sys/cam/mmc/mmc_da.c

   1 /*-
   2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
   3  *
   4  * Copyright (c) 2006 Bernd Walter <tisco@FreeBSD.org>
   5  * Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org>
   6  * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
   7  * Copyright (c) 2015-2017 Ilya Bakulin <kibab@FreeBSD.org>
   8  * All rights reserved.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer,
  15  *    without modification, immediately at the beginning of the file.
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in the
  18  *    documentation and/or other materials provided with the distribution.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  21  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  22  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  23  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  24  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  25  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  26  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  27  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  28  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  29  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  * Some code derived from the sys/dev/mmc and sys/cam/ata
  32  * Thanks to Warner Losh <imp@FreeBSD.org>, Alexander Motin <mav@FreeBSD.org>
  33  * Bernd Walter <tisco@FreeBSD.org>, and other authors.
  34  */
  35
  36 #include <sys/cdefs.h>
  37 __FBSDID("$FreeBSD$");
  38
  39 //#include "opt_sdda.h"
  40
  41 #include <sys/param.h>
  42
  43 #ifdef _KERNEL
  44 #include <sys/systm.h>
  45 #include <sys/kernel.h>
  46 #include <sys/bio.h>
  47 #include <sys/endian.h>
  48 #include <sys/taskqueue.h>
  49 #include <sys/lock.h>
  50 #include <sys/mutex.h>
  51 #include <sys/conf.h>
  52 #include <sys/devicestat.h>
  53 #include <sys/eventhandler.h>
  54 #include <sys/malloc.h>
  55 #include <sys/cons.h>
  56 #include <sys/proc.h>
  57 #include <sys/reboot.h>
  58 #include <geom/geom_disk.h>
  59 #include <machine/_inttypes.h>  /* for PRIu64 */
  60 #endif /* _KERNEL */
  61
  62 #ifndef _KERNEL
  63 #include <stdio.h>
  64 #include <string.h>
  65 #endif /* _KERNEL */
  66
  67 #include <cam/cam.h>
  68 #include <cam/cam_ccb.h>
  69 #include <cam/cam_queue.h>
  70 #include <cam/cam_periph.h>
  71 #include <cam/cam_sim.h>
  72 #include <cam/cam_xpt.h>
  73 #include <cam/cam_xpt_sim.h>
  74 #include <cam/cam_xpt_periph.h>
  75 #include <cam/cam_xpt_internal.h>
  76 #include <cam/cam_debug.h>
  77
  78
  79 #include <cam/mmc/mmc_all.h>
  80
  81 #include <machine/md_var.h>     /* geometry translation */
  82
  83 #ifdef _KERNEL
  84
  85 typedef enum {
  86         SDDA_FLAG_OPEN          = 0x0002,
  87         SDDA_FLAG_DIRTY         = 0x0004
  88 } sdda_flags;
  89
  90 typedef enum {
  91         SDDA_STATE_INIT,
  92         SDDA_STATE_INVALID,
  93         SDDA_STATE_NORMAL,
  94         SDDA_STATE_PART_SWITCH,
  95 } sdda_state;
  96
  97 #define SDDA_FMT_BOOT           "sdda%dboot"
  98 #define SDDA_FMT_GP             "sdda%dgp"
  99 #define SDDA_FMT_RPMB           "sdda%drpmb"
 100 #define SDDA_LABEL_ENH          "enh"
 101
 102 #define SDDA_PART_NAMELEN       (16 + 1)
 103
 104 struct sdda_softc;
 105
 106 struct sdda_part {
 107         struct disk *disk;
 108         struct bio_queue_head bio_queue;
 109         sdda_flags flags;
 110         struct sdda_softc *sc;
 111         u_int cnt;
 112         u_int type;
 113         bool ro;
 114         char name[SDDA_PART_NAMELEN];
 115 };
 116
 117 struct sdda_softc {
 118         int      outstanding_cmds;      /* Number of active commands */
 119         int      refcount;              /* Active xpt_action() calls */
 120         sdda_state state;
 121         struct mmc_data *mmcdata;
 122         struct cam_periph *periph;
 123 //      sdda_quirks quirks;
 124         struct task start_init_task;
 125         uint32_t raw_csd[4];
 126         uint8_t raw_ext_csd[512]; /* MMC only? */
 127         struct mmc_csd csd;
 128         struct mmc_cid cid;
 129         struct mmc_scr scr;
 130         /* Calculated from CSD */
 131         uint64_t sector_count;
 132         uint64_t mediasize;
 133
 134         /* Calculated from CID */
 135         char card_id_string[64];/* Formatted CID info (serial, MFG, etc) */
 136         char card_sn_string[16];/* Formatted serial # for disk->d_ident */
 137         /* Determined from CSD + is highspeed card*/
 138         uint32_t card_f_max;
 139
 140         /* Generic switch timeout */
 141         uint32_t cmd6_time;
 142         /* MMC partitions support */
 143         struct sdda_part *part[MMC_PART_MAX];
 144         uint8_t part_curr;      /* Partition currently switched to */
 145         uint8_t part_requested; /* What partition we're currently switching to */
 146         uint32_t part_time;     /* Partition switch timeout [us] */
 147         off_t enh_base;         /* Enhanced user data area slice base ... */
 148         off_t enh_size;         /* ... and size [bytes] */
 149         int log_count;
 150         struct timeval log_time;
 151 };
 152
 153 static const char *mmc_errmsg[] =
 154 {
 155         "None",
 156         "Timeout",
 157         "Bad CRC",
 158         "Fifo",
 159         "Failed",
 160         "Invalid",
 161         "NO MEMORY"
 162 };
 163
 164 #define ccb_bp          ppriv_ptr1
 165
 166 static  disk_strategy_t sddastrategy;
 167 static  periph_init_t   sddainit;
 168 static  void            sddaasync(void *callback_arg, u_int32_t code,
 169                                 struct cam_path *path, void *arg);
 170 static  periph_ctor_t   sddaregister;
 171 static  periph_dtor_t   sddacleanup;
 172 static  periph_start_t  sddastart;
 173 static  periph_oninv_t  sddaoninvalidate;
 174 static  void            sddadone(struct cam_periph *periph,
 175                                union ccb *done_ccb);
 176 static  int             sddaerror(union ccb *ccb, u_int32_t cam_flags,
 177                                 u_int32_t sense_flags);
 178
 179 static int mmc_handle_reply(union ccb *ccb);
 180 static uint16_t get_rca(struct cam_periph *periph);
 181 static void sdda_start_init(void *context, union ccb *start_ccb);
 182 static void sdda_start_init_task(void *context, int pending);
 183 static void sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *start_ccb);
 184 static uint32_t sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb);
 185 static void sdda_init_switch_part(struct cam_periph *periph, union ccb *start_ccb, u_int part);
 186 static int mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca);
 187 static inline uint32_t mmc_get_sector_size(struct cam_periph *periph) {return MMC_SECTOR_SIZE;}
 188
 189 /* TODO: actually issue GET_TRAN_SETTINGS to get R/O status */
 190 static inline bool sdda_get_read_only(struct cam_periph *periph, union ccb *start_ccb)
 191 {
 192
 193         return (false);
 194 }
 195
 196 static uint32_t mmc_get_spec_vers(struct cam_periph *periph);
 197 static uint64_t mmc_get_media_size(struct cam_periph *periph);
 198 static uint32_t mmc_get_cmd6_timeout(struct cam_periph *periph);
 199 static void sdda_add_part(struct cam_periph *periph, u_int type,
 200     const char *name, u_int cnt, off_t media_size, bool ro);
 201
 202 static struct periph_driver sddadriver =
 203 {
 204         sddainit, "sdda",
 205         TAILQ_HEAD_INITIALIZER(sddadriver.units), /* generation */ 0
 206 };
 207
 208 PERIPHDRIVER_DECLARE(sdda, sddadriver);
 209
 210 static MALLOC_DEFINE(M_SDDA, "sd_da", "sd_da buffers");
 211
 212 static const int exp[8] = {
 213         1, 10, 100, 1000, 10000, 100000, 1000000, 10000000
 214 };
 215
 216 static const int mant[16] = {
 217         0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80
 218 };
 219
 220 static const int cur_min[8] = {
 221         500, 1000, 5000, 10000, 25000, 35000, 60000, 100000
 222 };
 223
 224 static const int cur_max[8] = {
 225         1000, 5000, 10000, 25000, 35000, 45000, 800000, 200000
 226 };
 227
 228 static uint16_t
 229 get_rca(struct cam_periph *periph) {
 230         return periph->path->device->mmc_ident_data.card_rca;
 231 }
 232
 233 /*
 234  * Figure out if CCB execution resulted in error.
 235  * Look at both CAM-level errors and on MMC protocol errors.
 236 */
 237 static int
 238 mmc_handle_reply(union ccb *ccb)
 239 {
 240
 241         KASSERT(ccb->ccb_h.func_code == XPT_MMC_IO,
 242             ("ccb %p: cannot handle non-XPT_MMC_IO errors, got func_code=%d",
 243                 ccb, ccb->ccb_h.func_code));
 244
 245         /* TODO: maybe put MMC-specific handling into cam.c/cam_error_print altogether */
 246         if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)) {
 247                 if (ccb->mmcio.cmd.error != 0) {
 248                         xpt_print_path(ccb->ccb_h.path);
 249                         printf("CMD%d failed, err %d (%s)\n",
 250                                ccb->mmcio.cmd.opcode,
 251                                ccb->mmcio.cmd.error,
 252                                mmc_errmsg[ccb->mmcio.cmd.error]);
 253                         return (EIO);
 254                 }
 255         } else {
 256                 cam_error_print(ccb, CAM_ESF_ALL, CAM_EPF_ALL);
 257                 return (EIO);
 258         }
 259
 260         return (0); /* Normal return */
 261 }
 262
 263
 264 static uint32_t
 265 mmc_get_bits(uint32_t *bits, int bit_len, int start, int size)
 266 {
 267         const int i = (bit_len / 32) - (start / 32) - 1;
 268         const int shift = start & 31;
 269         uint32_t retval = bits[i] >> shift;
 270         if (size + shift > 32)
 271                 retval |= bits[i - 1] << (32 - shift);
 272         return (retval & ((1llu << size) - 1));
 273 }
 274
 275
 276 static void
 277 mmc_decode_csd_sd(uint32_t *raw_csd, struct mmc_csd *csd)
 278 {
 279         int v;
 280         int m;
 281         int e;
 282
 283         memset(csd, 0, sizeof(*csd));
 284         csd->csd_structure = v = mmc_get_bits(raw_csd, 128, 126, 2);
 285         if (v == 0) {
 286                 m = mmc_get_bits(raw_csd, 128, 115, 4);
 287                 e = mmc_get_bits(raw_csd, 128, 112, 3);
 288                 csd->tacc = (exp[e] * mant[m] + 9) / 10;
 289                 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
 290                 m = mmc_get_bits(raw_csd, 128, 99, 4);
 291                 e = mmc_get_bits(raw_csd, 128, 96, 3);
 292                 csd->tran_speed = exp[e] * 10000 * mant[m];
 293                 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
 294                 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
 295                 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
 296                 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
 297                 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
 298                 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
 299                 csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)];
 300                 csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)];
 301                 csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)];
 302                 csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)];
 303                 m = mmc_get_bits(raw_csd, 128, 62, 12);
 304                 e = mmc_get_bits(raw_csd, 128, 47, 3);
 305                 csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len;
 306                 csd->erase_blk_en = mmc_get_bits(raw_csd, 128, 46, 1);
 307                 csd->erase_sector = mmc_get_bits(raw_csd, 128, 39, 7) + 1;
 308                 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 7);
 309                 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
 310                 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
 311                 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
 312                 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
 313         } else if (v == 1) {
 314                 m = mmc_get_bits(raw_csd, 128, 115, 4);
 315                 e = mmc_get_bits(raw_csd, 128, 112, 3);
 316                 csd->tacc = (exp[e] * mant[m] + 9) / 10;
 317                 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
 318                 m = mmc_get_bits(raw_csd, 128, 99, 4);
 319                 e = mmc_get_bits(raw_csd, 128, 96, 3);
 320                 csd->tran_speed = exp[e] * 10000 * mant[m];
 321                 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
 322                 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
 323                 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
 324                 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
 325                 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
 326                 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
 327                 csd->capacity = ((uint64_t)mmc_get_bits(raw_csd, 128, 48, 22) + 1) *
 328                     512 * 1024;
 329                 csd->erase_blk_en = mmc_get_bits(raw_csd, 128, 46, 1);
 330                 csd->erase_sector = mmc_get_bits(raw_csd, 128, 39, 7) + 1;
 331                 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 7);
 332                 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
 333                 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
 334                 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
 335                 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
 336         } else
 337                 panic("unknown SD CSD version");
 338 }
 339
 340 static void
 341 mmc_decode_csd_mmc(uint32_t *raw_csd, struct mmc_csd *csd)
 342 {
 343         int m;
 344         int e;
 345
 346         memset(csd, 0, sizeof(*csd));
 347         csd->csd_structure = mmc_get_bits(raw_csd, 128, 126, 2);
 348         csd->spec_vers = mmc_get_bits(raw_csd, 128, 122, 4);
 349         m = mmc_get_bits(raw_csd, 128, 115, 4);
 350         e = mmc_get_bits(raw_csd, 128, 112, 3);
 351         csd->tacc = exp[e] * mant[m] + 9 / 10;
 352         csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
 353         m = mmc_get_bits(raw_csd, 128, 99, 4);
 354         e = mmc_get_bits(raw_csd, 128, 96, 3);
 355         csd->tran_speed = exp[e] * 10000 * mant[m];
 356         csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
 357         csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
 358         csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
 359         csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
 360         csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
 361         csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
 362         csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)];
 363         csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)];
 364         csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)];
 365         csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)];
 366         m = mmc_get_bits(raw_csd, 128, 62, 12);
 367         e = mmc_get_bits(raw_csd, 128, 47, 3);
 368         csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len;
 369         csd->erase_blk_en = 0;
 370         csd->erase_sector = (mmc_get_bits(raw_csd, 128, 42, 5) + 1) *
 371             (mmc_get_bits(raw_csd, 128, 37, 5) + 1);
 372         csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 5);
 373         csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
 374         csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
 375         csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
 376         csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
 377 }
 378
 379 static void
 380 mmc_decode_cid_sd(uint32_t *raw_cid, struct mmc_cid *cid)
 381 {
 382         int i;
 383
 384         /* There's no version info, so we take it on faith */
 385         memset(cid, 0, sizeof(*cid));
 386         cid->mid = mmc_get_bits(raw_cid, 128, 120, 8);
 387         cid->oid = mmc_get_bits(raw_cid, 128, 104, 16);
 388         for (i = 0; i < 5; i++)
 389                 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8);
 390         cid->pnm[5] = 0;
 391         cid->prv = mmc_get_bits(raw_cid, 128, 56, 8);
 392         cid->psn = mmc_get_bits(raw_cid, 128, 24, 32);
 393         cid->mdt_year = mmc_get_bits(raw_cid, 128, 12, 8) + 2000;
 394         cid->mdt_month = mmc_get_bits(raw_cid, 128, 8, 4);
 395 }
 396
 397 static void
 398 mmc_decode_cid_mmc(uint32_t *raw_cid, struct mmc_cid *cid)
 399 {
 400         int i;
 401
 402         /* There's no version info, so we take it on faith */
 403         memset(cid, 0, sizeof(*cid));
 404         cid->mid = mmc_get_bits(raw_cid, 128, 120, 8);
 405         cid->oid = mmc_get_bits(raw_cid, 128, 104, 8);
 406         for (i = 0; i < 6; i++)
 407                 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8);
 408         cid->pnm[6] = 0;
 409         cid->prv = mmc_get_bits(raw_cid, 128, 48, 8);
 410         cid->psn = mmc_get_bits(raw_cid, 128, 16, 32);
 411         cid->mdt_month = mmc_get_bits(raw_cid, 128, 12, 4);
 412         cid->mdt_year = mmc_get_bits(raw_cid, 128, 8, 4) + 1997;
 413 }
 414
 415 static void
 416 mmc_format_card_id_string(struct sdda_softc *sc, struct mmc_params *mmcp)
 417 {
 418         char oidstr[8];
 419         uint8_t c1;
 420         uint8_t c2;
 421
 422         /*
 423          * Format a card ID string for use by the mmcsd driver, it's what
 424          * appears between the <> in the following:
 425          * mmcsd0: 968MB <SD SD01G 8.0 SN 2686905 Mfg 08/2008 by 3 TN> at mmc0
 426          * 22.5MHz/4bit/128-block
 427          *
 428          * Also format just the card serial number, which the mmcsd driver will
 429          * use as the disk->d_ident string.
 430          *
 431          * The card_id_string in mmc_ivars is currently allocated as 64 bytes,
 432          * and our max formatted length is currently 55 bytes if every field
 433          * contains the largest value.
 434          *
 435          * Sometimes the oid is two printable ascii chars; when it's not,
 436          * format it as 0xnnnn instead.
 437          */
 438         c1 = (sc->cid.oid >> 8) & 0x0ff;
 439         c2 = sc->cid.oid & 0x0ff;
 440         if (c1 > 0x1f && c1 < 0x7f && c2 > 0x1f && c2 < 0x7f)
 441                 snprintf(oidstr, sizeof(oidstr), "%c%c", c1, c2);
 442         else
 443                 snprintf(oidstr, sizeof(oidstr), "0x%04x", sc->cid.oid);
 444         snprintf(sc->card_sn_string, sizeof(sc->card_sn_string),
 445             "%08X", sc->cid.psn);
 446         snprintf(sc->card_id_string, sizeof(sc->card_id_string),
 447                  "%s%s %s %d.%d SN %08X MFG %02d/%04d by %d %s",
 448                  mmcp->card_features & CARD_FEATURE_MMC ? "MMC" : "SD",
 449                  mmcp->card_features & CARD_FEATURE_SDHC ? "HC" : "",
 450                  sc->cid.pnm, sc->cid.prv >> 4, sc->cid.prv & 0x0f,
 451                  sc->cid.psn, sc->cid.mdt_month, sc->cid.mdt_year,
 452                  sc->cid.mid, oidstr);
 453 }
 454
 455 static int
 456 sddaopen(struct disk *dp)
 457 {
 458         struct sdda_part *part;
 459         struct cam_periph *periph;
 460         struct sdda_softc *softc;
 461         int error;
 462
 463         part = (struct sdda_part *)dp->d_drv1;
 464         softc = part->sc;
 465         periph = softc->periph;
 466         if (cam_periph_acquire(periph) != 0) {
 467                 return(ENXIO);
 468         }
 469
 470         cam_periph_lock(periph);
 471         if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) {
 472                 cam_periph_unlock(periph);
 473                 cam_periph_release(periph);
 474                 return (error);
 475         }
 476
 477         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaopen\n"));
 478
 479         part->flags |= SDDA_FLAG_OPEN;
 480
 481         cam_periph_unhold(periph);
 482         cam_periph_unlock(periph);
 483         return (0);
 484 }
 485
 486 static int
 487 sddaclose(struct disk *dp)
 488 {
 489         struct sdda_part *part;
 490         struct  cam_periph *periph;
 491         struct  sdda_softc *softc;
 492
 493         part = (struct sdda_part *)dp->d_drv1;
 494         softc = part->sc;
 495         periph = softc->periph;
 496         part->flags &= ~SDDA_FLAG_OPEN;
 497
 498         cam_periph_lock(periph);
 499
 500         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaclose\n"));
 501
 502         while (softc->refcount != 0)
 503                 cam_periph_sleep(periph, &softc->refcount, PRIBIO, "sddaclose", 1);
 504         cam_periph_unlock(periph);
 505         cam_periph_release(periph);
 506         return (0);
 507 }
 508
 509 static void
 510 sddaschedule(struct cam_periph *periph)
 511 {
 512         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 513         struct sdda_part *part;
 514         struct bio *bp;
 515         int i;
 516
 517         /* Check if we have more work to do. */
 518         /* Find partition that has outstanding commands. Prefer current partition. */
 519         bp = bioq_first(&softc->part[softc->part_curr]->bio_queue);
 520         if (bp == NULL) {
 521                 for (i = 0; i < MMC_PART_MAX; i++) {
 522                         if ((part = softc->part[i]) != NULL &&
 523                             (bp = bioq_first(&softc->part[i]->bio_queue)) != NULL)
 524                                 break;
 525                 }
 526         }
 527         if (bp != NULL) {
 528                 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
 529         }
 530 }
 531
 532 /*
 533  * Actually translate the requested transfer into one the physical driver
 534  * can understand.  The transfer is described by a buf and will include
 535  * only one physical transfer.
 536  */
 537 static void
 538 sddastrategy(struct bio *bp)
 539 {
 540         struct cam_periph *periph;
 541         struct sdda_part *part;
 542         struct sdda_softc *softc;
 543
 544         part = (struct sdda_part *)bp->bio_disk->d_drv1;
 545         softc = part->sc;
 546         periph = softc->periph;
 547
 548         cam_periph_lock(periph);
 549
 550         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastrategy(%p)\n", bp));
 551
 552         /*
 553          * If the device has been made invalid, error out
 554          */
 555         if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
 556                 cam_periph_unlock(periph);
 557                 biofinish(bp, NULL, ENXIO);
 558                 return;
 559         }
 560
 561         /*
 562          * Place it in the queue of disk activities for this disk
 563          */
 564         bioq_disksort(&part->bio_queue, bp);
 565
 566         /*
 567          * Schedule ourselves for performing the work.
 568          */
 569         sddaschedule(periph);
 570         cam_periph_unlock(periph);
 571
 572         return;
 573 }
 574
 575 static void
 576 sddainit(void)
 577 {
 578         cam_status status;
 579
 580         /*
 581          * Install a global async callback.  This callback will
 582          * receive async callbacks like "new device found".
 583          */
 584         status = xpt_register_async(AC_FOUND_DEVICE, sddaasync, NULL, NULL);
 585
 586         if (status != CAM_REQ_CMP) {
 587                 printf("sdda: Failed to attach master async callback "
 588                        "due to status 0x%x!\n", status);
 589         }
 590 }
 591
 592 /*
 593  * Callback from GEOM, called when it has finished cleaning up its
 594  * resources.
 595  */
 596 static void
 597 sddadiskgonecb(struct disk *dp)
 598 {
 599         struct cam_periph *periph;
 600         struct sdda_part *part;
 601
 602         part = (struct sdda_part *)dp->d_drv1;
 603         periph = part->sc->periph;
 604         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddadiskgonecb\n"));
 605
 606         cam_periph_release(periph);
 607 }
 608
 609 static void
 610 sddaoninvalidate(struct cam_periph *periph)
 611 {
 612         struct sdda_softc *softc;
 613         struct sdda_part *part;
 614
 615         softc = (struct sdda_softc *)periph->softc;
 616
 617         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaoninvalidate\n"));
 618
 619         /*
 620          * De-register any async callbacks.
 621          */
 622         xpt_register_async(0, sddaasync, periph, periph->path);
 623
 624         /*
 625          * Return all queued I/O with ENXIO.
 626          * XXX Handle any transactions queued to the card
 627          *     with XPT_ABORT_CCB.
 628          */
 629         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush start\n"));
 630         for (int i = 0; i < MMC_PART_MAX; i++) {
 631                 if ((part = softc->part[i]) != NULL) {
 632                         bioq_flush(&part->bio_queue, NULL, ENXIO);
 633                         disk_gone(part->disk);
 634                 }
 635         }
 636         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush end\n"));
 637
 638 }
 639
 640 static void
 641 sddacleanup(struct cam_periph *periph)
 642 {
 643         struct sdda_softc *softc;
 644         struct sdda_part *part;
 645         int i;
 646
 647         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddacleanup\n"));
 648         softc = (struct sdda_softc *)periph->softc;
 649
 650         cam_periph_unlock(periph);
 651
 652         for (i = 0; i < MMC_PART_MAX; i++) {
 653                 if ((part = softc->part[i]) != NULL) {
 654                         disk_destroy(part->disk);
 655                         free(part, M_DEVBUF);
 656                         softc->part[i] = NULL;
 657                 }
 658         }
 659         free(softc, M_DEVBUF);
 660         cam_periph_lock(periph);
 661 }
 662
 663 static void
 664 sddaasync(void *callback_arg, u_int32_t code,
 665         struct cam_path *path, void *arg)
 666 {
 667         struct ccb_getdev cgd;
 668         struct cam_periph *periph;
 669         struct sdda_softc *softc;
 670
 671         periph = (struct cam_periph *)callback_arg;
 672         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddaasync(code=%d)\n", code));
 673         switch (code) {
 674         case AC_FOUND_DEVICE:
 675         {
 676                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_FOUND_DEVICE\n"));
 677                 struct ccb_getdev *cgd;
 678                 cam_status status;
 679
 680                 cgd = (struct ccb_getdev *)arg;
 681                 if (cgd == NULL)
 682                         break;
 683
 684                 if (cgd->protocol != PROTO_MMCSD)
 685                         break;
 686
 687                 if (!(path->device->mmc_ident_data.card_features & CARD_FEATURE_MEMORY)) {
 688                         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("No memory on the card!\n"));
 689                         break;
 690                 }
 691
 692                 /*
 693                  * Allocate a peripheral instance for
 694                  * this device and start the probe
 695                  * process.
 696                  */
 697                 status = cam_periph_alloc(sddaregister, sddaoninvalidate,
 698                                           sddacleanup, sddastart,
 699                                           "sdda", CAM_PERIPH_BIO,
 700                                           path, sddaasync,
 701                                           AC_FOUND_DEVICE, cgd);
 702
 703                 if (status != CAM_REQ_CMP
 704                  && status != CAM_REQ_INPROG)
 705                         printf("sddaasync: Unable to attach to new device "
 706                                 "due to status 0x%x\n", status);
 707                 break;
 708         }
 709         case AC_GETDEV_CHANGED:
 710         {
 711                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_GETDEV_CHANGED\n"));
 712                 softc = (struct sdda_softc *)periph->softc;
 713                 xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
 714                 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
 715                 xpt_action((union ccb *)&cgd);
 716                 cam_periph_async(periph, code, path, arg);
 717                 break;
 718         }
 719         case AC_ADVINFO_CHANGED:
 720         {
 721                 uintptr_t buftype;
 722                 int i;
 723
 724                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_ADVINFO_CHANGED\n"));
 725                 buftype = (uintptr_t)arg;
 726                 if (buftype == CDAI_TYPE_PHYS_PATH) {
 727                         struct sdda_softc *softc;
 728                         struct sdda_part *part;
 729
 730                         softc = periph->softc;
 731                         for (i = 0; i < MMC_PART_MAX; i++) {
 732                                 if ((part = softc->part[i]) != NULL) {
 733                                         disk_attr_changed(part->disk, "GEOM::physpath",
 734                                             M_NOWAIT);
 735                                 }
 736                         }
 737                 }
 738                 break;
 739         }
 740         default:
 741                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> default?!\n"));
 742                 cam_periph_async(periph, code, path, arg);
 743                 break;
 744         }
 745 }
 746
 747
 748 static int
 749 sddagetattr(struct bio *bp)
 750 {
 751         struct cam_periph *periph;
 752         struct sdda_softc *softc;
 753         struct sdda_part *part;
 754         int ret;
 755
 756         part = (struct sdda_part *)bp->bio_disk->d_drv1;
 757         softc = part->sc;
 758         periph = softc->periph;
 759         cam_periph_lock(periph);
 760         ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute,
 761             periph->path);
 762         cam_periph_unlock(periph);
 763         if (ret == 0)
 764                 bp->bio_completed = bp->bio_length;
 765         return (ret);
 766 }
 767
 768 static cam_status
 769 sddaregister(struct cam_periph *periph, void *arg)
 770 {
 771         struct sdda_softc *softc;
 772         struct ccb_getdev *cgd;
 773         union ccb *request_ccb; /* CCB representing the probe request */
 774
 775         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaregister\n"));
 776         cgd = (struct ccb_getdev *)arg;
 777         if (cgd == NULL) {
 778                 printf("sddaregister: no getdev CCB, can't register device\n");
 779                 return (CAM_REQ_CMP_ERR);
 780         }
 781
 782         softc = (struct sdda_softc *)malloc(sizeof(*softc), M_DEVBUF,
 783             M_NOWAIT|M_ZERO);
 784
 785         if (softc == NULL) {
 786                 printf("sddaregister: Unable to probe new device. "
 787                     "Unable to allocate softc\n");
 788                 return (CAM_REQ_CMP_ERR);
 789         }
 790
 791         softc->state = SDDA_STATE_INIT;
 792         softc->mmcdata =
 793                 (struct mmc_data *)malloc(sizeof(struct mmc_data), M_DEVBUF, M_NOWAIT|M_ZERO);
 794         if (softc->mmcdata == NULL) {
 795                 printf("sddaregister: Unable to probe new device. "
 796                     "Unable to allocate mmcdata\n");
 797                 return (CAM_REQ_CMP_ERR);
 798         }
 799         periph->softc = softc;
 800         softc->periph = periph;
 801
 802         request_ccb = (union ccb*) arg;
 803         xpt_schedule(periph, CAM_PRIORITY_XPT);
 804         TASK_INIT(&softc->start_init_task, 0, sdda_start_init_task, periph);
 805         taskqueue_enqueue(taskqueue_thread, &softc->start_init_task);
 806
 807         return (CAM_REQ_CMP);
 808 }
 809
 810 static int
 811 mmc_exec_app_cmd(struct cam_periph *periph, union ccb *ccb,
 812         struct mmc_command *cmd) {
 813         int err;
 814
 815         /* Send APP_CMD first */
 816         memset(&ccb->mmcio.cmd, 0, sizeof(struct mmc_command));
 817         memset(&ccb->mmcio.stop, 0, sizeof(struct mmc_command));
 818         cam_fill_mmcio(&ccb->mmcio,
 819                        /*retries*/ 0,
 820                        /*cbfcnp*/ NULL,
 821                        /*flags*/ CAM_DIR_NONE,
 822                        /*mmc_opcode*/ MMC_APP_CMD,
 823                        /*mmc_arg*/ get_rca(periph) << 16,
 824                        /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_AC,
 825                        /*mmc_data*/ NULL,
 826                        /*timeout*/ 0);
 827
 828         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 829         err = mmc_handle_reply(ccb);
 830         if (err != 0)
 831                 return (err);
 832         if (!(ccb->mmcio.cmd.resp[0] & R1_APP_CMD))
 833                 return (EIO);
 834
 835         /* Now exec actual command */
 836         int flags = 0;
 837         if (cmd->data != NULL) {
 838                 ccb->mmcio.cmd.data = cmd->data;
 839                 if (cmd->data->flags & MMC_DATA_READ)
 840                         flags |= CAM_DIR_IN;
 841                 if (cmd->data->flags & MMC_DATA_WRITE)
 842                         flags |= CAM_DIR_OUT;
 843         } else flags = CAM_DIR_NONE;
 844
 845         cam_fill_mmcio(&ccb->mmcio,
 846                        /*retries*/ 0,
 847                        /*cbfcnp*/ NULL,
 848                        /*flags*/ flags,
 849                        /*mmc_opcode*/ cmd->opcode,
 850                        /*mmc_arg*/ cmd->arg,
 851                        /*mmc_flags*/ cmd->flags,
 852                        /*mmc_data*/ cmd->data,
 853                        /*timeout*/ 0);
 854
 855         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 856         err = mmc_handle_reply(ccb);
 857         if (err != 0)
 858                 return (err);
 859         memcpy(cmd->resp, ccb->mmcio.cmd.resp, sizeof(cmd->resp));
 860         cmd->error = ccb->mmcio.cmd.error;
 861
 862         return (0);
 863 }
 864
 865 static int
 866 mmc_app_get_scr(struct cam_periph *periph, union ccb *ccb, uint32_t *rawscr) {
 867         int err;
 868         struct mmc_command cmd;
 869         struct mmc_data d;
 870
 871         memset(&cmd, 0, sizeof(cmd));
 872         memset(&d, 0, sizeof(d));
 873
 874         memset(rawscr, 0, 8);
 875         cmd.opcode = ACMD_SEND_SCR;
 876         cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
 877         cmd.arg = 0;
 878
 879         d.data = rawscr;
 880         d.len = 8;
 881         d.flags = MMC_DATA_READ;
 882         cmd.data = &d;
 883
 884         err = mmc_exec_app_cmd(periph, ccb, &cmd);
 885         rawscr[0] = be32toh(rawscr[0]);
 886         rawscr[1] = be32toh(rawscr[1]);
 887         return (err);
 888 }
 889
 890 static int
 891 mmc_send_ext_csd(struct cam_periph *periph, union ccb *ccb,
 892                  uint8_t *rawextcsd, size_t buf_len) {
 893         int err;
 894         struct mmc_data d;
 895
 896         KASSERT(buf_len == 512, ("Buffer for ext csd must be 512 bytes"));
 897         memset(&d, 0, sizeof(d));
 898         d.data = rawextcsd;
 899         d.len = buf_len;
 900         d.flags = MMC_DATA_READ;
 901         memset(d.data, 0, d.len);
 902
 903         cam_fill_mmcio(&ccb->mmcio,
 904                        /*retries*/ 0,
 905                        /*cbfcnp*/ NULL,
 906                        /*flags*/ CAM_DIR_IN,
 907                        /*mmc_opcode*/ MMC_SEND_EXT_CSD,
 908                        /*mmc_arg*/ 0,
 909                        /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC,
 910                        /*mmc_data*/ &d,
 911                        /*timeout*/ 0);
 912
 913         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 914         err = mmc_handle_reply(ccb);
 915         return (err);
 916 }
 917
 918 static void
 919 mmc_app_decode_scr(uint32_t *raw_scr, struct mmc_scr *scr)
 920 {
 921         unsigned int scr_struct;
 922
 923         memset(scr, 0, sizeof(*scr));
 924
 925         scr_struct = mmc_get_bits(raw_scr, 64, 60, 4);
 926         if (scr_struct != 0) {
 927                 printf("Unrecognised SCR structure version %d\n",
 928                     scr_struct);
 929                 return;
 930         }
 931         scr->sda_vsn = mmc_get_bits(raw_scr, 64, 56, 4);
 932         scr->bus_widths = mmc_get_bits(raw_scr, 64, 48, 4);
 933 }
 934
 935 static inline void
 936 mmc_switch_fill_mmcio(union ccb *ccb,
 937     uint8_t set, uint8_t index, uint8_t value, u_int timeout)
 938 {
 939         int arg = (MMC_SWITCH_FUNC_WR << 24) |
 940             (index << 16) |
 941             (value << 8) |
 942             set;
 943
 944         cam_fill_mmcio(&ccb->mmcio,
 945                        /*retries*/ 0,
 946                        /*cbfcnp*/ NULL,
 947                        /*flags*/ CAM_DIR_NONE,
 948                        /*mmc_opcode*/ MMC_SWITCH_FUNC,
 949                        /*mmc_arg*/ arg,
 950                        /*mmc_flags*/ MMC_RSP_R1B | MMC_CMD_AC,
 951                        /*mmc_data*/ NULL,
 952                        /*timeout*/ timeout);
 953 }
 954
 955 static int
 956 mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca)
 957 {
 958         int flags, err;
 959
 960         flags = (rca ? MMC_RSP_R1B : MMC_RSP_NONE) | MMC_CMD_AC;
 961         cam_fill_mmcio(&ccb->mmcio,
 962                        /*retries*/ 0,
 963                        /*cbfcnp*/ NULL,
 964                        /*flags*/ CAM_DIR_IN,
 965                        /*mmc_opcode*/ MMC_SELECT_CARD,
 966                        /*mmc_arg*/ rca << 16,
 967                        /*mmc_flags*/ flags,
 968                        /*mmc_data*/ NULL,
 969                        /*timeout*/ 0);
 970
 971         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 972         err = mmc_handle_reply(ccb);
 973         return (err);
 974 }
 975
 976 static int
 977 mmc_switch(struct cam_periph *periph, union ccb *ccb,
 978     uint8_t set, uint8_t index, uint8_t value, u_int timeout)
 979 {
 980         int err;
 981
 982         mmc_switch_fill_mmcio(ccb, set, index, value, timeout);
 983         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 984         err = mmc_handle_reply(ccb);
 985         return (err);
 986 }
 987
 988 static uint32_t
 989 mmc_get_spec_vers(struct cam_periph *periph) {
 990         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 991
 992         return (softc->csd.spec_vers);
 993 }
 994
 995 static uint64_t
 996 mmc_get_media_size(struct cam_periph *periph) {
 997         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 998
 999         return (softc->mediasize);
1000 }
1001
1002 static uint32_t
1003 mmc_get_cmd6_timeout(struct cam_periph *periph)
1004 {
1005         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1006
1007         if (mmc_get_spec_vers(periph) >= 6)
1008                 return (softc->raw_ext_csd[EXT_CSD_GEN_CMD6_TIME] * 10);
1009         return (500 * 1000);
1010 }
1011
1012 static int
1013 mmc_sd_switch(struct cam_periph *periph, union ccb *ccb,
1014               uint8_t mode, uint8_t grp, uint8_t value,
1015               uint8_t *res) {
1016
1017         struct mmc_data mmc_d;
1018         uint32_t arg;
1019         int err;
1020
1021         memset(res, 0, 64);
1022         memset(&mmc_d, 0, sizeof(mmc_d));
1023         mmc_d.len = 64;
1024         mmc_d.data = res;
1025         mmc_d.flags = MMC_DATA_READ;
1026
1027         arg = mode << 31;                       /* 0 - check, 1 - set */
1028         arg |= 0x00FFFFFF;
1029         arg &= ~(0xF << (grp * 4));
1030         arg |= value << (grp * 4);
1031
1032         cam_fill_mmcio(&ccb->mmcio,
1033                        /*retries*/ 0,
1034                        /*cbfcnp*/ NULL,
1035                        /*flags*/ CAM_DIR_IN,
1036                        /*mmc_opcode*/ SD_SWITCH_FUNC,
1037                        /*mmc_arg*/ arg,
1038                        /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC,
1039                        /*mmc_data*/ &mmc_d,
1040                        /*timeout*/ 0);
1041
1042         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
1043         err = mmc_handle_reply(ccb);
1044         return (err);
1045 }
1046
1047 static int
1048 mmc_set_timing(struct cam_periph *periph,
1049                union ccb *ccb,
1050                enum mmc_bus_timing timing)
1051 {
1052         u_char switch_res[64];
1053         int err;
1054         uint8_t value;
1055         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1056         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1057
1058         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
1059                   ("mmc_set_timing(timing=%d)", timing));
1060         switch (timing) {
1061         case bus_timing_normal:
1062                 value = 0;
1063                 break;
1064         case bus_timing_hs:
1065                 value = 1;
1066                 break;
1067         default:
1068                 return (MMC_ERR_INVALID);
1069         }
1070         if (mmcp->card_features & CARD_FEATURE_MMC) {
1071                 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL,
1072                     EXT_CSD_HS_TIMING, value, softc->cmd6_time);
1073         } else {
1074                 err = mmc_sd_switch(periph, ccb, SD_SWITCH_MODE_SET, SD_SWITCH_GROUP1, value, switch_res);
1075         }
1076
1077         /* Set high-speed timing on the host */
1078         struct ccb_trans_settings_mmc *cts;
1079         cts = &ccb->cts.proto_specific.mmc;
1080         ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1081         ccb->ccb_h.flags = CAM_DIR_NONE;
1082         ccb->ccb_h.retry_count = 0;
1083         ccb->ccb_h.timeout = 100;
1084         ccb->ccb_h.cbfcnp = NULL;
1085         cts->ios.timing = timing;
1086         cts->ios_valid = MMC_BT;
1087         xpt_action(ccb);
1088
1089         return (err);
1090 }
1091
1092 static void
1093 sdda_start_init_task(void *context, int pending) {
1094         union ccb *new_ccb;
1095         struct cam_periph *periph;
1096
1097         periph = (struct cam_periph *)context;
1098         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init_task\n"));
1099         new_ccb = xpt_alloc_ccb();
1100         xpt_setup_ccb(&new_ccb->ccb_h, periph->path,
1101                       CAM_PRIORITY_NONE);
1102
1103         cam_periph_lock(periph);
1104         sdda_start_init(context, new_ccb);
1105         cam_periph_unlock(periph);
1106         xpt_free_ccb(new_ccb);
1107 }
1108
1109 static void
1110 sdda_set_bus_width(struct cam_periph *periph, union ccb *ccb, int width) {
1111         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1112         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1113         int err;
1114
1115         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_set_bus_width\n"));
1116
1117         /* First set for the card, then for the host */
1118         if (mmcp->card_features & CARD_FEATURE_MMC) {
1119                 uint8_t value;
1120                 switch (width) {
1121                 case bus_width_1:
1122                         value = EXT_CSD_BUS_WIDTH_1;
1123                         break;
1124                 case bus_width_4:
1125                         value = EXT_CSD_BUS_WIDTH_4;
1126                         break;
1127                 case bus_width_8:
1128                         value = EXT_CSD_BUS_WIDTH_8;
1129                         break;
1130                 default:
1131                         panic("Invalid bus width %d", width);
1132                 }
1133                 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL,
1134                     EXT_CSD_BUS_WIDTH, value, softc->cmd6_time);
1135         } else {
1136                 /* For SD cards we send ACMD6 with the required bus width in arg */
1137                 struct mmc_command cmd;
1138                 memset(&cmd, 0, sizeof(struct mmc_command));
1139                 cmd.opcode = ACMD_SET_BUS_WIDTH;
1140                 cmd.arg = width;
1141                 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
1142                 err = mmc_exec_app_cmd(periph, ccb, &cmd);
1143         }
1144
1145         if (err != MMC_ERR_NONE) {
1146                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Error %d when setting bus width on the card\n", err));
1147                 return;
1148         }
1149         /* Now card is done, set the host to the same width */
1150         struct ccb_trans_settings_mmc *cts;
1151         cts = &ccb->cts.proto_specific.mmc;
1152         ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1153         ccb->ccb_h.flags = CAM_DIR_NONE;
1154         ccb->ccb_h.retry_count = 0;
1155         ccb->ccb_h.timeout = 100;
1156         ccb->ccb_h.cbfcnp = NULL;
1157         cts->ios.bus_width = width;
1158         cts->ios_valid = MMC_BW;
1159         xpt_action(ccb);
1160 }
1161
1162 static inline const char
1163 *part_type(u_int type)
1164 {
1165
1166         switch (type) {
1167         case EXT_CSD_PART_CONFIG_ACC_RPMB:
1168                 return ("RPMB");
1169         case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
1170                 return ("default");
1171         case EXT_CSD_PART_CONFIG_ACC_BOOT0:
1172                 return ("boot0");
1173         case EXT_CSD_PART_CONFIG_ACC_BOOT1:
1174                 return ("boot1");
1175         case EXT_CSD_PART_CONFIG_ACC_GP0:
1176         case EXT_CSD_PART_CONFIG_ACC_GP1:
1177         case EXT_CSD_PART_CONFIG_ACC_GP2:
1178         case EXT_CSD_PART_CONFIG_ACC_GP3:
1179                 return ("general purpose");
1180         default:
1181                 return ("(unknown type)");
1182         }
1183 }
1184
1185 static inline const char
1186 *bus_width_str(enum mmc_bus_width w)
1187 {
1188
1189         switch (w) {
1190         case bus_width_1:
1191                 return ("1-bit");
1192         case bus_width_4:
1193                 return ("4-bit");
1194         case bus_width_8:
1195                 return ("8-bit");
1196         }
1197 }
1198
1199 static uint32_t
1200 sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb)
1201 {
1202         struct ccb_trans_settings_mmc *cts;
1203
1204         cts = &ccb->cts.proto_specific.mmc;
1205
1206         ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1207         ccb->ccb_h.flags = CAM_DIR_NONE;
1208         ccb->ccb_h.retry_count = 0;
1209         ccb->ccb_h.timeout = 100;
1210         ccb->ccb_h.cbfcnp = NULL;
1211         xpt_action(ccb);
1212
1213         if (ccb->ccb_h.status != CAM_REQ_CMP)
1214                 panic("Cannot get host caps");
1215         return (cts->host_caps);
1216 }
1217
1218 static uint32_t
1219 sdda_get_max_data(struct cam_periph *periph, union ccb *ccb)
1220 {
1221         struct ccb_trans_settings_mmc *cts;
1222
1223         cts = &ccb->cts.proto_specific.mmc;
1224         memset(cts, 0, sizeof(struct ccb_trans_settings_mmc));
1225
1226         ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1227         ccb->ccb_h.flags = CAM_DIR_NONE;
1228         ccb->ccb_h.retry_count = 0;
1229         ccb->ccb_h.timeout = 100;
1230         ccb->ccb_h.cbfcnp = NULL;
1231         xpt_action(ccb);
1232
1233         if (ccb->ccb_h.status != CAM_REQ_CMP)
1234                 panic("Cannot get host max data");
1235         KASSERT(cts->host_max_data != 0, ("host_max_data == 0?!"));
1236         return (cts->host_max_data);
1237 }
1238
1239 static void
1240 sdda_start_init(void *context, union ccb *start_ccb)
1241 {
1242         struct cam_periph *periph = (struct cam_periph *)context;
1243         struct ccb_trans_settings_mmc *cts;
1244         uint32_t host_caps;
1245         uint32_t sec_count;
1246         int err;
1247         int host_f_max;
1248
1249         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init\n"));
1250         /* periph was held for us when this task was enqueued */
1251         if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
1252                 cam_periph_release(periph);
1253                 return;
1254         }
1255
1256         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1257         //struct ccb_mmcio *mmcio = &start_ccb->mmcio;
1258         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1259         struct cam_ed *device = periph->path->device;
1260
1261         if (mmcp->card_features & CARD_FEATURE_MMC) {
1262                 mmc_decode_csd_mmc(mmcp->card_csd, &softc->csd);
1263                 mmc_decode_cid_mmc(mmcp->card_cid, &softc->cid);
1264                 if (mmc_get_spec_vers(periph) >= 4) {
1265                         err = mmc_send_ext_csd(periph, start_ccb,
1266                                                (uint8_t *)&softc->raw_ext_csd,
1267                                                sizeof(softc->raw_ext_csd));
1268                         if (err != 0) {
1269                                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1270                                     ("Cannot read EXT_CSD, err %d", err));
1271                                 return;
1272                         }
1273                 }
1274         } else {
1275                 mmc_decode_csd_sd(mmcp->card_csd, &softc->csd);
1276                 mmc_decode_cid_sd(mmcp->card_cid, &softc->cid);
1277         }
1278
1279         softc->sector_count = softc->csd.capacity / 512;
1280         softc->mediasize = softc->csd.capacity;
1281         softc->cmd6_time = mmc_get_cmd6_timeout(periph);
1282
1283         /* MMC >= 4.x have EXT_CSD that has its own opinion about capacity */
1284         if (mmc_get_spec_vers(periph) >= 4) {
1285                 sec_count = softc->raw_ext_csd[EXT_CSD_SEC_CNT] +
1286                     (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 1] << 8) +
1287                     (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 2] << 16) +
1288                     (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
1289                 if (sec_count != 0) {
1290                         softc->sector_count = sec_count;
1291                         softc->mediasize = softc->sector_count * 512;
1292                         /* FIXME: there should be a better name for this option...*/
1293                         mmcp->card_features |= CARD_FEATURE_SDHC;
1294                 }
1295
1296         }
1297         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1298             ("Capacity: %"PRIu64", sectors: %"PRIu64"\n",
1299                 softc->mediasize,
1300                 softc->sector_count));
1301         mmc_format_card_id_string(softc, mmcp);
1302
1303         /* Update info for CAM */
1304         device->serial_num_len = strlen(softc->card_sn_string);
1305         device->serial_num = (u_int8_t *)malloc((device->serial_num_len + 1),
1306             M_CAMXPT, M_NOWAIT);
1307         strlcpy(device->serial_num, softc->card_sn_string, device->serial_num_len);
1308
1309         device->device_id_len = strlen(softc->card_id_string);
1310         device->device_id = (u_int8_t *)malloc((device->device_id_len + 1),
1311             M_CAMXPT, M_NOWAIT);
1312         strlcpy(device->device_id, softc->card_id_string, device->device_id_len);
1313
1314         strlcpy(mmcp->model, softc->card_id_string, sizeof(mmcp->model));
1315
1316         /* Set the clock frequency that the card can handle */
1317         cts = &start_ccb->cts.proto_specific.mmc;
1318
1319         /* First, get the host's max freq */
1320         start_ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1321         start_ccb->ccb_h.flags = CAM_DIR_NONE;
1322         start_ccb->ccb_h.retry_count = 0;
1323         start_ccb->ccb_h.timeout = 100;
1324         start_ccb->ccb_h.cbfcnp = NULL;
1325         xpt_action(start_ccb);
1326
1327         if (start_ccb->ccb_h.status != CAM_REQ_CMP)
1328                 panic("Cannot get max host freq");
1329         host_f_max = cts->host_f_max;
1330         host_caps = cts->host_caps;
1331         if (cts->ios.bus_width != bus_width_1)
1332                 panic("Bus width in ios is not 1-bit");
1333
1334         /* Now check if the card supports High-speed */
1335         softc->card_f_max = softc->csd.tran_speed;
1336
1337         if (host_caps & MMC_CAP_HSPEED) {
1338                 /* Find out if the card supports High speed timing */
1339                 if (mmcp->card_features & CARD_FEATURE_SD20) {
1340                         /* Get and decode SCR */
1341                         uint32_t rawscr[2];
1342                         uint8_t res[64];
1343                         if (mmc_app_get_scr(periph, start_ccb, rawscr)) {
1344                                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Cannot get SCR\n"));
1345                                 goto finish_hs_tests;
1346                         }
1347                         mmc_app_decode_scr(rawscr, &softc->scr);
1348
1349                         if ((softc->scr.sda_vsn >= 1) && (softc->csd.ccc & (1<<10))) {
1350                                 mmc_sd_switch(periph, start_ccb, SD_SWITCH_MODE_CHECK,
1351                                               SD_SWITCH_GROUP1, SD_SWITCH_NOCHANGE, res);
1352                                 if (res[13] & 2) {
1353                                         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS\n"));
1354                                         softc->card_f_max = SD_HS_MAX;
1355                                 }
1356
1357                                 /*
1358                                  * We deselect then reselect the card here.  Some cards
1359                                  * become unselected and timeout with the above two
1360                                  * commands, although the state tables / diagrams in the
1361                                  * standard suggest they go back to the transfer state.
1362                                  * Other cards don't become deselected, and if we
1363                                  * attempt to blindly re-select them, we get timeout
1364                                  * errors from some controllers.  So we deselect then
1365                                  * reselect to handle all situations.
1366                                  */
1367                                 mmc_select_card(periph, start_ccb, 0);
1368                                 mmc_select_card(periph, start_ccb, get_rca(periph));
1369                         } else {
1370                                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Not trying the switch\n"));
1371                                 goto finish_hs_tests;
1372                         }
1373                 }
1374
1375                 if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) {
1376                         if (softc->raw_ext_csd[EXT_CSD_CARD_TYPE]
1377                             & EXT_CSD_CARD_TYPE_HS_52)
1378                                 softc->card_f_max = MMC_TYPE_HS_52_MAX;
1379                         else if (softc->raw_ext_csd[EXT_CSD_CARD_TYPE]
1380                                  & EXT_CSD_CARD_TYPE_HS_26)
1381                                 softc->card_f_max = MMC_TYPE_HS_26_MAX;
1382                 }
1383         }
1384         int f_max;
1385 finish_hs_tests:
1386         f_max = min(host_f_max, softc->card_f_max);
1387         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Set SD freq to %d MHz (min out of host f=%d MHz and card f=%d MHz)\n", f_max  / 1000000, host_f_max / 1000000, softc->card_f_max / 1000000));
1388
1389         /* Enable high-speed timing on the card */
1390         if (f_max > 25000000) {
1391                 err = mmc_set_timing(periph, start_ccb, bus_timing_hs);
1392                 if (err != MMC_ERR_NONE) {
1393                         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("Cannot switch card to high-speed mode"));
1394                         f_max = 25000000;
1395                 }
1396         }
1397         /* Set frequency on the controller */
1398         start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1399         start_ccb->ccb_h.flags = CAM_DIR_NONE;
1400         start_ccb->ccb_h.retry_count = 0;
1401         start_ccb->ccb_h.timeout = 100;
1402         start_ccb->ccb_h.cbfcnp = NULL;
1403         cts->ios.clock = f_max;
1404         cts->ios_valid = MMC_CLK;
1405         xpt_action(start_ccb);
1406
1407         /* Set bus width */
1408         enum mmc_bus_width desired_bus_width = bus_width_1;
1409         enum mmc_bus_width max_host_bus_width =
1410                 (host_caps & MMC_CAP_8_BIT_DATA ? bus_width_8 :
1411                  host_caps & MMC_CAP_4_BIT_DATA ? bus_width_4 : bus_width_1);
1412         enum mmc_bus_width max_card_bus_width = bus_width_1;
1413         if (mmcp->card_features & CARD_FEATURE_SD20 &&
1414             softc->scr.bus_widths & SD_SCR_BUS_WIDTH_4)
1415                 max_card_bus_width = bus_width_4;
1416         /*
1417          * Unlike SD, MMC cards don't have any information about supported bus width...
1418          * So we need to perform read/write test to find out the width.
1419          */
1420         /* TODO: figure out bus width for MMC; use 8-bit for now (to test on BBB) */
1421         if (mmcp->card_features & CARD_FEATURE_MMC)
1422                 max_card_bus_width = bus_width_8;
1423
1424         desired_bus_width = min(max_host_bus_width, max_card_bus_width);
1425         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1426                   ("Set bus width to %s (min of host %s and card %s)\n",
1427                    bus_width_str(desired_bus_width),
1428                    bus_width_str(max_host_bus_width),
1429                    bus_width_str(max_card_bus_width)));
1430         sdda_set_bus_width(periph, start_ccb, desired_bus_width);
1431
1432         softc->state = SDDA_STATE_NORMAL;
1433
1434         /* MMC partitions support */
1435         if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) {
1436                 sdda_process_mmc_partitions(periph, start_ccb);
1437         } else if (mmcp->card_features & CARD_FEATURE_SD20) {
1438                 /* For SD[HC] cards, just add one partition that is the whole card */
1439                 sdda_add_part(periph, 0, "sdda",
1440                     periph->unit_number,
1441                     mmc_get_media_size(periph),
1442                     sdda_get_read_only(periph, start_ccb));
1443                 softc->part_curr = 0;
1444         }
1445
1446         xpt_announce_periph(periph, softc->card_id_string);
1447         /*
1448          * Add async callbacks for bus reset and bus device reset calls.
1449          * I don't bother checking if this fails as, in most cases,
1450          * the system will function just fine without them and the only
1451          * alternative would be to not attach the device on failure.
1452          */
1453         xpt_register_async(AC_LOST_DEVICE | AC_GETDEV_CHANGED |
1454             AC_ADVINFO_CHANGED, sddaasync, periph, periph->path);
1455 }
1456
1457 static void
1458 sdda_add_part(struct cam_periph *periph, u_int type, const char *name,
1459     u_int cnt, off_t media_size, bool ro)
1460 {
1461         struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1462         struct sdda_part *part;
1463         struct ccb_pathinq cpi;
1464
1465         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1466             ("Partition type '%s', size %ju %s\n",
1467             part_type(type),
1468             media_size,
1469             ro ? "(read-only)" : ""));
1470
1471         part = sc->part[type] = malloc(sizeof(*part), M_DEVBUF,
1472             M_WAITOK | M_ZERO);
1473
1474         part->cnt = cnt;
1475         part->type = type;
1476         part->ro = ro;
1477         part->sc = sc;
1478         snprintf(part->name, sizeof(part->name), name, periph->unit_number);
1479
1480         /*
1481          * Due to the nature of RPMB partition it doesn't make much sense
1482          * to add it as a disk. It would be more appropriate to create a
1483          * userland tool to operate on the partition or leverage the existing
1484          * tools from sysutils/mmc-utils.
1485          */
1486         if (type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
1487                 /* TODO: Create device, assign IOCTL handler */
1488                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1489                     ("Don't know what to do with RPMB partitions yet\n"));
1490                 return;
1491         }
1492
1493         bioq_init(&part->bio_queue);
1494
1495         bzero(&cpi, sizeof(cpi));
1496         xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NONE);
1497         cpi.ccb_h.func_code = XPT_PATH_INQ;
1498         xpt_action((union ccb *)&cpi);
1499
1500         /*
1501          * Register this media as a disk
1502          */
1503         (void)cam_periph_hold(periph, PRIBIO);
1504         cam_periph_unlock(periph);
1505
1506         part->disk = disk_alloc();
1507         part->disk->d_rotation_rate = DISK_RR_NON_ROTATING;
1508         part->disk->d_devstat = devstat_new_entry(part->name,
1509             cnt, 512,
1510             DEVSTAT_ALL_SUPPORTED,
1511             DEVSTAT_TYPE_DIRECT | XPORT_DEVSTAT_TYPE(cpi.transport),
1512             DEVSTAT_PRIORITY_DISK);
1513
1514         part->disk->d_open = sddaopen;
1515         part->disk->d_close = sddaclose;
1516         part->disk->d_strategy = sddastrategy;
1517         part->disk->d_getattr = sddagetattr;
1518 //      sc->disk->d_dump = sddadump;
1519         part->disk->d_gone = sddadiskgonecb;
1520         part->disk->d_name = part->name;
1521         part->disk->d_drv1 = part;
1522         part->disk->d_maxsize =
1523             MIN(MAXPHYS, sdda_get_max_data(periph,
1524                     (union ccb *)&cpi) * mmc_get_sector_size(periph));
1525         part->disk->d_unit = cnt;
1526         part->disk->d_flags = 0;
1527         strlcpy(part->disk->d_descr, sc->card_id_string,
1528             MIN(sizeof(part->disk->d_descr), sizeof(sc->card_id_string)));
1529         strlcpy(part->disk->d_ident, sc->card_sn_string,
1530             MIN(sizeof(part->disk->d_ident), sizeof(sc->card_sn_string)));
1531         part->disk->d_hba_vendor = cpi.hba_vendor;
1532         part->disk->d_hba_device = cpi.hba_device;
1533         part->disk->d_hba_subvendor = cpi.hba_subvendor;
1534         part->disk->d_hba_subdevice = cpi.hba_subdevice;
1535
1536         part->disk->d_sectorsize = mmc_get_sector_size(periph);
1537         part->disk->d_mediasize = media_size;
1538         part->disk->d_stripesize = 0;
1539         part->disk->d_fwsectors = 0;
1540         part->disk->d_fwheads = 0;
1541
1542         /*
1543          * Acquire a reference to the periph before we register with GEOM.
1544          * We'll release this reference once GEOM calls us back (via
1545          * sddadiskgonecb()) telling us that our provider has been freed.
1546          */
1547         if (cam_periph_acquire(periph) != 0) {
1548                 xpt_print(periph->path, "%s: lost periph during "
1549                     "registration!\n", __func__);
1550                 cam_periph_lock(periph);
1551                 return;
1552         }
1553         disk_create(part->disk, DISK_VERSION);
1554         cam_periph_lock(periph);
1555         cam_periph_unhold(periph);
1556 }
1557
1558 /*
1559  * For MMC cards, process EXT_CSD and add partitions that are supported by
1560  * this device.
1561  */
1562 static void
1563 sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *ccb)
1564 {
1565         struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1566         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1567         off_t erase_size, sector_size, size, wp_size;
1568         int i;
1569         const uint8_t *ext_csd;
1570         uint8_t rev;
1571         bool comp, ro;
1572
1573         ext_csd = sc->raw_ext_csd;
1574
1575         /*
1576          * Enhanced user data area and general purpose partitions are only
1577          * supported in revision 1.4 (EXT_CSD_REV == 4) and later, the RPMB
1578          * partition in revision 1.5 (MMC v4.41, EXT_CSD_REV == 5) and later.
1579          */
1580         rev = ext_csd[EXT_CSD_REV];
1581
1582         /*
1583          * Ignore user-creatable enhanced user data area and general purpose
1584          * partitions partitions as long as partitioning hasn't been finished.
1585          */
1586         comp = (ext_csd[EXT_CSD_PART_SET] & EXT_CSD_PART_SET_COMPLETED) != 0;
1587
1588         /*
1589          * Add enhanced user data area slice, unless it spans the entirety of
1590          * the user data area.  The enhanced area is of a multiple of high
1591          * capacity write protect groups ((ERASE_GRP_SIZE + HC_WP_GRP_SIZE) *
1592          * 512 KB) and its offset given in either sectors or bytes, depending
1593          * on whether it's a high capacity device or not.
1594          * NB: The slicer and its slices need to be registered before adding
1595          *     the disk for the corresponding user data area as re-tasting is
1596          *     racy.
1597          */
1598         sector_size = mmc_get_sector_size(periph);
1599         size = ext_csd[EXT_CSD_ENH_SIZE_MULT] +
1600                 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
1601                 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16);
1602         if (rev >= 4 && comp == TRUE && size > 0 &&
1603             (ext_csd[EXT_CSD_PART_SUPPORT] &
1604                 EXT_CSD_PART_SUPPORT_ENH_ATTR_EN) != 0 &&
1605             (ext_csd[EXT_CSD_PART_ATTR] & (EXT_CSD_PART_ATTR_ENH_USR)) != 0) {
1606                 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
1607                         MMC_SECTOR_SIZE;
1608                 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1609                 size *= erase_size * wp_size;
1610                 if (size != mmc_get_media_size(periph) * sector_size) {
1611                         sc->enh_size = size;
1612                         sc->enh_base = (ext_csd[EXT_CSD_ENH_START_ADDR] +
1613                             (ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
1614                             (ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
1615                             (ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24)) *
1616                                 ((mmcp->card_features & CARD_FEATURE_SDHC) ? 1: MMC_SECTOR_SIZE);
1617                 } else
1618                         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1619                             ("enhanced user data area spans entire device"));
1620         }
1621
1622         /*
1623          * Add default partition.  This may be the only one or the user
1624          * data area in case partitions are supported.
1625          */
1626         ro = sdda_get_read_only(periph, ccb);
1627         sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_DEFAULT, "sdda",
1628             periph->unit_number, mmc_get_media_size(periph), ro);
1629         sc->part_curr = EXT_CSD_PART_CONFIG_ACC_DEFAULT;
1630
1631         if (mmc_get_spec_vers(periph) < 3)
1632                 return;
1633
1634         /* Belatedly announce enhanced user data slice. */
1635         if (sc->enh_size != 0) {
1636                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1637                     ("enhanced user data area off 0x%jx size %ju bytes\n",
1638                         sc->enh_base, sc->enh_size));
1639         }
1640
1641         /*
1642          * Determine partition switch timeout (provided in units of 10 ms)
1643          * and ensure it's at least 300 ms as some eMMC chips lie.
1644          */
1645         sc->part_time = max(ext_csd[EXT_CSD_PART_SWITCH_TO] * 10 * 1000,
1646             300 * 1000);
1647
1648         /* Add boot partitions, which are of a fixed multiple of 128 KB. */
1649         size = ext_csd[EXT_CSD_BOOT_SIZE_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
1650         if (size > 0 && (sdda_get_host_caps(periph, ccb) & MMC_CAP_BOOT_NOACC) == 0) {
1651                 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT0,
1652                     SDDA_FMT_BOOT, 0, size,
1653                     ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
1654                     EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK) != 0));
1655                 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT1,
1656                     SDDA_FMT_BOOT, 1, size,
1657                     ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
1658                     EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK) != 0));
1659         }
1660
1661         /* Add RPMB partition, which also is of a fixed multiple of 128 KB. */
1662         size = ext_csd[EXT_CSD_RPMB_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
1663         if (rev >= 5 && size > 0)
1664                 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_RPMB,
1665                     SDDA_FMT_RPMB, 0, size, ro);
1666
1667         if (rev <= 3 || comp == FALSE)
1668                 return;
1669
1670         /*
1671          * Add general purpose partitions, which are of a multiple of high
1672          * capacity write protect groups, too.
1673          */
1674         if ((ext_csd[EXT_CSD_PART_SUPPORT] & EXT_CSD_PART_SUPPORT_EN) != 0) {
1675                 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
1676                         MMC_SECTOR_SIZE;
1677                 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1678                 for (i = 0; i < MMC_PART_GP_MAX; i++) {
1679                         size = ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3] +
1680                                 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 1] << 8) +
1681                                 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 2] << 16);
1682                         if (size == 0)
1683                                 continue;
1684                         sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_GP0 + i,
1685                             SDDA_FMT_GP, i, size * erase_size * wp_size, ro);
1686                 }
1687         }
1688 }
1689
1690 /*
1691  * We cannot just call mmc_switch() since it will sleep, and we are in
1692  * GEOM context and cannot sleep. Instead, create an MMCIO request to switch
1693  * partitions and send it to h/w, and upon completion resume processing
1694  * the I/O queue.
1695  * This function cannot fail, instead check switch errors in sddadone().
1696  */
1697 static void
1698 sdda_init_switch_part(struct cam_periph *periph, union ccb *start_ccb, u_int part) {
1699         struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1700         uint8_t value;
1701
1702         sc->part_requested = part;
1703
1704         value = (sc->raw_ext_csd[EXT_CSD_PART_CONFIG] &
1705             ~EXT_CSD_PART_CONFIG_ACC_MASK) | part;
1706
1707         mmc_switch_fill_mmcio(start_ccb, EXT_CSD_CMD_SET_NORMAL,
1708             EXT_CSD_PART_CONFIG, value, sc->part_time);
1709         start_ccb->ccb_h.cbfcnp = sddadone;
1710
1711         sc->outstanding_cmds++;
1712         cam_periph_unlock(periph);
1713         xpt_action(start_ccb);
1714         cam_periph_lock(periph);
1715 }
1716
1717 /* Called with periph lock held! */
1718 static void
1719 sddastart(struct cam_periph *periph, union ccb *start_ccb)
1720 {
1721         struct bio *bp;
1722         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1723         struct sdda_part *part;
1724         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1725         int part_index;
1726
1727         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastart\n"));
1728
1729         if (softc->state != SDDA_STATE_NORMAL) {
1730                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("device is not in SDDA_STATE_NORMAL yet\n"));
1731                 xpt_release_ccb(start_ccb);
1732                 return;
1733         }
1734
1735         /* Find partition that has outstanding commands.  Prefer current partition. */
1736         part = softc->part[softc->part_curr];
1737         bp = bioq_first(&part->bio_queue);
1738         if (bp == NULL) {
1739                 for (part_index = 0; part_index < MMC_PART_MAX; part_index++) {
1740                         if ((part = softc->part[part_index]) != NULL &&
1741                             (bp = bioq_first(&softc->part[part_index]->bio_queue)) != NULL)
1742                                 break;
1743                 }
1744         }
1745         if (bp == NULL) {
1746                 xpt_release_ccb(start_ccb);
1747                 return;
1748         }
1749         if (part_index != softc->part_curr) {
1750                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1751                     ("Partition  %d -> %d\n", softc->part_curr, part_index));
1752                 /*
1753                  * According to section "6.2.2 Command restrictions" of the eMMC
1754                  * specification v5.1, CMD19/CMD21 aren't allowed to be used with
1755                  * RPMB partitions.  So we pause re-tuning along with triggering
1756                  * it up-front to decrease the likelihood of re-tuning becoming
1757                  * necessary while accessing an RPMB partition.  Consequently, an
1758                  * RPMB partition should immediately be switched away from again
1759                  * after an access in order to allow for re-tuning to take place
1760                  * anew.
1761                  */
1762                 /* TODO: pause retune if switching to RPMB partition */
1763                 softc->state = SDDA_STATE_PART_SWITCH;
1764                 sdda_init_switch_part(periph, start_ccb, part_index);
1765                 return;
1766         }
1767
1768         bioq_remove(&part->bio_queue, bp);
1769
1770         switch (bp->bio_cmd) {
1771         case BIO_WRITE:
1772                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_WRITE\n"));
1773                 part->flags |= SDDA_FLAG_DIRTY;
1774                 /* FALLTHROUGH */
1775         case BIO_READ:
1776         {
1777                 struct ccb_mmcio *mmcio;
1778                 uint64_t blockno = bp->bio_pblkno;
1779                 uint16_t count = bp->bio_bcount / 512;
1780                 uint16_t opcode;
1781
1782                 if (bp->bio_cmd == BIO_READ)
1783                         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_READ\n"));
1784                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
1785                     ("Block %"PRIu64" cnt %u\n", blockno, count));
1786
1787                 /* Construct new MMC command */
1788                 if (bp->bio_cmd == BIO_READ) {
1789                         if (count > 1)
1790                                 opcode = MMC_READ_MULTIPLE_BLOCK;
1791                         else
1792                                 opcode = MMC_READ_SINGLE_BLOCK;
1793                 } else {
1794                         if (count > 1)
1795                                 opcode = MMC_WRITE_MULTIPLE_BLOCK;
1796                         else
1797                                 opcode = MMC_WRITE_BLOCK;
1798                 }
1799
1800                 start_ccb->ccb_h.func_code = XPT_MMC_IO;
1801                 start_ccb->ccb_h.flags = (bp->bio_cmd == BIO_READ ? CAM_DIR_IN : CAM_DIR_OUT);
1802                 start_ccb->ccb_h.retry_count = 0;
1803                 start_ccb->ccb_h.timeout = 15 * 1000;
1804                 start_ccb->ccb_h.cbfcnp = sddadone;
1805
1806                 mmcio = &start_ccb->mmcio;
1807                 mmcio->cmd.opcode = opcode;
1808                 mmcio->cmd.arg = blockno;
1809                 if (!(mmcp->card_features & CARD_FEATURE_SDHC))
1810                         mmcio->cmd.arg <<= 9;
1811
1812                 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1813                 mmcio->cmd.data = softc->mmcdata;
1814                 memset(mmcio->cmd.data, 0, sizeof(struct mmc_data));
1815                 mmcio->cmd.data->data = bp->bio_data;
1816                 mmcio->cmd.data->len = 512 * count;
1817                 mmcio->cmd.data->flags = (bp->bio_cmd == BIO_READ ? MMC_DATA_READ : MMC_DATA_WRITE);
1818                 /* Direct h/w to issue CMD12 upon completion */
1819                 if (count > 1) {
1820                         mmcio->cmd.data->flags |= MMC_DATA_MULTI;
1821                         mmcio->stop.opcode = MMC_STOP_TRANSMISSION;
1822                         mmcio->stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
1823                         mmcio->stop.arg = 0;
1824                 }
1825
1826                 break;
1827         }
1828         case BIO_FLUSH:
1829                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_FLUSH\n"));
1830                 sddaschedule(periph);
1831                 break;
1832         case BIO_DELETE:
1833                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_DELETE\n"));
1834                 sddaschedule(periph);
1835                 break;
1836         }
1837         start_ccb->ccb_h.ccb_bp = bp;
1838         softc->outstanding_cmds++;
1839         softc->refcount++;
1840         cam_periph_unlock(periph);
1841         xpt_action(start_ccb);
1842         cam_periph_lock(periph);
1843
1844         /* May have more work to do, so ensure we stay scheduled */
1845         sddaschedule(periph);
1846 }
1847
1848 static void
1849 sddadone(struct cam_periph *periph, union ccb *done_ccb)
1850 {
1851         struct bio *bp;
1852         struct sdda_softc *softc;
1853         struct ccb_mmcio *mmcio;
1854         struct cam_path *path;
1855         uint32_t card_status;
1856         int error = 0;
1857
1858         softc = (struct sdda_softc *)periph->softc;
1859         mmcio = &done_ccb->mmcio;
1860         path = done_ccb->ccb_h.path;
1861
1862         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddadone\n"));
1863 //        cam_periph_lock(periph);
1864         if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
1865                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("Error!!!\n"));
1866                 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
1867                         cam_release_devq(path,
1868                             /*relsim_flags*/0,
1869                             /*reduction*/0,
1870                             /*timeout*/0,
1871                             /*getcount_only*/0);
1872                 error = 5; /* EIO */
1873         } else {
1874                 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
1875                         panic("REQ_CMP with QFRZN");
1876                 error = 0;
1877         }
1878
1879         card_status = mmcio->cmd.resp[0];
1880         CAM_DEBUG(path, CAM_DEBUG_TRACE,
1881             ("Card status: %08x\n", R1_STATUS(card_status)));
1882         CAM_DEBUG(path, CAM_DEBUG_TRACE,
1883             ("Current state: %d\n", R1_CURRENT_STATE(card_status)));
1884
1885         /* Process result of switching MMC partitions */
1886         if (softc->state == SDDA_STATE_PART_SWITCH) {
1887                 CAM_DEBUG(path, CAM_DEBUG_TRACE,
1888                     ("Compteting partition switch to %d\n", softc->part_requested));
1889                 softc->outstanding_cmds--;
1890                 /* Complete partition switch */
1891                 softc->state = SDDA_STATE_NORMAL;
1892                 if (error != MMC_ERR_NONE) {
1893                         /* TODO: Unpause retune if accessing RPMB */
1894                         xpt_release_ccb(done_ccb);
1895                         xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1896                         return;
1897                 }
1898
1899                 softc->raw_ext_csd[EXT_CSD_PART_CONFIG] =
1900                     (softc->raw_ext_csd[EXT_CSD_PART_CONFIG] &
1901                         ~EXT_CSD_PART_CONFIG_ACC_MASK) | softc->part_requested;
1902                 /* TODO: Unpause retune if accessing RPMB */
1903                 softc->part_curr = softc->part_requested;
1904                 xpt_release_ccb(done_ccb);
1905
1906                 /* Return to processing BIO requests */
1907                 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1908                 return;
1909         }
1910
1911         bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
1912         bp->bio_error = error;
1913         if (error != 0) {
1914                 bp->bio_resid = bp->bio_bcount;
1915                 bp->bio_flags |= BIO_ERROR;
1916         } else {
1917                 /* XXX: How many bytes remaining? */
1918                 bp->bio_resid = 0;
1919                 if (bp->bio_resid > 0)
1920                         bp->bio_flags |= BIO_ERROR;
1921         }
1922
1923         softc->outstanding_cmds--;
1924         xpt_release_ccb(done_ccb);
1925         /*
1926          * Release the periph refcount taken in sddastart() for each CCB.
1927          */
1928         KASSERT(softc->refcount >= 1, ("sddadone softc %p refcount %d", softc, softc->refcount));
1929         softc->refcount--;
1930         biodone(bp);
1931 }
1932
1933 static int
1934 sddaerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
1935 {
1936         return(cam_periph_error(ccb, cam_flags, sense_flags));
1937 }
1938 #endif /* _KERNEL */