
3424 && (devq->send_queue.qfrozen_cnt <= 1)) {
3425 struct cam_ed *device;
3426 union ccb *work_ccb;
3427 struct cam_sim *sim;
3428 struct xpt_proto *proto;
3430 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3432 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3433 ("running device %p\n", device));
3435 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3436 if (work_ccb == NULL) {
3437 printf("device on run queue with no ccbs???\n");
3441 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3443 mtx_lock(&xsoftc.xpt_highpower_lock);
3444 if (xsoftc.num_highpower <= 0) {
3446 * We got a high power command, but we
3447 * don't have any available slots. Freeze
3448 * the device queue until we have a slot
3451 xpt_freeze_devq_device(device, 1);
3452 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3455 mtx_unlock(&xsoftc.xpt_highpower_lock);
3459 * Consume a high power slot while
3462 xsoftc.num_highpower--;
3464 mtx_unlock(&xsoftc.xpt_highpower_lock);
3466 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3467 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3468 devq->send_openings--;
3469 devq->send_active++;
3470 xpt_schedule_devq(devq, device);
3471 mtx_unlock(&devq->send_mtx);
3473 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3475 * The client wants to freeze the queue
3476 * after this CCB is sent.
3478 xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3481 /* In Target mode, the peripheral driver knows best... */
3482 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3483 if ((device->inq_flags & SID_CmdQue) != 0
3484 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3485 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3488 * Clear this in case of a retried CCB that
3489 * failed due to a rejected tag.
3491 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3494 KASSERT(device == work_ccb->ccb_h.path->device,
3495 ("device (%p) / path->device (%p) mismatch",
3496 device, work_ccb->ccb_h.path->device));
3497 proto = xpt_proto_find(device->protocol);
3498 if (proto && proto->ops->debug_out)
3499 proto->ops->debug_out(work_ccb);
3502 * Device queues can be shared among multiple SIM instances
3503 * that reside on different buses. Use the SIM from the
3504 * queued device, rather than the one from the calling bus.
3508 if (mtx && !mtx_owned(mtx))
3512 work_ccb->ccb_h.qos.periph_data = cam_iosched_now();
3513 (*(sim->sim_action))(sim, work_ccb);
3516 mtx_lock(&devq->send_mtx);
3518 devq->send_queue.qfrozen_cnt--;
3522 * This function merges stuff from the slave ccb into the master ccb, while
3523 * keeping important fields in the master ccb constant.
3526 xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb)
3530 * Pull fields that are valid for peripheral drivers to set
3531 * into the master CCB along with the CCB "payload".
3533 master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count;
3534 master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code;
3535 master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout;
3536 master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags;
3537 bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1],
3538 sizeof(union ccb) - sizeof(struct ccb_hdr));
3542 xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path,
3543 u_int32_t priority, u_int32_t flags)
3546 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3547 ccb_h->pinfo.priority = priority;
3549 ccb_h->path_id = path->bus->path_id;
3551 ccb_h->target_id = path->target->target_id;
3553 ccb_h->target_id = CAM_TARGET_WILDCARD;
3555 ccb_h->target_lun = path->device->lun_id;
3556 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3558 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3560 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3561 ccb_h->flags = flags;
3566 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
3568 xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0);
3571 /* Path manipulation functions */
3573 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3574 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3576 struct cam_path *path;
3579 path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3582 status = CAM_RESRC_UNAVAIL;
3585 status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3586 if (status != CAM_REQ_CMP) {
3587 free(path, M_CAMPATH);
3590 *new_path_ptr = path;
3595 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3596 struct cam_periph *periph, path_id_t path_id,
3597 target_id_t target_id, lun_id_t lun_id)
3600 return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3605 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3606 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3609 struct cam_et *target;
3610 struct cam_ed *device;
3613 status = CAM_REQ_CMP; /* Completed without error */
3614 target = NULL; /* Wildcarded */
3615 device = NULL; /* Wildcarded */
3618 * We will potentially modify the EDT, so block interrupts
3619 * that may attempt to create cam paths.
3621 bus = xpt_find_bus(path_id);
3623 status = CAM_PATH_INVALID;
3626 mtx_lock(&bus->eb_mtx);
3627 target = xpt_find_target(bus, target_id);
3628 if (target == NULL) {
3630 struct cam_et *new_target;
3632 new_target = xpt_alloc_target(bus, target_id);
3633 if (new_target == NULL) {
3634 status = CAM_RESRC_UNAVAIL;
3636 target = new_target;
3640 if (target != NULL) {
3641 device = xpt_find_device(target, lun_id);
3642 if (device == NULL) {
3644 struct cam_ed *new_device;
3647 (*(bus->xport->ops->alloc_device))(bus,
3650 if (new_device == NULL) {
3651 status = CAM_RESRC_UNAVAIL;
3653 device = new_device;
3657 mtx_unlock(&bus->eb_mtx);
3661 * Only touch the user's data if we are successful.
3663 if (status == CAM_REQ_CMP) {
3664 new_path->periph = perph;
3665 new_path->bus = bus;
3666 new_path->target = target;
3667 new_path->device = device;
3668 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3671 xpt_release_device(device);
3673 xpt_release_target(target);
3675 xpt_release_bus(bus);
3681 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3683 struct cam_path *new_path;
3685 new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3686 if (new_path == NULL)
3687 return(CAM_RESRC_UNAVAIL);
3688 xpt_copy_path(new_path, path);
3689 *new_path_ptr = new_path;
3690 return (CAM_REQ_CMP);
3694 xpt_copy_path(struct cam_path *new_path, struct cam_path *path)
3698 if (path->bus != NULL)
3699 xpt_acquire_bus(path->bus);
3700 if (path->target != NULL)
3701 xpt_acquire_target(path->target);
3702 if (path->device != NULL)
3703 xpt_acquire_device(path->device);
3707 xpt_release_path(struct cam_path *path)
3709 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3710 if (path->device != NULL) {
3711 xpt_release_device(path->device);
3712 path->device = NULL;
3714 if (path->target != NULL) {
3715 xpt_release_target(path->target);
3716 path->target = NULL;
3718 if (path->bus != NULL) {
3719 xpt_release_bus(path->bus);
3725 xpt_free_path(struct cam_path *path)
3728 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3729 xpt_release_path(path);
3730 free(path, M_CAMPATH);
3734 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3735 uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3741 *bus_ref = path->bus->refcount;
3747 *periph_ref = path->periph->refcount;
3754 *target_ref = path->target->refcount;
3760 *device_ref = path->device->refcount;
3767 * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3768 * in path1, 2 for match with wildcards in path2.
3771 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3775 if (path1->bus != path2->bus) {
3776 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3778 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3783 if (path1->target != path2->target) {
3784 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3787 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3792 if (path1->device != path2->device) {
3793 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3796 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3805 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3809 if (path->bus != dev->target->bus) {
3810 if (path->bus->path_id == CAM_BUS_WILDCARD)
3812 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3817 if (path->target != dev->target) {
3818 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3821 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3826 if (path->device != dev) {
3827 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3830 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3839 xpt_print_path(struct cam_path *path)
3842 char buffer[XPT_PRINT_LEN];
3844 sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
3845 xpt_path_sbuf(path, &sb);
3847 printf("%s", sbuf_data(&sb));
3852 xpt_print_device(struct cam_ed *device)
3856 printf("(nopath): ");
3858 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3859 device->sim->unit_number,
3860 device->sim->bus_id,
3861 device->target->target_id,
3862 (uintmax_t)device->lun_id);
3867 xpt_print(struct cam_path *path, const char *fmt, ...)
3871 char buffer[XPT_PRINT_LEN];
3873 sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
3875 xpt_path_sbuf(path, &sb);
3877 sbuf_vprintf(&sb, fmt, ap);
3881 printf("%s", sbuf_data(&sb));
3886 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3891 sbuf_new(&sb, str, str_len, 0);
3892 len = xpt_path_sbuf(path, &sb);
3898 xpt_path_sbuf(struct cam_path *path, struct sbuf *sb)
3902 sbuf_printf(sb, "(nopath): ");
3904 if (path->periph != NULL)
3905 sbuf_printf(sb, "(%s%d:", path->periph->periph_name,
3906 path->periph->unit_number);
3908 sbuf_printf(sb, "(noperiph:");
3910 if (path->bus != NULL)
3911 sbuf_printf(sb, "%s%d:%d:", path->bus->sim->sim_name,
3912 path->bus->sim->unit_number,
3913 path->bus->sim->bus_id);
3915 sbuf_printf(sb, "nobus:");
3917 if (path->target != NULL)
3918 sbuf_printf(sb, "%d:", path->target->target_id);
3920 sbuf_printf(sb, "X:");
3922 if (path->device != NULL)
3923 sbuf_printf(sb, "%jx): ",
3924 (uintmax_t)path->device->lun_id);
3926 sbuf_printf(sb, "X): ");
3929 return(sbuf_len(sb));
3933 xpt_path_path_id(struct cam_path *path)
3935 return(path->bus->path_id);
3939 xpt_path_target_id(struct cam_path *path)
3941 if (path->target != NULL)
3942 return (path->target->target_id);
3944 return (CAM_TARGET_WILDCARD);
3948 xpt_path_lun_id(struct cam_path *path)
3950 if (path->device != NULL)
3951 return (path->device->lun_id);
3953 return (CAM_LUN_WILDCARD);
3957 xpt_path_sim(struct cam_path *path)
3960 return (path->bus->sim);
3964 xpt_path_periph(struct cam_path *path)
3967 return (path->periph);
3971 * Release a CAM control block for the caller. Remit the cost of the structure
3972 * to the device referenced by the path. If the this device had no 'credits'
3973 * and peripheral drivers have registered async callbacks for this notification
3977 xpt_release_ccb(union ccb *free_ccb)
3979 struct cam_ed *device;
3980 struct cam_periph *periph;
3982 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
3983 xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
3984 device = free_ccb->ccb_h.path->device;
3985 periph = free_ccb->ccb_h.path->periph;
3987 xpt_free_ccb(free_ccb);
3988 periph->periph_allocated--;
3989 cam_ccbq_release_opening(&device->ccbq);
3990 xpt_run_allocq(periph, 0);
3993 /* Functions accessed by SIM drivers */
3995 static struct xpt_xport_ops xport_default_ops = {
3996 .alloc_device = xpt_alloc_device_default,
3997 .action = xpt_action_default,
3998 .async = xpt_dev_async_default,
4000 static struct xpt_xport xport_default = {
4001 .xport = XPORT_UNKNOWN,
4003 .ops = &xport_default_ops,
4006 CAM_XPT_XPORT(xport_default);
4009 * A sim structure, listing the SIM entry points and instance
4010 * identification info is passed to xpt_bus_register to hook the SIM
4011 * into the CAM framework. xpt_bus_register creates a cam_eb entry
4012 * for this new bus and places it in the array of buses and assigns
4013 * it a path_id. The path_id may be influenced by "hard wiring"
4014 * information specified by the user. Once interrupt services are
4015 * available, the bus will be probed.
4018 xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
4020 struct cam_eb *new_bus;
4021 struct cam_eb *old_bus;
4022 struct ccb_pathinq cpi;
4023 struct cam_path *path;
4027 new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
4028 M_CAMXPT, M_NOWAIT|M_ZERO);
4029 if (new_bus == NULL) {
4030 /* Couldn't satisfy request */
4031 return (CAM_RESRC_UNAVAIL);
4034 mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
4035 TAILQ_INIT(&new_bus->et_entries);
4038 timevalclear(&new_bus->last_reset);
4040 new_bus->refcount = 1; /* Held until a bus_deregister event */
4041 new_bus->generation = 0;
4044 sim->path_id = new_bus->path_id =
4045 xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
4046 old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4047 while (old_bus != NULL
4048 && old_bus->path_id < new_bus->path_id)
4049 old_bus = TAILQ_NEXT(old_bus, links);
4050 if (old_bus != NULL)
4051 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
4053 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
4054 xsoftc.bus_generation++;
4058 * Set a default transport so that a PATH_INQ can be issued to
4059 * the SIM. This will then allow for probing and attaching of
4060 * a more appropriate transport.
4062 new_bus->xport = &xport_default;
4064 status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
4065 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
4066 if (status != CAM_REQ_CMP) {
4067 xpt_release_bus(new_bus);
4068 return (CAM_RESRC_UNAVAIL);
4071 xpt_path_inq(&cpi, path);
4073 if (cpi.ccb_h.status == CAM_REQ_CMP) {
4074 struct xpt_xport **xpt;
4076 SET_FOREACH(xpt, cam_xpt_xport_set) {
4077 if ((*xpt)->xport == cpi.transport) {
4078 new_bus->xport = *xpt;
4082 if (new_bus->xport == NULL) {
4084 "No transport found for %d\n", cpi.transport);
4085 xpt_release_bus(new_bus);
4086 free(path, M_CAMXPT);
4087 return (CAM_RESRC_UNAVAIL);
4091 /* Notify interested parties */
4092 if (sim->path_id != CAM_XPT_PATH_ID) {
4094 xpt_async(AC_PATH_REGISTERED, path, &cpi);
4095 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
4096 union ccb *scan_ccb;
4098 /* Initiate bus rescan. */
4099 scan_ccb = xpt_alloc_ccb_nowait();
4100 if (scan_ccb != NULL) {
4101 scan_ccb->ccb_h.path = path;
4102 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
4103 scan_ccb->crcn.flags = 0;
4104 xpt_rescan(scan_ccb);
4107 "Can't allocate CCB to scan bus\n");
4108 xpt_free_path(path);
4111 xpt_free_path(path);
4113 xpt_free_path(path);
4114 return (CAM_SUCCESS);
4118 xpt_bus_deregister(path_id_t pathid)
4120 struct cam_path bus_path;
4123 status = xpt_compile_path(&bus_path, NULL, pathid,
4124 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
4125 if (status != CAM_REQ_CMP)
4128 xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
4129 xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
4131 /* Release the reference count held while registered. */
4132 xpt_release_bus(bus_path.bus);
4133 xpt_release_path(&bus_path);
4135 return (CAM_REQ_CMP);
4139 xptnextfreepathid(void)
4145 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4147 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4149 /* Find an unoccupied pathid */
4150 while (bus != NULL && bus->path_id <= pathid) {
4151 if (bus->path_id == pathid)
4153 bus = TAILQ_NEXT(bus, links);
4157 * Ensure that this pathid is not reserved for
4158 * a bus that may be registered in the future.
4160 if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
4162 /* Start the search over */
4169 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
4176 pathid = CAM_XPT_PATH_ID;
4177 snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
4178 if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
4181 while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
4182 if (strcmp(dname, "scbus")) {
4183 /* Avoid a bit of foot shooting. */
4186 if (dunit < 0) /* unwired?! */
4188 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
4189 if (sim_bus == val) {
4193 } else if (sim_bus == 0) {
4194 /* Unspecified matches bus 0 */
4198 printf("Ambiguous scbus configuration for %s%d "
4199 "bus %d, cannot wire down. The kernel "
4200 "config entry for scbus%d should "
4201 "specify a controller bus.\n"
4202 "Scbus will be assigned dynamically.\n",
4203 sim_name, sim_unit, sim_bus, dunit);
4208 if (pathid == CAM_XPT_PATH_ID)
4209 pathid = xptnextfreepathid();
4214 xpt_async_string(u_int32_t async_code)
4217 switch (async_code) {
4218 case AC_BUS_RESET: return ("AC_BUS_RESET");
4219 case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4220 case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4221 case AC_SENT_BDR: return ("AC_SENT_BDR");
4222 case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4223 case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4224 case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4225 case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4226 case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4227 case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4228 case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4229 case AC_CONTRACT: return ("AC_CONTRACT");
4230 case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4231 case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4233 return ("AC_UNKNOWN");
4237 xpt_async_size(u_int32_t async_code)
4240 switch (async_code) {
4241 case AC_BUS_RESET: return (0);
4242 case AC_UNSOL_RESEL: return (0);
4243 case AC_SCSI_AEN: return (0);
4244 case AC_SENT_BDR: return (0);
4245 case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4246 case AC_PATH_DEREGISTERED: return (0);
4247 case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4248 case AC_LOST_DEVICE: return (0);
4249 case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4250 case AC_INQ_CHANGED: return (0);
4251 case AC_GETDEV_CHANGED: return (0);
4252 case AC_CONTRACT: return (sizeof(struct ac_contract));
4253 case AC_ADVINFO_CHANGED: return (-1);
4254 case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4260 xpt_async_process_dev(struct cam_ed *device, void *arg)
4262 union ccb *ccb = arg;
4263 struct cam_path *path = ccb->ccb_h.path;
4264 void *async_arg = ccb->casync.async_arg_ptr;
4265 u_int32_t async_code = ccb->casync.async_code;
4268 if (path->device != device
4269 && path->device->lun_id != CAM_LUN_WILDCARD
4270 && device->lun_id != CAM_LUN_WILDCARD)
4274 * The async callback could free the device.
4275 * If it is a broadcast async, it doesn't hold
4276 * device reference, so take our own reference.
4278 xpt_acquire_device(device);
4281 * If async for specific device is to be delivered to
4282 * the wildcard client, take the specific device lock.
4283 * XXX: We may need a way for client to specify it.
4285 if ((device->lun_id == CAM_LUN_WILDCARD &&
4286 path->device->lun_id != CAM_LUN_WILDCARD) ||
4287 (device->target->target_id == CAM_TARGET_WILDCARD &&
4288 path->target->target_id != CAM_TARGET_WILDCARD) ||
4289 (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4290 path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4291 mtx_unlock(&device->device_mtx);
4292 xpt_path_lock(path);
4297 (*(device->target->bus->xport->ops->async))(async_code,
4298 device->target->bus, device->target, device, async_arg);
4299 xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4302 xpt_path_unlock(path);
4303 mtx_lock(&device->device_mtx);
4305 xpt_release_device(device);
4310 xpt_async_process_tgt(struct cam_et *target, void *arg)
4312 union ccb *ccb = arg;
4313 struct cam_path *path = ccb->ccb_h.path;
4315 if (path->target != target
4316 && path->target->target_id != CAM_TARGET_WILDCARD
4317 && target->target_id != CAM_TARGET_WILDCARD)
4320 if (ccb->casync.async_code == AC_SENT_BDR) {
4321 /* Update our notion of when the last reset occurred */
4322 microtime(&target->last_reset);
4325 return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4329 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4332 struct cam_path *path;
4334 u_int32_t async_code;
4336 path = ccb->ccb_h.path;
4337 async_code = ccb->casync.async_code;
4338 async_arg = ccb->casync.async_arg_ptr;
4339 CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4340 ("xpt_async(%s)\n", xpt_async_string(async_code)));
4343 if (async_code == AC_BUS_RESET) {
4344 /* Update our notion of when the last reset occurred */
4345 microtime(&bus->last_reset);
4348 xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4351 * If this wasn't a fully wildcarded async, tell all
4352 * clients that want all async events.
4354 if (bus != xpt_periph->path->bus) {
4355 xpt_path_lock(xpt_periph->path);
4356 xpt_async_process_dev(xpt_periph->path->device, ccb);
4357 xpt_path_unlock(xpt_periph->path);
4360 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4361 xpt_release_devq(path, 1, TRUE);
4363 xpt_release_simq(path->bus->sim, TRUE);
4364 if (ccb->casync.async_arg_size > 0)
4365 free(async_arg, M_CAMXPT);
4366 xpt_free_path(path);
4371 xpt_async_bcast(struct async_list *async_head,
4372 u_int32_t async_code,
4373 struct cam_path *path, void *async_arg)
4375 struct async_node *cur_entry;
4378 cur_entry = SLIST_FIRST(async_head);
4379 while (cur_entry != NULL) {
4380 struct async_node *next_entry;
4382 * Grab the next list entry before we call the current
4383 * entry's callback. This is because the callback function
4384 * can delete its async callback entry.
4386 next_entry = SLIST_NEXT(cur_entry, links);
4387 if ((cur_entry->event_enable & async_code) != 0) {
4388 mtx = cur_entry->event_lock ?
4389 path->device->sim->mtx : NULL;
4392 cur_entry->callback(cur_entry->callback_arg,
4398 cur_entry = next_entry;
4403 xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
4408 ccb = xpt_alloc_ccb_nowait();
4410 xpt_print(path, "Can't allocate CCB to send %s\n",
4411 xpt_async_string(async_code));
4415 if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
4416 xpt_print(path, "Can't allocate path to send %s\n",
4417 xpt_async_string(async_code));
4421 ccb->ccb_h.path->periph = NULL;
4422 ccb->ccb_h.func_code = XPT_ASYNC;
4423 ccb->ccb_h.cbfcnp = xpt_async_process;
4424 ccb->ccb_h.flags |= CAM_UNLOCKED;
4425 ccb->casync.async_code = async_code;
4426 ccb->casync.async_arg_size = 0;
4427 size = xpt_async_size(async_code);
4428 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
4429 ("xpt_async: func %#x %s aync_code %d %s\n",
4430 ccb->ccb_h.func_code,
4431 xpt_action_name(ccb->ccb_h.func_code),
4433 xpt_async_string(async_code)));
4434 if (size > 0 && async_arg != NULL) {
4435 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4436 if (ccb->casync.async_arg_ptr == NULL) {
4437 xpt_print(path, "Can't allocate argument to send %s\n",
4438 xpt_async_string(async_code));
4439 xpt_free_path(ccb->ccb_h.path);
4443 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4444 ccb->casync.async_arg_size = size;
4445 } else if (size < 0) {
4446 ccb->casync.async_arg_ptr = async_arg;
4447 ccb->casync.async_arg_size = size;
4449 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4450 xpt_freeze_devq(path, 1);
4452 xpt_freeze_simq(path->bus->sim, 1);
4457 xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
4458 struct cam_et *target, struct cam_ed *device,
4463 * We only need to handle events for real devices.
4465 if (target->target_id == CAM_TARGET_WILDCARD
4466 || device->lun_id == CAM_LUN_WILDCARD)
4469 printf("%s called\n", __func__);
4473 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4475 struct cam_devq *devq;
4478 devq = dev->sim->devq;
4479 mtx_assert(&devq->send_mtx, MA_OWNED);
4480 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4481 ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4482 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4483 freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4484 /* Remove frozen device from sendq. */
4485 if (device_is_queued(dev))
4486 camq_remove(&devq->send_queue, dev->devq_entry.index);
4491 xpt_freeze_devq(struct cam_path *path, u_int count)
4493 struct cam_ed *dev = path->device;
4494 struct cam_devq *devq;
4497 devq = dev->sim->devq;
4498 mtx_lock(&devq->send_mtx);
4499 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4500 freeze = xpt_freeze_devq_device(dev, count);
4501 mtx_unlock(&devq->send_mtx);
4506 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4508 struct cam_devq *devq;
4512 mtx_lock(&devq->send_mtx);
4513 freeze = (devq->send_queue.qfrozen_cnt += count);
4514 mtx_unlock(&devq->send_mtx);
4519 xpt_release_devq_timeout(void *arg)
4522 struct cam_devq *devq;
4524 dev = (struct cam_ed *)arg;
4525 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4526 devq = dev->sim->devq;
4527 mtx_assert(&devq->send_mtx, MA_OWNED);
4528 if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4533 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4536 struct cam_devq *devq;
4538 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4541 devq = dev->sim->devq;
4542 mtx_lock(&devq->send_mtx);
4543 if (xpt_release_devq_device(dev, count, run_queue))
4544 xpt_run_devq(dev->sim->devq);
4545 mtx_unlock(&devq->send_mtx);
4549 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4552 mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4553 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4554 ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4555 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4556 if (count > dev->ccbq.queue.qfrozen_cnt) {
4558 printf("xpt_release_devq(): requested %u > present %u\n",
4559 count, dev->ccbq.queue.qfrozen_cnt);
4561 count = dev->ccbq.queue.qfrozen_cnt;
4563 dev->ccbq.queue.qfrozen_cnt -= count;
4564 if (dev->ccbq.queue.qfrozen_cnt == 0) {
4566 * No longer need to wait for a successful
4567 * command completion.
4569 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4571 * Remove any timeouts that might be scheduled
4572 * to release this queue.
4574 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4575 callout_stop(&dev->callout);
4576 dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4579 * Now that we are unfrozen schedule the
4580 * device so any pending transactions are
4583 xpt_schedule_devq(dev->sim->devq, dev);
4590 xpt_release_simq(struct cam_sim *sim, int run_queue)
4592 struct cam_devq *devq;
4595 mtx_lock(&devq->send_mtx);
4596 if (devq->send_queue.qfrozen_cnt <= 0) {
4598 printf("xpt_release_simq: requested 1 > present %u\n",
4599 devq->send_queue.qfrozen_cnt);
4602 devq->send_queue.qfrozen_cnt--;
4603 if (devq->send_queue.qfrozen_cnt == 0) {
4605 * If there is a timeout scheduled to release this
4606 * sim queue, remove it. The queue frozen count is
4609 if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
4610 callout_stop(&sim->callout);
4611 sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
4615 * Now that we are unfrozen run the send queue.
4617 xpt_run_devq(sim->devq);
4620 mtx_unlock(&devq->send_mtx);
4624 xpt_done(union ccb *done_ccb)
4626 struct cam_doneq *queue;
4629 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
4630 if (done_ccb->ccb_h.func_code == XPT_SCSI_IO &&
4631 done_ccb->csio.bio != NULL)
4632 biotrack(done_ccb->csio.bio, __func__);
4635 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
4636 ("xpt_done: func= %#x %s status %#x\n",
4637 done_ccb->ccb_h.func_code,
4638 xpt_action_name(done_ccb->ccb_h.func_code),
4639 done_ccb->ccb_h.status));
4640 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4643 /* Store the time the ccb was in the sim */
4644 done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
4645 hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4646 done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4647 queue = &cam_doneqs[hash];
4648 mtx_lock(&queue->cam_doneq_mtx);
4649 run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4650 STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4651 done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4652 mtx_unlock(&queue->cam_doneq_mtx);
4654 wakeup(&queue->cam_doneq);
4658 xpt_done_direct(union ccb *done_ccb)
4661 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
4662 ("xpt_done_direct: status %#x\n", done_ccb->ccb_h.status));
4663 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4666 /* Store the time the ccb was in the sim */
4667 done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
4668 xpt_done_process(&done_ccb->ccb_h);
4676 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4681 xpt_alloc_ccb_nowait()
4685 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4690 xpt_free_ccb(union ccb *free_ccb)
4692 free(free_ccb, M_CAMCCB);
4697 /* Private XPT functions */
4700 * Get a CAM control block for the caller. Charge the structure to the device
4701 * referenced by the path. If we don't have sufficient resources to allocate
4702 * more ccbs, we return NULL.
4705 xpt_get_ccb_nowait(struct cam_periph *periph)
4709 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4710 if (new_ccb == NULL)
4712 periph->periph_allocated++;
4713 cam_ccbq_take_opening(&periph->path->device->ccbq);
4718 xpt_get_ccb(struct cam_periph *periph)
4722 cam_periph_unlock(periph);
4723 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4724 cam_periph_lock(periph);
4725 periph->periph_allocated++;
4726 cam_ccbq_take_opening(&periph->path->device->ccbq);
4731 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
4733 struct ccb_hdr *ccb_h;
4735 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4736 cam_periph_assert(periph, MA_OWNED);
4737 while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4738 ccb_h->pinfo.priority != priority) {
4739 if (priority < periph->immediate_priority) {
4740 periph->immediate_priority = priority;
4741 xpt_run_allocq(periph, 0);
4743 cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4746 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4747 return ((union ccb *)ccb_h);
4751 xpt_acquire_bus(struct cam_eb *bus)
4760 xpt_release_bus(struct cam_eb *bus)
4764 KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4765 if (--bus->refcount > 0) {
4769 TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4770 xsoftc.bus_generation++;
4772 KASSERT(TAILQ_EMPTY(&bus->et_entries),
4773 ("destroying bus, but target list is not empty"));
4774 cam_sim_release(bus->sim);
4775 mtx_destroy(&bus->eb_mtx);
4776 free(bus, M_CAMXPT);
4779 static struct cam_et *
4780 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4782 struct cam_et *cur_target, *target;
4784 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4785 mtx_assert(&bus->eb_mtx, MA_OWNED);
4786 target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4791 TAILQ_INIT(&target->ed_entries);
4793 target->target_id = target_id;
4794 target->refcount = 1;
4795 target->generation = 0;
4796 target->luns = NULL;
4797 mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4798 timevalclear(&target->last_reset);
4800 * Hold a reference to our parent bus so it
4801 * will not go away before we do.
4805 /* Insertion sort into our bus's target list */
4806 cur_target = TAILQ_FIRST(&bus->et_entries);
4807 while (cur_target != NULL && cur_target->target_id < target_id)
4808 cur_target = TAILQ_NEXT(cur_target, links);
4809 if (cur_target != NULL) {
4810 TAILQ_INSERT_BEFORE(cur_target, target, links);
4812 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4819 xpt_acquire_target(struct cam_et *target)
4821 struct cam_eb *bus = target->bus;
4823 mtx_lock(&bus->eb_mtx);
4825 mtx_unlock(&bus->eb_mtx);
4829 xpt_release_target(struct cam_et *target)
4831 struct cam_eb *bus = target->bus;
4833 mtx_lock(&bus->eb_mtx);
4834 if (--target->refcount > 0) {
4835 mtx_unlock(&bus->eb_mtx);
4838 TAILQ_REMOVE(&bus->et_entries, target, links);
4840 mtx_unlock(&bus->eb_mtx);
4841 KASSERT(TAILQ_EMPTY(&target->ed_entries),
4842 ("destroying target, but device list is not empty"));
4843 xpt_release_bus(bus);
4844 mtx_destroy(&target->luns_mtx);
4846 free(target->luns, M_CAMXPT);
4847 free(target, M_CAMXPT);
4850 static struct cam_ed *
4851 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4854 struct cam_ed *device;
4856 device = xpt_alloc_device(bus, target, lun_id);
4860 device->mintags = 1;
4861 device->maxtags = 1;
4866 xpt_destroy_device(void *context, int pending)
4868 struct cam_ed *device = context;
4870 mtx_lock(&device->device_mtx);
4871 mtx_destroy(&device->device_mtx);
4872 free(device, M_CAMDEV);
4876 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4878 struct cam_ed *cur_device, *device;
4879 struct cam_devq *devq;
4882 mtx_assert(&bus->eb_mtx, MA_OWNED);
4883 /* Make space for us in the device queue on our bus */
4884 devq = bus->sim->devq;
4885 mtx_lock(&devq->send_mtx);
4886 status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4887 mtx_unlock(&devq->send_mtx);
4888 if (status != CAM_REQ_CMP)
4891 device = (struct cam_ed *)malloc(sizeof(*device),
4892 M_CAMDEV, M_NOWAIT|M_ZERO);
4896 cam_init_pinfo(&device->devq_entry);
4897 device->target = target;
4898 device->lun_id = lun_id;
4899 device->sim = bus->sim;
4900 if (cam_ccbq_init(&device->ccbq,
4901 bus->sim->max_dev_openings) != 0) {
4902 free(device, M_CAMDEV);
4905 SLIST_INIT(&device->asyncs);
4906 SLIST_INIT(&device->periphs);
4907 device->generation = 0;
4908 device->flags = CAM_DEV_UNCONFIGURED;
4909 device->tag_delay_count = 0;
4910 device->tag_saved_openings = 0;
4911 device->refcount = 1;
4912 mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4913 callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4914 TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4916 * Hold a reference to our parent bus so it
4917 * will not go away before we do.
4921 cur_device = TAILQ_FIRST(&target->ed_entries);
4922 while (cur_device != NULL && cur_device->lun_id < lun_id)
4923 cur_device = TAILQ_NEXT(cur_device, links);
4924 if (cur_device != NULL)
4925 TAILQ_INSERT_BEFORE(cur_device, device, links);
4927 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4928 target->generation++;
4933 xpt_acquire_device(struct cam_ed *device)
4935 struct cam_eb *bus = device->target->bus;
4937 mtx_lock(&bus->eb_mtx);
4939 mtx_unlock(&bus->eb_mtx);
4943 xpt_release_device(struct cam_ed *device)
4945 struct cam_eb *bus = device->target->bus;
4946 struct cam_devq *devq;
4948 mtx_lock(&bus->eb_mtx);
4949 if (--device->refcount > 0) {
4950 mtx_unlock(&bus->eb_mtx);
4954 TAILQ_REMOVE(&device->target->ed_entries, device,links);
4955 device->target->generation++;
4956 mtx_unlock(&bus->eb_mtx);
4958 /* Release our slot in the devq */
4959 devq = bus->sim->devq;
4960 mtx_lock(&devq->send_mtx);
4961 cam_devq_resize(devq, devq->send_queue.array_size - 1);
4962 mtx_unlock(&devq->send_mtx);
4964 KASSERT(SLIST_EMPTY(&device->periphs),
4965 ("destroying device, but periphs list is not empty"));
4966 KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4967 ("destroying device while still queued for ccbs"));
4969 if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4970 callout_stop(&device->callout);
4972 xpt_release_target(device->target);
4974 cam_ccbq_fini(&device->ccbq);
4976 * Free allocated memory. free(9) does nothing if the
4977 * supplied pointer is NULL, so it is safe to call without
4980 free(device->supported_vpds, M_CAMXPT);
4981 free(device->device_id, M_CAMXPT);
4982 free(device->ext_inq, M_CAMXPT);
4983 free(device->physpath, M_CAMXPT);
4984 free(device->rcap_buf, M_CAMXPT);
4985 free(device->serial_num, M_CAMXPT);
4986 free(device->nvme_data, M_CAMXPT);
4987 free(device->nvme_cdata, M_CAMXPT);
4988 taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
4992 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
4998 mtx_lock(&dev->sim->devq->send_mtx);
4999 result = cam_ccbq_resize(&dev->ccbq, newopenings);
5000 mtx_unlock(&dev->sim->devq->send_mtx);
5001 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5002 || (dev->inq_flags & SID_CmdQue) != 0)
5003 dev->tag_saved_openings = newopenings;
5007 static struct cam_eb *
5008 xpt_find_bus(path_id_t path_id)
5013 for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
5015 bus = TAILQ_NEXT(bus, links)) {
5016 if (bus->path_id == path_id) {
5025 static struct cam_et *
5026 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
5028 struct cam_et *target;
5030 mtx_assert(&bus->eb_mtx, MA_OWNED);
5031 for (target = TAILQ_FIRST(&bus->et_entries);
5033 target = TAILQ_NEXT(target, links)) {
5034 if (target->target_id == target_id) {
5042 static struct cam_ed *
5043 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
5045 struct cam_ed *device;
5047 mtx_assert(&target->bus->eb_mtx, MA_OWNED);
5048 for (device = TAILQ_FIRST(&target->ed_entries);
5050 device = TAILQ_NEXT(device, links)) {
5051 if (device->lun_id == lun_id) {
5060 xpt_start_tags(struct cam_path *path)
5062 struct ccb_relsim crs;
5063 struct cam_ed *device;
5064 struct cam_sim *sim;
5067 device = path->device;
5068 sim = path->bus->sim;
5069 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
5070 xpt_freeze_devq(path, /*count*/1);
5071 device->inq_flags |= SID_CmdQue;
5072 if (device->tag_saved_openings != 0)
5073 newopenings = device->tag_saved_openings;
5075 newopenings = min(device->maxtags,
5076 sim->max_tagged_dev_openings);
5077 xpt_dev_ccbq_resize(path, newopenings);
5078 xpt_async(AC_GETDEV_CHANGED, path, NULL);
5079 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
5080 crs.ccb_h.func_code = XPT_REL_SIMQ;
5081 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
5083 = crs.release_timeout
5086 xpt_action((union ccb *)&crs);
5090 xpt_stop_tags(struct cam_path *path)
5092 struct ccb_relsim crs;
5093 struct cam_ed *device;
5094 struct cam_sim *sim;
5096 device = path->device;
5097 sim = path->bus->sim;
5098 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
5099 device->tag_delay_count = 0;
5100 xpt_freeze_devq(path, /*count*/1);
5101 device->inq_flags &= ~SID_CmdQue;
5102 xpt_dev_ccbq_resize(path, sim->max_dev_openings);
5103 xpt_async(AC_GETDEV_CHANGED, path, NULL);
5104 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
5105 crs.ccb_h.func_code = XPT_REL_SIMQ;
5106 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
5108 = crs.release_timeout
5111 xpt_action((union ccb *)&crs);
5115 * Assume all possible buses are detected by this time, so allow boot
5116 * as soon as they all are scanned.
5119 xpt_boot_delay(void *arg)
5126 * Now that all config hooks have completed, start boot_delay timer,
5127 * waiting for possibly still undetected buses (USB) to appear.
5130 xpt_ch_done(void *arg)
5133 callout_init(&xsoftc.boot_callout, 1);
5134 callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0,
5135 xpt_boot_delay, NULL, 0);
5137 SYSINIT(xpt_hw_delay, SI_SUB_INT_CONFIG_HOOKS, SI_ORDER_ANY, xpt_ch_done, NULL);
5140 * Now that interrupts are enabled, go find our devices
5143 xpt_config(void *arg)
5145 if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
5146 printf("xpt_config: failed to create taskqueue thread.\n");
5148 /* Setup debugging path */
5149 if (cam_dflags != CAM_DEBUG_NONE) {
5150 if (xpt_create_path(&cam_dpath, NULL,
5151 CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
5152 CAM_DEBUG_LUN) != CAM_REQ_CMP) {
5153 printf("xpt_config: xpt_create_path() failed for debug"
5154 " target %d:%d:%d, debugging disabled\n",
5155 CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
5156 cam_dflags = CAM_DEBUG_NONE;
5161 periphdriver_init(1);
5164 /* Fire up rescan thread. */
5165 if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
5166 "cam", "scanner")) {
5167 printf("xpt_config: failed to create rescan thread.\n");
5172 xpt_hold_boot_locked(void)
5175 if (xsoftc.buses_to_config++ == 0)
5176 root_mount_hold_token("CAM", &xsoftc.xpt_rootmount);
5184 xpt_hold_boot_locked();
5189 xpt_release_boot(void)
5193 if (--xsoftc.buses_to_config == 0) {
5194 if (xsoftc.buses_config_done == 0) {
5195 xsoftc.buses_config_done = 1;
5196 xsoftc.buses_to_config++;
5197 TASK_INIT(&xsoftc.boot_task, 0, xpt_finishconfig_task,
5199 taskqueue_enqueue(taskqueue_thread, &xsoftc.boot_task);
5201 root_mount_rel(&xsoftc.xpt_rootmount);
5207 * If the given device only has one peripheral attached to it, and if that
5208 * peripheral is the passthrough driver, announce it. This insures that the
5209 * user sees some sort of announcement for every peripheral in their system.
5212 xptpassannouncefunc(struct cam_ed *device, void *arg)
5214 struct cam_periph *periph;
5217 for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
5218 periph = SLIST_NEXT(periph, periph_links), i++);
5220 periph = SLIST_FIRST(&device->periphs);
5222 && (strncmp(periph->periph_name, "pass", 4) == 0))
5223 xpt_announce_periph(periph, NULL);
5229 xpt_finishconfig_task(void *context, int pending)
5232 periphdriver_init(2);
5234 * Check for devices with no "standard" peripheral driver
5235 * attached. For any devices like that, announce the
5236 * passthrough driver so the user will see something.
5239 xpt_for_all_devices(xptpassannouncefunc, NULL);
5245 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5246 struct cam_path *path)
5248 struct ccb_setasync csa;
5253 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5254 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5255 if (status != CAM_REQ_CMP)
5257 xpt_path_lock(path);
5261 xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5262 csa.ccb_h.func_code = XPT_SASYNC_CB;
5263 csa.event_enable = event;
5264 csa.callback = cbfunc;
5265 csa.callback_arg = cbarg;
5266 xpt_action((union ccb *)&csa);
5267 status = csa.ccb_h.status;
5269 CAM_DEBUG(csa.ccb_h.path, CAM_DEBUG_TRACE,
5270 ("xpt_register_async: func %p\n", cbfunc));
5273 xpt_path_unlock(path);
5274 xpt_free_path(path);
5277 if ((status == CAM_REQ_CMP) &&
5278 (csa.event_enable & AC_FOUND_DEVICE)) {
5280 * Get this peripheral up to date with all
5281 * the currently existing devices.
5283 xpt_for_all_devices(xptsetasyncfunc, &csa);
5285 if ((status == CAM_REQ_CMP) &&
5286 (csa.event_enable & AC_PATH_REGISTERED)) {
5288 * Get this peripheral up to date with all
5289 * the currently existing buses.
5291 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5298 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5300 CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5302 switch (work_ccb->ccb_h.func_code) {
5303 /* Common cases first */
5304 case XPT_PATH_INQ: /* Path routing inquiry */
5306 struct ccb_pathinq *cpi;
5308 cpi = &work_ccb->cpi;
5309 cpi->version_num = 1; /* XXX??? */
5310 cpi->hba_inquiry = 0;
5311 cpi->target_sprt = 0;
5313 cpi->hba_eng_cnt = 0;
5314 cpi->max_target = 0;
5316 cpi->initiator_id = 0;
5317 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5318 strlcpy(cpi->hba_vid, "", HBA_IDLEN);
5319 strlcpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5320 cpi->unit_number = sim->unit_number;
5321 cpi->bus_id = sim->bus_id;
5322 cpi->base_transfer_speed = 0;
5323 cpi->protocol = PROTO_UNSPECIFIED;
5324 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5325 cpi->transport = XPORT_UNSPECIFIED;
5326 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5327 cpi->ccb_h.status = CAM_REQ_CMP;
5332 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5339 * The xpt as a "controller" has no interrupt sources, so polling
5343 xptpoll(struct cam_sim *sim)
5348 xpt_lock_buses(void)
5350 mtx_lock(&xsoftc.xpt_topo_lock);
5354 xpt_unlock_buses(void)
5356 mtx_unlock(&xsoftc.xpt_topo_lock);
5360 xpt_path_mtx(struct cam_path *path)
5363 return (&path->device->device_mtx);
5367 xpt_done_process(struct ccb_hdr *ccb_h)
5369 struct cam_sim *sim = NULL;
5370 struct cam_devq *devq = NULL;
5371 struct mtx *mtx = NULL;
5373 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
5374 struct ccb_scsiio *csio;
5376 if (ccb_h->func_code == XPT_SCSI_IO) {
5377 csio = &((union ccb *)ccb_h)->csio;
5378 if (csio->bio != NULL)
5379 biotrack(csio->bio, __func__);
5383 if (ccb_h->flags & CAM_HIGH_POWER) {
5384 struct highpowerlist *hphead;
5385 struct cam_ed *device;
5387 mtx_lock(&xsoftc.xpt_highpower_lock);
5388 hphead = &xsoftc.highpowerq;
5390 device = STAILQ_FIRST(hphead);
5393 * Increment the count since this command is done.
5395 xsoftc.num_highpower++;
5398 * Any high powered commands queued up?
5400 if (device != NULL) {
5402 STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5403 mtx_unlock(&xsoftc.xpt_highpower_lock);
5405 mtx_lock(&device->sim->devq->send_mtx);
5406 xpt_release_devq_device(device,
5407 /*count*/1, /*runqueue*/TRUE);
5408 mtx_unlock(&device->sim->devq->send_mtx);
5410 mtx_unlock(&xsoftc.xpt_highpower_lock);
5414 * Insulate against a race where the periph is destroyed but CCBs are
5415 * still not all processed. This shouldn't happen, but allows us better
5416 * bug diagnostic when it does.
5418 if (ccb_h->path->bus)
5419 sim = ccb_h->path->bus->sim;
5421 if (ccb_h->status & CAM_RELEASE_SIMQ) {
5422 KASSERT(sim, ("sim missing for CAM_RELEASE_SIMQ request"));
5423 xpt_release_simq(sim, /*run_queue*/FALSE);
5424 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5427 if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5428 && (ccb_h->status & CAM_DEV_QFRZN)) {
5429 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5430 ccb_h->status &= ~CAM_DEV_QFRZN;
5433 if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5434 struct cam_ed *dev = ccb_h->path->device;
5438 KASSERT(devq, ("Periph disappeared with request pending."));
5440 mtx_lock(&devq->send_mtx);
5441 devq->send_active--;
5442 devq->send_openings++;
5443 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5445 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5446 && (dev->ccbq.dev_active == 0))) {
5447 dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5448 xpt_release_devq_device(dev, /*count*/1,
5449 /*run_queue*/FALSE);
5452 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5453 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5454 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5455 xpt_release_devq_device(dev, /*count*/1,
5456 /*run_queue*/FALSE);
5459 if (!device_is_queued(dev))
5460 (void)xpt_schedule_devq(devq, dev);
5462 mtx_unlock(&devq->send_mtx);
5464 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5465 mtx = xpt_path_mtx(ccb_h->path);
5468 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5469 && (--dev->tag_delay_count == 0))
5470 xpt_start_tags(ccb_h->path);
5474 if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5476 mtx = xpt_path_mtx(ccb_h->path);
5486 /* Call the peripheral driver's callback */
5487 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5488 (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5494 xpt_done_td(void *arg)
5496 struct cam_doneq *queue = arg;
5497 struct ccb_hdr *ccb_h;
5498 STAILQ_HEAD(, ccb_hdr) doneq;
5500 STAILQ_INIT(&doneq);
5501 mtx_lock(&queue->cam_doneq_mtx);
5503 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5504 queue->cam_doneq_sleep = 1;
5505 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5507 queue->cam_doneq_sleep = 0;
5509 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5510 mtx_unlock(&queue->cam_doneq_mtx);
5512 THREAD_NO_SLEEPING();
5513 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5514 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5515 xpt_done_process(ccb_h);
5517 THREAD_SLEEPING_OK();
5519 mtx_lock(&queue->cam_doneq_mtx);
5524 camisr_runqueue(void)
5526 struct ccb_hdr *ccb_h;
5527 struct cam_doneq *queue;
5530 /* Process global queues. */
5531 for (i = 0; i < cam_num_doneqs; i++) {
5532 queue = &cam_doneqs[i];
5533 mtx_lock(&queue->cam_doneq_mtx);
5534 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5535 STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5536 mtx_unlock(&queue->cam_doneq_mtx);
5537 xpt_done_process(ccb_h);
5538 mtx_lock(&queue->cam_doneq_mtx);
5540 mtx_unlock(&queue->cam_doneq_mtx);
5550 static struct kv map[] = {
5551 { XPT_NOOP, "XPT_NOOP" },
5552 { XPT_SCSI_IO, "XPT_SCSI_IO" },
5553 { XPT_GDEV_TYPE, "XPT_GDEV_TYPE" },
5554 { XPT_GDEVLIST, "XPT_GDEVLIST" },
5555 { XPT_PATH_INQ, "XPT_PATH_INQ" },
5556 { XPT_REL_SIMQ, "XPT_REL_SIMQ" },
5557 { XPT_SASYNC_CB, "XPT_SASYNC_CB" },
5558 { XPT_SDEV_TYPE, "XPT_SDEV_TYPE" },
5559 { XPT_SCAN_BUS, "XPT_SCAN_BUS" },
5560 { XPT_DEV_MATCH, "XPT_DEV_MATCH" },
5561 { XPT_DEBUG, "XPT_DEBUG" },
5562 { XPT_PATH_STATS, "XPT_PATH_STATS" },
5563 { XPT_GDEV_STATS, "XPT_GDEV_STATS" },
5564 { XPT_DEV_ADVINFO, "XPT_DEV_ADVINFO" },
5565 { XPT_ASYNC, "XPT_ASYNC" },
5566 { XPT_ABORT, "XPT_ABORT" },
5567 { XPT_RESET_BUS, "XPT_RESET_BUS" },
5568 { XPT_RESET_DEV, "XPT_RESET_DEV" },
5569 { XPT_TERM_IO, "XPT_TERM_IO" },
5570 { XPT_SCAN_LUN, "XPT_SCAN_LUN" },
5571 { XPT_GET_TRAN_SETTINGS, "XPT_GET_TRAN_SETTINGS" },
5572 { XPT_SET_TRAN_SETTINGS, "XPT_SET_TRAN_SETTINGS" },
5573 { XPT_CALC_GEOMETRY, "XPT_CALC_GEOMETRY" },
5574 { XPT_ATA_IO, "XPT_ATA_IO" },
5575 { XPT_GET_SIM_KNOB, "XPT_GET_SIM_KNOB" },
5576 { XPT_SET_SIM_KNOB, "XPT_SET_SIM_KNOB" },
5577 { XPT_NVME_IO, "XPT_NVME_IO" },
5578 { XPT_MMC_IO, "XPT_MMC_IO" },
5579 { XPT_SMP_IO, "XPT_SMP_IO" },
5580 { XPT_SCAN_TGT, "XPT_SCAN_TGT" },
5581 { XPT_NVME_ADMIN, "XPT_NVME_ADMIN" },
5582 { XPT_ENG_INQ, "XPT_ENG_INQ" },
5583 { XPT_ENG_EXEC, "XPT_ENG_EXEC" },
5584 { XPT_EN_LUN, "XPT_EN_LUN" },
5585 { XPT_TARGET_IO, "XPT_TARGET_IO" },
5586 { XPT_ACCEPT_TARGET_IO, "XPT_ACCEPT_TARGET_IO" },
5587 { XPT_CONT_TARGET_IO, "XPT_CONT_TARGET_IO" },
5588 { XPT_IMMED_NOTIFY, "XPT_IMMED_NOTIFY" },
5589 { XPT_NOTIFY_ACK, "XPT_NOTIFY_ACK" },
5590 { XPT_IMMEDIATE_NOTIFY, "XPT_IMMEDIATE_NOTIFY" },
5591 { XPT_NOTIFY_ACKNOWLEDGE, "XPT_NOTIFY_ACKNOWLEDGE" },
5596 xpt_action_name(uint32_t action)
5598 static char buffer[32]; /* Only for unknown messages -- racy */
5599 struct kv *walker = map;
5601 while (walker->name != NULL) {
5602 if (walker->v == action)
5603 return (walker->name);
5607 snprintf(buffer, sizeof(buffer), "%#x", action);