2 * Copyright (c) 2003 Silicon Graphics International Corp.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions, and the following disclaimer,
10 * without modification.
11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12 * substantially similar to the "NO WARRANTY" disclaimer below
13 * ("Disclaimer") and any redistribution must be conditioned upon
14 * including a substantially similar Disclaimer requirement for further
15 * binary redistribution.
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
21 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
22 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
27 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGES.
30 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_io.h#5 $
34 * CAM Target Layer data movement structures/interface.
36 * Author: Ken Merry <ken@FreeBSD.org>
43 #define EXTERN(__var,__val) __var = __val
45 #define EXTERN(__var,__val) extern __var
48 #define CTL_MAX_CDBLEN 32
50 * Uncomment this next line to enable printing out times for I/Os
51 * that take longer than CTL_TIME_IO_SECS seconds to get to the datamove
56 #define CTL_TIME_IO_DEFAULT_SECS 90
57 EXTERN(int ctl_time_io_secs, CTL_TIME_IO_DEFAULT_SECS);
61 * Uncomment this next line to enable the CTL I/O delay feature. You
62 * can delay I/O at two different points -- datamove and done. This is
63 * useful for diagnosing abort conditions (for hosts that send an abort on a
64 * timeout), and for determining how long a host's timeout is.
66 //#define CTL_IO_DELAY
69 CTL_STATUS_NONE, /* No status */
70 CTL_SUCCESS, /* Transaction completed successfully */
71 CTL_CMD_TIMEOUT, /* Command timed out, shouldn't happen here */
72 CTL_SEL_TIMEOUT, /* Selection timeout, shouldn't happen here */
73 CTL_ERROR, /* General CTL error XXX expand on this? */
74 CTL_SCSI_ERROR, /* SCSI error, look at status byte/sense data */
75 CTL_CMD_ABORTED, /* Command aborted, don't return status */
76 CTL_STATUS_MASK = 0xfff,/* Mask off any status flags */
77 CTL_AUTOSENSE = 0x1000 /* Autosense performed */
81 * WARNING: Keep the data in/out/none flags where they are. They're used
82 * in conjuction with ctl_cmd_flags. See comment above ctl_cmd_flags
83 * definition in ctl_private.h.
86 CTL_FLAG_NONE = 0x00000000, /* no flags */
87 CTL_FLAG_DATA_IN = 0x00000001, /* DATA IN */
88 CTL_FLAG_DATA_OUT = 0x00000002, /* DATA OUT */
89 CTL_FLAG_DATA_NONE = 0x00000003, /* no data */
90 CTL_FLAG_DATA_MASK = 0x00000003,
91 CTL_FLAG_KDPTR_SGLIST = 0x00000008, /* kern_data_ptr is S/G list*/
92 CTL_FLAG_EDPTR_SGLIST = 0x00000010, /* ext_data_ptr is S/G list */
93 CTL_FLAG_DO_AUTOSENSE = 0x00000020, /* grab sense info */
94 CTL_FLAG_USER_REQ = 0x00000040, /* request came from userland */
95 CTL_FLAG_ALLOCATED = 0x00000100, /* data space allocated */
96 CTL_FLAG_BLOCKED = 0x00000200, /* on the blocked queue */
97 CTL_FLAG_ABORT_STATUS = 0x00000400, /* return TASK ABORTED status */
98 CTL_FLAG_ABORT = 0x00000800, /* this I/O should be aborted */
99 CTL_FLAG_DMA_INPROG = 0x00001000, /* DMA in progress */
100 CTL_FLAG_DELAY_DONE = 0x00004000, /* delay injection done */
101 CTL_FLAG_INT_COPY = 0x00008000, /* internal copy, no done call*/
102 CTL_FLAG_SENT_2OTHER_SC = 0x00010000,
103 CTL_FLAG_FROM_OTHER_SC = 0x00020000,
104 CTL_FLAG_IS_WAS_ON_RTR = 0x00040000, /* Don't rerun cmd on failover*/
105 CTL_FLAG_BUS_ADDR = 0x00080000, /* ctl_sglist contains BUS
106 addresses, not virtual ones*/
107 CTL_FLAG_IO_CONT = 0x00100000, /* Continue I/O instead of
110 CTL_FLAG_ALREADY_DONE = 0x00200000 /* I/O already completed */
112 CTL_FLAG_NO_DATAMOVE = 0x00400000,
113 CTL_FLAG_DMA_QUEUED = 0x00800000, /* DMA queued but not started*/
114 CTL_FLAG_STATUS_QUEUED = 0x01000000, /* Status queued but not sent*/
116 CTL_FLAG_FAILOVER = 0x04000000, /* Killed by a failover */
117 CTL_FLAG_IO_ACTIVE = 0x08000000, /* I/O active on this SC */
118 CTL_FLAG_STATUS_SENT = 0x10000000, /* Status sent by datamove */
119 CTL_FLAG_SERSEQ_DONE = 0x20000000 /* All storage I/O started */
128 struct ctl_lba_len_flags {
132 #define CTL_LLF_FUA 0x04000000
133 #define CTL_LLF_DPO 0x08000000
134 #define CTL_LLF_READ 0x10000000
135 #define CTL_LLF_WRITE 0x20000000
136 #define CTL_LLF_VERIFY 0x40000000
137 #define CTL_LLF_COMPARE 0x80000000
140 struct ctl_ptr_len_flags {
147 uint8_t bytes[sizeof(uint64_t) * 2];
153 * Number of CTL private areas.
155 #define CTL_NUM_PRIV 6
158 * Which private area are we using for a particular piece of data?
160 #define CTL_PRIV_LUN 0 /* CTL LUN pointer goes here */
161 #define CTL_PRIV_LBA_LEN 1 /* Decoded LBA/len for read/write*/
162 #define CTL_PRIV_MODEPAGE 1 /* Modepage info for config write */
163 #define CTL_PRIV_BACKEND 2 /* Reserved for block, RAIDCore */
164 #define CTL_PRIV_BACKEND_LUN 3 /* Backend LUN pointer */
165 #define CTL_PRIV_FRONTEND 4 /* Frontend storage */
166 #define CTL_PRIV_FRONTEND2 5 /* Another frontend storage */
168 #define CTL_INVALID_PORTNAME 0xFF
169 #define CTL_UNMAPPED_IID 0xFF
171 struct ctl_sg_entry {
183 uint32_t initid; /* Initiator ID */
184 uint32_t targ_port; /* Target port, filled in by PORT */
185 uint32_t targ_lun; /* Destination lun */
186 uint32_t targ_mapped_lun; /* Destination lun CTL-wide */
194 CTL_MSG_MANAGE_TASKS,
197 CTL_MSG_DATAMOVE_DONE,
198 CTL_MSG_UA, /* Set/clear UA on secondary. */
199 CTL_MSG_PORT_SYNC, /* Information about port. */
200 CTL_MSG_LUN_SYNC, /* Information about LUN. */
201 CTL_MSG_IID_SYNC, /* Information about initiator. */
202 CTL_MSG_FAILOVER /* Fake, never sent though the wire */
208 uint32_t version; /* interface version XXX */
209 ctl_io_type io_type; /* task I/O, SCSI I/O, etc. */
210 ctl_msg_type msg_type;
211 struct ctl_nexus nexus; /* Initiator, port, target, lun */
212 uint32_t iid_indx; /* the index into the iid mapping */
213 uint32_t flags; /* transaction flags */
214 uint32_t status; /* transaction status */
215 uint32_t port_status; /* trans status, set by PORT, 0 = good*/
216 uint32_t timeout; /* timeout in ms */
217 uint32_t retries; /* retry count */
219 struct callout delay_callout;
220 #endif /* CTL_IO_DELAY */
222 time_t start_time; /* I/O start time */
223 struct bintime start_bt; /* Timer start ticks */
224 struct bintime dma_start_bt; /* DMA start ticks */
225 struct bintime dma_bt; /* DMA total ticks */
226 uint32_t num_dmas; /* Number of DMAs */
227 #endif /* CTL_TIME_IO */
228 union ctl_io *original_sc;
229 union ctl_io *serializing_sc;
230 void *pool; /* I/O pool */
231 union ctl_priv ctl_private[CTL_NUM_PRIV];/* CTL private area */
232 struct ctl_sg_entry *remote_sglist;
233 struct ctl_sg_entry *local_sglist;
234 STAILQ_ENTRY(ctl_io_hdr) links; /* linked list pointer */
235 TAILQ_ENTRY(ctl_io_hdr) ooa_links;
236 TAILQ_ENTRY(ctl_io_hdr) blocked_links;
243 CTL_TAG_HEAD_OF_QUEUE,
250 * SCSI passthrough I/O structure for the CAM Target Layer. Note
251 * that some of these fields are here for completeness, but they aren't
252 * used in the CTL implementation. e.g., timeout and retries won't be
255 * Note: Make sure the io_hdr is *always* the first element in this
259 struct ctl_io_hdr io_hdr; /* common to all I/O types */
262 * The ext_* fields are generally intended for frontend use; CTL itself
263 * doesn't modify or use them.
265 uint32_t ext_sg_entries; /* 0 = no S/G list, > 0 = num entries */
266 uint8_t *ext_data_ptr; /* data buffer or S/G list */
267 uint32_t ext_data_len; /* Data transfer length */
268 uint32_t ext_data_filled; /* Amount of data filled so far */
271 * The number of scatter/gather entries in the list pointed to
272 * by kern_data_ptr. 0 means there is no list, just a data pointer.
274 uint32_t kern_sg_entries;
276 uint32_t rem_sg_entries; /* Unused. */
279 * The data pointer or a pointer to the scatter/gather list.
281 uint8_t *kern_data_ptr;
284 * Length of the data buffer or scatter/gather list. It's also
285 * the length of this particular piece of the data transfer,
286 * ie. number of bytes expected to be transferred by the current
287 * invocation of frontend's datamove() callback. It's always
288 * less than or equal to kern_total_len.
290 uint32_t kern_data_len;
293 * Total length of data to be transferred during this particular
294 * SCSI command, as decoded from SCSI CDB.
296 uint32_t kern_total_len;
299 * Amount of data left after the current data transfer.
301 uint32_t kern_data_resid;
304 * Byte offset of this transfer, equal to the amount of data
305 * already transferred for this SCSI command during previous
306 * datamove() invocations.
308 uint32_t kern_rel_offset;
310 struct scsi_sense_data sense_data; /* sense data */
311 uint8_t sense_len; /* Returned sense length */
312 uint8_t scsi_status; /* SCSI status byte */
313 uint8_t sense_residual; /* Unused. */
314 uint32_t residual; /* data residual length */
315 uint32_t tag_num; /* tag number */
316 ctl_tag_type tag_type; /* simple, ordered, head of queue,etc.*/
317 uint8_t cdb_len; /* CDB length */
318 uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */
319 int (*be_move_done)(union ctl_io *io); /* called by fe */
320 int (*io_cont)(union ctl_io *io); /* to continue processing */
325 CTL_TASK_ABORT_TASK_SET,
327 CTL_TASK_CLEAR_TASK_SET,
328 CTL_TASK_I_T_NEXUS_RESET,
330 CTL_TASK_TARGET_RESET,
333 CTL_TASK_PORT_LOGOUT,
335 CTL_TASK_QUERY_TASK_SET,
336 CTL_TASK_QUERY_ASYNC_EVENT
340 CTL_TASK_FUNCTION_COMPLETE,
341 CTL_TASK_FUNCTION_SUCCEEDED,
342 CTL_TASK_FUNCTION_REJECTED,
343 CTL_TASK_LUN_DOES_NOT_EXIST,
344 CTL_TASK_FUNCTION_NOT_SUPPORTED
348 * Task management I/O structure. Aborts, bus resets, etc., are sent using
351 * Note: Make sure the io_hdr is *always* the first element in this
355 struct ctl_io_hdr io_hdr; /* common to all I/O types */
356 ctl_task_type task_action; /* Target Reset, Abort, etc. */
357 uint32_t tag_num; /* tag number */
358 ctl_tag_type tag_type; /* simple, ordered, etc. */
359 uint8_t task_status; /* Complete, Succeeded, etc. */
360 uint8_t task_resp[3];/* Response information */
373 * The PR info is specifically for sending Persistent Reserve actions
374 * to the other SC which it must also act on.
376 * Note: Make sure the io_hdr is *always* the first element in this
380 ctl_pr_action action;
381 uint8_t sa_res_key[8];
386 struct ctl_ha_msg_hdr {
387 ctl_msg_type msg_type;
388 uint32_t status; /* transaction status */
389 union ctl_io *original_sc;
390 union ctl_io *serializing_sc;
391 struct ctl_nexus nexus; /* Initiator, port, target, lun */
394 #define CTL_HA_MAX_SG_ENTRIES 16
395 #define CTL_HA_DATAMOVE_SEGMENT 131072
398 * Used for CTL_MSG_PERS_ACTION.
400 struct ctl_ha_msg_pr {
401 struct ctl_ha_msg_hdr hdr;
402 struct ctl_pr_info pr_info;
406 * Used for CTL_MSG_UA.
408 struct ctl_ha_msg_ua {
409 struct ctl_ha_msg_hdr hdr;
417 * The S/G handling here is a little different than the standard ctl_scsiio
418 * structure, because we can't pass data by reference in between controllers.
419 * The S/G list in the ctl_scsiio struct is normally passed in the
420 * kern_data_ptr field. So kern_sg_entries here will always be non-zero,
421 * even if there is only one entry.
423 * Used for CTL_MSG_DATAMOVE.
425 struct ctl_ha_msg_dt {
426 struct ctl_ha_msg_hdr hdr;
427 ctl_io_flags flags; /* Only I/O flags are used here */
428 uint32_t sg_sequence; /* S/G portion number */
429 uint8_t sg_last; /* last S/G batch = 1 */
430 uint32_t sent_sg_entries; /* previous S/G count */
431 uint32_t cur_sg_entries; /* current S/G entries */
432 uint32_t kern_sg_entries; /* total S/G entries */
433 uint32_t kern_data_len; /* Length of this S/G list */
434 uint32_t kern_total_len; /* Total length of this
436 uint32_t kern_data_resid; /* Length left to transfer
438 uint32_t kern_rel_offset; /* Byte Offset of this
440 struct ctl_sg_entry sg_list[CTL_HA_MAX_SG_ENTRIES];
444 * Used for CTL_MSG_SERIALIZE, CTL_MSG_FINISH_IO, CTL_MSG_BAD_JUJU.
446 struct ctl_ha_msg_scsi {
447 struct ctl_ha_msg_hdr hdr;
448 uint32_t tag_num; /* tag number */
449 ctl_tag_type tag_type; /* simple, ordered, etc. */
450 uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */
451 uint8_t cdb_len; /* CDB length */
452 uint8_t scsi_status; /* SCSI status byte */
453 uint8_t sense_len; /* Returned sense length */
454 uint8_t sense_residual; /* sense residual length */
455 uint32_t residual; /* data residual length */
456 uint32_t fetd_status; /* trans status, set by FETD,
458 struct scsi_sense_data sense_data; /* sense data */
462 * Used for CTL_MSG_MANAGE_TASKS.
464 struct ctl_ha_msg_task {
465 struct ctl_ha_msg_hdr hdr;
466 ctl_task_type task_action; /* Target Reset, Abort, etc. */
467 uint32_t tag_num; /* tag number */
468 ctl_tag_type tag_type; /* simple, ordered, etc. */
472 * Used for CTL_MSG_PORT_SYNC.
474 struct ctl_ha_msg_port {
475 struct ctl_ha_msg_hdr hdr;
483 int target_devid_len;
489 * Used for CTL_MSG_LUN_SYNC.
491 struct ctl_ha_msg_lun {
492 struct ctl_ha_msg_hdr hdr;
494 unsigned int pr_generation;
502 struct ctl_ha_msg_lun_pr_key {
508 * Used for CTL_MSG_IID_SYNC.
510 struct ctl_ha_msg_iid {
511 struct ctl_ha_msg_hdr hdr;
519 struct ctl_ha_msg_hdr hdr;
520 struct ctl_ha_msg_task task;
521 struct ctl_ha_msg_scsi scsi;
522 struct ctl_ha_msg_dt dt;
523 struct ctl_ha_msg_pr pr;
524 struct ctl_ha_msg_ua ua;
525 struct ctl_ha_msg_port port;
526 struct ctl_ha_msg_lun lun;
527 struct ctl_ha_msg_iid iid;
532 struct ctl_io_hdr io_hdr;
533 struct ctl_ha_msg_pr pr_msg;
539 struct ctl_io_hdr io_hdr; /* common to all I/O types */
540 struct ctl_scsiio scsiio; /* Normal SCSI commands */
541 struct ctl_taskio taskio; /* SCSI task management/reset */
542 struct ctl_prio presio; /* update per. res info on other SC */
547 union ctl_io *ctl_alloc_io(void *pool_ref);
548 union ctl_io *ctl_alloc_io_nowait(void *pool_ref);
549 void ctl_free_io(union ctl_io *io);
550 void ctl_zero_io(union ctl_io *io);
551 void ctl_copy_io(union ctl_io *src, union ctl_io *dest);
555 #endif /* _CTL_IO_H_ */