2 * Implementation of the Common Access Method Transport (XPT) layer.
4 * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
5 * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/types.h>
37 #include <sys/malloc.h>
38 #include <sys/kernel.h>
41 #include <sys/fcntl.h>
42 #include <sys/interrupt.h>
46 #include <sys/taskqueue.h>
49 #include <sys/mutex.h>
50 #include <sys/sysctl.h>
51 #include <sys/kthread.h>
54 #include <cam/cam_ccb.h>
55 #include <cam/cam_periph.h>
56 #include <cam/cam_queue.h>
57 #include <cam/cam_sim.h>
58 #include <cam/cam_xpt.h>
59 #include <cam/cam_xpt_sim.h>
60 #include <cam/cam_xpt_periph.h>
61 #include <cam/cam_xpt_internal.h>
62 #include <cam/cam_debug.h>
63 #include <cam/cam_compat.h>
65 #include <cam/scsi/scsi_all.h>
66 #include <cam/scsi/scsi_message.h>
67 #include <cam/scsi/scsi_pass.h>
69 #include <machine/md_var.h> /* geometry translation */
70 #include <machine/stdarg.h> /* for xpt_print below */
75 * This is the maximum number of high powered commands (e.g. start unit)
76 * that can be outstanding at a particular time.
78 #ifndef CAM_MAX_HIGHPOWER
79 #define CAM_MAX_HIGHPOWER 4
82 /* Datastructures internal to the xpt layer */
83 MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers");
84 MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices");
85 MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs");
86 MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths");
88 /* Object for defering XPT actions to a taskqueue */
96 uint32_t xpt_generation;
98 /* number of high powered commands that can go through right now */
99 struct mtx xpt_highpower_lock;
100 STAILQ_HEAD(highpowerlist, cam_ed) highpowerq;
103 /* queue for handling async rescan requests. */
104 TAILQ_HEAD(, ccb_hdr) ccb_scanq;
106 int buses_config_done;
108 /* Registered busses */
109 TAILQ_HEAD(,cam_eb) xpt_busses;
110 u_int bus_generation;
112 struct intr_config_hook *xpt_config_hook;
115 struct callout boot_callout;
117 struct mtx xpt_topo_lock;
119 struct taskqueue *xpt_taskq;
124 DM_RET_FLAG_MASK = 0x0f,
127 DM_RET_DESCEND = 0x20,
129 DM_RET_ACTION_MASK = 0xf0
137 } xpt_traverse_depth;
139 struct xpt_traverse_config {
140 xpt_traverse_depth depth;
145 typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg);
146 typedef int xpt_targetfunc_t (struct cam_et *target, void *arg);
147 typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg);
148 typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg);
149 typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg);
151 /* Transport layer configuration information */
152 static struct xpt_softc xsoftc;
154 MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF);
156 SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN,
157 &xsoftc.boot_delay, 0, "Bus registration wait time");
158 SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD,
159 &xsoftc.xpt_generation, 0, "CAM peripheral generation count");
162 struct mtx_padalign cam_doneq_mtx;
163 STAILQ_HEAD(, ccb_hdr) cam_doneq;
167 static struct cam_doneq cam_doneqs[MAXCPU];
168 static int cam_num_doneqs;
169 static struct proc *cam_proc;
171 SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN,
172 &cam_num_doneqs, 0, "Number of completion queues/threads");
174 struct cam_periph *xpt_periph;
176 static periph_init_t xpt_periph_init;
178 static struct periph_driver xpt_driver =
180 xpt_periph_init, "xpt",
181 TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0,
185 PERIPHDRIVER_DECLARE(xpt, xpt_driver);
187 static d_open_t xptopen;
188 static d_close_t xptclose;
189 static d_ioctl_t xptioctl;
190 static d_ioctl_t xptdoioctl;
192 static struct cdevsw xpt_cdevsw = {
193 .d_version = D_VERSION,
201 /* Storage for debugging datastructures */
202 struct cam_path *cam_dpath;
203 u_int32_t cam_dflags = CAM_DEBUG_FLAGS;
204 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN,
205 &cam_dflags, 0, "Enabled debug flags");
206 u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
207 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN,
208 &cam_debug_delay, 0, "Delay in us after each debug message");
210 /* Our boot-time initialization hook */
211 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
213 static moduledata_t cam_moduledata = {
215 cam_module_event_handler,
219 static int xpt_init(void *);
221 DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND);
222 MODULE_VERSION(cam, 1);
225 static void xpt_async_bcast(struct async_list *async_head,
226 u_int32_t async_code,
227 struct cam_path *path,
229 static path_id_t xptnextfreepathid(void);
230 static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus);
231 static union ccb *xpt_get_ccb(struct cam_periph *periph);
232 static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph);
233 static void xpt_run_allocq(struct cam_periph *periph, int sleep);
234 static void xpt_run_allocq_task(void *context, int pending);
235 static void xpt_run_devq(struct cam_devq *devq);
236 static timeout_t xpt_release_devq_timeout;
237 static void xpt_release_simq_timeout(void *arg) __unused;
238 static void xpt_acquire_bus(struct cam_eb *bus);
239 static void xpt_release_bus(struct cam_eb *bus);
240 static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count);
241 static int xpt_release_devq_device(struct cam_ed *dev, u_int count,
243 static struct cam_et*
244 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id);
245 static void xpt_acquire_target(struct cam_et *target);
246 static void xpt_release_target(struct cam_et *target);
247 static struct cam_eb*
248 xpt_find_bus(path_id_t path_id);
249 static struct cam_et*
250 xpt_find_target(struct cam_eb *bus, target_id_t target_id);
251 static struct cam_ed*
252 xpt_find_device(struct cam_et *target, lun_id_t lun_id);
253 static void xpt_config(void *arg);
254 static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo,
255 u_int32_t new_priority);
256 static xpt_devicefunc_t xptpassannouncefunc;
257 static void xptaction(struct cam_sim *sim, union ccb *work_ccb);
258 static void xptpoll(struct cam_sim *sim);
259 static void camisr_runqueue(void);
260 static void xpt_done_process(struct ccb_hdr *ccb_h);
261 static void xpt_done_td(void *);
262 static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns,
263 u_int num_patterns, struct cam_eb *bus);
264 static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns,
266 struct cam_ed *device);
267 static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns,
269 struct cam_periph *periph);
270 static xpt_busfunc_t xptedtbusfunc;
271 static xpt_targetfunc_t xptedttargetfunc;
272 static xpt_devicefunc_t xptedtdevicefunc;
273 static xpt_periphfunc_t xptedtperiphfunc;
274 static xpt_pdrvfunc_t xptplistpdrvfunc;
275 static xpt_periphfunc_t xptplistperiphfunc;
276 static int xptedtmatch(struct ccb_dev_match *cdm);
277 static int xptperiphlistmatch(struct ccb_dev_match *cdm);
278 static int xptbustraverse(struct cam_eb *start_bus,
279 xpt_busfunc_t *tr_func, void *arg);
280 static int xpttargettraverse(struct cam_eb *bus,
281 struct cam_et *start_target,
282 xpt_targetfunc_t *tr_func, void *arg);
283 static int xptdevicetraverse(struct cam_et *target,
284 struct cam_ed *start_device,
285 xpt_devicefunc_t *tr_func, void *arg);
286 static int xptperiphtraverse(struct cam_ed *device,
287 struct cam_periph *start_periph,
288 xpt_periphfunc_t *tr_func, void *arg);
289 static int xptpdrvtraverse(struct periph_driver **start_pdrv,
290 xpt_pdrvfunc_t *tr_func, void *arg);
291 static int xptpdperiphtraverse(struct periph_driver **pdrv,
292 struct cam_periph *start_periph,
293 xpt_periphfunc_t *tr_func,
295 static xpt_busfunc_t xptdefbusfunc;
296 static xpt_targetfunc_t xptdeftargetfunc;
297 static xpt_devicefunc_t xptdefdevicefunc;
298 static xpt_periphfunc_t xptdefperiphfunc;
299 static void xpt_finishconfig_task(void *context, int pending);
300 static void xpt_dev_async_default(u_int32_t async_code,
302 struct cam_et *target,
303 struct cam_ed *device,
305 static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus,
306 struct cam_et *target,
308 static xpt_devicefunc_t xptsetasyncfunc;
309 static xpt_busfunc_t xptsetasyncbusfunc;
310 static cam_status xptregister(struct cam_periph *periph,
312 static __inline int device_is_queued(struct cam_ed *device);
315 xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev)
319 mtx_assert(&devq->send_mtx, MA_OWNED);
320 if ((dev->ccbq.queue.entries > 0) &&
321 (dev->ccbq.dev_openings > 0) &&
322 (dev->ccbq.queue.qfrozen_cnt == 0)) {
324 * The priority of a device waiting for controller
325 * resources is that of the highest priority CCB
329 xpt_schedule_dev(&devq->send_queue,
331 CAMQ_GET_PRIO(&dev->ccbq.queue));
339 device_is_queued(struct cam_ed *device)
341 return (device->devq_entry.index != CAM_UNQUEUED_INDEX);
347 make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0");
351 xptopen(struct cdev *dev, int flags, int fmt, struct thread *td)
355 * Only allow read-write access.
357 if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0))
361 * We don't allow nonblocking access.
363 if ((flags & O_NONBLOCK) != 0) {
364 printf("%s: can't do nonblocking access\n", devtoname(dev));
372 xptclose(struct cdev *dev, int flag, int fmt, struct thread *td)
379 * Don't automatically grab the xpt softc lock here even though this is going
380 * through the xpt device. The xpt device is really just a back door for
381 * accessing other devices and SIMs, so the right thing to do is to grab
382 * the appropriate SIM lock once the bus/SIM is located.
385 xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
389 if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) {
390 error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl);
396 xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td)
404 * For the transport layer CAMIOCOMMAND ioctl, we really only want
405 * to accept CCB types that don't quite make sense to send through a
406 * passthrough driver. XPT_PATH_INQ is an exception to this, as stated
414 inccb = (union ccb *)addr;
416 bus = xpt_find_bus(inccb->ccb_h.path_id);
420 switch (inccb->ccb_h.func_code) {
423 if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD ||
424 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
425 xpt_release_bus(bus);
430 if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD ||
431 inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) {
432 xpt_release_bus(bus);
440 switch(inccb->ccb_h.func_code) {
448 ccb = xpt_alloc_ccb();
451 * Create a path using the bus, target, and lun the
454 if (xpt_create_path(&ccb->ccb_h.path, NULL,
455 inccb->ccb_h.path_id,
456 inccb->ccb_h.target_id,
457 inccb->ccb_h.target_lun) !=
463 /* Ensure all of our fields are correct */
464 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path,
465 inccb->ccb_h.pinfo.priority);
466 xpt_merge_ccb(ccb, inccb);
467 xpt_path_lock(ccb->ccb_h.path);
468 cam_periph_runccb(ccb, NULL, 0, 0, NULL);
469 xpt_path_unlock(ccb->ccb_h.path);
470 bcopy(ccb, inccb, sizeof(union ccb));
471 xpt_free_path(ccb->ccb_h.path);
479 * This is an immediate CCB, so it's okay to
480 * allocate it on the stack.
484 * Create a path using the bus, target, and lun the
487 if (xpt_create_path(&ccb.ccb_h.path, NULL,
488 inccb->ccb_h.path_id,
489 inccb->ccb_h.target_id,
490 inccb->ccb_h.target_lun) !=
495 /* Ensure all of our fields are correct */
496 xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path,
497 inccb->ccb_h.pinfo.priority);
498 xpt_merge_ccb(&ccb, inccb);
500 bcopy(&ccb, inccb, sizeof(union ccb));
501 xpt_free_path(ccb.ccb_h.path);
505 case XPT_DEV_MATCH: {
506 struct cam_periph_map_info mapinfo;
507 struct cam_path *old_path;
510 * We can't deal with physical addresses for this
511 * type of transaction.
513 if ((inccb->ccb_h.flags & CAM_DATA_MASK) !=
520 * Save this in case the caller had it set to
521 * something in particular.
523 old_path = inccb->ccb_h.path;
526 * We really don't need a path for the matching
527 * code. The path is needed because of the
528 * debugging statements in xpt_action(). They
529 * assume that the CCB has a valid path.
531 inccb->ccb_h.path = xpt_periph->path;
533 bzero(&mapinfo, sizeof(mapinfo));
536 * Map the pattern and match buffers into kernel
537 * virtual address space.
539 error = cam_periph_mapmem(inccb, &mapinfo, MAXPHYS);
542 inccb->ccb_h.path = old_path;
547 * This is an immediate CCB, we can send it on directly.
552 * Map the buffers back into user space.
554 cam_periph_unmapmem(inccb, &mapinfo);
556 inccb->ccb_h.path = old_path;
565 xpt_release_bus(bus);
569 * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input,
570 * with the periphal driver name and unit name filled in. The other
571 * fields don't really matter as input. The passthrough driver name
572 * ("pass"), and unit number are passed back in the ccb. The current
573 * device generation number, and the index into the device peripheral
574 * driver list, and the status are also passed back. Note that
575 * since we do everything in one pass, unlike the XPT_GDEVLIST ccb,
576 * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is
577 * (or rather should be) impossible for the device peripheral driver
578 * list to change since we look at the whole thing in one pass, and
579 * we do it with lock protection.
582 case CAMGETPASSTHRU: {
584 struct cam_periph *periph;
585 struct periph_driver **p_drv;
588 int base_periph_found;
590 ccb = (union ccb *)addr;
591 unit = ccb->cgdl.unit_number;
592 name = ccb->cgdl.periph_name;
593 base_periph_found = 0;
596 * Sanity check -- make sure we don't get a null peripheral
599 if (*ccb->cgdl.periph_name == '\0') {
604 /* Keep the list from changing while we traverse it */
607 /* first find our driver in the list of drivers */
608 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++)
609 if (strcmp((*p_drv)->driver_name, name) == 0)
612 if (*p_drv == NULL) {
614 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
615 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
616 *ccb->cgdl.periph_name = '\0';
617 ccb->cgdl.unit_number = 0;
623 * Run through every peripheral instance of this driver
624 * and check to see whether it matches the unit passed
625 * in by the user. If it does, get out of the loops and
626 * find the passthrough driver associated with that
629 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL;
630 periph = TAILQ_NEXT(periph, unit_links)) {
632 if (periph->unit_number == unit)
636 * If we found the peripheral driver that the user passed
637 * in, go through all of the peripheral drivers for that
638 * particular device and look for a passthrough driver.
640 if (periph != NULL) {
641 struct cam_ed *device;
644 base_periph_found = 1;
645 device = periph->path->device;
646 for (i = 0, periph = SLIST_FIRST(&device->periphs);
648 periph = SLIST_NEXT(periph, periph_links), i++) {
650 * Check to see whether we have a
651 * passthrough device or not.
653 if (strcmp(periph->periph_name, "pass") == 0) {
655 * Fill in the getdevlist fields.
657 strcpy(ccb->cgdl.periph_name,
658 periph->periph_name);
659 ccb->cgdl.unit_number =
661 if (SLIST_NEXT(periph, periph_links))
663 CAM_GDEVLIST_MORE_DEVS;
666 CAM_GDEVLIST_LAST_DEVICE;
667 ccb->cgdl.generation =
671 * Fill in some CCB header fields
672 * that the user may want.
675 periph->path->bus->path_id;
676 ccb->ccb_h.target_id =
677 periph->path->target->target_id;
678 ccb->ccb_h.target_lun =
679 periph->path->device->lun_id;
680 ccb->ccb_h.status = CAM_REQ_CMP;
687 * If the periph is null here, one of two things has
688 * happened. The first possibility is that we couldn't
689 * find the unit number of the particular peripheral driver
690 * that the user is asking about. e.g. the user asks for
691 * the passthrough driver for "da11". We find the list of
692 * "da" peripherals all right, but there is no unit 11.
693 * The other possibility is that we went through the list
694 * of peripheral drivers attached to the device structure,
695 * but didn't find one with the name "pass". Either way,
696 * we return ENOENT, since we couldn't find something.
698 if (periph == NULL) {
699 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
700 ccb->cgdl.status = CAM_GDEVLIST_ERROR;
701 *ccb->cgdl.periph_name = '\0';
702 ccb->cgdl.unit_number = 0;
705 * It is unfortunate that this is even necessary,
706 * but there are many, many clueless users out there.
707 * If this is true, the user is looking for the
708 * passthrough driver, but doesn't have one in his
711 if (base_periph_found == 1) {
712 printf("xptioctl: pass driver is not in the "
714 printf("xptioctl: put \"device pass\" in "
715 "your kernel config file\n");
730 cam_module_event_handler(module_t mod, int what, void *arg)
736 if ((error = xpt_init(NULL)) != 0)
749 xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb)
752 if (done_ccb->ccb_h.ppriv_ptr1 == NULL) {
753 xpt_free_path(done_ccb->ccb_h.path);
754 xpt_free_ccb(done_ccb);
756 done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1;
757 (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
762 /* thread to handle bus rescans */
764 xpt_scanner_thread(void *dummy)
767 struct cam_path path;
771 if (TAILQ_EMPTY(&xsoftc.ccb_scanq))
772 msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO,
774 if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) {
775 TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
779 * Since lock can be dropped inside and path freed
780 * by completion callback even before return here,
781 * take our own path copy for reference.
783 xpt_copy_path(&path, ccb->ccb_h.path);
784 xpt_path_lock(&path);
786 xpt_path_unlock(&path);
787 xpt_release_path(&path);
795 xpt_rescan(union ccb *ccb)
799 /* Prepare request */
800 if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD &&
801 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
802 ccb->ccb_h.func_code = XPT_SCAN_BUS;
803 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
804 ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD)
805 ccb->ccb_h.func_code = XPT_SCAN_TGT;
806 else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD &&
807 ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD)
808 ccb->ccb_h.func_code = XPT_SCAN_LUN;
810 xpt_print(ccb->ccb_h.path, "illegal scan path\n");
811 xpt_free_path(ccb->ccb_h.path);
815 ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp;
816 ccb->ccb_h.cbfcnp = xpt_rescan_done;
817 xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT);
818 /* Don't make duplicate entries for the same paths. */
820 if (ccb->ccb_h.ppriv_ptr1 == NULL) {
821 TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) {
822 if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) {
823 wakeup(&xsoftc.ccb_scanq);
825 xpt_print(ccb->ccb_h.path, "rescan already queued\n");
826 xpt_free_path(ccb->ccb_h.path);
832 TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe);
833 xsoftc.buses_to_config++;
834 wakeup(&xsoftc.ccb_scanq);
838 /* Functions accessed by the peripheral drivers */
840 xpt_init(void *dummy)
842 struct cam_sim *xpt_sim;
843 struct cam_path *path;
844 struct cam_devq *devq;
848 TAILQ_INIT(&xsoftc.xpt_busses);
849 TAILQ_INIT(&xsoftc.ccb_scanq);
850 STAILQ_INIT(&xsoftc.highpowerq);
851 xsoftc.num_highpower = CAM_MAX_HIGHPOWER;
853 mtx_init(&xsoftc.xpt_lock, "XPT lock", NULL, MTX_DEF);
854 mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF);
855 xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK,
856 taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq);
858 #ifdef CAM_BOOT_DELAY
860 * Override this value at compile time to assist our users
861 * who don't use loader to boot a kernel.
863 xsoftc.boot_delay = CAM_BOOT_DELAY;
866 * The xpt layer is, itself, the equivelent of a SIM.
867 * Allow 16 ccbs in the ccb pool for it. This should
868 * give decent parallelism when we probe busses and
869 * perform other XPT functions.
871 devq = cam_simq_alloc(16);
872 xpt_sim = cam_sim_alloc(xptaction,
877 /*mtx*/&xsoftc.xpt_lock,
878 /*max_dev_transactions*/0,
879 /*max_tagged_dev_transactions*/0,
884 mtx_lock(&xsoftc.xpt_lock);
885 if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) {
886 mtx_unlock(&xsoftc.xpt_lock);
887 printf("xpt_init: xpt_bus_register failed with status %#x,"
888 " failing attach\n", status);
891 mtx_unlock(&xsoftc.xpt_lock);
894 * Looking at the XPT from the SIM layer, the XPT is
895 * the equivelent of a peripheral driver. Allocate
896 * a peripheral driver entry for us.
898 if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID,
900 CAM_LUN_WILDCARD)) != CAM_REQ_CMP) {
901 printf("xpt_init: xpt_create_path failed with status %#x,"
902 " failing attach\n", status);
906 cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO,
907 path, NULL, 0, xpt_sim);
908 xpt_path_unlock(path);
911 if (cam_num_doneqs < 1)
912 cam_num_doneqs = 1 + mp_ncpus / 6;
913 else if (cam_num_doneqs > MAXCPU)
914 cam_num_doneqs = MAXCPU;
915 for (i = 0; i < cam_num_doneqs; i++) {
916 mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL,
918 STAILQ_INIT(&cam_doneqs[i].cam_doneq);
919 error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i],
920 &cam_proc, NULL, 0, 0, "cam", "doneq%d", i);
926 if (cam_num_doneqs < 1) {
927 printf("xpt_init: Cannot init completion queues "
928 "- failing attach\n");
932 * Register a callback for when interrupts are enabled.
934 xsoftc.xpt_config_hook =
935 (struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
936 M_CAMXPT, M_NOWAIT | M_ZERO);
937 if (xsoftc.xpt_config_hook == NULL) {
938 printf("xpt_init: Cannot malloc config hook "
939 "- failing attach\n");
942 xsoftc.xpt_config_hook->ich_func = xpt_config;
943 if (config_intrhook_establish(xsoftc.xpt_config_hook) != 0) {
944 free (xsoftc.xpt_config_hook, M_CAMXPT);
945 printf("xpt_init: config_intrhook_establish failed "
946 "- failing attach\n");
953 xptregister(struct cam_periph *periph, void *arg)
955 struct cam_sim *xpt_sim;
957 if (periph == NULL) {
958 printf("xptregister: periph was NULL!!\n");
959 return(CAM_REQ_CMP_ERR);
962 xpt_sim = (struct cam_sim *)arg;
963 xpt_sim->softc = periph;
965 periph->softc = NULL;
971 xpt_add_periph(struct cam_periph *periph)
973 struct cam_ed *device;
976 TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph);
977 device = periph->path->device;
978 status = CAM_REQ_CMP;
979 if (device != NULL) {
980 mtx_lock(&device->target->bus->eb_mtx);
981 device->generation++;
982 SLIST_INSERT_HEAD(&device->periphs, periph, periph_links);
983 mtx_unlock(&device->target->bus->eb_mtx);
984 atomic_add_32(&xsoftc.xpt_generation, 1);
991 xpt_remove_periph(struct cam_periph *periph)
993 struct cam_ed *device;
995 device = periph->path->device;
996 if (device != NULL) {
997 mtx_lock(&device->target->bus->eb_mtx);
998 device->generation++;
999 SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links);
1000 mtx_unlock(&device->target->bus->eb_mtx);
1001 atomic_add_32(&xsoftc.xpt_generation, 1);
1007 xpt_announce_periph(struct cam_periph *periph, char *announce_string)
1009 struct cam_path *path = periph->path;
1011 cam_periph_assert(periph, MA_OWNED);
1012 periph->flags |= CAM_PERIPH_ANNOUNCED;
1014 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1015 periph->periph_name, periph->unit_number,
1016 path->bus->sim->sim_name,
1017 path->bus->sim->unit_number,
1018 path->bus->sim->bus_id,
1020 path->target->target_id,
1021 (uintmax_t)path->device->lun_id);
1022 printf("%s%d: ", periph->periph_name, periph->unit_number);
1023 if (path->device->protocol == PROTO_SCSI)
1024 scsi_print_inquiry(&path->device->inq_data);
1025 else if (path->device->protocol == PROTO_ATA ||
1026 path->device->protocol == PROTO_SATAPM)
1027 ata_print_ident(&path->device->ident_data);
1028 else if (path->device->protocol == PROTO_SEMB)
1030 (struct sep_identify_data *)&path->device->ident_data);
1032 printf("Unknown protocol device\n");
1033 if (path->device->serial_num_len > 0) {
1034 /* Don't wrap the screen - print only the first 60 chars */
1035 printf("%s%d: Serial Number %.60s\n", periph->periph_name,
1036 periph->unit_number, path->device->serial_num);
1038 /* Announce transport details. */
1039 (*(path->bus->xport->announce))(periph);
1040 /* Announce command queueing. */
1041 if (path->device->inq_flags & SID_CmdQue
1042 || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) {
1043 printf("%s%d: Command Queueing enabled\n",
1044 periph->periph_name, periph->unit_number);
1046 /* Announce caller's details if they've passed in. */
1047 if (announce_string != NULL)
1048 printf("%s%d: %s\n", periph->periph_name,
1049 periph->unit_number, announce_string);
1053 xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string)
1056 printf("%s%d: quirks=0x%b\n", periph->periph_name,
1057 periph->unit_number, quirks, bit_string);
1062 xpt_denounce_periph(struct cam_periph *periph)
1064 struct cam_path *path = periph->path;
1066 cam_periph_assert(periph, MA_OWNED);
1067 printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n",
1068 periph->periph_name, periph->unit_number,
1069 path->bus->sim->sim_name,
1070 path->bus->sim->unit_number,
1071 path->bus->sim->bus_id,
1073 path->target->target_id,
1074 (uintmax_t)path->device->lun_id);
1075 printf("%s%d: ", periph->periph_name, periph->unit_number);
1076 if (path->device->protocol == PROTO_SCSI)
1077 scsi_print_inquiry_short(&path->device->inq_data);
1078 else if (path->device->protocol == PROTO_ATA ||
1079 path->device->protocol == PROTO_SATAPM)
1080 ata_print_ident_short(&path->device->ident_data);
1081 else if (path->device->protocol == PROTO_SEMB)
1082 semb_print_ident_short(
1083 (struct sep_identify_data *)&path->device->ident_data);
1085 printf("Unknown protocol device");
1086 if (path->device->serial_num_len > 0)
1087 printf(" s/n %.60s", path->device->serial_num);
1088 printf(" detached\n");
1093 xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path)
1096 struct ccb_dev_advinfo cdai;
1097 struct scsi_vpd_id_descriptor *idd;
1099 xpt_path_assert(path, MA_OWNED);
1101 memset(&cdai, 0, sizeof(cdai));
1102 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
1103 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
1106 if (!strcmp(attr, "GEOM::ident"))
1107 cdai.buftype = CDAI_TYPE_SERIAL_NUM;
1108 else if (!strcmp(attr, "GEOM::physpath"))
1109 cdai.buftype = CDAI_TYPE_PHYS_PATH;
1110 else if (strcmp(attr, "GEOM::lunid") == 0 ||
1111 strcmp(attr, "GEOM::lunname") == 0) {
1112 cdai.buftype = CDAI_TYPE_SCSI_DEVID;
1113 cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
1117 cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT|M_ZERO);
1118 if (cdai.buf == NULL) {
1122 xpt_action((union ccb *)&cdai); /* can only be synchronous */
1123 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
1124 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
1125 if (cdai.provsiz == 0)
1127 if (cdai.buftype == CDAI_TYPE_SCSI_DEVID) {
1128 if (strcmp(attr, "GEOM::lunid") == 0) {
1129 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1130 cdai.provsiz, scsi_devid_is_lun_naa);
1132 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1133 cdai.provsiz, scsi_devid_is_lun_eui64);
1137 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1138 cdai.provsiz, scsi_devid_is_lun_t10);
1140 idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
1141 cdai.provsiz, scsi_devid_is_lun_name);
1145 if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII) {
1146 if (idd->length < len) {
1147 for (l = 0; l < idd->length; l++)
1148 buf[l] = idd->identifier[l] ?
1149 idd->identifier[l] : ' ';
1153 } else if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) {
1154 l = strnlen(idd->identifier, idd->length);
1156 bcopy(idd->identifier, buf, l);
1161 if (idd->length * 2 < len) {
1162 for (l = 0; l < idd->length; l++)
1163 sprintf(buf + l * 2, "%02x",
1164 idd->identifier[l]);
1170 if (strlcpy(buf, cdai.buf, len) >= len)
1175 if (cdai.buf != NULL)
1176 free(cdai.buf, M_CAMXPT);
1180 static dev_match_ret
1181 xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1184 dev_match_ret retval;
1187 retval = DM_RET_NONE;
1190 * If we aren't given something to match against, that's an error.
1193 return(DM_RET_ERROR);
1196 * If there are no match entries, then this bus matches no
1199 if ((patterns == NULL) || (num_patterns == 0))
1200 return(DM_RET_DESCEND | DM_RET_COPY);
1202 for (i = 0; i < num_patterns; i++) {
1203 struct bus_match_pattern *cur_pattern;
1206 * If the pattern in question isn't for a bus node, we
1207 * aren't interested. However, we do indicate to the
1208 * calling routine that we should continue descending the
1209 * tree, since the user wants to match against lower-level
1212 if (patterns[i].type != DEV_MATCH_BUS) {
1213 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1214 retval |= DM_RET_DESCEND;
1218 cur_pattern = &patterns[i].pattern.bus_pattern;
1221 * If they want to match any bus node, we give them any
1224 if (cur_pattern->flags == BUS_MATCH_ANY) {
1225 /* set the copy flag */
1226 retval |= DM_RET_COPY;
1229 * If we've already decided on an action, go ahead
1232 if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE)
1237 * Not sure why someone would do this...
1239 if (cur_pattern->flags == BUS_MATCH_NONE)
1242 if (((cur_pattern->flags & BUS_MATCH_PATH) != 0)
1243 && (cur_pattern->path_id != bus->path_id))
1246 if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0)
1247 && (cur_pattern->bus_id != bus->sim->bus_id))
1250 if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0)
1251 && (cur_pattern->unit_number != bus->sim->unit_number))
1254 if (((cur_pattern->flags & BUS_MATCH_NAME) != 0)
1255 && (strncmp(cur_pattern->dev_name, bus->sim->sim_name,
1260 * If we get to this point, the user definitely wants
1261 * information on this bus. So tell the caller to copy the
1264 retval |= DM_RET_COPY;
1267 * If the return action has been set to descend, then we
1268 * know that we've already seen a non-bus matching
1269 * expression, therefore we need to further descend the tree.
1270 * This won't change by continuing around the loop, so we
1271 * go ahead and return. If we haven't seen a non-bus
1272 * matching expression, we keep going around the loop until
1273 * we exhaust the matching expressions. We'll set the stop
1274 * flag once we fall out of the loop.
1276 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1281 * If the return action hasn't been set to descend yet, that means
1282 * we haven't seen anything other than bus matching patterns. So
1283 * tell the caller to stop descending the tree -- the user doesn't
1284 * want to match against lower level tree elements.
1286 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1287 retval |= DM_RET_STOP;
1292 static dev_match_ret
1293 xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns,
1294 struct cam_ed *device)
1296 dev_match_ret retval;
1299 retval = DM_RET_NONE;
1302 * If we aren't given something to match against, that's an error.
1305 return(DM_RET_ERROR);
1308 * If there are no match entries, then this device matches no
1311 if ((patterns == NULL) || (num_patterns == 0))
1312 return(DM_RET_DESCEND | DM_RET_COPY);
1314 for (i = 0; i < num_patterns; i++) {
1315 struct device_match_pattern *cur_pattern;
1316 struct scsi_vpd_device_id *device_id_page;
1319 * If the pattern in question isn't for a device node, we
1320 * aren't interested.
1322 if (patterns[i].type != DEV_MATCH_DEVICE) {
1323 if ((patterns[i].type == DEV_MATCH_PERIPH)
1324 && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE))
1325 retval |= DM_RET_DESCEND;
1329 cur_pattern = &patterns[i].pattern.device_pattern;
1331 /* Error out if mutually exclusive options are specified. */
1332 if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1333 == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID))
1334 return(DM_RET_ERROR);
1337 * If they want to match any device node, we give them any
1340 if (cur_pattern->flags == DEV_MATCH_ANY)
1344 * Not sure why someone would do this...
1346 if (cur_pattern->flags == DEV_MATCH_NONE)
1349 if (((cur_pattern->flags & DEV_MATCH_PATH) != 0)
1350 && (cur_pattern->path_id != device->target->bus->path_id))
1353 if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0)
1354 && (cur_pattern->target_id != device->target->target_id))
1357 if (((cur_pattern->flags & DEV_MATCH_LUN) != 0)
1358 && (cur_pattern->target_lun != device->lun_id))
1361 if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0)
1362 && (cam_quirkmatch((caddr_t)&device->inq_data,
1363 (caddr_t)&cur_pattern->data.inq_pat,
1364 1, sizeof(cur_pattern->data.inq_pat),
1365 scsi_static_inquiry_match) == NULL))
1368 device_id_page = (struct scsi_vpd_device_id *)device->device_id;
1369 if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0)
1370 && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN
1371 || scsi_devid_match((uint8_t *)device_id_page->desc_list,
1372 device->device_id_len
1373 - SVPD_DEVICE_ID_HDR_LEN,
1374 cur_pattern->data.devid_pat.id,
1375 cur_pattern->data.devid_pat.id_len) != 0))
1380 * If we get to this point, the user definitely wants
1381 * information on this device. So tell the caller to copy
1384 retval |= DM_RET_COPY;
1387 * If the return action has been set to descend, then we
1388 * know that we've already seen a peripheral matching
1389 * expression, therefore we need to further descend the tree.
1390 * This won't change by continuing around the loop, so we
1391 * go ahead and return. If we haven't seen a peripheral
1392 * matching expression, we keep going around the loop until
1393 * we exhaust the matching expressions. We'll set the stop
1394 * flag once we fall out of the loop.
1396 if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND)
1401 * If the return action hasn't been set to descend yet, that means
1402 * we haven't seen any peripheral matching patterns. So tell the
1403 * caller to stop descending the tree -- the user doesn't want to
1404 * match against lower level tree elements.
1406 if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)
1407 retval |= DM_RET_STOP;
1413 * Match a single peripheral against any number of match patterns.
1415 static dev_match_ret
1416 xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns,
1417 struct cam_periph *periph)
1419 dev_match_ret retval;
1423 * If we aren't given something to match against, that's an error.
1426 return(DM_RET_ERROR);
1429 * If there are no match entries, then this peripheral matches no
1432 if ((patterns == NULL) || (num_patterns == 0))
1433 return(DM_RET_STOP | DM_RET_COPY);
1436 * There aren't any nodes below a peripheral node, so there's no
1437 * reason to descend the tree any further.
1439 retval = DM_RET_STOP;
1441 for (i = 0; i < num_patterns; i++) {
1442 struct periph_match_pattern *cur_pattern;
1445 * If the pattern in question isn't for a peripheral, we
1446 * aren't interested.
1448 if (patterns[i].type != DEV_MATCH_PERIPH)
1451 cur_pattern = &patterns[i].pattern.periph_pattern;
1454 * If they want to match on anything, then we will do so.
1456 if (cur_pattern->flags == PERIPH_MATCH_ANY) {
1457 /* set the copy flag */
1458 retval |= DM_RET_COPY;
1461 * We've already set the return action to stop,
1462 * since there are no nodes below peripherals in
1469 * Not sure why someone would do this...
1471 if (cur_pattern->flags == PERIPH_MATCH_NONE)
1474 if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0)
1475 && (cur_pattern->path_id != periph->path->bus->path_id))
1479 * For the target and lun id's, we have to make sure the
1480 * target and lun pointers aren't NULL. The xpt peripheral
1481 * has a wildcard target and device.
1483 if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0)
1484 && ((periph->path->target == NULL)
1485 ||(cur_pattern->target_id != periph->path->target->target_id)))
1488 if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0)
1489 && ((periph->path->device == NULL)
1490 || (cur_pattern->target_lun != periph->path->device->lun_id)))
1493 if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0)
1494 && (cur_pattern->unit_number != periph->unit_number))
1497 if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0)
1498 && (strncmp(cur_pattern->periph_name, periph->periph_name,
1503 * If we get to this point, the user definitely wants
1504 * information on this peripheral. So tell the caller to
1505 * copy the data out.
1507 retval |= DM_RET_COPY;
1510 * The return action has already been set to stop, since
1511 * peripherals don't have any nodes below them in the EDT.
1517 * If we get to this point, the peripheral that was passed in
1518 * doesn't match any of the patterns.
1524 xptedtbusfunc(struct cam_eb *bus, void *arg)
1526 struct ccb_dev_match *cdm;
1527 struct cam_et *target;
1528 dev_match_ret retval;
1530 cdm = (struct ccb_dev_match *)arg;
1533 * If our position is for something deeper in the tree, that means
1534 * that we've already seen this node. So, we keep going down.
1536 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1537 && (cdm->pos.cookie.bus == bus)
1538 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1539 && (cdm->pos.cookie.target != NULL))
1540 retval = DM_RET_DESCEND;
1542 retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus);
1545 * If we got an error, bail out of the search.
1547 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1548 cdm->status = CAM_DEV_MATCH_ERROR;
1553 * If the copy flag is set, copy this bus out.
1555 if (retval & DM_RET_COPY) {
1558 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1559 sizeof(struct dev_match_result));
1562 * If we don't have enough space to put in another
1563 * match result, save our position and tell the
1564 * user there are more devices to check.
1566 if (spaceleft < sizeof(struct dev_match_result)) {
1567 bzero(&cdm->pos, sizeof(cdm->pos));
1568 cdm->pos.position_type =
1569 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS;
1571 cdm->pos.cookie.bus = bus;
1572 cdm->pos.generations[CAM_BUS_GENERATION]=
1573 xsoftc.bus_generation;
1574 cdm->status = CAM_DEV_MATCH_MORE;
1577 j = cdm->num_matches;
1579 cdm->matches[j].type = DEV_MATCH_BUS;
1580 cdm->matches[j].result.bus_result.path_id = bus->path_id;
1581 cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id;
1582 cdm->matches[j].result.bus_result.unit_number =
1583 bus->sim->unit_number;
1584 strncpy(cdm->matches[j].result.bus_result.dev_name,
1585 bus->sim->sim_name, DEV_IDLEN);
1589 * If the user is only interested in busses, there's no
1590 * reason to descend to the next level in the tree.
1592 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1596 * If there is a target generation recorded, check it to
1597 * make sure the target list hasn't changed.
1599 mtx_lock(&bus->eb_mtx);
1600 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1601 && (cdm->pos.cookie.bus == bus)
1602 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1603 && (cdm->pos.cookie.target != NULL)) {
1604 if ((cdm->pos.generations[CAM_TARGET_GENERATION] !=
1606 mtx_unlock(&bus->eb_mtx);
1607 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1610 target = (struct cam_et *)cdm->pos.cookie.target;
1614 mtx_unlock(&bus->eb_mtx);
1616 return (xpttargettraverse(bus, target, xptedttargetfunc, arg));
1620 xptedttargetfunc(struct cam_et *target, void *arg)
1622 struct ccb_dev_match *cdm;
1624 struct cam_ed *device;
1626 cdm = (struct ccb_dev_match *)arg;
1630 * If there is a device list generation recorded, check it to
1631 * make sure the device list hasn't changed.
1633 mtx_lock(&bus->eb_mtx);
1634 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1635 && (cdm->pos.cookie.bus == bus)
1636 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1637 && (cdm->pos.cookie.target == target)
1638 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1639 && (cdm->pos.cookie.device != NULL)) {
1640 if (cdm->pos.generations[CAM_DEV_GENERATION] !=
1641 target->generation) {
1642 mtx_unlock(&bus->eb_mtx);
1643 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1646 device = (struct cam_ed *)cdm->pos.cookie.device;
1650 mtx_unlock(&bus->eb_mtx);
1652 return (xptdevicetraverse(target, device, xptedtdevicefunc, arg));
1656 xptedtdevicefunc(struct cam_ed *device, void *arg)
1659 struct cam_periph *periph;
1660 struct ccb_dev_match *cdm;
1661 dev_match_ret retval;
1663 cdm = (struct ccb_dev_match *)arg;
1664 bus = device->target->bus;
1667 * If our position is for something deeper in the tree, that means
1668 * that we've already seen this node. So, we keep going down.
1670 if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1671 && (cdm->pos.cookie.device == device)
1672 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1673 && (cdm->pos.cookie.periph != NULL))
1674 retval = DM_RET_DESCEND;
1676 retval = xptdevicematch(cdm->patterns, cdm->num_patterns,
1679 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1680 cdm->status = CAM_DEV_MATCH_ERROR;
1685 * If the copy flag is set, copy this device out.
1687 if (retval & DM_RET_COPY) {
1690 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1691 sizeof(struct dev_match_result));
1694 * If we don't have enough space to put in another
1695 * match result, save our position and tell the
1696 * user there are more devices to check.
1698 if (spaceleft < sizeof(struct dev_match_result)) {
1699 bzero(&cdm->pos, sizeof(cdm->pos));
1700 cdm->pos.position_type =
1701 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1702 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE;
1704 cdm->pos.cookie.bus = device->target->bus;
1705 cdm->pos.generations[CAM_BUS_GENERATION]=
1706 xsoftc.bus_generation;
1707 cdm->pos.cookie.target = device->target;
1708 cdm->pos.generations[CAM_TARGET_GENERATION] =
1709 device->target->bus->generation;
1710 cdm->pos.cookie.device = device;
1711 cdm->pos.generations[CAM_DEV_GENERATION] =
1712 device->target->generation;
1713 cdm->status = CAM_DEV_MATCH_MORE;
1716 j = cdm->num_matches;
1718 cdm->matches[j].type = DEV_MATCH_DEVICE;
1719 cdm->matches[j].result.device_result.path_id =
1720 device->target->bus->path_id;
1721 cdm->matches[j].result.device_result.target_id =
1722 device->target->target_id;
1723 cdm->matches[j].result.device_result.target_lun =
1725 cdm->matches[j].result.device_result.protocol =
1727 bcopy(&device->inq_data,
1728 &cdm->matches[j].result.device_result.inq_data,
1729 sizeof(struct scsi_inquiry_data));
1730 bcopy(&device->ident_data,
1731 &cdm->matches[j].result.device_result.ident_data,
1732 sizeof(struct ata_params));
1734 /* Let the user know whether this device is unconfigured */
1735 if (device->flags & CAM_DEV_UNCONFIGURED)
1736 cdm->matches[j].result.device_result.flags =
1737 DEV_RESULT_UNCONFIGURED;
1739 cdm->matches[j].result.device_result.flags =
1744 * If the user isn't interested in peripherals, don't descend
1745 * the tree any further.
1747 if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP)
1751 * If there is a peripheral list generation recorded, make sure
1752 * it hasn't changed.
1755 mtx_lock(&bus->eb_mtx);
1756 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1757 && (cdm->pos.cookie.bus == bus)
1758 && (cdm->pos.position_type & CAM_DEV_POS_TARGET)
1759 && (cdm->pos.cookie.target == device->target)
1760 && (cdm->pos.position_type & CAM_DEV_POS_DEVICE)
1761 && (cdm->pos.cookie.device == device)
1762 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1763 && (cdm->pos.cookie.periph != NULL)) {
1764 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1765 device->generation) {
1766 mtx_unlock(&bus->eb_mtx);
1768 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1771 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1775 mtx_unlock(&bus->eb_mtx);
1778 return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg));
1782 xptedtperiphfunc(struct cam_periph *periph, void *arg)
1784 struct ccb_dev_match *cdm;
1785 dev_match_ret retval;
1787 cdm = (struct ccb_dev_match *)arg;
1789 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1791 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1792 cdm->status = CAM_DEV_MATCH_ERROR;
1797 * If the copy flag is set, copy this peripheral out.
1799 if (retval & DM_RET_COPY) {
1802 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1803 sizeof(struct dev_match_result));
1806 * If we don't have enough space to put in another
1807 * match result, save our position and tell the
1808 * user there are more devices to check.
1810 if (spaceleft < sizeof(struct dev_match_result)) {
1811 bzero(&cdm->pos, sizeof(cdm->pos));
1812 cdm->pos.position_type =
1813 CAM_DEV_POS_EDT | CAM_DEV_POS_BUS |
1814 CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE |
1817 cdm->pos.cookie.bus = periph->path->bus;
1818 cdm->pos.generations[CAM_BUS_GENERATION]=
1819 xsoftc.bus_generation;
1820 cdm->pos.cookie.target = periph->path->target;
1821 cdm->pos.generations[CAM_TARGET_GENERATION] =
1822 periph->path->bus->generation;
1823 cdm->pos.cookie.device = periph->path->device;
1824 cdm->pos.generations[CAM_DEV_GENERATION] =
1825 periph->path->target->generation;
1826 cdm->pos.cookie.periph = periph;
1827 cdm->pos.generations[CAM_PERIPH_GENERATION] =
1828 periph->path->device->generation;
1829 cdm->status = CAM_DEV_MATCH_MORE;
1833 j = cdm->num_matches;
1835 cdm->matches[j].type = DEV_MATCH_PERIPH;
1836 cdm->matches[j].result.periph_result.path_id =
1837 periph->path->bus->path_id;
1838 cdm->matches[j].result.periph_result.target_id =
1839 periph->path->target->target_id;
1840 cdm->matches[j].result.periph_result.target_lun =
1841 periph->path->device->lun_id;
1842 cdm->matches[j].result.periph_result.unit_number =
1843 periph->unit_number;
1844 strncpy(cdm->matches[j].result.periph_result.periph_name,
1845 periph->periph_name, DEV_IDLEN);
1852 xptedtmatch(struct ccb_dev_match *cdm)
1857 cdm->num_matches = 0;
1860 * Check the bus list generation. If it has changed, the user
1861 * needs to reset everything and start over.
1864 if ((cdm->pos.position_type & CAM_DEV_POS_BUS)
1865 && (cdm->pos.cookie.bus != NULL)) {
1866 if (cdm->pos.generations[CAM_BUS_GENERATION] !=
1867 xsoftc.bus_generation) {
1869 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1872 bus = (struct cam_eb *)cdm->pos.cookie.bus;
1878 ret = xptbustraverse(bus, xptedtbusfunc, cdm);
1881 * If we get back 0, that means that we had to stop before fully
1882 * traversing the EDT. It also means that one of the subroutines
1883 * has set the status field to the proper value. If we get back 1,
1884 * we've fully traversed the EDT and copied out any matching entries.
1887 cdm->status = CAM_DEV_MATCH_LAST;
1893 xptplistpdrvfunc(struct periph_driver **pdrv, void *arg)
1895 struct cam_periph *periph;
1896 struct ccb_dev_match *cdm;
1898 cdm = (struct ccb_dev_match *)arg;
1901 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
1902 && (cdm->pos.cookie.pdrv == pdrv)
1903 && (cdm->pos.position_type & CAM_DEV_POS_PERIPH)
1904 && (cdm->pos.cookie.periph != NULL)) {
1905 if (cdm->pos.generations[CAM_PERIPH_GENERATION] !=
1906 (*pdrv)->generation) {
1908 cdm->status = CAM_DEV_MATCH_LIST_CHANGED;
1911 periph = (struct cam_periph *)cdm->pos.cookie.periph;
1917 return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg));
1921 xptplistperiphfunc(struct cam_periph *periph, void *arg)
1923 struct ccb_dev_match *cdm;
1924 dev_match_ret retval;
1926 cdm = (struct ccb_dev_match *)arg;
1928 retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph);
1930 if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) {
1931 cdm->status = CAM_DEV_MATCH_ERROR;
1936 * If the copy flag is set, copy this peripheral out.
1938 if (retval & DM_RET_COPY) {
1941 spaceleft = cdm->match_buf_len - (cdm->num_matches *
1942 sizeof(struct dev_match_result));
1945 * If we don't have enough space to put in another
1946 * match result, save our position and tell the
1947 * user there are more devices to check.
1949 if (spaceleft < sizeof(struct dev_match_result)) {
1950 struct periph_driver **pdrv;
1953 bzero(&cdm->pos, sizeof(cdm->pos));
1954 cdm->pos.position_type =
1955 CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR |
1959 * This may look a bit non-sensical, but it is
1960 * actually quite logical. There are very few
1961 * peripheral drivers, and bloating every peripheral
1962 * structure with a pointer back to its parent
1963 * peripheral driver linker set entry would cost
1964 * more in the long run than doing this quick lookup.
1966 for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) {
1967 if (strcmp((*pdrv)->driver_name,
1968 periph->periph_name) == 0)
1972 if (*pdrv == NULL) {
1973 cdm->status = CAM_DEV_MATCH_ERROR;
1977 cdm->pos.cookie.pdrv = pdrv;
1979 * The periph generation slot does double duty, as
1980 * does the periph pointer slot. They are used for
1981 * both edt and pdrv lookups and positioning.
1983 cdm->pos.cookie.periph = periph;
1984 cdm->pos.generations[CAM_PERIPH_GENERATION] =
1985 (*pdrv)->generation;
1986 cdm->status = CAM_DEV_MATCH_MORE;
1990 j = cdm->num_matches;
1992 cdm->matches[j].type = DEV_MATCH_PERIPH;
1993 cdm->matches[j].result.periph_result.path_id =
1994 periph->path->bus->path_id;
1997 * The transport layer peripheral doesn't have a target or
2000 if (periph->path->target)
2001 cdm->matches[j].result.periph_result.target_id =
2002 periph->path->target->target_id;
2004 cdm->matches[j].result.periph_result.target_id =
2005 CAM_TARGET_WILDCARD;
2007 if (periph->path->device)
2008 cdm->matches[j].result.periph_result.target_lun =
2009 periph->path->device->lun_id;
2011 cdm->matches[j].result.periph_result.target_lun =
2014 cdm->matches[j].result.periph_result.unit_number =
2015 periph->unit_number;
2016 strncpy(cdm->matches[j].result.periph_result.periph_name,
2017 periph->periph_name, DEV_IDLEN);
2024 xptperiphlistmatch(struct ccb_dev_match *cdm)
2028 cdm->num_matches = 0;
2031 * At this point in the edt traversal function, we check the bus
2032 * list generation to make sure that no busses have been added or
2033 * removed since the user last sent a XPT_DEV_MATCH ccb through.
2034 * For the peripheral driver list traversal function, however, we
2035 * don't have to worry about new peripheral driver types coming or
2036 * going; they're in a linker set, and therefore can't change
2037 * without a recompile.
2040 if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR)
2041 && (cdm->pos.cookie.pdrv != NULL))
2042 ret = xptpdrvtraverse(
2043 (struct periph_driver **)cdm->pos.cookie.pdrv,
2044 xptplistpdrvfunc, cdm);
2046 ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm);
2049 * If we get back 0, that means that we had to stop before fully
2050 * traversing the peripheral driver tree. It also means that one of
2051 * the subroutines has set the status field to the proper value. If
2052 * we get back 1, we've fully traversed the EDT and copied out any
2056 cdm->status = CAM_DEV_MATCH_LAST;
2062 xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg)
2064 struct cam_eb *bus, *next_bus;
2072 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
2080 for (; bus != NULL; bus = next_bus) {
2081 retval = tr_func(bus, arg);
2083 xpt_release_bus(bus);
2087 next_bus = TAILQ_NEXT(bus, links);
2089 next_bus->refcount++;
2091 xpt_release_bus(bus);
2097 xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target,
2098 xpt_targetfunc_t *tr_func, void *arg)
2100 struct cam_et *target, *next_target;
2105 target = start_target;
2107 mtx_lock(&bus->eb_mtx);
2108 target = TAILQ_FIRST(&bus->et_entries);
2109 if (target == NULL) {
2110 mtx_unlock(&bus->eb_mtx);
2114 mtx_unlock(&bus->eb_mtx);
2116 for (; target != NULL; target = next_target) {
2117 retval = tr_func(target, arg);
2119 xpt_release_target(target);
2122 mtx_lock(&bus->eb_mtx);
2123 next_target = TAILQ_NEXT(target, links);
2125 next_target->refcount++;
2126 mtx_unlock(&bus->eb_mtx);
2127 xpt_release_target(target);
2133 xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device,
2134 xpt_devicefunc_t *tr_func, void *arg)
2137 struct cam_ed *device, *next_device;
2143 device = start_device;
2145 mtx_lock(&bus->eb_mtx);
2146 device = TAILQ_FIRST(&target->ed_entries);
2147 if (device == NULL) {
2148 mtx_unlock(&bus->eb_mtx);
2152 mtx_unlock(&bus->eb_mtx);
2154 for (; device != NULL; device = next_device) {
2155 mtx_lock(&device->device_mtx);
2156 retval = tr_func(device, arg);
2157 mtx_unlock(&device->device_mtx);
2159 xpt_release_device(device);
2162 mtx_lock(&bus->eb_mtx);
2163 next_device = TAILQ_NEXT(device, links);
2165 next_device->refcount++;
2166 mtx_unlock(&bus->eb_mtx);
2167 xpt_release_device(device);
2173 xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph,
2174 xpt_periphfunc_t *tr_func, void *arg)
2177 struct cam_periph *periph, *next_periph;
2182 bus = device->target->bus;
2184 periph = start_periph;
2187 mtx_lock(&bus->eb_mtx);
2188 periph = SLIST_FIRST(&device->periphs);
2189 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2190 periph = SLIST_NEXT(periph, periph_links);
2191 if (periph == NULL) {
2192 mtx_unlock(&bus->eb_mtx);
2197 mtx_unlock(&bus->eb_mtx);
2200 for (; periph != NULL; periph = next_periph) {
2201 retval = tr_func(periph, arg);
2203 cam_periph_release_locked(periph);
2207 mtx_lock(&bus->eb_mtx);
2208 next_periph = SLIST_NEXT(periph, periph_links);
2209 while (next_periph != NULL &&
2210 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2211 next_periph = SLIST_NEXT(next_periph, periph_links);
2213 next_periph->refcount++;
2214 mtx_unlock(&bus->eb_mtx);
2216 cam_periph_release_locked(periph);
2222 xptpdrvtraverse(struct periph_driver **start_pdrv,
2223 xpt_pdrvfunc_t *tr_func, void *arg)
2225 struct periph_driver **pdrv;
2231 * We don't traverse the peripheral driver list like we do the
2232 * other lists, because it is a linker set, and therefore cannot be
2233 * changed during runtime. If the peripheral driver list is ever
2234 * re-done to be something other than a linker set (i.e. it can
2235 * change while the system is running), the list traversal should
2236 * be modified to work like the other traversal functions.
2238 for (pdrv = (start_pdrv ? start_pdrv : periph_drivers);
2239 *pdrv != NULL; pdrv++) {
2240 retval = tr_func(pdrv, arg);
2250 xptpdperiphtraverse(struct periph_driver **pdrv,
2251 struct cam_periph *start_periph,
2252 xpt_periphfunc_t *tr_func, void *arg)
2254 struct cam_periph *periph, *next_periph;
2260 periph = start_periph;
2263 periph = TAILQ_FIRST(&(*pdrv)->units);
2264 while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0)
2265 periph = TAILQ_NEXT(periph, unit_links);
2266 if (periph == NULL) {
2273 for (; periph != NULL; periph = next_periph) {
2274 cam_periph_lock(periph);
2275 retval = tr_func(periph, arg);
2276 cam_periph_unlock(periph);
2278 cam_periph_release(periph);
2282 next_periph = TAILQ_NEXT(periph, unit_links);
2283 while (next_periph != NULL &&
2284 (next_periph->flags & CAM_PERIPH_FREE) != 0)
2285 next_periph = TAILQ_NEXT(next_periph, unit_links);
2287 next_periph->refcount++;
2289 cam_periph_release(periph);
2295 xptdefbusfunc(struct cam_eb *bus, void *arg)
2297 struct xpt_traverse_config *tr_config;
2299 tr_config = (struct xpt_traverse_config *)arg;
2301 if (tr_config->depth == XPT_DEPTH_BUS) {
2302 xpt_busfunc_t *tr_func;
2304 tr_func = (xpt_busfunc_t *)tr_config->tr_func;
2306 return(tr_func(bus, tr_config->tr_arg));
2308 return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg));
2312 xptdeftargetfunc(struct cam_et *target, void *arg)
2314 struct xpt_traverse_config *tr_config;
2316 tr_config = (struct xpt_traverse_config *)arg;
2318 if (tr_config->depth == XPT_DEPTH_TARGET) {
2319 xpt_targetfunc_t *tr_func;
2321 tr_func = (xpt_targetfunc_t *)tr_config->tr_func;
2323 return(tr_func(target, tr_config->tr_arg));
2325 return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg));
2329 xptdefdevicefunc(struct cam_ed *device, void *arg)
2331 struct xpt_traverse_config *tr_config;
2333 tr_config = (struct xpt_traverse_config *)arg;
2335 if (tr_config->depth == XPT_DEPTH_DEVICE) {
2336 xpt_devicefunc_t *tr_func;
2338 tr_func = (xpt_devicefunc_t *)tr_config->tr_func;
2340 return(tr_func(device, tr_config->tr_arg));
2342 return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg));
2346 xptdefperiphfunc(struct cam_periph *periph, void *arg)
2348 struct xpt_traverse_config *tr_config;
2349 xpt_periphfunc_t *tr_func;
2351 tr_config = (struct xpt_traverse_config *)arg;
2353 tr_func = (xpt_periphfunc_t *)tr_config->tr_func;
2356 * Unlike the other default functions, we don't check for depth
2357 * here. The peripheral driver level is the last level in the EDT,
2358 * so if we're here, we should execute the function in question.
2360 return(tr_func(periph, tr_config->tr_arg));
2364 * Execute the given function for every bus in the EDT.
2367 xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg)
2369 struct xpt_traverse_config tr_config;
2371 tr_config.depth = XPT_DEPTH_BUS;
2372 tr_config.tr_func = tr_func;
2373 tr_config.tr_arg = arg;
2375 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2379 * Execute the given function for every device in the EDT.
2382 xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg)
2384 struct xpt_traverse_config tr_config;
2386 tr_config.depth = XPT_DEPTH_DEVICE;
2387 tr_config.tr_func = tr_func;
2388 tr_config.tr_arg = arg;
2390 return(xptbustraverse(NULL, xptdefbusfunc, &tr_config));
2394 xptsetasyncfunc(struct cam_ed *device, void *arg)
2396 struct cam_path path;
2397 struct ccb_getdev cgd;
2398 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2401 * Don't report unconfigured devices (Wildcard devs,
2402 * devices only for target mode, device instances
2403 * that have been invalidated but are waiting for
2404 * their last reference count to be released).
2406 if ((device->flags & CAM_DEV_UNCONFIGURED) != 0)
2409 xpt_compile_path(&path,
2411 device->target->bus->path_id,
2412 device->target->target_id,
2414 xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL);
2415 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
2416 xpt_action((union ccb *)&cgd);
2417 csa->callback(csa->callback_arg,
2420 xpt_release_path(&path);
2426 xptsetasyncbusfunc(struct cam_eb *bus, void *arg)
2428 struct cam_path path;
2429 struct ccb_pathinq cpi;
2430 struct ccb_setasync *csa = (struct ccb_setasync *)arg;
2432 xpt_compile_path(&path, /*periph*/NULL,
2434 CAM_TARGET_WILDCARD,
2436 xpt_path_lock(&path);
2437 xpt_setup_ccb(&cpi.ccb_h, &path, CAM_PRIORITY_NORMAL);
2438 cpi.ccb_h.func_code = XPT_PATH_INQ;
2439 xpt_action((union ccb *)&cpi);
2440 csa->callback(csa->callback_arg,
2443 xpt_path_unlock(&path);
2444 xpt_release_path(&path);
2450 xpt_action(union ccb *start_ccb)
2453 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE,
2454 ("xpt_action: func=%#x\n", start_ccb->ccb_h.func_code));
2456 start_ccb->ccb_h.status = CAM_REQ_INPROG;
2457 (*(start_ccb->ccb_h.path->bus->xport->action))(start_ccb);
2461 xpt_action_default(union ccb *start_ccb)
2463 struct cam_path *path;
2464 struct cam_sim *sim;
2467 path = start_ccb->ccb_h.path;
2468 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2469 ("xpt_action_default: func=%#x\n", start_ccb->ccb_h.func_code));
2471 switch (start_ccb->ccb_h.func_code) {
2474 struct cam_ed *device;
2477 * For the sake of compatibility with SCSI-1
2478 * devices that may not understand the identify
2479 * message, we include lun information in the
2480 * second byte of all commands. SCSI-1 specifies
2481 * that luns are a 3 bit value and reserves only 3
2482 * bits for lun information in the CDB. Later
2483 * revisions of the SCSI spec allow for more than 8
2484 * luns, but have deprecated lun information in the
2485 * CDB. So, if the lun won't fit, we must omit.
2487 * Also be aware that during initial probing for devices,
2488 * the inquiry information is unknown but initialized to 0.
2489 * This means that this code will be exercised while probing
2490 * devices with an ANSI revision greater than 2.
2492 device = path->device;
2493 if (device->protocol_version <= SCSI_REV_2
2494 && start_ccb->ccb_h.target_lun < 8
2495 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) {
2497 start_ccb->csio.cdb_io.cdb_bytes[1] |=
2498 start_ccb->ccb_h.target_lun << 5;
2500 start_ccb->csio.scsi_status = SCSI_STATUS_OK;
2504 case XPT_CONT_TARGET_IO:
2505 start_ccb->csio.sense_resid = 0;
2506 start_ccb->csio.resid = 0;
2509 if (start_ccb->ccb_h.func_code == XPT_ATA_IO)
2510 start_ccb->ataio.resid = 0;
2516 struct cam_devq *devq;
2518 devq = path->bus->sim->devq;
2519 mtx_lock(&devq->send_mtx);
2520 cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb);
2521 if (xpt_schedule_devq(devq, path->device) != 0)
2523 mtx_unlock(&devq->send_mtx);
2526 case XPT_CALC_GEOMETRY:
2527 /* Filter out garbage */
2528 if (start_ccb->ccg.block_size == 0
2529 || start_ccb->ccg.volume_size == 0) {
2530 start_ccb->ccg.cylinders = 0;
2531 start_ccb->ccg.heads = 0;
2532 start_ccb->ccg.secs_per_track = 0;
2533 start_ccb->ccb_h.status = CAM_REQ_CMP;
2536 #if defined(PC98) || defined(__sparc64__)
2538 * In a PC-98 system, geometry translation depens on
2539 * the "real" device geometry obtained from mode page 4.
2540 * SCSI geometry translation is performed in the
2541 * initialization routine of the SCSI BIOS and the result
2542 * stored in host memory. If the translation is available
2543 * in host memory, use it. If not, rely on the default
2544 * translation the device driver performs.
2545 * For sparc64, we may need adjust the geometry of large
2546 * disks in order to fit the limitations of the 16-bit
2547 * fields of the VTOC8 disk label.
2549 if (scsi_da_bios_params(&start_ccb->ccg) != 0) {
2550 start_ccb->ccb_h.status = CAM_REQ_CMP;
2557 union ccb* abort_ccb;
2559 abort_ccb = start_ccb->cab.abort_ccb;
2560 if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) {
2562 if (abort_ccb->ccb_h.pinfo.index >= 0) {
2563 struct cam_ccbq *ccbq;
2564 struct cam_ed *device;
2566 device = abort_ccb->ccb_h.path->device;
2567 ccbq = &device->ccbq;
2568 cam_ccbq_remove_ccb(ccbq, abort_ccb);
2569 abort_ccb->ccb_h.status =
2570 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2571 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2572 xpt_done(abort_ccb);
2573 start_ccb->ccb_h.status = CAM_REQ_CMP;
2576 if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX
2577 && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) {
2579 * We've caught this ccb en route to
2580 * the SIM. Flag it for abort and the
2581 * SIM will do so just before starting
2582 * real work on the CCB.
2584 abort_ccb->ccb_h.status =
2585 CAM_REQ_ABORTED|CAM_DEV_QFRZN;
2586 xpt_freeze_devq(abort_ccb->ccb_h.path, 1);
2587 start_ccb->ccb_h.status = CAM_REQ_CMP;
2591 if (XPT_FC_IS_QUEUED(abort_ccb)
2592 && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) {
2594 * It's already completed but waiting
2595 * for our SWI to get to it.
2597 start_ccb->ccb_h.status = CAM_UA_ABORT;
2601 * If we weren't able to take care of the abort request
2602 * in the XPT, pass the request down to the SIM for processing.
2606 case XPT_ACCEPT_TARGET_IO:
2608 case XPT_IMMED_NOTIFY:
2609 case XPT_NOTIFY_ACK:
2611 case XPT_IMMEDIATE_NOTIFY:
2612 case XPT_NOTIFY_ACKNOWLEDGE:
2613 case XPT_GET_SIM_KNOB:
2614 case XPT_SET_SIM_KNOB:
2615 case XPT_GET_TRAN_SETTINGS:
2616 case XPT_SET_TRAN_SETTINGS:
2619 sim = path->bus->sim;
2620 lock = (mtx_owned(sim->mtx) == 0);
2623 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2624 ("sim->sim_action: func=%#x\n", start_ccb->ccb_h.func_code));
2625 (*(sim->sim_action))(sim, start_ccb);
2626 CAM_DEBUG(path, CAM_DEBUG_TRACE,
2627 ("sim->sim_action: status=%#x\n", start_ccb->ccb_h.status));
2629 CAM_SIM_UNLOCK(sim);
2631 case XPT_PATH_STATS:
2632 start_ccb->cpis.last_reset = path->bus->last_reset;
2633 start_ccb->ccb_h.status = CAM_REQ_CMP;
2640 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2641 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2643 struct ccb_getdev *cgd;
2645 cgd = &start_ccb->cgd;
2646 cgd->protocol = dev->protocol;
2647 cgd->inq_data = dev->inq_data;
2648 cgd->ident_data = dev->ident_data;
2649 cgd->inq_flags = dev->inq_flags;
2650 cgd->ccb_h.status = CAM_REQ_CMP;
2651 cgd->serial_num_len = dev->serial_num_len;
2652 if ((dev->serial_num_len > 0)
2653 && (dev->serial_num != NULL))
2654 bcopy(dev->serial_num, cgd->serial_num,
2655 dev->serial_num_len);
2659 case XPT_GDEV_STATS:
2664 if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) {
2665 start_ccb->ccb_h.status = CAM_DEV_NOT_THERE;
2667 struct ccb_getdevstats *cgds;
2670 struct cam_devq *devq;
2672 cgds = &start_ccb->cgds;
2675 devq = bus->sim->devq;
2676 mtx_lock(&devq->send_mtx);
2677 cgds->dev_openings = dev->ccbq.dev_openings;
2678 cgds->dev_active = dev->ccbq.dev_active;
2679 cgds->allocated = dev->ccbq.allocated;
2680 cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq);
2681 cgds->held = cgds->allocated - cgds->dev_active -
2683 cgds->last_reset = tar->last_reset;
2684 cgds->maxtags = dev->maxtags;
2685 cgds->mintags = dev->mintags;
2686 if (timevalcmp(&tar->last_reset, &bus->last_reset, <))
2687 cgds->last_reset = bus->last_reset;
2688 mtx_unlock(&devq->send_mtx);
2689 cgds->ccb_h.status = CAM_REQ_CMP;
2695 struct cam_periph *nperiph;
2696 struct periph_list *periph_head;
2697 struct ccb_getdevlist *cgdl;
2699 struct cam_ed *device;
2706 * Don't want anyone mucking with our data.
2708 device = path->device;
2709 periph_head = &device->periphs;
2710 cgdl = &start_ccb->cgdl;
2713 * Check and see if the list has changed since the user
2714 * last requested a list member. If so, tell them that the
2715 * list has changed, and therefore they need to start over
2716 * from the beginning.
2718 if ((cgdl->index != 0) &&
2719 (cgdl->generation != device->generation)) {
2720 cgdl->status = CAM_GDEVLIST_LIST_CHANGED;
2725 * Traverse the list of peripherals and attempt to find
2726 * the requested peripheral.
2728 for (nperiph = SLIST_FIRST(periph_head), i = 0;
2729 (nperiph != NULL) && (i <= cgdl->index);
2730 nperiph = SLIST_NEXT(nperiph, periph_links), i++) {
2731 if (i == cgdl->index) {
2732 strncpy(cgdl->periph_name,
2733 nperiph->periph_name,
2735 cgdl->unit_number = nperiph->unit_number;
2740 cgdl->status = CAM_GDEVLIST_ERROR;
2744 if (nperiph == NULL)
2745 cgdl->status = CAM_GDEVLIST_LAST_DEVICE;
2747 cgdl->status = CAM_GDEVLIST_MORE_DEVS;
2750 cgdl->generation = device->generation;
2752 cgdl->ccb_h.status = CAM_REQ_CMP;
2757 dev_pos_type position_type;
2758 struct ccb_dev_match *cdm;
2760 cdm = &start_ccb->cdm;
2763 * There are two ways of getting at information in the EDT.
2764 * The first way is via the primary EDT tree. It starts
2765 * with a list of busses, then a list of targets on a bus,
2766 * then devices/luns on a target, and then peripherals on a
2767 * device/lun. The "other" way is by the peripheral driver
2768 * lists. The peripheral driver lists are organized by
2769 * peripheral driver. (obviously) So it makes sense to
2770 * use the peripheral driver list if the user is looking
2771 * for something like "da1", or all "da" devices. If the
2772 * user is looking for something on a particular bus/target
2773 * or lun, it's generally better to go through the EDT tree.
2776 if (cdm->pos.position_type != CAM_DEV_POS_NONE)
2777 position_type = cdm->pos.position_type;
2781 position_type = CAM_DEV_POS_NONE;
2783 for (i = 0; i < cdm->num_patterns; i++) {
2784 if ((cdm->patterns[i].type == DEV_MATCH_BUS)
2785 ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){
2786 position_type = CAM_DEV_POS_EDT;
2791 if (cdm->num_patterns == 0)
2792 position_type = CAM_DEV_POS_EDT;
2793 else if (position_type == CAM_DEV_POS_NONE)
2794 position_type = CAM_DEV_POS_PDRV;
2797 switch(position_type & CAM_DEV_POS_TYPEMASK) {
2798 case CAM_DEV_POS_EDT:
2801 case CAM_DEV_POS_PDRV:
2802 xptperiphlistmatch(cdm);
2805 cdm->status = CAM_DEV_MATCH_ERROR;
2809 if (cdm->status == CAM_DEV_MATCH_ERROR)
2810 start_ccb->ccb_h.status = CAM_REQ_CMP_ERR;
2812 start_ccb->ccb_h.status = CAM_REQ_CMP;
2818 struct ccb_setasync *csa;
2819 struct async_node *cur_entry;
2820 struct async_list *async_head;
2823 csa = &start_ccb->csa;
2824 added = csa->event_enable;
2825 async_head = &path->device->asyncs;
2828 * If there is already an entry for us, simply
2831 cur_entry = SLIST_FIRST(async_head);
2832 while (cur_entry != NULL) {
2833 if ((cur_entry->callback_arg == csa->callback_arg)
2834 && (cur_entry->callback == csa->callback))
2836 cur_entry = SLIST_NEXT(cur_entry, links);
2839 if (cur_entry != NULL) {
2841 * If the request has no flags set,
2844 added &= ~cur_entry->event_enable;
2845 if (csa->event_enable == 0) {
2846 SLIST_REMOVE(async_head, cur_entry,
2848 xpt_release_device(path->device);
2849 free(cur_entry, M_CAMXPT);
2851 cur_entry->event_enable = csa->event_enable;
2853 csa->event_enable = added;
2855 cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT,
2857 if (cur_entry == NULL) {
2858 csa->ccb_h.status = CAM_RESRC_UNAVAIL;
2861 cur_entry->event_enable = csa->event_enable;
2862 cur_entry->event_lock =
2863 mtx_owned(path->bus->sim->mtx) ? 1 : 0;
2864 cur_entry->callback_arg = csa->callback_arg;
2865 cur_entry->callback = csa->callback;
2866 SLIST_INSERT_HEAD(async_head, cur_entry, links);
2867 xpt_acquire_device(path->device);
2869 start_ccb->ccb_h.status = CAM_REQ_CMP;
2874 struct ccb_relsim *crs;
2877 crs = &start_ccb->crs;
2881 crs->ccb_h.status = CAM_DEV_NOT_THERE;
2885 if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) {
2887 /* Don't ever go below one opening */
2888 if (crs->openings > 0) {
2889 xpt_dev_ccbq_resize(path, crs->openings);
2892 "number of openings is now %d\n",
2898 mtx_lock(&dev->sim->devq->send_mtx);
2899 if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) {
2901 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
2904 * Just extend the old timeout and decrement
2905 * the freeze count so that a single timeout
2906 * is sufficient for releasing the queue.
2908 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2909 callout_stop(&dev->callout);
2912 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2915 callout_reset_sbt(&dev->callout,
2916 SBT_1MS * crs->release_timeout, 0,
2917 xpt_release_devq_timeout, dev, 0);
2919 dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING;
2923 if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) {
2925 if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) {
2927 * Decrement the freeze count so that a single
2928 * completion is still sufficient to unfreeze
2931 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2934 dev->flags |= CAM_DEV_REL_ON_COMPLETE;
2935 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2939 if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) {
2941 if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
2942 || (dev->ccbq.dev_active == 0)) {
2944 start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE;
2947 dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY;
2948 start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
2951 mtx_unlock(&dev->sim->devq->send_mtx);
2953 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0)
2954 xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE);
2955 start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt;
2956 start_ccb->ccb_h.status = CAM_REQ_CMP;
2960 struct cam_path *oldpath;
2962 /* Check that all request bits are supported. */
2963 if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) {
2964 start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
2968 cam_dflags = CAM_DEBUG_NONE;
2969 if (cam_dpath != NULL) {
2970 oldpath = cam_dpath;
2972 xpt_free_path(oldpath);
2974 if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) {
2975 if (xpt_create_path(&cam_dpath, NULL,
2976 start_ccb->ccb_h.path_id,
2977 start_ccb->ccb_h.target_id,
2978 start_ccb->ccb_h.target_lun) !=
2980 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
2982 cam_dflags = start_ccb->cdbg.flags;
2983 start_ccb->ccb_h.status = CAM_REQ_CMP;
2984 xpt_print(cam_dpath, "debugging flags now %x\n",
2988 start_ccb->ccb_h.status = CAM_REQ_CMP;
2992 if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0)
2993 xpt_freeze_devq(path, 1);
2994 start_ccb->ccb_h.status = CAM_REQ_CMP;
3001 printf("%s: CCB type %#x not supported\n", __func__,
3002 start_ccb->ccb_h.func_code);
3003 start_ccb->ccb_h.status = CAM_PROVIDE_FAIL;
3004 if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) {
3005 xpt_done(start_ccb);
3012 xpt_polled_action(union ccb *start_ccb)
3015 struct cam_sim *sim;
3016 struct cam_devq *devq;
3019 timeout = start_ccb->ccb_h.timeout * 10;
3020 sim = start_ccb->ccb_h.path->bus->sim;
3022 dev = start_ccb->ccb_h.path->device;
3024 mtx_unlock(&dev->device_mtx);
3027 * Steal an opening so that no other queued requests
3028 * can get it before us while we simulate interrupts.
3030 mtx_lock(&devq->send_mtx);
3031 dev->ccbq.dev_openings--;
3032 while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) &&
3034 mtx_unlock(&devq->send_mtx);
3037 (*(sim->sim_poll))(sim);
3038 CAM_SIM_UNLOCK(sim);
3040 mtx_lock(&devq->send_mtx);
3042 dev->ccbq.dev_openings++;
3043 mtx_unlock(&devq->send_mtx);
3046 xpt_action(start_ccb);
3047 while(--timeout > 0) {
3049 (*(sim->sim_poll))(sim);
3050 CAM_SIM_UNLOCK(sim);
3052 if ((start_ccb->ccb_h.status & CAM_STATUS_MASK)
3059 * XXX Is it worth adding a sim_timeout entry
3060 * point so we can attempt recovery? If
3061 * this is only used for dumps, I don't think
3064 start_ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3067 start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
3070 mtx_lock(&dev->device_mtx);
3074 * Schedule a peripheral driver to receive a ccb when its
3075 * target device has space for more transactions.
3078 xpt_schedule(struct cam_periph *periph, u_int32_t new_priority)
3081 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n"));
3082 cam_periph_assert(periph, MA_OWNED);
3083 if (new_priority < periph->scheduled_priority) {
3084 periph->scheduled_priority = new_priority;
3085 xpt_run_allocq(periph, 0);
3091 * Schedule a device to run on a given queue.
3092 * If the device was inserted as a new entry on the queue,
3093 * return 1 meaning the device queue should be run. If we
3094 * were already queued, implying someone else has already
3095 * started the queue, return 0 so the caller doesn't attempt
3099 xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo,
3100 u_int32_t new_priority)
3103 u_int32_t old_priority;
3105 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n"));
3107 old_priority = pinfo->priority;
3110 * Are we already queued?
3112 if (pinfo->index != CAM_UNQUEUED_INDEX) {
3113 /* Simply reorder based on new priority */
3114 if (new_priority < old_priority) {
3115 camq_change_priority(queue, pinfo->index,
3117 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3118 ("changed priority to %d\n",
3124 /* New entry on the queue */
3125 if (new_priority < old_priority)
3126 pinfo->priority = new_priority;
3128 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3129 ("Inserting onto queue\n"));
3130 pinfo->generation = ++queue->generation;
3131 camq_insert(queue, pinfo);
3138 xpt_run_allocq_task(void *context, int pending)
3140 struct cam_periph *periph = context;
3142 cam_periph_lock(periph);
3143 periph->flags &= ~CAM_PERIPH_RUN_TASK;
3144 xpt_run_allocq(periph, 1);
3145 cam_periph_unlock(periph);
3146 cam_periph_release(periph);
3150 xpt_run_allocq(struct cam_periph *periph, int sleep)
3152 struct cam_ed *device;
3156 cam_periph_assert(periph, MA_OWNED);
3157 if (periph->periph_allocating)
3159 periph->periph_allocating = 1;
3160 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph));
3161 device = periph->path->device;
3164 while ((prio = min(periph->scheduled_priority,
3165 periph->immediate_priority)) != CAM_PRIORITY_NONE &&
3166 (periph->periph_allocated - (ccb != NULL ? 1 : 0) <
3167 device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) {
3170 (ccb = xpt_get_ccb_nowait(periph)) == NULL) {
3172 ccb = xpt_get_ccb(periph);
3175 if (periph->flags & CAM_PERIPH_RUN_TASK)
3177 cam_periph_doacquire(periph);
3178 periph->flags |= CAM_PERIPH_RUN_TASK;
3179 taskqueue_enqueue(xsoftc.xpt_taskq,
3180 &periph->periph_run_task);
3183 xpt_setup_ccb(&ccb->ccb_h, periph->path, prio);
3184 if (prio == periph->immediate_priority) {
3185 periph->immediate_priority = CAM_PRIORITY_NONE;
3186 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3187 ("waking cam_periph_getccb()\n"));
3188 SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h,
3190 wakeup(&periph->ccb_list);
3192 periph->scheduled_priority = CAM_PRIORITY_NONE;
3193 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3194 ("calling periph_start()\n"));
3195 periph->periph_start(periph, ccb);
3200 xpt_release_ccb(ccb);
3201 periph->periph_allocating = 0;
3205 xpt_run_devq(struct cam_devq *devq)
3207 char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
3210 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n"));
3212 devq->send_queue.qfrozen_cnt++;
3213 while ((devq->send_queue.entries > 0)
3214 && (devq->send_openings > 0)
3215 && (devq->send_queue.qfrozen_cnt <= 1)) {
3216 struct cam_ed *device;
3217 union ccb *work_ccb;
3218 struct cam_sim *sim;
3220 device = (struct cam_ed *)camq_remove(&devq->send_queue,
3222 CAM_DEBUG_PRINT(CAM_DEBUG_XPT,
3223 ("running device %p\n", device));
3225 work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD);
3226 if (work_ccb == NULL) {
3227 printf("device on run queue with no ccbs???\n");
3231 if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) {
3233 mtx_lock(&xsoftc.xpt_highpower_lock);
3234 if (xsoftc.num_highpower <= 0) {
3236 * We got a high power command, but we
3237 * don't have any available slots. Freeze
3238 * the device queue until we have a slot
3241 xpt_freeze_devq_device(device, 1);
3242 STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device,
3245 mtx_unlock(&xsoftc.xpt_highpower_lock);
3249 * Consume a high power slot while
3252 xsoftc.num_highpower--;
3254 mtx_unlock(&xsoftc.xpt_highpower_lock);
3256 cam_ccbq_remove_ccb(&device->ccbq, work_ccb);
3257 cam_ccbq_send_ccb(&device->ccbq, work_ccb);
3258 devq->send_openings--;
3259 devq->send_active++;
3260 xpt_schedule_devq(devq, device);
3261 mtx_unlock(&devq->send_mtx);
3263 if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) {
3265 * The client wants to freeze the queue
3266 * after this CCB is sent.
3268 xpt_freeze_devq(work_ccb->ccb_h.path, 1);
3271 /* In Target mode, the peripheral driver knows best... */
3272 if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) {
3273 if ((device->inq_flags & SID_CmdQue) != 0
3274 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE)
3275 work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID;
3278 * Clear this in case of a retried CCB that
3279 * failed due to a rejected tag.
3281 work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
3284 switch (work_ccb->ccb_h.func_code) {
3286 CAM_DEBUG(work_ccb->ccb_h.path,
3287 CAM_DEBUG_CDB,("%s. CDB: %s\n",
3288 scsi_op_desc(work_ccb->csio.cdb_io.cdb_bytes[0],
3290 scsi_cdb_string(work_ccb->csio.cdb_io.cdb_bytes,
3291 cdb_str, sizeof(cdb_str))));
3294 CAM_DEBUG(work_ccb->ccb_h.path,
3295 CAM_DEBUG_CDB,("%s. ACB: %s\n",
3296 ata_op_string(&work_ccb->ataio.cmd),
3297 ata_cmd_string(&work_ccb->ataio.cmd,
3298 cdb_str, sizeof(cdb_str))));
3305 * Device queues can be shared among multiple SIM instances
3306 * that reside on different busses. Use the SIM from the
3307 * queued device, rather than the one from the calling bus.
3310 lock = (mtx_owned(sim->mtx) == 0);
3313 (*(sim->sim_action))(sim, work_ccb);
3315 CAM_SIM_UNLOCK(sim);
3316 mtx_lock(&devq->send_mtx);
3318 devq->send_queue.qfrozen_cnt--;
3322 * This function merges stuff from the slave ccb into the master ccb, while
3323 * keeping important fields in the master ccb constant.
3326 xpt_merge_ccb(union ccb *master_ccb, union ccb *slave_ccb)
3330 * Pull fields that are valid for peripheral drivers to set
3331 * into the master CCB along with the CCB "payload".
3333 master_ccb->ccb_h.retry_count = slave_ccb->ccb_h.retry_count;
3334 master_ccb->ccb_h.func_code = slave_ccb->ccb_h.func_code;
3335 master_ccb->ccb_h.timeout = slave_ccb->ccb_h.timeout;
3336 master_ccb->ccb_h.flags = slave_ccb->ccb_h.flags;
3337 bcopy(&(&slave_ccb->ccb_h)[1], &(&master_ccb->ccb_h)[1],
3338 sizeof(union ccb) - sizeof(struct ccb_hdr));
3342 xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path,
3343 u_int32_t priority, u_int32_t flags)
3346 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n"));
3347 ccb_h->pinfo.priority = priority;
3349 ccb_h->path_id = path->bus->path_id;
3351 ccb_h->target_id = path->target->target_id;
3353 ccb_h->target_id = CAM_TARGET_WILDCARD;
3355 ccb_h->target_lun = path->device->lun_id;
3356 ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation;
3358 ccb_h->target_lun = CAM_TARGET_WILDCARD;
3360 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
3361 ccb_h->flags = flags;
3366 xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority)
3368 xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0);
3371 /* Path manipulation functions */
3373 xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph,
3374 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3376 struct cam_path *path;
3379 path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3382 status = CAM_RESRC_UNAVAIL;
3385 status = xpt_compile_path(path, perph, path_id, target_id, lun_id);
3386 if (status != CAM_REQ_CMP) {
3387 free(path, M_CAMPATH);
3390 *new_path_ptr = path;
3395 xpt_create_path_unlocked(struct cam_path **new_path_ptr,
3396 struct cam_periph *periph, path_id_t path_id,
3397 target_id_t target_id, lun_id_t lun_id)
3400 return (xpt_create_path(new_path_ptr, periph, path_id, target_id,
3405 xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph,
3406 path_id_t path_id, target_id_t target_id, lun_id_t lun_id)
3409 struct cam_et *target;
3410 struct cam_ed *device;
3413 status = CAM_REQ_CMP; /* Completed without error */
3414 target = NULL; /* Wildcarded */
3415 device = NULL; /* Wildcarded */
3418 * We will potentially modify the EDT, so block interrupts
3419 * that may attempt to create cam paths.
3421 bus = xpt_find_bus(path_id);
3423 status = CAM_PATH_INVALID;
3426 mtx_lock(&bus->eb_mtx);
3427 target = xpt_find_target(bus, target_id);
3428 if (target == NULL) {
3430 struct cam_et *new_target;
3432 new_target = xpt_alloc_target(bus, target_id);
3433 if (new_target == NULL) {
3434 status = CAM_RESRC_UNAVAIL;
3436 target = new_target;
3440 if (target != NULL) {
3441 device = xpt_find_device(target, lun_id);
3442 if (device == NULL) {
3444 struct cam_ed *new_device;
3447 (*(bus->xport->alloc_device))(bus,
3450 if (new_device == NULL) {
3451 status = CAM_RESRC_UNAVAIL;
3453 device = new_device;
3457 mtx_unlock(&bus->eb_mtx);
3461 * Only touch the user's data if we are successful.
3463 if (status == CAM_REQ_CMP) {
3464 new_path->periph = perph;
3465 new_path->bus = bus;
3466 new_path->target = target;
3467 new_path->device = device;
3468 CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n"));
3471 xpt_release_device(device);
3473 xpt_release_target(target);
3475 xpt_release_bus(bus);
3481 xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path)
3483 struct cam_path *new_path;
3485 new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT);
3486 if (new_path == NULL)
3487 return(CAM_RESRC_UNAVAIL);
3488 xpt_copy_path(new_path, path);
3489 *new_path_ptr = new_path;
3490 return (CAM_REQ_CMP);
3494 xpt_copy_path(struct cam_path *new_path, struct cam_path *path)
3498 if (path->bus != NULL)
3499 xpt_acquire_bus(path->bus);
3500 if (path->target != NULL)
3501 xpt_acquire_target(path->target);
3502 if (path->device != NULL)
3503 xpt_acquire_device(path->device);
3507 xpt_release_path(struct cam_path *path)
3509 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n"));
3510 if (path->device != NULL) {
3511 xpt_release_device(path->device);
3512 path->device = NULL;
3514 if (path->target != NULL) {
3515 xpt_release_target(path->target);
3516 path->target = NULL;
3518 if (path->bus != NULL) {
3519 xpt_release_bus(path->bus);
3525 xpt_free_path(struct cam_path *path)
3528 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n"));
3529 xpt_release_path(path);
3530 free(path, M_CAMPATH);
3534 xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
3535 uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref)
3541 *bus_ref = path->bus->refcount;
3547 *periph_ref = path->periph->refcount;
3554 *target_ref = path->target->refcount;
3560 *device_ref = path->device->refcount;
3567 * Return -1 for failure, 0 for exact match, 1 for match with wildcards
3568 * in path1, 2 for match with wildcards in path2.
3571 xpt_path_comp(struct cam_path *path1, struct cam_path *path2)
3575 if (path1->bus != path2->bus) {
3576 if (path1->bus->path_id == CAM_BUS_WILDCARD)
3578 else if (path2->bus->path_id == CAM_BUS_WILDCARD)
3583 if (path1->target != path2->target) {
3584 if (path1->target->target_id == CAM_TARGET_WILDCARD) {
3587 } else if (path2->target->target_id == CAM_TARGET_WILDCARD)
3592 if (path1->device != path2->device) {
3593 if (path1->device->lun_id == CAM_LUN_WILDCARD) {
3596 } else if (path2->device->lun_id == CAM_LUN_WILDCARD)
3605 xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev)
3609 if (path->bus != dev->target->bus) {
3610 if (path->bus->path_id == CAM_BUS_WILDCARD)
3612 else if (dev->target->bus->path_id == CAM_BUS_WILDCARD)
3617 if (path->target != dev->target) {
3618 if (path->target->target_id == CAM_TARGET_WILDCARD) {
3621 } else if (dev->target->target_id == CAM_TARGET_WILDCARD)
3626 if (path->device != dev) {
3627 if (path->device->lun_id == CAM_LUN_WILDCARD) {
3630 } else if (dev->lun_id == CAM_LUN_WILDCARD)
3639 xpt_print_path(struct cam_path *path)
3643 printf("(nopath): ");
3645 if (path->periph != NULL)
3646 printf("(%s%d:", path->periph->periph_name,
3647 path->periph->unit_number);
3649 printf("(noperiph:");
3651 if (path->bus != NULL)
3652 printf("%s%d:%d:", path->bus->sim->sim_name,
3653 path->bus->sim->unit_number,
3654 path->bus->sim->bus_id);
3658 if (path->target != NULL)
3659 printf("%d:", path->target->target_id);
3663 if (path->device != NULL)
3664 printf("%jx): ", (uintmax_t)path->device->lun_id);
3671 xpt_print_device(struct cam_ed *device)
3675 printf("(nopath): ");
3677 printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name,
3678 device->sim->unit_number,
3679 device->sim->bus_id,
3680 device->target->target_id,
3681 (uintmax_t)device->lun_id);
3686 xpt_print(struct cam_path *path, const char *fmt, ...)
3689 xpt_print_path(path);
3696 xpt_path_string(struct cam_path *path, char *str, size_t str_len)
3700 sbuf_new(&sb, str, str_len, 0);
3703 sbuf_printf(&sb, "(nopath): ");
3705 if (path->periph != NULL)
3706 sbuf_printf(&sb, "(%s%d:", path->periph->periph_name,
3707 path->periph->unit_number);
3709 sbuf_printf(&sb, "(noperiph:");
3711 if (path->bus != NULL)
3712 sbuf_printf(&sb, "%s%d:%d:", path->bus->sim->sim_name,
3713 path->bus->sim->unit_number,
3714 path->bus->sim->bus_id);
3716 sbuf_printf(&sb, "nobus:");
3718 if (path->target != NULL)
3719 sbuf_printf(&sb, "%d:", path->target->target_id);
3721 sbuf_printf(&sb, "X:");
3723 if (path->device != NULL)
3724 sbuf_printf(&sb, "%jx): ",
3725 (uintmax_t)path->device->lun_id);
3727 sbuf_printf(&sb, "X): ");
3731 return(sbuf_len(&sb));
3735 xpt_path_path_id(struct cam_path *path)
3737 return(path->bus->path_id);
3741 xpt_path_target_id(struct cam_path *path)
3743 if (path->target != NULL)
3744 return (path->target->target_id);
3746 return (CAM_TARGET_WILDCARD);
3750 xpt_path_lun_id(struct cam_path *path)
3752 if (path->device != NULL)
3753 return (path->device->lun_id);
3755 return (CAM_LUN_WILDCARD);
3759 xpt_path_sim(struct cam_path *path)
3762 return (path->bus->sim);
3766 xpt_path_periph(struct cam_path *path)
3769 return (path->periph);
3773 * Release a CAM control block for the caller. Remit the cost of the structure
3774 * to the device referenced by the path. If the this device had no 'credits'
3775 * and peripheral drivers have registered async callbacks for this notification
3779 xpt_release_ccb(union ccb *free_ccb)
3781 struct cam_ed *device;
3782 struct cam_periph *periph;
3784 CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n"));
3785 xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED);
3786 device = free_ccb->ccb_h.path->device;
3787 periph = free_ccb->ccb_h.path->periph;
3789 xpt_free_ccb(free_ccb);
3790 periph->periph_allocated--;
3791 cam_ccbq_release_opening(&device->ccbq);
3792 xpt_run_allocq(periph, 0);
3795 /* Functions accessed by SIM drivers */
3797 static struct xpt_xport xport_default = {
3798 .alloc_device = xpt_alloc_device_default,
3799 .action = xpt_action_default,
3800 .async = xpt_dev_async_default,
3804 * A sim structure, listing the SIM entry points and instance
3805 * identification info is passed to xpt_bus_register to hook the SIM
3806 * into the CAM framework. xpt_bus_register creates a cam_eb entry
3807 * for this new bus and places it in the array of busses and assigns
3808 * it a path_id. The path_id may be influenced by "hard wiring"
3809 * information specified by the user. Once interrupt services are
3810 * available, the bus will be probed.
3813 xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus)
3815 struct cam_eb *new_bus;
3816 struct cam_eb *old_bus;
3817 struct ccb_pathinq cpi;
3818 struct cam_path *path;
3821 mtx_assert(sim->mtx, MA_OWNED);
3824 new_bus = (struct cam_eb *)malloc(sizeof(*new_bus),
3825 M_CAMXPT, M_NOWAIT|M_ZERO);
3826 if (new_bus == NULL) {
3827 /* Couldn't satisfy request */
3828 return (CAM_RESRC_UNAVAIL);
3831 mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF);
3832 TAILQ_INIT(&new_bus->et_entries);
3835 timevalclear(&new_bus->last_reset);
3837 new_bus->refcount = 1; /* Held until a bus_deregister event */
3838 new_bus->generation = 0;
3841 sim->path_id = new_bus->path_id =
3842 xptpathid(sim->sim_name, sim->unit_number, sim->bus_id);
3843 old_bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3844 while (old_bus != NULL
3845 && old_bus->path_id < new_bus->path_id)
3846 old_bus = TAILQ_NEXT(old_bus, links);
3847 if (old_bus != NULL)
3848 TAILQ_INSERT_BEFORE(old_bus, new_bus, links);
3850 TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links);
3851 xsoftc.bus_generation++;
3855 * Set a default transport so that a PATH_INQ can be issued to
3856 * the SIM. This will then allow for probing and attaching of
3857 * a more appropriate transport.
3859 new_bus->xport = &xport_default;
3861 status = xpt_create_path(&path, /*periph*/NULL, sim->path_id,
3862 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3863 if (status != CAM_REQ_CMP) {
3864 xpt_release_bus(new_bus);
3865 free(path, M_CAMXPT);
3866 return (CAM_RESRC_UNAVAIL);
3869 xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL);
3870 cpi.ccb_h.func_code = XPT_PATH_INQ;
3871 xpt_action((union ccb *)&cpi);
3873 if (cpi.ccb_h.status == CAM_REQ_CMP) {
3874 switch (cpi.transport) {
3882 new_bus->xport = scsi_get_xport();
3886 new_bus->xport = ata_get_xport();
3889 new_bus->xport = &xport_default;
3894 /* Notify interested parties */
3895 if (sim->path_id != CAM_XPT_PATH_ID) {
3897 xpt_async(AC_PATH_REGISTERED, path, &cpi);
3898 if ((cpi.hba_misc & PIM_NOSCAN) == 0) {
3899 union ccb *scan_ccb;
3901 /* Initiate bus rescan. */
3902 scan_ccb = xpt_alloc_ccb_nowait();
3903 if (scan_ccb != NULL) {
3904 scan_ccb->ccb_h.path = path;
3905 scan_ccb->ccb_h.func_code = XPT_SCAN_BUS;
3906 scan_ccb->crcn.flags = 0;
3907 xpt_rescan(scan_ccb);
3910 "Can't allocate CCB to scan bus\n");
3911 xpt_free_path(path);
3914 xpt_free_path(path);
3916 xpt_free_path(path);
3917 return (CAM_SUCCESS);
3921 xpt_bus_deregister(path_id_t pathid)
3923 struct cam_path bus_path;
3926 status = xpt_compile_path(&bus_path, NULL, pathid,
3927 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
3928 if (status != CAM_REQ_CMP)
3931 xpt_async(AC_LOST_DEVICE, &bus_path, NULL);
3932 xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL);
3934 /* Release the reference count held while registered. */
3935 xpt_release_bus(bus_path.bus);
3936 xpt_release_path(&bus_path);
3938 return (CAM_REQ_CMP);
3942 xptnextfreepathid(void)
3948 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
3950 bus = TAILQ_FIRST(&xsoftc.xpt_busses);
3952 /* Find an unoccupied pathid */
3953 while (bus != NULL && bus->path_id <= pathid) {
3954 if (bus->path_id == pathid)
3956 bus = TAILQ_NEXT(bus, links);
3960 * Ensure that this pathid is not reserved for
3961 * a bus that may be registered in the future.
3963 if (resource_string_value("scbus", pathid, "at", &strval) == 0) {
3965 /* Start the search over */
3972 xptpathid(const char *sim_name, int sim_unit, int sim_bus)
3979 pathid = CAM_XPT_PATH_ID;
3980 snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit);
3981 if (strcmp(buf, "xpt0") == 0 && sim_bus == 0)
3984 while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) {
3985 if (strcmp(dname, "scbus")) {
3986 /* Avoid a bit of foot shooting. */
3989 if (dunit < 0) /* unwired?! */
3991 if (resource_int_value("scbus", dunit, "bus", &val) == 0) {
3992 if (sim_bus == val) {
3996 } else if (sim_bus == 0) {
3997 /* Unspecified matches bus 0 */
4001 printf("Ambiguous scbus configuration for %s%d "
4002 "bus %d, cannot wire down. The kernel "
4003 "config entry for scbus%d should "
4004 "specify a controller bus.\n"
4005 "Scbus will be assigned dynamically.\n",
4006 sim_name, sim_unit, sim_bus, dunit);
4011 if (pathid == CAM_XPT_PATH_ID)
4012 pathid = xptnextfreepathid();
4017 xpt_async_string(u_int32_t async_code)
4020 switch (async_code) {
4021 case AC_BUS_RESET: return ("AC_BUS_RESET");
4022 case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL");
4023 case AC_SCSI_AEN: return ("AC_SCSI_AEN");
4024 case AC_SENT_BDR: return ("AC_SENT_BDR");
4025 case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED");
4026 case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED");
4027 case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE");
4028 case AC_LOST_DEVICE: return ("AC_LOST_DEVICE");
4029 case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG");
4030 case AC_INQ_CHANGED: return ("AC_INQ_CHANGED");
4031 case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED");
4032 case AC_CONTRACT: return ("AC_CONTRACT");
4033 case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED");
4034 case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION");
4036 return ("AC_UNKNOWN");
4040 xpt_async_size(u_int32_t async_code)
4043 switch (async_code) {
4044 case AC_BUS_RESET: return (0);
4045 case AC_UNSOL_RESEL: return (0);
4046 case AC_SCSI_AEN: return (0);
4047 case AC_SENT_BDR: return (0);
4048 case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq));
4049 case AC_PATH_DEREGISTERED: return (0);
4050 case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev));
4051 case AC_LOST_DEVICE: return (0);
4052 case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings));
4053 case AC_INQ_CHANGED: return (0);
4054 case AC_GETDEV_CHANGED: return (0);
4055 case AC_CONTRACT: return (sizeof(struct ac_contract));
4056 case AC_ADVINFO_CHANGED: return (-1);
4057 case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio));
4063 xpt_async_process_dev(struct cam_ed *device, void *arg)
4065 union ccb *ccb = arg;
4066 struct cam_path *path = ccb->ccb_h.path;
4067 void *async_arg = ccb->casync.async_arg_ptr;
4068 u_int32_t async_code = ccb->casync.async_code;
4071 if (path->device != device
4072 && path->device->lun_id != CAM_LUN_WILDCARD
4073 && device->lun_id != CAM_LUN_WILDCARD)
4077 * The async callback could free the device.
4078 * If it is a broadcast async, it doesn't hold
4079 * device reference, so take our own reference.
4081 xpt_acquire_device(device);
4084 * If async for specific device is to be delivered to
4085 * the wildcard client, take the specific device lock.
4086 * XXX: We may need a way for client to specify it.
4088 if ((device->lun_id == CAM_LUN_WILDCARD &&
4089 path->device->lun_id != CAM_LUN_WILDCARD) ||
4090 (device->target->target_id == CAM_TARGET_WILDCARD &&
4091 path->target->target_id != CAM_TARGET_WILDCARD) ||
4092 (device->target->bus->path_id == CAM_BUS_WILDCARD &&
4093 path->target->bus->path_id != CAM_BUS_WILDCARD)) {
4094 mtx_unlock(&device->device_mtx);
4095 xpt_path_lock(path);
4100 (*(device->target->bus->xport->async))(async_code,
4101 device->target->bus, device->target, device, async_arg);
4102 xpt_async_bcast(&device->asyncs, async_code, path, async_arg);
4105 xpt_path_unlock(path);
4106 mtx_lock(&device->device_mtx);
4108 xpt_release_device(device);
4113 xpt_async_process_tgt(struct cam_et *target, void *arg)
4115 union ccb *ccb = arg;
4116 struct cam_path *path = ccb->ccb_h.path;
4118 if (path->target != target
4119 && path->target->target_id != CAM_TARGET_WILDCARD
4120 && target->target_id != CAM_TARGET_WILDCARD)
4123 if (ccb->casync.async_code == AC_SENT_BDR) {
4124 /* Update our notion of when the last reset occurred */
4125 microtime(&target->last_reset);
4128 return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb));
4132 xpt_async_process(struct cam_periph *periph, union ccb *ccb)
4135 struct cam_path *path;
4137 u_int32_t async_code;
4139 path = ccb->ccb_h.path;
4140 async_code = ccb->casync.async_code;
4141 async_arg = ccb->casync.async_arg_ptr;
4142 CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO,
4143 ("xpt_async(%s)\n", xpt_async_string(async_code)));
4146 if (async_code == AC_BUS_RESET) {
4147 /* Update our notion of when the last reset occurred */
4148 microtime(&bus->last_reset);
4151 xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb);
4154 * If this wasn't a fully wildcarded async, tell all
4155 * clients that want all async events.
4157 if (bus != xpt_periph->path->bus) {
4158 xpt_path_lock(xpt_periph->path);
4159 xpt_async_process_dev(xpt_periph->path->device, ccb);
4160 xpt_path_unlock(xpt_periph->path);
4163 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4164 xpt_release_devq(path, 1, TRUE);
4166 xpt_release_simq(path->bus->sim, TRUE);
4167 if (ccb->casync.async_arg_size > 0)
4168 free(async_arg, M_CAMXPT);
4169 xpt_free_path(path);
4174 xpt_async_bcast(struct async_list *async_head,
4175 u_int32_t async_code,
4176 struct cam_path *path, void *async_arg)
4178 struct async_node *cur_entry;
4181 cur_entry = SLIST_FIRST(async_head);
4182 while (cur_entry != NULL) {
4183 struct async_node *next_entry;
4185 * Grab the next list entry before we call the current
4186 * entry's callback. This is because the callback function
4187 * can delete its async callback entry.
4189 next_entry = SLIST_NEXT(cur_entry, links);
4190 if ((cur_entry->event_enable & async_code) != 0) {
4191 lock = cur_entry->event_lock;
4193 CAM_SIM_LOCK(path->device->sim);
4194 cur_entry->callback(cur_entry->callback_arg,
4198 CAM_SIM_UNLOCK(path->device->sim);
4200 cur_entry = next_entry;
4205 xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg)
4210 ccb = xpt_alloc_ccb_nowait();
4212 xpt_print(path, "Can't allocate CCB to send %s\n",
4213 xpt_async_string(async_code));
4217 if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) {
4218 xpt_print(path, "Can't allocate path to send %s\n",
4219 xpt_async_string(async_code));
4223 ccb->ccb_h.path->periph = NULL;
4224 ccb->ccb_h.func_code = XPT_ASYNC;
4225 ccb->ccb_h.cbfcnp = xpt_async_process;
4226 ccb->ccb_h.flags |= CAM_UNLOCKED;
4227 ccb->casync.async_code = async_code;
4228 ccb->casync.async_arg_size = 0;
4229 size = xpt_async_size(async_code);
4230 if (size > 0 && async_arg != NULL) {
4231 ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT);
4232 if (ccb->casync.async_arg_ptr == NULL) {
4233 xpt_print(path, "Can't allocate argument to send %s\n",
4234 xpt_async_string(async_code));
4235 xpt_free_path(ccb->ccb_h.path);
4239 memcpy(ccb->casync.async_arg_ptr, async_arg, size);
4240 ccb->casync.async_arg_size = size;
4241 } else if (size < 0) {
4242 ccb->casync.async_arg_ptr = async_arg;
4243 ccb->casync.async_arg_size = size;
4245 if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD)
4246 xpt_freeze_devq(path, 1);
4248 xpt_freeze_simq(path->bus->sim, 1);
4253 xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus,
4254 struct cam_et *target, struct cam_ed *device,
4259 * We only need to handle events for real devices.
4261 if (target->target_id == CAM_TARGET_WILDCARD
4262 || device->lun_id == CAM_LUN_WILDCARD)
4265 printf("%s called\n", __func__);
4269 xpt_freeze_devq_device(struct cam_ed *dev, u_int count)
4271 struct cam_devq *devq;
4274 devq = dev->sim->devq;
4275 mtx_assert(&devq->send_mtx, MA_OWNED);
4276 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4277 ("xpt_freeze_devq_device(%d) %u->%u\n", count,
4278 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count));
4279 freeze = (dev->ccbq.queue.qfrozen_cnt += count);
4280 /* Remove frozen device from sendq. */
4281 if (device_is_queued(dev))
4282 camq_remove(&devq->send_queue, dev->devq_entry.index);
4287 xpt_freeze_devq(struct cam_path *path, u_int count)
4289 struct cam_ed *dev = path->device;
4290 struct cam_devq *devq;
4293 devq = dev->sim->devq;
4294 mtx_lock(&devq->send_mtx);
4295 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count));
4296 freeze = xpt_freeze_devq_device(dev, count);
4297 mtx_unlock(&devq->send_mtx);
4302 xpt_freeze_simq(struct cam_sim *sim, u_int count)
4304 struct cam_devq *devq;
4308 mtx_lock(&devq->send_mtx);
4309 freeze = (devq->send_queue.qfrozen_cnt += count);
4310 mtx_unlock(&devq->send_mtx);
4315 xpt_release_devq_timeout(void *arg)
4318 struct cam_devq *devq;
4320 dev = (struct cam_ed *)arg;
4321 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n"));
4322 devq = dev->sim->devq;
4323 mtx_assert(&devq->send_mtx, MA_OWNED);
4324 if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE))
4329 xpt_release_devq(struct cam_path *path, u_int count, int run_queue)
4332 struct cam_devq *devq;
4334 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n",
4337 devq = dev->sim->devq;
4338 mtx_lock(&devq->send_mtx);
4339 if (xpt_release_devq_device(dev, count, run_queue))
4340 xpt_run_devq(dev->sim->devq);
4341 mtx_unlock(&devq->send_mtx);
4345 xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue)
4348 mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED);
4349 CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE,
4350 ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue,
4351 dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count));
4352 if (count > dev->ccbq.queue.qfrozen_cnt) {
4354 printf("xpt_release_devq(): requested %u > present %u\n",
4355 count, dev->ccbq.queue.qfrozen_cnt);
4357 count = dev->ccbq.queue.qfrozen_cnt;
4359 dev->ccbq.queue.qfrozen_cnt -= count;
4360 if (dev->ccbq.queue.qfrozen_cnt == 0) {
4362 * No longer need to wait for a successful
4363 * command completion.
4365 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
4367 * Remove any timeouts that might be scheduled
4368 * to release this queue.
4370 if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) {
4371 callout_stop(&dev->callout);
4372 dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING;
4375 * Now that we are unfrozen schedule the
4376 * device so any pending transactions are
4379 xpt_schedule_devq(dev->sim->devq, dev);
4386 xpt_release_simq(struct cam_sim *sim, int run_queue)
4388 struct cam_devq *devq;
4391 mtx_lock(&devq->send_mtx);
4392 if (devq->send_queue.qfrozen_cnt <= 0) {
4394 printf("xpt_release_simq: requested 1 > present %u\n",
4395 devq->send_queue.qfrozen_cnt);
4398 devq->send_queue.qfrozen_cnt--;
4399 if (devq->send_queue.qfrozen_cnt == 0) {
4401 * If there is a timeout scheduled to release this
4402 * sim queue, remove it. The queue frozen count is
4405 if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){
4406 callout_stop(&sim->callout);
4407 sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING;
4411 * Now that we are unfrozen run the send queue.
4413 xpt_run_devq(sim->devq);
4416 mtx_unlock(&devq->send_mtx);
4420 * XXX Appears to be unused.
4423 xpt_release_simq_timeout(void *arg)
4425 struct cam_sim *sim;
4427 sim = (struct cam_sim *)arg;
4428 xpt_release_simq(sim, /* run_queue */ TRUE);
4432 xpt_done(union ccb *done_ccb)
4434 struct cam_doneq *queue;
4437 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done\n"));
4438 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4441 hash = (done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id +
4442 done_ccb->ccb_h.target_lun) % cam_num_doneqs;
4443 queue = &cam_doneqs[hash];
4444 mtx_lock(&queue->cam_doneq_mtx);
4445 run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq));
4446 STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe);
4447 done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX;
4448 mtx_unlock(&queue->cam_doneq_mtx);
4450 wakeup(&queue->cam_doneq);
4454 xpt_done_direct(union ccb *done_ccb)
4457 CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done_direct\n"));
4458 if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0)
4461 xpt_done_process(&done_ccb->ccb_h);
4469 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4474 xpt_alloc_ccb_nowait()
4478 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4483 xpt_free_ccb(union ccb *free_ccb)
4485 free(free_ccb, M_CAMCCB);
4490 /* Private XPT functions */
4493 * Get a CAM control block for the caller. Charge the structure to the device
4494 * referenced by the path. If we don't have sufficient resources to allocate
4495 * more ccbs, we return NULL.
4498 xpt_get_ccb_nowait(struct cam_periph *periph)
4502 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT);
4503 if (new_ccb == NULL)
4505 periph->periph_allocated++;
4506 cam_ccbq_take_opening(&periph->path->device->ccbq);
4511 xpt_get_ccb(struct cam_periph *periph)
4515 cam_periph_unlock(periph);
4516 new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK);
4517 cam_periph_lock(periph);
4518 periph->periph_allocated++;
4519 cam_ccbq_take_opening(&periph->path->device->ccbq);
4524 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
4526 struct ccb_hdr *ccb_h;
4528 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n"));
4529 cam_periph_assert(periph, MA_OWNED);
4530 while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL ||
4531 ccb_h->pinfo.priority != priority) {
4532 if (priority < periph->immediate_priority) {
4533 periph->immediate_priority = priority;
4534 xpt_run_allocq(periph, 0);
4536 cam_periph_sleep(periph, &periph->ccb_list, PRIBIO,
4539 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
4540 return ((union ccb *)ccb_h);
4544 xpt_acquire_bus(struct cam_eb *bus)
4553 xpt_release_bus(struct cam_eb *bus)
4557 KASSERT(bus->refcount >= 1, ("bus->refcount >= 1"));
4558 if (--bus->refcount > 0) {
4562 TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links);
4563 xsoftc.bus_generation++;
4565 KASSERT(TAILQ_EMPTY(&bus->et_entries),
4566 ("destroying bus, but target list is not empty"));
4567 cam_sim_release(bus->sim);
4568 mtx_destroy(&bus->eb_mtx);
4569 free(bus, M_CAMXPT);
4572 static struct cam_et *
4573 xpt_alloc_target(struct cam_eb *bus, target_id_t target_id)
4575 struct cam_et *cur_target, *target;
4577 mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED);
4578 mtx_assert(&bus->eb_mtx, MA_OWNED);
4579 target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT,
4584 TAILQ_INIT(&target->ed_entries);
4586 target->target_id = target_id;
4587 target->refcount = 1;
4588 target->generation = 0;
4589 target->luns = NULL;
4590 mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF);
4591 timevalclear(&target->last_reset);
4593 * Hold a reference to our parent bus so it
4594 * will not go away before we do.
4598 /* Insertion sort into our bus's target list */
4599 cur_target = TAILQ_FIRST(&bus->et_entries);
4600 while (cur_target != NULL && cur_target->target_id < target_id)
4601 cur_target = TAILQ_NEXT(cur_target, links);
4602 if (cur_target != NULL) {
4603 TAILQ_INSERT_BEFORE(cur_target, target, links);
4605 TAILQ_INSERT_TAIL(&bus->et_entries, target, links);
4612 xpt_acquire_target(struct cam_et *target)
4614 struct cam_eb *bus = target->bus;
4616 mtx_lock(&bus->eb_mtx);
4618 mtx_unlock(&bus->eb_mtx);
4622 xpt_release_target(struct cam_et *target)
4624 struct cam_eb *bus = target->bus;
4626 mtx_lock(&bus->eb_mtx);
4627 if (--target->refcount > 0) {
4628 mtx_unlock(&bus->eb_mtx);
4631 TAILQ_REMOVE(&bus->et_entries, target, links);
4633 mtx_unlock(&bus->eb_mtx);
4634 KASSERT(TAILQ_EMPTY(&target->ed_entries),
4635 ("destroying target, but device list is not empty"));
4636 xpt_release_bus(bus);
4637 mtx_destroy(&target->luns_mtx);
4639 free(target->luns, M_CAMXPT);
4640 free(target, M_CAMXPT);
4643 static struct cam_ed *
4644 xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target,
4647 struct cam_ed *device;
4649 device = xpt_alloc_device(bus, target, lun_id);
4653 device->mintags = 1;
4654 device->maxtags = 1;
4659 xpt_destroy_device(void *context, int pending)
4661 struct cam_ed *device = context;
4663 mtx_lock(&device->device_mtx);
4664 mtx_destroy(&device->device_mtx);
4665 free(device, M_CAMDEV);
4669 xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id)
4671 struct cam_ed *cur_device, *device;
4672 struct cam_devq *devq;
4675 mtx_assert(&bus->eb_mtx, MA_OWNED);
4676 /* Make space for us in the device queue on our bus */
4677 devq = bus->sim->devq;
4678 mtx_lock(&devq->send_mtx);
4679 status = cam_devq_resize(devq, devq->send_queue.array_size + 1);
4680 mtx_unlock(&devq->send_mtx);
4681 if (status != CAM_REQ_CMP)
4684 device = (struct cam_ed *)malloc(sizeof(*device),
4685 M_CAMDEV, M_NOWAIT|M_ZERO);
4689 cam_init_pinfo(&device->devq_entry);
4690 device->target = target;
4691 device->lun_id = lun_id;
4692 device->sim = bus->sim;
4693 if (cam_ccbq_init(&device->ccbq,
4694 bus->sim->max_dev_openings) != 0) {
4695 free(device, M_CAMDEV);
4698 SLIST_INIT(&device->asyncs);
4699 SLIST_INIT(&device->periphs);
4700 device->generation = 0;
4701 device->flags = CAM_DEV_UNCONFIGURED;
4702 device->tag_delay_count = 0;
4703 device->tag_saved_openings = 0;
4704 device->refcount = 1;
4705 mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF);
4706 callout_init_mtx(&device->callout, &devq->send_mtx, 0);
4707 TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device);
4709 * Hold a reference to our parent bus so it
4710 * will not go away before we do.
4714 cur_device = TAILQ_FIRST(&target->ed_entries);
4715 while (cur_device != NULL && cur_device->lun_id < lun_id)
4716 cur_device = TAILQ_NEXT(cur_device, links);
4717 if (cur_device != NULL)
4718 TAILQ_INSERT_BEFORE(cur_device, device, links);
4720 TAILQ_INSERT_TAIL(&target->ed_entries, device, links);
4721 target->generation++;
4726 xpt_acquire_device(struct cam_ed *device)
4728 struct cam_eb *bus = device->target->bus;
4730 mtx_lock(&bus->eb_mtx);
4732 mtx_unlock(&bus->eb_mtx);
4736 xpt_release_device(struct cam_ed *device)
4738 struct cam_eb *bus = device->target->bus;
4739 struct cam_devq *devq;
4741 mtx_lock(&bus->eb_mtx);
4742 if (--device->refcount > 0) {
4743 mtx_unlock(&bus->eb_mtx);
4747 TAILQ_REMOVE(&device->target->ed_entries, device,links);
4748 device->target->generation++;
4749 mtx_unlock(&bus->eb_mtx);
4751 /* Release our slot in the devq */
4752 devq = bus->sim->devq;
4753 mtx_lock(&devq->send_mtx);
4754 cam_devq_resize(devq, devq->send_queue.array_size - 1);
4755 mtx_unlock(&devq->send_mtx);
4757 KASSERT(SLIST_EMPTY(&device->periphs),
4758 ("destroying device, but periphs list is not empty"));
4759 KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX,
4760 ("destroying device while still queued for ccbs"));
4762 if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0)
4763 callout_stop(&device->callout);
4765 xpt_release_target(device->target);
4767 cam_ccbq_fini(&device->ccbq);
4769 * Free allocated memory. free(9) does nothing if the
4770 * supplied pointer is NULL, so it is safe to call without
4773 free(device->supported_vpds, M_CAMXPT);
4774 free(device->device_id, M_CAMXPT);
4775 free(device->ext_inq, M_CAMXPT);
4776 free(device->physpath, M_CAMXPT);
4777 free(device->rcap_buf, M_CAMXPT);
4778 free(device->serial_num, M_CAMXPT);
4779 taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task);
4783 xpt_dev_ccbq_resize(struct cam_path *path, int newopenings)
4789 mtx_lock(&dev->sim->devq->send_mtx);
4790 result = cam_ccbq_resize(&dev->ccbq, newopenings);
4791 mtx_unlock(&dev->sim->devq->send_mtx);
4792 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
4793 || (dev->inq_flags & SID_CmdQue) != 0)
4794 dev->tag_saved_openings = newopenings;
4798 static struct cam_eb *
4799 xpt_find_bus(path_id_t path_id)
4804 for (bus = TAILQ_FIRST(&xsoftc.xpt_busses);
4806 bus = TAILQ_NEXT(bus, links)) {
4807 if (bus->path_id == path_id) {
4816 static struct cam_et *
4817 xpt_find_target(struct cam_eb *bus, target_id_t target_id)
4819 struct cam_et *target;
4821 mtx_assert(&bus->eb_mtx, MA_OWNED);
4822 for (target = TAILQ_FIRST(&bus->et_entries);
4824 target = TAILQ_NEXT(target, links)) {
4825 if (target->target_id == target_id) {
4833 static struct cam_ed *
4834 xpt_find_device(struct cam_et *target, lun_id_t lun_id)
4836 struct cam_ed *device;
4838 mtx_assert(&target->bus->eb_mtx, MA_OWNED);
4839 for (device = TAILQ_FIRST(&target->ed_entries);
4841 device = TAILQ_NEXT(device, links)) {
4842 if (device->lun_id == lun_id) {
4851 xpt_start_tags(struct cam_path *path)
4853 struct ccb_relsim crs;
4854 struct cam_ed *device;
4855 struct cam_sim *sim;
4858 device = path->device;
4859 sim = path->bus->sim;
4860 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4861 xpt_freeze_devq(path, /*count*/1);
4862 device->inq_flags |= SID_CmdQue;
4863 if (device->tag_saved_openings != 0)
4864 newopenings = device->tag_saved_openings;
4866 newopenings = min(device->maxtags,
4867 sim->max_tagged_dev_openings);
4868 xpt_dev_ccbq_resize(path, newopenings);
4869 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4870 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4871 crs.ccb_h.func_code = XPT_REL_SIMQ;
4872 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4874 = crs.release_timeout
4877 xpt_action((union ccb *)&crs);
4881 xpt_stop_tags(struct cam_path *path)
4883 struct ccb_relsim crs;
4884 struct cam_ed *device;
4885 struct cam_sim *sim;
4887 device = path->device;
4888 sim = path->bus->sim;
4889 device->flags &= ~CAM_DEV_TAG_AFTER_COUNT;
4890 device->tag_delay_count = 0;
4891 xpt_freeze_devq(path, /*count*/1);
4892 device->inq_flags &= ~SID_CmdQue;
4893 xpt_dev_ccbq_resize(path, sim->max_dev_openings);
4894 xpt_async(AC_GETDEV_CHANGED, path, NULL);
4895 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
4896 crs.ccb_h.func_code = XPT_REL_SIMQ;
4897 crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY;
4899 = crs.release_timeout
4902 xpt_action((union ccb *)&crs);
4906 xpt_boot_delay(void *arg)
4913 xpt_config(void *arg)
4916 * Now that interrupts are enabled, go find our devices
4918 if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq"))
4919 printf("xpt_config: failed to create taskqueue thread.\n");
4921 /* Setup debugging path */
4922 if (cam_dflags != CAM_DEBUG_NONE) {
4923 if (xpt_create_path(&cam_dpath, NULL,
4924 CAM_DEBUG_BUS, CAM_DEBUG_TARGET,
4925 CAM_DEBUG_LUN) != CAM_REQ_CMP) {
4926 printf("xpt_config: xpt_create_path() failed for debug"
4927 " target %d:%d:%d, debugging disabled\n",
4928 CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN);
4929 cam_dflags = CAM_DEBUG_NONE;
4934 periphdriver_init(1);
4936 callout_init(&xsoftc.boot_callout, 1);
4937 callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0,
4938 xpt_boot_delay, NULL, 0);
4939 /* Fire up rescan thread. */
4940 if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0,
4941 "cam", "scanner")) {
4942 printf("xpt_config: failed to create rescan thread.\n");
4950 xsoftc.buses_to_config++;
4955 xpt_release_boot(void)
4958 xsoftc.buses_to_config--;
4959 if (xsoftc.buses_to_config == 0 && xsoftc.buses_config_done == 0) {
4960 struct xpt_task *task;
4962 xsoftc.buses_config_done = 1;
4964 /* Call manually because we don't have any busses */
4965 task = malloc(sizeof(struct xpt_task), M_CAMXPT, M_NOWAIT);
4967 TASK_INIT(&task->task, 0, xpt_finishconfig_task, task);
4968 taskqueue_enqueue(taskqueue_thread, &task->task);
4975 * If the given device only has one peripheral attached to it, and if that
4976 * peripheral is the passthrough driver, announce it. This insures that the
4977 * user sees some sort of announcement for every peripheral in their system.
4980 xptpassannouncefunc(struct cam_ed *device, void *arg)
4982 struct cam_periph *periph;
4985 for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL;
4986 periph = SLIST_NEXT(periph, periph_links), i++);
4988 periph = SLIST_FIRST(&device->periphs);
4990 && (strncmp(periph->periph_name, "pass", 4) == 0))
4991 xpt_announce_periph(periph, NULL);
4997 xpt_finishconfig_task(void *context, int pending)
5000 periphdriver_init(2);
5002 * Check for devices with no "standard" peripheral driver
5003 * attached. For any devices like that, announce the
5004 * passthrough driver so the user will see something.
5007 xpt_for_all_devices(xptpassannouncefunc, NULL);
5009 /* Release our hook so that the boot can continue. */
5010 config_intrhook_disestablish(xsoftc.xpt_config_hook);
5011 free(xsoftc.xpt_config_hook, M_CAMXPT);
5012 xsoftc.xpt_config_hook = NULL;
5014 free(context, M_CAMXPT);
5018 xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg,
5019 struct cam_path *path)
5021 struct ccb_setasync csa;
5026 status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID,
5027 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
5028 if (status != CAM_REQ_CMP)
5030 xpt_path_lock(path);
5034 xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL);
5035 csa.ccb_h.func_code = XPT_SASYNC_CB;
5036 csa.event_enable = event;
5037 csa.callback = cbfunc;
5038 csa.callback_arg = cbarg;
5039 xpt_action((union ccb *)&csa);
5040 status = csa.ccb_h.status;
5043 xpt_path_unlock(path);
5044 xpt_free_path(path);
5047 if ((status == CAM_REQ_CMP) &&
5048 (csa.event_enable & AC_FOUND_DEVICE)) {
5050 * Get this peripheral up to date with all
5051 * the currently existing devices.
5053 xpt_for_all_devices(xptsetasyncfunc, &csa);
5055 if ((status == CAM_REQ_CMP) &&
5056 (csa.event_enable & AC_PATH_REGISTERED)) {
5058 * Get this peripheral up to date with all
5059 * the currently existing busses.
5061 xpt_for_all_busses(xptsetasyncbusfunc, &csa);
5068 xptaction(struct cam_sim *sim, union ccb *work_ccb)
5070 CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n"));
5072 switch (work_ccb->ccb_h.func_code) {
5073 /* Common cases first */
5074 case XPT_PATH_INQ: /* Path routing inquiry */
5076 struct ccb_pathinq *cpi;
5078 cpi = &work_ccb->cpi;
5079 cpi->version_num = 1; /* XXX??? */
5080 cpi->hba_inquiry = 0;
5081 cpi->target_sprt = 0;
5083 cpi->hba_eng_cnt = 0;
5084 cpi->max_target = 0;
5086 cpi->initiator_id = 0;
5087 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
5088 strncpy(cpi->hba_vid, "", HBA_IDLEN);
5089 strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
5090 cpi->unit_number = sim->unit_number;
5091 cpi->bus_id = sim->bus_id;
5092 cpi->base_transfer_speed = 0;
5093 cpi->protocol = PROTO_UNSPECIFIED;
5094 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
5095 cpi->transport = XPORT_UNSPECIFIED;
5096 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
5097 cpi->ccb_h.status = CAM_REQ_CMP;
5102 work_ccb->ccb_h.status = CAM_REQ_INVALID;
5109 * The xpt as a "controller" has no interrupt sources, so polling
5113 xptpoll(struct cam_sim *sim)
5118 xpt_lock_buses(void)
5120 mtx_lock(&xsoftc.xpt_topo_lock);
5124 xpt_unlock_buses(void)
5126 mtx_unlock(&xsoftc.xpt_topo_lock);
5130 xpt_path_mtx(struct cam_path *path)
5133 return (&path->device->device_mtx);
5137 xpt_done_process(struct ccb_hdr *ccb_h)
5139 struct cam_sim *sim;
5140 struct cam_devq *devq;
5141 struct mtx *mtx = NULL;
5143 if (ccb_h->flags & CAM_HIGH_POWER) {
5144 struct highpowerlist *hphead;
5145 struct cam_ed *device;
5147 mtx_lock(&xsoftc.xpt_highpower_lock);
5148 hphead = &xsoftc.highpowerq;
5150 device = STAILQ_FIRST(hphead);
5153 * Increment the count since this command is done.
5155 xsoftc.num_highpower++;
5158 * Any high powered commands queued up?
5160 if (device != NULL) {
5162 STAILQ_REMOVE_HEAD(hphead, highpowerq_entry);
5163 mtx_unlock(&xsoftc.xpt_highpower_lock);
5165 mtx_lock(&device->sim->devq->send_mtx);
5166 xpt_release_devq_device(device,
5167 /*count*/1, /*runqueue*/TRUE);
5168 mtx_unlock(&device->sim->devq->send_mtx);
5170 mtx_unlock(&xsoftc.xpt_highpower_lock);
5173 sim = ccb_h->path->bus->sim;
5175 if (ccb_h->status & CAM_RELEASE_SIMQ) {
5176 xpt_release_simq(sim, /*run_queue*/FALSE);
5177 ccb_h->status &= ~CAM_RELEASE_SIMQ;
5180 if ((ccb_h->flags & CAM_DEV_QFRZDIS)
5181 && (ccb_h->status & CAM_DEV_QFRZN)) {
5182 xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE);
5183 ccb_h->status &= ~CAM_DEV_QFRZN;
5187 if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) {
5188 struct cam_ed *dev = ccb_h->path->device;
5190 mtx_lock(&devq->send_mtx);
5191 devq->send_active--;
5192 devq->send_openings++;
5193 cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h);
5195 if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0
5196 && (dev->ccbq.dev_active == 0))) {
5197 dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY;
5198 xpt_release_devq_device(dev, /*count*/1,
5199 /*run_queue*/FALSE);
5202 if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0
5203 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) {
5204 dev->flags &= ~CAM_DEV_REL_ON_COMPLETE;
5205 xpt_release_devq_device(dev, /*count*/1,
5206 /*run_queue*/FALSE);
5209 if (!device_is_queued(dev))
5210 (void)xpt_schedule_devq(devq, dev);
5212 mtx_unlock(&devq->send_mtx);
5214 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) {
5215 mtx = xpt_path_mtx(ccb_h->path);
5218 if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0
5219 && (--dev->tag_delay_count == 0))
5220 xpt_start_tags(ccb_h->path);
5224 if ((ccb_h->flags & CAM_UNLOCKED) == 0) {
5226 mtx = xpt_path_mtx(ccb_h->path);
5236 /* Call the peripheral driver's callback */
5237 ccb_h->pinfo.index = CAM_UNQUEUED_INDEX;
5238 (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h);
5244 xpt_done_td(void *arg)
5246 struct cam_doneq *queue = arg;
5247 struct ccb_hdr *ccb_h;
5248 STAILQ_HEAD(, ccb_hdr) doneq;
5250 STAILQ_INIT(&doneq);
5251 mtx_lock(&queue->cam_doneq_mtx);
5253 while (STAILQ_EMPTY(&queue->cam_doneq)) {
5254 queue->cam_doneq_sleep = 1;
5255 msleep(&queue->cam_doneq, &queue->cam_doneq_mtx,
5257 queue->cam_doneq_sleep = 0;
5259 STAILQ_CONCAT(&doneq, &queue->cam_doneq);
5260 mtx_unlock(&queue->cam_doneq_mtx);
5262 THREAD_NO_SLEEPING();
5263 while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) {
5264 STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe);
5265 xpt_done_process(ccb_h);
5267 THREAD_SLEEPING_OK();
5269 mtx_lock(&queue->cam_doneq_mtx);
5274 camisr_runqueue(void)
5276 struct ccb_hdr *ccb_h;
5277 struct cam_doneq *queue;
5280 /* Process global queues. */
5281 for (i = 0; i < cam_num_doneqs; i++) {
5282 queue = &cam_doneqs[i];
5283 mtx_lock(&queue->cam_doneq_mtx);
5284 while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) {
5285 STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe);
5286 mtx_unlock(&queue->cam_doneq_mtx);
5287 xpt_done_process(ccb_h);
5288 mtx_lock(&queue->cam_doneq_mtx);
5290 mtx_unlock(&queue->cam_doneq_mtx);