2 * SPDX-License-Identifier: BSD-2-Clause
4 * Copyright (c) 2006 Bernd Walter <tisco@FreeBSD.org> All rights reserved.
5 * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org> All rights reserved.
6 * Copyright (c) 2015-2017 Ilya Bakulin <kibab@FreeBSD.org> All rights reserved.
7 * Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer,
14 * without modification, immediately at the beginning of the file.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 * Some code derived from the sys/dev/mmc and sys/cam/ata
31 * Thanks to Warner Losh <imp@FreeBSD.org>, Alexander Motin <mav@FreeBSD.org>
32 * Bernd Walter <tisco@FreeBSD.org>, and other authors.
35 //#include "opt_sdda.h"
37 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/kernel.h>
43 #include <sys/sysctl.h>
44 #include <sys/endian.h>
45 #include <sys/taskqueue.h>
47 #include <sys/mutex.h>
49 #include <sys/devicestat.h>
50 #include <sys/eventhandler.h>
51 #include <sys/malloc.h>
54 #include <sys/reboot.h>
55 #include <geom/geom_disk.h>
56 #include <machine/_inttypes.h> /* for PRIu64 */
65 #include <cam/cam_ccb.h>
66 #include <cam/cam_queue.h>
67 #include <cam/cam_periph.h>
68 #include <cam/cam_sim.h>
69 #include <cam/cam_xpt.h>
70 #include <cam/cam_xpt_sim.h>
71 #include <cam/cam_xpt_periph.h>
72 #include <cam/cam_xpt_internal.h>
73 #include <cam/cam_debug.h>
75 #include <cam/mmc/mmc_all.h>
80 SDDA_FLAG_OPEN = 0x0002,
81 SDDA_FLAG_DIRTY = 0x0004
88 SDDA_STATE_PART_SWITCH,
91 #define SDDA_FMT_BOOT "sdda%dboot"
92 #define SDDA_FMT_GP "sdda%dgp"
93 #define SDDA_FMT_RPMB "sdda%drpmb"
94 #define SDDA_LABEL_ENH "enh"
96 #define SDDA_PART_NAMELEN (16 + 1)
102 struct bio_queue_head bio_queue;
104 struct sdda_softc *sc;
108 char name[SDDA_PART_NAMELEN];
112 int outstanding_cmds; /* Number of active commands */
113 int refcount; /* Active xpt_action() calls */
115 struct mmc_data *mmcdata;
116 struct cam_periph *periph;
117 // sdda_quirks quirks;
118 struct task start_init_task;
120 uint8_t raw_ext_csd[512]; /* MMC only? */
124 /* Calculated from CSD */
125 uint64_t sector_count;
128 /* Calculated from CID */
129 char card_id_string[64];/* Formatted CID info (serial, MFG, etc) */
130 char card_sn_string[16];/* Formatted serial # for disk->d_ident */
131 /* Determined from CSD + is highspeed card*/
134 /* Generic switch timeout */
136 uint32_t timings; /* Mask of bus timings supported */
137 uint32_t vccq_120; /* Mask of bus timings at VCCQ of 1.2 V */
138 uint32_t vccq_180; /* Mask of bus timings at VCCQ of 1.8 V */
139 /* MMC partitions support */
140 struct sdda_part *part[MMC_PART_MAX];
141 uint8_t part_curr; /* Partition currently switched to */
142 uint8_t part_requested; /* What partition we're currently switching to */
143 uint32_t part_time; /* Partition switch timeout [us] */
144 off_t enh_base; /* Enhanced user data area slice base ... */
145 off_t enh_size; /* ... and size [bytes] */
147 struct timeval log_time;
150 static const char *mmc_errmsg[] =
161 #define ccb_bp ppriv_ptr1
163 static disk_strategy_t sddastrategy;
164 static dumper_t sddadump;
165 static periph_init_t sddainit;
166 static void sddaasync(void *callback_arg, uint32_t code,
167 struct cam_path *path, void *arg);
168 static periph_ctor_t sddaregister;
169 static periph_dtor_t sddacleanup;
170 static periph_start_t sddastart;
171 static periph_oninv_t sddaoninvalidate;
172 static void sddadone(struct cam_periph *periph,
173 union ccb *done_ccb);
174 static int sddaerror(union ccb *ccb, uint32_t cam_flags,
175 uint32_t sense_flags);
177 static int mmc_handle_reply(union ccb *ccb);
178 static uint16_t get_rca(struct cam_periph *periph);
179 static void sdda_start_init(void *context, union ccb *start_ccb);
180 static void sdda_start_init_task(void *context, int pending);
181 static void sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *start_ccb);
182 static uint32_t sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb);
183 static int mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca);
184 static inline uint32_t mmc_get_sector_size(struct cam_periph *periph) {return MMC_SECTOR_SIZE;}
186 static SYSCTL_NODE(_kern_cam, OID_AUTO, sdda, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
187 "CAM Direct Access Disk driver");
189 static int sdda_mmcsd_compat = 1;
190 SYSCTL_INT(_kern_cam_sdda, OID_AUTO, mmcsd_compat, CTLFLAG_RDTUN,
191 &sdda_mmcsd_compat, 1, "Enable creation of mmcsd aliases.");
193 /* TODO: actually issue GET_TRAN_SETTINGS to get R/O status */
194 static inline bool sdda_get_read_only(struct cam_periph *periph, union ccb *start_ccb)
200 static uint32_t mmc_get_spec_vers(struct cam_periph *periph);
201 static uint64_t mmc_get_media_size(struct cam_periph *periph);
202 static uint32_t mmc_get_cmd6_timeout(struct cam_periph *periph);
203 static bool sdda_add_part(struct cam_periph *periph, u_int type,
204 const char *name, u_int cnt, off_t media_size, bool ro);
206 static struct periph_driver sddadriver =
209 TAILQ_HEAD_INITIALIZER(sddadriver.units), /* generation */ 0
212 PERIPHDRIVER_DECLARE(sdda, sddadriver);
214 static MALLOC_DEFINE(M_SDDA, "sd_da", "sd_da buffers");
216 static const int exp[8] = {
217 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000
220 static const int mant[16] = {
221 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80
224 static const int cur_min[8] = {
225 500, 1000, 5000, 10000, 25000, 35000, 60000, 100000
228 static const int cur_max[8] = {
229 1000, 5000, 10000, 25000, 35000, 45000, 800000, 200000
233 get_rca(struct cam_periph *periph) {
234 return periph->path->device->mmc_ident_data.card_rca;
238 * Figure out if CCB execution resulted in error.
239 * Look at both CAM-level errors and on MMC protocol errors.
241 * Return value is always MMC error.
244 mmc_handle_reply(union ccb *ccb)
246 KASSERT(ccb->ccb_h.func_code == XPT_MMC_IO,
247 ("ccb %p: cannot handle non-XPT_MMC_IO errors, got func_code=%d",
248 ccb, ccb->ccb_h.func_code));
250 /* CAM-level error should always correspond to MMC-level error */
251 if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) &&
252 (ccb->mmcio.cmd.error != MMC_ERR_NONE))
253 panic("CCB status is OK but MMC error != MMC_ERR_NONE");
255 if (ccb->mmcio.cmd.error != MMC_ERR_NONE) {
256 xpt_print_path(ccb->ccb_h.path);
257 printf("CMD%d failed, err %d (%s)\n",
258 ccb->mmcio.cmd.opcode,
259 ccb->mmcio.cmd.error,
260 mmc_errmsg[ccb->mmcio.cmd.error]);
262 return (ccb->mmcio.cmd.error);
266 mmc_get_bits(uint32_t *bits, int bit_len, int start, int size)
268 const int i = (bit_len / 32) - (start / 32) - 1;
269 const int shift = start & 31;
270 uint32_t retval = bits[i] >> shift;
271 if (size + shift > 32)
272 retval |= bits[i - 1] << (32 - shift);
273 return (retval & ((1llu << size) - 1));
277 mmc_decode_csd_sd(uint32_t *raw_csd, struct mmc_csd *csd)
283 memset(csd, 0, sizeof(*csd));
284 csd->csd_structure = v = mmc_get_bits(raw_csd, 128, 126, 2);
286 /* Common members between 1.0 and 2.0 */
287 m = mmc_get_bits(raw_csd, 128, 115, 4);
288 e = mmc_get_bits(raw_csd, 128, 112, 3);
289 csd->tacc = (exp[e] * mant[m] + 9) / 10;
290 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
291 m = mmc_get_bits(raw_csd, 128, 99, 4);
292 e = mmc_get_bits(raw_csd, 128, 96, 3);
293 csd->tran_speed = exp[e] * 10000 * mant[m];
294 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
295 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
296 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
297 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
298 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
299 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
300 csd->erase_blk_en = mmc_get_bits(raw_csd, 128, 46, 1);
301 csd->erase_sector = mmc_get_bits(raw_csd, 128, 39, 7) + 1;
302 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 7);
303 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
304 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
305 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
306 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
309 csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)];
310 csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)];
311 csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)];
312 csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)];
313 m = mmc_get_bits(raw_csd, 128, 62, 12);
314 e = mmc_get_bits(raw_csd, 128, 47, 3);
315 csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len;
317 csd->capacity = ((uint64_t)mmc_get_bits(raw_csd, 128, 48, 22) + 1) *
320 panic("unknown SD CSD version");
324 mmc_decode_csd_mmc(uint32_t *raw_csd, struct mmc_csd *csd)
329 memset(csd, 0, sizeof(*csd));
330 csd->csd_structure = mmc_get_bits(raw_csd, 128, 126, 2);
331 csd->spec_vers = mmc_get_bits(raw_csd, 128, 122, 4);
332 m = mmc_get_bits(raw_csd, 128, 115, 4);
333 e = mmc_get_bits(raw_csd, 128, 112, 3);
334 csd->tacc = exp[e] * mant[m] + 9 / 10;
335 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
336 m = mmc_get_bits(raw_csd, 128, 99, 4);
337 e = mmc_get_bits(raw_csd, 128, 96, 3);
338 csd->tran_speed = exp[e] * 10000 * mant[m];
339 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
340 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
341 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
342 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
343 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
344 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
345 csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)];
346 csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)];
347 csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)];
348 csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)];
349 m = mmc_get_bits(raw_csd, 128, 62, 12);
350 e = mmc_get_bits(raw_csd, 128, 47, 3);
351 csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len;
352 csd->erase_blk_en = 0;
353 csd->erase_sector = (mmc_get_bits(raw_csd, 128, 42, 5) + 1) *
354 (mmc_get_bits(raw_csd, 128, 37, 5) + 1);
355 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 5);
356 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
357 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
358 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
359 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
363 mmc_decode_cid_sd(uint32_t *raw_cid, struct mmc_cid *cid)
367 /* There's no version info, so we take it on faith */
368 memset(cid, 0, sizeof(*cid));
369 cid->mid = mmc_get_bits(raw_cid, 128, 120, 8);
370 cid->oid = mmc_get_bits(raw_cid, 128, 104, 16);
371 for (i = 0; i < 5; i++)
372 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8);
374 cid->prv = mmc_get_bits(raw_cid, 128, 56, 8);
375 cid->psn = mmc_get_bits(raw_cid, 128, 24, 32);
376 cid->mdt_year = mmc_get_bits(raw_cid, 128, 12, 8) + 2000;
377 cid->mdt_month = mmc_get_bits(raw_cid, 128, 8, 4);
381 mmc_decode_cid_mmc(uint32_t *raw_cid, struct mmc_cid *cid)
385 /* There's no version info, so we take it on faith */
386 memset(cid, 0, sizeof(*cid));
387 cid->mid = mmc_get_bits(raw_cid, 128, 120, 8);
388 cid->oid = mmc_get_bits(raw_cid, 128, 104, 8);
389 for (i = 0; i < 6; i++)
390 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8);
392 cid->prv = mmc_get_bits(raw_cid, 128, 48, 8);
393 cid->psn = mmc_get_bits(raw_cid, 128, 16, 32);
394 cid->mdt_month = mmc_get_bits(raw_cid, 128, 12, 4);
395 cid->mdt_year = mmc_get_bits(raw_cid, 128, 8, 4) + 1997;
399 mmc_format_card_id_string(struct sdda_softc *sc, struct mmc_params *mmcp)
406 * Format a card ID string for use by the mmcsd driver, it's what
407 * appears between the <> in the following:
408 * mmcsd0: 968MB <SD SD01G 8.0 SN 2686905 Mfg 08/2008 by 3 TN> at mmc0
409 * 22.5MHz/4bit/128-block
411 * Also format just the card serial number, which the mmcsd driver will
412 * use as the disk->d_ident string.
414 * The card_id_string in mmc_ivars is currently allocated as 64 bytes,
415 * and our max formatted length is currently 55 bytes if every field
416 * contains the largest value.
418 * Sometimes the oid is two printable ascii chars; when it's not,
419 * format it as 0xnnnn instead.
421 c1 = (sc->cid.oid >> 8) & 0x0ff;
422 c2 = sc->cid.oid & 0x0ff;
423 if (c1 > 0x1f && c1 < 0x7f && c2 > 0x1f && c2 < 0x7f)
424 snprintf(oidstr, sizeof(oidstr), "%c%c", c1, c2);
426 snprintf(oidstr, sizeof(oidstr), "0x%04x", sc->cid.oid);
427 snprintf(sc->card_sn_string, sizeof(sc->card_sn_string),
428 "%08X", sc->cid.psn);
429 snprintf(sc->card_id_string, sizeof(sc->card_id_string),
430 "%s%s %s %d.%d SN %08X MFG %02d/%04d by %d %s",
431 mmcp->card_features & CARD_FEATURE_MMC ? "MMC" : "SD",
432 mmcp->card_features & CARD_FEATURE_SDHC ? "HC" : "",
433 sc->cid.pnm, sc->cid.prv >> 4, sc->cid.prv & 0x0f,
434 sc->cid.psn, sc->cid.mdt_month, sc->cid.mdt_year,
435 sc->cid.mid, oidstr);
439 sddaopen(struct disk *dp)
441 struct sdda_part *part;
442 struct cam_periph *periph;
443 struct sdda_softc *softc;
446 part = (struct sdda_part *)dp->d_drv1;
448 periph = softc->periph;
449 if (cam_periph_acquire(periph) != 0) {
453 cam_periph_lock(periph);
454 if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) {
455 cam_periph_unlock(periph);
456 cam_periph_release(periph);
460 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaopen\n"));
462 part->flags |= SDDA_FLAG_OPEN;
464 cam_periph_unhold(periph);
465 cam_periph_unlock(periph);
470 sddaclose(struct disk *dp)
472 struct sdda_part *part;
473 struct cam_periph *periph;
474 struct sdda_softc *softc;
476 part = (struct sdda_part *)dp->d_drv1;
478 periph = softc->periph;
479 part->flags &= ~SDDA_FLAG_OPEN;
481 cam_periph_lock(periph);
483 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaclose\n"));
485 while (softc->refcount != 0)
486 cam_periph_sleep(periph, &softc->refcount, PRIBIO, "sddaclose", 1);
487 cam_periph_unlock(periph);
488 cam_periph_release(periph);
493 sddaschedule(struct cam_periph *periph)
495 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
496 struct sdda_part *part;
500 /* Check if we have more work to do. */
501 /* Find partition that has outstanding commands. Prefer current partition. */
502 bp = bioq_first(&softc->part[softc->part_curr]->bio_queue);
504 for (i = 0; i < MMC_PART_MAX; i++) {
505 if ((part = softc->part[i]) != NULL &&
506 (bp = bioq_first(&softc->part[i]->bio_queue)) != NULL)
511 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
516 * Actually translate the requested transfer into one the physical driver
517 * can understand. The transfer is described by a buf and will include
518 * only one physical transfer.
521 sddastrategy(struct bio *bp)
523 struct cam_periph *periph;
524 struct sdda_part *part;
525 struct sdda_softc *softc;
527 part = (struct sdda_part *)bp->bio_disk->d_drv1;
529 periph = softc->periph;
531 cam_periph_lock(periph);
533 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastrategy(%p)\n", bp));
536 * If the device has been made invalid, error out
538 if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
539 cam_periph_unlock(periph);
540 biofinish(bp, NULL, ENXIO);
545 * Place it in the queue of disk activities for this disk
547 bioq_disksort(&part->bio_queue, bp);
550 * Schedule ourselves for performing the work.
552 sddaschedule(periph);
553 cam_periph_unlock(periph);
564 * Install a global async callback. This callback will
565 * receive async callbacks like "new device found".
567 status = xpt_register_async(AC_FOUND_DEVICE, sddaasync, NULL, NULL);
569 if (status != CAM_REQ_CMP) {
570 printf("sdda: Failed to attach master async callback "
571 "due to status 0x%x!\n", status);
576 * Callback from GEOM, called when it has finished cleaning up its
580 sddadiskgonecb(struct disk *dp)
582 struct cam_periph *periph;
583 struct sdda_part *part;
585 part = (struct sdda_part *)dp->d_drv1;
586 periph = part->sc->periph;
587 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddadiskgonecb\n"));
589 cam_periph_release(periph);
593 sddaoninvalidate(struct cam_periph *periph)
595 struct sdda_softc *softc;
596 struct sdda_part *part;
598 softc = (struct sdda_softc *)periph->softc;
600 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaoninvalidate\n"));
603 * De-register any async callbacks.
605 xpt_register_async(0, sddaasync, periph, periph->path);
608 * Return all queued I/O with ENXIO.
609 * XXX Handle any transactions queued to the card
610 * with XPT_ABORT_CCB.
612 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush start\n"));
613 for (int i = 0; i < MMC_PART_MAX; i++) {
614 if ((part = softc->part[i]) != NULL) {
615 bioq_flush(&part->bio_queue, NULL, ENXIO);
616 disk_gone(part->disk);
619 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush end\n"));
623 sddacleanup(struct cam_periph *periph)
625 struct sdda_softc *softc;
626 struct sdda_part *part;
629 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddacleanup\n"));
630 softc = (struct sdda_softc *)periph->softc;
632 cam_periph_unlock(periph);
634 for (i = 0; i < MMC_PART_MAX; i++) {
635 if ((part = softc->part[i]) != NULL) {
636 disk_destroy(part->disk);
637 free(part, M_DEVBUF);
638 softc->part[i] = NULL;
641 free(softc, M_DEVBUF);
642 cam_periph_lock(periph);
646 sddaasync(void *callback_arg, uint32_t code,
647 struct cam_path *path, void *arg)
649 struct ccb_getdev cgd;
650 struct cam_periph *periph;
652 periph = (struct cam_periph *)callback_arg;
653 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddaasync(code=%d)\n", code));
655 case AC_FOUND_DEVICE:
657 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_FOUND_DEVICE\n"));
658 struct ccb_getdev *cgd;
661 cgd = (struct ccb_getdev *)arg;
665 if (cgd->protocol != PROTO_MMCSD)
668 if (!(path->device->mmc_ident_data.card_features & CARD_FEATURE_MEMORY)) {
669 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("No memory on the card!\n"));
674 * Allocate a peripheral instance for
675 * this device and start the probe
678 status = cam_periph_alloc(sddaregister, sddaoninvalidate,
679 sddacleanup, sddastart,
680 "sdda", CAM_PERIPH_BIO,
682 AC_FOUND_DEVICE, cgd);
684 if (status != CAM_REQ_CMP
685 && status != CAM_REQ_INPROG)
686 printf("sddaasync: Unable to attach to new device "
687 "due to status 0x%x\n", status);
690 case AC_GETDEV_CHANGED:
692 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_GETDEV_CHANGED\n"));
693 memset(&cgd, 0, sizeof(cgd));
694 xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
695 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
696 xpt_action((union ccb *)&cgd);
697 cam_periph_async(periph, code, path, arg);
700 case AC_ADVINFO_CHANGED:
705 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_ADVINFO_CHANGED\n"));
706 buftype = (uintptr_t)arg;
707 if (buftype == CDAI_TYPE_PHYS_PATH) {
708 struct sdda_softc *softc;
709 struct sdda_part *part;
711 softc = periph->softc;
712 for (i = 0; i < MMC_PART_MAX; i++) {
713 if ((part = softc->part[i]) != NULL) {
714 disk_attr_changed(part->disk, "GEOM::physpath",
722 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> default?!\n"));
723 cam_periph_async(periph, code, path, arg);
729 sddagetattr(struct bio *bp)
731 struct cam_periph *periph;
732 struct sdda_softc *softc;
733 struct sdda_part *part;
736 part = (struct sdda_part *)bp->bio_disk->d_drv1;
738 periph = softc->periph;
739 cam_periph_lock(periph);
740 ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute,
742 cam_periph_unlock(periph);
744 bp->bio_completed = bp->bio_length;
749 sddaregister(struct cam_periph *periph, void *arg)
751 struct sdda_softc *softc;
752 struct ccb_getdev *cgd;
754 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaregister\n"));
755 cgd = (struct ccb_getdev *)arg;
757 printf("sddaregister: no getdev CCB, can't register device\n");
758 return (CAM_REQ_CMP_ERR);
761 softc = (struct sdda_softc *)malloc(sizeof(*softc), M_DEVBUF,
764 printf("sddaregister: Unable to probe new device. "
765 "Unable to allocate softc\n");
766 return (CAM_REQ_CMP_ERR);
769 softc->state = SDDA_STATE_INIT;
771 (struct mmc_data *)malloc(sizeof(struct mmc_data), M_DEVBUF, M_NOWAIT|M_ZERO);
772 if (softc->mmcdata == NULL) {
773 printf("sddaregister: Unable to probe new device. "
774 "Unable to allocate mmcdata\n");
775 free(softc, M_DEVBUF);
776 return (CAM_REQ_CMP_ERR);
778 periph->softc = softc;
779 softc->periph = periph;
781 xpt_schedule(periph, CAM_PRIORITY_XPT);
782 TASK_INIT(&softc->start_init_task, 0, sdda_start_init_task, periph);
783 taskqueue_enqueue(taskqueue_thread, &softc->start_init_task);
785 return (CAM_REQ_CMP);
789 mmc_exec_app_cmd(struct cam_periph *periph, union ccb *ccb,
790 struct mmc_command *cmd) {
793 /* Send APP_CMD first */
794 memset(&ccb->mmcio.cmd, 0, sizeof(struct mmc_command));
795 memset(&ccb->mmcio.stop, 0, sizeof(struct mmc_command));
796 cam_fill_mmcio(&ccb->mmcio,
799 /*flags*/ CAM_DIR_NONE,
800 /*mmc_opcode*/ MMC_APP_CMD,
801 /*mmc_arg*/ get_rca(periph) << 16,
802 /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_AC,
806 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
807 err = mmc_handle_reply(ccb);
810 if (!(ccb->mmcio.cmd.resp[0] & R1_APP_CMD))
813 /* Now exec actual command */
815 if (cmd->data != NULL) {
816 ccb->mmcio.cmd.data = cmd->data;
817 if (cmd->data->flags & MMC_DATA_READ)
819 if (cmd->data->flags & MMC_DATA_WRITE)
820 flags |= CAM_DIR_OUT;
821 } else flags = CAM_DIR_NONE;
823 cam_fill_mmcio(&ccb->mmcio,
827 /*mmc_opcode*/ cmd->opcode,
828 /*mmc_arg*/ cmd->arg,
829 /*mmc_flags*/ cmd->flags,
830 /*mmc_data*/ cmd->data,
833 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
834 err = mmc_handle_reply(ccb);
837 memcpy(cmd->resp, ccb->mmcio.cmd.resp, sizeof(cmd->resp));
838 cmd->error = ccb->mmcio.cmd.error;
844 mmc_app_get_scr(struct cam_periph *periph, union ccb *ccb, uint32_t *rawscr) {
846 struct mmc_command cmd;
849 memset(&cmd, 0, sizeof(cmd));
850 memset(&d, 0, sizeof(d));
852 memset(rawscr, 0, 8);
853 cmd.opcode = ACMD_SEND_SCR;
854 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
859 d.flags = MMC_DATA_READ;
862 err = mmc_exec_app_cmd(periph, ccb, &cmd);
863 rawscr[0] = be32toh(rawscr[0]);
864 rawscr[1] = be32toh(rawscr[1]);
869 mmc_send_ext_csd(struct cam_periph *periph, union ccb *ccb,
870 uint8_t *rawextcsd, size_t buf_len) {
874 KASSERT(buf_len == 512, ("Buffer for ext csd must be 512 bytes"));
875 memset(&d, 0, sizeof(d));
878 d.flags = MMC_DATA_READ;
879 memset(d.data, 0, d.len);
881 cam_fill_mmcio(&ccb->mmcio,
884 /*flags*/ CAM_DIR_IN,
885 /*mmc_opcode*/ MMC_SEND_EXT_CSD,
887 /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC,
891 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
892 err = mmc_handle_reply(ccb);
897 mmc_app_decode_scr(uint32_t *raw_scr, struct mmc_scr *scr)
899 unsigned int scr_struct;
901 memset(scr, 0, sizeof(*scr));
903 scr_struct = mmc_get_bits(raw_scr, 64, 60, 4);
904 if (scr_struct != 0) {
905 printf("Unrecognised SCR structure version %d\n",
909 scr->sda_vsn = mmc_get_bits(raw_scr, 64, 56, 4);
910 scr->bus_widths = mmc_get_bits(raw_scr, 64, 48, 4);
914 mmc_switch_fill_mmcio(union ccb *ccb,
915 uint8_t set, uint8_t index, uint8_t value, u_int timeout)
917 int arg = (MMC_SWITCH_FUNC_WR << 24) |
922 cam_fill_mmcio(&ccb->mmcio,
925 /*flags*/ CAM_DIR_NONE,
926 /*mmc_opcode*/ MMC_SWITCH_FUNC,
928 /*mmc_flags*/ MMC_RSP_R1B | MMC_CMD_AC,
930 /*timeout*/ timeout);
934 mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca)
938 flags = (rca ? MMC_RSP_R1B : MMC_RSP_NONE) | MMC_CMD_AC;
939 cam_fill_mmcio(&ccb->mmcio,
942 /*flags*/ CAM_DIR_IN,
943 /*mmc_opcode*/ MMC_SELECT_CARD,
944 /*mmc_arg*/ rca << 16,
949 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
950 err = mmc_handle_reply(ccb);
955 mmc_switch(struct cam_periph *periph, union ccb *ccb,
956 uint8_t set, uint8_t index, uint8_t value, u_int timeout)
960 mmc_switch_fill_mmcio(ccb, set, index, value, timeout);
961 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
962 err = mmc_handle_reply(ccb);
967 mmc_get_spec_vers(struct cam_periph *periph) {
968 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
970 return (softc->csd.spec_vers);
974 mmc_get_media_size(struct cam_periph *periph) {
975 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
977 return (softc->mediasize);
981 mmc_get_cmd6_timeout(struct cam_periph *periph)
983 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
985 if (mmc_get_spec_vers(periph) >= 6)
986 return (softc->raw_ext_csd[EXT_CSD_GEN_CMD6_TIME] * 10);
991 mmc_sd_switch(struct cam_periph *periph, union ccb *ccb,
992 uint8_t mode, uint8_t grp, uint8_t value,
994 struct mmc_data mmc_d;
999 memset(&mmc_d, 0, sizeof(mmc_d));
1002 mmc_d.flags = MMC_DATA_READ;
1004 arg = mode << 31; /* 0 - check, 1 - set */
1006 arg &= ~(0xF << (grp * 4));
1007 arg |= value << (grp * 4);
1009 cam_fill_mmcio(&ccb->mmcio,
1012 /*flags*/ CAM_DIR_IN,
1013 /*mmc_opcode*/ SD_SWITCH_FUNC,
1015 /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC,
1016 /*mmc_data*/ &mmc_d,
1019 cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
1020 err = mmc_handle_reply(ccb);
1025 mmc_set_timing(struct cam_periph *periph,
1027 enum mmc_bus_timing timing)
1029 u_char switch_res[64];
1032 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1033 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1035 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
1036 ("mmc_set_timing(timing=%d)", timing));
1038 case bus_timing_normal:
1045 return (MMC_ERR_INVALID);
1047 if (mmcp->card_features & CARD_FEATURE_MMC) {
1048 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL,
1049 EXT_CSD_HS_TIMING, value, softc->cmd6_time);
1051 err = mmc_sd_switch(periph, ccb, SD_SWITCH_MODE_SET, SD_SWITCH_GROUP1, value, switch_res);
1054 /* Set high-speed timing on the host */
1055 struct ccb_trans_settings_mmc *cts;
1056 cts = &ccb->cts.proto_specific.mmc;
1057 ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1058 ccb->ccb_h.flags = CAM_DIR_NONE;
1059 ccb->ccb_h.retry_count = 0;
1060 ccb->ccb_h.timeout = 100;
1061 ccb->ccb_h.cbfcnp = NULL;
1062 cts->ios.timing = timing;
1063 cts->ios_valid = MMC_BT;
1070 sdda_start_init_task(void *context, int pending) {
1072 struct cam_periph *periph;
1074 periph = (struct cam_periph *)context;
1075 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init_task\n"));
1076 new_ccb = xpt_alloc_ccb();
1077 xpt_setup_ccb(&new_ccb->ccb_h, periph->path,
1080 cam_periph_lock(periph);
1081 cam_periph_hold(periph, PRIBIO|PCATCH);
1082 sdda_start_init(context, new_ccb);
1083 cam_periph_unhold(periph);
1084 cam_periph_unlock(periph);
1085 xpt_free_ccb(new_ccb);
1089 sdda_set_bus_width(struct cam_periph *periph, union ccb *ccb, int width) {
1090 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1091 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1094 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_set_bus_width\n"));
1096 /* First set for the card, then for the host */
1097 if (mmcp->card_features & CARD_FEATURE_MMC) {
1101 value = EXT_CSD_BUS_WIDTH_1;
1104 value = EXT_CSD_BUS_WIDTH_4;
1107 value = EXT_CSD_BUS_WIDTH_8;
1110 panic("Invalid bus width %d", width);
1112 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL,
1113 EXT_CSD_BUS_WIDTH, value, softc->cmd6_time);
1115 /* For SD cards we send ACMD6 with the required bus width in arg */
1116 struct mmc_command cmd;
1117 memset(&cmd, 0, sizeof(struct mmc_command));
1118 cmd.opcode = ACMD_SET_BUS_WIDTH;
1120 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
1121 err = mmc_exec_app_cmd(periph, ccb, &cmd);
1124 if (err != MMC_ERR_NONE) {
1125 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Error %d when setting bus width on the card\n", err));
1128 /* Now card is done, set the host to the same width */
1129 struct ccb_trans_settings_mmc *cts;
1130 cts = &ccb->cts.proto_specific.mmc;
1131 ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1132 ccb->ccb_h.flags = CAM_DIR_NONE;
1133 ccb->ccb_h.retry_count = 0;
1134 ccb->ccb_h.timeout = 100;
1135 ccb->ccb_h.cbfcnp = NULL;
1136 cts->ios.bus_width = width;
1137 cts->ios_valid = MMC_BW;
1141 static inline const char
1142 *part_type(u_int type)
1146 case EXT_CSD_PART_CONFIG_ACC_RPMB:
1148 case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
1150 case EXT_CSD_PART_CONFIG_ACC_BOOT0:
1152 case EXT_CSD_PART_CONFIG_ACC_BOOT1:
1154 case EXT_CSD_PART_CONFIG_ACC_GP0:
1155 case EXT_CSD_PART_CONFIG_ACC_GP1:
1156 case EXT_CSD_PART_CONFIG_ACC_GP2:
1157 case EXT_CSD_PART_CONFIG_ACC_GP3:
1158 return ("general purpose");
1160 return ("(unknown type)");
1164 static inline const char
1165 *bus_width_str(enum mmc_bus_width w)
1176 __assert_unreachable();
1181 sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb)
1183 struct ccb_trans_settings_mmc *cts;
1185 cts = &ccb->cts.proto_specific.mmc;
1187 ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1188 ccb->ccb_h.flags = CAM_DIR_NONE;
1189 ccb->ccb_h.retry_count = 0;
1190 ccb->ccb_h.timeout = 100;
1191 ccb->ccb_h.cbfcnp = NULL;
1194 if (ccb->ccb_h.status != CAM_REQ_CMP)
1195 panic("Cannot get host caps");
1196 return (cts->host_caps);
1200 sdda_get_max_data(struct cam_periph *periph, union ccb *ccb)
1202 struct ccb_trans_settings_mmc *cts;
1204 cts = &ccb->cts.proto_specific.mmc;
1205 memset(cts, 0, sizeof(struct ccb_trans_settings_mmc));
1207 ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1208 ccb->ccb_h.flags = CAM_DIR_NONE;
1209 ccb->ccb_h.retry_count = 0;
1210 ccb->ccb_h.timeout = 100;
1211 ccb->ccb_h.cbfcnp = NULL;
1214 if (ccb->ccb_h.status != CAM_REQ_CMP)
1215 panic("Cannot get host max data");
1216 KASSERT(cts->host_max_data != 0, ("host_max_data == 0?!"));
1217 return (cts->host_max_data);
1221 sdda_start_init(void *context, union ccb *start_ccb)
1223 struct cam_periph *periph = (struct cam_periph *)context;
1224 struct ccb_trans_settings_mmc *cts;
1231 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init\n"));
1232 /* periph was held for us when this task was enqueued */
1233 if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
1234 cam_periph_release(periph);
1238 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1239 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1240 struct cam_ed *device = periph->path->device;
1242 if (mmcp->card_features & CARD_FEATURE_MMC) {
1243 mmc_decode_csd_mmc(mmcp->card_csd, &softc->csd);
1244 mmc_decode_cid_mmc(mmcp->card_cid, &softc->cid);
1245 if (mmc_get_spec_vers(periph) >= 4) {
1246 err = mmc_send_ext_csd(periph, start_ccb,
1247 (uint8_t *)&softc->raw_ext_csd,
1248 sizeof(softc->raw_ext_csd));
1250 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1251 ("Cannot read EXT_CSD, err %d", err));
1256 mmc_decode_csd_sd(mmcp->card_csd, &softc->csd);
1257 mmc_decode_cid_sd(mmcp->card_cid, &softc->cid);
1260 softc->sector_count = softc->csd.capacity / MMC_SECTOR_SIZE;
1261 softc->mediasize = softc->csd.capacity;
1262 softc->cmd6_time = mmc_get_cmd6_timeout(periph);
1264 /* MMC >= 4.x have EXT_CSD that has its own opinion about capacity */
1265 if (mmc_get_spec_vers(periph) >= 4) {
1266 sec_count = softc->raw_ext_csd[EXT_CSD_SEC_CNT] +
1267 (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 1] << 8) +
1268 (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 2] << 16) +
1269 (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
1270 if (sec_count != 0) {
1271 softc->sector_count = sec_count;
1272 softc->mediasize = softc->sector_count * MMC_SECTOR_SIZE;
1273 /* FIXME: there should be a better name for this option...*/
1274 mmcp->card_features |= CARD_FEATURE_SDHC;
1277 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1278 ("Capacity: %"PRIu64", sectors: %"PRIu64"\n",
1280 softc->sector_count));
1281 mmc_format_card_id_string(softc, mmcp);
1283 /* Update info for CAM */
1284 device->serial_num_len = strlen(softc->card_sn_string);
1285 device->serial_num = (uint8_t *)malloc((device->serial_num_len + 1),
1286 M_CAMXPT, M_NOWAIT);
1287 strlcpy(device->serial_num, softc->card_sn_string, device->serial_num_len + 1);
1289 device->device_id_len = strlen(softc->card_id_string);
1290 device->device_id = (uint8_t *)malloc((device->device_id_len + 1),
1291 M_CAMXPT, M_NOWAIT);
1292 strlcpy(device->device_id, softc->card_id_string, device->device_id_len + 1);
1294 strlcpy(mmcp->model, softc->card_id_string, sizeof(mmcp->model));
1296 /* Set the clock frequency that the card can handle */
1297 cts = &start_ccb->cts.proto_specific.mmc;
1299 /* First, get the host's max freq */
1300 start_ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1301 start_ccb->ccb_h.flags = CAM_DIR_NONE;
1302 start_ccb->ccb_h.retry_count = 0;
1303 start_ccb->ccb_h.timeout = 100;
1304 start_ccb->ccb_h.cbfcnp = NULL;
1305 xpt_action(start_ccb);
1307 if (start_ccb->ccb_h.status != CAM_REQ_CMP)
1308 panic("Cannot get max host freq");
1309 host_f_max = cts->host_f_max;
1310 host_caps = cts->host_caps;
1311 if (cts->ios.bus_width != bus_width_1)
1312 panic("Bus width in ios is not 1-bit");
1314 /* Now check if the card supports High-speed */
1315 softc->card_f_max = softc->csd.tran_speed;
1317 if (host_caps & MMC_CAP_HSPEED) {
1318 /* Find out if the card supports High speed timing */
1319 if (mmcp->card_features & CARD_FEATURE_SD20) {
1320 /* Get and decode SCR */
1323 if (mmc_app_get_scr(periph, start_ccb, rawscr)) {
1324 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Cannot get SCR\n"));
1325 goto finish_hs_tests;
1327 mmc_app_decode_scr(rawscr, &softc->scr);
1329 if ((softc->scr.sda_vsn >= 1) && (softc->csd.ccc & (1<<10))) {
1330 mmc_sd_switch(periph, start_ccb, SD_SWITCH_MODE_CHECK,
1331 SD_SWITCH_GROUP1, SD_SWITCH_NOCHANGE, res);
1333 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS\n"));
1334 softc->card_f_max = SD_HS_MAX;
1338 * We deselect then reselect the card here. Some cards
1339 * become unselected and timeout with the above two
1340 * commands, although the state tables / diagrams in the
1341 * standard suggest they go back to the transfer state.
1342 * Other cards don't become deselected, and if we
1343 * attempt to blindly re-select them, we get timeout
1344 * errors from some controllers. So we deselect then
1345 * reselect to handle all situations.
1347 mmc_select_card(periph, start_ccb, 0);
1348 mmc_select_card(periph, start_ccb, get_rca(periph));
1350 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Not trying the switch\n"));
1351 goto finish_hs_tests;
1355 if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) {
1356 card_type = softc->raw_ext_csd[EXT_CSD_CARD_TYPE];
1357 if (card_type & EXT_CSD_CARD_TYPE_HS_52)
1358 softc->card_f_max = MMC_TYPE_HS_52_MAX;
1359 else if (card_type & EXT_CSD_CARD_TYPE_HS_26)
1360 softc->card_f_max = MMC_TYPE_HS_26_MAX;
1361 if ((card_type & EXT_CSD_CARD_TYPE_DDR_52_1_2V) != 0 &&
1362 (host_caps & MMC_CAP_SIGNALING_120) != 0) {
1363 setbit(&softc->timings, bus_timing_mmc_ddr52);
1364 setbit(&softc->vccq_120, bus_timing_mmc_ddr52);
1365 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports DDR52 at 1.2V\n"));
1367 if ((card_type & EXT_CSD_CARD_TYPE_DDR_52_1_8V) != 0 &&
1368 (host_caps & MMC_CAP_SIGNALING_180) != 0) {
1369 setbit(&softc->timings, bus_timing_mmc_ddr52);
1370 setbit(&softc->vccq_180, bus_timing_mmc_ddr52);
1371 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports DDR52 at 1.8V\n"));
1373 if ((card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) != 0 &&
1374 (host_caps & MMC_CAP_SIGNALING_120) != 0) {
1375 setbit(&softc->timings, bus_timing_mmc_hs200);
1376 setbit(&softc->vccq_120, bus_timing_mmc_hs200);
1377 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS200 at 1.2V\n"));
1379 if ((card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) != 0 &&
1380 (host_caps & MMC_CAP_SIGNALING_180) != 0) {
1381 setbit(&softc->timings, bus_timing_mmc_hs200);
1382 setbit(&softc->vccq_180, bus_timing_mmc_hs200);
1383 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS200 at 1.8V\n"));
1389 f_max = min(host_f_max, softc->card_f_max);
1390 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Set SD freq to %d MHz (min out of host f=%d MHz and card f=%d MHz)\n", f_max / 1000000, host_f_max / 1000000, softc->card_f_max / 1000000));
1392 /* Enable high-speed timing on the card */
1393 if (f_max > 25000000) {
1394 err = mmc_set_timing(periph, start_ccb, bus_timing_hs);
1395 if (err != MMC_ERR_NONE) {
1396 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("Cannot switch card to high-speed mode"));
1400 /* If possible, set lower-level signaling */
1401 enum mmc_bus_timing timing;
1402 /* FIXME: MMCCAM supports max. bus_timing_mmc_ddr52 at the moment. */
1403 for (timing = bus_timing_mmc_ddr52; timing > bus_timing_normal; timing--) {
1404 if (isset(&softc->vccq_120, timing)) {
1405 /* Set VCCQ = 1.2V */
1406 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1407 start_ccb->ccb_h.flags = CAM_DIR_NONE;
1408 start_ccb->ccb_h.retry_count = 0;
1409 start_ccb->ccb_h.timeout = 100;
1410 start_ccb->ccb_h.cbfcnp = NULL;
1411 cts->ios.vccq = vccq_120;
1412 cts->ios_valid = MMC_VCCQ;
1413 xpt_action(start_ccb);
1415 } else if (isset(&softc->vccq_180, timing)) {
1416 /* Set VCCQ = 1.8V */
1417 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1418 start_ccb->ccb_h.flags = CAM_DIR_NONE;
1419 start_ccb->ccb_h.retry_count = 0;
1420 start_ccb->ccb_h.timeout = 100;
1421 start_ccb->ccb_h.cbfcnp = NULL;
1422 cts->ios.vccq = vccq_180;
1423 cts->ios_valid = MMC_VCCQ;
1424 xpt_action(start_ccb);
1427 /* Set VCCQ = 3.3V */
1428 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1429 start_ccb->ccb_h.flags = CAM_DIR_NONE;
1430 start_ccb->ccb_h.retry_count = 0;
1431 start_ccb->ccb_h.timeout = 100;
1432 start_ccb->ccb_h.cbfcnp = NULL;
1433 cts->ios.vccq = vccq_330;
1434 cts->ios_valid = MMC_VCCQ;
1435 xpt_action(start_ccb);
1440 /* Set frequency on the controller */
1441 start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1442 start_ccb->ccb_h.flags = CAM_DIR_NONE;
1443 start_ccb->ccb_h.retry_count = 0;
1444 start_ccb->ccb_h.timeout = 100;
1445 start_ccb->ccb_h.cbfcnp = NULL;
1446 cts->ios.clock = f_max;
1447 cts->ios_valid = MMC_CLK;
1448 xpt_action(start_ccb);
1451 enum mmc_bus_width desired_bus_width = bus_width_1;
1452 enum mmc_bus_width max_host_bus_width =
1453 (host_caps & MMC_CAP_8_BIT_DATA ? bus_width_8 :
1454 host_caps & MMC_CAP_4_BIT_DATA ? bus_width_4 : bus_width_1);
1455 enum mmc_bus_width max_card_bus_width = bus_width_1;
1456 if (mmcp->card_features & CARD_FEATURE_SD20 &&
1457 softc->scr.bus_widths & SD_SCR_BUS_WIDTH_4)
1458 max_card_bus_width = bus_width_4;
1460 * Unlike SD, MMC cards don't have any information about supported bus width...
1461 * So we need to perform read/write test to find out the width.
1463 /* TODO: figure out bus width for MMC; use 8-bit for now (to test on BBB) */
1464 if (mmcp->card_features & CARD_FEATURE_MMC)
1465 max_card_bus_width = bus_width_8;
1467 desired_bus_width = min(max_host_bus_width, max_card_bus_width);
1468 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1469 ("Set bus width to %s (min of host %s and card %s)\n",
1470 bus_width_str(desired_bus_width),
1471 bus_width_str(max_host_bus_width),
1472 bus_width_str(max_card_bus_width)));
1473 sdda_set_bus_width(periph, start_ccb, desired_bus_width);
1475 softc->state = SDDA_STATE_NORMAL;
1477 cam_periph_unhold(periph);
1478 /* MMC partitions support */
1479 if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) {
1480 sdda_process_mmc_partitions(periph, start_ccb);
1481 } else if (mmcp->card_features & CARD_FEATURE_MEMORY) {
1482 /* For SD[HC] cards, just add one partition that is the whole card */
1483 if (sdda_add_part(periph, 0, "sdda",
1484 periph->unit_number,
1485 mmc_get_media_size(periph),
1486 sdda_get_read_only(periph, start_ccb)) == false)
1488 softc->part_curr = 0;
1490 cam_periph_hold(periph, PRIBIO|PCATCH);
1492 xpt_announce_periph(periph, softc->card_id_string);
1494 * Add async callbacks for bus reset and bus device reset calls.
1495 * I don't bother checking if this fails as, in most cases,
1496 * the system will function just fine without them and the only
1497 * alternative would be to not attach the device on failure.
1499 xpt_register_async(AC_LOST_DEVICE | AC_GETDEV_CHANGED |
1500 AC_ADVINFO_CHANGED, sddaasync, periph, periph->path);
1504 sdda_add_part(struct cam_periph *periph, u_int type, const char *name,
1505 u_int cnt, off_t media_size, bool ro)
1507 struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1508 struct sdda_part *part;
1509 struct ccb_pathinq cpi;
1511 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1512 ("Partition type '%s', size %ju %s\n",
1515 ro ? "(read-only)" : ""));
1517 part = sc->part[type] = malloc(sizeof(*part), M_DEVBUF,
1520 printf("Cannot add partition for sdda\n");
1528 snprintf(part->name, sizeof(part->name), name, periph->unit_number);
1531 * Due to the nature of RPMB partition it doesn't make much sense
1532 * to add it as a disk. It would be more appropriate to create a
1533 * userland tool to operate on the partition or leverage the existing
1534 * tools from sysutils/mmc-utils.
1536 if (type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
1537 /* TODO: Create device, assign IOCTL handler */
1538 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1539 ("Don't know what to do with RPMB partitions yet\n"));
1543 bioq_init(&part->bio_queue);
1545 bzero(&cpi, sizeof(cpi));
1546 xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NONE);
1547 cpi.ccb_h.func_code = XPT_PATH_INQ;
1548 xpt_action((union ccb *)&cpi);
1551 * Register this media as a disk
1553 (void)cam_periph_hold(periph, PRIBIO);
1554 cam_periph_unlock(periph);
1556 part->disk = disk_alloc();
1557 part->disk->d_rotation_rate = DISK_RR_NON_ROTATING;
1558 part->disk->d_devstat = devstat_new_entry(part->name,
1559 cnt, MMC_SECTOR_SIZE,
1560 DEVSTAT_ALL_SUPPORTED,
1561 DEVSTAT_TYPE_DIRECT | XPORT_DEVSTAT_TYPE(cpi.transport),
1562 DEVSTAT_PRIORITY_DISK);
1564 part->disk->d_open = sddaopen;
1565 part->disk->d_close = sddaclose;
1566 part->disk->d_strategy = sddastrategy;
1567 if (cam_sim_pollable(periph->sim))
1568 part->disk->d_dump = sddadump;
1569 part->disk->d_getattr = sddagetattr;
1570 part->disk->d_gone = sddadiskgonecb;
1571 part->disk->d_name = part->name;
1572 part->disk->d_drv1 = part;
1573 part->disk->d_maxsize =
1574 MIN(maxphys, sdda_get_max_data(periph,
1575 (union ccb *)&cpi) * mmc_get_sector_size(periph));
1576 part->disk->d_unit = cnt;
1577 part->disk->d_flags = 0;
1578 strlcpy(part->disk->d_descr, sc->card_id_string,
1579 MIN(sizeof(part->disk->d_descr), sizeof(sc->card_id_string)));
1580 strlcpy(part->disk->d_ident, sc->card_sn_string,
1581 MIN(sizeof(part->disk->d_ident), sizeof(sc->card_sn_string)));
1582 part->disk->d_hba_vendor = cpi.hba_vendor;
1583 part->disk->d_hba_device = cpi.hba_device;
1584 part->disk->d_hba_subvendor = cpi.hba_subvendor;
1585 part->disk->d_hba_subdevice = cpi.hba_subdevice;
1586 snprintf(part->disk->d_attachment, sizeof(part->disk->d_attachment),
1587 "%s%d", cpi.dev_name, cpi.unit_number);
1589 part->disk->d_sectorsize = mmc_get_sector_size(periph);
1590 part->disk->d_mediasize = media_size;
1591 part->disk->d_stripesize = 0;
1592 part->disk->d_fwsectors = 0;
1593 part->disk->d_fwheads = 0;
1595 if (sdda_mmcsd_compat)
1596 disk_add_alias(part->disk, "mmcsd");
1599 * Acquire a reference to the periph before we register with GEOM.
1600 * We'll release this reference once GEOM calls us back (via
1601 * sddadiskgonecb()) telling us that our provider has been freed.
1603 if (cam_periph_acquire(periph) != 0) {
1604 xpt_print(periph->path, "%s: lost periph during "
1605 "registration!\n", __func__);
1606 cam_periph_lock(periph);
1609 disk_create(part->disk, DISK_VERSION);
1610 cam_periph_lock(periph);
1611 cam_periph_unhold(periph);
1617 * For MMC cards, process EXT_CSD and add partitions that are supported by
1621 sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *ccb)
1623 struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1624 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1625 off_t erase_size, sector_size, size, wp_size;
1627 const uint8_t *ext_csd;
1631 ext_csd = sc->raw_ext_csd;
1634 * Enhanced user data area and general purpose partitions are only
1635 * supported in revision 1.4 (EXT_CSD_REV == 4) and later, the RPMB
1636 * partition in revision 1.5 (MMC v4.41, EXT_CSD_REV == 5) and later.
1638 rev = ext_csd[EXT_CSD_REV];
1641 * Ignore user-creatable enhanced user data area and general purpose
1642 * partitions partitions as long as partitioning hasn't been finished.
1644 comp = (ext_csd[EXT_CSD_PART_SET] & EXT_CSD_PART_SET_COMPLETED) != 0;
1647 * Add enhanced user data area slice, unless it spans the entirety of
1648 * the user data area. The enhanced area is of a multiple of high
1649 * capacity write protect groups ((ERASE_GRP_SIZE + HC_WP_GRP_SIZE) *
1650 * 512 KB) and its offset given in either sectors or bytes, depending
1651 * on whether it's a high capacity device or not.
1652 * NB: The slicer and its slices need to be registered before adding
1653 * the disk for the corresponding user data area as re-tasting is
1656 sector_size = mmc_get_sector_size(periph);
1657 size = ext_csd[EXT_CSD_ENH_SIZE_MULT] +
1658 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
1659 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16);
1660 if (rev >= 4 && comp == TRUE && size > 0 &&
1661 (ext_csd[EXT_CSD_PART_SUPPORT] &
1662 EXT_CSD_PART_SUPPORT_ENH_ATTR_EN) != 0 &&
1663 (ext_csd[EXT_CSD_PART_ATTR] & (EXT_CSD_PART_ATTR_ENH_USR)) != 0) {
1664 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
1666 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1667 size *= erase_size * wp_size;
1668 if (size != mmc_get_media_size(periph) * sector_size) {
1669 sc->enh_size = size;
1670 sc->enh_base = (ext_csd[EXT_CSD_ENH_START_ADDR] +
1671 (ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
1672 (ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
1673 (ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24)) *
1674 ((mmcp->card_features & CARD_FEATURE_SDHC) ? 1: MMC_SECTOR_SIZE);
1676 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1677 ("enhanced user data area spans entire device"));
1681 * Add default partition. This may be the only one or the user
1682 * data area in case partitions are supported.
1684 ro = sdda_get_read_only(periph, ccb);
1685 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_DEFAULT, "sdda",
1686 periph->unit_number, mmc_get_media_size(periph), ro);
1687 sc->part_curr = EXT_CSD_PART_CONFIG_ACC_DEFAULT;
1689 if (mmc_get_spec_vers(periph) < 3)
1692 /* Belatedly announce enhanced user data slice. */
1693 if (sc->enh_size != 0) {
1694 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1695 ("enhanced user data area off 0x%jx size %ju bytes\n",
1696 sc->enh_base, sc->enh_size));
1700 * Determine partition switch timeout (provided in units of 10 ms)
1701 * and ensure it's at least 300 ms as some eMMC chips lie.
1703 sc->part_time = max(ext_csd[EXT_CSD_PART_SWITCH_TO] * 10 * 1000,
1706 /* Add boot partitions, which are of a fixed multiple of 128 KB. */
1707 size = ext_csd[EXT_CSD_BOOT_SIZE_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
1708 if (size > 0 && (sdda_get_host_caps(periph, ccb) & MMC_CAP_BOOT_NOACC) == 0) {
1709 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT0,
1710 SDDA_FMT_BOOT, 0, size,
1711 ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
1712 EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK) != 0));
1713 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT1,
1714 SDDA_FMT_BOOT, 1, size,
1715 ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
1716 EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK) != 0));
1719 /* Add RPMB partition, which also is of a fixed multiple of 128 KB. */
1720 size = ext_csd[EXT_CSD_RPMB_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
1721 if (rev >= 5 && size > 0)
1722 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_RPMB,
1723 SDDA_FMT_RPMB, 0, size, ro);
1725 if (rev <= 3 || comp == FALSE)
1729 * Add general purpose partitions, which are of a multiple of high
1730 * capacity write protect groups, too.
1732 if ((ext_csd[EXT_CSD_PART_SUPPORT] & EXT_CSD_PART_SUPPORT_EN) != 0) {
1733 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
1735 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1736 for (i = 0; i < MMC_PART_GP_MAX; i++) {
1737 size = ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3] +
1738 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 1] << 8) +
1739 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 2] << 16);
1742 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_GP0 + i,
1743 SDDA_FMT_GP, i, size * erase_size * wp_size, ro);
1749 * We cannot just call mmc_switch() since it will sleep, and we are in
1750 * GEOM context and cannot sleep. Instead, create an MMCIO request to switch
1751 * partitions and send it to h/w, and upon completion resume processing
1753 * This function cannot fail, instead check switch errors in sddadone().
1756 sdda_init_switch_part(struct cam_periph *periph, union ccb *start_ccb,
1759 struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1762 KASSERT(part < MMC_PART_MAX, ("%s: invalid partition index", __func__));
1763 sc->part_requested = part;
1765 value = (sc->raw_ext_csd[EXT_CSD_PART_CONFIG] &
1766 ~EXT_CSD_PART_CONFIG_ACC_MASK) | part;
1768 mmc_switch_fill_mmcio(start_ccb, EXT_CSD_CMD_SET_NORMAL,
1769 EXT_CSD_PART_CONFIG, value, sc->part_time);
1770 start_ccb->ccb_h.cbfcnp = sddadone;
1772 sc->outstanding_cmds++;
1773 cam_periph_unlock(periph);
1774 xpt_action(start_ccb);
1775 cam_periph_lock(periph);
1778 /* Called with periph lock held! */
1780 sddastart(struct cam_periph *periph, union ccb *start_ccb)
1783 struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1784 struct sdda_part *part;
1785 struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1788 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastart\n"));
1790 if (softc->state != SDDA_STATE_NORMAL) {
1791 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("device is not in SDDA_STATE_NORMAL yet\n"));
1792 xpt_release_ccb(start_ccb);
1796 /* Find partition that has outstanding commands. Prefer current partition. */
1797 part_index = softc->part_curr;
1798 part = softc->part[softc->part_curr];
1799 bp = bioq_first(&part->bio_queue);
1801 for (part_index = 0; part_index < MMC_PART_MAX; part_index++) {
1802 if ((part = softc->part[part_index]) != NULL &&
1803 (bp = bioq_first(&softc->part[part_index]->bio_queue)) != NULL)
1808 xpt_release_ccb(start_ccb);
1811 if (part_index != softc->part_curr) {
1812 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1813 ("Partition %d -> %d\n", softc->part_curr, part_index));
1815 * According to section "6.2.2 Command restrictions" of the eMMC
1816 * specification v5.1, CMD19/CMD21 aren't allowed to be used with
1817 * RPMB partitions. So we pause re-tuning along with triggering
1818 * it up-front to decrease the likelihood of re-tuning becoming
1819 * necessary while accessing an RPMB partition. Consequently, an
1820 * RPMB partition should immediately be switched away from again
1821 * after an access in order to allow for re-tuning to take place
1824 /* TODO: pause retune if switching to RPMB partition */
1825 softc->state = SDDA_STATE_PART_SWITCH;
1826 sdda_init_switch_part(periph, start_ccb, part_index);
1830 bioq_remove(&part->bio_queue, bp);
1832 switch (bp->bio_cmd) {
1834 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_WRITE\n"));
1835 part->flags |= SDDA_FLAG_DIRTY;
1839 struct ccb_mmcio *mmcio;
1840 uint64_t blockno = bp->bio_pblkno;
1841 uint16_t count = bp->bio_bcount / MMC_SECTOR_SIZE;
1844 if (bp->bio_cmd == BIO_READ)
1845 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_READ\n"));
1846 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
1847 ("Block %"PRIu64" cnt %u\n", blockno, count));
1849 /* Construct new MMC command */
1850 if (bp->bio_cmd == BIO_READ) {
1852 opcode = MMC_READ_MULTIPLE_BLOCK;
1854 opcode = MMC_READ_SINGLE_BLOCK;
1857 opcode = MMC_WRITE_MULTIPLE_BLOCK;
1859 opcode = MMC_WRITE_BLOCK;
1862 start_ccb->ccb_h.func_code = XPT_MMC_IO;
1863 start_ccb->ccb_h.flags = (bp->bio_cmd == BIO_READ ? CAM_DIR_IN : CAM_DIR_OUT);
1864 start_ccb->ccb_h.retry_count = 0;
1865 start_ccb->ccb_h.timeout = 15 * 1000;
1866 start_ccb->ccb_h.cbfcnp = sddadone;
1868 mmcio = &start_ccb->mmcio;
1869 mmcio->cmd.opcode = opcode;
1870 mmcio->cmd.arg = blockno;
1871 if (!(mmcp->card_features & CARD_FEATURE_SDHC))
1872 mmcio->cmd.arg <<= 9;
1874 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1875 mmcio->cmd.data = softc->mmcdata;
1876 memset(mmcio->cmd.data, 0, sizeof(struct mmc_data));
1877 mmcio->cmd.data->data = bp->bio_data;
1878 mmcio->cmd.data->len = MMC_SECTOR_SIZE * count;
1879 mmcio->cmd.data->flags = (bp->bio_cmd == BIO_READ ? MMC_DATA_READ : MMC_DATA_WRITE);
1880 /* Direct h/w to issue CMD12 upon completion */
1882 mmcio->cmd.data->flags |= MMC_DATA_MULTI;
1883 mmcio->stop.opcode = MMC_STOP_TRANSMISSION;
1884 mmcio->stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
1885 mmcio->stop.arg = 0;
1891 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_FLUSH\n"));
1892 sddaschedule(periph);
1895 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_DELETE\n"));
1896 sddaschedule(periph);
1899 biofinish(bp, NULL, EOPNOTSUPP);
1900 xpt_release_ccb(start_ccb);
1903 start_ccb->ccb_h.ccb_bp = bp;
1904 softc->outstanding_cmds++;
1906 cam_periph_unlock(periph);
1907 xpt_action(start_ccb);
1908 cam_periph_lock(periph);
1910 /* May have more work to do, so ensure we stay scheduled */
1911 sddaschedule(periph);
1915 sddadone(struct cam_periph *periph, union ccb *done_ccb)
1918 struct sdda_softc *softc;
1919 struct ccb_mmcio *mmcio;
1920 struct cam_path *path;
1921 uint32_t card_status;
1924 softc = (struct sdda_softc *)periph->softc;
1925 mmcio = &done_ccb->mmcio;
1926 path = done_ccb->ccb_h.path;
1928 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddadone\n"));
1929 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
1930 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("Error!!!\n"));
1931 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
1932 cam_release_devq(path,
1936 /*getcount_only*/0);
1939 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
1940 panic("REQ_CMP with QFRZN");
1944 card_status = mmcio->cmd.resp[0];
1945 CAM_DEBUG(path, CAM_DEBUG_TRACE,
1946 ("Card status: %08x\n", R1_STATUS(card_status)));
1947 CAM_DEBUG(path, CAM_DEBUG_TRACE,
1948 ("Current state: %d\n", R1_CURRENT_STATE(card_status)));
1950 /* Process result of switching MMC partitions */
1951 if (softc->state == SDDA_STATE_PART_SWITCH) {
1952 CAM_DEBUG(path, CAM_DEBUG_TRACE,
1953 ("Completing partition switch to %d\n",
1954 softc->part_requested));
1955 softc->outstanding_cmds--;
1956 /* Complete partition switch */
1957 softc->state = SDDA_STATE_NORMAL;
1959 /* TODO: Unpause retune if accessing RPMB */
1960 xpt_release_ccb(done_ccb);
1961 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1965 softc->raw_ext_csd[EXT_CSD_PART_CONFIG] =
1966 (softc->raw_ext_csd[EXT_CSD_PART_CONFIG] &
1967 ~EXT_CSD_PART_CONFIG_ACC_MASK) | softc->part_requested;
1968 /* TODO: Unpause retune if accessing RPMB */
1969 softc->part_curr = softc->part_requested;
1970 xpt_release_ccb(done_ccb);
1972 /* Return to processing BIO requests */
1973 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1977 bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
1978 bp->bio_error = error;
1980 bp->bio_resid = bp->bio_bcount;
1981 bp->bio_flags |= BIO_ERROR;
1983 /* XXX: How many bytes remaining? */
1985 if (bp->bio_resid > 0)
1986 bp->bio_flags |= BIO_ERROR;
1989 softc->outstanding_cmds--;
1990 xpt_release_ccb(done_ccb);
1992 * Release the periph refcount taken in sddastart() for each CCB.
1994 KASSERT(softc->refcount >= 1, ("sddadone softc %p refcount %d", softc, softc->refcount));
2000 sddaerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
2002 return(cam_periph_error(ccb, cam_flags, sense_flags));
2006 sddadump(void *arg, void *virtual, off_t offset, size_t length)
2008 struct ccb_mmcio mmcio;
2010 struct sdda_part *part;
2011 struct sdda_softc *softc;
2012 struct cam_periph *periph;
2013 struct mmc_params *mmcp;
2021 periph = softc->periph;
2022 mmcp = &periph->path->device->mmc_ident_data;
2024 if (softc->state != SDDA_STATE_NORMAL)
2027 count = length / MMC_SECTOR_SIZE;
2031 if (softc->part[softc->part_curr] != part)
2032 return (EIO); /* TODO implement polled partition switch */
2034 memset(&mmcio, 0, sizeof(mmcio));
2035 xpt_setup_ccb(&mmcio.ccb_h, periph->path, CAM_PRIORITY_NORMAL); /* XXX needed? */
2037 mmcio.ccb_h.func_code = XPT_MMC_IO;
2038 mmcio.ccb_h.flags = CAM_DIR_OUT;
2039 mmcio.ccb_h.retry_count = 0;
2040 mmcio.ccb_h.timeout = 15 * 1000;
2043 opcode = MMC_WRITE_MULTIPLE_BLOCK;
2045 opcode = MMC_WRITE_BLOCK;
2046 mmcio.cmd.opcode = opcode;
2047 mmcio.cmd.arg = offset / MMC_SECTOR_SIZE;
2048 if (!(mmcp->card_features & CARD_FEATURE_SDHC))
2049 mmcio.cmd.arg <<= 9;
2051 mmcio.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
2052 mmcio.cmd.data = softc->mmcdata;
2053 memset(mmcio.cmd.data, 0, sizeof(struct mmc_data));
2054 mmcio.cmd.data->data = virtual;
2055 mmcio.cmd.data->len = MMC_SECTOR_SIZE * count;
2056 mmcio.cmd.data->flags = MMC_DATA_WRITE;
2058 /* Direct h/w to issue CMD12 upon completion */
2060 mmcio.cmd.data->flags |= MMC_DATA_MULTI;
2061 mmcio.stop.opcode = MMC_STOP_TRANSMISSION;
2062 mmcio.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
2066 error = cam_periph_runccb((union ccb *)&mmcio, cam_periph_error,
2067 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL);
2069 printf("Aborting dump due to I/O error.\n");
2073 #endif /* _KERNEL */