2 * Implementation of the Common Access Method Transport (XPT) layer.
4 * SPDX-License-Identifier: BSD-2-Clause
6 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
7 * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification, immediately at the beginning of the file.
16 * 2. The name of the author may not be used to endorse or promote products
17 * derived from this software without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #include "opt_printf.h"
34 #include <sys/cdefs.h>
35 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/types.h>
40 #include <sys/malloc.h>
41 #include <sys/kernel.h>
44 #include <sys/fcntl.h>
48 #include <sys/taskqueue.h>
51 #include <sys/mutex.h>
52 #include <sys/sysctl.h>
53 #include <sys/kthread.h>
56 #include <cam/cam_ccb.h>
57 #include <cam/cam_iosched.h>
58 #include <cam/cam_periph.h>
59 #include <cam/cam_queue.h>
60 #include <cam/cam_sim.h>
61 #include <cam/cam_xpt.h>
62 #include <cam/cam_xpt_sim.h>
63 #include <cam/cam_xpt_periph.h>
64 #include <cam/cam_xpt_internal.h>
65 #include <cam/cam_debug.h>
66 #include <cam/cam_compat.h>
68 #include <cam/scsi/scsi_all.h>
69 #include <cam/scsi/scsi_message.h>
70 #include <cam/scsi/scsi_pass.h>
72 #include <machine/stdarg.h> /* for xpt_print below */
76 /* Wild guess based on not wanting to grow the stack too much */
77 #define XPT_PRINT_MAXLEN 512
78 #ifdef PRINTF_BUFR_SIZE
79 #define XPT_PRINT_LEN PRINTF_BUFR_SIZE
81 #define XPT_PRINT_LEN 128
83 _Static_assert(XPT_PRINT_LEN <= XPT_PRINT_MAXLEN, "XPT_PRINT_LEN is too large");
86 * This is the maximum number of high powered commands (e.g. start unit)
87 * that can be outstanding at a particular time.
89 #ifndef CAM_MAX_HIGHPOWER
90 #define CAM_MAX_HIGHPOWER 4
93 /* Datastructures internal to the xpt layer */
94 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
95 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
96 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
97 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
100 uint32_t xpt_generation;
102 /* number of high powered commands that can go through right now */
103 struct mtx xpt_highpower_lock;
104 STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
107 /* queue for handling async rescan requests. */
108 TAILQ_HEAD(, ccb_hdr) ccb_scanq;
110 int buses_config_done;
115 * N.B., "busses" is an archaic spelling of "buses". In new code
116 * "buses" is preferred.
118 TAILQ_HEAD(,cam_eb) xpt_busses;
119 u_int bus_generation;
122 struct callout boot_callout;
123 struct task boot_task;
124 struct root_hold_token xpt_rootmount;
126 struct mtx xpt_topo_lock;
127 struct taskqueue *xpt_taskq;
132 DM_RET_FLAG_MASK = 0x0f,
135 DM_RET_DESCEND = 0x20,
137 DM_RET_ACTION_MASK = 0xf0
145 } xpt_traverse_depth;
147 struct xpt_traverse_config {
148 xpt_traverse_depth depth;
153 typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
154 typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
155 typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
156 typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
157 typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
159 /* Transport layer configuration information */
160 static struct xpt_softc xsoftc;
162 MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF);
164 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
165 &xsoftc.boot_delay, 0, "Bus registration wait time");
166 SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD,
167 &xsoftc.xpt_generation, 0, "CAM peripheral generation count");
170 struct mtx_padalign cam_doneq_mtx;
171 STAILQ_HEAD(, ccb_hdr) cam_doneq;
175 static struct cam_doneq cam_doneqs[MAXCPU];
176 static u_int __read_mostly cam_num_doneqs;
177 static struct proc *cam_proc;
178 static struct cam_doneq cam_async;
180 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
181 &cam_num_doneqs, 0, "Number of completion queues/threads");
183 struct cam_periph *xpt_periph;
185 static periph_init_t xpt_periph_init;
187 static struct periph_driver xpt_driver =
189 xpt_periph_init, "xpt",
190 TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
194 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
196 static d_open_t xptopen;
197 static d_close_t xptclose;
198 static d_ioctl_t xptioctl;
199 static d_ioctl_t xptdoioctl;
201 static struct cdevsw xpt_cdevsw = {
202 .d_version = D_VERSION,
210 /* Storage for debugging datastructures */
211 struct cam_path *cam_dpath;
212 uint32_t __read_mostly cam_dflags = CAM_DEBUG_FLAGS;
213 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN,
214 &cam_dflags, 0, "Enabled debug flags");
215 uint32_t cam_debug_delay = CAM_DEBUG_DELAY;
216 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN,
217 &cam_debug_delay, 0, "Delay in us after each debug message");
219 /* Our boot-time initialization hook */
220 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
222 static moduledata_t cam_moduledata = {
224 cam_module_event_handler,
228 static int xpt_init(void *);
230 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
231 MODULE_VERSION(cam, 1);
233 static void xpt_async_bcast(struct async_list *async_head,
235 struct cam_path *path,
237 static path_id_t xptnextfreepathid(void);
238 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
239 static union ccb *xpt_get_ccb(struct cam_periph *periph);
240 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
241 static void xpt_run_allocq(struct cam_periph *periph, int sleep);
242 static void xpt_run_allocq_task(void *context, int pending);
243 static void xpt_run_devq(struct cam_devq *devq);
244 static callout_func_t xpt_release_devq_timeout;
245 static void xpt_acquire_bus(struct cam_eb *bus);
246 static void xpt_release_bus(struct cam_eb *bus);
247 static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
248 static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
250 static struct cam_et*
251 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
252 static void xpt_acquire_target(struct cam_et *target);
253 static void xpt_release_target(struct cam_et *target);
254 static struct cam_eb*
255 xpt_find_bus(path_id_t path_id);
256 static struct cam_et*
257 xpt_find_target(struct cam_eb *bus, target_id_t target_id);
258 static struct cam_ed*
259 xpt_find_device(struct cam_et *target, lun_id_t lun_id);
260 static void xpt_config(void *arg);
261 static void xpt_hold_boot_locked(void);
262 static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
263 uint32_t new_priority);
264 static xpt_devicefunc_t xptpassannouncefunc;
265 static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
266 static void xptpoll(struct cam_sim *sim);
267 static void camisr_runqueue(void);
268 static void xpt_done_process(struct ccb_hdr *ccb_h);
269 static void xpt_done_td(void *);
270 static void xpt_async_td(void *);
271 static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
272 u_int num_patterns, struct cam_eb *bus);
273 static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
275 struct cam_ed *device);
276 static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
278 struct cam_periph *periph);
279 static xpt_busfunc_t xptedtbusfunc;
280 static xpt_targetfunc_t xptedttargetfunc;
281 static xpt_devicefunc_t xptedtdevicefunc;
282 static xpt_periphfunc_t xptedtperiphfunc;
283 static xpt_pdrvfunc_t xptplistpdrvfunc;
284 static xpt_periphfunc_t xptplistperiphfunc;
285 static int xptedtmatch(struct ccb_dev_match *cdm);
286 static int xptperiphlistmatch(struct ccb_dev_match *cdm);
287 static int xptbustraverse(struct cam_eb *start_bus,
288 xpt_busfunc_t *tr_func, void *arg);
289 static int xpttargettraverse(struct cam_eb *bus,
290 struct cam_et *start_target,
291 xpt_targetfunc_t *tr_func, void *arg);
292 static int xptdevicetraverse(struct cam_et *target,
293 struct cam_ed *start_device,
294 xpt_devicefunc_t *tr_func, void *arg);
295 static int xptperiphtraverse(struct cam_ed *device,
296 struct cam_periph *start_periph,
297 xpt_periphfunc_t *tr_func, void *arg);
298 static int xptpdrvtraverse(struct periph_driver **start_pdrv,
299 xpt_pdrvfunc_t *tr_func, void *arg);
300 static int xptpdperiphtraverse(struct periph_driver **pdrv,
301 struct cam_periph *start_periph,
302 xpt_periphfunc_t *tr_func,
304 static xpt_busfunc_t xptdefbusfunc;
305 static xpt_targetfunc_t xptdeftargetfunc;
306 static xpt_devicefunc_t xptdefdevicefunc;
307 static xpt_periphfunc_t xptdefperiphfunc;
308 static void xpt_finishconfig_task(void *context, int pending);
309 static void xpt_dev_async_default(uint32_t async_code,
311 struct cam_et *target,
312 struct cam_ed *device,
314 static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
315 struct cam_et *target,
317 static xpt_devicefunc_t xptsetasyncfunc;
318 static xpt_busfunc_t xptsetasyncbusfunc;
319 static cam_status xptregister(struct cam_periph *periph,
323 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
327 mtx_assert(&devq->send_mtx, MA_OWNED);
328 if ((dev->ccbq.queue.entries > 0) &&
329 (dev->ccbq.dev_openings > 0) &&
330 (dev->ccbq.queue.qfrozen_cnt == 0)) {
332 * The priority of a device waiting for controller
333 * resources is that of the highest priority CCB
337 xpt_schedule_dev(&devq->send_queue,
339 CAMQ_GET_PRIO(&dev->ccbq.queue));
347 device_is_queued(struct cam_ed *device)
349 return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
353 xpt_periph_init(void)
355 make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
359 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
363 * Only allow read-write access.
365 if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
369 * We don't allow nonblocking access.
371 if ((flags & O_NONBLOCK) != 0) {
372 printf("%s: can't do nonblocking access\n", devtoname(dev));
380 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
387 * Don't automatically grab the xpt softc lock here even though this is going
388 * through the xpt device. The xpt device is really just a back door for
389 * accessing other devices and SIMs, so the right thing to do is to grab
390 * the appropriate SIM lock once the bus/SIM is located.
393 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
397 if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
398 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
404 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
412 * For the transport layer CAMIOCOMMAND ioctl, we really only want
413 * to accept CCB types that don't quite make sense to send through a
414 * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
422 inccb = (union ccb *)addr;
423 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
424 if (inccb->ccb_h.func_code == XPT_SCSI_IO)
425 inccb->csio.bio = NULL;
428 if (inccb->ccb_h.flags & CAM_UNLOCKED)
431 bus = xpt_find_bus(inccb->ccb_h.path_id);
435 switch (inccb->ccb_h.func_code) {
438 if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
439 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
440 xpt_release_bus(bus);
445 if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
446 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
447 xpt_release_bus(bus);
455 switch(inccb->ccb_h.func_code) {
463 ccb = xpt_alloc_ccb();
466 * Create a path using the bus, target, and lun the
469 if (xpt_create_path(&ccb->ccb_h.path, NULL,
470 inccb->ccb_h.path_id,
471 inccb->ccb_h.target_id,
472 inccb->ccb_h.target_lun) !=
478 /* Ensure all of our fields are correct */
479 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
480 inccb->ccb_h.pinfo.priority);
481 xpt_merge_ccb(ccb, inccb);
482 xpt_path_lock(ccb->ccb_h.path);
483 cam_periph_runccb(ccb, NULL, 0, 0, NULL);
484 xpt_path_unlock(ccb->ccb_h.path);
485 bcopy(ccb, inccb, sizeof(union ccb));
486 xpt_free_path(ccb->ccb_h.path);
494 * This is an immediate CCB, so it's okay to
495 * allocate it on the stack.
497 memset(&ccb, 0, sizeof(ccb));
500 * Create a path using the bus, target, and lun the
503 if (xpt_create_path(&ccb.ccb_h.path, NULL,
504 inccb->ccb_h.path_id,
505 inccb->ccb_h.target_id,
506 inccb->ccb_h.target_lun) !=
511 /* Ensure all of our fields are correct */
512 xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
513 inccb->ccb_h.pinfo.priority);
514 xpt_merge_ccb(&ccb, inccb);
516 bcopy(&ccb, inccb, sizeof(union ccb));
517 xpt_free_path(ccb.ccb_h.path);
520 case XPT_DEV_MATCH: {
521 struct cam_periph_map_info mapinfo;
522 struct cam_path *old_path;
525 * We can't deal with physical addresses for this
526 * type of transaction.
528 if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
535 * Save this in case the caller had it set to
536 * something in particular.
538 old_path = inccb->ccb_h.path;
541 * We really don't need a path for the matching
542 * code. The path is needed because of the
543 * debugging statements in xpt_action(). They
544 * assume that the CCB has a valid path.
546 inccb->ccb_h.path = xpt_periph->path;
548 bzero(&mapinfo, sizeof(mapinfo));
551 * Map the pattern and match buffers into kernel
552 * virtual address space.
554 error = cam_periph_mapmem(inccb, &mapinfo, maxphys);
557 inccb->ccb_h.path = old_path;
562 * This is an immediate CCB, we can send it on directly.
567 * Map the buffers back into user space.
569 cam_periph_unmapmem(inccb, &mapinfo);
571 inccb->ccb_h.path = old_path;
580 xpt_release_bus(bus);
584 * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
585 * with the periphal driver name and unit name filled in. The other
586 * fields don't really matter as input. The passthrough driver name
587 * ("pass"), and unit number are passed back in the ccb. The current
588 * device generation number, and the index into the device peripheral
589 * driver list, and the status are also passed back. Note that
590 * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
591 * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
592 * (or rather should be) impossible for the device peripheral driver
593 * list to change since we look at the whole thing in one pass, and
594 * we do it with lock protection.
597 case CAMGETPASSTHRU: {
599 struct cam_periph *periph;
600 struct periph_driver **p_drv;
603 bool base_periph_found;
605 ccb = (union ccb *)addr;
606 unit = ccb->cgdl.unit_number;
607 name = ccb->cgdl.periph_name;
608 base_periph_found = false;
609 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
610 if (ccb->ccb_h.func_code == XPT_SCSI_IO)
611 ccb->csio.bio = NULL;
615 * Sanity check -- make sure we don't get a null peripheral
618 if (*ccb->cgdl.periph_name == '\0') {
623 /* Keep the list from changing while we traverse it */
626 /* first find our driver in the list of drivers */
627 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
628 if (strcmp((*p_drv)->driver_name, name) == 0)
631 if (*p_drv == NULL) {
633 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
634 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
635 *ccb->cgdl.periph_name = '\0';
636 ccb->cgdl.unit_number = 0;
642 * Run through every peripheral instance of this driver
643 * and check to see whether it matches the unit passed
644 * in by the user. If it does, get out of the loops and
645 * find the passthrough driver associated with that
648 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
649 periph = TAILQ_NEXT(periph, unit_links)) {
650 if (periph->unit_number == unit)
654 * If we found the peripheral driver that the user passed
655 * in, go through all of the peripheral drivers for that
656 * particular device and look for a passthrough driver.
658 if (periph != NULL) {
659 struct cam_ed *device;
662 base_periph_found = true;
663 device = periph->path->device;
664 for (i = 0, periph = SLIST_FIRST(&device->periphs);
666 periph = SLIST_NEXT(periph, periph_links), i++) {
668 * Check to see whether we have a
669 * passthrough device or not.
671 if (strcmp(periph->periph_name, "pass") == 0) {
673 * Fill in the getdevlist fields.
675 strlcpy(ccb->cgdl.periph_name,
677 sizeof(ccb->cgdl.periph_name));
678 ccb->cgdl.unit_number =
680 if (SLIST_NEXT(periph, periph_links))
682 CAM_GDEVLIST_MORE_DEVS;
685 CAM_GDEVLIST_LAST_DEVICE;
686 ccb->cgdl.generation =
690 * Fill in some CCB header fields
691 * that the user may want.
694 periph->path->bus->path_id;
695 ccb->ccb_h.target_id =
696 periph->path->target->target_id;
697 ccb->ccb_h.target_lun =
698 periph->path->device->lun_id;
699 ccb->ccb_h.status = CAM_REQ_CMP;
706 * If the periph is null here, one of two things has
707 * happened. The first possibility is that we couldn't
708 * find the unit number of the particular peripheral driver
709 * that the user is asking about. e.g. the user asks for
710 * the passthrough driver for "da11". We find the list of
711 * "da" peripherals all right, but there is no unit 11.
712 * The other possibility is that we went through the list
713 * of peripheral drivers attached to the device structure,
714 * but didn't find one with the name "pass". Either way,
715 * we return ENOENT, since we couldn't find something.
717 if (periph == NULL) {
718 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
719 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
720 *ccb->cgdl.periph_name = '\0';
721 ccb->cgdl.unit_number = 0;
724 * It is unfortunate that this is even necessary,
725 * but there are many, many clueless users out there.
726 * If this is true, the user is looking for the
727 * passthrough driver, but doesn't have one in his
730 if (base_periph_found) {
731 printf("xptioctl: pass driver is not in the "
733 printf("xptioctl: put \"device pass\" in "
734 "your kernel config file\n");
749 cam_module_event_handler(module_t mod, int what, void *arg)
755 if ((error = xpt_init(NULL)) != 0)
767 static struct xpt_proto *
768 xpt_proto_find(cam_proto proto)
770 struct xpt_proto **pp;
772 SET_FOREACH(pp, cam_xpt_proto_set) {
773 if ((*pp)->proto == proto)
781 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
784 if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
785 xpt_free_path(done_ccb->ccb_h.path);
786 xpt_free_ccb(done_ccb);
788 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
789 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
794 /* thread to handle bus rescans */
796 xpt_scanner_thread(void *dummy)
800 struct cam_ed *device;
804 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
805 msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
807 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
808 TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
812 * We need to lock the device's mutex which we use as
813 * the path mutex. We can't do it directly because the
814 * cam_path in the ccb may wind up going away because
815 * the path lock may be dropped and the path retired in
816 * the completion callback. We do this directly to keep
817 * the reference counts in cam_path sane. We also have
818 * to copy the device pointer because ccb_h.path may
819 * be freed in the callback.
821 mtx = xpt_path_mtx(ccb->ccb_h.path);
822 device = ccb->ccb_h.path->device;
823 xpt_acquire_device(device);
827 xpt_release_device(device);
835 xpt_rescan(union ccb *ccb)
839 /* Prepare request */
840 if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
841 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
842 ccb->ccb_h.func_code = XPT_SCAN_BUS;
843 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
844 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
845 ccb->ccb_h.func_code = XPT_SCAN_TGT;
846 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
847 ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
848 ccb->ccb_h.func_code = XPT_SCAN_LUN;
850 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
851 xpt_free_path(ccb->ccb_h.path);
855 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
856 ("xpt_rescan: func %#x %s\n", ccb->ccb_h.func_code,
857 xpt_action_name(ccb->ccb_h.func_code)));
859 ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
860 ccb->ccb_h.cbfcnp = xpt_rescan_done;
861 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
862 /* Don't make duplicate entries for the same paths. */
864 if (ccb->ccb_h.ppriv_ptr1 == NULL) {
865 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
866 if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
867 wakeup(&xsoftc.ccb_scanq);
869 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
870 xpt_free_path(ccb->ccb_h.path);
876 TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
877 xpt_hold_boot_locked();
878 wakeup(&xsoftc.ccb_scanq);
882 /* Functions accessed by the peripheral drivers */
884 xpt_init(void *dummy)
886 struct cam_sim *xpt_sim;
887 struct cam_path *path;
888 struct cam_devq *devq;
892 TAILQ_INIT(&xsoftc.xpt_busses);
893 TAILQ_INIT(&xsoftc.ccb_scanq);
894 STAILQ_INIT(&xsoftc.highpowerq);
895 xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
897 mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
898 xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
899 taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
901 #ifdef CAM_BOOT_DELAY
903 * Override this value at compile time to assist our users
904 * who don't use loader to boot a kernel.
906 xsoftc.boot_delay = CAM_BOOT_DELAY;
910 * The xpt layer is, itself, the equivalent of a SIM.
911 * Allow 16 ccbs in the ccb pool for it. This should
912 * give decent parallelism when we probe buses and
913 * perform other XPT functions.
915 devq = cam_simq_alloc(16);
916 xpt_sim = cam_sim_alloc(xptaction,
922 /*max_dev_transactions*/0,
923 /*max_tagged_dev_transactions*/0,
928 if ((error = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
929 printf("xpt_init: xpt_bus_register failed with errno %d,"
930 " failing attach\n", error);
935 * Looking at the XPT from the SIM layer, the XPT is
936 * the equivalent of a peripheral driver. Allocate
937 * a peripheral driver entry for us.
939 if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
941 CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
942 printf("xpt_init: xpt_create_path failed with status %#x,"
943 " failing attach\n", status);
947 cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
948 path, NULL, 0, xpt_sim);
949 xpt_path_unlock(path);
952 if (cam_num_doneqs < 1)
953 cam_num_doneqs = 1 + mp_ncpus / 6;
954 else if (cam_num_doneqs > MAXCPU)
955 cam_num_doneqs = MAXCPU;
956 for (i = 0; i < cam_num_doneqs; i++) {
957 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
959 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
960 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
961 &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
967 if (cam_num_doneqs < 1) {
968 printf("xpt_init: Cannot init completion queues "
969 "- failing attach\n");
973 mtx_init(&cam_async.cam_doneq_mtx, "CAM async", NULL, MTX_DEF);
974 STAILQ_INIT(&cam_async.cam_doneq);
975 if (kproc_kthread_add(xpt_async_td, &cam_async,
976 &cam_proc, NULL, 0, 0, "cam", "async") != 0) {
977 printf("xpt_init: Cannot init async thread "
978 "- failing attach\n");
983 * Register a callback for when interrupts are enabled.
985 config_intrhook_oneshot(xpt_config, NULL);
991 xptregister(struct cam_periph *periph, void *arg)
993 struct cam_sim *xpt_sim;
995 if (periph == NULL) {
996 printf("xptregister: periph was NULL!!\n");
997 return(CAM_REQ_CMP_ERR);
1000 xpt_sim = (struct cam_sim *)arg;
1001 xpt_sim->softc = periph;
1002 xpt_periph = periph;
1003 periph->softc = NULL;
1005 return(CAM_REQ_CMP);
1009 xpt_add_periph(struct cam_periph *periph)
1011 struct cam_ed *device;
1014 TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
1015 device = periph->path->device;
1016 status = CAM_REQ_CMP;
1017 if (device != NULL) {
1018 mtx_lock(&device->target->bus->eb_mtx);
1019 device->generation++;
1020 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
1021 mtx_unlock(&device->target->bus->eb_mtx);
1022 atomic_add_32(&xsoftc.xpt_generation, 1);
1029 xpt_remove_periph(struct cam_periph *periph)
1031 struct cam_ed *device;
1033 device = periph->path->device;
1034 if (device != NULL) {
1035 mtx_lock(&device->target->bus->eb_mtx);
1036 device->generation++;
1037 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
1038 mtx_unlock(&device->target->bus->eb_mtx);
1039 atomic_add_32(&xsoftc.xpt_generation, 1);
1044 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1049 (void)sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN | SBUF_INCLUDENUL);
1050 sbuf_set_drain(&sb, sbuf_printf_drain, NULL);
1051 xpt_announce_periph_sbuf(periph, &sb, announce_string);
1052 (void)sbuf_finish(&sb);
1056 xpt_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb,
1057 char *announce_string)
1059 struct cam_path *path = periph->path;
1060 struct xpt_proto *proto;
1062 cam_periph_assert(periph, MA_OWNED);
1063 periph->flags |= CAM_PERIPH_ANNOUNCED;
1065 sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1066 periph->periph_name, periph->unit_number,
1067 path->bus->sim->sim_name,
1068 path->bus->sim->unit_number,
1069 path->bus->sim->bus_id,
1071 path->target->target_id,
1072 (uintmax_t)path->device->lun_id);
1073 sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
1074 proto = xpt_proto_find(path->device->protocol);
1076 proto->ops->announce_sbuf(path->device, sb);
1078 sbuf_printf(sb, "Unknown protocol device %d\n",
1079 path->device->protocol);
1080 if (path->device->serial_num_len > 0) {
1081 /* Don't wrap the screen - print only the first 60 chars */
1082 sbuf_printf(sb, "%s%d: Serial Number %.60s\n",
1083 periph->periph_name, periph->unit_number,
1084 path->device->serial_num);
1086 /* Announce transport details. */
1087 path->bus->xport->ops->announce_sbuf(periph, sb);
1088 /* Announce command queueing. */
1089 if (path->device->inq_flags & SID_CmdQue
1090 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1091 sbuf_printf(sb, "%s%d: Command Queueing enabled\n",
1092 periph->periph_name, periph->unit_number);
1094 /* Announce caller's details if they've passed in. */
1095 if (announce_string != NULL)
1096 sbuf_printf(sb, "%s%d: %s\n", periph->periph_name,
1097 periph->unit_number, announce_string);
1101 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1104 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1105 periph->unit_number, quirks, bit_string);
1110 xpt_announce_quirks_sbuf(struct cam_periph *periph, struct sbuf *sb,
1111 int quirks, char *bit_string)
1114 sbuf_printf(sb, "%s%d: quirks=0x%b\n", periph->periph_name,
1115 periph->unit_number, quirks, bit_string);
1120 xpt_denounce_periph(struct cam_periph *periph)
1125 (void)sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN | SBUF_INCLUDENUL);
1126 sbuf_set_drain(&sb, sbuf_printf_drain, NULL);
1127 xpt_denounce_periph_sbuf(periph, &sb);
1128 (void)sbuf_finish(&sb);
1132 xpt_denounce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb)
1134 struct cam_path *path = periph->path;
1135 struct xpt_proto *proto;
1137 cam_periph_assert(periph, MA_OWNED);
1139 sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1140 periph->periph_name, periph->unit_number,
1141 path->bus->sim->sim_name,
1142 path->bus->sim->unit_number,
1143 path->bus->sim->bus_id,
1145 path->target->target_id,
1146 (uintmax_t)path->device->lun_id);
1147 sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number);
1148 proto = xpt_proto_find(path->device->protocol);
1150 proto->ops->denounce_sbuf(path->device, sb);
1152 sbuf_printf(sb, "Unknown protocol device %d",
1153 path->device->protocol);
1154 if (path->device->serial_num_len > 0)
1155 sbuf_printf(sb, " s/n %.60s", path->device->serial_num);
1156 sbuf_printf(sb, " detached\n");
1160 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1163 struct ccb_dev_advinfo cdai;
1164 struct scsi_vpd_device_id *did;
1165 struct scsi_vpd_id_descriptor *idd;
1167 xpt_path_assert(path, MA_OWNED);
1169 memset(&cdai, 0, sizeof(cdai));
1170 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1171 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1172 cdai.flags = CDAI_FLAG_NONE;
1176 if (!strcmp(attr, "GEOM::ident"))
1177 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1178 else if (!strcmp(attr, "GEOM::physpath"))
1179 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1180 else if (strcmp(attr, "GEOM::lunid") == 0 ||
1181 strcmp(attr, "GEOM::lunname") == 0) {
1182 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1183 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1184 cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT);
1185 if (cdai.buf == NULL) {
1192 xpt_action((union ccb *)&cdai); /* can only be synchronous */
1193 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1194 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1195 if (cdai.provsiz == 0)
1197 switch(cdai.buftype) {
1198 case CDAI_TYPE_SCSI_DEVID:
1199 did = (struct scsi_vpd_device_id *)cdai.buf;
1200 if (strcmp(attr, "GEOM::lunid") == 0) {
1201 idd = scsi_get_devid(did, cdai.provsiz,
1202 scsi_devid_is_lun_naa);
1204 idd = scsi_get_devid(did, cdai.provsiz,
1205 scsi_devid_is_lun_eui64);
1207 idd = scsi_get_devid(did, cdai.provsiz,
1208 scsi_devid_is_lun_uuid);
1210 idd = scsi_get_devid(did, cdai.provsiz,
1211 scsi_devid_is_lun_md5);
1216 idd = scsi_get_devid(did, cdai.provsiz,
1217 scsi_devid_is_lun_t10);
1219 idd = scsi_get_devid(did, cdai.provsiz,
1220 scsi_devid_is_lun_name);
1225 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) ==
1226 SVPD_ID_CODESET_ASCII) {
1227 if (idd->length < len) {
1228 for (l = 0; l < idd->length; l++)
1229 buf[l] = idd->identifier[l] ?
1230 idd->identifier[l] : ' ';
1236 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) ==
1237 SVPD_ID_CODESET_UTF8) {
1238 l = strnlen(idd->identifier, idd->length);
1240 bcopy(idd->identifier, buf, l);
1246 if ((idd->id_type & SVPD_ID_TYPE_MASK) ==
1247 SVPD_ID_TYPE_UUID && idd->identifier[0] == 0x10) {
1248 if ((idd->length - 2) * 2 + 4 >= len) {
1252 for (l = 2, o = 0; l < idd->length; l++) {
1253 if (l == 6 || l == 8 || l == 10 || l == 12)
1254 o += sprintf(buf + o, "-");
1255 o += sprintf(buf + o, "%02x",
1256 idd->identifier[l]);
1260 if (idd->length * 2 < len) {
1261 for (l = 0; l < idd->length; l++)
1262 sprintf(buf + l * 2, "%02x",
1263 idd->identifier[l]);
1268 if (cdai.provsiz < len) {
1269 cdai.buf[cdai.provsiz] = 0;
1277 if ((char *)cdai.buf != buf)
1278 free(cdai.buf, M_CAMXPT);
1282 static dev_match_ret
1283 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1286 dev_match_ret retval;
1289 retval = DM_RET_NONE;
1292 * If we aren't given something to match against, that's an error.
1295 return(DM_RET_ERROR);
1298 * If there are no match entries, then this bus matches no
1301 if ((patterns == NULL) || (num_patterns == 0))
1302 return(DM_RET_DESCEND | DM_RET_COPY);
1304 for (i = 0; i < num_patterns; i++) {
1305 struct bus_match_pattern *cur_pattern;
1306 struct device_match_pattern *dp = &patterns[i].pattern.device_pattern;
1307 struct periph_match_pattern *pp = &patterns[i].pattern.periph_pattern;
1310 * If the pattern in question isn't for a bus node, we
1311 * aren't interested. However, we do indicate to the
1312 * calling routine that we should continue descending the
1313 * tree, since the user wants to match against lower-level
1316 if (patterns[i].type == DEV_MATCH_DEVICE &&
1317 (dp->flags & DEV_MATCH_PATH) != 0 &&
1318 dp->path_id != bus->path_id)
1320 if (patterns[i].type == DEV_MATCH_PERIPH &&
1321 (pp->flags & PERIPH_MATCH_PATH) != 0 &&
1322 pp->path_id != bus->path_id)
1324 if (patterns[i].type != DEV_MATCH_BUS) {
1325 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1326 retval |= DM_RET_DESCEND;
1330 cur_pattern = &patterns[i].pattern.bus_pattern;
1332 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1333 && (cur_pattern->path_id != bus->path_id))
1336 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1337 && (cur_pattern->bus_id != bus->sim->bus_id))
1340 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1341 && (cur_pattern->unit_number != bus->sim->unit_number))
1344 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1345 && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1350 * If we get to this point, the user definitely wants
1351 * information on this bus. So tell the caller to copy the
1354 retval |= DM_RET_COPY;
1357 * If the return action has been set to descend, then we
1358 * know that we've already seen a non-bus matching
1359 * expression, therefore we need to further descend the tree.
1360 * This won't change by continuing around the loop, so we
1361 * go ahead and return. If we haven't seen a non-bus
1362 * matching expression, we keep going around the loop until
1363 * we exhaust the matching expressions. We'll set the stop
1364 * flag once we fall out of the loop.
1366 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1371 * If the return action hasn't been set to descend yet, that means
1372 * we haven't seen anything other than bus matching patterns. So
1373 * tell the caller to stop descending the tree -- the user doesn't
1374 * want to match against lower level tree elements.
1376 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1377 retval |= DM_RET_STOP;
1382 static dev_match_ret
1383 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1384 struct cam_ed *device)
1386 dev_match_ret retval;
1389 retval = DM_RET_NONE;
1392 * If we aren't given something to match against, that's an error.
1395 return(DM_RET_ERROR);
1398 * If there are no match entries, then this device matches no
1401 if ((patterns == NULL) || (num_patterns == 0))
1402 return(DM_RET_DESCEND | DM_RET_COPY);
1404 for (i = 0; i < num_patterns; i++) {
1405 struct device_match_pattern *cur_pattern;
1406 struct scsi_vpd_device_id *device_id_page;
1407 struct periph_match_pattern *pp = &patterns[i].pattern.periph_pattern;
1410 * If the pattern in question isn't for a device node, we
1411 * aren't interested.
1413 if (patterns[i].type == DEV_MATCH_PERIPH &&
1414 (pp->flags & PERIPH_MATCH_TARGET) != 0 &&
1415 pp->target_id != device->target->target_id)
1417 if (patterns[i].type == DEV_MATCH_PERIPH &&
1418 (pp->flags & PERIPH_MATCH_LUN) != 0 &&
1419 pp->target_lun != device->lun_id)
1421 if (patterns[i].type != DEV_MATCH_DEVICE) {
1422 if ((patterns[i].type == DEV_MATCH_PERIPH)
1423 && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1424 retval |= DM_RET_DESCEND;
1428 cur_pattern = &patterns[i].pattern.device_pattern;
1430 /* Error out if mutually exclusive options are specified. */
1431 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1432 == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1433 return(DM_RET_ERROR);
1435 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1436 && (cur_pattern->path_id != device->target->bus->path_id))
1439 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1440 && (cur_pattern->target_id != device->target->target_id))
1443 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1444 && (cur_pattern->target_lun != device->lun_id))
1447 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1448 && (cam_quirkmatch((caddr_t)&device->inq_data,
1449 (caddr_t)&cur_pattern->data.inq_pat,
1450 1, sizeof(cur_pattern->data.inq_pat),
1451 scsi_static_inquiry_match) == NULL))
1454 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1455 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1456 && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1457 || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1458 device->device_id_len
1459 - SVPD_DEVICE_ID_HDR_LEN,
1460 cur_pattern->data.devid_pat.id,
1461 cur_pattern->data.devid_pat.id_len) != 0))
1465 * If we get to this point, the user definitely wants
1466 * information on this device. So tell the caller to copy
1469 retval |= DM_RET_COPY;
1472 * If the return action has been set to descend, then we
1473 * know that we've already seen a peripheral matching
1474 * expression, therefore we need to further descend the tree.
1475 * This won't change by continuing around the loop, so we
1476 * go ahead and return. If we haven't seen a peripheral
1477 * matching expression, we keep going around the loop until
1478 * we exhaust the matching expressions. We'll set the stop
1479 * flag once we fall out of the loop.
1481 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1486 * If the return action hasn't been set to descend yet, that means
1487 * we haven't seen any peripheral matching patterns. So tell the
1488 * caller to stop descending the tree -- the user doesn't want to
1489 * match against lower level tree elements.
1491 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1492 retval |= DM_RET_STOP;
1498 * Match a single peripheral against any number of match patterns.
1500 static dev_match_ret
1501 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1502 struct cam_periph *periph)
1504 dev_match_ret retval;
1508 * If we aren't given something to match against, that's an error.
1511 return(DM_RET_ERROR);
1514 * If there are no match entries, then this peripheral matches no
1517 if ((patterns == NULL) || (num_patterns == 0))
1518 return(DM_RET_STOP | DM_RET_COPY);
1521 * There aren't any nodes below a peripheral node, so there's no
1522 * reason to descend the tree any further.
1524 retval = DM_RET_STOP;
1526 for (i = 0; i < num_patterns; i++) {
1527 struct periph_match_pattern *cur_pattern;
1530 * If the pattern in question isn't for a peripheral, we
1531 * aren't interested.
1533 if (patterns[i].type != DEV_MATCH_PERIPH)
1536 cur_pattern = &patterns[i].pattern.periph_pattern;
1538 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1539 && (cur_pattern->path_id != periph->path->bus->path_id))
1543 * For the target and lun id's, we have to make sure the
1544 * target and lun pointers aren't NULL. The xpt peripheral
1545 * has a wildcard target and device.
1547 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1548 && ((periph->path->target == NULL)
1549 ||(cur_pattern->target_id != periph->path->target->target_id)))
1552 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1553 && ((periph->path->device == NULL)
1554 || (cur_pattern->target_lun != periph->path->device->lun_id)))
1557 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1558 && (cur_pattern->unit_number != periph->unit_number))
1561 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1562 && (strncmp(cur_pattern->periph_name, periph->periph_name,
1567 * If we get to this point, the user definitely wants
1568 * information on this peripheral. So tell the caller to
1569 * copy the data out.
1571 retval |= DM_RET_COPY;
1574 * The return action has already been set to stop, since
1575 * peripherals don't have any nodes below them in the EDT.
1581 * If we get to this point, the peripheral that was passed in
1582 * doesn't match any of the patterns.
1588 xptedtbusfunc(struct cam_eb *bus, void *arg)
1590 struct ccb_dev_match *cdm;
1591 struct cam_et *target;
1592 dev_match_ret retval;
1594 cdm = (struct ccb_dev_match *)arg;
1597 * If our position is for something deeper in the tree, that means
1598 * that we've already seen this node. So, we keep going down.
1600 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1601 && (cdm->pos.cookie.bus == bus)
1602 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1603 && (cdm->pos.cookie.target != NULL))
1604 retval = DM_RET_DESCEND;
1606 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1609 * If we got an error, bail out of the search.
1611 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1612 cdm->status = CAM_DEV_MATCH_ERROR;
1617 * If the copy flag is set, copy this bus out.
1619 if (retval & DM_RET_COPY) {
1622 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1623 sizeof(struct dev_match_result));
1626 * If we don't have enough space to put in another
1627 * match result, save our position and tell the
1628 * user there are more devices to check.
1630 if (spaceleft < sizeof(struct dev_match_result)) {
1631 bzero(&cdm->pos, sizeof(cdm->pos));
1632 cdm->pos.position_type =
1633 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1635 cdm->pos.cookie.bus = bus;
1636 cdm->pos.generations[CAM_BUS_GENERATION]=
1637 xsoftc.bus_generation;
1638 cdm->status = CAM_DEV_MATCH_MORE;
1641 j = cdm->num_matches;
1643 cdm->matches[j].type = DEV_MATCH_BUS;
1644 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1645 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1646 cdm->matches[j].result.bus_result.unit_number =
1647 bus->sim->unit_number;
1648 strlcpy(cdm->matches[j].result.bus_result.dev_name,
1650 sizeof(cdm->matches[j].result.bus_result.dev_name));
1654 * If the user is only interested in buses, there's no
1655 * reason to descend to the next level in the tree.
1657 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1661 * If there is a target generation recorded, check it to
1662 * make sure the target list hasn't changed.
1664 mtx_lock(&bus->eb_mtx);
1665 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1666 && (cdm->pos.cookie.bus == bus)
1667 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1668 && (cdm->pos.cookie.target != NULL)) {
1669 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1671 mtx_unlock(&bus->eb_mtx);
1672 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1675 target = (struct cam_et *)cdm->pos.cookie.target;
1679 mtx_unlock(&bus->eb_mtx);
1681 return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1685 xptedttargetfunc(struct cam_et *target, void *arg)
1687 struct ccb_dev_match *cdm;
1689 struct cam_ed *device;
1691 cdm = (struct ccb_dev_match *)arg;
1695 * If there is a device list generation recorded, check it to
1696 * make sure the device list hasn't changed.
1698 mtx_lock(&bus->eb_mtx);
1699 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1700 && (cdm->pos.cookie.bus == bus)
1701 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1702 && (cdm->pos.cookie.target == target)
1703 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1704 && (cdm->pos.cookie.device != NULL)) {
1705 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1706 target->generation) {
1707 mtx_unlock(&bus->eb_mtx);
1708 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1711 device = (struct cam_ed *)cdm->pos.cookie.device;
1715 mtx_unlock(&bus->eb_mtx);
1717 return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1721 xptedtdevicefunc(struct cam_ed *device, void *arg)
1724 struct cam_periph *periph;
1725 struct ccb_dev_match *cdm;
1726 dev_match_ret retval;
1728 cdm = (struct ccb_dev_match *)arg;
1729 bus = device->target->bus;
1732 * If our position is for something deeper in the tree, that means
1733 * that we've already seen this node. So, we keep going down.
1735 if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1736 && (cdm->pos.cookie.device == device)
1737 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1738 && (cdm->pos.cookie.periph != NULL))
1739 retval = DM_RET_DESCEND;
1741 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1744 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1745 cdm->status = CAM_DEV_MATCH_ERROR;
1750 * If the copy flag is set, copy this device out.
1752 if (retval & DM_RET_COPY) {
1755 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1756 sizeof(struct dev_match_result));
1759 * If we don't have enough space to put in another
1760 * match result, save our position and tell the
1761 * user there are more devices to check.
1763 if (spaceleft < sizeof(struct dev_match_result)) {
1764 bzero(&cdm->pos, sizeof(cdm->pos));
1765 cdm->pos.position_type =
1766 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1767 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1769 cdm->pos.cookie.bus = device->target->bus;
1770 cdm->pos.generations[CAM_BUS_GENERATION]=
1771 xsoftc.bus_generation;
1772 cdm->pos.cookie.target = device->target;
1773 cdm->pos.generations[CAM_TARGET_GENERATION] =
1774 device->target->bus->generation;
1775 cdm->pos.cookie.device = device;
1776 cdm->pos.generations[CAM_DEV_GENERATION] =
1777 device->target->generation;
1778 cdm->status = CAM_DEV_MATCH_MORE;
1781 j = cdm->num_matches;
1783 cdm->matches[j].type = DEV_MATCH_DEVICE;
1784 cdm->matches[j].result.device_result.path_id =
1785 device->target->bus->path_id;
1786 cdm->matches[j].result.device_result.target_id =
1787 device->target->target_id;
1788 cdm->matches[j].result.device_result.target_lun =
1790 cdm->matches[j].result.device_result.protocol =
1792 bcopy(&device->inq_data,
1793 &cdm->matches[j].result.device_result.inq_data,
1794 sizeof(struct scsi_inquiry_data));
1795 bcopy(&device->ident_data,
1796 &cdm->matches[j].result.device_result.ident_data,
1797 sizeof(struct ata_params));
1799 /* Let the user know whether this device is unconfigured */
1800 if (device->flags & CAM_DEV_UNCONFIGURED)
1801 cdm->matches[j].result.device_result.flags =
1802 DEV_RESULT_UNCONFIGURED;
1804 cdm->matches[j].result.device_result.flags =
1809 * If the user isn't interested in peripherals, don't descend
1810 * the tree any further.
1812 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1816 * If there is a peripheral list generation recorded, make sure
1817 * it hasn't changed.
1820 mtx_lock(&bus->eb_mtx);
1821 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1822 && (cdm->pos.cookie.bus == bus)
1823 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1824 && (cdm->pos.cookie.target == device->target)
1825 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1826 && (cdm->pos.cookie.device == device)
1827 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1828 && (cdm->pos.cookie.periph != NULL)) {
1829 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1830 device->generation) {
1831 mtx_unlock(&bus->eb_mtx);
1833 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1836 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1840 mtx_unlock(&bus->eb_mtx);
1843 return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1847 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1849 struct ccb_dev_match *cdm;
1850 dev_match_ret retval;
1852 cdm = (struct ccb_dev_match *)arg;
1854 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1856 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1857 cdm->status = CAM_DEV_MATCH_ERROR;
1862 * If the copy flag is set, copy this peripheral out.
1864 if (retval & DM_RET_COPY) {
1868 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1869 sizeof(struct dev_match_result));
1872 * If we don't have enough space to put in another
1873 * match result, save our position and tell the
1874 * user there are more devices to check.
1876 if (spaceleft < sizeof(struct dev_match_result)) {
1877 bzero(&cdm->pos, sizeof(cdm->pos));
1878 cdm->pos.position_type =
1879 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1880 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
1883 cdm->pos.cookie.bus = periph->path->bus;
1884 cdm->pos.generations[CAM_BUS_GENERATION]=
1885 xsoftc.bus_generation;
1886 cdm->pos.cookie.target = periph->path->target;
1887 cdm->pos.generations[CAM_TARGET_GENERATION] =
1888 periph->path->bus->generation;
1889 cdm->pos.cookie.device = periph->path->device;
1890 cdm->pos.generations[CAM_DEV_GENERATION] =
1891 periph->path->target->generation;
1892 cdm->pos.cookie.periph = periph;
1893 cdm->pos.generations[CAM_PERIPH_GENERATION] =
1894 periph->path->device->generation;
1895 cdm->status = CAM_DEV_MATCH_MORE;
1899 j = cdm->num_matches;
1901 cdm->matches[j].type = DEV_MATCH_PERIPH;
1902 cdm->matches[j].result.periph_result.path_id =
1903 periph->path->bus->path_id;
1904 cdm->matches[j].result.periph_result.target_id =
1905 periph->path->target->target_id;
1906 cdm->matches[j].result.periph_result.target_lun =
1907 periph->path->device->lun_id;
1908 cdm->matches[j].result.periph_result.unit_number =
1909 periph->unit_number;
1910 l = sizeof(cdm->matches[j].result.periph_result.periph_name);
1911 strlcpy(cdm->matches[j].result.periph_result.periph_name,
1912 periph->periph_name, l);
1919 xptedtmatch(struct ccb_dev_match *cdm)
1924 cdm->num_matches = 0;
1927 * Check the bus list generation. If it has changed, the user
1928 * needs to reset everything and start over.
1931 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1932 && (cdm->pos.cookie.bus != NULL)) {
1933 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
1934 xsoftc.bus_generation) {
1936 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1939 bus = (struct cam_eb *)cdm->pos.cookie.bus;
1945 ret = xptbustraverse(bus, xptedtbusfunc, cdm);
1948 * If we get back 0, that means that we had to stop before fully
1949 * traversing the EDT. It also means that one of the subroutines
1950 * has set the status field to the proper value. If we get back 1,
1951 * we've fully traversed the EDT and copied out any matching entries.
1954 cdm->status = CAM_DEV_MATCH_LAST;
1960 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
1962 struct cam_periph *periph;
1963 struct ccb_dev_match *cdm;
1965 cdm = (struct ccb_dev_match *)arg;
1968 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
1969 && (cdm->pos.cookie.pdrv == pdrv)
1970 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1971 && (cdm->pos.cookie.periph != NULL)) {
1972 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1973 (*pdrv)->generation) {
1975 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1978 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1984 return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
1988 xptplistperiphfunc(struct cam_periph *periph, void *arg)
1990 struct ccb_dev_match *cdm;
1991 dev_match_ret retval;
1993 cdm = (struct ccb_dev_match *)arg;
1995 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1997 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1998 cdm->status = CAM_DEV_MATCH_ERROR;
2003 * If the copy flag is set, copy this peripheral out.
2005 if (retval & DM_RET_COPY) {
2009 spaceleft = cdm->match_buf_len - (cdm->num_matches *
2010 sizeof(struct dev_match_result));
2013 * If we don't have enough space to put in another
2014 * match result, save our position and tell the
2015 * user there are more devices to check.
2017 if (spaceleft < sizeof(struct dev_match_result)) {
2018 struct periph_driver **pdrv;
2021 bzero(&cdm->pos, sizeof(cdm->pos));
2022 cdm->pos.position_type =
2023 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
2027 * This may look a bit non-sensical, but it is
2028 * actually quite logical. There are very few
2029 * peripheral drivers, and bloating every peripheral
2030 * structure with a pointer back to its parent
2031 * peripheral driver linker set entry would cost
2032 * more in the long run than doing this quick lookup.
2034 for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
2035 if (strcmp((*pdrv)->driver_name,
2036 periph->periph_name) == 0)
2040 if (*pdrv == NULL) {
2041 cdm->status = CAM_DEV_MATCH_ERROR;
2045 cdm->pos.cookie.pdrv = pdrv;
2047 * The periph generation slot does double duty, as
2048 * does the periph pointer slot. They are used for
2049 * both edt and pdrv lookups and positioning.
2051 cdm->pos.cookie.periph = periph;
2052 cdm->pos.generations[CAM_PERIPH_GENERATION] =
2053 (*pdrv)->generation;
2054 cdm->status = CAM_DEV_MATCH_MORE;
2058 j = cdm->num_matches;
2060 cdm->matches[j].type = DEV_MATCH_PERIPH;
2061 cdm->matches[j].result.periph_result.path_id =
2062 periph->path->bus->path_id;
2065 * The transport layer peripheral doesn't have a target or
2068 if (periph->path->target)
2069 cdm->matches[j].result.periph_result.target_id =
2070 periph->path->target->target_id;
2072 cdm->matches[j].result.periph_result.target_id =
2073 CAM_TARGET_WILDCARD;
2075 if (periph->path->device)
2076 cdm->matches[j].result.periph_result.target_lun =
2077 periph->path->device->lun_id;
2079 cdm->matches[j].result.periph_result.target_lun =
2082 cdm->matches[j].result.periph_result.unit_number =
2083 periph->unit_number;
2084 l = sizeof(cdm->matches[j].result.periph_result.periph_name);
2085 strlcpy(cdm->matches[j].result.periph_result.periph_name,
2086 periph->periph_name, l);
2093 xptperiphlistmatch(struct ccb_dev_match *cdm)
2097 cdm->num_matches = 0;
2100 * At this point in the edt traversal function, we check the bus
2101 * list generation to make sure that no buses have been added or
2102 * removed since the user last sent a XPT_DEV_MATCH ccb through.
2103 * For the peripheral driver list traversal function, however, we
2104 * don't have to worry about new peripheral driver types coming or
2105 * going; they're in a linker set, and therefore can't change
2106 * without a recompile.
2109 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2110 && (cdm->pos.cookie.pdrv != NULL))
2111 ret = xptpdrvtraverse(
2112 (struct periph_driver **)cdm->pos.cookie.pdrv,
2113 xptplistpdrvfunc, cdm);
2115 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2118 * If we get back 0, that means that we had to stop before fully
2119 * traversing the peripheral driver tree. It also means that one of
2120 * the subroutines has set the status field to the proper value. If
2121 * we get back 1, we've fully traversed the EDT and copied out any
2125 cdm->status = CAM_DEV_MATCH_LAST;
2131 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2133 struct cam_eb *bus, *next_bus;
2141 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2149 for (; bus != NULL; bus = next_bus) {
2150 retval = tr_func(bus, arg);
2152 xpt_release_bus(bus);
2156 next_bus = TAILQ_NEXT(bus, links);
2158 next_bus->refcount++;
2160 xpt_release_bus(bus);
2166 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2167 xpt_targetfunc_t *tr_func, void *arg)
2169 struct cam_et *target, *next_target;
2174 target = start_target;
2176 mtx_lock(&bus->eb_mtx);
2177 target = TAILQ_FIRST(&bus->et_entries);
2178 if (target == NULL) {
2179 mtx_unlock(&bus->eb_mtx);
2183 mtx_unlock(&bus->eb_mtx);
2185 for (; target != NULL; target = next_target) {
2186 retval = tr_func(target, arg);
2188 xpt_release_target(target);
2191 mtx_lock(&bus->eb_mtx);
2192 next_target = TAILQ_NEXT(target, links);
2194 next_target->refcount++;
2195 mtx_unlock(&bus->eb_mtx);
2196 xpt_release_target(target);
2202 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2203 xpt_devicefunc_t *tr_func, void *arg)
2206 struct cam_ed *device, *next_device;
2212 device = start_device;
2214 mtx_lock(&bus->eb_mtx);
2215 device = TAILQ_FIRST(&target->ed_entries);
2216 if (device == NULL) {
2217 mtx_unlock(&bus->eb_mtx);
2221 mtx_unlock(&bus->eb_mtx);
2223 for (; device != NULL; device = next_device) {
2224 mtx_lock(&device->device_mtx);
2225 retval = tr_func(device, arg);
2226 mtx_unlock(&device->device_mtx);
2228 xpt_release_device(device);
2231 mtx_lock(&bus->eb_mtx);
2232 next_device = TAILQ_NEXT(device, links);
2234 next_device->refcount++;
2235 mtx_unlock(&bus->eb_mtx);
2236 xpt_release_device(device);
2242 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2243 xpt_periphfunc_t *tr_func, void *arg)
2246 struct cam_periph *periph, *next_periph;
2251 bus = device->target->bus;
2253 periph = start_periph;
2256 mtx_lock(&bus->eb_mtx);
2257 periph = SLIST_FIRST(&device->periphs);
2258 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2259 periph = SLIST_NEXT(periph, periph_links);
2260 if (periph == NULL) {
2261 mtx_unlock(&bus->eb_mtx);
2266 mtx_unlock(&bus->eb_mtx);
2269 for (; periph != NULL; periph = next_periph) {
2270 retval = tr_func(periph, arg);
2272 cam_periph_release_locked(periph);
2276 mtx_lock(&bus->eb_mtx);
2277 next_periph = SLIST_NEXT(periph, periph_links);
2278 while (next_periph != NULL &&
2279 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2280 next_periph = SLIST_NEXT(next_periph, periph_links);
2282 next_periph->refcount++;
2283 mtx_unlock(&bus->eb_mtx);
2285 cam_periph_release_locked(periph);
2291 xptpdrvtraverse(struct periph_driver **start_pdrv,
2292 xpt_pdrvfunc_t *tr_func, void *arg)
2294 struct periph_driver **pdrv;
2300 * We don't traverse the peripheral driver list like we do the
2301 * other lists, because it is a linker set, and therefore cannot be
2302 * changed during runtime. If the peripheral driver list is ever
2303 * re-done to be something other than a linker set (i.e. it can
2304 * change while the system is running), the list traversal should
2305 * be modified to work like the other traversal functions.
2307 for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2308 *pdrv != NULL; pdrv++) {
2309 retval = tr_func(pdrv, arg);
2319 xptpdperiphtraverse(struct periph_driver **pdrv,
2320 struct cam_periph *start_periph,
2321 xpt_periphfunc_t *tr_func, void *arg)
2323 struct cam_periph *periph, *next_periph;
2329 periph = start_periph;
2332 periph = TAILQ_FIRST(&(*pdrv)->units);
2333 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2334 periph = TAILQ_NEXT(periph, unit_links);
2335 if (periph == NULL) {
2342 for (; periph != NULL; periph = next_periph) {
2343 cam_periph_lock(periph);
2344 retval = tr_func(periph, arg);
2345 cam_periph_unlock(periph);
2347 cam_periph_release(periph);
2351 next_periph = TAILQ_NEXT(periph, unit_links);
2352 while (next_periph != NULL &&
2353 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2354 next_periph = TAILQ_NEXT(next_periph, unit_links);
2356 next_periph->refcount++;
2358 cam_periph_release(periph);
2364 xptdefbusfunc(struct cam_eb *bus, void *arg)
2366 struct xpt_traverse_config *tr_config;
2368 tr_config = (struct xpt_traverse_config *)arg;
2370 if (tr_config->depth == XPT_DEPTH_BUS) {
2371 xpt_busfunc_t *tr_func;
2373 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2375 return(tr_func(bus, tr_config->tr_arg));
2377 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2381 xptdeftargetfunc(struct cam_et *target, void *arg)
2383 struct xpt_traverse_config *tr_config;
2385 tr_config = (struct xpt_traverse_config *)arg;
2387 if (tr_config->depth == XPT_DEPTH_TARGET) {
2388 xpt_targetfunc_t *tr_func;
2390 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2392 return(tr_func(target, tr_config->tr_arg));
2394 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2398 xptdefdevicefunc(struct cam_ed *device, void *arg)
2400 struct xpt_traverse_config *tr_config;
2402 tr_config = (struct xpt_traverse_config *)arg;
2404 if (tr_config->depth == XPT_DEPTH_DEVICE) {
2405 xpt_devicefunc_t *tr_func;
2407 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2409 return(tr_func(device, tr_config->tr_arg));
2411 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2415 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2417 struct xpt_traverse_config *tr_config;
2418 xpt_periphfunc_t *tr_func;
2420 tr_config = (struct xpt_traverse_config *)arg;
2422 tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2425 * Unlike the other default functions, we don't check for depth
2426 * here. The peripheral driver level is the last level in the EDT,
2427 * so if we're here, we should execute the function in question.
2429 return(tr_func(periph, tr_config->tr_arg));
2433 * Execute the given function for every bus in the EDT.
2436 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2438 struct xpt_traverse_config tr_config;
2440 tr_config.depth = XPT_DEPTH_BUS;
2441 tr_config.tr_func = tr_func;
2442 tr_config.tr_arg = arg;
2444 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2448 * Execute the given function for every device in the EDT.
2451 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2453 struct xpt_traverse_config tr_config;
2455 tr_config.depth = XPT_DEPTH_DEVICE;
2456 tr_config.tr_func = tr_func;
2457 tr_config.tr_arg = arg;
2459 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2463 xptsetasyncfunc(struct cam_ed *device, void *arg)
2465 struct cam_path path;
2466 struct ccb_getdev cgd;
2467 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2470 * Don't report unconfigured devices (Wildcard devs,
2471 * devices only for target mode, device instances
2472 * that have been invalidated but are waiting for
2473 * their last reference count to be released).
2475 if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2478 memset(&cgd, 0, sizeof(cgd));
2479 xpt_compile_path(&path,
2481 device->target->bus->path_id,
2482 device->target->target_id,
2484 xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2485 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2486 xpt_action((union ccb *)&cgd);
2487 csa->callback(csa->callback_arg,
2490 xpt_release_path(&path);
2496 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2498 struct cam_path path;
2499 struct ccb_pathinq cpi;
2500 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2502 xpt_compile_path(&path, /*periph*/NULL,
2504 CAM_TARGET_WILDCARD,
2506 xpt_path_lock(&path);
2507 xpt_path_inq(&cpi, &path);
2508 csa->callback(csa->callback_arg,
2511 xpt_path_unlock(&path);
2512 xpt_release_path(&path);
2518 xpt_action(union ccb *start_ccb)
2521 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
2522 ("xpt_action: func %#x %s\n", start_ccb->ccb_h.func_code,
2523 xpt_action_name(start_ccb->ccb_h.func_code)));
2525 start_ccb->ccb_h.status = CAM_REQ_INPROG;
2526 (*(start_ccb->ccb_h.path->bus->xport->ops->action))(start_ccb);
2530 xpt_action_default(union ccb *start_ccb)
2532 struct cam_path *path;
2533 struct cam_sim *sim;
2536 path = start_ccb->ccb_h.path;
2537 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2538 ("xpt_action_default: func %#x %s\n", start_ccb->ccb_h.func_code,
2539 xpt_action_name(start_ccb->ccb_h.func_code)));
2541 switch (start_ccb->ccb_h.func_code) {
2544 struct cam_ed *device;
2547 * For the sake of compatibility with SCSI-1
2548 * devices that may not understand the identify
2549 * message, we include lun information in the
2550 * second byte of all commands. SCSI-1 specifies
2551 * that luns are a 3 bit value and reserves only 3
2552 * bits for lun information in the CDB. Later
2553 * revisions of the SCSI spec allow for more than 8
2554 * luns, but have deprecated lun information in the
2555 * CDB. So, if the lun won't fit, we must omit.
2557 * Also be aware that during initial probing for devices,
2558 * the inquiry information is unknown but initialized to 0.
2559 * This means that this code will be exercised while probing
2560 * devices with an ANSI revision greater than 2.
2562 device = path->device;
2563 if (device->protocol_version <= SCSI_REV_2
2564 && start_ccb->ccb_h.target_lun < 8
2565 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2566 start_ccb->csio.cdb_io.cdb_bytes[1] |=
2567 start_ccb->ccb_h.target_lun << 5;
2569 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2573 case XPT_CONT_TARGET_IO:
2574 start_ccb->csio.sense_resid = 0;
2575 start_ccb->csio.resid = 0;
2578 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2579 start_ccb->ataio.resid = 0;
2582 case XPT_NVME_ADMIN:
2584 case XPT_MMC_GET_TRAN_SETTINGS:
2585 case XPT_MMC_SET_TRAN_SETTINGS:
2590 struct cam_devq *devq;
2592 devq = path->bus->sim->devq;
2593 mtx_lock(&devq->send_mtx);
2594 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2595 if (xpt_schedule_devq(devq, path->device) != 0)
2597 mtx_unlock(&devq->send_mtx);
2600 case XPT_CALC_GEOMETRY:
2601 /* Filter out garbage */
2602 if (start_ccb->ccg.block_size == 0
2603 || start_ccb->ccg.volume_size == 0) {
2604 start_ccb->ccg.cylinders = 0;
2605 start_ccb->ccg.heads = 0;
2606 start_ccb->ccg.secs_per_track = 0;
2607 start_ccb->ccb_h.status = CAM_REQ_CMP;
2613 union ccb* abort_ccb;
2615 abort_ccb = start_ccb->cab.abort_ccb;
2616 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2617 struct cam_ed *device;
2618 struct cam_devq *devq;
2620 device = abort_ccb->ccb_h.path->device;
2621 devq = device->sim->devq;
2623 mtx_lock(&devq->send_mtx);
2624 if (abort_ccb->ccb_h.pinfo.index > 0) {
2625 cam_ccbq_remove_ccb(&device->ccbq, abort_ccb);
2626 abort_ccb->ccb_h.status =
2627 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2628 xpt_freeze_devq_device(device, 1);
2629 mtx_unlock(&devq->send_mtx);
2630 xpt_done(abort_ccb);
2631 start_ccb->ccb_h.status = CAM_REQ_CMP;
2634 mtx_unlock(&devq->send_mtx);
2636 if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2637 && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2639 * We've caught this ccb en route to
2640 * the SIM. Flag it for abort and the
2641 * SIM will do so just before starting
2642 * real work on the CCB.
2644 abort_ccb->ccb_h.status =
2645 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2646 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2647 start_ccb->ccb_h.status = CAM_REQ_CMP;
2651 if (XPT_FC_IS_QUEUED(abort_ccb)
2652 && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2654 * It's already completed but waiting
2655 * for our SWI to get to it.
2657 start_ccb->ccb_h.status = CAM_UA_ABORT;
2661 * If we weren't able to take care of the abort request
2662 * in the XPT, pass the request down to the SIM for processing.
2666 case XPT_ACCEPT_TARGET_IO:
2668 case XPT_IMMED_NOTIFY:
2669 case XPT_NOTIFY_ACK:
2671 case XPT_IMMEDIATE_NOTIFY:
2672 case XPT_NOTIFY_ACKNOWLEDGE:
2673 case XPT_GET_SIM_KNOB_OLD:
2674 case XPT_GET_SIM_KNOB:
2675 case XPT_SET_SIM_KNOB:
2676 case XPT_GET_TRAN_SETTINGS:
2677 case XPT_SET_TRAN_SETTINGS:
2680 sim = path->bus->sim;
2682 if (mtx && !mtx_owned(mtx))
2687 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2688 ("Calling sim->sim_action(): func=%#x\n", start_ccb->ccb_h.func_code));
2689 (*(sim->sim_action))(sim, start_ccb);
2690 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2691 ("sim->sim_action returned: status=%#x\n", start_ccb->ccb_h.status));
2695 case XPT_PATH_STATS:
2696 start_ccb->cpis.last_reset = path->bus->last_reset;
2697 start_ccb->ccb_h.status = CAM_REQ_CMP;
2704 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2705 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2707 struct ccb_getdev *cgd;
2709 cgd = &start_ccb->cgd;
2710 cgd->protocol = dev->protocol;
2711 cgd->inq_data = dev->inq_data;
2712 cgd->ident_data = dev->ident_data;
2713 cgd->inq_flags = dev->inq_flags;
2714 cgd->ccb_h.status = CAM_REQ_CMP;
2715 cgd->serial_num_len = dev->serial_num_len;
2716 if ((dev->serial_num_len > 0)
2717 && (dev->serial_num != NULL))
2718 bcopy(dev->serial_num, cgd->serial_num,
2719 dev->serial_num_len);
2723 case XPT_GDEV_STATS:
2725 struct ccb_getdevstats *cgds = &start_ccb->cgds;
2726 struct cam_ed *dev = path->device;
2727 struct cam_eb *bus = path->bus;
2728 struct cam_et *tar = path->target;
2729 struct cam_devq *devq = bus->sim->devq;
2731 mtx_lock(&devq->send_mtx);
2732 cgds->dev_openings = dev->ccbq.dev_openings;
2733 cgds->dev_active = dev->ccbq.dev_active;
2734 cgds->allocated = dev->ccbq.allocated;
2735 cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2736 cgds->held = cgds->allocated - cgds->dev_active - cgds->queued;
2737 cgds->last_reset = tar->last_reset;
2738 cgds->maxtags = dev->maxtags;
2739 cgds->mintags = dev->mintags;
2740 if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2741 cgds->last_reset = bus->last_reset;
2742 mtx_unlock(&devq->send_mtx);
2743 cgds->ccb_h.status = CAM_REQ_CMP;
2748 struct cam_periph *nperiph;
2749 struct periph_list *periph_head;
2750 struct ccb_getdevlist *cgdl;
2752 struct cam_ed *device;
2758 * Don't want anyone mucking with our data.
2760 device = path->device;
2761 periph_head = &device->periphs;
2762 cgdl = &start_ccb->cgdl;
2765 * Check and see if the list has changed since the user
2766 * last requested a list member. If so, tell them that the
2767 * list has changed, and therefore they need to start over
2768 * from the beginning.
2770 if ((cgdl->index != 0) &&
2771 (cgdl->generation != device->generation)) {
2772 cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2777 * Traverse the list of peripherals and attempt to find
2778 * the requested peripheral.
2780 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2781 (nperiph != NULL) && (i <= cgdl->index);
2782 nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2783 if (i == cgdl->index) {
2784 strlcpy(cgdl->periph_name,
2785 nperiph->periph_name,
2786 sizeof(cgdl->periph_name));
2787 cgdl->unit_number = nperiph->unit_number;
2792 cgdl->status = CAM_GDEVLIST_ERROR;
2796 if (nperiph == NULL)
2797 cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2799 cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2802 cgdl->generation = device->generation;
2804 cgdl->ccb_h.status = CAM_REQ_CMP;
2809 dev_pos_type position_type;
2810 struct ccb_dev_match *cdm;
2812 cdm = &start_ccb->cdm;
2815 * There are two ways of getting at information in the EDT.
2816 * The first way is via the primary EDT tree. It starts
2817 * with a list of buses, then a list of targets on a bus,
2818 * then devices/luns on a target, and then peripherals on a
2819 * device/lun. The "other" way is by the peripheral driver
2820 * lists. The peripheral driver lists are organized by
2821 * peripheral driver. (obviously) So it makes sense to
2822 * use the peripheral driver list if the user is looking
2823 * for something like "da1", or all "da" devices. If the
2824 * user is looking for something on a particular bus/target
2825 * or lun, it's generally better to go through the EDT tree.
2828 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2829 position_type = cdm->pos.position_type;
2833 position_type = CAM_DEV_POS_NONE;
2835 for (i = 0; i < cdm->num_patterns; i++) {
2836 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2837 ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2838 position_type = CAM_DEV_POS_EDT;
2843 if (cdm->num_patterns == 0)
2844 position_type = CAM_DEV_POS_EDT;
2845 else if (position_type == CAM_DEV_POS_NONE)
2846 position_type = CAM_DEV_POS_PDRV;
2849 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2850 case CAM_DEV_POS_EDT:
2853 case CAM_DEV_POS_PDRV:
2854 xptperiphlistmatch(cdm);
2857 cdm->status = CAM_DEV_MATCH_ERROR;
2861 if (cdm->status == CAM_DEV_MATCH_ERROR)
2862 start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2864 start_ccb->ccb_h.status = CAM_REQ_CMP;
2870 struct ccb_setasync *csa;
2871 struct async_node *cur_entry;
2872 struct async_list *async_head;
2875 csa = &start_ccb->csa;
2876 added = csa->event_enable;
2877 async_head = &path->device->asyncs;
2880 * If there is already an entry for us, simply
2883 cur_entry = SLIST_FIRST(async_head);
2884 while (cur_entry != NULL) {
2885 if ((cur_entry->callback_arg == csa->callback_arg)
2886 && (cur_entry->callback == csa->callback))
2888 cur_entry = SLIST_NEXT(cur_entry, links);
2891 if (cur_entry != NULL) {
2893 * If the request has no flags set,
2896 added &= ~cur_entry->event_enable;
2897 if (csa->event_enable == 0) {
2898 SLIST_REMOVE(async_head, cur_entry,
2900 xpt_release_device(path->device);
2901 free(cur_entry, M_CAMXPT);
2903 cur_entry->event_enable = csa->event_enable;
2905 csa->event_enable = added;
2907 cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
2909 if (cur_entry == NULL) {
2910 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
2913 cur_entry->event_enable = csa->event_enable;
2914 cur_entry->event_lock = (path->bus->sim->mtx &&
2915 mtx_owned(path->bus->sim->mtx)) ? 1 : 0;
2916 cur_entry->callback_arg = csa->callback_arg;
2917 cur_entry->callback = csa->callback;
2918 SLIST_INSERT_HEAD(async_head, cur_entry, links);
2919 xpt_acquire_device(path->device);
2921 start_ccb->ccb_h.status = CAM_REQ_CMP;
2926 struct ccb_relsim *crs;
2929 crs = &start_ccb->crs;
2932 crs->ccb_h.status = CAM_DEV_NOT_THERE;
2936 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
2937 /* Don't ever go below one opening */
2938 if (crs->openings > 0) {
2939 xpt_dev_ccbq_resize(path, crs->openings);
2942 "number of openings is now %d\n",
2948 mtx_lock(&dev->sim->devq->send_mtx);
2949 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
2950 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
2952 * Just extend the old timeout and decrement
2953 * the freeze count so that a single timeout
2954 * is sufficient for releasing the queue.
2956 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2957 callout_stop(&dev->callout);
2959 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2962 callout_reset_sbt(&dev->callout,
2963 SBT_1MS * crs->release_timeout, SBT_1MS,
2964 xpt_release_devq_timeout, dev, 0);
2966 dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
2969 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
2970 if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
2972 * Decrement the freeze count so that a single
2973 * completion is still sufficient to unfreeze
2976 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2978 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
2979 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2983 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
2984 if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
2985 || (dev->ccbq.dev_active == 0)) {
2986 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2988 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
2989 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2992 mtx_unlock(&dev->sim->devq->send_mtx);
2994 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
2995 xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
2996 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
2997 start_ccb->ccb_h.status = CAM_REQ_CMP;
3001 struct cam_path *oldpath;
3003 /* Check that all request bits are supported. */
3004 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
3005 start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
3009 cam_dflags = CAM_DEBUG_NONE;
3010 if (cam_dpath != NULL) {
3011 oldpath = cam_dpath;
3013 xpt_free_path(oldpath);
3015 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
3016 if (xpt_create_path(&cam_dpath, NULL,
3017 start_ccb->ccb_h.path_id,
3018 start_ccb->ccb_h.target_id,
3019 start_ccb->ccb_h.target_lun) !=
3021 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3023 cam_dflags = start_ccb->cdbg.flags;
3024 start_ccb->ccb_h.status = CAM_REQ_CMP;
3025 xpt_print(cam_dpath, "debugging flags now %x\n",
3029 start_ccb->ccb_h.status = CAM_REQ_CMP;
3033 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
3034 xpt_freeze_devq(path, 1);
3035 start_ccb->ccb_h.status = CAM_REQ_CMP;
3037 case XPT_REPROBE_LUN:
3038 xpt_async(AC_INQ_CHANGED, path, NULL);
3039 start_ccb->ccb_h.status = CAM_REQ_CMP;
3040 xpt_done(start_ccb);
3044 * Queue the async operation so it can be run from a sleepable
3047 start_ccb->ccb_h.status = CAM_REQ_CMP;
3048 mtx_lock(&cam_async.cam_doneq_mtx);
3049 STAILQ_INSERT_TAIL(&cam_async.cam_doneq, &start_ccb->ccb_h, sim_links.stqe);
3050 start_ccb->ccb_h.pinfo.index = CAM_ASYNC_INDEX;
3051 mtx_unlock(&cam_async.cam_doneq_mtx);
3052 wakeup(&cam_async.cam_doneq);
3059 xpt_print(start_ccb->ccb_h.path,
3060 "%s: CCB type %#x %s not supported\n", __func__,
3061 start_ccb->ccb_h.func_code,
3062 xpt_action_name(start_ccb->ccb_h.func_code));
3063 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
3064 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
3065 xpt_done(start_ccb);
3069 CAM_DEBUG(path, CAM_DEBUG_TRACE,
3070 ("xpt_action_default: func= %#x %s status %#x\n",
3071 start_ccb->ccb_h.func_code,
3072 xpt_action_name(start_ccb->ccb_h.func_code),
3073 start_ccb->ccb_h.status));
3077 * Call the sim poll routine to allow the sim to complete
3078 * any inflight requests, then call camisr_runqueue to
3079 * complete any CCB that the polling completed.
3082 xpt_sim_poll(struct cam_sim *sim)
3086 KASSERT(cam_sim_pollable(sim), ("%s: non-pollable sim", __func__));
3090 (*(sim->sim_poll))(sim);
3097 xpt_poll_setup(union ccb *start_ccb)
3100 struct cam_sim *sim;
3101 struct cam_devq *devq;
3104 timeout = start_ccb->ccb_h.timeout * 10;
3105 sim = start_ccb->ccb_h.path->bus->sim;
3107 dev = start_ccb->ccb_h.path->device;
3109 KASSERT(cam_sim_pollable(sim), ("%s: non-pollable sim", __func__));
3112 * Steal an opening so that no other queued requests
3113 * can get it before us while we simulate interrupts.
3115 mtx_lock(&devq->send_mtx);
3116 dev->ccbq.dev_openings--;
3117 while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3119 mtx_unlock(&devq->send_mtx);
3122 mtx_lock(&devq->send_mtx);
3124 dev->ccbq.dev_openings++;
3125 mtx_unlock(&devq->send_mtx);
3131 xpt_pollwait(union ccb *start_ccb, uint32_t timeout)
3134 KASSERT(cam_sim_pollable(start_ccb->ccb_h.path->bus->sim),
3135 ("%s: non-pollable sim", __func__));
3136 while (--timeout > 0) {
3137 xpt_sim_poll(start_ccb->ccb_h.path->bus->sim);
3138 if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
3146 * XXX Is it worth adding a sim_timeout entry
3147 * point so we can attempt recovery? If
3148 * this is only used for dumps, I don't think
3151 start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3156 * Schedule a peripheral driver to receive a ccb when its
3157 * target device has space for more transactions.
3160 xpt_schedule(struct cam_periph *periph, uint32_t new_priority)
3163 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3164 cam_periph_assert(periph, MA_OWNED);
3165 if (new_priority < periph->scheduled_priority) {
3166 periph->scheduled_priority = new_priority;
3167 xpt_run_allocq(periph, 0);
3172 * Schedule a device to run on a given queue.
3173 * If the device was inserted as a new entry on the queue,
3174 * return 1 meaning the device queue should be run. If we
3175 * were already queued, implying someone else has already
3176 * started the queue, return 0 so the caller doesn't attempt
3180 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3181 uint32_t new_priority)
3184 uint32_t old_priority;
3186 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3188 old_priority = pinfo->priority;
3191 * Are we already queued?
3193 if (pinfo->index != CAM_UNQUEUED_INDEX) {
3194 /* Simply reorder based on new priority */
3195 if (new_priority < old_priority) {
3196 camq_change_priority(queue, pinfo->index,
3198 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3199 ("changed priority to %d\n",
3205 /* New entry on the queue */
3206 if (new_priority < old_priority)
3207 pinfo->priority = new_priority;
3209 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3210 ("Inserting onto queue\n"));
3211 pinfo->generation = ++queue->generation;
3212 camq_insert(queue, pinfo);
3219 xpt_run_allocq_task(void *context, int pending)
3221 struct cam_periph *periph = context;
3223 cam_periph_lock(periph);
3224 periph->flags &= ~CAM_PERIPH_RUN_TASK;
3225 xpt_run_allocq(periph, 1);
3226 cam_periph_unlock(periph);
3227 cam_periph_release(periph);
3231 xpt_run_allocq(struct cam_periph *periph, int sleep)
3233 struct cam_ed *device;
3237 cam_periph_assert(periph, MA_OWNED);
3238 if (periph->periph_allocating)
3240 cam_periph_doacquire(periph);
3241 periph->periph_allocating = 1;
3242 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3243 device = periph->path->device;
3246 while ((prio = min(periph->scheduled_priority,
3247 periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3248 (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3249 device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3251 (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3253 ccb = xpt_get_ccb(periph);
3256 if (periph->flags & CAM_PERIPH_RUN_TASK)
3258 cam_periph_doacquire(periph);
3259 periph->flags |= CAM_PERIPH_RUN_TASK;
3260 taskqueue_enqueue(xsoftc.xpt_taskq,
3261 &periph->periph_run_task);
3264 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3265 if (prio == periph->immediate_priority) {
3266 periph->immediate_priority = CAM_PRIORITY_NONE;
3267 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3268 ("waking cam_periph_getccb()\n"));
3269 SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3271 wakeup(&periph->ccb_list);
3273 periph->scheduled_priority = CAM_PRIORITY_NONE;
3274 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3275 ("calling periph_start()\n"));
3276 periph->periph_start(periph, ccb);
3281 xpt_release_ccb(ccb);
3282 periph->periph_allocating = 0;
3283 cam_periph_release_locked(periph);
3287 xpt_run_devq(struct cam_devq *devq)
3291 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3293 devq->send_queue.qfrozen_cnt++;
3294 while ((devq->send_queue.entries > 0)
3295 && (devq->send_openings > 0)
3296 && (devq->send_queue.qfrozen_cnt <= 1)) {
3297 struct cam_ed *device;
3298 union ccb *work_ccb;
3299 struct cam_sim *sim;
3300 struct xpt_proto *proto;
3302 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3304 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3305 ("running device %p\n", device));
3307 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3308 if (work_ccb == NULL) {
3309 printf("device on run queue with no ccbs???\n");
3313 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3314 mtx_lock(&xsoftc.xpt_highpower_lock);
3315 if (xsoftc.num_highpower <= 0) {
3317 * We got a high power command, but we
3318 * don't have any available slots. Freeze
3319 * the device queue until we have a slot
3322 xpt_freeze_devq_device(device, 1);
3323 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3326 mtx_unlock(&xsoftc.xpt_highpower_lock);
3330 * Consume a high power slot while
3333 xsoftc.num_highpower--;
3335 mtx_unlock(&xsoftc.xpt_highpower_lock);
3337 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3338 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3339 devq->send_openings--;
3340 devq->send_active++;
3341 xpt_schedule_devq(devq, device);
3342 mtx_unlock(&devq->send_mtx);
3344 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3346 * The client wants to freeze the queue
3347 * after this CCB is sent.
3349 xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3352 /* In Target mode, the peripheral driver knows best... */
3353 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3354 if ((device->inq_flags & SID_CmdQue) != 0
3355 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3356 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3359 * Clear this in case of a retried CCB that
3360 * failed due to a rejected tag.
3362 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3365 KASSERT(device == work_ccb->ccb_h.path->device,
3366 ("device (%p) / path->device (%p) mismatch",
3367 device, work_ccb->ccb_h.path->device));
3368 proto = xpt_proto_find(device->protocol);
3369 if (proto && proto->ops->debug_out)
3370 proto->ops->debug_out(work_ccb);
3373 * Device queues can be shared among multiple SIM instances
3374 * that reside on different buses. Use the SIM from the
3375 * queued device, rather than the one from the calling bus.
3379 if (mtx && !mtx_owned(mtx))
3383 work_ccb->ccb_h.qos.periph_data = cam_iosched_now();
3384 (*(sim->sim_action))(sim, work_ccb);
3387 mtx_lock(&devq->send_mtx);
3389 devq->send_queue.qfrozen_cnt--;
3393 * This function merges stuff from the src ccb into the dst ccb, while keeping
3394 * important fields in the dst ccb constant.
3397 xpt_merge_ccb(union ccb *dst_ccb, union ccb *src_ccb)
3401 * Pull fields that are valid for peripheral drivers to set
3402 * into the dst CCB along with the CCB "payload".
3404 dst_ccb->ccb_h.retry_count = src_ccb->ccb_h.retry_count;
3405 dst_ccb->ccb_h.func_code = src_ccb->ccb_h.func_code;
3406 dst_ccb->ccb_h.timeout = src_ccb->ccb_h.timeout;
3407 dst_ccb->ccb_h.flags = src_ccb->ccb_h.flags;
3408 bcopy(&(&src_ccb->ccb_h)[1], &(&dst_ccb->ccb_h)[1],
3409 sizeof(union ccb) - sizeof(struct ccb_hdr));
3413 xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path,
3414 uint32_t priority, uint32_t flags)
3417 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3418 ccb_h->pinfo.priority = priority;
3420 ccb_h->path_id = path->bus->path_id;
3422 ccb_h->target_id = path->target->target_id;
3424 ccb_h->target_id = CAM_TARGET_WILDCARD;
3426 ccb_h->target_lun = path->device->lun_id;
3427 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3429 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3431 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3432 ccb_h->flags = flags;
3437 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, uint32_t priority)
3439 xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0);
3442 /* Path manipulation functions */
3444 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3445 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3447 struct cam_path *path;
3450 path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3453 status = CAM_RESRC_UNAVAIL;
3456 status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3457 if (status != CAM_REQ_CMP) {
3458 free(path, M_CAMPATH);
3461 *new_path_ptr = path;
3466 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3467 struct cam_periph *periph, path_id_t path_id,
3468 target_id_t target_id, lun_id_t lun_id)
3471 return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3476 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3477 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3480 struct cam_et *target;
3481 struct cam_ed *device;
3484 status = CAM_REQ_CMP; /* Completed without error */
3485 target = NULL; /* Wildcarded */
3486 device = NULL; /* Wildcarded */
3489 * We will potentially modify the EDT, so block interrupts
3490 * that may attempt to create cam paths.
3492 bus = xpt_find_bus(path_id);
3494 status = CAM_PATH_INVALID;
3497 mtx_lock(&bus->eb_mtx);
3498 target = xpt_find_target(bus, target_id);
3499 if (target == NULL) {
3501 struct cam_et *new_target;
3503 new_target = xpt_alloc_target(bus, target_id);
3504 if (new_target == NULL) {
3505 status = CAM_RESRC_UNAVAIL;
3507 target = new_target;
3511 if (target != NULL) {
3512 device = xpt_find_device(target, lun_id);
3513 if (device == NULL) {
3515 struct cam_ed *new_device;
3518 (*(bus->xport->ops->alloc_device))(bus,
3521 if (new_device == NULL) {
3522 status = CAM_RESRC_UNAVAIL;
3524 device = new_device;
3528 mtx_unlock(&bus->eb_mtx);
3532 * Only touch the user's data if we are successful.
3534 if (status == CAM_REQ_CMP) {
3535 new_path->periph = perph;
3536 new_path->bus = bus;
3537 new_path->target = target;
3538 new_path->device = device;
3539 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3542 xpt_release_device(device);
3544 xpt_release_target(target);
3546 xpt_release_bus(bus);
3552 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3554 struct cam_path *new_path;
3556 new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3557 if (new_path == NULL)
3560 if (path->bus != NULL)
3561 xpt_acquire_bus(path->bus);
3562 if (path->target != NULL)
3563 xpt_acquire_target(path->target);
3564 if (path->device != NULL)
3565 xpt_acquire_device(path->device);
3566 *new_path_ptr = new_path;
3571 xpt_release_path(struct cam_path *path)
3573 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3574 if (path->device != NULL) {
3575 xpt_release_device(path->device);
3576 path->device = NULL;
3578 if (path->target != NULL) {
3579 xpt_release_target(path->target);
3580 path->target = NULL;
3582 if (path->bus != NULL) {
3583 xpt_release_bus(path->bus);
3589 xpt_free_path(struct cam_path *path)
3592 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3593 xpt_release_path(path);
3594 free(path, M_CAMPATH);
3598 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3599 uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3605 *bus_ref = path->bus->refcount;
3611 *periph_ref = path->periph->refcount;
3618 *target_ref = path->target->refcount;
3624 *device_ref = path->device->refcount;
3631 * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3632 * in path1, 2 for match with wildcards in path2.
3635 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3639 if (path1->bus != path2->bus) {
3640 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3642 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3647 if (path1->target != path2->target) {
3648 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3651 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3656 if (path1->device != path2->device) {
3657 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3660 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3669 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3673 if (path->bus != dev->target->bus) {
3674 if (path->bus->path_id == CAM_BUS_WILDCARD)
3676 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3681 if (path->target != dev->target) {
3682 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3685 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3690 if (path->device != dev) {
3691 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3694 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3703 xpt_print_path(struct cam_path *path)
3706 char buffer[XPT_PRINT_LEN];
3708 sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
3709 xpt_path_sbuf(path, &sb);
3711 printf("%s", sbuf_data(&sb));
3716 xpt_print_device(struct cam_ed *device)
3720 printf("(nopath): ");
3722 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3723 device->sim->unit_number,
3724 device->sim->bus_id,
3725 device->target->target_id,
3726 (uintmax_t)device->lun_id);
3731 xpt_print(struct cam_path *path, const char *fmt, ...)
3735 char buffer[XPT_PRINT_LEN];
3737 sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN);
3739 xpt_path_sbuf(path, &sb);
3741 sbuf_vprintf(&sb, fmt, ap);
3745 printf("%s", sbuf_data(&sb));
3750 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3755 sbuf_new(&sb, str, str_len, 0);
3756 len = xpt_path_sbuf(path, &sb);
3762 xpt_path_sbuf(struct cam_path *path, struct sbuf *sb)
3766 sbuf_printf(sb, "(nopath): ");
3768 if (path->periph != NULL)
3769 sbuf_printf(sb, "(%s%d:", path->periph->periph_name,
3770 path->periph->unit_number);
3772 sbuf_printf(sb, "(noperiph:");
3774 if (path->bus != NULL)
3775 sbuf_printf(sb, "%s%d:%d:", path->bus->sim->sim_name,
3776 path->bus->sim->unit_number,
3777 path->bus->sim->bus_id);
3779 sbuf_printf(sb, "nobus:");
3781 if (path->target != NULL)
3782 sbuf_printf(sb, "%d:", path->target->target_id);
3784 sbuf_printf(sb, "X:");
3786 if (path->device != NULL)
3787 sbuf_printf(sb, "%jx): ",
3788 (uintmax_t)path->device->lun_id);
3790 sbuf_printf(sb, "X): ");
3793 return(sbuf_len(sb));
3797 xpt_path_path_id(struct cam_path *path)
3799 return(path->bus->path_id);
3803 xpt_path_target_id(struct cam_path *path)
3805 if (path->target != NULL)
3806 return (path->target->target_id);
3808 return (CAM_TARGET_WILDCARD);
3812 xpt_path_lun_id(struct cam_path *path)
3814 if (path->device != NULL)
3815 return (path->device->lun_id);
3817 return (CAM_LUN_WILDCARD);
3821 xpt_path_sim(struct cam_path *path)
3824 return (path->bus->sim);
3828 xpt_path_periph(struct cam_path *path)
3831 return (path->periph);
3835 * Release a CAM control block for the caller. Remit the cost of the structure
3836 * to the device referenced by the path. If the this device had no 'credits'
3837 * and peripheral drivers have registered async callbacks for this notification
3841 xpt_release_ccb(union ccb *free_ccb)
3843 struct cam_ed *device;
3844 struct cam_periph *periph;
3846 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
3847 xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
3848 device = free_ccb->ccb_h.path->device;
3849 periph = free_ccb->ccb_h.path->periph;
3851 xpt_free_ccb(free_ccb);
3852 periph->periph_allocated--;
3853 cam_ccbq_release_opening(&device->ccbq);
3854 xpt_run_allocq(periph, 0);
3857 /* Functions accessed by SIM drivers */
3859 static struct xpt_xport_ops xport_default_ops = {
3860 .alloc_device = xpt_alloc_device_default,
3861 .action = xpt_action_default,
3862 .async = xpt_dev_async_default,
3864 static struct xpt_xport xport_default = {
3865 .xport = XPORT_UNKNOWN,
3867 .ops = &xport_default_ops,
3870 CAM_XPT_XPORT(xport_default);
3873 * A sim structure, listing the SIM entry points and instance
3874 * identification info is passed to xpt_bus_register to hook the SIM
3875 * into the CAM framework. xpt_bus_register creates a cam_eb entry
3876 * for this new bus and places it in the array of buses and assigns
3877 * it a path_id. The path_id may be influenced by "hard wiring"
3878 * information specified by the user. Once interrupt services are
3879 * available, the bus will be probed.
3882 xpt_bus_register(struct cam_sim *sim, device_t parent, uint32_t bus)
3884 struct cam_eb *new_bus;
3885 struct cam_eb *old_bus;
3886 struct ccb_pathinq cpi;
3887 struct cam_path *path;
3891 new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
3892 M_CAMXPT, M_NOWAIT|M_ZERO);
3893 if (new_bus == NULL) {
3894 /* Couldn't satisfy request */
3898 mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
3899 TAILQ_INIT(&new_bus->et_entries);
3902 timevalclear(&new_bus->last_reset);
3904 new_bus->refcount = 1; /* Held until a bus_deregister event */
3905 new_bus->generation = 0;
3906 new_bus->parent_dev = parent;
3909 sim->path_id = new_bus->path_id =
3910 xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
3911 old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3912 while (old_bus != NULL
3913 && old_bus->path_id < new_bus->path_id)
3914 old_bus = TAILQ_NEXT(old_bus, links);
3915 if (old_bus != NULL)
3916 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
3918 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
3919 xsoftc.bus_generation++;
3923 * Set a default transport so that a PATH_INQ can be issued to
3924 * the SIM. This will then allow for probing and attaching of
3925 * a more appropriate transport.
3927 new_bus->xport = &xport_default;
3929 status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
3930 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3931 if (status != CAM_REQ_CMP) {
3932 xpt_release_bus(new_bus);
3936 xpt_path_inq(&cpi, path);
3939 * Use the results of PATH_INQ to pick a transport. Note that
3940 * the xpt bus (which uses XPORT_UNSPECIFIED) always uses
3941 * xport_default instead of a transport from
3944 if (cam_ccb_success((union ccb *)&cpi) &&
3945 cpi.transport != XPORT_UNSPECIFIED) {
3946 struct xpt_xport **xpt;
3948 SET_FOREACH(xpt, cam_xpt_xport_set) {
3949 if ((*xpt)->xport == cpi.transport) {
3950 new_bus->xport = *xpt;
3954 if (new_bus->xport == &xport_default) {
3956 "No transport found for %d\n", cpi.transport);
3957 xpt_release_bus(new_bus);
3958 xpt_free_path(path);
3963 /* Notify interested parties */
3964 if (sim->path_id != CAM_XPT_PATH_ID) {
3965 xpt_async(AC_PATH_REGISTERED, path, &cpi);
3966 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
3967 union ccb *scan_ccb;
3969 /* Initiate bus rescan. */
3970 scan_ccb = xpt_alloc_ccb_nowait();
3971 if (scan_ccb != NULL) {
3972 scan_ccb->ccb_h.path = path;
3973 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
3974 scan_ccb->crcn.flags = 0;
3975 xpt_rescan(scan_ccb);
3978 "Can't allocate CCB to scan bus\n");
3979 xpt_free_path(path);
3982 xpt_free_path(path);
3984 xpt_free_path(path);
3985 return (CAM_SUCCESS);
3989 xpt_bus_deregister(path_id_t pathid)
3991 struct cam_path bus_path;
3994 status = xpt_compile_path(&bus_path, NULL, pathid,
3995 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3996 if (status != CAM_REQ_CMP)
3999 xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
4000 xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
4002 /* Release the reference count held while registered. */
4003 xpt_release_bus(bus_path.bus);
4004 xpt_release_path(&bus_path);
4006 return (CAM_SUCCESS);
4010 xptnextfreepathid(void)
4016 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4018 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4020 /* Find an unoccupied pathid */
4021 while (bus != NULL && bus->path_id <= pathid) {
4022 if (bus->path_id == pathid)
4024 bus = TAILQ_NEXT(bus, links);
4028 * Ensure that this pathid is not reserved for
4029 * a bus that may be registered in the future.
4031 if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
4033 /* Start the search over */
4040 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
4047 pathid = CAM_XPT_PATH_ID;
4048 snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
4049 if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
4052 while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
4053 if (strcmp(dname, "scbus")) {
4054 /* Avoid a bit of foot shooting. */
4057 if (dunit < 0) /* unwired?! */
4059 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
4060 if (sim_bus == val) {
4064 } else if (sim_bus == 0) {
4065 /* Unspecified matches bus 0 */
4069 printf("Ambiguous scbus configuration for %s%d "
4070 "bus %d, cannot wire down. The kernel "
4071 "config entry for scbus%d should "
4072 "specify a controller bus.\n"
4073 "Scbus will be assigned dynamically.\n",
4074 sim_name, sim_unit, sim_bus, dunit);
4079 if (pathid == CAM_XPT_PATH_ID)
4080 pathid = xptnextfreepathid();
4085 xpt_async_string(uint32_t async_code)
4088 switch (async_code) {
4089 case AC_BUS_RESET: return ("AC_BUS_RESET");
4090 case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4091 case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4092 case AC_SENT_BDR: return ("AC_SENT_BDR");
4093 case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4094 case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4095 case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4096 case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4097 case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4098 case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4099 case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4100 case AC_CONTRACT: return ("AC_CONTRACT");
4101 case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4102 case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4104 return ("AC_UNKNOWN");
4108 xpt_async_size(uint32_t async_code)
4111 switch (async_code) {
4112 case AC_BUS_RESET: return (0);
4113 case AC_UNSOL_RESEL: return (0);
4114 case AC_SCSI_AEN: return (0);
4115 case AC_SENT_BDR: return (0);
4116 case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4117 case AC_PATH_DEREGISTERED: return (0);
4118 case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4119 case AC_LOST_DEVICE: return (0);
4120 case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4121 case AC_INQ_CHANGED: return (0);
4122 case AC_GETDEV_CHANGED: return (0);
4123 case AC_CONTRACT: return (sizeof(struct ac_contract));
4124 case AC_ADVINFO_CHANGED: return (-1);
4125 case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4131 xpt_async_process_dev(struct cam_ed *device, void *arg)
4133 union ccb *ccb = arg;
4134 struct cam_path *path = ccb->ccb_h.path;
4135 void *async_arg = ccb->casync.async_arg_ptr;
4136 uint32_t async_code = ccb->casync.async_code;
4139 if (path->device != device
4140 && path->device->lun_id != CAM_LUN_WILDCARD
4141 && device->lun_id != CAM_LUN_WILDCARD)
4145 * The async callback could free the device.
4146 * If it is a broadcast async, it doesn't hold
4147 * device reference, so take our own reference.
4149 xpt_acquire_device(device);
4152 * If async for specific device is to be delivered to
4153 * the wildcard client, take the specific device lock.
4154 * XXX: We may need a way for client to specify it.
4156 if ((device->lun_id == CAM_LUN_WILDCARD &&
4157 path->device->lun_id != CAM_LUN_WILDCARD) ||
4158 (device->target->target_id == CAM_TARGET_WILDCARD &&
4159 path->target->target_id != CAM_TARGET_WILDCARD) ||
4160 (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4161 path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4162 mtx_unlock(&device->device_mtx);
4163 xpt_path_lock(path);
4168 (*(device->target->bus->xport->ops->async))(async_code,
4169 device->target->bus, device->target, device, async_arg);
4170 xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4173 xpt_path_unlock(path);
4174 mtx_lock(&device->device_mtx);
4176 xpt_release_device(device);
4181 xpt_async_process_tgt(struct cam_et *target, void *arg)
4183 union ccb *ccb = arg;
4184 struct cam_path *path = ccb->ccb_h.path;
4186 if (path->target != target
4187 && path->target->target_id != CAM_TARGET_WILDCARD
4188 && target->target_id != CAM_TARGET_WILDCARD)
4191 if (ccb->casync.async_code == AC_SENT_BDR) {
4192 /* Update our notion of when the last reset occurred */
4193 microtime(&target->last_reset);
4196 return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4200 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4203 struct cam_path *path;
4205 uint32_t async_code;
4207 path = ccb->ccb_h.path;
4208 async_code = ccb->casync.async_code;
4209 async_arg = ccb->casync.async_arg_ptr;
4210 CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4211 ("xpt_async(%s)\n", xpt_async_string(async_code)));
4214 if (async_code == AC_BUS_RESET) {
4215 /* Update our notion of when the last reset occurred */
4216 microtime(&bus->last_reset);
4219 xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4222 * If this wasn't a fully wildcarded async, tell all
4223 * clients that want all async events.
4225 if (bus != xpt_periph->path->bus) {
4226 xpt_path_lock(xpt_periph->path);
4227 xpt_async_process_dev(xpt_periph->path->device, ccb);
4228 xpt_path_unlock(xpt_periph->path);
4231 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4232 xpt_release_devq(path, 1, TRUE);
4234 xpt_release_simq(path->bus->sim, TRUE);
4235 if (ccb->casync.async_arg_size > 0)
4236 free(async_arg, M_CAMXPT);
4237 xpt_free_path(path);
4242 xpt_async_bcast(struct async_list *async_head,
4243 uint32_t async_code,
4244 struct cam_path *path, void *async_arg)
4246 struct async_node *cur_entry;
4249 cur_entry = SLIST_FIRST(async_head);
4250 while (cur_entry != NULL) {
4251 struct async_node *next_entry;
4253 * Grab the next list entry before we call the current
4254 * entry's callback. This is because the callback function
4255 * can delete its async callback entry.
4257 next_entry = SLIST_NEXT(cur_entry, links);
4258 if ((cur_entry->event_enable & async_code) != 0) {
4259 mtx = cur_entry->event_lock ?
4260 path->device->sim->mtx : NULL;
4263 cur_entry->callback(cur_entry->callback_arg,
4269 cur_entry = next_entry;
4274 xpt_async(uint32_t async_code, struct cam_path *path, void *async_arg)
4279 ccb = xpt_alloc_ccb_nowait();
4281 xpt_print(path, "Can't allocate CCB to send %s\n",
4282 xpt_async_string(async_code));
4286 if (xpt_clone_path(&ccb->ccb_h.path, path) != 0) {
4287 xpt_print(path, "Can't allocate path to send %s\n",
4288 xpt_async_string(async_code));
4292 ccb->ccb_h.path->periph = NULL;
4293 ccb->ccb_h.func_code = XPT_ASYNC;
4294 ccb->ccb_h.cbfcnp = xpt_async_process;
4295 ccb->ccb_h.flags |= CAM_UNLOCKED;
4296 ccb->casync.async_code = async_code;
4297 ccb->casync.async_arg_size = 0;
4298 size = xpt_async_size(async_code);
4299 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
4300 ("xpt_async: func %#x %s aync_code %d %s\n",
4301 ccb->ccb_h.func_code,
4302 xpt_action_name(ccb->ccb_h.func_code),
4304 xpt_async_string(async_code)));
4305 if (size > 0 && async_arg != NULL) {
4306 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4307 if (ccb->casync.async_arg_ptr == NULL) {
4308 xpt_print(path, "Can't allocate argument to send %s\n",
4309 xpt_async_string(async_code));
4310 xpt_free_path(ccb->ccb_h.path);
4314 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4315 ccb->casync.async_arg_size = size;
4316 } else if (size < 0) {
4317 ccb->casync.async_arg_ptr = async_arg;
4318 ccb->casync.async_arg_size = size;
4320 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4321 xpt_freeze_devq(path, 1);
4323 xpt_freeze_simq(path->bus->sim, 1);
4328 xpt_dev_async_default(uint32_t async_code, struct cam_eb *bus,
4329 struct cam_et *target, struct cam_ed *device,
4334 * We only need to handle events for real devices.
4336 if (target->target_id == CAM_TARGET_WILDCARD
4337 || device->lun_id == CAM_LUN_WILDCARD)
4340 printf("%s called\n", __func__);
4344 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4346 struct cam_devq *devq;
4349 devq = dev->sim->devq;
4350 mtx_assert(&devq->send_mtx, MA_OWNED);
4351 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4352 ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4353 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4354 freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4355 /* Remove frozen device from sendq. */
4356 if (device_is_queued(dev))
4357 camq_remove(&devq->send_queue, dev->devq_entry.index);
4362 xpt_freeze_devq(struct cam_path *path, u_int count)
4364 struct cam_ed *dev = path->device;
4365 struct cam_devq *devq;
4368 devq = dev->sim->devq;
4369 mtx_lock(&devq->send_mtx);
4370 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4371 freeze = xpt_freeze_devq_device(dev, count);
4372 mtx_unlock(&devq->send_mtx);
4377 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4379 struct cam_devq *devq;
4383 mtx_lock(&devq->send_mtx);
4384 freeze = (devq->send_queue.qfrozen_cnt += count);
4385 mtx_unlock(&devq->send_mtx);
4390 xpt_release_devq_timeout(void *arg)
4393 struct cam_devq *devq;
4395 dev = (struct cam_ed *)arg;
4396 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4397 devq = dev->sim->devq;
4398 mtx_assert(&devq->send_mtx, MA_OWNED);
4399 if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4404 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4407 struct cam_devq *devq;
4409 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4412 devq = dev->sim->devq;
4413 mtx_lock(&devq->send_mtx);
4414 if (xpt_release_devq_device(dev, count, run_queue))
4415 xpt_run_devq(dev->sim->devq);
4416 mtx_unlock(&devq->send_mtx);
4420 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4423 mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4424 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4425 ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4426 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4427 if (count > dev->ccbq.queue.qfrozen_cnt) {
4429 printf("xpt_release_devq(): requested %u > present %u\n",
4430 count, dev->ccbq.queue.qfrozen_cnt);
4432 count = dev->ccbq.queue.qfrozen_cnt;
4434 dev->ccbq.queue.qfrozen_cnt -= count;
4435 if (dev->ccbq.queue.qfrozen_cnt == 0) {
4437 * No longer need to wait for a successful
4438 * command completion.
4440 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4442 * Remove any timeouts that might be scheduled
4443 * to release this queue.
4445 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4446 callout_stop(&dev->callout);
4447 dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4450 * Now that we are unfrozen schedule the
4451 * device so any pending transactions are
4454 xpt_schedule_devq(dev->sim->devq, dev);
4461 xpt_release_simq(struct cam_sim *sim, int run_queue)
4463 struct cam_devq *devq;
4466 mtx_lock(&devq->send_mtx);
4467 if (devq->send_queue.qfrozen_cnt <= 0) {
4469 printf("xpt_release_simq: requested 1 > present %u\n",
4470 devq->send_queue.qfrozen_cnt);
4473 devq->send_queue.qfrozen_cnt--;
4474 if (devq->send_queue.qfrozen_cnt == 0) {
4477 * Now that we are unfrozen run the send queue.
4479 xpt_run_devq(sim->devq);
4482 mtx_unlock(&devq->send_mtx);
4486 xpt_done(union ccb *done_ccb)
4488 struct cam_doneq *queue;
4491 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
4492 if (done_ccb->ccb_h.func_code == XPT_SCSI_IO &&
4493 done_ccb->csio.bio != NULL)
4494 biotrack(done_ccb->csio.bio, __func__);
4497 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
4498 ("xpt_done: func= %#x %s status %#x\n",
4499 done_ccb->ccb_h.func_code,
4500 xpt_action_name(done_ccb->ccb_h.func_code),
4501 done_ccb->ccb_h.status));
4502 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4505 /* Store the time the ccb was in the sim */
4506 done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
4507 done_ccb->ccb_h.status |= CAM_QOS_VALID;
4508 hash = (u_int)(done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4509 done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4510 queue = &cam_doneqs[hash];
4511 mtx_lock(&queue->cam_doneq_mtx);
4512 run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4513 STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4514 done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4515 mtx_unlock(&queue->cam_doneq_mtx);
4516 if (run && !dumping)
4517 wakeup(&queue->cam_doneq);
4521 xpt_done_direct(union ccb *done_ccb)
4524 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE,
4525 ("xpt_done_direct: status %#x\n", done_ccb->ccb_h.status));
4526 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4529 /* Store the time the ccb was in the sim */
4530 done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data);
4531 done_ccb->ccb_h.status |= CAM_QOS_VALID;
4532 xpt_done_process(&done_ccb->ccb_h);
4540 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4545 xpt_alloc_ccb_nowait(void)
4549 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4554 xpt_free_ccb(union ccb *free_ccb)
4556 struct cam_periph *periph;
4558 if (free_ccb->ccb_h.alloc_flags & CAM_CCB_FROM_UMA) {
4560 * Looks like a CCB allocated from a periph UMA zone.
4562 periph = free_ccb->ccb_h.path->periph;
4563 uma_zfree(periph->ccb_zone, free_ccb);
4565 free(free_ccb, M_CAMCCB);
4569 /* Private XPT functions */
4572 * Get a CAM control block for the caller. Charge the structure to the device
4573 * referenced by the path. If we don't have sufficient resources to allocate
4574 * more ccbs, we return NULL.
4577 xpt_get_ccb_nowait(struct cam_periph *periph)
4582 if (periph->ccb_zone != NULL) {
4583 alloc_flags = CAM_CCB_FROM_UMA;
4584 new_ccb = uma_zalloc(periph->ccb_zone, M_ZERO|M_NOWAIT);
4587 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4589 if (new_ccb == NULL)
4591 new_ccb->ccb_h.alloc_flags = alloc_flags;
4592 periph->periph_allocated++;
4593 cam_ccbq_take_opening(&periph->path->device->ccbq);
4598 xpt_get_ccb(struct cam_periph *periph)
4603 cam_periph_unlock(periph);
4604 if (periph->ccb_zone != NULL) {
4605 alloc_flags = CAM_CCB_FROM_UMA;
4606 new_ccb = uma_zalloc(periph->ccb_zone, M_ZERO|M_WAITOK);
4609 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4611 new_ccb->ccb_h.alloc_flags = alloc_flags;
4612 cam_periph_lock(periph);
4613 periph->periph_allocated++;
4614 cam_ccbq_take_opening(&periph->path->device->ccbq);
4619 cam_periph_getccb(struct cam_periph *periph, uint32_t priority)
4621 struct ccb_hdr *ccb_h;
4623 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4624 cam_periph_assert(periph, MA_OWNED);
4625 while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4626 ccb_h->pinfo.priority != priority) {
4627 if (priority < periph->immediate_priority) {
4628 periph->immediate_priority = priority;
4629 xpt_run_allocq(periph, 0);
4631 cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4634 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4635 return ((union ccb *)ccb_h);
4639 xpt_acquire_bus(struct cam_eb *bus)
4648 xpt_release_bus(struct cam_eb *bus)
4652 KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4653 if (--bus->refcount > 0) {
4657 TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4658 xsoftc.bus_generation++;
4660 KASSERT(TAILQ_EMPTY(&bus->et_entries),
4661 ("destroying bus, but target list is not empty"));
4662 cam_sim_release(bus->sim);
4663 mtx_destroy(&bus->eb_mtx);
4664 free(bus, M_CAMXPT);
4667 static struct cam_et *
4668 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4670 struct cam_et *cur_target, *target;
4672 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4673 mtx_assert(&bus->eb_mtx, MA_OWNED);
4674 target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4679 TAILQ_INIT(&target->ed_entries);
4681 target->target_id = target_id;
4682 target->refcount = 1;
4683 target->generation = 0;
4684 target->luns = NULL;
4685 mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4686 timevalclear(&target->last_reset);
4688 * Hold a reference to our parent bus so it
4689 * will not go away before we do.
4693 /* Insertion sort into our bus's target list */
4694 cur_target = TAILQ_FIRST(&bus->et_entries);
4695 while (cur_target != NULL && cur_target->target_id < target_id)
4696 cur_target = TAILQ_NEXT(cur_target, links);
4697 if (cur_target != NULL) {
4698 TAILQ_INSERT_BEFORE(cur_target, target, links);
4700 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4707 xpt_acquire_target(struct cam_et *target)
4709 struct cam_eb *bus = target->bus;
4711 mtx_lock(&bus->eb_mtx);
4713 mtx_unlock(&bus->eb_mtx);
4717 xpt_release_target(struct cam_et *target)
4719 struct cam_eb *bus = target->bus;
4721 mtx_lock(&bus->eb_mtx);
4722 if (--target->refcount > 0) {
4723 mtx_unlock(&bus->eb_mtx);
4726 TAILQ_REMOVE(&bus->et_entries, target, links);
4728 mtx_unlock(&bus->eb_mtx);
4729 KASSERT(TAILQ_EMPTY(&target->ed_entries),
4730 ("destroying target, but device list is not empty"));
4731 xpt_release_bus(bus);
4732 mtx_destroy(&target->luns_mtx);
4734 free(target->luns, M_CAMXPT);
4735 free(target, M_CAMXPT);
4738 static struct cam_ed *
4739 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4742 struct cam_ed *device;
4744 device = xpt_alloc_device(bus, target, lun_id);
4748 device->mintags = 1;
4749 device->maxtags = 1;
4754 xpt_destroy_device(void *context, int pending)
4756 struct cam_ed *device = context;
4758 mtx_lock(&device->device_mtx);
4759 mtx_destroy(&device->device_mtx);
4760 free(device, M_CAMDEV);
4764 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4766 struct cam_ed *cur_device, *device;
4767 struct cam_devq *devq;
4770 mtx_assert(&bus->eb_mtx, MA_OWNED);
4771 /* Make space for us in the device queue on our bus */
4772 devq = bus->sim->devq;
4773 mtx_lock(&devq->send_mtx);
4774 status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4775 mtx_unlock(&devq->send_mtx);
4776 if (status != CAM_REQ_CMP)
4779 device = (struct cam_ed *)malloc(sizeof(*device),
4780 M_CAMDEV, M_NOWAIT|M_ZERO);
4784 cam_init_pinfo(&device->devq_entry);
4785 device->target = target;
4786 device->lun_id = lun_id;
4787 device->sim = bus->sim;
4788 if (cam_ccbq_init(&device->ccbq,
4789 bus->sim->max_dev_openings) != 0) {
4790 free(device, M_CAMDEV);
4793 SLIST_INIT(&device->asyncs);
4794 SLIST_INIT(&device->periphs);
4795 device->generation = 0;
4796 device->flags = CAM_DEV_UNCONFIGURED;
4797 device->tag_delay_count = 0;
4798 device->tag_saved_openings = 0;
4799 device->refcount = 1;
4800 mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4801 callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4802 TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4804 * Hold a reference to our parent bus so it
4805 * will not go away before we do.
4809 cur_device = TAILQ_FIRST(&target->ed_entries);
4810 while (cur_device != NULL && cur_device->lun_id < lun_id)
4811 cur_device = TAILQ_NEXT(cur_device, links);
4812 if (cur_device != NULL)
4813 TAILQ_INSERT_BEFORE(cur_device, device, links);
4815 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4816 target->generation++;
4821 xpt_acquire_device(struct cam_ed *device)
4823 struct cam_eb *bus = device->target->bus;
4825 mtx_lock(&bus->eb_mtx);
4827 mtx_unlock(&bus->eb_mtx);
4831 xpt_release_device(struct cam_ed *device)
4833 struct cam_eb *bus = device->target->bus;
4834 struct cam_devq *devq;
4836 mtx_lock(&bus->eb_mtx);
4837 if (--device->refcount > 0) {
4838 mtx_unlock(&bus->eb_mtx);
4842 TAILQ_REMOVE(&device->target->ed_entries, device,links);
4843 device->target->generation++;
4844 mtx_unlock(&bus->eb_mtx);
4846 /* Release our slot in the devq */
4847 devq = bus->sim->devq;
4848 mtx_lock(&devq->send_mtx);
4849 cam_devq_resize(devq, devq->send_queue.array_size - 1);
4851 KASSERT(SLIST_EMPTY(&device->periphs),
4852 ("destroying device, but periphs list is not empty"));
4853 KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4854 ("destroying device while still queued for ccbs"));
4856 /* The send_mtx must be held when accessing the callout */
4857 if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4858 callout_stop(&device->callout);
4860 mtx_unlock(&devq->send_mtx);
4862 xpt_release_target(device->target);
4864 cam_ccbq_fini(&device->ccbq);
4866 * Free allocated memory. free(9) does nothing if the
4867 * supplied pointer is NULL, so it is safe to call without
4870 free(device->supported_vpds, M_CAMXPT);
4871 free(device->device_id, M_CAMXPT);
4872 free(device->ext_inq, M_CAMXPT);
4873 free(device->physpath, M_CAMXPT);
4874 free(device->rcap_buf, M_CAMXPT);
4875 free(device->serial_num, M_CAMXPT);
4876 free(device->nvme_data, M_CAMXPT);
4877 free(device->nvme_cdata, M_CAMXPT);
4878 taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
4882 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
4888 mtx_lock(&dev->sim->devq->send_mtx);
4889 result = cam_ccbq_resize(&dev->ccbq, newopenings);
4890 mtx_unlock(&dev->sim->devq->send_mtx);
4891 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
4892 || (dev->inq_flags & SID_CmdQue) != 0)
4893 dev->tag_saved_openings = newopenings;
4897 static struct cam_eb *
4898 xpt_find_bus(path_id_t path_id)
4903 for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4905 bus = TAILQ_NEXT(bus, links)) {
4906 if (bus->path_id == path_id) {
4915 static struct cam_et *
4916 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
4918 struct cam_et *target;
4920 mtx_assert(&bus->eb_mtx, MA_OWNED);
4921 for (target = TAILQ_FIRST(&bus->et_entries);
4923 target = TAILQ_NEXT(target, links)) {
4924 if (target->target_id == target_id) {
4932 static struct cam_ed *
4933 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
4935 struct cam_ed *device;
4937 mtx_assert(&target->bus->eb_mtx, MA_OWNED);
4938 for (device = TAILQ_FIRST(&target->ed_entries);
4940 device = TAILQ_NEXT(device, links)) {
4941 if (device->lun_id == lun_id) {
4950 xpt_start_tags(struct cam_path *path)
4952 struct ccb_relsim crs;
4953 struct cam_ed *device;
4954 struct cam_sim *sim;
4957 device = path->device;
4958 sim = path->bus->sim;
4959 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4960 xpt_freeze_devq(path, /*count*/1);
4961 device->inq_flags |= SID_CmdQue;
4962 if (device->tag_saved_openings != 0)
4963 newopenings = device->tag_saved_openings;
4965 newopenings = min(device->maxtags,
4966 sim->max_tagged_dev_openings);
4967 xpt_dev_ccbq_resize(path, newopenings);
4968 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4969 memset(&crs, 0, sizeof(crs));
4970 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4971 crs.ccb_h.func_code = XPT_REL_SIMQ;
4972 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4974 = crs.release_timeout
4977 xpt_action((union ccb *)&crs);
4981 xpt_stop_tags(struct cam_path *path)
4983 struct ccb_relsim crs;
4984 struct cam_ed *device;
4985 struct cam_sim *sim;
4987 device = path->device;
4988 sim = path->bus->sim;
4989 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4990 device->tag_delay_count = 0;
4991 xpt_freeze_devq(path, /*count*/1);
4992 device->inq_flags &= ~SID_CmdQue;
4993 xpt_dev_ccbq_resize(path, sim->max_dev_openings);
4994 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4995 memset(&crs, 0, sizeof(crs));
4996 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4997 crs.ccb_h.func_code = XPT_REL_SIMQ;
4998 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
5000 = crs.release_timeout
5003 xpt_action((union ccb *)&crs);
5007 * Assume all possible buses are detected by this time, so allow boot
5008 * as soon as they all are scanned.
5011 xpt_boot_delay(void *arg)
5018 * Now that all config hooks have completed, start boot_delay timer,
5019 * waiting for possibly still undetected buses (USB) to appear.
5022 xpt_ch_done(void *arg)
5025 callout_init(&xsoftc.boot_callout, 1);
5026 callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay,
5027 SBT_1MS, xpt_boot_delay, NULL, 0);
5029 SYSINIT(xpt_hw_delay, SI_SUB_INT_CONFIG_HOOKS, SI_ORDER_ANY, xpt_ch_done, NULL);
5032 * Now that interrupts are enabled, go find our devices
5035 xpt_config(void *arg)
5037 if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
5038 printf("xpt_config: failed to create taskqueue thread.\n");
5040 /* Setup debugging path */
5041 if (cam_dflags != CAM_DEBUG_NONE) {
5042 if (xpt_create_path(&cam_dpath, NULL,
5043 CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
5044 CAM_DEBUG_LUN) != CAM_REQ_CMP) {
5045 printf("xpt_config: xpt_create_path() failed for debug"
5046 " target %d:%d:%d, debugging disabled\n",
5047 CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
5048 cam_dflags = CAM_DEBUG_NONE;
5053 periphdriver_init(1);
5056 /* Fire up rescan thread. */
5057 if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
5058 "cam", "scanner")) {
5059 printf("xpt_config: failed to create rescan thread.\n");
5064 xpt_hold_boot_locked(void)
5067 if (xsoftc.buses_to_config++ == 0)
5068 root_mount_hold_token("CAM", &xsoftc.xpt_rootmount);
5076 xpt_hold_boot_locked();
5081 xpt_release_boot(void)
5085 if (--xsoftc.buses_to_config == 0) {
5086 if (xsoftc.buses_config_done == 0) {
5087 xsoftc.buses_config_done = 1;
5088 xsoftc.buses_to_config++;
5089 TASK_INIT(&xsoftc.boot_task, 0, xpt_finishconfig_task,
5091 taskqueue_enqueue(taskqueue_thread, &xsoftc.boot_task);
5093 root_mount_rel(&xsoftc.xpt_rootmount);
5099 * If the given device only has one peripheral attached to it, and if that
5100 * peripheral is the passthrough driver, announce it. This insures that the
5101 * user sees some sort of announcement for every peripheral in their system.
5104 xptpassannouncefunc(struct cam_ed *device, void *arg)
5106 struct cam_periph *periph;
5109 for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
5110 periph = SLIST_NEXT(periph, periph_links), i++);
5112 periph = SLIST_FIRST(&device->periphs);
5114 && (strncmp(periph->periph_name, "pass", 4) == 0))
5115 xpt_announce_periph(periph, NULL);
5121 xpt_finishconfig_task(void *context, int pending)
5124 periphdriver_init(2);
5126 * Check for devices with no "standard" peripheral driver
5127 * attached. For any devices like that, announce the
5128 * passthrough driver so the user will see something.
5131 xpt_for_all_devices(xptpassannouncefunc, NULL);
5137 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5138 struct cam_path *path)
5140 struct ccb_setasync csa;
5142 bool xptpath = false;
5145 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5146 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5147 if (status != CAM_REQ_CMP)
5149 xpt_path_lock(path);
5153 memset(&csa, 0, sizeof(csa));
5154 xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5155 csa.ccb_h.func_code = XPT_SASYNC_CB;
5156 csa.event_enable = event;
5157 csa.callback = cbfunc;
5158 csa.callback_arg = cbarg;
5159 xpt_action((union ccb *)&csa);
5160 status = csa.ccb_h.status;
5162 CAM_DEBUG(csa.ccb_h.path, CAM_DEBUG_TRACE,
5163 ("xpt_register_async: func %p\n", cbfunc));
5166 xpt_path_unlock(path);
5167 xpt_free_path(path);
5170 if ((status == CAM_REQ_CMP) &&
5171 (csa.event_enable & AC_FOUND_DEVICE)) {
5173 * Get this peripheral up to date with all
5174 * the currently existing devices.
5176 xpt_for_all_devices(xptsetasyncfunc, &csa);
5178 if ((status == CAM_REQ_CMP) &&
5179 (csa.event_enable & AC_PATH_REGISTERED)) {
5181 * Get this peripheral up to date with all
5182 * the currently existing buses.
5184 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5191 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5193 CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5195 switch (work_ccb->ccb_h.func_code) {
5196 /* Common cases first */
5197 case XPT_PATH_INQ: /* Path routing inquiry */
5199 struct ccb_pathinq *cpi;
5201 cpi = &work_ccb->cpi;
5202 cpi->version_num = 1; /* XXX??? */
5203 cpi->hba_inquiry = 0;
5204 cpi->target_sprt = 0;
5206 cpi->hba_eng_cnt = 0;
5207 cpi->max_target = 0;
5209 cpi->initiator_id = 0;
5210 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5211 strlcpy(cpi->hba_vid, "", HBA_IDLEN);
5212 strlcpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5213 cpi->unit_number = sim->unit_number;
5214 cpi->bus_id = sim->bus_id;
5215 cpi->base_transfer_speed = 0;
5216 cpi->protocol = PROTO_UNSPECIFIED;
5217 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5218 cpi->transport = XPORT_UNSPECIFIED;
5219 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5220 cpi->ccb_h.status = CAM_REQ_CMP;
5224 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5231 * The xpt as a "controller" has no interrupt sources, so polling
5235 xptpoll(struct cam_sim *sim)
5240 xpt_lock_buses(void)
5242 mtx_lock(&xsoftc.xpt_topo_lock);
5246 xpt_unlock_buses(void)
5248 mtx_unlock(&xsoftc.xpt_topo_lock);
5252 xpt_path_mtx(struct cam_path *path)
5255 return (&path->device->device_mtx);
5259 xpt_done_process(struct ccb_hdr *ccb_h)
5261 struct cam_sim *sim = NULL;
5262 struct cam_devq *devq = NULL;
5263 struct mtx *mtx = NULL;
5265 #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING)
5266 struct ccb_scsiio *csio;
5268 if (ccb_h->func_code == XPT_SCSI_IO) {
5269 csio = &((union ccb *)ccb_h)->csio;
5270 if (csio->bio != NULL)
5271 biotrack(csio->bio, __func__);
5275 if (ccb_h->flags & CAM_HIGH_POWER) {
5276 struct highpowerlist *hphead;
5277 struct cam_ed *device;
5279 mtx_lock(&xsoftc.xpt_highpower_lock);
5280 hphead = &xsoftc.highpowerq;
5282 device = STAILQ_FIRST(hphead);
5285 * Increment the count since this command is done.
5287 xsoftc.num_highpower++;
5290 * Any high powered commands queued up?
5292 if (device != NULL) {
5293 STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5294 mtx_unlock(&xsoftc.xpt_highpower_lock);
5296 mtx_lock(&device->sim->devq->send_mtx);
5297 xpt_release_devq_device(device,
5298 /*count*/1, /*runqueue*/TRUE);
5299 mtx_unlock(&device->sim->devq->send_mtx);
5301 mtx_unlock(&xsoftc.xpt_highpower_lock);
5305 * Insulate against a race where the periph is destroyed but CCBs are
5306 * still not all processed. This shouldn't happen, but allows us better
5307 * bug diagnostic when it does.
5309 if (ccb_h->path->bus)
5310 sim = ccb_h->path->bus->sim;
5312 if (ccb_h->status & CAM_RELEASE_SIMQ) {
5313 KASSERT(sim, ("sim missing for CAM_RELEASE_SIMQ request"));
5314 xpt_release_simq(sim, /*run_queue*/FALSE);
5315 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5318 if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5319 && (ccb_h->status & CAM_DEV_QFRZN)) {
5320 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5321 ccb_h->status &= ~CAM_DEV_QFRZN;
5324 if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5325 struct cam_ed *dev = ccb_h->path->device;
5329 KASSERT(devq, ("Periph disappeared with CCB %p %s request pending.",
5330 ccb_h, xpt_action_name(ccb_h->func_code)));
5332 mtx_lock(&devq->send_mtx);
5333 devq->send_active--;
5334 devq->send_openings++;
5335 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5337 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5338 && (dev->ccbq.dev_active == 0))) {
5339 dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5340 xpt_release_devq_device(dev, /*count*/1,
5341 /*run_queue*/FALSE);
5344 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5345 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5346 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5347 xpt_release_devq_device(dev, /*count*/1,
5348 /*run_queue*/FALSE);
5351 if (!device_is_queued(dev))
5352 (void)xpt_schedule_devq(devq, dev);
5354 mtx_unlock(&devq->send_mtx);
5356 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5357 mtx = xpt_path_mtx(ccb_h->path);
5360 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5361 && (--dev->tag_delay_count == 0))
5362 xpt_start_tags(ccb_h->path);
5366 if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5368 mtx = xpt_path_mtx(ccb_h->path);
5378 /* Call the peripheral driver's callback */
5379 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5380 (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5386 * Parameterize instead and use xpt_done_td?
5389 xpt_async_td(void *arg)
5391 struct cam_doneq *queue = arg;
5392 struct ccb_hdr *ccb_h;
5393 STAILQ_HEAD(, ccb_hdr) doneq;
5395 STAILQ_INIT(&doneq);
5396 mtx_lock(&queue->cam_doneq_mtx);
5398 while (STAILQ_EMPTY(&queue->cam_doneq))
5399 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5401 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5402 mtx_unlock(&queue->cam_doneq_mtx);
5404 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5405 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5406 xpt_done_process(ccb_h);
5409 mtx_lock(&queue->cam_doneq_mtx);
5414 xpt_done_td(void *arg)
5416 struct cam_doneq *queue = arg;
5417 struct ccb_hdr *ccb_h;
5418 STAILQ_HEAD(, ccb_hdr) doneq;
5420 STAILQ_INIT(&doneq);
5421 mtx_lock(&queue->cam_doneq_mtx);
5423 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5424 queue->cam_doneq_sleep = 1;
5425 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5427 queue->cam_doneq_sleep = 0;
5429 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5430 mtx_unlock(&queue->cam_doneq_mtx);
5432 THREAD_NO_SLEEPING();
5433 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5434 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5435 xpt_done_process(ccb_h);
5437 THREAD_SLEEPING_OK();
5439 mtx_lock(&queue->cam_doneq_mtx);
5444 camisr_runqueue(void)
5446 struct ccb_hdr *ccb_h;
5447 struct cam_doneq *queue;
5450 /* Process global queues. */
5451 for (i = 0; i < cam_num_doneqs; i++) {
5452 queue = &cam_doneqs[i];
5453 mtx_lock(&queue->cam_doneq_mtx);
5454 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5455 STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5456 mtx_unlock(&queue->cam_doneq_mtx);
5457 xpt_done_process(ccb_h);
5458 mtx_lock(&queue->cam_doneq_mtx);
5460 mtx_unlock(&queue->cam_doneq_mtx);
5465 * @brief Return the device_t associated with the path
5467 * When a SIM is created, it registers a bus with a NEWBUS device_t. This is
5468 * stored in the internal cam_eb bus structure. There is no guarnatee any given
5469 * path will have a @c device_t associated with it (it's legal to call @c
5470 * xpt_bus_register with a @c NULL @c device_t.
5472 * @param path Path to return the device_t for.
5475 xpt_path_sim_device(const struct cam_path *path)
5477 return (path->bus->parent_dev);
5486 static struct kv map[] = {
5487 { XPT_NOOP, "XPT_NOOP" },
5488 { XPT_SCSI_IO, "XPT_SCSI_IO" },
5489 { XPT_GDEV_TYPE, "XPT_GDEV_TYPE" },
5490 { XPT_GDEVLIST, "XPT_GDEVLIST" },
5491 { XPT_PATH_INQ, "XPT_PATH_INQ" },
5492 { XPT_REL_SIMQ, "XPT_REL_SIMQ" },
5493 { XPT_SASYNC_CB, "XPT_SASYNC_CB" },
5494 { XPT_SDEV_TYPE, "XPT_SDEV_TYPE" },
5495 { XPT_SCAN_BUS, "XPT_SCAN_BUS" },
5496 { XPT_DEV_MATCH, "XPT_DEV_MATCH" },
5497 { XPT_DEBUG, "XPT_DEBUG" },
5498 { XPT_PATH_STATS, "XPT_PATH_STATS" },
5499 { XPT_GDEV_STATS, "XPT_GDEV_STATS" },
5500 { XPT_DEV_ADVINFO, "XPT_DEV_ADVINFO" },
5501 { XPT_ASYNC, "XPT_ASYNC" },
5502 { XPT_ABORT, "XPT_ABORT" },
5503 { XPT_RESET_BUS, "XPT_RESET_BUS" },
5504 { XPT_RESET_DEV, "XPT_RESET_DEV" },
5505 { XPT_TERM_IO, "XPT_TERM_IO" },
5506 { XPT_SCAN_LUN, "XPT_SCAN_LUN" },
5507 { XPT_GET_TRAN_SETTINGS, "XPT_GET_TRAN_SETTINGS" },
5508 { XPT_SET_TRAN_SETTINGS, "XPT_SET_TRAN_SETTINGS" },
5509 { XPT_CALC_GEOMETRY, "XPT_CALC_GEOMETRY" },
5510 { XPT_ATA_IO, "XPT_ATA_IO" },
5511 { XPT_GET_SIM_KNOB, "XPT_GET_SIM_KNOB" },
5512 { XPT_SET_SIM_KNOB, "XPT_SET_SIM_KNOB" },
5513 { XPT_NVME_IO, "XPT_NVME_IO" },
5514 { XPT_MMC_IO, "XPT_MMC_IO" },
5515 { XPT_SMP_IO, "XPT_SMP_IO" },
5516 { XPT_SCAN_TGT, "XPT_SCAN_TGT" },
5517 { XPT_NVME_ADMIN, "XPT_NVME_ADMIN" },
5518 { XPT_ENG_INQ, "XPT_ENG_INQ" },
5519 { XPT_ENG_EXEC, "XPT_ENG_EXEC" },
5520 { XPT_EN_LUN, "XPT_EN_LUN" },
5521 { XPT_TARGET_IO, "XPT_TARGET_IO" },
5522 { XPT_ACCEPT_TARGET_IO, "XPT_ACCEPT_TARGET_IO" },
5523 { XPT_CONT_TARGET_IO, "XPT_CONT_TARGET_IO" },
5524 { XPT_IMMED_NOTIFY, "XPT_IMMED_NOTIFY" },
5525 { XPT_NOTIFY_ACK, "XPT_NOTIFY_ACK" },
5526 { XPT_IMMEDIATE_NOTIFY, "XPT_IMMEDIATE_NOTIFY" },
5527 { XPT_NOTIFY_ACKNOWLEDGE, "XPT_NOTIFY_ACKNOWLEDGE" },
5532 xpt_action_name(uint32_t action)
5534 static char buffer[32]; /* Only for unknown messages -- racy */
5535 struct kv *walker = map;
5537 while (walker->name != NULL) {
5538 if (walker->v == action)
5539 return (walker->name);
5543 snprintf(buffer, sizeof(buffer), "%#x", action);